| Age | Commit message (Collapse) | Author |
|---|
|
Using random mac address is not an error since the driver continues to
function, it should be informative that the system has not assigned
a MAC address. This is inline with other drivers such as ax88796c,
dm9051 etc. Drop the error level to info level.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250516122655.442808-1-nm@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As discussed in the thread containing
https://lore.kernel.org/linux-crypto/20250510053308.GB505731@sol/, the
Power10-optimized Poly1305 code is currently not safe to call in softirq
context. Disable it for now. It can be re-enabled once it is fixed.
Fixes: ba8f8624fde2 ("crypto: poly1305-p10 - Glue code for optmized Poly1305 implementation for ppc64le")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This reverts commit c66d7ebbe2fa14e41913adb421090a7426f59786.
Link: https://lore.kernel.org/all/02c22854-eebf-4ad1-b89e-8c2b65ab8236@csgroup.eu/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Error-handling paths in msm_pinctrl_probe() don't call
a function required to unroll restart handler registration,
unregister_restart_handler(). Instead of adding calls to this function,
switch the msm pinctrl code into using devm_register_sys_off_handler().
Fixes: cf1fc1876289 ("pinctrl: qcom: use restart_notifier mechanism for ps_hold")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-2-249999af0fc1@oss.qualcomm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
On Qualcomm platforms if the board uses GPIO hogs msm_pinmux_request()
calls gpiochip_line_is_valid(). After commit 8015443e24e7 ("gpio: Hide
valid_mask from direct assignments") gpiochip_line_is_valid() uses
gc->gpiodev, which is NULL when GPIO hog pins are being processed.
Thus after this commit using GPIO hogs causes the following crash. In
order to fix this, verify that gc->gpiodev is not NULL.
Note: it is not possible to reorder calls (e.g. by calling
msm_gpio_init() before pinctrl registration or by splitting
pinctrl_register() into _and_init() and pinctrl_enable() and calling the
latter function after msm_gpio_init()) because GPIO chip registration
would fail with EPROBE_DEFER if pinctrl is not enabled at the time of
registration.
pc : gpiochip_line_is_valid+0x4/0x28
lr : msm_pinmux_request+0x24/0x40
sp : ffff8000808eb870
x29: ffff8000808eb870 x28: 0000000000000000 x27: 0000000000000000
x26: 0000000000000000 x25: ffff726240f9d040 x24: 0000000000000000
x23: ffff7262438c0510 x22: 0000000000000080 x21: ffff726243ea7000
x20: ffffab13f2c4e698 x19: 0000000000000080 x18: 00000000ffffffff
x17: ffff726242ba6000 x16: 0000000000000100 x15: 0000000000000028
x14: 0000000000000000 x13: 0000000000002948 x12: 0000000000000003
x11: 0000000000000078 x10: 0000000000002948 x9 : ffffab13f50eb5e8
x8 : 0000000003ecb21b x7 : 000000000000002d x6 : 0000000000000b68
x5 : 0000007fffffffff x4 : ffffab13f52f84a8 x3 : ffff8000808eb804
x2 : ffffab13f1de8190 x1 : 0000000000000080 x0 : 0000000000000000
Call trace:
gpiochip_line_is_valid+0x4/0x28 (P)
pin_request+0x208/0x2c0
pinmux_enable_setting+0xa0/0x2e0
pinctrl_commit_state+0x150/0x26c
pinctrl_enable+0x6c/0x2a4
pinctrl_register+0x3c/0xb0
devm_pinctrl_register+0x58/0xa0
msm_pinctrl_probe+0x2a8/0x584
sdm845_pinctrl_probe+0x20/0x88
platform_probe+0x68/0xc0
really_probe+0xbc/0x298
__driver_probe_device+0x78/0x12c
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x208/0x5e8
worker_thread+0x1b4/0x35c
kthread+0x144/0x220
ret_from_fork+0x10/0x20
Code: b5fffba0 17fffff2 9432ec27 f9400400 (f9428800)
Fixes: 8015443e24e7 ("gpio: Hide valid_mask from direct assignments")
Reported-by: Doug Anderson <dianders@chromium.org>
Closes: https://lore.kernel.org/r/CAD=FV=Vg8_ZOLgLoC4WhFPzhVsxXFC19NrF38W6cW_W_3nFjbw@mail.gmail.com
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-1-249999af0fc1@oss.qualcomm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
io_uring_cmd_import_fixed_vec() is declared in both
include/linux/io_uring/cmd.h and io_uring/uring_cmd.h. The declarations
are identical (if redundant) for CONFIG_IO_URING=y. But if
CONFIG_IO_URING=N, include/linux/io_uring/cmd.h declares the function as
static inline while io_uring/uring_cmd.h declares it as extern. This
causes linker errors if the declaration in io_uring/uring_cmd.h is used.
Remove the declaration in io_uring/uring_cmd.h to avoid linker errors
and prevent the declarations getting out of sync.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: ef4902752972 ("io_uring/cmd: introduce io_uring_cmd_import_fixed_vec")
Link: https://lore.kernel.org/r/20250520193337.1374509-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Axel Forsman <axfo@kvaser.com> says:
This patch series fixes a couple of race conditions in the
kvaser_pciefd driver surfaced by enabling MSI interrupts and the new
Kvaser PCIe 8xCAN.
Changes since version 2:
* Rebase onto linux-can/main to resolve del_timer()/timer_delete()
merge conflict.
* Reword 2nd commit message slightly.
Changes since version 1:
* Change type of srb_cmd_reg from "__le32 __iomem *" to
"void __iomem *".
* Maintain TX FIFO count in driver instead of querying HW.
* Stop queue at end of .start_xmit() if full.
Link: https://patch.msgid.link/20250520114332.8961-1-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Going bus-off on a channel doing RX could result in dropped packets.
As netif_running() gets cleared before the channel abort procedure,
the handling of any last RDATA packets would see netif_rx() return
non-zero to signal a dropped packet. kvaser_pciefd_read_buffer() dealt
with this "error" by breaking out of processing the remaining DMA RX
buffer.
Only return an error from kvaser_pciefd_read_buffer() due to packet
corruption, otherwise handle it internally.
Cc: stable@vger.kernel.org
Signed-off-by: Axel Forsman <axfo@kvaser.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250520114332.8961-4-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The functions kvaser_pciefd_start_xmit() and
kvaser_pciefd_handle_ack_packet() raced to stop/wake TX queues and
get/put echo skbs, as kvaser_pciefd_can->echo_lock was only ever taken
when transmitting and KCAN_TX_NR_PACKETS_CURRENT gets decremented
prior to handling of ACKs. E.g., this caused the following error:
can_put_echo_skb: BUG! echo_skb 5 is occupied!
Instead, use the synchronization helpers in netdev_queues.h. As those
piggyback on BQL barriers, start updating in-flight packets and bytes
counts as well.
Cc: stable@vger.kernel.org
Signed-off-by: Axel Forsman <axfo@kvaser.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250520114332.8961-3-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Avoid the driver missing IRQs by temporarily masking IRQs in the ISR
to enforce an edge even if a different IRQ is signalled before handled
IRQs are cleared.
Fixes: 48f827d4f48f ("can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISR")
Cc: stable@vger.kernel.org
Signed-off-by: Axel Forsman <axfo@kvaser.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250520114332.8961-2-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add test for covering UBLK_AUTO_BUF_REG_FALLBACK:
- pass '--auto_zc_fallback' to null target, which requires both F_AUTO_BUF_REG
and F_SUPPORT_ZERO_COPY for handling UBLK_AUTO_BUF_REG_FALLBACK
- add ->buf_index() method for returning invalid buffer index to trigger
UBLK_AUTO_BUF_REG_FALLBACK
- add generic_09 for running the test
- add --auto_zc_fallback test in stress_03/stress_04/stress_05
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Enable UBLK_F_AUTO_BUF_REG support for ublk utility by argument `--auto_zc`,
meantime support this feature in null, loop and stripe target code.
Add function test generic_08 for covering basic UBLK_F_AUTO_BUF_REG feature.
Also cover UBLK_F_AUTO_BUF_REG in stress_03, stress_04 and stress_05 test too.
'fio/t/io_uring -p0 /dev/ublkb0' shows that F_AUTO_BUF_REG can improve
IOPS by 50% compared with F_SUPPORT_ZERO_COPY in my test VM.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For UBLK_F_AUTO_BUF_REG, buffer is registered to uring_cmd context
automatically with the provided buffer index. User may provide one wrong
buffer index, or the specified buffer is registered by application already.
Add UBLK_AUTO_BUF_REG_FALLBACK for supporting to auto buffer registering
fallback by completing the uring_cmd and telling ublk server the
register failure via UBLK_AUTO_BUF_REG_FALLBACK, then ublk server still
can register the buffer from userspace.
So we can provide reliable way for supporting auto buffer register.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
UBLK_F_AUTO_BUF_REG
Add UBLK_F_AUTO_BUF_REG for supporting to register buffer automatically
to local io_uring context with provided buffer index.
Add UAPI structure `struct ublk_auto_buf_reg` for holding user parameter
to register request buffer automatically, one 'flags' field is defined, and
there is still 32bit available for future extension, such as, adding one
io_ring FD field for registering buffer to external io_uring.
`struct ublk_auto_buf_reg` is populated from ublk uring_cmd's sqe->addr,
and all existing ublk commands are data-less, so it is just fine to reuse
sqe->addr for this purpose.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
UBLK_F_SUPPORT_ZERO_COPY requires ublk server to issue explicit buffer
register/unregister uring_cmd for each IO, this way is not only inefficient,
but also introduce dependency between buffer consumer and buffer register/
unregister uring_cmd, please see tools/testing/selftests/ublk/stripe.c
in which backing file IO has to be issued one by one by IOSQE_IO_LINK.
Prepare for adding feature UBLK_F_AUTO_BUF_REG for addressing the existing
zero copy limitation:
- register request buffer automatically to ublk uring_cmd's io_uring
context before delivering io command to ublk server
- unregister request buffer automatically from the ublk uring_cmd's
io_uring context when completing the request
- io_uring will unregister the buffer automatically when uring is
exiting, so we needn't worry about accident exit
For using this feature, ublk server has to create one sparse buffer table
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert to refcount_t and prepare for supporting to register bvec buffer
automatically, which needs to initialize reference counter as 2, and
kref doesn't provide this interface, so convert to refcount_t.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Suggested-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__run_io_and_remove() is used in several stress tests for running heavy
IO vs. removing device meantime.
However, sequential `readwrite` is taken in the fio script, which isn't
correct, we should take random IO for saturating ublk device.
Also turns out '--num_jobs=4' isn't stressful enough, so change it to
'--num_jobs=$(nproc)'.
Finally we don't cover single queue test in `test_stress_02.sh`, so add
single queue test which can trigger request tag recycling easier.
With above change the issue in #1 can be reproduced reliably in stress_02.sh.
Link:https://lore.kernel.org/linux-block/mruqwpf4tqenkbtgezv5oxwq7ngyq24jzeyqy4ixzvivatbbxv@4oh2wzz4e6qn/ #1
Cc: Jared Holzman <jholzman@nvidia.com>
Cc: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250519031620.245749-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
for-6.16/block
Pull NVMe updates from Christoph:
"nvme updates for Linux 6.16
- add per-node DMA pools and use them for PRP/SGL allocations
(Caleb Sander Mateos, Keith Busch)
- nvme-fcloop refcounting fixes (Daniel Wagner)
- support delayed removal of the multipath node and optionally support
the multipath node for private namespaces (Nilay Shroff)
- support shared CQs in the PCI endpoint target code (Wilfred Mallawa)
- support admin-queue only authentication (Hannes Reinecke)
- use the crc32c library instead of the crypto API (Eric Biggers)
- misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes Reinecke,
Leon Romanovsky, Gustavo A. R. Silva)"
* tag 'nvme-6.16-2025-05-20' of git://git.infradead.org/nvme: (42 commits)
nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk
nvme: introduce multipath_always_on module param
nvme-multipath: introduce delayed removal of the multipath head node
nvme-pci: derive and better document max segments limits
nvme-pci: use struct_size for allocation struct nvme_dev
nvme-pci: add a symolic name for the small pool size
nvme-pci: use a better encoding for small prp pool allocations
nvme-pci: rename the descriptor pools
nvme-pci: remove struct nvme_descriptor
nvme-pci: store aborted state in flags variable
nvme-pci: don't try to use SGLs for metadata on the admin queue
nvme-pci: make PRP list DMA pools per-NUMA-node
nvme-pci: factor out a nvme_init_hctx_common() helper
dmapool: add NUMA affinity support
nvme-fc: do not reference lsrsp after failure
nvmet-fcloop: don't wait for lport cleanup
nvmet-fcloop: add missing fcloop_callback_host_done
nvmet-fc: take tgtport refs for portentry
nvmet-fc: free pending reqs on tgtport unregister
nvmet-fcloop: drop response if targetport is gone
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs fix from Mike Marshall:
"Fix for orangefs page writeout counting"
* tag 'for-linus-6.15-ofs2' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: adjust counting code to recover from 665575cf
|
|
Block devices can be opened read-write even if they can't be written to
for historic reasons. Remove the check requiring file->f_op->write_iter
when the block devices was opened in loop_configure. The call to
loop_check_backing_file just below ensures the ->write_iter is present
for backing files opened for writing, which is the only check that is
actually needed.
Fixes: f5c84eff634b ("loop: Add sanity check for read/write_iter")
Reported-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250520135420.1177312-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A late commit to 6.14-rc7! broke orangefs. 665575cf seems like a
good change, but maybe should have been introduced during the merge
window. This patch adjusts the counting code associated with
writing out pages so that orangefs works in a 665575cf world.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
New HP ZBook with Realtek HDA codec ALC3247 needs the quirk
ALC236_FIXUP_HP_GPIO_LED to fix the micmute LED.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250520132101.120685-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add support for HP Agusta.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250520124757.12597-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
strcpy() is deprecated; use strscpy() instead.
Both the destination and source buffer are of fixed length
so strscpy with 2-arguments is used.
No functional changes intended.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Siddarth Gundu <siddarthsgml@gmail.com>
Link: https://patch.msgid.link/20250520113012.70270-1-siddarthsgml@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-05-20
this is a pull request of 3 patches for net/main.
The 1st patch is by Rob Herring, and fixes the $id path in the
microchip,mcp2510.yaml device tree bindinds documentation.
The last 2 patches are from Oliver Hartkopp and fix a use-after-free
read and an out-of-bounds read in the CAN Broadcast Manager (BCM)
protocol.
linux-can-fixes-for-6.15-20250520
* tag 'linux-can-fixes-for-6.15-20250520' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: bcm: add missing rcu read protection for procfs content
can: bcm: add locking for bcm_op runtime updates
dt-bindings: can: microchip,mcp2510: Fix $id path
====================
Link: https://patch.msgid.link/20250520091424.142121-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This adds a match entry for using all the amps on a CDB35L63-CB2 board
without the CS42L43 codec. Configuration is:
SDW3: 1x CS35L63 (OUT1)
SDW1: 1x CS35L63 (OUT2)
Speaker playback and amp feedback are aggregated.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250516152107.210994-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
CS35L63 is very similar to CS35L56, and uses the same driver, so we
can use the same configuration.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250516152107.210994-2-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the previously parsed DisCo information from ACPI to create the DAI
drivers required to connect an SDCA Function into an ASoC soundcard.
Create DAI driver structures and populate the supported sample rates
and sample widths into them based on the Input/Output Terminal and any
attach Clock Source entities. More complex relationships with channels
etc. will be added later as constraints as part of the DAI startup.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the previously parsed DisCo information from ACPI to create the
ALSA controls required by an SDCA Function. This maps all User and
Application level SDCA Controls to ALSA controls. Typically controls
marked with those access levels are just volumes and mutes.
SDCA defines volume controls as an integer in 1/256ths of a dB and
then provides a mechanism to specify what values are valid (range
templates). Currently only a simple case of a single linear volume
range with a power of 2 step size is supported. This allows the code
to expose the volume control using a simple shift. This will need
expanded in the future, to support more complex ranges and probably
also some additional control types but this should be sufficient to
for a first pass.
For non-dataport terminal widgets also add a pin switch to allow
that endpoint to be turned on/off.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the previously parsed DisCo information from ACPI to create DAPM
widgets and routes representing a SDCA Function. For the most part SDCA
maps well to the DAPM abstractions.
The primary point of interest is the SDCA Power Domain Entities
(PDEs), which actually control the power status of the device. Whilst
these PDEs are the primary widgets the other parts of the SDCA graph
are added to maintain a consistency with the hardware abstract,
and allow routing to take effect. As for the PDEs themselves the
code currently only handle PS0 and PS3 (basically on and off),
the two intermediate power states are not commonly used and don't
map well to ASoC/DAPM.
Other minor points of slightly complexity include, the Group Entities
(GEs) these set the value of several other controls, typically
Selector Units (SUs) for enabling a cetain jack configuration. Multiple
SUs being controlled by a GE are easily modelled creating a single
control and sharing it among the controlled muxes.
SDCA also has a slight habit of having fully connected paths, relying
more on activating the PDEs to enable functionality. This doesn't
map quite so perfectly to DAPM which considers the path a reason to
power the PDE. Whilst in the current specification Mixer Units are
defined as fixed-function, in DAPM we create a virtual control for
each input (which defaults to connected). This allows paths to be
connected/disconnected, providing a more ASoC style approach to
managing the power. PIN_SWITCHs will also be added for non-dataport
terminal entities in a later patch along with the other ALSA controls,
providing greater flexibility in power management.
A top level helper sdca_asoc_populate_component() is exported that
counts and allocates everything, however, the intermediate counting and
population functions are also exported. This will allow end drivers to
do allocation and add custom handling, which is probably fairly likely
for the early SDCA devices.
Clock muxes are currently not fully supported, so some future work will
also be required there.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The core currently supports pin switches for source/sink widgets, but
only at the card level. SDCA components specify the fabric at the
level of the individual components, to support this add helpers to
allow component level pin switches.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move the allocation of the PDE delays array until after the size has
been adjusted, this saves an additional division and simplifies the
code slightly.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no need to include MODULE_LICENSE() and MODULE_DESCRIPTION() in
sdca_regmap.c as this file is part of a larger module that already
defines these.
Fixes: e3f7caf74b79 ("ASoC: SDCA: Add generic regmap SDCA helpers")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix minor typo SDAC -> SDCA.
Fixes: 42b144cb6a2d ("ASoC: SDCA: Add SDCA Control parsing")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A few, quite rare, WMI attributes have names that are not compatible with
filenames, e.g. "Intel VT for Directed I/O (VT-d)".
For these cases the '/' gets replaced with '\' for display, but doesn't
get switched again when doing the WMI access.
Fix this by keeping the original attribute name and using that for sending
commands to the BIOS
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250520005027.3840705-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If user modifies the battery charge threshold an ACPI event is generated.
Confirmed with Lenovo FW team this is only generated on user event. As no
action is needed, ignore the event and prevent spurious kernel logs.
Reported-by: Derek Barbosa <debarbos@redhat.com>
Closes: https://lore.kernel.org/platform-driver-x86/7e9a1c47-5d9c-4978-af20-3949d53fb5dc@app.fastmail.com/T/#m5f5b9ae31d3fbf30d7d9a9d76c15fb3502dfd903
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250517023348.2962591-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Merge series from Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>:
This patchset adds support for sound card on Qualcomm QCS9100 and
QCS9075 boards.
|
|
The function sdm845_slim_snd_hw_params() calls the functuion
snd_soc_dai_set_channel_map() but does not check its return
value. A proper implementation can be found in msm_snd_hw_params().
Add error handling for snd_soc_dai_set_channel_map(). If the
function fails and it is not a unsupported error, return the
error code immediately.
Fixes: 5caf64c633a3 ("ASoC: qcom: sdm845: add support to DB845c and Lenovo Yoga")
Cc: stable@vger.kernel.org # v5.6
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250519075739.1458-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Lenovo Yoga Pro 7 (gen 10) with Realtek ALC3306 and combined CS35L56
amplifiers need quirk ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN to
enable bass
Signed-off-by: Ed Burcher <git@edburcher.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250519224907.31265-2-git@edburcher.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In the NVMe context, the term "shutdown" has a specific technical
meaning. To avoid confusion, this commit renames the nvme_mpath_
shutdown_disk function to nvme_mpath_remove_disk to better reflect
its purpose (i.e. removing the disk from the system). However,
nvme_mpath_remove_disk was already in use, and its functionality
is related to releasing or putting the head node disk. To resolve
this naming conflict and improve clarity, the existing nvme_mpath_
remove_disk function is also renamed to nvme_mpath_put_disk.
This renaming improves code readability and better aligns function
names with their actual roles.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Currently, a multipath head disk node is not created for single-
ported NVMe adapters or private namespaces with non-unique NSID.
However, creating a head node in these cases can help transparently
handle transient PCIe link failures. Without a head node, features
like delayed removal cannot be leveraged, making it difficult to
tolerate such link failures. To address this, this commit introduces
nvme_core module parameter multipath_always_on.
When multipath_always_on is set to true, it forces the creation of a
multipath head node regardless NVMe disk or namespace type. So this
option allows the use of delayed removal of head node functionality
even for single-ported NVMe disks and private namespaces with a unique
NSID and thus helps transparently handle transient PCIe link failures.
By default multipath_always_on is set to false, thus preserving the
existing behavior. Setting it to true enables improved fault tolerance
in PCIe setups. Moreover, please note that enabling this option would
also implicitly enable nvme_core.multipath.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Currently, the multipath head node of an NVMe disk is removed
immediately as soon as all paths of the disk are removed. However,
this can cause issues in scenarios where:
- The disk hot-removal followed by re-addition.
- Transient PCIe link failures that trigger re-enumeration,
temporarily removing and then restoring the disk.
In these cases, removing the head node prematurely may lead to a head
disk node name change upon re-addition, requiring applications to
reopen their handles if they were performing I/O during the failure.
To address this, introduce a delayed removal mechanism of head disk
node. During transient failure, instead of immediate removal of head
disk node, the system waits for a configurable timeout, allowing the
disk to recover.
During transient disk failure, if application sends any IO then we
queue it instead of failing such IO immediately. If the disk comes back
online within the timeout, the queued IOs are resubmitted to the disk
ensuring seamless operation. In case disk couldn't recover from the
failure then queued IOs are failed to its completion and application
receives the error.
So this way, if disk comes back online within the configured period,
the head node remains unchanged, ensuring uninterrupted workloads
without requiring applications to reopen device handles.
A new sysfs attribute, named "delayed_removal_secs" is added under head
disk blkdev for user who wish to configure time for the delayed removal
of head disk node. The default value of this attribute is set to zero
second ensuring no behavior change unless explicitly configured.
Link: https://lore.kernel.org/linux-nvme/Y9oGTKCFlOscbPc2@infradead.org/
Link: https://lore.kernel.org/linux-nvme/Y+1aKcQgbskA2tra@kbusch-mbp.dhcp.thefacebook.com/
Suggested-by: Keith Busch <kbusch@kernel.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
[nilay: reworked based on the original idea/POC from Christoph and Keith]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Redefine the max segments and max integrity limits based on the limiting
factors. This keeps exactly the same values for 4k PAGE_SIZE systems,
but increases the number of segments for larger page size as it properly
derives the scatterlist allocation based limit for them instead of
assuming a 4k PAGE_SIZE.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
|
|
This avoids open coding the variable size array arithmetics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
|
|
Open coding magic numbers in multiple places is never a good idea.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
|
|
Add a separate flag to encode that the transfer is using the small
page sized pool, and use a normal 0..n count for the number of
descriptors.
Contains improvements and suggestions from Kanchan Joshi
<joshi.k@samsung.com> and Leon Romanovsky <leon@kernel.org>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
|
|
They are used for both PRPs and SGLs, and we use descriptor elsewhere
when referring to their allocations, so use that name here as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
|
|
There is no real point in having a union of two pointer types here, just
use a void pointer as we mix and match types between the arms of the
union between the allocation and freeing side already.
Also rename the nr_allocations field to nr_descriptors to better describe
what it does.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[leon: ported forward to include metadata SGL support]
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
Instead of keeping dedicated "bool aborted" variable, switch to a flags
flags that can be used for other flags as well.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
|
|
No admin command defined in an NVMe specification supports metadata,
but to protect against vendor specific commands using metadata ensure
that we don't try to use SGLs for metadata on the admin queue, as NVMe
does not support SGLs on the admin queue for the PCI transport. Do
this by checking if the data transfer has been setup using SGLs as
that is required for using SGLs for metadata.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
|
