summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-09-29blk-mq: Fix use after of free q->mq_mapAkinobu Mita
CPU hotplug handling for blk-mq (blk_mq_queue_reinit) updates q->mq_map by blk_mq_update_queue_map() for all request queues in all_q_list. On the other hand, q->mq_map is released before deleting the queue from all_q_list. So if CPU hotplug event occurs in the window, invalid memory access can happen. Fix it by releasing q->mq_map in blk_mq_release() to make it happen latter than removal from all_q_list. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Suggested-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-09-29blk-mq: fix sysfs registration/unregistration raceAkinobu Mita
There is a race between cpu hotplug handling and adding/deleting gendisk for blk-mq, where both are trying to register and unregister the same sysfs entries. null_add_dev --> blk_mq_init_queue --> blk_mq_init_allocated_queue --> add to 'all_q_list' (*) --> add_disk --> blk_register_queue --> blk_mq_register_disk (++) null_del_dev --> del_gendisk --> blk_unregister_queue --> blk_mq_unregister_disk (--) --> blk_cleanup_queue --> blk_mq_free_queue --> del from 'all_q_list' (*) blk_mq_queue_reinit --> blk_mq_sysfs_unregister (-) --> blk_mq_sysfs_register (+) While the request queue is added to 'all_q_list' (*), blk_mq_queue_reinit() can be called for the queue anytime by CPU hotplug callback. But blk_mq_sysfs_unregister (-) and blk_mq_sysfs_register (+) in blk_mq_queue_reinit must not be called before blk_mq_register_disk (++) and after blk_mq_unregister_disk (--) is finished. Because '/sys/block/*/mq/' is not exists. There has already been BLK_MQ_F_SYSFS_UP flag in hctx->flags which can be used to track these sysfs stuff, but it is only fixing this issue partially. In order to fix it completely, we just need per-queue flag instead of per-hctx flag with appropriate locking. So this introduces q->mq_sysfs_init_done which is properly protected with all_q_mutex. Also, we need to ensure that blk_mq_map_swqueue() is called with all_q_mutex is held. Since hctx->nr_ctx is reset temporarily and updated in blk_mq_map_swqueue(), so we should avoid blk_mq_register_hctx() seeing the temporary hctx->nr_ctx value in CPU hotplug handling or adding/deleting gendisk . Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-09-29blk-mq: avoid setting hctx->tags->cpumask before allocationAkinobu Mita
When unmapped hw queue is remapped after CPU topology is changed, hctx->tags->cpumask has to be set after hctx->tags is setup in blk_mq_map_swqueue(), otherwise it causes null pointer dereference. Fixes: f26cdc8536 ("blk-mq: Shared tag enhancements") Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-09-29s390/boot/decompression: disable floating point in decompressorChristian Borntraeger
my gcc 5.1 used an ldgr instruction with a register != 0,2,4,6 for spilling/filling into a floating point register in our decompressor. This will cause an AFP-register data exception as the decompressor did not setup the additional floating point registers via cr0. That causes a program check loop that looked like a hang with one "Uncompressing Linux... " message (directly booted via kvm) or a loop of "Uncompressing Linux... " messages (when booted via zipl boot loader). The offending code in my build was 48e400: e3 c0 af ff ff 71 lay %r12,-1(%r10) -->48e406: b3 c1 00 1c ldgr %f1,%r12 48e40a: ec 6c 01 22 02 7f clij %r6,2,12,0x48e64e but gcc could do spilling into an fpr at any function. We can simply disable floating point support at that early stage. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: stable@vger.kernel.org
2015-09-29clocksource/drivers/keystone: Fix bad NO_IRQ usageDaniel Lezcano
The current code assumes the 'irq_of_parse_and_map' will return NO_IRQ in case of failure. Unfortunately, the NO_IRQ is not consistent across the different architectures and we must not rely on it. NO_IRQ is equal to '-1' on ARM and 'irq_of_parse_and_map' returns '0' in case of an error. Hence, the latter won't be detected and will lead to a crash. Fix this by just checking 'irq' is different from zero. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-09-29clocksource/drivers/rockchip: Fix bad NO_IRQ usageDaniel Lezcano
The current code assumes the 'irq_of_parse_and_map' will return NO_IRQ in case of failure. Unfortunately, the NO_IRQ is not consistent across the different architectures and we must not rely on it. NO_IRQ is equal to '-1' on ARM and 'irq_of_parse_and_map' returns '0' in case of an error. Hence, the latter won't be detected and will lead to a crash. Fix this by just checking 'irq' is different from zero. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-09-29UBI: return ENOSPC if no enough space availableshengyong
UBI: attaching mtd1 to ubi0 UBI: scanning is finished UBI error: init_volumes: not enough PEBs, required 706, available 686 UBI error: ubi_wl_init: no enough physical eraseblocks (-20, need 1) UBI error: ubi_attach_mtd_dev: failed to attach mtd1, error -12 <= NOT ENOMEM UBI error: ubi_init: cannot attach mtd1 If available PEBs are not enough when initializing volumes, return -ENOSPC directly. If available PEBs are not enough when initializing WL, return -ENOSPC instead of -ENOMEM. Cc: stable@vger.kernel.org Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: David Gstir <david@sigma-star.at>
2015-09-29UBI: Validate data_sizeRichard Weinberger
Make sure that data_size is less than LEB size. Otherwise a handcrafted UBI image is able to trigger an out of bounds memory access in ubi_compare_lebs(). Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: David Gstir <david@sigma-star.at>
2015-09-29UBIFS: Kill unneeded locking in ubifs_init_securityRichard Weinberger
Fixes the following lockdep splat: [ 1.244527] ============================================= [ 1.245193] [ INFO: possible recursive locking detected ] [ 1.245193] 4.2.0-rc1+ #37 Not tainted [ 1.245193] --------------------------------------------- [ 1.245193] cp/742 is trying to acquire lock: [ 1.245193] (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0 [ 1.245193] [ 1.245193] but task is already holding lock: [ 1.245193] (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280 [ 1.245193] [ 1.245193] other info that might help us debug this: [ 1.245193] Possible unsafe locking scenario: [ 1.245193] [ 1.245193] CPU0 [ 1.245193] ---- [ 1.245193] lock(&sb->s_type->i_mutex_key#9); [ 1.245193] lock(&sb->s_type->i_mutex_key#9); [ 1.245193] [ 1.245193] *** DEADLOCK *** [ 1.245193] [ 1.245193] May be due to missing lock nesting notation [ 1.245193] [ 1.245193] 2 locks held by cp/742: [ 1.245193] #0: (sb_writers#5){.+.+.+}, at: [<ffffffff811ad37f>] mnt_want_write+0x1f/0x50 [ 1.245193] #1: (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280 [ 1.245193] [ 1.245193] stack backtrace: [ 1.245193] CPU: 2 PID: 742 Comm: cp Not tainted 4.2.0-rc1+ #37 [ 1.245193] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140816_022509-build35 04/01/2014 [ 1.245193] ffffffff8252d530 ffff88007b023a38 ffffffff814f6f49 ffffffff810b56c5 [ 1.245193] ffff88007c30cc80 ffff88007b023af8 ffffffff810a150d ffff88007b023a68 [ 1.245193] 000000008101302a ffff880000000000 00000008f447e23f ffffffff8252d500 [ 1.245193] Call Trace: [ 1.245193] [<ffffffff814f6f49>] dump_stack+0x4c/0x65 [ 1.245193] [<ffffffff810b56c5>] ? console_unlock+0x1c5/0x510 [ 1.245193] [<ffffffff810a150d>] __lock_acquire+0x1a6d/0x1ea0 [ 1.245193] [<ffffffff8109fa78>] ? __lock_is_held+0x58/0x80 [ 1.245193] [<ffffffff810a1a93>] lock_acquire+0xd3/0x270 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff814fc83b>] mutex_lock_nested+0x6b/0x3a0 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff8128e286>] ubifs_create+0xa6/0x1f0 [ 1.245193] [<ffffffff81198e7f>] ? path_openat+0x3af/0x1280 [ 1.245193] [<ffffffff81195d15>] vfs_create+0x95/0xc0 [ 1.245193] [<ffffffff8119929c>] path_openat+0x7cc/0x1280 [ 1.245193] [<ffffffff8109ffe3>] ? __lock_acquire+0x543/0x1ea0 [ 1.245193] [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0 [ 1.245193] [<ffffffff81088c00>] ? calc_global_load_tick+0x60/0x90 [ 1.245193] [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0 [ 1.245193] [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180 [ 1.245193] [<ffffffff8119ac55>] do_filp_open+0x75/0xd0 [ 1.245193] [<ffffffff814ffd86>] ? _raw_spin_unlock+0x26/0x40 [ 1.245193] [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180 [ 1.245193] [<ffffffff81189bd9>] do_sys_open+0x129/0x200 [ 1.245193] [<ffffffff81189cc9>] SyS_open+0x19/0x20 [ 1.245193] [<ffffffff81500717>] entry_SYSCALL_64_fastpath+0x12/0x6f While the lockdep splat is a false positive, becuase path_openat holds i_mutex of the parent directory and ubifs_init_security() tries to acquire i_mutex of a new inode, it reveals that taking i_mutex in ubifs_init_security() is in vain because it is only being called in the inode allocation path and therefore nobody else can see the inode yet. Cc: stable@vger.kernel.org # 3.20- Reported-and-tested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-and-tested-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: dedekind1@gmail.com
2015-09-29mmc: pxamci: fix card detect with slot-gpio APIRobert Jarzmik
Move pxamci to mmc slot-gpio API to fix interrupt request. It fixes the case where the card detection is on a gpio expander, on I2C for example on zylonite board. In this case, the card detect netsted interrupt is called from a threaded interrupt. The request_irq() fails, because a hard irq cannot be a nested interrupt from a threaded interrupt (set __setup_irq()). This was tested on zylonite and mioa701 boards. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-09-29mmc: sunxi: Fix clk-delay settingsHans de Goede
In recent allwinner kernel sources the mmc clk-delay settings have been slightly tweaked, and for sun9i they are completely different then what we are using. This commit brings us in sync with what allwinner does, fixing problems accessing sdcards on some A33 devices (and likely others). For pre sun9i hardware this makes the following changes: -At 400Khz change the sample delay from 7 to 0 (introduced in A31 sdk) -At 50 Mhz change the sample delay from 5 to 4 (introduced in A23 sdk) This also drops the clk-delay calculation for clocks > 50 MHz, we do not need this as we've: mmc->f_max = 50000000, and the delays in the old code were not correct (at 100 MHz the delay must be a multiple of 60, at 200 MHz a multiple of 120). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-09-29mmc: core: Don't return an error for CD/WP GPIOs when GPIOLIB is unsetUlf Hansson
When CONFIG_GPIOLIB is unset, its stubs will return -ENOSYS. That means when the mmc core parses DT for CD/WP GPIOs via mmc_of_parse(), -ENOSYS becomes propagated to the caller. Typically this means that the mmc host driver fails to probe. As the CD/WP GPIOs are already treated as optional, let's extend that to cover the case when CONFIG_GPIOLIB is unset. Reported-by: Michal Simek <michal.simek@xilinx.com> Fixes: 16b23787fc70 ("mmc: sdhci-of-arasan: Call OF parsing for MMC") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Venu Byravarasu <vbyravarasu@nvidia.com>
2015-09-29Merge tag 'keys-fixes-20150925' of ↵James Morris
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into for-linus Keyrings fixes from David Howells, for current Linus.
2015-09-29Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: - Accept a zero --itrace period, meaning "as often as possible". In the case of Intel PT that is the same as a period of 1 and a unit of 'instructions' (i.e. --itrace=i1i). (Adrian Hunter) - Harmonize itrace's synthesized callchains with the existing --max-stack tool option. (Adrian Hunter) - Allow time to be displayed in nanoseconds in 'perf script'. (Adrian Hunter) - Fix potential infinite loop when handling Intel PT timestamps. (Adrian Hunter) - Slighly improve Intel PT debug logging. (Adrian Hunter) - Warn when AUX data has been lost, just like when processing PERF_RECORD_LOST. (Adrian Hunter) - Further document export-to-postgresql.py script. (Adrian Hunter) - Add option to synthesize branch stack from auxtrace data. (Adrian Hunter) - Use equivalent logic to avoid using dso->kernel. (Arnaldo Carvalho de Melo) - Show proper error messages when parsing bad terms for hw/sw events. (He Kuang) - Tracepoint event parsing improvements. (He Kuang) - Store tracing mountpoint for better error message. (Jiri Olsa) - Add fixdep to tools/build, bringing it closer to the kernel counterpart, from where it is being lifted. (Jiri Olsa) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-28net: sctp: Don't use 64 kilobyte lookup table for four elementsDenys Vlasenko
Seemingly innocuous sctp_trans_state_to_prio_map[] array is way bigger than it looks, since "[SCTP_UNKNOWN] = 2" expands into "[0xffff] = 2" ! This patch replaces it with switch() statement. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: Neil Horman <nhorman@tuxdriver.com> CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> CC: linux-sctp@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-28l2tp: protect tunnel->del_work by ref_countAlexander Couzens
There is a small chance that tunnel_free() is called before tunnel->del_work scheduled resulting in a zero pointer dereference. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-28net/ibm/emac: bump version numbers for correct work with ethtoolIvan Mikhaylov
The size of the MAC register dump used to be the size specified by the reg property in the device tree. Userland has no good way of finding out that size, and it was not specified consistently for each MAC type, so ethtool would end up printing junk at the end of the register dump if the device tree didn't match the size it assumed. Using the new version numbers indicates unambiguously that the size of the MAC register dump is dependent only on the MAC type. Fixes: 5369c71f7ca2 ("net/ibm/emac: fix size of emac dump memory areas") Signed-off-by: Ivan Mikhaylov <ivan@ru.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-28Merge branch 'sctp-accept-deadlock'David S. Miller
Karl Heiss says: ==================== sctp: Fix SCTP deadlock These patches fix a deadlock during accept() of an SCTP connection. The first patch fixes whitespace issues. The second patch actually fixes the deadlock race. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-28sctp: Prevent soft lockup when sctp_accept() is called during a timeout eventKarl Heiss
A case can occur when sctp_accept() is called by the user during a heartbeat timeout event after the 4-way handshake. Since sctp_assoc_migrate() changes both assoc->base.sk and assoc->ep, the bh_sock_lock in sctp_generate_heartbeat_event() will be taken with the listening socket but released with the new association socket. The result is a deadlock on any future attempts to take the listening socket lock. Note that this race can occur with other SCTP timeouts that take the bh_lock_sock() in the event sctp_accept() is called. BUG: soft lockup - CPU#9 stuck for 67s! [swapper:0] ... RIP: 0010:[<ffffffff8152d48e>] [<ffffffff8152d48e>] _spin_lock+0x1e/0x30 RSP: 0018:ffff880028323b20 EFLAGS: 00000206 RAX: 0000000000000002 RBX: ffff880028323b20 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff880028323be0 RDI: ffff8804632c4b48 RBP: ffffffff8100bb93 R08: 0000000000000000 R09: 0000000000000000 R10: ffff880610662280 R11: 0000000000000100 R12: ffff880028323aa0 R13: ffff8804383c3880 R14: ffff880028323a90 R15: ffffffff81534225 FS: 0000000000000000(0000) GS:ffff880028320000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000006df528 CR3: 0000000001a85000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff880616b70000, task ffff880616b6cab0) Stack: ffff880028323c40 ffffffffa01c2582 ffff880614cfb020 0000000000000000 <d> 0100000000000000 00000014383a6c44 ffff8804383c3880 ffff880614e93c00 <d> ffff880614e93c00 0000000000000000 ffff8804632c4b00 ffff8804383c38b8 Call Trace: <IRQ> [<ffffffffa01c2582>] ? sctp_rcv+0x492/0xa10 [sctp] [<ffffffff8148c559>] ? nf_iterate+0x69/0xb0 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8148c716>] ? nf_hook_slow+0x76/0x120 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8149757d>] ? ip_local_deliver_finish+0xdd/0x2d0 [<ffffffff81497808>] ? ip_local_deliver+0x98/0xa0 [<ffffffff81496ccd>] ? ip_rcv_finish+0x12d/0x440 [<ffffffff81497255>] ? ip_rcv+0x275/0x350 [<ffffffff8145cfeb>] ? __netif_receive_skb+0x4ab/0x750 ... With lockdep debugging: ===================================== [ BUG: bad unlock balance detected! ] ------------------------------------- CslRx/12087 is trying to release lock (slock-AF_INET) at: [<ffffffffa01bcae0>] sctp_generate_timeout_event+0x40/0xe0 [sctp] but there are no more locks to release! other info that might help us debug this: 2 locks held by CslRx/12087: #0: (&asoc->timers[i]){+.-...}, at: [<ffffffff8108ce1f>] run_timer_softirq+0x16f/0x3e0 #1: (slock-AF_INET){+.-...}, at: [<ffffffffa01bcac3>] sctp_generate_timeout_event+0x23/0xe0 [sctp] Ensure the socket taken is also the same one that is released by saving a copy of the socket before entering the timeout event critical section. Signed-off-by: Karl Heiss <kheiss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-28sctp: Whitespace fixKarl Heiss
Fix indentation in sctp_generate_heartbeat_event. Signed-off-by: Karl Heiss <kheiss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-28i40e/i40evf: check for stopped admin queueMitch Williams
It's possible that while we are waiting for the spinlock, another entity (that owns the spinlock) has shut down the admin queue. If we then attempt to use the queue, we will panic. Add a check for this condition on the receive side. This matches an existing check on the send queue side. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-28i40e: fix VLAN inside VXLANJesse Brandeburg
Previously to this patch, the hardware was removing VLAN tags from the inner header of VXLAN packets. The hardware configuration can be changed to leave the packet alone since that is what the linux stack expects for this type of VLAN in VXLAN packet. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-28Input: elan_i2c - add all valid ic type for i2c/smbusduson
Signed-off-by: Duson Lin <dusonlin@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-28Input: zhenhua - ensure we have BITREVERSEAndrew Morton
It uses bitrev8(), so it must ensure that lib/bitrev.o gets included in vmlinux. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-28Input: omap4-keypad - fix memory leakSudip Mukherjee
If omap4_keypad_parse_dt() fails we returned the error code but we missed releasing keypad_data. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-28perf tools: Enable event_config terms to tracepoint eventsHe Kuang
This patch enables config terms for tracepoint perf events. Valid terms for tracepoint events are 'call-graph' and 'stack-size', so we can use different callgraph settings for each event and eliminate unnecessary overhead. Here is an example for using different call-graph config for each tracepoint. $ perf record -e syscalls:sys_enter_write/call-graph=fp/ -e syscalls:sys_exit_write/call-graph=no/ dd if=/dev/zero of=test bs=4k count=10 $ perf report --stdio # # Total Lost Samples: 0 # # Samples: 13 of event 'syscalls:sys_enter_write' # Event count (approx.): 13 # # Children Self Command Shared Object Symbol # ........ ........ ....... .................. ...................... # 76.92% 76.92% dd libpthread-2.20.so [.] __write_nocancel | ---__write_nocancel 23.08% 23.08% dd libc-2.20.so [.] write | ---write | |--33.33%-- 0x2031342820736574 | |--33.33%-- 0xa6e69207364726f | --33.33%-- 0x34202c7320393039 ... # Samples: 13 of event 'syscalls:sys_exit_write' # Event count (approx.): 13 # # Children Self Command Shared Object Symbol # ........ ........ ....... .................. ...................... # 76.92% 76.92% dd libpthread-2.20.so [.] __write_nocancel 23.08% 23.08% dd libc-2.20.so [.] write 7.69% 0.00% dd [unknown] [.] 0x0a6e69207364726f 7.69% 0.00% dd [unknown] [.] 0x2031342820736574 7.69% 0.00% dd [unknown] [.] 0x34202c7320393039 Signed-off-by: He Kuang <hekuang@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1443412336-120050-4-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf tools: Adds the tracepoint name parsing supportHe Kuang
Adds rules for parsing tracepoint names. Change rules of tracepoint which derives from PE_NAMEs into tracepoint names directly, so adding more rules based on tracepoint names will be easier. Changes v2-v3: - Change __event_legacy_tracepoint label in bison file to tracepoint_name - Fix formats error. Signed-off-by: He Kuang <hekuang@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1443412336-120050-3-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf tools: Show proper error message for wrong terms of hw/sw eventsHe Kuang
Show proper error message and show valid terms when wrong config terms is specified for hw/sw type perf events. This patch makes the original error format function formats_error_string() more generic, which only outputs the static config terms for hw/sw perf events, and prepends pmu formats for pmu events. Before this patch: $ perf record -e 'cpu-clock/freqx=200/' -a sleep 1 invalid or unsupported event: 'cpu-clock/freqx=200/' Run 'perf list' for a list of valid events usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events After this patch: $ perf record -e 'cpu-clock/freqx=200/' -a sleep 1 event syntax error: 'cpu-clock/freqx=200/' \___ unknown term valid terms: config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size Run 'perf list' for a list of valid events usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events Signed-off-by: He Kuang <hekuang@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1443412336-120050-2-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf tools: Adds the config_term callback for different type eventsHe Kuang
Currently, function config_term() is used for checking config terms of all types of events, while unknown terms is not reported as an error because pmu events have valid terms in sysfs. But this is wrong when unknown terms are specificed to hw/sw events. This patch Adds the config_term callback so we can use separate check routines for each type of events. Signed-off-by: He Kuang <hekuang@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1443412336-120050-1-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf intel-pt: Add mispred-all config option to aid use with autofdoAdrian Hunter
autofdo incorrectly expects branch flags to include either mispred or predicted. In fact mispred = predicted = 0 is valid and means the flags are not supported, which they aren't by Intel PT. To make autofdo work, add a config option which will cause Intel PT decoder to set the mispred flag on all branches. Below is an example of using Intel PT with autofdo. The example is also added to the Intel PT documentation. It requires autofdo (https://github.com/google/autofdo) and gcc version 5. The bubble sort example is from the AutoFDO tutorial (https://gcc.gnu.org/wiki/AutoFDO/Tutorial) amended to take the number of elements as a parameter. $ gcc-5 -O3 sort.c -o sort_optimized $ ./sort_optimized 30000 Bubble sorting array of 30000 elements 2254 ms $ cat ~/.perfconfig [intel-pt] mispred-all $ perf record -e intel_pt//u ./sort 3000 Bubble sorting array of 3000 elements 58 ms [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 3.939 MB perf.data ] $ perf inject -i perf.data -o inj --itrace=i100usle --strip $ ./create_gcov --binary=./sort --profile=inj --gcov=sort.gcov -gcov_version=1 $ gcc-5 -O3 -fauto-profile=sort.gcov sort.c -o sort_autofdo $ ./sort_autofdo 30000 Bubble sorting array of 30000 elements 2155 ms Note there is currently no advantage to using Intel PT instead of LBR, but that may change in the future if greater use is made of the data. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-26-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf inject: Add --strip option to strip out non-synthesized eventsAdrian Hunter
Add a new option --strip which is used with --itrace to strip out non-synthesized events. This results in a perf.data file that is simpler for external tools to parse. In particular, this can be used to prepare a perf.data file for consumption by autofdo. A subsequent patch makes a change to Intel PT also to enable use with autofdo and gives an example of that use. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-25-git-send-email-adrian.hunter@intel.com [ Made it use perf_evlist__remove() + perf_evsel__delete() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf inject: Remove more aux-related stuff when processing instruction tracesAdrian Hunter
perf inject can process instruction traces (using the --itrace option) which removes aux-related events and replaces them with the requested synthesized events. However there are still some leftovers, namely PERF_RECORD_ITRACE_START events and the original evsel (selected event) e.g. intel_pt// For the sake of completeness, remove them too. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-24-git-send-email-adrian.hunter@intel.com [ Made it use perf_evlist__remove() + perf_evsel__delete() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf evlist: Add perf_evlist__remove()Adrian Hunter
Add a counterpart to perf_evlist__add() that does the opposite and deletes the evsel. This will be used by perf inject to remove unwanted evsels. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-23-git-send-email-adrian.hunter@intel.com [ Renamed it from perf_evlist__del() to perf_evlist__remove() and removed the perf_evsel__delete() call ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf evlist: Add perf_evlist__id2evsel_strict()Adrian Hunter
perf_evlist__id2evsel_strict() is the same as perf_evlist__id2evsel() except that it ensures that the id must match. This will be used by perf inject to find a specific evsel that is to be deleted, hence the need to match exactly. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-22-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf script: Make scripting_max_stack value allow for synthesized callchainsAdrian Hunter
perf script has a setting to set the maximum stack depth when processing callchains. The setting defaults to the hard-coded maximum definition PERF_MAX_STACK_DEPTH which is 127. It is possible, when processing instruction traces, to synthesize callchains. Synthesized callchains do not have the kernel size limitation and are whatever size the user requests, although validation presently prevents the user requested a value greater that 1024. The default value is 16. To allow for synthesized callchains, make the scripting_max_stack value at least the same size as the synthesized callchain size. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-21-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf scripting python: Allow for max_stack greater than PERF_MAX_STACK_DEPTHAdrian Hunter
Use the scripting_max_stack value to allow for values greater than PERF_MAX_STACK_DEPTH. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-20-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf script: Add a setting for maximum stack depthAdrian Hunter
Add a setting for maximum stack depth in preparation for allowing for synthesized callchains. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-19-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf hists: Allow for max_stack greater than PERF_MAX_STACK_DEPTHAdrian Hunter
Use the max_stack value instead of PERF_MAX_STACK_DEPTH so that arbitrary-sized callchains can be supported. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-17-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf report: Make max_stack value allow for synthesized callchainsAdrian Hunter
perf report has an option (--max-stack) to set the maximum stack depth when processing callchains. The option defaults to the hard-coded maximum definition PERF_MAX_STACK_DEPTH which is 127. The intention of the option is to allow the user to reduce the processing time by reducing the amount of the callchain that is processed. It is also possible, when processing instruction traces, to synthesize callchains. Synthesized callchains do not have the kernel size limitation and are whatever size the user requests, although validation presently prevents the user requested a value greater that 1024. The default value is 16. To allow for synthesized callchains, make the max_stack value at least the same size as the synthesized callchain size. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-16-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf intel-pt: Support generating branch stackAdrian Hunter
Add support for generating branch stack context for PT samples. The decoder reports a configurable number of branches as branch context for each sample. Internally it keeps track of them by using a simple sliding window. We also flush the last branch buffer on each sample to avoid overlapping intervals. This is useful for: - Reporting accurate basic block edge frequencies through the perf report branch view - Using with --branch-history to get the wider context of samples - Other users of LBRs Also the Documentation is updated. Examples: Record with Intel PT: perf record -e intel_pt//u ls Branch stacks are used by default if synthesized so: perf report --itrace=ile is the same as: perf report --itrace=ile -b Branch history can be requested also: perf report --itrace=igle --branch-history Based-on-patch-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-15-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf intel-pt: Move branch filter logicAdrian Hunter
intel_pt_synth_branch_sample() skips synthesizing if the branch does not match the branch filter. That logic was sitting in the middle of the function but is more efficiently placed at the start of the function, so move it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-14-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf inject: Set branch stack feature flag when synthesizing branch stacksAdrian Hunter
The branch stack feature flag is set by 'perf record' when recording data that contains branch stacks. Consequently, when 'perf inject' synthesizes branch stacks, the feature flag should be set also. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-13-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf report: Skip events with null branch stacksAdrian Hunter
A non-synthesized event might not have a branch stack if branch stacks have been synthesized (using itrace options). An example of that is when Intel PT records sched_switch events for decoding purposes. Those sched_switch events do not have branch stacks even though the Intel PT decoder may be synthesizing other events that do due to the itrace options. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-12-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf report: Also do default setup for synthesized branch stacksAdrian Hunter
The 'perf report' tool will default to displaying branch stacks (-b option) if they are present. Make that also happen for synthesized branch stacks. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-11-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf report: Adjust sample type validation for synthesized branch stacksAdrian Hunter
perf report looks at event sample types to determine if branch stacks have been sampled. Adjust the validation to know about instruction tracing options. This change allows the use of the -b option which otherwise would complain with an error like: Error: Selected -b but no branch data. Did you call perf record without -b? # To display the perf.data header info, # please use --header/--header-only options. # Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-10-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf auxtrace: Add option to synthesize branch stacks on samplesAdrian Hunter
Add AUX area tracing option 'l' to synthesize branch stacks on samples just like sample type PERF_SAMPLE_BRANCH_STACK. This is taken into use by Intel PT in a subsequent patch. Based-on-patch-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-9-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf tools: Add more documentation to export-to-postgresql.py scriptAdrian Hunter
Add some comments to the script and some 'views' to the created database that better illustrate the database structure and how it can be used. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-8-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf session: Warn when AUX data has been lostAdrian Hunter
By default 'perf record' will postprocess the perf.data file to determine build-ids. When that happens, the number of lost perf events is displayed. Make that also happen for AUX events. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-7-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf script: Allow time to be displayed in nanosecondsAdrian Hunter
Add option --ns to display time to 9 decimal places. That is useful in some cases, for example when using Intel PT cycle accurate mode. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-6-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28perf intel-pt: Make logging slightly more efficientAdrian Hunter
Logging is only used for debugging. Use macros to save calling into the functions only to return immediately when logging is not enabled. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443186956-18718-5-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-12 10:23:43 +0000