| Age | Commit message (Collapse) | Author |
|---|
|
ASUS B23E requires the same workaround like other machines with
VT1802, otherwise it looses the codec power on a few nodes and the
sound kept silence.
Fixes: a0645daf1610 ("ALSA: HDA: Early Forbid of runtime PM")
Link: https://lore.kernel.org/r/ac2232f142efcd67fe6ac38897f704f7176bd200.camel@gmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210817052432.14751-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
During system shutdown codecs may be still active, and resetting the
controller->codec HW link in this state - based on the bug reporter's
tests - leads to the shutdown sequence to get stuck. This happens at
least on the reporter's KBL system with an ALC662 codec.
For now fix the issue by skipping the link reset step.
Fixes: 472e18f63c42 ("ALSA: hda: Release controller display power during shutdown/reboot")
References: https://bugzilla.kernel.org/show_bug.cgi?id=214045
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3618#note_1024665
Reported-and-tested-by: youling257@gmail.com
Cc: youling257@gmail.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20210816174259.2759103-1-imre.deak@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Using a fixed delay of 1 microsecond has proven flaky in slow CPU environment,
e.g. Github Actions CI system. This patch adds exponential backoff with a cap
of 50ms to reduce the flakiness of the test. Initial delay is chosen at random
in the range [0ms, 5ms).
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210816175250.296110-1-fallentree@fb.com
|
|
Jiang Wang says:
====================
This patch series add support for unix stream type
for sockmap. Sockmap already supports TCP, UDP,
unix dgram types. The unix stream support is similar
to unix dgram.
Also add selftests for unix stream type in sockmap tests.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Add two new test cases in sockmap tests, where unix stream is
redirected to tcp and vice versa.
Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210816190327.2739291-6-jiang.wang@bytedance.com
|
|
This is to prepare for adding new unix stream tests.
Mostly renames, also pass the socket types as an argument.
Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210816190327.2739291-5-jiang.wang@bytedance.com
|
|
Add two tests for unix stream to unix stream redirection
in sockmap tests.
Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210816190327.2739291-4-jiang.wang@bytedance.com
|
|
Previously, sockmap for AF_UNIX protocol only supports
dgram type. This patch add unix stream type support, which
is similar to unix_dgram_proto. To support sockmap, dgram
and stream cannot share the same unix_proto anymore, because
they have different implementations, such as unhash for stream
type (which will remove closed or disconnected sockets from the map),
so rename unix_proto to unix_dgram_proto and add a new
unix_stream_proto.
Also implement stream related sockmap functions.
And add dgram key words to those dgram specific functions.
Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210816190327.2739291-3-jiang.wang@bytedance.com
|
|
To support sockmap for af_unix stream type, implement
read_sock, which is similar to the read_sock for unix
dgram sockets.
Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210816190327.2739291-2-jiang.wang@bytedance.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This contains a fix for a potential boot failure due to a missing
Kconfig dependency for people upgrading with the DRBG enabled"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: drbg - select SHA512
|
|
Add test for btf__load_vmlinux_btf/btf__load_module_btf APIs. The test
loads bpf_testmod module BTF and check existence of a symbol which is
known to exist.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210815081035.205879-1-hengqi.chen@gmail.com
|
|
Since the original TFO server code was implemented in commit
168a8f58059a22feb9e9a2dcc1b8053dbbbc12ef ("tcp: TCP Fast Open Server -
main code path") the TFO server code has supported the sysctl bit flag
TFO_SERVER_COOKIE_NOT_REQD. Currently, when the TFO_SERVER_ENABLE and
TFO_SERVER_COOKIE_NOT_REQD sysctl bit flags are set, a server connection
will accept a SYN with N bytes of data (N > 0) that has no TFO cookie,
create a new fast open connection, process the incoming data in the SYN,
and make the connection ready for accepting. After accepting, the
connection is ready for read()/recvmsg() to read the N bytes of data in
the SYN, ready for write()/sendmsg() calls and data transmissions to
transmit data.
This commit changes an edge case in this feature by changing this
behavior to apply to (N >= 0) bytes of data in the SYN rather than only
(N > 0) bytes of data in the SYN. Now, a server will accept a data-less
SYN without a TFO cookie if TFO_SERVER_COOKIE_NOT_REQD is set.
Caveat! While this enables a new kind of TFO (data-less empty-cookie
SYN), some firewall rules setup may not work if they assume such packets
are not legit TFOs and will filter them.
Signed-off-by: Luke Hsiao <lukehsiao@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210816205105.2533289-1-luke.w.hsiao@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This removes the libbpf_api.rst file from the kernel documentation.
The intention for this file was to pull documentation from comments
above API functions in libbpf. However, due to limitations of the
kernel documentation system, this API documentation could not be
versioned, which is counterintuative to how users expect to use it.
There is also currently no doc comments, making this a blank page.
Once the kernel comment documentation is actually contributed, it
will still exist in the kernel repository, just in the code itself.
A seperate site is being spun up to generate documentaiton from those
comments in a way in which it can be versioned properly.
This also reconfigures the bpf documentation index page to make it
easier to sync to the previously mentioned documentaiton site.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210810020508.280639-1-grantseltzer@gmail.com
|
|
Jonathan Lemon says:
====================
ptp: ocp: minor updates and fixes.
Fix errors spotted by automated tools.
Add myself to the MAINTAINERS for the ptp_ocp driver.
====================
Link: https://lore.kernel.org/r/20210816221337.390645-1-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add maintainer info for the OpenCompute PTP driver.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NET doesn't imply NET_DEVLINK. Select this separately, so that
random config combinations don't complain.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If ptp_ocp_device_init() fails, pci_disable_device() is skipped.
Fix the error handling so this case is covered. Update ptp_ocp_remove()
so the normal exit path is identical.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If attempting to flash the firmware with a blob of size 0,
the entire write loop is skipped and the uninitialized err
is returned. Fix by setting to 0 first.
Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To fix the "reverse-NAT" for replies.
When a packet is sent over a VRF, the POST_ROUTING hooks are called
twice: Once from the VRF interface, and once from the "actual"
interface the packet will be sent from:
1) First SNAT: l3mdev_l3_out() -> vrf_l3_out() -> .. -> vrf_output_direct()
This causes the POST_ROUTING hooks to run.
2) Second SNAT: 'ip_output()' calls POST_ROUTING hooks again.
Similarly for replies, first ip_rcv() calls PRE_ROUTING hooks, and
second vrf_l3_rcv() calls them again.
As an example, consider the following SNAT rule:
> iptables -t nat -A POSTROUTING -p udp -m udp --dport 53 -j SNAT --to-source 2.2.2.2 -o vrf_1
In this case sending over a VRF will create 2 conntrack entries.
The first is from the VRF interface, which performs the IP SNAT.
The second will run the SNAT, but since the "expected reply" will remain
the same, conntrack randomizes the source port of the packet:
e..g With a socket bound to 1.1.1.1:10000, sending to 3.3.3.3:53, the conntrack
rules are:
udp 17 29 src=2.2.2.2 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 [UNREPLIED] src=3.3.3.3 dst=2.2.2.2 sport=53 dport=61033 packets=0 bytes=0 mark=0 use=1
udp 17 29 src=1.1.1.1 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 [UNREPLIED] src=3.3.3.3 dst=2.2.2.2 sport=53 dport=10000 packets=0 bytes=0 mark=0 use=1
i.e. First SNAT IP from 1.1.1.1 --> 2.2.2.2, and second the src port is
SNAT-ed from 10000 --> 61033.
But when a reply is sent (3.3.3.3:53 -> 2.2.2.2:61033) only the later
conntrack entry is matched:
udp 17 29 src=2.2.2.2 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 src=3.3.3.3 dst=2.2.2.2 sport=53 dport=61033 packets=1 bytes=49 mark=0 use=1
udp 17 28 src=1.1.1.1 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 [UNREPLIED] src=3.3.3.3 dst=2.2.2.2 sport=53 dport=10000 packets=0 bytes=0 mark=0 use=1
And a "port 61033 unreachable" ICMP packet is sent back.
The issue is that when PRE_ROUTING hooks are called from vrf_l3_rcv(),
the skb already has a conntrack flow attached to it, which means
nf_conntrack_in() will not resolve the flow again.
This means only the dest port is "reverse-NATed" (61033 -> 10000) but
the dest IP remains 2.2.2.2, and since the socket is bound to 1.1.1.1 it's
not received.
This can be verified by logging the 4-tuple of the packet in '__udp4_lib_rcv()'.
The fix is then to reset the flow when skb is received on a VRF, to let
conntrack resolve the flow again (which now will hit the earlier flow).
To reproduce: (Without the fix "Got pkt_to_nat_port" will not be printed by
running 'bash ./repro'):
$ cat run_in_A1.py
import logging
logging.getLogger("scapy.runtime").setLevel(logging.ERROR)
from scapy.all import *
import argparse
def get_packet_to_send(udp_dst_port, msg_name):
return Ether(src='11:22:33:44:55:66', dst=iface_mac)/ \
IP(src='3.3.3.3', dst='2.2.2.2')/ \
UDP(sport=53, dport=udp_dst_port)/ \
Raw(f'{msg_name}\x0012345678901234567890')
parser = argparse.ArgumentParser()
parser.add_argument('-iface_mac', dest="iface_mac", type=str, required=True,
help="From run_in_A3.py")
parser.add_argument('-socket_port', dest="socket_port", type=str,
required=True, help="From run_in_A3.py")
parser.add_argument('-v1_mac', dest="v1_mac", type=str, required=True,
help="From script")
args, _ = parser.parse_known_args()
iface_mac = args.iface_mac
socket_port = int(args.socket_port)
v1_mac = args.v1_mac
print(f'Source port before NAT: {socket_port}')
while True:
pkts = sniff(iface='_v0', store=True, count=1, timeout=10)
if 0 == len(pkts):
print('Something failed, rerun the script :(', flush=True)
break
pkt = pkts[0]
if not pkt.haslayer('UDP'):
continue
pkt_sport = pkt.getlayer('UDP').sport
print(f'Source port after NAT: {pkt_sport}', flush=True)
pkt_to_send = get_packet_to_send(pkt_sport, 'pkt_to_nat_port')
sendp(pkt_to_send, '_v0', verbose=False) # Will not be received
pkt_to_send = get_packet_to_send(socket_port, 'pkt_to_socket_port')
sendp(pkt_to_send, '_v0', verbose=False)
break
$ cat run_in_A2.py
import socket
import netifaces
print(f"{netifaces.ifaddresses('e00000')[netifaces.AF_LINK][0]['addr']}",
flush=True)
s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
s.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE,
str('vrf_1' + '\0').encode('utf-8'))
s.connect(('3.3.3.3', 53))
print(f'{s. getsockname()[1]}', flush=True)
s.settimeout(5)
while True:
try:
# Periodically send in order to keep the conntrack entry alive.
s.send(b'a'*40)
resp = s.recvfrom(1024)
msg_name = resp[0].decode('utf-8').split('\0')[0]
print(f"Got {msg_name}", flush=True)
except Exception as e:
pass
$ cat repro.sh
ip netns del A1 2> /dev/null
ip netns del A2 2> /dev/null
ip netns add A1
ip netns add A2
ip -n A1 link add _v0 type veth peer name _v1 netns A2
ip -n A1 link set _v0 up
ip -n A2 link add e00000 type bond
ip -n A2 link add lo0 type dummy
ip -n A2 link add vrf_1 type vrf table 10001
ip -n A2 link set vrf_1 up
ip -n A2 link set e00000 master vrf_1
ip -n A2 addr add 1.1.1.1/24 dev e00000
ip -n A2 link set e00000 up
ip -n A2 link set _v1 master e00000
ip -n A2 link set _v1 up
ip -n A2 link set lo0 up
ip -n A2 addr add 2.2.2.2/32 dev lo0
ip -n A2 neigh add 1.1.1.10 lladdr 77:77:77:77:77:77 dev e00000
ip -n A2 route add 3.3.3.3/32 via 1.1.1.10 dev e00000 table 10001
ip netns exec A2 iptables -t nat -A POSTROUTING -p udp -m udp --dport 53 -j \
SNAT --to-source 2.2.2.2 -o vrf_1
sleep 5
ip netns exec A2 python3 run_in_A2.py > x &
XPID=$!
sleep 5
IFACE_MAC=`sed -n 1p x`
SOCKET_PORT=`sed -n 2p x`
V1_MAC=`ip -n A2 link show _v1 | sed -n 2p | awk '{print $2'}`
ip netns exec A1 python3 run_in_A1.py -iface_mac ${IFACE_MAC} -socket_port \
${SOCKET_PORT} -v1_mac ${SOCKET_PORT}
sleep 5
kill -9 $XPID
wait $XPID 2> /dev/null
ip netns del A1
ip netns del A2
tail x -n 2
rm x
set +x
Fixes: 73e20b761acf ("net: vrf: Add support for PREROUTING rules on vrf device")
Signed-off-by: Lahav Schlesinger <lschlesinger@drivenets.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210815120002.2787653-1-lschlesinger@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow adding bond net devices to mlx5 bridge with following changes:
- Modify bridge representor code to obtain uplink represetor that belongs
to eswitch that is registered for notification. Require representor to be
in shared FDB mode. If representor is the lag master, then consider its
port as local, otherwise treat it as peer.
- Use devcom to match on paired eswitch metadata in peer FDB entries. This
is necessary for shared FDB LAG to function since packets are always
received on active eswitch instance as opposed to parent eswitch of port.
- Support for deleting peer flows when receiving
SWITCHDEV_FDB_DEL_TO_BRIDGE notification was implemented in one of previous
patches in series. Now also implement support for handling
SWITCHDEV_FDB_ADD_TO_BRIDGE which can be generated on peer by bridge update
workqueue task in LAG configuration. Refresh the flow 'lastuse' timestamp
to current jiffies when receiving such notification on eswitch that manages
the local FDB entry. This allows peer entries to prevent ageing of the FDB.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Allow connectivity between representors of different eswitch instances that
are attached to same bridge when merged_eswitch capability is enabled. Add
ports of peer eswitch to bridge instance and mark them with
MLX5_ESW_BRIDGE_PORT_FLAG_PEER. Mark FDBs offloaded on peer ports with
MLX5_ESW_BRIDGE_FLAG_PEER flag. Such FDBs can only be aged out on their
local eswitch instance, which then sends SWITCHDEV_FDB_DEL_TO_BRIDGE event.
Listen to the event on mlx5 bridge implementation and delete peer FDBs in
event handler.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
SWITCHDEV_FDB_DEL_TO_BRIDGE notification is generated in multiple places in
bridge code. Following patch in series changes the condition for the
notification. Extract the notification into dedicated helper function
mlx5_esw_bridge_fdb_del_notify() to only modify it in single place in the
future changes.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Following patches in series allow traffic between vports of different
eswitch instances, which requires addressing bridge port by
vport_num+esw_owner_vhca_id pair since vport_num is only unique
per-eswitch. As a preparation, extend struct mlx5_esw_bridge_port with
'esw_owner_vhca_id' field and use it as part of key for
mlx5_esw_bridge->vports xarray.
With this change we can't rely on switchdev_handle_port_obj_add() helper to
get mlx5 representor from stacked device because we need specifically
representor from parent eswitch that registered the callback to obtain
correct esw_owner_vhca_id. The helper doesn't allow passing additional
parameters to predicate function and doesn't provide access to the notifier
block to obtain eswitch through br_offloads. Implement custom helpers to
obtain mlx5 representor and use them in
mlx5_esw_bridge_port_obj_{add|del|attr_set}() implementations.
Remove direct pointer to parent bridge from struct mlx5_vport as it is no
longer needed.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Following patches in series will pass bond device to bridge, which means
the code can't assume the device is mlx5 representor. Moreover, the core
device can be easily obtained from eswitch instance, so there is no reason
for more complex code that obtains struct mlx5_priv from net_device in
order to use its mdev. Refactor the code to use esw->dev instead of
priv->mdev.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Refactor mlx5_esw_bridge_vport_link() to release the bridge instance if
mlx5_esw_bridge_vport_init() returned an error instead of relying on it to
release the bridge. This improves the design because object instance is
taken and released in same layer and simplifies following patches that add
more logic to mlx5_esw_bridge_vport_link().
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add support for MQPRIO channel mode, in which a partition to TCs
is defined over the channels. We allow partitions with contiguous
queue indices, with no holes within. We do not allow modification
to the num of channels while this MQPRIO mode is active.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add handling for failures in netdev_set_num_tc().
Let mlx5e_netdev_set_tcs return an int.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This is in preparation for supporting MQPRIO CHANNEL mode in
downstream patch, in addition to DCB mode that's supported today.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Abstract the MQPRIO params into a struct.
Use a getter for DCB mode num_tcs.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Extend the existing flow classification support, to steer
flows not only directly to a receive ring, but also into
the new RSS contexts.
Create needed TIR objects on demand, and hold reference
on the RSS context.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add support to multiple RSS contexts. Resources of the non-default
RSS contexts are allocated and created on demand. Each RSS context
can be controlled and configured separately, via the implemented
ethtool ops. Here we limit the num of total contexts to 16.
We do not enforce any kind of new limitation over the indirection table
content. More specifically, two separate contexts can be configured to
fully or partially point to the same set of receive rings.
The default RSS context (index 0) is created with its full set of TIRs.
All other contexts are created with an empty set, then TIRs are added
upon first usage when steering rules are added.
We use a reference counting mechanism to make sure an RSS context is
not removed before the rules pointing to it.
Block ethtool set_channels operations when multiple RSS contexts exist,
as currently the kernel doesn't protect against inconsistent channels
configs that break non-default RSS contexts.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Move from static to dynamic memory allocations for TIR.
This is in preparation to supporting on-demand TIR operations in
downstream patches, where every RSS context will be init with an
empty set of TIRs.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Code related to RSS is now encapsulated into a dedicated object and put
into new files en/rss.{c,h}. All usages are converted.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Bring all fields that define and maintain RSS behavior together
into a new structure.
Align all usages with this new structure. Keep it hidden within
rx_res.c.
This helps supporting multiple RSS contexts in downstream patch.
Use dynamic allocations for the RSS context.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Take TIR control operations in rx_res into functions.
This is in preparation to supporting on-demand TIR operations in
downstream patches.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
All calls to mlx5e_rx_res_rss_set_indir_uniform() occur while the RSS
state is inactive, i.e. the RQT is pointing to the drop RQ, not to the
channels' RQs.
It means that the "apply" part of the function is not called.
Remove this part from the function, and document the change. It will be
useful for next patches in the series, allows code simplifications when
multiple RSS contexts are introduced.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Andrii Nakryiko says:
====================
This patch set implements an ability for users to specify custom black box u64
value for each BPF program attachment, bpf_cookie, which is available to BPF
program at runtime. This is a feature that's critically missing for cases when
some sort of generic processing needs to be done by the common BPF program
logic (or even exactly the same BPF program) across multiple BPF hooks (e.g.,
many uniformly handled kprobes) and it's important to be able to distinguish
between each BPF hook at runtime (e.g., for additional configuration lookup).
The choice of restricting this to a fixed-size 8-byte u64 value is an explicit
design decision. Making this configurable by users adds unnecessary complexity
(extra memory allocations, extra complications on the verifier side to validate
accesses to variable-sized data area) while not really opening up new
possibilities. If user's use case requires storing more data per attachment,
it's possible to use either global array, or ARRAY/HASHMAP BPF maps, where
bpf_cookie would be used as an index into respective storage, populated by
user-space code before creating BPF link. This gives user all the flexibility
and control while keeping BPF verifier and BPF helper API simple.
Currently, similar functionality can only be achieved through:
- code-generation and BPF program cloning, which is very complicated and
unmaintainable;
- on-the-fly C code generation and further runtime compilation, which is
what BCC uses and allows to do pretty simply. The big downside is a very
heavy-weight Clang/LLVM dependency and inefficient memory usage (due to
many BPF program clones and the compilation process itself);
- in some cases (kprobes and sometimes uprobes) it's possible to do function
IP lookup to get function-specific configuration. This doesn't work for
all the cases (e.g., when attaching uprobes to shared libraries) and has
higher runtime overhead and additional programming complexity due to
BPF_MAP_TYPE_HASHMAP lookups. Up until recently, before bpf_get_func_ip()
BPF helper was added, it was also very complicated and unstable (API-wise)
to get traced function's IP from fentry/fexit and kretprobe.
With libbpf and BPF CO-RE, runtime compilation is not an option, so to be able
to build generic tracing tooling simply and efficiently, ability to provide
additional bpf_cookie value for each *attachment* (as opposed to each BPF
program) is extremely important. Two immediate users of this functionality are
going to be libbpf-based USDT library (currently in development) and retsnoop
([0]), but I'm sure more applications will come once users get this feature in
their kernels.
To achieve above described, all perf_event-based BPF hooks are made available
through a new BPF_LINK_TYPE_PERF_EVENT BPF link, which allows to use common
LINK_CREATE command for program attachments and generally brings
perf_event-based attachments into a common BPF link infrastructure.
With that, LINK_CREATE gets ability to pass throught bpf_cookie value during
link creation (BPF program attachment) time. bpf_get_attach_cookie() BPF
helper is added to allow fetching this value at runtime from BPF program side.
BPF cookie is stored either on struct perf_event itself and fetched from the
BPF program context, or is passed through ambient BPF run context, added in
c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current").
On the libbpf side of things, BPF perf link is utilized whenever is supported
by the kernel instead of using PERF_EVENT_IOC_SET_BPF ioctl on perf_event FD.
All the tracing attach APIs are extended with OPTS and bpf_cookie is passed
through corresponding opts structs.
Last part of the patch set adds few self-tests utilizing new APIs.
There are also a few refactorings along the way to make things cleaner and
easier to work with, both in kernel (BPF_PROG_RUN and BPF_PROG_RUN_ARRAY), and
throughout libbpf and selftests.
Follow-up patches will extend bpf_cookie to fentry/fexit programs.
While adding uprobe_opts, also extend it with ref_ctr_offset for specifying
USDT semaphore (reference counter) offset. Update attach_probe selftests to
validate its functionality. This is another feature (along with bpf_cookie)
required for implementing libbpf-based USDT solution.
[0] https://github.com/anakryiko/retsnoop
v4->v5:
- rebase on latest bpf-next to resolve merge conflict;
- add ref_ctr_offset to uprobe_opts and corresponding selftest;
v3->v4:
- get rid of BPF_PROG_RUN macro in favor of bpf_prog_run() (Daniel);
- move #ifdef CONFIG_BPF_SYSCALL check into bpf_set_run_ctx (Daniel);
v2->v3:
- user_ctx -> bpf_cookie, bpf_get_user_ctx -> bpf_get_attach_cookie (Peter);
- fix BPF_LINK_TYPE_PERF_EVENT value fix (Jiri);
- use bpf_prog_run() from bpf_prog_run_pin_on_cpu() (Yonghong);
v1->v2:
- fix build failures on non-x86 arches by gating on CONFIG_PERF_EVENTS.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Extend attach_probe selftests to specify ref_ctr_offset for uprobe/uretprobe
and validate that its value is incremented from zero.
Turns out that once uprobe is attached with ref_ctr_offset, uretprobe for the
same location/function *has* to use ref_ctr_offset as well, otherwise
perf_event_open() fails with -EINVAL. So this test uses ref_ctr_offset for
both uprobe and uretprobe, even though for the purpose of test uprobe would be
enough.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-17-andrii@kernel.org
|
|
When attaching to uprobes through perf subsystem, it's possible to specify
offset of a so-called USDT semaphore, which is just a reference counted u16,
used by kernel to keep track of how many tracers are attached to a given
location. Support for this feature was added in [0], so just wire this through
uprobe_opts. This is important to enable implementing USDT attachment and
tracing through libbpf's bpf_program__attach_uprobe_opts() API.
[0] a6ca88b241d5 ("trace_uprobe: support reference counter in fd-based uprobe")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-16-andrii@kernel.org
|
|
Add selftest with few subtests testing proper bpf_cookie usage.
Kprobe and uprobe subtests are pretty straightforward and just validate that
the same BPF program attached with different bpf_cookie will be triggered with
those different bpf_cookie values.
Tracepoint subtest is a bit more interesting, as it is the only
perf_event-based BPF hook that shares bpf_prog_array between multiple
perf_events internally. This means that the same BPF program can't be attached
to the same tracepoint multiple times. So we have 3 identical copies. This
arrangement allows to test bpf_prog_array_copy()'s handling of bpf_prog_array
list manipulation logic when programs are attached and detached. The test
validates that bpf_cookie isn't mixed up and isn't lost during such list
manipulations.
Perf_event subtest validates that two BPF links can be created against the
same perf_event (but not at the same time, only one BPF program can be
attached to perf_event itself), and that for each we can specify different
bpf_cookie value.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-15-andrii@kernel.org
|
|
Extract two helpers used for working with uprobes into trace_helpers.{c,h} to
be re-used between multiple uprobe-using selftests. Also rename get_offset()
into more appropriate get_uprobe_offset().
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-14-andrii@kernel.org
|
|
Add tests utilizing low-level bpf_link_create() API to create perf BPF link.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-13-andrii@kernel.org
|
|
Wire through bpf_cookie for all attach APIs that use perf_event_open under the
hood:
- for kprobes, extend existing bpf_kprobe_opts with bpf_cookie field;
- for perf_event, uprobe, and tracepoint APIs, add their _opts variants and
pass bpf_cookie through opts.
For kernel that don't support BPF_LINK_CREATE for perf_events, and thus
bpf_cookie is not supported either, return error and log warning for user.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-12-andrii@kernel.org
|
|
Add ability to specify bpf_cookie value when creating BPF perf link with
bpf_link_create() low-level API.
Given BPF_LINK_CREATE command is growing and keeps getting new fields that are
specific to the type of BPF_LINK, extend libbpf side of bpf_link_create() API
and corresponding OPTS struct to accomodate such changes. Add extra checks to
prevent using incompatible/unexpected combinations of fields.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-11-andrii@kernel.org
|
|
Detect kernel support for BPF perf link and prefer it when attaching to
perf_event, tracepoint, kprobe/uprobe. Underlying perf_event FD will be kept
open until BPF link is destroyed, at which point both perf_event FD and BPF
link FD will be closed.
This preserves current behavior in which perf_event FD is open for the
duration of bpf_link's lifetime and user is able to "disconnect" bpf_link from
underlying FD (with bpf_link__disconnect()), so that bpf_link__destroy()
doesn't close underlying perf_event FD.When BPF perf link is used, disconnect
will keep both perf_event and bpf_link FDs open, so it will be up to
(advanced) user to close them. This approach is demonstrated in bpf_cookie.c
selftests, added in this patch set.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-10-andrii@kernel.org
|
|
bpf_link->destroy() isn't used by any code, so remove it. Instead, add ability
to override deallocation procedure, with default doing plain free(link). This
is necessary for cases when we want to "subclass" struct bpf_link to keep
extra information, as is the case in the next patch adding struct
bpf_link_perf.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210815070609.987780-9-andrii@kernel.org
|
|
Ensure libbpf.so is re-built whenever libbpf.map is modified. Without this,
changes to libbpf.map are not detected and versioned symbols mismatch error
will be reported until `make clean && make` is used, which is a suboptimal
developer experience.
Fixes: 306b267cb3c4 ("libbpf: Verify versioned symbols")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-8-andrii@kernel.org
|
|
Add new BPF helper, bpf_get_attach_cookie(), which can be used by BPF programs
to get access to a user-provided bpf_cookie value, specified during BPF
program attachment (BPF link creation) time.
Naming is hard, though. With the concept being named "BPF cookie", I've
considered calling the helper:
- bpf_get_cookie() -- seems too unspecific and easily mistaken with socket
cookie;
- bpf_get_bpf_cookie() -- too much tautology;
- bpf_get_link_cookie() -- would be ok, but while we create a BPF link to
attach BPF program to BPF hook, it's still an "attachment" and the
bpf_cookie is associated with BPF program attachment to a hook, not a BPF
link itself. Technically, we could support bpf_cookie with old-style
cgroup programs.So I ultimately rejected it in favor of
bpf_get_attach_cookie().
Currently all perf_event-backed BPF program types support
bpf_get_attach_cookie() helper. Follow-up patches will add support for
fentry/fexit programs as well.
While at it, mark bpf_tracing_func_proto() as static to make it obvious that
it's only used from within the kernel/trace/bpf_trace.c.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-7-andrii@kernel.org
|
|
Add ability for users to specify custom u64 value (bpf_cookie) when creating
BPF link for perf_event-backed BPF programs (kprobe/uprobe, perf_event,
tracepoints).
This is useful for cases when the same BPF program is used for attaching and
processing invocation of different tracepoints/kprobes/uprobes in a generic
fashion, but such that each invocation is distinguished from each other (e.g.,
BPF program can look up additional information associated with a specific
kernel function without having to rely on function IP lookups). This enables
new use cases to be implemented simply and efficiently that previously were
possible only through code generation (and thus multiple instances of almost
identical BPF program) or compilation at runtime (BCC-style) on target hosts
(even more expensive resource-wise). For uprobes it is not even possible in
some cases to know function IP before hand (e.g., when attaching to shared
library without PID filtering, in which case base load address is not known
for a library).
This is done by storing u64 bpf_cookie in struct bpf_prog_array_item,
corresponding to each attached and run BPF program. Given cgroup BPF programs
already use two 8-byte pointers for their needs and cgroup BPF programs don't
have (yet?) support for bpf_cookie, reuse that space through union of
cgroup_storage and new bpf_cookie field.
Make it available to kprobe/tracepoint BPF programs through bpf_trace_run_ctx.
This is set by BPF_PROG_RUN_ARRAY, used by kprobe/uprobe/tracepoint BPF
program execution code, which luckily is now also split from
BPF_PROG_RUN_ARRAY_CG. This run context will be utilized by a new BPF helper
giving access to this user-provided cookie value from inside a BPF program.
Generic perf_event BPF programs will access this value from perf_event itself
through passed in BPF program context.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210815070609.987780-6-andrii@kernel.org
|
|
Introduce a new type of BPF link - BPF perf link. This brings perf_event-based
BPF program attachments (perf_event, tracepoints, kprobes, and uprobes) into
the common BPF link infrastructure, allowing to list all active perf_event
based attachments, auto-detaching BPF program from perf_event when link's FD
is closed, get generic BPF link fdinfo/get_info functionality.
BPF_LINK_CREATE command expects perf_event's FD as target_fd. No extra flags
are currently supported.
Force-detaching and atomic BPF program updates are not yet implemented, but
with perf_event-based BPF links we now have common framework for this without
the need to extend ioctl()-based perf_event interface.
One interesting consideration is a new value for bpf_attach_type, which
BPF_LINK_CREATE command expects. Generally, it's either 1-to-1 mapping from
bpf_attach_type to bpf_prog_type, or many-to-1 mapping from a subset of
bpf_attach_types to one bpf_prog_type (e.g., see BPF_PROG_TYPE_SK_SKB or
BPF_PROG_TYPE_CGROUP_SOCK). In this case, though, we have three different
program types (KPROBE, TRACEPOINT, PERF_EVENT) using the same perf_event-based
mechanism, so it's many bpf_prog_types to one bpf_attach_type. I chose to
define a single BPF_PERF_EVENT attach type for all of them and adjust
link_create()'s logic for checking correspondence between attach type and
program type.
The alternative would be to define three new attach types (e.g., BPF_KPROBE,
BPF_TRACEPOINT, and BPF_PERF_EVENT), but that seemed like unnecessary overkill
and BPF_KPROBE will cause naming conflicts with BPF_KPROBE() macro, defined by
libbpf. I chose to not do this to avoid unnecessary proliferation of
bpf_attach_type enum values and not have to deal with naming conflicts.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210815070609.987780-5-andrii@kernel.org
|
