summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-24igc: Add support for PTP getcrosststamp()Vinicius Costa Gomes
i225 supports PCIe Precision Time Measurement (PTM), allowing us to support the PTP_SYS_OFFSET_PRECISE ioctl() in the driver via the getcrosststamp() function. The easiest way to expose the PTM registers would be to configure the PTM dialogs to run periodically, but the PTP_SYS_OFFSET_PRECISE ioctl() semantics are more aligned to using a kind of "one-shot" way of retrieving the PTM timestamps. But this causes a bit more code to be written: the trigger registers for the PTM dialogs are not cleared automatically. i225 can be configured to send "fake" packets with the PTM information, adding support for handling these types of packets is left for the future. PTM improves the accuracy of time synchronization, for example, using phc2sys, while a simple application is sending packets as fast as possible. First, without .getcrosststamp(): phc2sys[191.382]: enp4s0 sys offset -959 s2 freq -454 delay 4492 phc2sys[191.482]: enp4s0 sys offset 798 s2 freq +1015 delay 4069 phc2sys[191.583]: enp4s0 sys offset 962 s2 freq +1418 delay 3849 phc2sys[191.683]: enp4s0 sys offset 924 s2 freq +1669 delay 3753 phc2sys[191.783]: enp4s0 sys offset 664 s2 freq +1686 delay 3349 phc2sys[191.883]: enp4s0 sys offset 218 s2 freq +1439 delay 2585 phc2sys[191.983]: enp4s0 sys offset 761 s2 freq +2048 delay 3750 phc2sys[192.083]: enp4s0 sys offset 756 s2 freq +2271 delay 4061 phc2sys[192.183]: enp4s0 sys offset 809 s2 freq +2551 delay 4384 phc2sys[192.283]: enp4s0 sys offset -108 s2 freq +1877 delay 2480 phc2sys[192.383]: enp4s0 sys offset -1145 s2 freq +807 delay 4438 phc2sys[192.484]: enp4s0 sys offset 571 s2 freq +2180 delay 3849 phc2sys[192.584]: enp4s0 sys offset 241 s2 freq +2021 delay 3389 phc2sys[192.684]: enp4s0 sys offset 405 s2 freq +2257 delay 3829 phc2sys[192.784]: enp4s0 sys offset 17 s2 freq +1991 delay 3273 phc2sys[192.884]: enp4s0 sys offset 152 s2 freq +2131 delay 3948 phc2sys[192.984]: enp4s0 sys offset -187 s2 freq +1837 delay 3162 phc2sys[193.084]: enp4s0 sys offset -1595 s2 freq +373 delay 4557 phc2sys[193.184]: enp4s0 sys offset 107 s2 freq +1597 delay 3740 phc2sys[193.284]: enp4s0 sys offset 199 s2 freq +1721 delay 4010 phc2sys[193.385]: enp4s0 sys offset -169 s2 freq +1413 delay 3701 phc2sys[193.485]: enp4s0 sys offset -47 s2 freq +1484 delay 3581 phc2sys[193.585]: enp4s0 sys offset -65 s2 freq +1452 delay 3778 phc2sys[193.685]: enp4s0 sys offset 95 s2 freq +1592 delay 3888 phc2sys[193.785]: enp4s0 sys offset 206 s2 freq +1732 delay 4445 phc2sys[193.885]: enp4s0 sys offset -652 s2 freq +936 delay 2521 phc2sys[193.985]: enp4s0 sys offset -203 s2 freq +1189 delay 3391 phc2sys[194.085]: enp4s0 sys offset -376 s2 freq +955 delay 2951 phc2sys[194.185]: enp4s0 sys offset -134 s2 freq +1084 delay 3330 phc2sys[194.285]: enp4s0 sys offset -22 s2 freq +1156 delay 3479 phc2sys[194.386]: enp4s0 sys offset 32 s2 freq +1204 delay 3602 phc2sys[194.486]: enp4s0 sys offset 122 s2 freq +1303 delay 3731 Statistics for this run (total of 2179 lines), in nanoseconds: average: -1.12 stdev: 634.80 max: 1551 min: -2215 With .getcrosststamp() via PCIe PTM: phc2sys[367.859]: enp4s0 sys offset 6 s2 freq +1727 delay 0 phc2sys[367.959]: enp4s0 sys offset -2 s2 freq +1721 delay 0 phc2sys[368.059]: enp4s0 sys offset 5 s2 freq +1727 delay 0 phc2sys[368.160]: enp4s0 sys offset -1 s2 freq +1723 delay 0 phc2sys[368.260]: enp4s0 sys offset -4 s2 freq +1719 delay 0 phc2sys[368.360]: enp4s0 sys offset -5 s2 freq +1717 delay 0 phc2sys[368.460]: enp4s0 sys offset 1 s2 freq +1722 delay 0 phc2sys[368.560]: enp4s0 sys offset -3 s2 freq +1718 delay 0 phc2sys[368.660]: enp4s0 sys offset 5 s2 freq +1725 delay 0 phc2sys[368.760]: enp4s0 sys offset -1 s2 freq +1721 delay 0 phc2sys[368.860]: enp4s0 sys offset 0 s2 freq +1721 delay 0 phc2sys[368.960]: enp4s0 sys offset 0 s2 freq +1721 delay 0 phc2sys[369.061]: enp4s0 sys offset 4 s2 freq +1725 delay 0 phc2sys[369.161]: enp4s0 sys offset 1 s2 freq +1724 delay 0 phc2sys[369.261]: enp4s0 sys offset 4 s2 freq +1727 delay 0 phc2sys[369.361]: enp4s0 sys offset 8 s2 freq +1732 delay 0 phc2sys[369.461]: enp4s0 sys offset 7 s2 freq +1733 delay 0 phc2sys[369.561]: enp4s0 sys offset 4 s2 freq +1733 delay 0 phc2sys[369.661]: enp4s0 sys offset 1 s2 freq +1731 delay 0 phc2sys[369.761]: enp4s0 sys offset 1 s2 freq +1731 delay 0 phc2sys[369.861]: enp4s0 sys offset -5 s2 freq +1725 delay 0 phc2sys[369.961]: enp4s0 sys offset -4 s2 freq +1725 delay 0 phc2sys[370.062]: enp4s0 sys offset 2 s2 freq +1730 delay 0 phc2sys[370.162]: enp4s0 sys offset -7 s2 freq +1721 delay 0 phc2sys[370.262]: enp4s0 sys offset -3 s2 freq +1723 delay 0 phc2sys[370.362]: enp4s0 sys offset 1 s2 freq +1726 delay 0 phc2sys[370.462]: enp4s0 sys offset -3 s2 freq +1723 delay 0 phc2sys[370.562]: enp4s0 sys offset -1 s2 freq +1724 delay 0 phc2sys[370.662]: enp4s0 sys offset -4 s2 freq +1720 delay 0 phc2sys[370.762]: enp4s0 sys offset -7 s2 freq +1716 delay 0 phc2sys[370.862]: enp4s0 sys offset -2 s2 freq +1719 delay 0 Statistics for this run (total of 2179 lines), in nanoseconds: average: 0.14 stdev: 5.03 max: 48 min: -27 For reference, the statistics for runs without PCIe congestion show that the improvements from enabling PTM are less dramatic. For two runs of 16466 entries: without PTM: avg -0.04 stdev 10.57 max 39 min -42 with PTM: avg 0.01 stdev 4.20 max 19 min -16 One possible explanation is that when PTM is not enabled, and there's a lot of traffic in the PCIe fabric, some register reads will take more time than the others because of congestion on the PCIe fabric. When PTM is enabled, even if the PTM dialogs take more time to complete under heavy traffic, the time measurements do not depend on the time to read the registers. This was implemented following the i225 EAS version 0.993. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-24igc: Enable PCIe PTMVinicius Costa Gomes
Enables PCIe PTM (Precision Time Measurement) support in the igc driver. Notifies the PCI devices that PCIe PTM should be enabled. PCIe PTM is similar protocol to PTP (Precision Time Protocol) running in the PCIe fabric, it allows devices to report time measurements from their internal clocks and the correlation with the PCIe root clock. The i225 NIC exposes some registers that expose those time measurements, those registers will be used, in later patches, to implement the PTP_SYS_OFFSET_PRECISE ioctl(). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-24PCI: Add pcie_ptm_enabled()Vinicius Costa Gomes
Add a predicate that returns if PCIe PTM (Precision Time Measurement) is enabled. It will only return true if it's enabled in all the ports in the path from the device to the root. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-24Revert "PCI: Make pci_enable_ptm() private"Vinicius Costa Gomes
Make pci_enable_ptm() accessible from the drivers. Exposing this to the driver enables the driver to use the 'ptm_enabled' field of 'pci_dev' to check if PTM is enabled or not. This reverts commit ac6c26da29c1 ("PCI: Make pci_enable_ptm() private"). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Several small fixes, the first three are significant: - mlx5 crash unloading drivers with a rare HW config - missing userspace reporting for the new dmabuf objects - random rxe failure due to missing memory zeroing - static checker/etc reports: missing spin lock init, null pointer deref on error, extra unlock on error path, memory allocation under spinlock, missing IRQ vector cleanup - kconfig typo in the new irdma driver" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/rxe: Zero out index member of struct rxe_queue RDMA/efa: Free IRQ vectors on error flow RDMA/rxe: Fix memory allocation while in a spin lock RDMA/bnxt_re: Remove unpaired rtnl unlock in bnxt_re_dev_init() IB/hfi1: Fix possible null-pointer dereference in _extend_sdma_tx_descs() RDMA/irdma: Use correct kconfig symbol for AUXILIARY_BUS RDMA/bnxt_re: Add missing spin lock initialization RDMA/uverbs: Track dmabuf memory regions RDMA/mlx5: Fix crash when unbind multiport slave
2021-08-24Merge branch 'ethtool-extend-coalesce-uapi'Jakub Kicinski
Yufeng Mo says: ==================== ethtool: extend coalesce uAPI In order to support some configuration in coalesce uAPI, this series extend coalesce uAPI and add support for CQE mode. Below is some test result with HNS3 driver: 1. old ethtool(ioctl) + new kernel: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 20 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 20 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 2. ethtool(netlink with cqe mode) + kernel without cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a CQE mode RX: n/a TX: n/a 3. ethool(netlink with cqe mode) + kernel with cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a CQE mode RX: off TX: off 4. ethool(netlink without cqe mode) + kernel with cqe mode: estuary:/$ ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: on TX: on stats-block-usecs: n/a sample-interval: n/a pkt-rate-low: n/a pkt-rate-high: n/a rx-usecs: 20 rx-frames: 0 rx-usecs-irq: n/a rx-frames-irq: n/a tx-usecs: 20 tx-frames: 0 tx-usecs-irq: n/a tx-frames-irq: n/a rx-usecs-low: n/a rx-frame-low: n/a tx-usecs-low: n/a tx-frame-low: n/a rx-usecs-high: 0 rx-frame-high: n/a tx-usecs-high: 0 tx-frame-high: n/a Change log: V2 -> V3: fix some warning on W=1 builds in #2 V1 -> V2: 1. fix compile error using allmodconfig in #2 2. move some property-related modifications from #2 to #1 for better review suggested by Jakub Kicinski. Change log from RFC: V3 -> V4: add document explaining the difference between CQE and EQE in #1 suggested by Jakub Kicinski. V2 -> V3: 1. split #1 into adding new parameter and adding new attributes. 2. use NLA_POLICY_MAX(NLA_U8, 1) instead of NLA_U8. 3. modify the description of CQE in Document. V1 -> V2: refactor #1&#2 in V1 suggestted by Jakub Kicinski. ==================== Link: https://lore.kernel.org/r/1629444920-25437-1-git-send-email-moyufeng@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24net: hns3: add ethtool support for CQE/EQE mode configurationYufeng Mo
Add support in ethtool for switching EQE/CQE mode. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24net: hns3: add support for EQE/CQE mode configurationYufeng Mo
For device whose version is above V3(include V3), the GL can select EQE or CQE mode, so adds support for it. In CQE mode, the coalesced timer will restart when the first new completion occurs, while in EQE mode, the timer will not restart. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24ethtool: add two coalesce attributes for CQE modeYufeng Mo
Currently, there are many drivers who support CQE mode configuration, some configure it as a fixed when initialized, some provide an interface to change it by ethtool private flags. In order to make it more generic, add two new 'ETHTOOL_A_COALESCE_USE_CQE_TX' and 'ETHTOOL_A_COALESCE_USE_CQE_RX' coalesce attributes, then these parameters can be accessed by ethtool netlink coalesce uAPI. Also add an new structure kernel_ethtool_coalesce, then the new parameter can be added into this struct. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24netdevice: move xdp_rxq within netdev_rx_queueJakub Kicinski
Both struct netdev_rx_queue and struct xdp_rxq_info are cacheline aligned. This causes extra padding before and after the xdp_rxq member. Move the member upfront, so that it's naturally aligned. Before: /* size: 256, cachelines: 4, members: 6 */ /* sum members: 160, holes: 1, sum holes: 40 */ /* padding: 56 */ /* paddings: 1, sum paddings: 36 */ /* forced alignments: 1, forced holes: 1, sum forced holes: 40 */ After: /* size: 192, cachelines: 3, members: 6 */ /* padding: 32 */ /* paddings: 1, sum paddings: 36 */ /* forced alignments: 1 */ Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/r/20210823180135.1153608-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24r8169: enable ASPM L0s stateHeiner Kallweit
ASPM is disabled completely because we've seen different types of problems in the past. However it seems these problems occurred with L1 or L1 sub-states only. On all the chip versions I've seen the acceptable L0s exit latency is 512ns. This should be short enough not to cause problems. If the actual L0s exit latency of the PCIe link is bigger than 512ns then the PCI core will disable L0s anyway. So let's give it a try and disable L1 and L1 sub-states only. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24net: dsa: mv88e6xxx: Update mv88e6393x serdes errataNathan Rossi
In early erratas this issue only covered port 0 when changing from [x]MII (rev A 3.6). In subsequent errata versions this errata changed to cover the additional "Hardware reset in CPU managed mode" condition, and removed the note specifying that it only applied to port 0. In designs where the device is configured with CPU managed mode (CPU_MGD), on reset all SERDES ports (p0, p9, p10) have a stuck power down bit and require this initial power up procedure. As such apply this errata to all three SERDES ports of the mv88e6393x. Signed-off-by: Nathan Rossi <nathan.rossi@digi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24page_pool: use relaxed atomic for release side accountingYunsheng Lin
There is no need to synchronize the account updating, so use the relaxed atomic to avoid some memory barrier in the data path. Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24ipv6: correct comments about fib6_node sernumzhang kai
correct comments in set and get fn_sernum Signed-off-by: zhang kai <zhangkaiheb@126.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24Merge branch 'dsa-sw-bridging'David S. Miller
Vladimir Oltean says: ==================== Plug holes in DSA's software bridging support Changes in v2: - Make sure that leaving an unoffloaded bridge works well too - Remove a set but unused variable - Tweak a commit message This series addresses some oddities reported by Alvin while he was working on the new rtl8365mb driver (a driver which does not implement bridge offloading for now, and relies on software bridging). First is that DSA behaves, in the lack of a .port_bridge_join method, as if the operation succeeds, and does not kick off its internal procedures for software bridging (the same procedures that were written for indirect software bridging, meaning bridging with an unoffloaded software LAG). Second is that even after being patched to treat ports with software bridging as standalone, we still don't get rid of bridge VLANs, even though we have code to ignore them, that code manages to get bypassed. This is in fact a recurring issue which was brought up by Tobias Waldekranz a while ago, but the solution never made it to the git tree. After debugging with Florian the last time: https://patchwork.kernel.org/project/netdevbpf/patch/20210320225928.2481575-3-olteanv@gmail.com/ I became very concerned about sending these patches to stable kernels. They are relatively large reworks, and they are only tested properly on net-next. A few commands on my test vehicle which has ds->vlan_filtering_is_global set to true: | Nothing is committed to hardware when we add VLAN 100 on a standalone | port $ ip link add link sw0p2 name sw0p2.100 type vlan id 100 | When a neighbor port joins a VLAN-aware bridge, VLAN filtering gets | enabled globally on the switch. This replays the VLAN 100 from | sw0p2.100 and also installs VLAN 1 from the bridge on sw0p0. $ ip link add br0 type bridge vlan_filtering 1 && ip link set sw0p0 master br0 [ 97.948087] sja1105 spi2.0: Reset switch and programmed static config. Reason: VLAN filtering [ 97.957989] sja1105 spi2.0: sja1105_bridge_vlan_add: port 2 vlan 100 [ 97.964442] sja1105 spi2.0: sja1105_bridge_vlan_add: port 4 vlan 100 [ 97.971202] device sw0p0 entered promiscuous mode [ 97.976129] sja1105 spi2.0: sja1105_bridge_vlan_add: port 0 vlan 1 [ 97.982640] sja1105 spi2.0: sja1105_bridge_vlan_add: port 4 vlan 1 | We can see that sw0p2, the standalone port, is now filtering because | of the bridge $ ethtool -k sw0p2 | grep vlan rx-vlan-filter: on [fixed] | When we make the bridge VLAN-unaware, the 8021q upper sw0p2.100 is | uncomitted from hardware. The VLANs managed by the bridge still remain | committed to hardware, because they are managed by the bridge. $ ip link set br0 type bridge vlan_filtering 0 [ 134.218869] sja1105 spi2.0: Reset switch and programmed static config. Reason: VLAN filtering [ 134.228913] sja1105 spi2.0: sja1105_bridge_vlan_del: port 2 vlan 100 | And now the standalone port is not filtering anymore. ethtool -k sw0p2 | grep vlan rx-vlan-filter: off [fixed] The same test with .port_bridge_join and .port_bridge_leave commented out from this driver: | Not a flinch $ ip link add link sw0p2 name sw0p2.100 type vlan id 100 $ ip link add br0 type bridge vlan_filtering 1 && ip link set sw0p0 master br0 Warning: dsa_core: Offloading not supported. $ ethtool -k sw0p2 | grep vlan rx-vlan-filter: off [fixed] $ ip link set br0 type bridge vlan_filtering 0 $ ethtool -k sw0p2 | grep vlan rx-vlan-filter: off [fixed] ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24net: dsa: let drivers state that they need VLAN filtering while standaloneVladimir Oltean
As explained in commit e358bef7c392 ("net: dsa: Give drivers the chance to veto certain upper devices"), the hellcreek driver uses some tricks to comply with the network stack expectations: it enforces port separation in standalone mode using VLANs. For untagged traffic, bridging between ports is prevented by using different PVIDs, and for VLAN-tagged traffic, it never accepts 8021q uppers with the same VID on two ports, so packets with one VLAN cannot leak from one port to another. That is almost fine*, and has worked because hellcreek relied on an implicit behavior of the DSA core that was changed by the previous patch: the standalone ports declare the 'rx-vlan-filter' feature as 'on [fixed]'. Since most of the DSA drivers are actually VLAN-unaware in standalone mode, that feature was actually incorrectly reflecting the hardware/driver state, so there was a desire to fix it. This leaves the hellcreek driver in a situation where it has to explicitly request this behavior from the DSA framework. We configure the ports as follows: - Standalone: 'rx-vlan-filter' is on. An 8021q upper on top of a standalone hellcreek port will go through dsa_slave_vlan_rx_add_vid and will add a VLAN to the hardware tables, giving the driver the opportunity to refuse it through .port_prechangeupper. - Bridged with vlan_filtering=0: 'rx-vlan-filter' is off. An 8021q upper on top of a bridged hellcreek port will not go through dsa_slave_vlan_rx_add_vid, because there will not be any attempt to offload this VLAN. The driver already disables VLAN awareness, so that upper should receive the traffic it needs. - Bridged with vlan_filtering=1: 'rx-vlan-filter' is on. An 8021q upper on top of a bridged hellcreek port will call dsa_slave_vlan_rx_add_vid, and can again be vetoed through .port_prechangeupper. *It is not actually completely fine, because if I follow through correctly, we can have the following situation: ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 # lan0 now becomes VLAN-unaware ip link set lan0 nomaster # lan0 fails to become VLAN-aware again, therefore breaking isolation This patch fixes that corner case by extending the DSA core logic, based on this requested attribute, to change the VLAN awareness state of the switch (port) when it leaves the bridge. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24net: dsa: don't advertise 'rx-vlan-filter' when not neededVladimir Oltean
There have been multiple independent reports about dsa_slave_vlan_rx_add_vid being called (and consequently calling the drivers' .port_vlan_add) when it isn't needed, and sometimes (not always) causing problems in the process. Case 1: mv88e6xxx_port_vlan_prepare is stubborn and only accepts VLANs on bridged ports. That is understandably so, because standalone mv88e6xxx ports are VLAN-unaware, and VTU entries are said to be a scarce resource. Otherwise said, the following fails lamentably on mv88e6xxx: ip link add br0 type bridge vlan_filtering 1 ip link set lan3 master br0 ip link add link lan10 name lan10.1 type vlan id 1 [485256.724147] mv88e6085 d0032004.mdio-mii:12: p10: hw VLAN 1 already used by port 3 in br0 RTNETLINK answers: Operation not supported This has become a worse issue since commit 9b236d2a69da ("net: dsa: Advertise the VLAN offload netdev ability only if switch supports it"). Up to that point, the driver was returning -EOPNOTSUPP and DSA was reconverting that error to 0, making the 8021q upper think all is ok (but obviously the error message was there even prior to this change). After that change the -EOPNOTSUPP is propagated to vlan_vid_add, and it is a hard error. Case 2: Ports that don't offload the Linux bridge (have a dp->bridge_dev = NULL because they don't implement .port_bridge_{join,leave}). Understandably, a standalone port should not offload VLANs either, it should remain VLAN unaware and any VLAN should be a software VLAN (as long as the hardware is not quirky, that is). In fact, dsa_slave_port_obj_add does do the right thing and rejects switchdev VLAN objects coming from the bridge when that bridge is not offloaded: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); But it seems that the bridge is able to trick us. The __vlan_vid_add from br_vlan.c has: /* Try switchdev op first. In case it is not supported, fallback to * 8021q add. */ err = br_switchdev_port_vlan_add(dev, v->vid, flags, extack); if (err == -EOPNOTSUPP) return vlan_vid_add(dev, br->vlan_proto, v->vid); So it says "no, no, you need this VLAN in your life!". And we, naive as we are, say "oh, this comes from the vlan_vid_add code path, it must be an 8021q upper, sure, I'll take that". And we end up with that bridge VLAN installed on our port anyway. But this time, it has the wrong flags: if the bridge was trying to install VLAN 1 as a pvid/untagged VLAN, failed via switchdev, retried via vlan_vid_add, we have this comment: /* This API only allows programming tagged, non-PVID VIDs */ So what we do makes absolutely no sense. Backtracing a bit, we see the common pattern. We allow the network stack to think that our standalone ports are VLAN-aware, but they aren't, for the vast majority of switches. The quirky ones should not dictate the norm. The dsa_slave_vlan_rx_add_vid and dsa_slave_vlan_rx_kill_vid methods exist for drivers that need the 'rx-vlan-filter: on' feature in ethtool -k, which can be due to any of the following reasons: 1. vlan_filtering_is_global = true, and some ports are under a VLAN-aware bridge while others are standalone, and the standalone ports would otherwise drop VLAN-tagged traffic. This is described in commit 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation"). 2. the ports that are under a VLAN-aware bridge should also set this feature, for 8021q uppers having a VID not claimed by the bridge. In this case, the driver will essentially not even know that the VID is coming from the 8021q layer and not the bridge. 3. Hellcreek. This driver needs it because in standalone mode, it uses unique VLANs per port to ensure separation. For separation of untagged traffic, it uses different PVIDs for each port, and for separation of VLAN-tagged traffic, it never accepts 8021q uppers with the same vid on two ports. If a driver does not fall under any of the above 3 categories, there is no reason why it should advertise the 'rx-vlan-filter' feature, therefore no reason why it should offload the VLANs added through vlan_vid_add. This commit fixes the problem by removing the 'rx-vlan-filter' feature from the slave devices when they operate in standalone mode, and when they offload a VLAN-unaware bridge. The way it works is that vlan_vid_add will now stop its processing here: vlan_add_rx_filter_info: if (!vlan_hw_filter_capable(dev, proto)) return 0; So the VLAN will still be saved in the interface's VLAN RX filtering list, but because it does not declare VLAN filtering in its features, the 8021q module will return zero without committing that VLAN to hardware. This gives the drivers what they want, since it keeps the 8021q VLANs away from the VLAN table until VLAN awareness is enabled (point at which the ports are no longer standalone, hence in the mv88e6xxx case, the check in mv88e6xxx_port_vlan_prepare passes). Since the issue predates the existence of the hellcreek driver, case 3 will be dealt with in a separate patch. The main change that this patch makes is to no longer set NETIF_F_HW_VLAN_CTAG_FILTER unconditionally, but toggle it dynamically (for most switches, never). The second part of the patch addresses an issue that the first part introduces: because the 'rx-vlan-filter' feature is now dynamically toggled, and our .ndo_vlan_rx_add_vid does not get called when 'rx-vlan-filter' is off, we need to avoid bugs such as the following by replaying the VLANs from 8021q uppers every time we enable VLAN filtering: ip link add link lan0 name lan0.100 type vlan id 100 ip addr add 192.168.100.1/24 dev lan0.100 ping 192.168.100.2 # should work ip link add br0 type bridge vlan_filtering 0 ip link set lan0 master br0 ping 192.168.100.2 # should still work ip link set br0 type bridge vlan_filtering 1 ping 192.168.100.2 # should still work but doesn't As reported by Florian, some drivers look at ds->vlan_filtering in their .port_vlan_add() implementation. So this patch also makes sure that ds->vlan_filtering is committed before calling the driver. This is the reason why it is first committed, then restored on the failure path. Reported-by: Tobias Waldekranz <tobias@waldekranz.com> Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24net: dsa: properly fall back to software bridgingVladimir Oltean
If the driver does not implement .port_bridge_{join,leave}, then we must fall back to standalone operation on that port, and trigger the error path of dsa_port_bridge_join. This sets dp->bridge_dev = NULL. In turn, having a non-NULL dp->bridge_dev when there is no offloading support makes the following things go wrong: - dsa_default_offload_fwd_mark make the wrong decision in setting skb->offload_fwd_mark. It should set skb->offload_fwd_mark = 0 for ports that don't offload the bridge, which should instruct the bridge to forward in software. But this does not happen, dp->bridge_dev is incorrectly set to point to the bridge, so the bridge is told that packets have been forwarded in hardware, which they haven't. - switchdev objects (MDBs, VLANs) should not be offloaded by ports that don't offload the bridge. Standalone ports should behave as packet-in, packet-out and the bridge should not be able to manipulate the pvid of the port, or tag stripping on egress, or ingress filtering. This should already work fine because dsa_slave_port_obj_add has: case SWITCHDEV_OBJ_ID_PORT_VLAN: if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev)) return -EOPNOTSUPP; err = dsa_slave_vlan_add(dev, obj, extack); but since dsa_port_offloads_bridge_port works based on dp->bridge_dev, this is again sabotaging us. All the above work in case the port has an unoffloaded LAG interface, so this is well exercised code, we should apply it for plain unoffloaded bridge ports too. Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24net: dsa: don't call switchdev_bridge_port_unoffload for unoffloaded bridge ↵Vladimir Oltean
ports For ports that have a NULL dp->bridge_dev, dsa_port_to_bridge_port() also returns NULL as expected. Issue #1 is that we are performing a NULL pointer dereference on brport_dev. Issue #2 is that these are ports on which switchdev_bridge_port_offload has not been called, so we should not call switchdev_bridge_port_unoffload on them either. Both issues are addressed by checking against a NULL brport_dev in dsa_port_pre_bridge_leave and exiting early. Fixes: 2f5dc00f7a3e ("net: bridge: switchdev: let drivers inform which bridge ports are offloaded") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24mac80211: introduce individual TWT support in AP modeLorenzo Bianconi
Introduce TWT action frames parsing support to mac80211. Currently just individual TWT agreement are support in AP mode. Whenever the AP receives a TWT action frame from an associated client, after performing sanity checks, it will notify the underlay driver with requested parameters in order to check if they are supported and if there is enough room for a new agreement. The driver is expected to set the agreement result and report it to mac80211. Drivers supporting this have two new callbacks: - add_twt_setup (mandatory) - twt_teardown_request (optional) mac80211 will send an action frame reply according to the result reported by the driver. Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/257512f2e22ba42b9f2624942a128dd8f141de4b.1629741512.git.lorenzo@kernel.org [use le16p_replace_bits(), minor cleanups, use (void *) casts, fix to use ieee80211_get_he_iftype_cap() correctly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-08-24Merge branch 'mptcp-refactor'David S. Miller
Mat Martineau says: ==================== mptcp: Refactor ADD_ADDR/RM_ADDR handling This patch set changes the way MPTCP ADD_ADDR and RM_ADDR options are handled to improve the reliability of sending and updating address advertisements. The information used to populate outgoing advertisement option headers is now stored separately to avoid rare cases where a more recent request would overwrite something that had not been sent yet. While the peers would recover from this, it's better to avoid the problem in the first place. Patch 1 moves an advertisement option check under a lock so the changes made in the next several patches will not introduce a race. Patches 2-4 make sure ADD_ADDR, ADD_ADDR echo, and RM_ADDR options use separate flags and data. Patch 5 removes some now-redundant flags. Patch 6 adds a selftest that confirms the advertisement reliability improvements. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24selftests: mptcp: add_addr and echo race testYonglong Li
This patch added an extra test for the singal_address_tests() to do the ADD_ADDR and ADD_ADDR_ECHO race test. Co-developed-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24mptcp: remove MPTCP_ADD_ADDR_IPV6 and MPTCP_ADD_ADDR_PORTYonglong Li
MPTCP_ADD_ADDR_IPV6 and MPTCP_ADD_ADDR_PORT are not necessary, we can get these info from pm.local or pm.remote. Drop mptcp_pm_should_add_signal_ipv6 and mptcp_pm_should_add_signal_port too. Co-developed-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24mptcp: build ADD_ADDR/echo-ADD_ADDR option according pm.add_signalYonglong Li
According to the MPTCP_ADD_ADDR_SIGNAL or MPTCP_ADD_ADDR_ECHO flag, build the ADD_ADDR/ADD_ADDR_ECHO option. In mptcp_pm_add_addr_signal(), use opts->addr to save the announced ADD_ADDR or ADD_ADDR_ECHO address. Co-developed-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24mptcp: fix ADD_ADDR and RM_ADDR maybe flush addr_signal each otherYonglong Li
ADD_ADDR shares pm.addr_signal with RM_ADDR, so after RM_ADDR/ADD_ADDR has done, we should not clean ADD_ADDR/RM_ADDR's addr_signal. Co-developed-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24mptcp: make MPTCP_ADD_ADDR_SIGNAL and MPTCP_ADD_ADDR_ECHO separateYonglong Li
Use MPTCP_ADD_ADDR_SIGNAL only for the action of sending ADD_ADDR, and use MPTCP_ADD_ADDR_ECHO only for the action of sending ADD_ADDR echo. Use msk->pm.local to save the announced ADD_ADDR address only, and reuse msk->pm.remote to save the announced ADD_ADDR_ECHO address. To prepare for the next patch. Co-developed-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24mptcp: move drop_other_suboptions check under pm lockYonglong Li
This patch moved the drop_other_suboptions check from mptcp_established_options_add_addr() into mptcp_pm_add_addr_signal(), do it under the PM lock to avoid the race between this check and mptcp_pm_add_addr_signal(). For this, added a new parameter for mptcp_pm_add_addr_signal() to get the drop_other_suboptions value. And drop the other suboptions after the option length check if drop_other_suboptions is true. Additionally, always drop the other suboption for TCP pure ack: that makes both the code simpler and the MPTCP behaviour more consistent. Co-developed-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24net: ipv4: Move ip_options_fragment() out of loopYajun Deng
The ip_options_fragment() only called when iter->offset is equal to zero, so move it out of loop, and inline 'Copy the flags to each fragment.' As also, remove the unused parameter in ip_frag_ipcb(). Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24qed: Fix the VF msix vectors flowShai Malin
For VFs we should return with an error in case we didn't get the exact number of msix vectors as we requested. Not doing that will lead to a crash when starting queues for this VF. Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24cxgb4: improve printing NIC informationHeiner Kallweit
Currently the interface name and PCI address are printed twice, because netdev_info() is printing this information implicitly already. This results in messages like the following. remove the duplicated information. cxgb4 0000:81:00.4 eth3: eth3: Chelsio T6225-OCP-SO (0000:81:00.4) 1G/10G/25GBASE-SFP28 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24ieee80211: add TWT element definitionsLorenzo Bianconi
Introduce TWT definitions and TWT Information element structure in ieee80211.h Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/71d8b581fe4b5abc5b92f8d77ac2de3e2f7591b6.1629741512.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-08-23selftests/bpf: Reduce flakyness in timer_mimYucong Sun
This patch extends wait time in timer_mim. As observed in slow CI environment, it is possible to have interrupt/preemption long enough to cause the test to fail, almost 1 failure in 5 runs. Signed-off-by: Yucong Sun <fallentree@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210823213629.3519641-1-fallentree@fb.com
2021-08-23Merge branch 'Refactor cgroup_bpf internals to use more specific attach_type'Alexei Starovoitov
Dave Marchevsky says: ==================== The cgroup_bpf struct has a few arrays (effective, progs, and flags) of size MAX_BPF_ATTACH_TYPE. These are meant to separate progs by their attach type, currently represented by the bpf_attach_type enum. There are some bpf_attach_type values which are not valid attach types for cgroup bpf programs. Programs with these attach types will never be handled by cgroup_bpf_{attach,detach} and thus will never be held in cgroup_bpf structs. Even if such programs did make it into their reserved slot in those arrays, they would never be executed. Accordingly we can migrate to a new internal cgroup_bpf-specific enum for these arrays, saving some bytes per cgroup and making it more obvious which BPF programs belong there. netns_bpf_attach_type is an existing example of this pattern, let's do similar for cgroup_bpf. v1->v2: Address Daniel's comments * Reverse xmas tree ordering for def changes * Helper macro to reduce to_cgroup_bpf_attach_type boilerplate * checkpatch.pl complains: "ERROR: Macros with complex values should be enclosed in parentheses". Found some existing macros (do 'git grep "define case"') which get same complaint. Think it's fine to keep as-is since it's immediately undef'd. * Remove CG_BPF_ prefix from cgroup_bpf_attach_type * Although I agree that the prefix is redundant, the de-prefixed names feel a bit too 'general' given the internal use of the enum. e.g. when someone sees CGROUP_INET6_BIND it's not obvious that it should only be used in certain ways internally. * Don't feel strongly about this, just my thoughts as a noob to the internals. * Rebase onto latest bpf-next/master * No significant conflicts, some small boilerplate adjustments needed to catch up to Andrii's "bpf: Refactor BPF_PROG_RUN_ARRAY family of macros into functions" change ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-08-23bpf: Migrate cgroup_bpf to internal cgroup_bpf_attach_type enumDave Marchevsky
Add an enum (cgroup_bpf_attach_type) containing only valid cgroup_bpf attach types and a function to map bpf_attach_type values to the new enum. Inspired by netns_bpf_attach_type. Then, migrate cgroup_bpf to use cgroup_bpf_attach_type wherever possible. Functionality is unchanged as attach_type_to_prog_type switches in bpf/syscall.c were preventing non-cgroup programs from making use of the invalid cgroup_bpf array slots. As a result struct cgroup_bpf uses 504 fewer bytes relative to when its arrays were sized using MAX_BPF_ATTACH_TYPE. bpf_cgroup_storage is notably not migrated as struct bpf_cgroup_storage_key is part of uapi and contains a bpf_attach_type member which is not meant to be opaque. Similarly, bpf_cgroup_link continues to report its bpf_attach_type member to userspace via fdinfo and bpf_link_info. To ease disambiguation, bpf_attach_type variables are renamed from 'type' to 'atype' when changed to cgroup_bpf_attach_type. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210819092420.1984861-2-davemarchevsky@fb.com
2021-08-23ucounts: Increase ucounts reference counter before the security hookAlexey Gladkov
We need to increment the ucounts reference counter befor security_prepare_creds() because this function may fail and abort_creds() will try to decrement this reference. [ 96.465056][ T8641] FAULT_INJECTION: forcing a failure. [ 96.465056][ T8641] name fail_page_alloc, interval 1, probability 0, space 0, times 0 [ 96.478453][ T8641] CPU: 1 PID: 8641 Comm: syz-executor668 Not tainted 5.14.0-rc6-syzkaller #0 [ 96.487215][ T8641] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ 96.497254][ T8641] Call Trace: [ 96.500517][ T8641] dump_stack_lvl+0x1d3/0x29f [ 96.505758][ T8641] ? show_regs_print_info+0x12/0x12 [ 96.510944][ T8641] ? log_buf_vmcoreinfo_setup+0x498/0x498 [ 96.516652][ T8641] should_fail+0x384/0x4b0 [ 96.521141][ T8641] prepare_alloc_pages+0x1d1/0x5a0 [ 96.526236][ T8641] __alloc_pages+0x14d/0x5f0 [ 96.530808][ T8641] ? __rmqueue_pcplist+0x2030/0x2030 [ 96.536073][ T8641] ? lockdep_hardirqs_on_prepare+0x3e2/0x750 [ 96.542056][ T8641] ? alloc_pages+0x3f3/0x500 [ 96.546635][ T8641] allocate_slab+0xf1/0x540 [ 96.551120][ T8641] ___slab_alloc+0x1cf/0x350 [ 96.555689][ T8641] ? kzalloc+0x1d/0x30 [ 96.559740][ T8641] __kmalloc+0x2e7/0x390 [ 96.563980][ T8641] ? kzalloc+0x1d/0x30 [ 96.568029][ T8641] kzalloc+0x1d/0x30 [ 96.571903][ T8641] security_prepare_creds+0x46/0x220 [ 96.577174][ T8641] prepare_creds+0x411/0x640 [ 96.581747][ T8641] __sys_setfsuid+0xe2/0x3a0 [ 96.586333][ T8641] do_syscall_64+0x3d/0xb0 [ 96.590739][ T8641] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 96.596611][ T8641] RIP: 0033:0x445a69 [ 96.600483][ T8641] Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 11 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 [ 96.620152][ T8641] RSP: 002b:00007f1054173318 EFLAGS: 00000246 ORIG_RAX: 000000000000007a [ 96.628543][ T8641] RAX: ffffffffffffffda RBX: 00000000004ca4c8 RCX: 0000000000445a69 [ 96.636600][ T8641] RDX: 0000000000000010 RSI: 00007f10541732f0 RDI: 0000000000000000 [ 96.644550][ T8641] RBP: 00000000004ca4c0 R08: 0000000000000001 R09: 0000000000000000 [ 96.652500][ T8641] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004ca4cc [ 96.660631][ T8641] R13: 00007fffffe0b62f R14: 00007f1054173400 R15: 0000000000022000 Fixes: 905ae01c4ae2 ("Add a reference to ucounts for each cred") Reported-by: syzbot+01985d7909f9468f013c@syzkaller.appspotmail.com Signed-off-by: Alexey Gladkov <legion@kernel.org> Link: https://lkml.kernel.org/r/97433b1742c3331f02ad92de5a4f07d673c90613.1629735352.git.legion@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2021-08-23ucounts: Fix regression preventing increasing of rlimits in init_user_nsEric W. Biederman
"Ma, XinjianX" <xinjianx.ma@intel.com> reported: > When lkp team run kernel selftests, we found after these series of patches, testcase mqueue: mq_perf_tests > in kselftest failed with following message. > > # selftests: mqueue: mq_perf_tests > # > # Initial system state: > # Using queue path: /mq_perf_tests > # RLIMIT_MSGQUEUE(soft): 819200 > # RLIMIT_MSGQUEUE(hard): 819200 > # Maximum Message Size: 8192 > # Maximum Queue Size: 10 > # Nice value: 0 > # > # Adjusted system state for testing: > # RLIMIT_MSGQUEUE(soft): (unlimited) > # RLIMIT_MSGQUEUE(hard): (unlimited) > # Maximum Message Size: 16777216 > # Maximum Queue Size: 65530 > # Nice value: -20 > # Continuous mode: (disabled) > # CPUs to pin: 3 > # ./mq_perf_tests: mq_open() at 296: Too many open files > not ok 2 selftests: mqueue: mq_perf_tests # exit=1 > ``` > > Test env: > rootfs: debian-10 > gcc version: 9 After investigation the problem turned out to be that ucount_max for the rlimits in init_user_ns was being set to the initial rlimit value. The practical problem is that ucount_max provides a limit that applications inside the user namespace can not exceed. Which means in practice that rlimits that have been converted to use the ucount infrastructure were not able to exceend their initial rlimits. Solve this by setting the relevant values of ucount_max to RLIM_INIFINITY. A limit in init_user_ns is pointless so the code should allow the values to grow as large as possible without riscking an underflow or an overflow. As the ltp test case was a bit of a pain I have reproduced the rlimit failure and tested the fix with the following little C program: > #include <stdio.h> > #include <fcntl.h> > #include <sys/stat.h> > #include <mqueue.h> > #include <sys/time.h> > #include <sys/resource.h> > #include <errno.h> > #include <string.h> > #include <stdlib.h> > #include <limits.h> > #include <unistd.h> > > int main(int argc, char **argv) > { > struct mq_attr mq_attr; > struct rlimit rlim; > mqd_t mqd; > int ret; > > ret = getrlimit(RLIMIT_MSGQUEUE, &rlim); > if (ret != 0) { > fprintf(stderr, "getrlimit(RLIMIT_MSGQUEUE) failed: %s\n", strerror(errno)); > exit(EXIT_FAILURE); > } > printf("RLIMIT_MSGQUEUE %lu %lu\n", > rlim.rlim_cur, rlim.rlim_max); > rlim.rlim_cur = RLIM_INFINITY; > rlim.rlim_max = RLIM_INFINITY; > ret = setrlimit(RLIMIT_MSGQUEUE, &rlim); > if (ret != 0) { > fprintf(stderr, "setrlimit(RLIMIT_MSGQUEUE, RLIM_INFINITY) failed: %s\n", strerror(errno)); > exit(EXIT_FAILURE); > } > > memset(&mq_attr, 0, sizeof(struct mq_attr)); > mq_attr.mq_maxmsg = 65536 - 1; > mq_attr.mq_msgsize = 16*1024*1024 - 1; > > mqd = mq_open("/mq_rlimit_test", O_RDONLY|O_CREAT, 0600, &mq_attr); > if (mqd == (mqd_t)-1) { > fprintf(stderr, "mq_open failed: %s\n", strerror(errno)); > exit(EXIT_FAILURE); > } > ret = mq_close(mqd); > if (ret) { > fprintf(stderr, "mq_close failed; %s\n", strerror(errno)); > exit(EXIT_FAILURE); > } > > return EXIT_SUCCESS; > } Fixes: 6e52a9f0532f ("Reimplement RLIMIT_MSGQUEUE on top of ucounts") Fixes: d7c9e99aee48 ("Reimplement RLIMIT_MEMLOCK on top of ucounts") Fixes: d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of ucounts") Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts") Reported-by: kernel test robot lkp@intel.com Acked-by: Alexey Gladkov <legion@kernel.org> Link: https://lkml.kernel.org/r/87eeajswfc.fsf_-_@disp2133 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-08-23bpf: Fix ringbuf helper function compatibilityDaniel Borkmann
Commit 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it") extended check_map_func_compatibility() by enforcing map -> helper function match, but not helper -> map type match. Due to this all of the bpf_ringbuf_*() helper functions could be used with a wrong map type such as array or hash map, leading to invalid access due to type confusion. Also, both BPF_FUNC_ringbuf_{submit,discard} have ARG_PTR_TO_ALLOC_MEM as argument and not a BPF map. Therefore, their check_map_func_compatibility() presence is incorrect since it's only for map type checking. Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it") Reported-by: Ryota Shiga (Flatt Security) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-08-23Revert "media: dvb header files: move some headers to staging"Linus Torvalds
This reverts commit 819fbd3d8ef36c09576c2a0ffea503f5c46e9177. It turns out that some user-space applications use these uapi header files, so even though the only user of the interface is an old driver that was moved to staging, moving the header files causes unnecessary pain. Generally, we really don't want user space to use kernel headers directly (exactly because it causes pain when we re-organize), and instead copy them as needed. But these things happen, and the headers were in the uapi directory, so I guess it's not entirely unreasonable. Link: https://lore.kernel.org/lkml/4e3e0d40-df4a-94f8-7c2d-85010b0873c4@web.de/ Reported-by: Soeren Moch <smoch@web.de> Cc: stable@kernel.org # 5.13 Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-08-23af_unix: Fix NULL pointer bug in unix_shutdownJiang Wang
Commit 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap") introduced a bug for af_unix SEQPACKET type. In unix_shutdown, the unhash function will call prot->unhash(), which is NULL for SEQPACKET. And kernel will panic. On ARM32, it will show following messages: (it likely affects x86 too). Fix the bug by checking the prot->unhash is NULL or not first. Kernel log: <--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = 2fba1ffb *pgd=00000000 Internal error: Oops: 80000005 [#1] PREEMPT SMP THUMB2 Modules linked in: CPU: 1 PID: 1999 Comm: falkon Tainted: G W 5.14.0-rc5-01175-g94531cfcbe79-dirty #9240 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) PC is at 0x0 LR is at unix_shutdown+0x81/0x1a8 pc : [<00000000>] lr : [<c08f3311>] psr: 600f0013 sp : e45aff70 ip : e463a3c0 fp : beb54f04 r10: 00000125 r9 : e45ae000 r8 : c4a56664 r7 : 00000001 r6 : c4a56464 r5 : 00000001 r4 : c4a56400 r3 : 00000000 r2 : c5a6b180 r1 : 00000000 r0 : c4a56400 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 50c5387d Table: 05aa804a DAC: 00000051 Register r0 information: slab PING start c4a56400 pointer offset 0 Register r1 information: NULL pointer Register r2 information: slab task_struct start c5a6b180 pointer offset 0 Register r3 information: NULL pointer Register r4 information: slab PING start c4a56400 pointer offset 0 Register r5 information: non-paged memory Register r6 information: slab PING start c4a56400 pointer offset 100 Register r7 information: non-paged memory Register r8 information: slab PING start c4a56400 pointer offset 612 Register r9 information: non-slab/vmalloc memory Register r10 information: non-paged memory Register r11 information: non-paged memory Register r12 information: slab filp start e463a3c0 pointer offset 0 Process falkon (pid: 1999, stack limit = 0x9ec48895) Stack: (0xe45aff70 to 0xe45b0000) ff60: e45ae000 c5f26a00 00000000 00000125 ff80: c0100264 c07f7fa3 beb54f04 fffffff7 00000001 e6f3fc0e b5e5e9ec beb54ec4 ffa0: b5da0ccc c010024b b5e5e9ec beb54ec4 0000000f 00000000 00000000 beb54ebc ffc0: b5e5e9ec beb54ec4 b5da0ccc 00000125 beb54f58 00785238 beb5529c beb54f04 ffe0: b5da1e24 beb54eac b301385c b62b6ee8 600f0030 0000000f 00000000 00000000 [<c08f3311>] (unix_shutdown) from [<c07f7fa3>] (__sys_shutdown+0x2f/0x50) [<c07f7fa3>] (__sys_shutdown) from [<c010024b>] (__sys_trace_return+0x1/0x16) Exception stack(0xe45affa8 to 0xe45afff0) Fixes: 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap") Reported-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Jiang Wang <jiang.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Link: https://lore.kernel.org/bpf/20210821180738.1151155-1-jiang.wang@bytedance.com
2021-08-23via-velocity: Use of_device_get_match_data to simplify codeTang Bin
Retrieve OF match data, it's better and cleaner to use 'of_device_get_match_data' over 'of_match_device'. Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23via-rhine: Use of_device_get_match_data to simplify codeTang Bin
Retrieve OF match data, it's better and cleaner to use 'of_device_get_match_data' over 'of_match_device'. Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23Merge branch 'asix-fixes'David S. Miller
Oleksij Rempel says: ==================== asix fixes changes v2: - rebase against current net - add one more fix for the ax88178 variant ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23net: usb: asix: do not call phy_disconnect() for ax88178Oleksij Rempel
Fix crash on reboot on a system with ASIX AX88178 USB adapter attached to it: | asix 1-1.4:1.0 eth0: unregister 'asix' usb-ci_hdrc.0-1.4, ASIX AX88178 USB 2.0 Ethernet | 8<--- cut here --- | Unable to handle kernel NULL pointer dereference at virtual address 0000028c | pgd = 5ec93aee | [0000028c] *pgd=00000000 | Internal error: Oops: 5 [#1] PREEMPT SMP ARM | Modules linked in: | CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.14.0-rc1-20210811-1 #4 | Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) | PC is at phy_disconnect+0x8/0x48 | LR is at ax88772_unbind+0x14/0x20 | [<80650d04>] (phy_disconnect) from [<80741aa4>] (ax88772_unbind+0x14/0x20) | [<80741aa4>] (ax88772_unbind) from [<8074e250>] (usbnet_disconnect+0x48/0xd8) | [<8074e250>] (usbnet_disconnect) from [<807655e0>] (usb_unbind_interface+0x78/0x25c) | [<807655e0>] (usb_unbind_interface) from [<805b03a0>] (__device_release_driver+0x154/0x20c) | [<805b03a0>] (__device_release_driver) from [<805b0478>] (device_release_driver+0x20/0x2c) | [<805b0478>] (device_release_driver) from [<805af944>] (bus_remove_device+0xcc/0xf8) | [<805af944>] (bus_remove_device) from [<805ab26c>] (device_del+0x178/0x4b0) | [<805ab26c>] (device_del) from [<807634a4>] (usb_disable_device+0xcc/0x178) | [<807634a4>] (usb_disable_device) from [<8075a060>] (usb_disconnect+0xd8/0x238) | [<8075a060>] (usb_disconnect) from [<8075a02c>] (usb_disconnect+0xa4/0x238) | [<8075a02c>] (usb_disconnect) from [<8075a02c>] (usb_disconnect+0xa4/0x238) | [<8075a02c>] (usb_disconnect) from [<80af3520>] (usb_remove_hcd+0xa0/0x198) | [<80af3520>] (usb_remove_hcd) from [<807902e0>] (host_stop+0x38/0xa8) | [<807902e0>] (host_stop) from [<8078d9e4>] (ci_hdrc_remove+0x3c/0x118) | [<8078d9e4>] (ci_hdrc_remove) from [<805b27ec>] (platform_remove+0x20/0x50) | [<805b27ec>] (platform_remove) from [<805b03a0>] (__device_release_driver+0x154/0x20c) | [<805b03a0>] (__device_release_driver) from [<805b0478>] (device_release_driver+0x20/0x2c) | [<805b0478>] (device_release_driver) from [<805af944>] (bus_remove_device+0xcc/0xf8) | [<805af944>] (bus_remove_device) from [<805ab26c>] (device_del+0x178/0x4b0) For this adapter we call ax88178_bind() and ax88772_unbind(), which is related to different chip version and different counter part *bind() function. Since this chip is currently not ported to the PHYLIB, we do not need to call phy_disconnect() here. So, to fix this crash, we need to add ax88178_unbind(). Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Reported-by: Robin van der Gracht <robin@protonic.nl> Tested-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23net: usb: asix: ax88772: move embedded PHY detection as early as possibleOleksij Rempel
Some HW revisions need additional MAC configuration before the embedded PHY can be enabled. If this is not done, we won't be able to get response from the internal PHY. This issue was detected on chipcode == AX_AX88772_CHIPCODE variant, where ax88772_hw_reset() was executed with missing embd_phy flag. Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23hinic: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23qlcnic: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23net/mellanox: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23net: 8139cp: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23vmxnet3: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. The explicit 'err = -EIO;' has been removed because 'dma_set_mask_and_coherent()' returns 0 or -EIO, so its return code can be used directly. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-29 03:03:59 +0000