summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-11net/ixgbevf: make array api static const, makes object smallerColin Ian King
Don't populate the array API on the stack but instead make it static const. Makes the object code smaller by 58 bytes. Before: text data bss dec hex filename 82969 9763 256 92988 16b3c ixgbevf/ixgbevf_main.o After: text data bss dec hex filename 82815 9859 256 92930 16b02 ixgbevf/ixgbevf_main.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11iavf: fix MAC address setting for VFs when filter is rejectedStefan Assmann
Currently iavf unconditionally applies MAC address change requests. This brings the VF in a state where it is no longer able to pass traffic if the PF rejects a MAC filter change for the VF. A typical scenario for a rejected MAC filter is for an untrusted VF to request to change the MAC address when an administratively set MAC is present. To keep iavf working in this scenario the MAC filter handling in iavf needs to act on the PF reply regarding the MAC filter change. In the case of an ack the new MAC address gets set, whereas in the case of a nack the previous MAC address needs to stay in place. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11i40e: clear __I40E_VIRTCHNL_OP_PENDING on invalid min Tx rateStefan Assmann
In the case of an invalid min Tx rate being requested i40e_ndo_set_vf_bw() immediately returns -EINVAL instead of releasing __I40E_VIRTCHNL_OP_PENDING first. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11i40e: use BIT macro to specify the cloud filter field flagsJacob Keller
The macros used to specify the cloud filter fields are intended to be individual bits. Declare them using the BIT() macro to make their intention a little more clear. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11i40e: Fix message for other card without FEC.Czeslaw Zagorski
When variable "req_fec, fec, an" are empty, dmesg shows log with "Requested FEC: , Negotiated FEC: , Autoneg:". Add link dmesg log for cards without FEC. Signed-off-by: Czeslaw Zagorski <czeslawx.zagorski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11i40e: fix missed "Negotiated" string in i40e_print_link_message()Aleksandr Loktionov
The "Negotiated" string in i40e_print_link_message() function was missed. This string has been added to the dmesg and small refactoring done removing common substrings and unifying link status message format. Without this patch it was not clear that FEC is related to negotiated FEC. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11i40e: mark additional missing bits as reservedJacob Keller
Mark bits 0xD through 0xF for the command flags of a cloud filter as reserved. These bits are not yet defined and are considered as reserved in the data sheet. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11i40e: remove I40E_AQC_ADD_CLOUD_FILTER_OIPJacob Keller
The bit 0x0001 used in the cloud filters adminq command is reserved, and is not actually a valid type. The Linux driver has never used this type, and it's not clear if any driver ever has. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11i40e: use ktime_get_real_ts64 instead of ktime_to_timespec64Jacob Keller
Remove a call to ktime_to_timespec64 by calling ktime_get_real_ts64 directly. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11ixgbe: use skb_get_queue_mapping in tx pathTonghao Zhang
Use the common api, and don't access queue_mapping directly. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11i40e: check __I40E_VF_DISABLE bit in i40e_sync_filters_subtaskStefan Assmann
While testing VF spawn/destroy the following panic occurred. BUG: unable to handle kernel NULL pointer dereference at 0000000000000029 [...] Workqueue: i40e i40e_service_task [i40e] RIP: 0010:i40e_sync_vsi_filters+0x6fd/0xc60 [i40e] [...] Call Trace: ? __switch_to_asm+0x35/0x70 ? __switch_to_asm+0x41/0x70 ? __switch_to_asm+0x35/0x70 ? _cond_resched+0x15/0x30 i40e_sync_filters_subtask+0x56/0x70 [i40e] i40e_service_task+0x382/0x11b0 [i40e] ? __switch_to_asm+0x41/0x70 ? __switch_to_asm+0x41/0x70 process_one_work+0x1a7/0x3b0 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_bind+0x30/0x30 ret_from_fork+0x35/0x40 Investigation revealed a race where pf->vf[vsi->vf_id].trusted may get accessed by the watchdog via i40e_sync_filters_subtask() although i40e_free_vfs() already free'd pf->vf. To avoid this the call to i40e_sync_vsi_filters() in i40e_sync_filters_subtask() needs to be guarded by __I40E_VF_DISABLE, which is also used by i40e_free_vfs(). Note: put the __I40E_VF_DISABLE check after the __I40E_MACVLAN_SYNC_PENDING check as the latter is more likely to trigger. CC: stable@vger.kernel.org Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11ixgbe: fix memory leaksWenwen Wang
In ixgbe_configure_clsu32(), 'jump', 'input', and 'mask' are allocated through kzalloc() respectively in a for loop body. Then, ixgbe_clsu32_build_input() is invoked to build the input. If this process fails, next iteration of the for loop will be executed. However, the allocated 'jump', 'input', and 'mask' are not deallocated on this execution path, leading to memory leaks. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11dt-bindings: net: dwmac: document 'mac-mode' propertyAlexandru Ardelean
This change documents the 'mac-mode' property that was introduced in the 'stmmac' driver to support passive mode converters that can sit in-between the MAC & PHY. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: stmmac: implement support for passive mode converters via dtAlexandru Ardelean
In-between the MAC & PHY there can be a mode converter, which converts one mode to another (e.g. GMII-to-RGMII). The converter, can be passive (i.e. no driver or OS/SW information required), so the MAC & PHY need to be configured differently. For the `stmmac` driver, this is implemented via a `mac-mode` property in the device-tree, which configures the MAC into a certain mode, and for the PHY a `phy_interface` field will hold the mode of the PHY. The mode of the PHY will be passed to the PHY and from there-on it work in a different mode. If unspecified, the default `phy-mode` will be used for both. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11mlx4: fix spelling mistake "veify" -> "verify"Colin Ian King
There is a spelling mistake in a mlx4_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: hns3: fix spelling mistake "undeflow" -> "underflow"Colin Ian King
There is a spelling mistake in a .msg literal string. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11Merge branch 'qed-Fix-series'David S. Miller
Sudarsana Reddy Kalluru says: ==================== qed* Fix series. The patch series addresses couple of issues in the recent commits. Patch (1) populates the actual dump-size of config attribute instead of providing a fixed size value. Patch(2) updates frame format of flash config buffer as required by management FW (MFW). Please consider applying it to net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11qed: Fix Config attribute frame format.Sudarsana Reddy Kalluru
MFW associates the entity id to a config attribute instead of assigning one entity id for all the config attributes. This patch incorporates driver changes to link entity id to a config id attribute. Fixes: 0dabbe1bb3a4 ("qed: Add driver API for flashing the config attributes.") Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11qed*: Fix size of config attribute dump.Sudarsana Reddy Kalluru
Driver currently returns max-buf-size as size of the config attribute. This patch incorporates changes to read this value from MFW (if available) and provide it to the user. Also did a trivial clean up in this path. Fixes: d44a3ced7023 ("qede: Add support for reading the config id attributes.") Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: lmc: fix spelling mistake "runnin" -> "running"Colin Ian King
There is a spelling mistake in the lmc_trace message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11Merge branch 'devlink-unknown'David S. Miller
Simon Horman says: ==================== devlink: add unknown 'fw_load_policy' value Dirk says: Recently we added an unknown value for the 'reset_dev_on_drv_probe' devlink parameter. Extend the 'fw_load_policy' parameter in the same way. The only driver that uses this right now is the nfp driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11nfp: devlink: set unknown fw_load_policyDirk van der Merwe
If the 'app_fw_from_flash' HWinfo key is invalid, set the 'fw_load_policy' devlink parameter value to unknown. Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11devlink: add unknown 'fw_load_policy' valueDirk van der Merwe
Similar to the 'reset_dev_on_drv_probe' devlink parameter, it is useful to have an unknown value which can be used by drivers to report that the hardware value isn't recognized or is otherwise invalid instead of failing the operation. This is especially useful for u8/enum parameters. Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11NFC: st95hf: fix spelling mistake "receieve" -> "receive"Colin Ian King
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net/rds: An rds_sock is added too early to the hash tableKa-Cheong Poon
In rds_bind(), an rds_sock is added to the RDS bind hash table before rs_transport is set. This means that the socket can be found by the receive code path when rs_transport is NULL. And the receive code path de-references rs_transport for congestion update check. This can cause a panic. An rds_sock should not be added to the bind hash table before all the needed fields are set. Reported-by: syzbot+4b4f8163c2e246df3c4c@syzkaller.appspotmail.com Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11mac80211: Do not send Layer 2 Update frame before authorizationJouni Malinen
The Layer 2 Update frame is used to update bridges when a station roams to another AP even if that STA does not transmit any frames after the reassociation. This behavior was described in IEEE Std 802.11F-2003 as something that would happen based on MLME-ASSOCIATE.indication, i.e., before completing 4-way handshake. However, this IEEE trial-use recommended practice document was published before RSN (IEEE Std 802.11i-2004) and as such, did not consider RSN use cases. Furthermore, IEEE Std 802.11F-2003 was withdrawn in 2006 and as such, has not been maintained amd should not be used anymore. Sending out the Layer 2 Update frame immediately after association is fine for open networks (and also when using SAE, FT protocol, or FILS authentication when the station is actually authenticated by the time association completes). However, it is not appropriate for cases where RSN is used with PSK or EAP authentication since the station is actually fully authenticated only once the 4-way handshake completes after authentication and attackers might be able to use the unauthenticated triggering of Layer 2 Update frame transmission to disrupt bridge behavior. Fix this by postponing transmission of the Layer 2 Update frame from station entry addition to the point when the station entry is marked authorized. Similarly, send out the VLAN binding update only if the STA entry has already been authorized. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11Revert "mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller"Daniel Drake
This reverts commit 414126f9e5abf1973c661d24229543a9458fa8ce. This commit broke eMMC storage access on a new consumer MiniPC based on AMD SoC, which has eMMC connected to: 02:00.0 SD Host controller: O2 Micro, Inc. Device 8620 (rev 01) (prog-if 01) Subsystem: O2 Micro, Inc. Device 0002 During probe, several errors are seen including: mmc1: Got data interrupt 0x02000000 even though no data operation was in progress. mmc1: Timeout waiting for hardware interrupt. mmc1: error -110 whilst initialising MMC card Reverting this commit allows the eMMC storage to be detected & usable again. Signed-off-by: Daniel Drake <drake@endlessm.com> Fixes: 414126f9e5ab ("mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-09-11Revert "mmc: bcm2835: Terminate timeout work synchronously"Stefan Wahren
The commit 37fefadee8bb ("mmc: bcm2835: Terminate timeout work synchronously") causes lockups in case of hardware timeouts due the timeout work also calling cancel_delayed_work_sync() on its own. So revert it. Fixes: 37fefadee8bb ("mmc: bcm2835: Terminate timeout work synchronously") Cc: stable@vger.kernel.org Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-09-11Merge tag 'mac80211-next-for-davem-2019-09-11' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== We have a number of changes, but things are settling down: * a fix in the new 6 GHz channel support * a fix for recent minstrel (rate control) updates for an infinite loop * handle interface type changes better wrt. management frame registrations (for management frames sent to userspace) * add in-BSS RX time to survey information * handle HW rfkill properly if !CONFIG_RFKILL * send deauth on IBSS station expiry, to avoid state mismatches * handle deferred crypto tailroom updates in mac80211 better when device restart happens * fix a spectre-v1 - really a continuation of a previous patch * advertise NL80211_CMD_UPDATE_FT_IES as supported if so * add some missing parsing in VHT extended NSS support * support HE in mac80211_hwsim * let mac80211 drivers determine the max MTU themselves along with the usual cleanups etc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11gpiolib: acpi: Add gpiolib_acpi_run_edge_events_on_boot option and blacklistHans de Goede
Another day; another DSDT bug we need to workaround... Since commit ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events at least once on boot") we call _AEI edge handlers at boot. In some rare cases this causes problems. One example of this is the Minix Neo Z83-4 mini PC, this device has a clear DSDT bug where it has some copy and pasted code for dealing with Micro USB-B connector host/device role switching, while the mini PC does not even have a micro-USB connector. This code, which should not be there, messes with the DDC data pin from the HDMI connector (switching it to GPIO mode) breaking HDMI support. To avoid problems like this, this commit adds a new gpiolib_acpi.run_edge_events_on_boot kernel commandline option, which allows disabling the running of _AEI edge event handlers at boot. The default value is -1/auto which uses a DMI based blacklist, the initial version of this blacklist contains the Neo Z83-4 fixing the HDMI breakage. Cc: stable@vger.kernel.org Cc: Daniel Drake <drake@endlessm.com> Cc: Ian W MORRISON <ianwmorrison@gmail.com> Reported-by: Ian W MORRISON <ianwmorrison@gmail.com> Suggested-by: Ian W MORRISON <ianwmorrison@gmail.com> Fixes: ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events at least once on boot") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20190827202835.213456-1-hdegoede@redhat.com Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Ian W MORRISON <ianwmorrison@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-09-11cfg80211: Purge frame registrations on iftype changeDenis Kenzior
Currently frame registrations are not purged, even when changing the interface type. This can lead to potentially weird situations where frames possibly not allowed on a given interface type remain registered due to the type switching happening after registration. The kernel currently relies on userspace apps to actually purge the registrations themselves, this is not something that the kernel should rely on. Add a call to cfg80211_mlme_purge_registrations() to forcefully remove any registrations left over prior to switching the iftype. Cc: stable@vger.kernel.org Signed-off-by: Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190828211110.15005-1-denkenz@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11lib/Kconfig: fix OBJAGG in lib/ menu structureRandy Dunlap
Keep the "Library routines" menu intact by moving OBJAGG into it. Otherwise OBJAGG is displayed/presented as an orphan in the various config menus. Fixes: 0a020d416d0a ("lib: introduce initial implementation of object aggregation manager") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Ido Schimmel <idosch@mellanox.com> Cc: David S. Miller <davem@davemloft.net> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11Merge tag 'mlx5-updates-2019-09-10' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2019-09-10 Misc build warnings cleanup for mlx5: 1) Reduce stack usage in FW trace 2) Fix addr's type in mlx5dr_icm_dm 3) Fix rt's type in dr_action_create_reformat_action ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11Merge branch 'stmmac-next'David S. Miller
Jose Abreu says: ==================== net: stmmac: Improvements for -next Misc patches for -next. It includes: - Two fixes for features in -next only - New features support for GMAC cores (which includes GMAC4 and GMAC5) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: stmmac: ARP Offload for GMAC4+ CoresJose Abreu
Implement the ARP Offload feature in GMAC4 and GMAC5 cores. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: stmmac: Add support for VLAN Insertion Offload in GMAC4+Jose Abreu
Adds support for TX VLAN Offload using descriptors based features available in GMAC4/5. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: stmmac: Add support for SA Insertion/Replacement in GMAC4+Jose Abreu
Add the support for Source Address Insertion and Replacement in GMAC4 and GMAC5 cores. Two methods are supported: Descriptor based and register based. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: stmmac: xgmac: Reinitialize correctly a variableJose Abreu
'value' was being or'ed with a value from another register. This is a typo and could cause new written value to be wrong. Fix it. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: stmmac: Add VLAN HASH filtering support in GMAC4+Jose Abreu
Adds the support for VLAN HASH Filtering in GMAC4/5 cores. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: stmmac: Prevent divide-by-zeroJose Abreu
When RX Coalesce settings are set to all zero (which is a valid setting) we will currently get a divide-by-zero error. Fix it. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: sonic: replace dev_kfree_skb in sonic_send_packetMao Wenan
sonic_send_packet will be processed in irq or non-irq context, so it would better use dev_kfree_skb_any instead of dev_kfree_skb. Fixes: d9fb9f384292 ("*sonic/natsemi/ns83829: Move the National Semi-conductor drivers") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11wimax: i2400: fix memory leakNavid Emamdoost
In i2400m_op_rfkill_sw_toggle cmd buffer should be released along with skb response. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11Merge branch 'hns3-next'David S. Miller
Huazhong Tan says: ==================== net: hns3: add a feature & bugfixes & cleanups This patch-set includes a VF feature, bugfixes and cleanups for the HNS3 ethernet controller driver. [patch 01/07] adds ethtool_ops.set_channels support for HNS3 VF driver [patch 02/07] adds a recovery for setting channel fail. [patch 03/07] fixes an error related to shaper parameter algorithm. [patch 04/07] fixes an error related to ksetting. [patch 05/07] adds cleanups for some log pinting. [patch 06/07] adds a NULL pointer check before function calling. [patch 07/07] adds some debugging information for reset issue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: hns3: add some DFX info for reset issueHuazhong Tan
This patch adds more information for reset DFX. Also, adds some cleanups to reset info, move reset_fail_cnt into struct hclge_rst_stats, and modifies some print formats. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: hns3: check NULL pointer before useGuangbin Huang
This patch checks ops->set_default_reset_request whether is NULL before using it in function hns3_slot_reset. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: hns3: modify some logs formatGuangbin Huang
The pfc_en and pfc_map need to be displayed in hexadecimal notation, printing dma address should use %pad, and the end of printed string needs to be add "\n". This patch modifies them. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: hns3: fix port setting handle for fibre portGuangbin Huang
For hardware doesn't support use specified speed and duplex to negotiate, it's unnecessary to check and modify the port speed and duplex for fibre port when autoneg is on. Fixes: 22f48e24a23d ("net: hns3: add autoneg and change speed support for fibre port") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: hns3: fix shaper parameter algorithmYonglong Liu
Currently when hns3 driver configures the tm shaper to limit bandwidth below 20Mbit using the parameters calculated by hclge_shaper_para_calc(), the actual bandwidth limited by tm hardware module is not accurate enough, for example, 1.28 Mbit when the user is configuring 1 Mbit. This patch adjusts the ir_calc to be closer to ir, and always calculate the ir_b parameter when user is configuring a small bandwidth. Also, removes an unnecessary parenthesis when calculating denominator. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: hns3: revert to old channel when setting new channel num failPeng Li
After setting new channel num, it needs free old ring memory and allocate new ring memory. If there is no enough memory and allocate new ring memory fail, the ring may initialize fail. To make sure the network interface can work normally, driver should revert the channel to the old configuration. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: hns3: add ethtool_ops.set_channels support for HNS3 VF driverGuangbin Huang
This patch adds ethtool_ops.set_channels support for HNS3 VF driver, and updates related TQP information and RSS information, to support modification of VF TQP number, and uses current rss_size instead of max_rss_size to initialize RSS. Also, fixes a format error in hclgevf_get_rss(). Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 21:48:02 +0000