summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-27benet: fix return value check in be_lancer_xmit_workarounds()Yuanjun Gong
in be_lancer_xmit_workarounds(), it should go to label 'tx_drop' if an unexpected value is returned by pskb_trim(). Fixes: 93040ae5cc8d ("be2net: Fix to trim skb for padded vlan packets to workaround an ASIC Bug") Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Link: https://lore.kernel.org/r/20230725032726.15002-1-ruc_gongyuanjun@163.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-27staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext()Zhang Shurong
The "exc->key_len" is a u16 that comes from the user. If it's over IW_ENCODING_TOKEN_MAX (64) that could lead to memory corruption. Fixes: b121d84882b9 ("staging: ks7010: simplify calls to memcpy()") Cc: stable <stable@kernel.org> Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/tencent_5153B668C0283CAA15AA518325346E026A09@qq.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27staging: fbtft: ili9341: use macro FBTFT_REGISTER_SPI_DRIVERRaphael Gallais-Pou
Using FBTFT_REGISTER_DRIVER resolves to a NULL struct spi_device_id. This ultimately causes a warning when the module probes. Fixes it. Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Link: https://lore.kernel.org/r/20230718172024.67488-1-rgallaispou@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27drm/ttm: check null pointer before accessing when swappingGuchun Chen
Add a check to avoid null pointer dereference as below: [ 90.002283] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 90.002292] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 90.002346] ? exc_general_protection+0x159/0x240 [ 90.002352] ? asm_exc_general_protection+0x26/0x30 [ 90.002357] ? ttm_bo_evict_swapout_allowable+0x322/0x5e0 [ttm] [ 90.002365] ? ttm_bo_evict_swapout_allowable+0x42e/0x5e0 [ttm] [ 90.002373] ttm_bo_swapout+0x134/0x7f0 [ttm] [ 90.002383] ? __pfx_ttm_bo_swapout+0x10/0x10 [ttm] [ 90.002391] ? lock_acquire+0x44d/0x4f0 [ 90.002398] ? ttm_device_swapout+0xa5/0x260 [ttm] [ 90.002412] ? lock_acquired+0x355/0xa00 [ 90.002416] ? do_raw_spin_trylock+0xb6/0x190 [ 90.002421] ? __pfx_lock_acquired+0x10/0x10 [ 90.002426] ? ttm_global_swapout+0x25/0x210 [ttm] [ 90.002442] ttm_device_swapout+0x198/0x260 [ttm] [ 90.002456] ? __pfx_ttm_device_swapout+0x10/0x10 [ttm] [ 90.002472] ttm_global_swapout+0x75/0x210 [ttm] [ 90.002486] ttm_tt_populate+0x187/0x3f0 [ttm] [ 90.002501] ttm_bo_handle_move_mem+0x437/0x590 [ttm] [ 90.002517] ttm_bo_validate+0x275/0x430 [ttm] [ 90.002530] ? __pfx_ttm_bo_validate+0x10/0x10 [ttm] [ 90.002544] ? kasan_save_stack+0x33/0x60 [ 90.002550] ? kasan_set_track+0x25/0x30 [ 90.002554] ? __kasan_kmalloc+0x8f/0xa0 [ 90.002558] ? amdgpu_gtt_mgr_new+0x81/0x420 [amdgpu] [ 90.003023] ? ttm_resource_alloc+0xf6/0x220 [ttm] [ 90.003038] amdgpu_bo_pin_restricted+0x2dd/0x8b0 [amdgpu] [ 90.003210] ? __x64_sys_ioctl+0x131/0x1a0 [ 90.003210] ? do_syscall_64+0x60/0x90 Fixes: a2848d08742c ("drm/ttm: never consider pinned BOs for eviction&swap") Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230724024229.1118444-1-guchun.chen@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
2023-07-27staging: r8712: Fix memory leak in _r8712_init_xmit_priv()Larry Finger
In the above mentioned routine, memory is allocated in several places. If the first succeeds and a later one fails, the routine will leak memory. This patch fixes commit 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel"). A potential memory leak in r8712_xmit_resource_alloc() is also addressed. Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel") Reported-by: syzbot+cf71097ffb6755df8251@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/x/log.txt?x=11ac3fa0a80000 Cc: stable@vger.kernel.org Cc: Nam Cao <namcaov@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reviewed-by: Nam Cao <namcaov@gmail.com> Link: https://lore.kernel.org/r/20230714175417.18578-1-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-27ALSA: hda/realtek: Support ASUS G713PV laptopPavel Asyutchenko
This laptop has CS35L41 amp connected via I2C. With this patch speakers begin to work if the missing _DSD properties are added to ACPI tables. Signed-off-by: Pavel Asyutchenko <svenpavel@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230726223732.20775-1-svenpavel@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-07-27xen: speed up grant-table reclaimDemi Marie Obenour
When a grant entry is still in use by the remote domain, Linux must put it on a deferred list. Normally, this list is very short, because the PV network and block protocols expect the backend to unmap the grant first. However, Qubes OS's GUI protocol is subject to the constraints of the X Window System, and as such winds up with the frontend unmapping the window first. As a result, the list can grow very large, resulting in a massive memory leak and eventual VM freeze. To partially solve this problem, make the number of entries that the VM will attempt to free at each iteration tunable. The default is still 10, but it can be overridden via a module parameter. This is Cc: stable because (when combined with appropriate userspace changes) it fixes a severe performance and stability problem for Qubes OS users. Cc: stable@vger.kernel.org Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230726165354.1252-1-demi@invisiblethingslab.com Signed-off-by: Juergen Gross <jgross@suse.com>
2023-07-26Merge tag 'nf-23-07-26' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Florian Westphal says: ==================== netfilter fixes for net 1. On-demand overlap detection in 'rbtree' set can cause memory leaks. This is broken since 6.2. 2. An earlier fix in 6.4 to address an imbalance in refcounts during transaction error unwinding was incomplete, from Pablo Neira. 3. Disallow adding a rule to a deleted chain, also from Pablo. Broken since 5.9. * tag 'nf-23-07-26' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR netfilter: nft_set_rbtree: fix overlap expiration walk ==================== Link: https://lore.kernel.org/r/20230726152524.26268-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26virtio-net: fix race between set queues and probeJason Wang
A race were found where set_channels could be called after registering but before virtnet_set_queues() in virtnet_probe(). Fixing this by moving the virtnet_set_queues() before netdevice registering. While at it, use _virtnet_set_queues() to avoid holding rtnl as the device is not even registered at that time. Cc: stable@vger.kernel.org Fixes: a220871be66f ("virtio-net: correctly enable multiqueue") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20230725072049.617289-1-jasowang@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64Lin Ma
The nla_for_each_nested parsing in function mqprio_parse_nlattr() does not check the length of the nested attribute. This can lead to an out-of-attribute read and allow a malformed nlattr (e.g., length 0) to be viewed as 8 byte integer and passed to priv->max_rate/min_rate. This patch adds the check based on nla_len() when check the nla_type(), which ensures that the length of these two attribute must equals sizeof(u64). Fixes: 4e8b86c06269 ("mqprio: Introduce new hardware offload mode and shaper in mqprio") Reviewed-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://lore.kernel.org/r/20230725024227.426561-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26splice, net: Fix splice_to_socket() for O_NONBLOCK socketJan Stancek
LTP sendfile07 [1], which expects sendfile() to return EAGAIN when transferring data from regular file to a "full" O_NONBLOCK socket, started failing after commit 2dc334f1a63a ("splice, net: Use sendmsg(MSG_SPLICE_PAGES) rather than ->sendpage()"). sendfile() no longer immediately returns, but now blocks. Removed sock_sendpage() handled this case by setting a MSG_DONTWAIT flag, fix new splice_to_socket() to do the same for O_NONBLOCK sockets. [1] https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/sendfile/sendfile07.c Fixes: 2dc334f1a63a ("splice, net: Use sendmsg(MSG_SPLICE_PAGES) rather than ->sendpage()") Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Jan Stancek <jstancek@redhat.com> Tested-by: Xi Ruoyao <xry111@xry111.site> Link: https://lore.kernel.org/r/023c0e21e595e00b93903a813bc0bfb9a5d7e368.1690219914.git.jstancek@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26net: fec: tx processing does not call XDP APIs if budget is 0Wei Fang
According to the clarification [1] in the latest napi.rst, the tx processing cannot call any XDP (or page pool) APIs if the "budget" is 0. Because NAPI is called with the budget of 0 (such as netpoll) indicates we may be in an IRQ context, however, we cannot use the page pool from IRQ context. [1] https://lore.kernel.org/all/20230720161323.2025379-1-kuba@kernel.org/ Fixes: 20f797399035 ("net: fec: recycle pages for transmitted XDP frames") Signed-off-by: Wei Fang <wei.fang@nxp.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20230725074148.2936402-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26hwmon: (pmbus_core) Fix Deadlock in pmbus_regulator_get_statusGuenter Roeck
pmbus_regulator_get_status() acquires update_lock. pmbus_regulator_get_error_flags() acquires it again, resulting in an immediate deadlock. Call _pmbus_get_flags() from pmbus_regulator_get_status() directly to avoid the problem. Reported-by: Patrick Rudolph <patrick.rudolph@9elements.com> Closes: https://lore.kernel.org/linux-hwmon/b7a3ad85-aab4-4718-a001-1d8b1c0eef36@roeck-us.net/T/#u Cc: Naresh Solanki <Naresh.Solanki@9elements.com> Cc: stable@vger.kernel.org # v6.2+ Fixes: c05f477c4ba3 ("hwmon: (pmbus/core) Implement regulator get_status") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-07-26Merge branch 'mptcp-more-fixes-for-6-5'Jakub Kicinski
Mat Martineau says: ==================== mptcp: More fixes for 6.5 Patch 1: Better detection of ip6tables vs ip6tables-legacy tools for self tests. Fix for 6.4 and newer. Patch 2: Only generate "new listener" event if listen operation succeeds. Fix for 6.2 and newer. ==================== Link: https://lore.kernel.org/r/20230725-send-net-20230725-v1-0-6f60fe7137a9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26mptcp: more accurate NL event generationPaolo Abeni
Currently the mptcp code generate a "new listener" event even if the actual listen() syscall fails. Address the issue moving the event generation call under the successful branch. Cc: stable@vger.kernel.org Fixes: f8c9dfbd875b ("mptcp: add pm listener events") Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230725-send-net-20230725-v1-2-6f60fe7137a9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26selftests: mptcp: join: only check for ip6tables if neededMatthieu Baerts
If 'iptables-legacy' is available, 'ip6tables-legacy' command will be used instead of 'ip6tables'. So no need to look if 'ip6tables' is available in this case. Cc: stable@vger.kernel.org Fixes: 0c4cd3f86a40 ("selftests: mptcp: join: use 'iptables-legacy' if available") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230725-send-net-20230725-v1-1-6f60fe7137a9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26vboxsf: Use flexible arrays for trailing string memberKees Cook
The declaration of struct shfl_string used trailing fake flexible arrays for the string member. This was tripping FORTIFY_SOURCE since commit df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3"). Replace the utf8 and utf16 members with actual flexible arrays, drop the unused ucs2 member, and retriain a 2 byte padding to keep the structure size the same. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Closes: https://lore.kernel.org/lkml/ab3a70e9-60ed-0f13-e3d4-8866eaccc8c1@lwfinger.net/ Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230720151458.never.673-kees@kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2023-07-26net/mlx5: Unregister devlink params in case interface is downShay Drory
Currently, in case an interface is down, mlx5 driver doesn't unregister its devlink params, which leads to this WARN[1]. Fix it by unregistering devlink params in that case as well. [1] [ 295.244769 ] WARNING: CPU: 15 PID: 1 at net/core/devlink.c:9042 devlink_free+0x174/0x1fc [ 295.488379 ] CPU: 15 PID: 1 Comm: shutdown Tainted: G S OE 5.15.0-1017.19.3.g0677e61-bluefield #g0677e61 [ 295.509330 ] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.2.0.12761 Jun 6 2023 [ 295.543096 ] pc : devlink_free+0x174/0x1fc [ 295.551104 ] lr : mlx5_devlink_free+0x18/0x2c [mlx5_core] [ 295.561816 ] sp : ffff80000809b850 [ 295.711155 ] Call trace: [ 295.716030 ] devlink_free+0x174/0x1fc [ 295.723346 ] mlx5_devlink_free+0x18/0x2c [mlx5_core] [ 295.733351 ] mlx5_sf_dev_remove+0x98/0xb0 [mlx5_core] [ 295.743534 ] auxiliary_bus_remove+0x2c/0x50 [ 295.751893 ] __device_release_driver+0x19c/0x280 [ 295.761120 ] device_release_driver+0x34/0x50 [ 295.769649 ] bus_remove_device+0xdc/0x170 [ 295.777656 ] device_del+0x17c/0x3a4 [ 295.784620 ] mlx5_sf_dev_remove+0x28/0xf0 [mlx5_core] [ 295.794800 ] mlx5_sf_dev_table_destroy+0x98/0x110 [mlx5_core] [ 295.806375 ] mlx5_unload+0x34/0xd0 [mlx5_core] [ 295.815339 ] mlx5_unload_one+0x70/0xe4 [mlx5_core] [ 295.824998 ] shutdown+0xb0/0xd8 [mlx5_core] [ 295.833439 ] pci_device_shutdown+0x3c/0xa0 [ 295.841651 ] device_shutdown+0x170/0x340 [ 295.849486 ] __do_sys_reboot+0x1f4/0x2a0 [ 295.857322 ] __arm64_sys_reboot+0x2c/0x40 [ 295.865329 ] invoke_syscall+0x78/0x100 [ 295.872817 ] el0_svc_common.constprop.0+0x54/0x184 [ 295.882392 ] do_el0_svc+0x30/0xac [ 295.889008 ] el0_svc+0x48/0x160 [ 295.895278 ] el0t_64_sync_handler+0xa4/0x130 [ 295.903807 ] el0t_64_sync+0x1a4/0x1a8 [ 295.911120 ] ---[ end trace 4f1d2381d00d9dce ]--- Fixes: fe578cbb2f05 ("net/mlx5: Move devlink registration before mlx5_load") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5: DR, Fix peer domain namespace settingShay Drory
The offending patch is based on the assumption that for PFs, mlx5_get_dev_index() is the same as vhca_id. However, this assumption is wrong in case of DPU (ECPF). Fix it by using vhca_id directly, and switch the array of peers to xarray. Fixes: 6d5b7321d8af ("net/mlx5: DR, handle more than one peer domain") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5: fs_chains: Fix ft prio if ignore_flow_level is not supportedChris Mi
The cited commit sets ft prio to fs_base_prio. But if ignore_flow_level it not supported, ft prio must be set based on tc filter prio. Otherwise, all the ft prio are the same on the same chain. It is invalid if ignore_flow_level is not supported. Fix it by setting ft prio based on tc filter prio and setting fs_base_prio to 0 for fdb. Fixes: 8e80e5648092 ("net/mlx5: fs_chains: Refactor to detach chains from tc usage") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5e: kTLS, Fix protection domain in use syndrome when devlink reloadJianbo Liu
There are DEK objects cached in DEK pool after kTLS is used, and they are freed only in mlx5e_ktls_cleanup(). mlx5e_destroy_mdev_resources() is called in mlx5e_suspend() to free mdev resources, including protection domain (PD). However, PD is still referenced by the cached DEK objects in this case, because profile->cleanup() (and therefore mlx5e_ktls_cleanup()) is called after mlx5e_suspend() during devlink reload. So the following FW syndrome is generated: mlx5_cmd_out_err:803:(pid 12948): DEALLOC_PD(0x801) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0xef0c8a), err(-22) To avoid this syndrome, move DEK pool destruction to mlx5e_ktls_cleanup_tx(), which is called by profile->cleanup_tx(). And move pool creation to mlx5e_ktls_init_tx() for symmetry. Fixes: f741db1a5171 ("net/mlx5e: kTLS, Improve connection rate by using fast update encryption key") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5: Bridge, set debugfs access right to root-onlyVlad Buslov
As suggested during code review set the access rights for bridge 'fdb' debugfs file to root-only. Fixes: 791eb78285e8 ("net/mlx5: Bridge, expose FDB state via debugfs") Reported-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/netdev/20230619120515.5045132a@kernel.org/ Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5e: xsk: Fix crash on regular rq reactivationDragos Tatulea
When the regular rq is reactivated after the XSK socket is closed it could be reading stale cqes which eventually corrupts the rq. This leads to no more traffic being received on the regular rq and a crash on the next close or deactivation of the rq. Kal Cuttler Conely reported this issue as a crash on the release path when the xdpsock sample program is stopped (killed) and restarted in sequence while traffic is running. This patch flushes all cqes when during the rq flush. The cqe flushing is done in the reset state of the rq. mlx5e_rq_to_ready code is moved into the flush function to allow for this. Fixes: 082a9edf12fe ("net/mlx5e: xsk: Flush RQ on XSK activation to save memory") Reported-by: Kal Cutter Conley <kal.conley@dectris.com> Closes: https://lore.kernel.org/xdp-newbies/CAHApi-nUAs4TeFWUDV915CZJo07XVg2Vp63-no7UDfj6wur9nQ@mail.gmail.com Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5e: xsk: Fix invalid buffer access for legacy rqDragos Tatulea
The below crash can be encountered when using xdpsock in rx mode for legacy rq: the buffer gets released in the XDP_REDIRECT path, and then once again in the driver. This fix sets the flag to avoid releasing on the driver side. XSK handling of buffers for legacy rq was relying on the caller to set the skip release flag. But the referenced fix started using fragment counts for pages instead of the skip flag. Crash log: general protection fault, probably for non-canonical address 0xffff8881217e3a: 0000 [#1] SMP CPU: 0 PID: 14 Comm: ksoftirqd/0 Not tainted 6.5.0-rc1+ #31 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:bpf_prog_03b13f331978c78c+0xf/0x28 Code: ... RSP: 0018:ffff88810082fc98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888138404901 RCX: c0ffffc900027cbc RDX: ffffffffa000b514 RSI: 00ffff8881217e32 RDI: ffff888138404901 RBP: ffff88810082fc98 R08: 0000000000091100 R09: 0000000000000006 R10: 0000000000000800 R11: 0000000000000800 R12: ffffc9000027a000 R13: ffff8881217e2dc0 R14: ffff8881217e2910 R15: ffff8881217e2f00 FS: 0000000000000000(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564cb2e2cde0 CR3: 000000010e603004 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? die_addr+0x32/0x80 ? exc_general_protection+0x192/0x390 ? asm_exc_general_protection+0x22/0x30 ? 0xffffffffa000b514 ? bpf_prog_03b13f331978c78c+0xf/0x28 mlx5e_xdp_handle+0x48/0x670 [mlx5_core] ? dev_gro_receive+0x3b5/0x6e0 mlx5e_xsk_skb_from_cqe_linear+0x6e/0x90 [mlx5_core] mlx5e_handle_rx_cqe+0x55/0x100 [mlx5_core] mlx5e_poll_rx_cq+0x87/0x6e0 [mlx5_core] mlx5e_napi_poll+0x45e/0x6b0 [mlx5_core] __napi_poll+0x25/0x1a0 net_rx_action+0x28a/0x300 __do_softirq+0xcd/0x279 ? sort_range+0x20/0x20 run_ksoftirqd+0x1a/0x20 smpboot_thread_fn+0xa2/0x130 kthread+0xc9/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core] ---[ end trace 0000000000000000 ]--- Fixes: 7abd955a58fb ("net/mlx5e: RX, Fix page_pool page fragment tracking for XDP") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5e: Move representor neigh cleanup to profile cleanup_txJianbo Liu
For IP tunnel encapsulation in ECMP (Equal-Cost Multipath) mode, as the flow is duplicated to the peer eswitch, the related neighbour information on the peer uplink representor is created as well. In the cited commit, eswitch devcom unpair is moved to uplink unload API, specifically the profile->cleanup_tx. If there is a encap rule offloaded in ECMP mode, when one eswitch does unpair (because of unloading the driver, for instance), and the peer rule from the peer eswitch is going to be deleted, the use-after-free error is triggered while accessing neigh info, as it is already cleaned up in uplink's profile->disable, which is before its profile->cleanup_tx. To fix this issue, move the neigh cleanup to profile's cleanup_tx callback, and after mlx5e_cleanup_uplink_rep_tx is called. The neigh init is moved to init_tx for symmeter. [ 2453.376299] BUG: KASAN: slab-use-after-free in mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.379125] Read of size 4 at addr ffff888127af9008 by task modprobe/2496 [ 2453.381542] CPU: 7 PID: 2496 Comm: modprobe Tainted: G B 6.4.0-rc7+ #15 [ 2453.383386] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2453.384335] Call Trace: [ 2453.384625] <TASK> [ 2453.384891] dump_stack_lvl+0x33/0x50 [ 2453.385285] print_report+0xc2/0x610 [ 2453.385667] ? __virt_addr_valid+0xb1/0x130 [ 2453.386091] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.386757] kasan_report+0xae/0xe0 [ 2453.387123] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.387798] mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.388465] mlx5e_rep_encap_entry_detach+0xa6/0xe0 [mlx5_core] [ 2453.389111] mlx5e_encap_dealloc+0xa7/0x100 [mlx5_core] [ 2453.389706] mlx5e_tc_tun_encap_dests_unset+0x61/0xb0 [mlx5_core] [ 2453.390361] mlx5_free_flow_attr_actions+0x11e/0x340 [mlx5_core] [ 2453.391015] ? complete_all+0x43/0xd0 [ 2453.391398] ? free_flow_post_acts+0x38/0x120 [mlx5_core] [ 2453.392004] mlx5e_tc_del_fdb_flow+0x4ae/0x690 [mlx5_core] [ 2453.392618] mlx5e_tc_del_fdb_peers_flow+0x308/0x370 [mlx5_core] [ 2453.393276] mlx5e_tc_clean_fdb_peer_flows+0xf5/0x140 [mlx5_core] [ 2453.393925] mlx5_esw_offloads_unpair+0x86/0x540 [mlx5_core] [ 2453.394546] ? mlx5_esw_offloads_set_ns_peer.isra.0+0x180/0x180 [mlx5_core] [ 2453.395268] ? down_write+0xaa/0x100 [ 2453.395652] mlx5_esw_offloads_devcom_event+0x203/0x530 [mlx5_core] [ 2453.396317] mlx5_devcom_send_event+0xbb/0x190 [mlx5_core] [ 2453.396917] mlx5_esw_offloads_devcom_cleanup+0xb0/0xd0 [mlx5_core] [ 2453.397582] mlx5e_tc_esw_cleanup+0x42/0x120 [mlx5_core] [ 2453.398182] mlx5e_rep_tc_cleanup+0x15/0x30 [mlx5_core] [ 2453.398768] mlx5e_cleanup_rep_tx+0x6c/0x80 [mlx5_core] [ 2453.399367] mlx5e_detach_netdev+0xee/0x120 [mlx5_core] [ 2453.399957] mlx5e_netdev_change_profile+0x84/0x170 [mlx5_core] [ 2453.400598] mlx5e_vport_rep_unload+0xe0/0xf0 [mlx5_core] [ 2453.403781] mlx5_eswitch_unregister_vport_reps+0x15e/0x190 [mlx5_core] [ 2453.404479] ? mlx5_eswitch_register_vport_reps+0x200/0x200 [mlx5_core] [ 2453.405170] ? up_write+0x39/0x60 [ 2453.405529] ? kernfs_remove_by_name_ns+0xb7/0xe0 [ 2453.405985] auxiliary_bus_remove+0x2e/0x40 [ 2453.406405] device_release_driver_internal+0x243/0x2d0 [ 2453.406900] ? kobject_put+0x42/0x2d0 [ 2453.407284] bus_remove_device+0x128/0x1d0 [ 2453.407687] device_del+0x240/0x550 [ 2453.408053] ? waiting_for_supplier_show+0xe0/0xe0 [ 2453.408511] ? kobject_put+0xfa/0x2d0 [ 2453.408889] ? __kmem_cache_free+0x14d/0x280 [ 2453.409310] mlx5_rescan_drivers_locked.part.0+0xcd/0x2b0 [mlx5_core] [ 2453.409973] mlx5_unregister_device+0x40/0x50 [mlx5_core] [ 2453.410561] mlx5_uninit_one+0x3d/0x110 [mlx5_core] [ 2453.411111] remove_one+0x89/0x130 [mlx5_core] [ 2453.411628] pci_device_remove+0x59/0xf0 [ 2453.412026] device_release_driver_internal+0x243/0x2d0 [ 2453.412511] ? parse_option_str+0x14/0x90 [ 2453.412915] driver_detach+0x7b/0xf0 [ 2453.413289] bus_remove_driver+0xb5/0x160 [ 2453.413685] pci_unregister_driver+0x3f/0xf0 [ 2453.414104] mlx5_cleanup+0xc/0x20 [mlx5_core] Fixes: 2be5bd42a5bb ("net/mlx5: Handle pairing of E-switch via uplink un/load APIs") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5e: Fix crash moving to switchdev mode when ntuple offload is setAmir Tzin
Moving to switchdev mode with ntuple offload on causes the kernel to crash since fs->arfs is freed during nic profile cleanup flow. Ntuple offload is not supported in switchdev mode and it is already unset by mlx5 fix feature ndo in switchdev mode. Verify fs->arfs is valid before disabling it. trace: [] RIP: 0010:_raw_spin_lock_bh+0x17/0x30 [] arfs_del_rules+0x44/0x1a0 [mlx5_core] [] mlx5e_arfs_disable+0xe/0x20 [mlx5_core] [] mlx5e_handle_feature+0x3d/0xb0 [mlx5_core] [] ? __rtnl_unlock+0x25/0x50 [] mlx5e_set_features+0xfe/0x160 [mlx5_core] [] __netdev_update_features+0x278/0xa50 [] ? netdev_run_todo+0x5e/0x2a0 [] netdev_update_features+0x22/0x70 [] ? _cond_resched+0x15/0x30 [] mlx5e_attach_netdev+0x12a/0x1e0 [mlx5_core] [] mlx5e_netdev_attach_profile+0xa1/0xc0 [mlx5_core] [] mlx5e_netdev_change_profile+0x77/0xe0 [mlx5_core] [] mlx5e_vport_rep_load+0x1ed/0x290 [mlx5_core] [] mlx5_esw_offloads_rep_load+0x88/0xd0 [mlx5_core] [] esw_offloads_load_rep.part.38+0x31/0x50 [mlx5_core] [] esw_offloads_enable+0x6c5/0x710 [mlx5_core] [] mlx5_eswitch_enable_locked+0x1bb/0x290 [mlx5_core] [] mlx5_devlink_eswitch_mode_set+0x14f/0x320 [mlx5_core] [] devlink_nl_cmd_eswitch_set_doit+0x94/0x120 [] genl_family_rcv_msg_doit.isra.17+0x113/0x150 [] genl_family_rcv_msg+0xb7/0x170 [] ? devlink_nl_cmd_port_split_doit+0x100/0x100 [] genl_rcv_msg+0x47/0xa0 [] ? genl_family_rcv_msg+0x170/0x170 [] netlink_rcv_skb+0x4c/0x130 [] genl_rcv+0x24/0x40 [] netlink_unicast+0x19a/0x230 [] netlink_sendmsg+0x204/0x3d0 [] sock_sendmsg+0x50/0x60 Fixes: 90b22b9bcd24 ("net/mlx5e: Disable Rx ntuple offload for uplink representor") Signed-off-by: Amir Tzin <amirtz@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5e: Don't hold encap tbl lock if there is no encap actionChris Mi
The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9fa7ccf ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5: Honor user input for migratable port fn attrShay Drory
Currently, whenever a user is setting migratable port fn attr, the driver is always turn migratable capability on. Fix it by honor the user input Fixes: e5b9642a33be ("net/mlx5: E-Switch, Implement devlink port function cmds to control migratable") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5e: fix return value check in mlx5e_ipsec_remove_trailer()Yuanjun Gong
mlx5e_ipsec_remove_trailer() should return an error code if function pskb_trim() returns an unexpected value. Fixes: 2ac9cfe78223 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path") Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5: fix potential memory leak in mlx5e_init_rep_rxZhengchao Shao
The memory pointed to by the priv->rx_res pointer is not freed in the error path of mlx5e_init_rep_rx, which can lead to a memory leak. Fix by freeing the memory in the error path, thereby making the error path identical to mlx5e_cleanup_rep_rx(). Fixes: af8bbf730068 ("net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5: DR, fix memory leak in mlx5dr_cmd_create_reformat_ctxZhengchao Shao
when mlx5_cmd_exec failed in mlx5dr_cmd_create_reformat_ctx, the memory pointed by 'in' is not released, which will cause memory leak. Move memory release after mlx5_cmd_exec. Fixes: 1d9186476e12 ("net/mlx5: DR, Add direct rule command utilities") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5e: fix double free in macsec_fs_tx_create_crypto_table_groupsZhengchao Shao
In function macsec_fs_tx_create_crypto_table_groups(), when the ft->g memory is successfully allocated but the 'in' memory fails to be allocated, the memory pointed to by ft->g is released once. And in function macsec_fs_tx_create(), macsec_fs_tx_destroy() is called to release the memory pointed to by ft->g again. This will cause double free problem. Fixes: e467b283ffd5 ("net/mlx5e: Add MACsec TX steering rules") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26cifs: add missing return value check for cifs_sb_tlinkShyam Prasad N
Whenever a tlink is obtained by cifs_sb_tlink, we need to check that the tlink returned is not an error. It was missing with the last change here. Fixes: b3edef6b9cd0 ("cifs: allow dumping keys for directories too") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-07-26Merge branch 'tools-ynl-gen-fix-parse-multi-attr-enum-attribute'Jakub Kicinski
Arkadiusz Kubalewski says: ==================== tools: ynl-gen: fix parse multi-attr enum attribute Fix the issues with parsing enums in ynl.py script. ==================== Link: https://lore.kernel.org/r/20230725101642.267248-1-arkadiusz.kubalewski@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26tools: ynl-gen: fix parse multi-attr enum attributeArkadiusz Kubalewski
When attribute is enum type and marked as multi-attr, the netlink respond is not parsed, fails with stack trace: Traceback (most recent call last): File "/net-next/tools/net/ynl/./test.py", line 520, in <module> main() File "/net-next/tools/net/ynl/./test.py", line 488, in main dplls=dplls_get(282574471561216) File "/net-next/tools/net/ynl/./test.py", line 48, in dplls_get reply=act(args) File "/net-next/tools/net/ynl/./test.py", line 41, in act reply = ynl.dump(args.dump, attrs) File "/net-next/tools/net/ynl/lib/ynl.py", line 598, in dump return self._op(method, vals, dump=True) File "/net-next/tools/net/ynl/lib/ynl.py", line 584, in _op rsp_msg = self._decode(gm.raw_attrs, op.attr_set.name) File "/net-next/tools/net/ynl/lib/ynl.py", line 451, in _decode self._decode_enum(rsp, attr_spec) File "/net-next/tools/net/ynl/lib/ynl.py", line 408, in _decode_enum value = enum.entries_by_val[raw].name TypeError: unhashable type: 'list' error: 1 Redesign _decode_enum(..) to take a enum int value and translate it to either a bitmask or enum name as expected. Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20230725101642.267248-3-arkadiusz.kubalewski@intel.com Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26tools: ynl-gen: fix enum index in _decode_enum(..)Arkadiusz Kubalewski
Remove wrong index adjustment, which is leftover from adding support for sparse enums. enum.entries_by_val() function shall not subtract the start-value, as it is indexed with real enum value. Fixes: c311aaa74ca1 ("tools: ynl: fix enum-as-flags in the generic CLI") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20230725101642.267248-2-arkadiusz.kubalewski@intel.com Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26Merge tag 'clk-meson-fixes-v6.5-1' of https://github.com/BayLibre/clk-meson ↵Stephen Boyd
into clk-fixes Pull an Amlogic clk driver fix from Jerome Brunet: - Fix PLL scheduling while atomic following a1 locking sequence update * tag 'clk-meson-fixes-v6.5-1' of https://github.com/BayLibre/clk-meson: clk: meson: change usleep_range() to udelay() for atomic context
2023-07-26Merge tag 'platform-drivers-x86-v6.5-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Misc small fixes and hw-id additions" * tag 'platform-drivers-x86-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: huawei-wmi: Silence ambient light sensor platform/x86: msi-laptop: Fix rfkill out-of-sync on MSI Wind U100 platform/x86: asus-wmi: Fix setting RGB mode on some TUF laptops platform/x86: think-lmi: Use kfree_sensitive instead of kfree platform/x86/intel/hid: Add HP Dragonfly G2 to VGBS DMI quirks platform/x86: intel: hid: Always call BTNL ACPI method platform/x86/amd/pmf: Notify OS power slider update platform/x86/amd/pmf: reduce verbosity of apmf_get_system_params platform/x86: serial-multi-instantiate: Auto detect IRQ resource for CSC3551 platform/x86/amd: pmc: Use release_mem_region() to undo request_mem_region_muxed() platform/x86: touchscreen_dmi.c: small changes for Archos 101 Cesium Educ tablet
2023-07-26Merge tag '6.5-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull ksmbd server fixes from Steve French: - fixes for two possible out of bounds access (in negotiate, and in decrypt msg) - fix unsigned compared to zero warning - fix path lookup crossing a mountpoint - fix case when first compound request is a tree connect - fix memory leak if reads are compounded * tag '6.5-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: fix out of bounds in init_smb2_rsp_hdr() ksmbd: no response from compound read ksmbd: validate session id and tree id in compound request ksmbd: fix out of bounds in smb3_decrypt_req() ksmbd: check if a mount point is crossed during path lookup ksmbd: Fix unsigned expression compared with zero
2023-07-26ALSA: usb-audio: Update for native DSD support quirksJussi Laako
Maintenance patch for native DSD support. Remove incorrect T+A device quirks. Move set of device quirks to vendor quirks. Add set of missing device and vendor quirks. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Link: https://lore.kernel.org/r/20230726165645.404311-1-jussi@sonarnerd.net Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-07-26mm: suppress mm fault logging if fatal signal already pendingLinus Torvalds
Commit eda0047296a1 ("mm: make the page fault mmap locking killable") intentionally made it much easier to trigger the "page fault fails because a fatal signal is pending" situation, by having the mmap locking fail early in that case. We have long aborted page faults in other fatal cases when the actual IO for a page is interrupted by SIGKILL - which is particularly useful for the traditional case of NFS hanging due to network issues, but local filesystems could cause it too if you happened to get the SIGKILL while waiting for a page to be faulted in (eg lock_folio_maybe_drop_mmap()). So aborting the page fault wasn't a new condition - but it now triggers earlier, before we even get to 'handle_mm_fault()'. And as a result the error doesn't go through our 'fault_signal_pending()' logic, and doesn't get filtered away there. Normally you'd never even notice, because if a fatal signal is pending, the new SIGSEGV we send ends up being ignored anyway. But it turns out that there is one very noticeable exception: if you enable 'show_unhandled_signals', the aborted page fault will be logged in the kernel messages, and you'll get a scary line looking something like this in your logs: pverados[2183248]: segfault at 55e5a00f9ae0 ip 000055e5a00f9ae0 sp 00007ffc0720bea8 error 14 in perl[55e5a00d4000+195000] likely on CPU 10 (core 4, socket 0) which is rather misleading. It's not really a segfault at all, it's just "the thread was killed before the page fault completed, so we aborted the page fault". Fix this by just making it clear that a pending fatal signal means that any new signal coming in after that is implicitly handled. This will avoid the misleading logging, since now the signal isn't 'unhandled' any more. Reported-and-tested-by: Fiona Ebner <f.ebner@proxmox.com> Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com> Link: https://lore.kernel.org/lkml/8d063a26-43f5-0bb7-3203-c6a04dc159f8@proxmox.com/ Acked-by: Oleg Nesterov <oleg@redhat.com> Fixes: eda0047296a1 ("mm: make the page fault mmap locking killable") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-26drm/msm: Disallow submit with fence id 0Rob Clark
A fence id of zero is expected to be invalid, and is not removed from the fence_idr table. If userspace is requesting to specify the fence id with the FENCE_SN_IN flag, we need to reject a zero fence id value. Fixes: 17154addc5c1 ("drm/msm: Add MSM_SUBMIT_FENCE_SN_IN") Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/549180/
2023-07-26arm64/sme: Set new vector length before reallocatingMark Brown
As part of fixing the allocation of the buffer for SVE state when changing SME vector length we introduced an immediate reallocation of the SVE state, this is also done when changing the SVE vector length for consistency. Unfortunately this reallocation is done prior to writing the new vector length to the task struct, meaning the allocation is done with the old vector length and can lead to memory corruption due to an undersized buffer being used. Move the update of the vector length before the allocation to ensure that the new vector length is taken into account. For some reason this isn't triggering any problems when running tests on the arm64 fixes branch (even after repeated tries) but is triggering issues very often after merge into mainline. Fixes: d4d5be94a878 ("arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230726-arm64-fix-sme-fix-v1-1-7752ec58af27@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-07-26arm64/fpsimd: Don't flush SME register hardware state along with threadMark Brown
We recently changed the fpsimd thread flush to flush the physical SME state as well as the thread state for the current thread. Unfortunately this leads to intermittent corruption in interaction with the lazy FPSIMD register switching. When under heavy load such as can be triggered by the startup phase of fp-stress it is possible that the current thread may not be scheduled prior to returning to userspace, and indeed we may end up returning to the last thread that was scheduled on the PE without ever exiting the kernel to any other task. If that happens then we will not reload the register state from memory, leading to loss of any SME register state. Since this was purely an attempt to defensively close off potential problems revert the change. Fixes: af3215fd0230 ("arm64/fpsimd: Exit streaming mode when flushing tasks") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230724-arm64-dont-flush-smstate-v1-1-9a8b637ace6c@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-07-26KVM: arm64: fix __kvm_host_psci_cpu_entry() prototypeArnd Bergmann
The kvm_host_psci_cpu_entry() function was renamed in order to add a wrapper around it, but the prototype did not change, so now the missing-prototype warning came back in W=1 builds: arch/arm64/kvm/hyp/nvhe/psci-relay.c:203:28: error: no previous prototype for function '__kvm_host_psci_cpu_entry' [-Werror,-Wmissing-prototypes] asmlinkage void __noreturn __kvm_host_psci_cpu_entry(bool is_cpu_on) Fixes: dcf89d1111995 ("KVM: arm64: Add missing BTI instructions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230724121850.1386668-1-arnd@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-07-26KVM: arm64: Fix resetting SME trap values on reset for (h)VHEFuad Tabba
Ensure that SME traps are disabled for (h)VHE when getting the reset value for the architectural feature control register. Fixes: 75c76ab5a641 ("KVM: arm64: Rework CPTR_EL2 programming for HVHE configuration") Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230724123829.2929609-9-tabba@google.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-07-26KVM: arm64: Fix resetting SVE trap values on reset for hVHEFuad Tabba
Ensure that SVE traps are disabled for hVHE, if the FPSIMD state isn't owned by the guest, when getting the reset value for the architectural feature control register. Fixes: 75c76ab5a641 ("KVM: arm64: Rework CPTR_EL2 programming for HVHE configuration") Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230724123829.2929609-8-tabba@google.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-07-26KVM: arm64: Use the appropriate feature trap register when activating trapsFuad Tabba
Instead of writing directly to cptr_el2, use the helper that selects which feature trap register to write to based on the KVM mode. Fixes: 75c76ab5a641 ("KVM: arm64: Rework CPTR_EL2 programming for HVHE configuration") Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230724123829.2929609-7-tabba@google.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-07-26KVM: arm64: Helper to write to appropriate feature trap register based on modeFuad Tabba
Factor out the code that decides whether to write to the feature trap registers, CPTR_EL2 or CPACR_EL1, based on the KVM mode, i.e., (h)VHE or nVHE. This function will be used in the subsequent patch. No functional change intended. Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230724123829.2929609-6-tabba@google.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-07-26KVM: arm64: Disable SME traps for (h)VHE at setupFuad Tabba
Ensure that SME traps are disabled for (h)VHE when setting up EL2, as they are for nVHE. Signed-off-by: Fuad Tabba <tabba@google.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230724123829.2929609-5-tabba@google.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
generated by cgit (git 2.34.1) at 2025-09-12 21:31:54 +0000