| Age | Commit message (Collapse) | Author |
|---|
|
xfs_zone_gc_write_chunk writes out the data buffer read in earlier using
the same bio, and currenly looks at bv_offset for the offset into the
scratch folio for that. But commit 26064d3e2b4d ("block: fix adding
folio to bio") changed how bv_page and bv_offset are calculated for
adding larger folios, breaking this fragile logic.
Switch to extracting the full physical address from the old bio_vec,
and calculate the offset into the folio from that instead.
This fixes data corruption during garbage collection with heavy rockdsb
workloads. Thanks to Hans for tracking down the culprit commit during
long bisection sessions.
Fixes: 26064d3e2b4d ("block: fix adding folio to bio")
Fixes: 080d01c41d44 ("xfs: implement zoned garbage collection")
Reported-by: Hans Holmberg <Hans.Holmberg@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <Hans.Holmberg@wdc.com>
Tested-by: Hans Holmberg <Hans.Holmberg@wdc.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
In xfs_init_percpu_counters(), memory for mp->m_free[0].count wasn't freed
in error case. Free it up in this patch.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Fixes: 712bae96631852 ("xfs: generalize the freespace and reserved blocks handling")
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
smp_store_mb() inserts memory barrier after storing operation.
It is different with what the comment is originally aiming so Null
pointer dereference can be happened if memory update is reordered.
Signed-off-by: Hyejeong Choi <hjeong.choi@samsung.com>
Fixes: a590d0fdbaa5 ("dma-buf: Update reservation shared_count after adding the new fence")
CC: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250513020638.GA2329653@au1-maretx-p37.eng.sarc.samsung.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
The first namespace configured in a subsystem sets the subsystem's
atomic write size based on its AWUPF or NAWUPF. Subsequent namespaces
must have an atomic write size (per their AWUPF or NAWUPF) less than or
equal to the subsystem's atomic write size, or their probing will be
rejected.
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
[hch: fold in review comments from John Garry]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
|
|
On AMD SoC platforms with an ACP2x gpu ip block (such as stoneyridge),
the amdgpu driver will create several platform devices for the ACP ASoC
driver to communicate with the ACP hardware block on the gpu. These
platform devices include dma for audio and one or multiple i2s
interfaces. The amdgpu driver has always created these platform devices
with automatic ids. The ASoC machine drives hardcode the platform device
name. This creates an issue where if the ACP platform devices are not
the first to be created, the ids can be different to what the machine
drivers expect, causing them to not find the ACP platform devices and
failing to load. Switch to using static ids for these ACP platform
devices so that the names never change.
Depends on patch: drm/amdgpu: use static ids for ACP platform devs [1]
[1] https://lore.kernel.org/all/20250325210517.2097188-1-bradynorander@gmail.com/
Signed-off-by: Brady Norander <bradynorander@gmail.com>
Link: https://patch.msgid.link/20250330130844.37870-2-bradynorander@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
"mediatek,clk-provider" property is a string, not an string array, thus
"items" is not really correct.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250514105702.28622-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Initialize "ret" with "-EINVAL" to handle cases where "strstr()" for
"codec_dai->component->name_prefix" doesn't find "-1" nor "-2". In that
case "name_prefix" is invalid because for current implementation it's
expected to have either "-1" or "-2" in it. (Maybe "-3", "-4" and so on
in the future.)
Link: https://scan5.scan.coverity.com/#/project-view/36179/10063?selectedIssue=1627120
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Link: https://patch.msgid.link/20250505185423.680608-1-richard120310@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Not everything requires locking in there, which is why the 'has_lock'
variable exists. But enough does that it's a bit unwieldy to manage.
Wrap the whole thing in a ->uring_lock trylock, and just return
with no output if we fail to grab it. The existing trylock() will
already have greatly diminished utility/output for the failure case.
This fixes an issue with reading the SQE fields, if the ring is being
actively resized at the same time.
Reported-by: Jann Horn <jannh@google.com>
Fixes: 79cfe9e59c2a ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The xarray can return the previous entry at a location. Use this
fact to simplify the brd code when there is no existing page at
a location. This also slighly improves the handling of racy
discards as we now always have a page under RCU protection by the
time we are ready to copy the data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250507060700.3929430-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 9bc1e897a821 ("blk-mq: remove unused queue mapping helpers") makes
the two config options, BLK_MQ_PCI and BLK_MQ_VIRTIO, have no remaining
effect.
Remove the two obsolete config options.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250514065513.463941-1-lukas.bulwahn@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If device_add() fails, do not use device_unregister() for error
handling. device_unregister() consists two functions: device_del() and
put_device(). device_unregister() should only be called after
device_add() succeeded because device_del() undoes what device_add()
does if successful. Change device_unregister() to put_device() call
before returning from the function.
As comment of device_add() says, 'if device_add() succeeds, you should
call device_del() when you want to get rid of it. If device_add() has
not succeeded, use only put_device() to drop the reference count'.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250303072739.3874987-1-make24@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
phy-rcar-gen3-usb2 driver exports 4 PHYs. The timing registers are common
to all PHYs. There is no need to set them every time a PHY is initialized.
Set timing register only when the 1st PHY is initialized.
Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver")
Cc: stable@vger.kernel.org
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250507125032.565017-6-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Assert PLL reset on PHY power off. This saves power.
Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver")
Cc: stable@vger.kernel.org
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250507125032.565017-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are
requested and configured by PHY users. The struct phy_ops APIs access the
same set of registers to configure all PHYs. Additionally, PHY settings can
be modified through sysfs or an IRQ handler. While some struct phy_ops APIs
are protected by a driver-wide mutex, others rely on individual
PHY-specific mutexes.
This approach can lead to various issues, including:
1/ the IRQ handler may interrupt PHY settings in progress, racing with
hardware configuration protected by a mutex lock
2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread
suspends to wait for the delay, another thread may try to configure
another PHY (with phy_init() + phy_power_on()); re-running the
phy_init() goes to the exact same configuration code, re-running the
same hardware configuration on the same set of registers (and bits)
which might impact the result of the msleep for the 1st configuring
thread
3/ sysfs can configure the hardware (though role_store()) and it can
still race with the phy_init()/phy_power_on() APIs calling into the
drivers struct phy_ops
To address these issues, add a spinlock to protect hardware register access
and driver private data structures (e.g., calls to
rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains
necessary as all PHY instances share common settings. With this change,
the existing mutex protection is removed and the cleanup.h helpers are
used.
While at it, to keep the code simpler, do not skip
regulator_enable()/regulator_disable() APIs in
rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the
regulators enable/disable operations are reference counted anyway.
Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver")
Cc: stable@vger.kernel.org
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250507125032.565017-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 08b0ad375ca6 ("phy: renesas: rcar-gen3-usb2: move IRQ registration
to init") moved the IRQ request operation from probe to
struct phy_ops::phy_init API to avoid triggering interrupts (which lead to
register accesses) while the PHY clocks (enabled through runtime PM APIs)
are not active. If this happens, it results in a synchronous abort.
One way to reproduce this issue is by enabling CONFIG_DEBUG_SHIRQ, which
calls free_irq() on driver removal.
Move the IRQ request and free operations back to probe, and take the
runtime PM state into account in IRQ handler. This commit is preparatory
for the subsequent fixes in this series.
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250507125032.565017-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
It has been observed on the Renesas RZ/G3S SoC that unbinding and binding
the PHY driver leads to role autodetection failures. This issue occurs when
PHY 3 is the first initialized PHY. PHY 3 does not have an interrupt
associated with the USB2_INT_ENABLE register (as
rcar_gen3_int_enable[3] = 0). As a result, rcar_gen3_init_otg() is called
to initialize OTG without enabling PHY interrupts.
To resolve this, add rcar_gen3_is_any_otg_rphy_initialized() and call it in
role_store(), role_show(), and rcar_gen3_init_otg(). At the same time,
rcar_gen3_init_otg() is only called when initialization for a PHY with
interrupt bits is in progress. As a result, the
struct rcar_gen3_phy::otg_initialized is no longer needed.
Fixes: 549b6b55b005 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs")
Cc: stable@vger.kernel.org
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250507125032.565017-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We used to take a lock in tegra186_utmi_bias_pad_power_on() but now we
have moved the lock into the caller. Unfortunately, when we moved the
lock this unlock was left behind and it results in a double unlock.
Delete it now.
Fixes: b47158fb4295 ("phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/aAjmR6To4EnvRl4G@stanley.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
With the goal of deprecating / removing VOLUNTARY preempt, live-patch
needs to stop relying on cond_resched() to make forward progress.
Instead, rely on schedule() with TASK_FREEZABLE set. Just like
live-patching, the freezer needs to be able to stop tasks in a safe /
known state.
[bigeasy: use likely() in __klp_sched_try_switch() and update comments]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Tested-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20250509113659.wkP_HJ5z@linutronix.de
|
|
After elf_update_group_sh_info() was introduced, a prototype version of
"objtool klp diff" went from taking ~1s to several minutes, due to
looping almost endlessly in elf_update_group_sh_info() while creating
thousands of local symbols in a file with thousands of sections.
Dramatically improve the performance by marking all symbols' correlated
SHT_GROUP sections while reading the object. That way there's no need
to search for it every time a symbol gets reindexed.
Fixes: 2cb291596e2c ("objtool: Fix up st_info in COMDAT group section")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Rong Xu <xur@google.com>
Link: https://lkml.kernel.org/r/2a33e583c87e3283706f346f9d59aac20653b7fd.1746662991.git.jpoimboe@kernel.org
|
|
The two alarm LEDs of on the uDPU board are stopped working since
commit 78efa53e715e ("leds: Init leds class earlier").
The LEDs are driven by the GPIO{15,16} pins of the North Bridge
GPIO controller. These pins are part of the 'spi_quad' pin group
for which the 'spi' function is selected via the default pinctrl
state of the 'spi' node. This is wrong however, since in order to
allow controlling the LEDs, the pins should use the 'gpio' function.
Before the commit mentined above, the 'spi' function is selected
first by the pinctrl core before probing the spi driver, but then
it gets overridden to 'gpio' implicitly via the
devm_gpiod_get_index_optional() call from the 'leds-gpio' driver.
After the commit, the LED subsystem gets initialized before the
SPI subsystem, so the function of the pin group remains 'spi'
which in turn prevents controlling of the LEDs.
Despite the change of the initialization order, the root cause is
that the pinctrl state definition is wrong since its initial commit
0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board"),
To fix the problem, override the function in the 'spi_quad_pins'
node to 'gpio' and move the pinctrl state definition from the
'spi' node into the 'leds' node.
Cc: stable@vger.kernel.org # needs adjustment for < 6.1
Fixes: 0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The pNFS layout support has been around for 10 years without major
issues, drop the EXPERIMENTAL warning.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Online fsck was finished a year ago, in Linux 6.10. The exchange-range
syscall and parent pointers were merged in the same cycle. None of
these have encountered any serious errors in the year that they've been
in the kernel (or the many many years they've been under development) so
let's drop the shouty warnings.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Required update due to conflict with patch:
xfs: stop using set_blocksize
Conflicts:
fs/xfs/xfs_buf.c
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Now that .msi_prepare() gets called at the right time and not
with semi-random parameters, remove the ugly hack that tried
to fix up the number of allocated vectors.
It is now correct by construction.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513163144.2215824-6-maz@kernel.org
|
|
Kindly inform the MSI driver that the domain is torn down, providing the
allocation context previously populated on domain creation.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513163144.2215824-5-maz@kernel.org
|
|
The current device MSI infrastructure is subtly broken, as it will issue an
.msi_prepare() callback into the MSI controller driver every time it needs
to allocate an MSI. That's pretty wrong, as the contract (or unwarranted
assumption, depending who you ask) between the MSI controller and the core
code is that .msi_prepare() is called exactly once per device.
This leads to some subtle breakage in some MSI controller drivers, as it
gives the impression that there are multiple endpoints sharing a bus
identifier (RID in PCI parlance, DID for GICv3+). It implies that whatever
allocation the ITS driver (for example) has done on behalf of these devices
cannot be undone, as there is no way to track the shared state. This is
particularly bad for wire-MSI devices, for which .msi_prepare() is called
for each input line.
To address this issue, move the call to .msi_prepare() to take place at the
point of irq domain allocation, which is the only place that makes
sense. The msi_alloc_info_t structure is made part of the
msi_domain_template, so that its life-cycle is that of the domain as well.
Finally, the msi_info::alloc_data field is made to point at this allocation
tracking structure, ensuring that it is carried around the block.
This is all pretty straightforward, except for the non-device-MSI
leftovers, which still have to call .msi_prepare() at the old spot. One
day...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513163144.2215824-4-maz@kernel.org
|
|
The ITS driver currently nukes the structure representing an endpoint
device translating via an ITS on freeing the last LPI allocated for it.
That's an unfortunate state of affair, as it is pretty common for a driver
to allocate a single MSI, do something clever, teardown this MSI, and
reallocate a whole bunch of them. The NVME driver does exactly that,
amongst others.
What happens in that case is that the core code is accidentaly issuing
another .msi_prepare() call, even if it shouldn't. This luckily cancels
the above behaviour and hides the problem.
In order to fix the core code, start by implementing the new
.msi_teardown() callback. Nothing calls it yet, so a side effect is that
the its_dev structure will not be freed and that the DID will stay
mapped. Not a big deal, and this will be solved in following patches.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513163144.2215824-3-maz@kernel.org
|
|
While the MSI ops do have a .msi_prepare() callback that is responsible for
setting up the relevant (usually per-device) allocation, there is no
callback reversing this setup.
For this purpose, add .msi_teardown() callback.
In order to avoid breaking the ITS driver that suffers from related issues,
do not call the callback just yet.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513163144.2215824-2-maz@kernel.org
|
|
Commit 64af7a6ea5a4 ("xfs: remove deprecated sysctls") removed the
deprecated xfsbufd-related sysctl interface, but forgot to delete the
corresponding parameters: "xfs_buf_timer" and "xfs_buf_age".
This patch removes those parameters and makes no other changes.
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
XFS has its own buffer cache for metadata that uses submit_bio, which
means that it no longer uses the block device pagecache for anything.
Create a more lightweight helper that runs the blocksize checks and
flushes dirty data and use that instead. No more truncating the
pagecache because XFS does not use it or care about it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block into xfs-6.16-merge
Merging block tree into XFS because of some dependencies like
bdev_validate_blocksize()
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The function snd_es1968_capture_open() calls the function
snd_pcm_hw_constraint_pow2(), but does not check its return
value. A proper implementation can be found in snd_cx25821_pcm_open().
Add error handling for snd_pcm_hw_constraint_pow2() and propagate its
error code.
Fixes: b942cf815b57 ("[ALSA] es1968 - Fix stuttering capture")
Cc: stable@vger.kernel.org # v2.6.22
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250514092444.331-1-vulab@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit 8589e325ba4f ("genirq/manage: Rework irq_set_irq_wake()") updated
the irq_set_irq_wake() to use the new guards for locking the interrupt
descriptor.
However, in doing so it inadvertently changed irq_set_irq_wake() such that
the 'chip_bus_lock' is no longer acquired. This has caused system suspend
tests to fail on some Tegra platforms.
Fix this by correcting the guard used in irq_set_irq_wake() to ensure the
'chip_bus_lock' is held.
Fixes: 8589e325ba4f ("genirq/manage: Rework irq_set_irq_wake()")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250514095041.1109783-1-jonathanh@nvidia.com
|
|
Add device tree binding documentation for Everest ES8389 which
is different from ES8388
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250514094546.35508-3-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver is for codec es8389 of everest which is different from ES8388
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20250514094546.35508-2-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The user may set req->src even if req->nbytes == 0. If there
is no data to hash from req->src, do not generate an empty TDMA
descriptor.
Fixes: db509a45339f ("crypto: marvell/cesa - add TDMA support")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Do not access random memory for zero-length skcipher requests.
Just return 0.
Fixes: f63601fd616a ("crypto: marvell/cesa - add a new driver for Marvell's CESA")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a SIMD fallback path for poly1305-p10 by converting the 2^64
based hash state into a 2^44 base. In order to ensure that the
generic fallback is actually 2^44, add ARCH_SUPPORTS_INT128 to
powerpc and make poly1305-p10 depend on it.
Fixes: ba8f8624fde2 ("crypto: poly1305-p10 - Glue code for optmized Poly1305 implementation for ppc64le")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The function opencodes for_each_cpu() by using a plain for-loop. The
loop calls cpumask_weight() inside the conditional section. Because
cpumask_weight() is O(1), the overall complexity of the function is
O(node * node_cpus^2). Also, cpumask_nth() internally calls hweight(),
which, if not hardware accelerated, is slower than cpumask_next() in
for_each_cpu().
If switched to the dedicated for_each_cpu(), the rebalance_wq_table()
can drop calling cpumask_weight(), together with some housekeeping code.
This makes the overall complexity O(node * node_cpus), or simply speaking
O(nr_cpu_ids).
While there, fix opencoded for_each_possible_cpu() too.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The pcim_iomap_region() returns error pointers. It doesn't return NULL
pointers. Update the check to match.
Fixes: 17fd7514ae68 ("crypto: qat - add qat_6xxx driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The hardware supports multiple MAC types, including RPM, SDP, and LBK.
However, features such as link settings and pause frames are only available
on RPM MAC, and not supported on SDP or LBK.
This patch updates the ethtool operations logic accordingly to reflect
this behavior.
Fixes: 2f7f33a09516 ("octeontx2-pf: Add representors for sdp MAC")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
max20086_parse_regulators_dt() calls of_regulator_match() using an
array of struct of_regulator_match allocated on the stack for the
matches argument.
of_regulator_match() calls devm_of_regulator_put_matches(), which calls
devres_alloc() to allocate a struct devm_of_regulator_matches which will
be de-allocated using devm_of_regulator_put_matches().
struct devm_of_regulator_matches is populated with the stack allocated
matches array.
If the device fails to probe, devm_of_regulator_put_matches() will be
called and will try to call of_node_put() on that stack pointer,
generating the following dmesg entries:
max20086 6-0028: Failed to read DEVICE_ID reg: -121
kobject: '\xc0$\xa5\x03' (000000002cebcb7a): is not initialized, yet
kobject_put() is being called.
Followed by a stack trace matching the call flow described above.
Switch to allocating the matches array using devm_kcalloc() to
avoid accessing the stack pointer long after it's out of scope.
This also has the advantage of allowing multiple max20086 to probe
without overriding the data stored inside the global of_regulator_match.
Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Link: https://patch.msgid.link/20250508064947.2567255-1-demonsingur@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The cs35l56 smart amplifier has some informational firmware controls
that are populated by a tuning bin file to unique values - logging these
during firmware load identifies the specific configuration being used on
that device instance.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/2fcc0e6fc5b8669acb026bebe44a4995ac83b967.1747142267.git.simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The cs35l56 smart amplifier has some informational firmware controls
that are populated by a tuning bin file to unique values - logging these
during firmware load identifies the specific configuration being used on
that device instance.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/47762a5f1ce2b178ad863c6698296aea09b72e10.1747142267.git.simont@opensource.cirrus.com
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SPI interface is activated before the CPOL setting is applied. In
that moment, the clock idles high and CS goes low. After a short delay,
CPOL and other settings are applied, which may cause the clock to change
state and idle low. This transition is not part of a clock cycle, and it
can confuse the receiving device.
To prevent this unexpected transition, activate the interface while CPOL
and the other settings are being applied.
Signed-off-by: Alessandro Grassi <alessandro.grassi@mailbox.org>
Link: https://patch.msgid.link/20250502095520.13825-1-alessandro.grassi@mailbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When using HDMI PLL frequency division coefficient at 50.25MHz
that is calculated by rk_hdptx_phy_clk_pll_calc(), it fails to
get PHY LANE lock. Although the calculated values are within the
allowable range of PHY PLL configuration.
In order to fix the PHY LANE lock error and provide the expected
50.25MHz output, manually compute the required PHY PLL frequency
division coefficient and add it to ropll_tmds_cfg configuration
table.
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250427095124.3354439-1-algea.cao@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
JH7110 USB 2.0 host fails to detect USB 2.0 devices occasionally. With a
long time of debugging and testing, we found that setting Rx clock gating
control signal to normal power consumption mode can solve this problem.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20250422101244.51686-1-hal.feng@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Because current PWM Kconfig is sorting by symbol name,
it looks strange ordering in menuconfig.
=> [ ] Renesas R-Car PWM support
=> [ ] Renesas TPU PWM support
[ ] Rockchip PWM support
=> [ ] Renesas RZ/G2L General PWM Timer support
=> [ ] Renesas RZ/G2L MTU3a PWM Timer support
Let's use common CONFIG_PWM_RENESAS_xxx symbol name for Renesas,
and sort it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/877c2mxrrr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into pwm/for-next
Renesas ARM defconfig updates for v6.16 (take two)
- Enable modular support for the Renesas RZ/G2L GPT and MSIOF sound in
the ARM64 defconfig,
- Enable more support for RZN1D-DB/EB in shmobile_defconfig.
It is merged into the pwm tree due to the next patch renaming
PWM_RZG2L_GPT which has a use added in the arm64 defconfig.
|
|
The global pseudo-constants 'page_offset_base', 'vmalloc_base' and
'vmemmap_base' are not used extremely early during the boot, and cannot be
used safely until after the KASLR memory randomization code in
kernel_randomize_memory() executes, which may update their values.
So there is no point in setting these variables extremely early, and it
can wait until after the kernel itself is mapped and running from its
permanent virtual mapping.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250513111157.717727-9-ardb+git@google.com
|
