| Age | Commit message (Collapse) | Author |
|---|
|
With:
f8a66d608a3e ("x86,bugs: Unconditionally allow spectre_v2=retpoline,amd")
it became possible to enable the LFENCE "retpoline" on Intel. However,
Intel doesn't recommend it, as it has some weaknesses compared to
retpoline.
Now AMD doesn't recommend it either.
It can still be left available as a cmdline option. It's faster than
retpoline but is weaker in certain scenarios -- particularly SMT, but
even non-SMT may be vulnerable in some cases.
So just unconditionally warn if the user requests it on the cmdline.
[ bp: Massage commit message. ]
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
This PHY doesn't support a link-up interrupt source. If aneg is enabled
we use the "aneg complete" interrupt for this purpose, but if aneg is
disabled link-up isn't signaled currently.
According to a vendor driver there's an additional "energy detect"
interrupt source that can be used to signal link-up if aneg is disabled.
We can safely ignore this interrupt source if aneg is enabled.
This patch was tested on a TX3 Mini TV box with S905W (even though
boot message says it's a S905D).
This issue has been existing longer, but due to changes in phylib and
the driver the patch applies only from the commit marked as fixed.
Fixes: 84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/04cac530-ea1b-850e-6cfa-144a55c4d75d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull block fix from Jens Axboe:
"Just a small UAF fix for blktrace"
* tag 'block-5.17-2022-03-04' of git://git.kernel.dk/linux-block:
blktrace: fix use after free for struct blk_trace
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- Fixes for a handful of KASAN-related crashes.
- A fix to avoid a crash during boot for SPARSEMEM &&
!SPARSEMEM_VMEMMAP configurations.
- A fix to stop reporting some incorrect errors under DEBUG_VIRTUAL.
- A fix for the K210's device tree to properly populate the interrupt
map, so hart1 will get interrupts again.
* tag 'riscv-for-linus-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: k210: fix broken IRQs on hart1
riscv: Fix kasan pud population
riscv: Move high_memory initialization to setup_bootmem
riscv: Fix config KASAN && DEBUG_VIRTUAL
riscv: Fix DEBUG_VIRTUAL false warnings
riscv: Fix config KASAN && SPARSEMEM && !SPARSE_VMEMMAP
riscv: Fix is_linear_mapping with recent move of KASAN region
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix a double list_add() in Intel VT-d code
- Add missing put_device() in Tegra SMMU driver
- Two AMD IOMMU fixes:
- Memory leak in IO page-table freeing code
- Add missing recovery from event-log overflow
* tag 'iommu-fixes-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/tegra-smmu: Fix missing put_device() call in tegra_smmu_find
iommu/vt-d: Fix double list_add when enabling VMD in scalable mode
iommu/amd: Fix I/O page table memory leak
iommu/amd: Recover from event log overflow
|
|
Use the helpers instead of open coding them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use memcpy_from_bvec instead of open coding the logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the proper helper instead of open coding the copy.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220303111905.321089-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20220303111905.321089-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix NULL pointer dereference in the thermal netlink interface (Nicolas
Cavallari)"
* tag 'thermal-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix TZ_GET_TRIP NULL pointer dereference
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Hopefully the last PR for 5.17, including just a few small changes:
an additional fix for ASoC ops boundary check and other minor
device-specific fixes"
* tag 'sound-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: intel_hdmi: Fix reference to PCM buffer address
ASoC: cs4265: Fix the duplicated control name
ASoC: ops: Shift tested values in snd_soc_put_volsw() by +min
|
|
Pull drm fixes from Dave Airlie:
"Things are quieting down as expected, just a small set of fixes, i915,
exynos, amdgpu, vrr, bridge and hdlcd. Nothing scary at all.
i915:
- Fix GuC SLPC unset command
- Fix misidentification of some Apple MacBook Pro laptops as Jasper Lake
amdgpu:
- Suspend regression fix
exynos:
- irq handling fixes
- Fix two regressions to TE-gpio handling
arm/hdlcd:
- Select DRM_GEM_CMEA_HELPER for HDLCD
bridge:
- ti-sn65dsi86: Properly undo autosuspend
vrr:
- Fix potential NULL-pointer deref"
* tag 'drm-fixes-2022-03-04' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: fix suspend/resume hang regression
drm/vrr: Set VRR capable prop only if it is attached to connector
drm/arm: arm hdlcd select DRM_GEM_CMA_HELPER
drm/bridge: ti-sn65dsi86: Properly undo autosuspend
drm/i915: s/JSP2/ICP2/ PCH
drm/i915/guc/slpc: Correct the param count for unset param
drm/exynos: Search for TE-gpio in DSI panel's node
drm/exynos: Don't fail if no TE-gpio is defined for DSI driver
drm/exynos: gsc: Use platform_get_irq() to get the interrupt
drm/exynos/fimc: Use platform_get_irq() to get the interrupt
drm/exynos/exynos_drm_fimd: Use platform_get_irq_byname() to get the interrupt
drm/exynos: mixer: Use platform_get_irq() to get the interrupt
drm/exynos/exynos7_drm_decon: Use platform_get_irq_byname() to get the interrupt
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"These two fixes should fix the issues seen on the OrangePi, first we
needed the correct offset when calling pinctrl_gpio_direction(), and
fixing that made a lockdep issue explode in our face. Both now fixed"
* tag 'pinctrl-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunxi: Use unique lockdep classes for IRQs
pinctrl-sunxi: sunxi_pinctrl_gpio_direction_in/output: use correct offset
|
|
Add a Sapphire Rapids Xeon C6 optimization, similar to what we have for Sky Lake
Xeon: if package C6 is disabled, adjust C6 exit latency and target residency to
match core C6 values, instead of using the default package C6 values.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On Sapphire Rapids Xeon (SPR) the C1 and C1E states are basically mutually
exclusive - only one of them can be enabled. By default, 'intel_idle' driver
enables C1 and disables C1E. However, some users prefer to use C1E instead of
C1, because it saves more energy.
This patch adds a new module parameter ('preferred_cstates') for enabling C1E
and disabling C1. Here is the idea behind it.
1. This option has effect only for "mutually exclusive" C-states like C1 and
C1E on SPR.
2. It does not have any effect on independent C-states, which do not require
other C-states to be disabled (most states on most platforms as of today).
3. For mutually exclusive C-states, the 'intel_idle' driver always has a
reasonable default, such as enabling C1 on SPR by default. On other
platforms, the default may be different.
4. Users can override the default using the 'preferred_cstates' parameter.
5. The parameter accepts the preferred C-states bit-mask, similarly to the
existing 'states_off' parameter.
6. This parameter is not limited to C1/C1E, and leaves room for supporting
other mutually exclusive C-states, if they come in the future.
Today 'intel_idle' can only be compiled-in, which means that on SPR, in order
to disable C1 and enable C1E, users should boot with the following kernel
argument: intel_idle.preferred_cstates=4
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add Sapphire Rapids Xeon support.
Up until very recently, the C1 and C1E C-states were independent, but this
has changed in some new chips, including Sapphire Rapids Xeon (SPR). In these
chips the C1 and C1E states cannot be enabled at the same time. The "C1E
promotion" bit in 'MSR_IA32_POWER_CTL' also has its semantics changed a bit.
Here are the C1, C1E, and "C1E promotion" bit rules on Xeons before SPR.
1. If C1E promotion bit is disabled.
a. C1 requests end up with C1 C-state.
b. C1E requests end up with C1E C-state.
2. If C1E promotion bit is enabled.
a. C1 requests end up with C1E C-state.
b. C1E requests end up with C1E C-state.
Here are the C1, C1E, and "C1E promotion" bit rules on Sapphire Rapids Xeon.
1. If C1E promotion bit is disabled.
a. C1 requests end up with C1 C-state.
b. C1E requests end up with C1 C-state.
2. If C1E promotion bit is enabled.
a. C1 requests end up with C1E C-state.
b. C1E requests end up with C1E C-state.
Before SPR Xeon, the 'intel_idle' driver was disabling C1E promotion and was
exposing C1 and C1E as independent C-states. But on SPR, C1 and C1E cannot be
enabled at the same time.
This patch adds both C1 and C1E states. However, C1E is marked as with the
"CPUIDLE_FLAG_UNUSABLE" flag, which means that in won't be registered by
default. The C1E promotion bit will be cleared, which means that by default
only C1 and C6 will be registered on SPR.
The next patch will add an option for enabling C1E and disabling C1 on SPR.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
__setup() handlers should generally return 1 to indicate that the
boot options have been handled.
Using invalid option values causes the entire kernel boot option
string to be reported as Unknown and added to init's environment
strings, polluting it.
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc6
kprobe_event=p,syscall_any,$arg1 trace_options=quiet
trace_clock=jiffies", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc6
kprobe_event=p,syscall_any,$arg1
trace_options=quiet
trace_clock=jiffies
Return 1 from the __setup() handlers so that init's environment is not
polluted with kernel boot options.
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Link: https://lkml.kernel.org/r/20220303031744.32356-1-rdunlap@infradead.org
Cc: stable@vger.kernel.org
Fixes: 7bcfaf54f591 ("tracing: Add trace_options kernel command line parameter")
Fixes: e1e232ca6b8f ("tracing: Add trace_clock=<clock> kernel parameter")
Fixes: 970988e19eb0 ("tracing/kprobe: Add kprobe_event= boot parameter")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
syzkaller was recently triggering an oversized kvmalloc() warning via
xdp_umem_create().
The triggered warning was added back in 7661809d493b ("mm: don't allow
oversized kvmalloc() calls"). The rationale for the warning for huge
kvmalloc sizes was as a reaction to a security bug where the size was
more than UINT_MAX but not everything was prepared to handle unsigned
long sizes.
Anyway, the AF_XDP related call trace from this syzkaller report was:
kvmalloc include/linux/mm.h:806 [inline]
kvmalloc_array include/linux/mm.h:824 [inline]
kvcalloc include/linux/mm.h:829 [inline]
xdp_umem_pin_pages net/xdp/xdp_umem.c:102 [inline]
xdp_umem_reg net/xdp/xdp_umem.c:219 [inline]
xdp_umem_create+0x6a5/0xf00 net/xdp/xdp_umem.c:252
xsk_setsockopt+0x604/0x790 net/xdp/xsk.c:1068
__sys_setsockopt+0x1fd/0x4e0 net/socket.c:2176
__do_sys_setsockopt net/socket.c:2187 [inline]
__se_sys_setsockopt net/socket.c:2184 [inline]
__x64_sys_setsockopt+0xb5/0x150 net/socket.c:2184
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Björn mentioned that requests for >2GB allocation can still be valid:
The structure that is being allocated is the page-pinning accounting.
AF_XDP has an internal limit of U32_MAX pages, which is *a lot*, but
still fewer than what memcg allows (PAGE_COUNTER_MAX is a LONG_MAX/
PAGE_SIZE on 64 bit systems). [...]
I could just change from U32_MAX to INT_MAX, but as I stated earlier
that has a hacky feeling to it. [...] From my perspective, the code
isn't broken, with the memcg limits in consideration. [...]
Linus says:
[...] Pretty much every time this has come up, the kernel warning has
shown that yes, the code was broken and there really wasn't a reason
for doing allocations that big.
Of course, some people would be perfectly fine with the allocation
failing, they just don't want the warning. I didn't want __GFP_NOWARN
to shut it up originally because I wanted people to see all those
cases, but these days I think we can just say "yeah, people can shut
it up explicitly by saying 'go ahead and fail this allocation, don't
warn about it'".
So enough time has passed that by now I'd certainly be ok with [it].
Thus allow call-sites to silence such userspace triggered splats if the
allocation requests have __GFP_NOWARN. For xdp_umem_pin_pages()'s call
to kvcalloc() this is already the case, so nothing else needed there.
Fixes: 7661809d493b ("mm: don't allow oversized kvmalloc() calls")
Reported-by: syzbot+11421fbbff99b989670e@syzkaller.appspotmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+11421fbbff99b989670e@syzkaller.appspotmail.com
Cc: Björn Töpel <bjorn@kernel.org>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Link: https://lore.kernel.org/bpf/CAJ+HfNhyfsT5cS_U9EC213ducHs9k9zNxX9+abqC0kTrPbQ0gg@mail.gmail.com
Link: https://lore.kernel.org/bpf/20211201202905.b9892171e3f5b9a60f9da251@linux-foundation.org
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Ackd-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
pm_runtime_dont_use_autosuspend()
The PM Runtime docs say:
Drivers in ->remove() callback should undo the runtime PM changes done
in ->probe(). Usually this means calling pm_runtime_disable(),
pm_runtime_dont_use_autosuspend() etc.
From grepping code, it's clear that many people aren't aware of the
need to call pm_runtime_dont_use_autosuspend().
When brainstorming solutions, one idea that came up was to leverage
the new-ish devm_pm_runtime_enable() function. The idea here is that:
* When the devm action is called we know that the driver is being
removed. It's the perfect time to undo the use_autosuspend.
* The code of pm_runtime_dont_use_autosuspend() already handles the
case of being called when autosuspend wasn't enabled.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix following 'make htmldocs' warnings:
./Documentation/admin-guide/perf/hisi-pcie-pmu.rst: WARNING:
document isn't included in any toctree
Fixes: c8602008e247 ("docs: perf: Add description for HiSilicon PCIe PMU driver")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20220228031700.1669086-1-wanjiabing@vivo.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Unfair rwsem should be used when blk-cg is on. Otherwise, there is regression.
FYI, we noticed a -26.7% regression of aim7.jobs-per-min due to commit:
commit: e4544b63a7ee49e7fbebf35ece0a6acd3b9617ae ("f2fs: move f2fs to use reader-unfair rwsems")
https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git master
in testcase: aim7
on test machine: 88 threads 2 sockets Intel(R) Xeon(R) Gold 6238M CPU @ 2.10GHz with 128G memory
with following parameters:
disk: 4BRD_12G
md: RAID0
fs: f2fs
test: sync_disk_rw
load: 100
cpufreq_governor: performance
ucode: 0x500320a
test-description: AIM7 is a traditional UNIX system level benchmark suite which is used to test and measure the performance of multiuser system.
test-url: https://sourceforge.net/projects/aimbench/files/aim-suite7/
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
If one read IO is always failing, we can fall into an infinite loop in
f2fs_sync_dirty_inodes. This happens during xfstests/generic/475.
[ 142.803335] Buffer I/O error on dev dm-1, logical block 8388592, async page read
...
[ 382.887210] submit_bio_noacct+0xdd/0x2a0
[ 382.887213] submit_bio+0x80/0x110
[ 382.887223] __submit_bio+0x4d/0x300 [f2fs]
[ 382.887282] f2fs_submit_page_bio+0x125/0x200 [f2fs]
[ 382.887299] __get_meta_page+0xc9/0x280 [f2fs]
[ 382.887315] f2fs_get_meta_page+0x13/0x20 [f2fs]
[ 382.887331] f2fs_get_node_info+0x317/0x3c0 [f2fs]
[ 382.887350] f2fs_do_write_data_page+0x327/0x6f0 [f2fs]
[ 382.887367] f2fs_write_single_data_page+0x5b7/0x960 [f2fs]
[ 382.887386] f2fs_write_cache_pages+0x302/0x890 [f2fs]
[ 382.887405] ? preempt_count_add+0x7a/0xc0
[ 382.887408] f2fs_write_data_pages+0xfd/0x320 [f2fs]
[ 382.887425] ? _raw_spin_unlock+0x1a/0x30
[ 382.887428] do_writepages+0xd3/0x1d0
[ 382.887432] filemap_fdatawrite_wbc+0x69/0x90
[ 382.887434] filemap_fdatawrite+0x50/0x70
[ 382.887437] f2fs_sync_dirty_inodes+0xa4/0x270 [f2fs]
[ 382.887453] f2fs_write_checkpoint+0x189/0x1640 [f2fs]
[ 382.887469] ? schedule_timeout+0x114/0x150
[ 382.887471] ? ttwu_do_activate+0x6d/0xb0
[ 382.887473] ? preempt_count_add+0x7a/0xc0
[ 382.887476] kill_f2fs_super+0xca/0x100 [f2fs]
[ 382.887491] deactivate_locked_super+0x35/0xa0
[ 382.887494] deactivate_super+0x40/0x50
[ 382.887497] cleanup_mnt+0x139/0x190
[ 382.887499] __cleanup_mnt+0x12/0x20
[ 382.887501] task_work_run+0x64/0xa0
[ 382.887505] exit_to_user_mode_prepare+0x1b7/0x1c0
[ 382.887508] syscall_exit_to_user_mode+0x27/0x50
[ 382.887510] do_syscall_64+0x48/0xc0
[ 382.887513] entry_SYSCALL_64_after_hwframe+0x44/0xae
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
With PREEMPT_RT the _bh() version of a spinlock leaves preemption
enabled, align the doc to say that instead of the opposite.
Reported-by: Leah Leshchinsky <lleshchi@redhat.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20220224212312.2601153-1-ahalaney@redhat.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Due to some chips may use different registers and offset, provide
a set trigger type call back and add one for old controller.
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220225055207.1048-4-qianggui.song@amlogic.com
|
|
Current meson gpio irqchip driver only support 8 channels for gpio irq
line, later chips may have more then 8 channels, so need to modify code
to support more.
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220225055207.1048-3-qianggui.song@amlogic.com
|
|
Update dt-binding document for GPIO interrupt controller of Meson-S4 SoCs
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220225055207.1048-2-qianggui.song@amlogic.com
|
|
This fixes the following smatch warnings:
drivers/vdpa/vdpa_user/iova_domain.c:305 vduse_domain_alloc_iova() warn: should 'iova_pfn << shift' be a 64 bit type?
Fixes: 8c773d53fb7b ("vduse: Implement an MMU-based software IOTLB")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20220121083940.102-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
When control vq receives a VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command
request from the driver, presently there is no validation against the
number of queue pairs to configure, or even if multiqueue had been
negotiated or not is unverified. This may lead to kernel panic due to
uninitialized resource for the queues were there any bogus request
sent down by untrusted driver. Tie up the loose ends there.
Fixes: 52893733f2c5 ("vdpa/mlx5: Add multiqueue support")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Link: https://lore.kernel.org/r/1642206481-30721-4-git-send-email-si-wei.liu@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Per VIRTIO v1.1 specification, section 5.1.3.1 Feature bit requirements:
"VIRTIO_NET_F_MQ Requires VIRTIO_NET_F_CTRL_VQ".
There's assumption in the mlx5_vdpa multiqueue code that MQ must come
together with CTRL_VQ. However, there's nowhere in the upper layer to
guarantee this assumption would hold. Were there an untrusted driver
sending down MQ without CTRL_VQ, it would compromise various spots for
e.g. is_index_valid() and is_ctrl_vq_idx(). Although this doesn't end
up with immediate panic or security loophole as of today's code, the
chance for this to be taken advantage of due to future code change is
not zero.
Harden the crispy assumption by failing the set_driver_features() call
when seeing (MQ && !CTRL_VQ). For that end, verify_min_features() is
renamed to verify_driver_features() to reflect the fact that it now does
more than just validate the minimum features. verify_driver_features()
is now used to accommodate various checks against the driver features
for set_driver_features().
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Link: https://lore.kernel.org/r/1642206481-30721-3-git-send-email-si-wei.liu@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
No functional change introduced. vdpa bus driver such as virtio_vdpa
or vhost_vdpa is not supposed to take care of the locking for core
by its own. The locked API vdpa_set_features should suffice the
bus driver's need.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/1642206481-30721-2-git-send-email-si-wei.liu@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
* irq/misc-5.18:
: .
: Misc irq chip changes for 5.18
:
: - GICv3: Relax ordering of previous stores to only include the ISH domain
:
: - nvic: Unmap MMIo region on probe failure
:
: - xilinx: Switch to GENERIC_IRQ_MULTI_HANDLER when used on microblaze
: .
irqchip/xilinx: Switch to GENERIC_IRQ_MULTI_HANDLER
irqchip/nvic: Release nvic_base upon failure
irqchip/gic-v3: Use dsb(ishst) to order writes with ICC_SGI1R_EL1 accesses
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* irq/plic-cleanups:
: .
: SiFive PLIC cleanups from Niklas Cassel:
:
: - Clarify some of the namings in the driver
:
: - Make sure S-mode interrupts are disabled when running in M-mode
: .
irqchip/sifive-plic: Disable S-mode IRQs if running in M-mode
irqchip/sifive-plic: Improve naming scheme for per context offsets
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Register the Xilinx driver as the root interrupt controller using
the GENERIC_IRQ_MULTI_HANDLER API, instead of the arch-specific hack.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Stefan Asserhall <stefan.asserhall@xilinx.com>
[maz: repainted commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/e6c6595a81f662bf839cee3109d0fa58a596ea47.1646380284.git.michal.simek@xilinx.com
|
|
Some users recently reported that MariaDB was getting a read corruption
when using io_uring on top of btrfs. This started to happen in 5.16,
after commit 51bd9563b6783d ("btrfs: fix deadlock due to page faults
during direct IO reads and writes"). That changed btrfs to use the new
iomap flag IOMAP_DIO_PARTIAL and to disable page faults before calling
iomap_dio_rw(). This was necessary to fix deadlocks when the iovector
corresponds to a memory mapped file region. That type of scenario is
exercised by test case generic/647 from fstests.
For this MariaDB scenario, we attempt to read 16K from file offset X
using IOCB_NOWAIT and io_uring. In that range we have 4 extents, each
with a size of 4K, and what happens is the following:
1) btrfs_direct_read() disables page faults and calls iomap_dio_rw();
2) iomap creates a struct iomap_dio object, its reference count is
initialized to 1 and its ->size field is initialized to 0;
3) iomap calls btrfs_dio_iomap_begin() with file offset X, which finds
the first 4K extent, and setups an iomap for this extent consisting
of a single page;
4) At iomap_dio_bio_iter(), we are able to access the first page of the
buffer (struct iov_iter) with bio_iov_iter_get_pages() without
triggering a page fault;
5) iomap submits a bio for this 4K extent
(iomap_dio_submit_bio() -> btrfs_submit_direct()) and increments
the refcount on the struct iomap_dio object to 2; The ->size field
of the struct iomap_dio object is incremented to 4K;
6) iomap calls btrfs_iomap_begin() again, this time with a file
offset of X + 4K. There we setup an iomap for the next extent
that also has a size of 4K;
7) Then at iomap_dio_bio_iter() we call bio_iov_iter_get_pages(),
which tries to access the next page (2nd page) of the buffer.
This triggers a page fault and returns -EFAULT;
8) At __iomap_dio_rw() we see the -EFAULT, but we reset the error
to 0 because we passed the flag IOMAP_DIO_PARTIAL to iomap and
the struct iomap_dio object has a ->size value of 4K (we submitted
a bio for an extent already). The 'wait_for_completion' variable
is not set to true, because our iocb has IOCB_NOWAIT set;
9) At the bottom of __iomap_dio_rw(), we decrement the reference count
of the struct iomap_dio object from 2 to 1. Because we were not
the only ones holding a reference on it and 'wait_for_completion' is
set to false, -EIOCBQUEUED is returned to btrfs_direct_read(), which
just returns it up the callchain, up to io_uring;
10) The bio submitted for the first extent (step 5) completes and its
bio endio function, iomap_dio_bio_end_io(), decrements the last
reference on the struct iomap_dio object, resulting in calling
iomap_dio_complete_work() -> iomap_dio_complete().
11) At iomap_dio_complete() we adjust the iocb->ki_pos from X to X + 4K
and return 4K (the amount of io done) to iomap_dio_complete_work();
12) iomap_dio_complete_work() calls the iocb completion callback,
iocb->ki_complete() with a second argument value of 4K (total io
done) and the iocb with the adjust ki_pos of X + 4K. This results
in completing the read request for io_uring, leaving it with a
result of 4K bytes read, and only the first page of the buffer
filled in, while the remaining 3 pages, corresponding to the other
3 extents, were not filled;
13) For the application, the result is unexpected because if we ask
to read N bytes, it expects to get N bytes read as long as those
N bytes don't cross the EOF (i_size).
MariaDB reports this as an error, as it's not expecting a short read,
since it knows it's asking for read operations fully within the i_size
boundary. This is typical in many applications, but it may also be
questionable if they should react to such short reads by issuing more
read calls to get the remaining data. Nevertheless, the short read
happened due to a change in btrfs regarding how it deals with page
faults while in the middle of a read operation, and there's no reason
why btrfs can't have the previous behaviour of returning the whole data
that was requested by the application.
The problem can also be triggered with the following simple program:
/* Get O_DIRECT */
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <string.h>
#include <liburing.h>
int main(int argc, char *argv[])
{
char *foo_path;
struct io_uring ring;
struct io_uring_sqe *sqe;
struct io_uring_cqe *cqe;
struct iovec iovec;
int fd;
long pagesize;
void *write_buf;
void *read_buf;
ssize_t ret;
int i;
if (argc != 2) {
fprintf(stderr, "Use: %s <directory>\n", argv[0]);
return 1;
}
foo_path = malloc(strlen(argv[1]) + 5);
if (!foo_path) {
fprintf(stderr, "Failed to allocate memory for file path\n");
return 1;
}
strcpy(foo_path, argv[1]);
strcat(foo_path, "/foo");
/*
* Create file foo with 2 extents, each with a size matching
* the page size. Then allocate a buffer to read both extents
* with io_uring, using O_DIRECT and IOCB_NOWAIT. Before doing
* the read with io_uring, access the first page of the buffer
* to fault it in, so that during the read we only trigger a
* page fault when accessing the second page of the buffer.
*/
fd = open(foo_path, O_CREAT | O_TRUNC | O_WRONLY |
O_DIRECT, 0666);
if (fd == -1) {
fprintf(stderr,
"Failed to create file 'foo': %s (errno %d)",
strerror(errno), errno);
return 1;
}
pagesize = sysconf(_SC_PAGE_SIZE);
ret = posix_memalign(&write_buf, pagesize, 2 * pagesize);
if (ret) {
fprintf(stderr, "Failed to allocate write buffer\n");
return 1;
}
memset(write_buf, 0xab, pagesize);
memset(write_buf + pagesize, 0xcd, pagesize);
/* Create 2 extents, each with a size matching page size. */
for (i = 0; i < 2; i++) {
ret = pwrite(fd, write_buf + i * pagesize, pagesize,
i * pagesize);
if (ret != pagesize) {
fprintf(stderr,
"Failed to write to file, ret = %ld errno %d (%s)\n",
ret, errno, strerror(errno));
return 1;
}
ret = fsync(fd);
if (ret != 0) {
fprintf(stderr, "Failed to fsync file\n");
return 1;
}
}
close(fd);
fd = open(foo_path, O_RDONLY | O_DIRECT);
if (fd == -1) {
fprintf(stderr,
"Failed to open file 'foo': %s (errno %d)",
strerror(errno), errno);
return 1;
}
ret = posix_memalign(&read_buf, pagesize, 2 * pagesize);
if (ret) {
fprintf(stderr, "Failed to allocate read buffer\n");
return 1;
}
/*
* Fault in only the first page of the read buffer.
* We want to trigger a page fault for the 2nd page of the
* read buffer during the read operation with io_uring
* (O_DIRECT and IOCB_NOWAIT).
*/
memset(read_buf, 0, 1);
ret = io_uring_queue_init(1, &ring, 0);
if (ret != 0) {
fprintf(stderr, "Failed to create io_uring queue\n");
return 1;
}
sqe = io_uring_get_sqe(&ring);
if (!sqe) {
fprintf(stderr, "Failed to get io_uring sqe\n");
return 1;
}
iovec.iov_base = read_buf;
iovec.iov_len = 2 * pagesize;
io_uring_prep_readv(sqe, fd, &iovec, 1, 0);
ret = io_uring_submit_and_wait(&ring, 1);
if (ret != 1) {
fprintf(stderr,
"Failed at io_uring_submit_and_wait()\n");
return 1;
}
ret = io_uring_wait_cqe(&ring, &cqe);
if (ret < 0) {
fprintf(stderr, "Failed at io_uring_wait_cqe()\n");
return 1;
}
printf("io_uring read result for file foo:\n\n");
printf(" cqe->res == %d (expected %d)\n", cqe->res, 2 * pagesize);
printf(" memcmp(read_buf, write_buf) == %d (expected 0)\n",
memcmp(read_buf, write_buf, 2 * pagesize));
io_uring_cqe_seen(&ring, cqe);
io_uring_queue_exit(&ring);
return 0;
}
When running it on an unpatched kernel:
$ gcc io_uring_test.c -luring
$ mkfs.btrfs -f /dev/sda
$ mount /dev/sda /mnt/sda
$ ./a.out /mnt/sda
io_uring read result for file foo:
cqe->res == 4096 (expected 8192)
memcmp(read_buf, write_buf) == -205 (expected 0)
After this patch, the read always returns 8192 bytes, with the buffer
filled with the correct data. Although that reproducer always triggers
the bug in my test vms, it's possible that it will not be so reliable
on other environments, as that can happen if the bio for the first
extent completes and decrements the reference on the struct iomap_dio
object before we do the atomic_dec_and_test() on the reference at
__iomap_dio_rw().
Fix this in btrfs by having btrfs_dio_iomap_begin() return -EAGAIN
whenever we try to satisfy a non blocking IO request (IOMAP_NOWAIT flag
set) over a range that spans multiple extents (or a mix of extents and
holes). This avoids returning success to the caller when we only did
partial IO, which is not optimal for writes and for reads it's actually
incorrect, as the caller doesn't expect to get less bytes read than it has
requested (unless EOF is crossed), as previously mentioned. This is also
the type of behaviour that xfs follows (xfs_direct_write_iomap_begin()),
even though it doesn't use IOMAP_DIO_PARTIAL.
A test case for fstests will follow soon.
Link: https://lore.kernel.org/linux-btrfs/CABVffEM0eEWho+206m470rtM0d9J8ue85TtR-A_oVTuGLWFicA@mail.gmail.com/
Link: https://lore.kernel.org/linux-btrfs/CAHF2GV6U32gmqSjLe=XKgfcZAmLCiH26cJ2OnHGp5x=VAH4OHQ@mail.gmail.com/
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
On x86_64 we must disable preemption before we enable interrupts
for stack faults, int3 and debugging, because the current task is using
a per CPU debug stack defined by the IST. If we schedule out, another task
can come in and use the same stack and cause the stack to be corrupted
and crash the kernel on return.
When CONFIG_PREEMPT_RT is enabled, spinlock_t locks become sleeping, and
one of these is the spin lock used in signal handling.
Some of the debug code (int3) causes do_trap() to send a signal.
This function calls a spinlock_t lock that has been converted to a
sleeping lock. If this happens, the above issues with the corrupted
stack is possible.
Instead of calling the signal right away, for PREEMPT_RT and x86,
the signal information is stored on the stacks task_struct and
TIF_NOTIFY_RESUME is set. Then on exit of the trap, the signal resume
code will send the signal when preemption is enabled.
[ rostedt: Switched from #ifdef CONFIG_PREEMPT_RT to
ARCH_RT_DELAYS_SIGNAL_SEND and added comments to the code. ]
[bigeasy: Add on 32bit as per Yang Shi, minor rewording. ]
[ tglx: Use a config option ]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/Ygq5aBB/qMQw6aP5@linutronix.de
|
|
A common pattern for device reset is currently:
vdev->config->reset(vdev);
.. cleanup ..
reset prevents new interrupts from arriving and waits for interrupt
handlers to finish.
However if - as is common - the handler queues a work request which is
flushed during the cleanup stage, we have code adding buffers / trying
to get buffers while device is reset. Not good.
This was reproduced by running
modprobe virtio_console
modprobe -r virtio_console
in a loop.
Fix this up by calling virtio_break_device + flush before reset.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1786239
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Looks like most callers get driver/device removal wrong.
Document what's expected of callers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The feature negotiation was designed in a way that
makes it possible for devices to know which config
fields will be accessed by drivers.
This is broken since commit 404123c2db79 ("virtio: allow drivers to
validate features") with fallout in at least block and net. We have a
partial work-around in commit 2f9a174f918e ("virtio: write back
F_VERSION_1 before validate") which at least lets devices find out which
format should config space have, but this is a partial fix: guests
should not access config space without acknowledging features since
otherwise we'll never be able to change the config space format.
To fix, split finalize_features from virtio_finalize_features and
call finalize_features with all feature bits before validation,
and then - if validation changed any bits - once again after.
Since virtio_finalize_features no longer writes out features
rename it to virtio_features_ok - since that is what it does:
checks that features are ok with the device.
As a side effect, this also reduces the amount of hypervisor accesses -
we now only acknowledge features once unless we are clearing any
features when validating (which is uncommon).
IRC I think that this was more or less always the intent in the spec but
unfortunately the way the spec is worded does not say this explicitly, I
plan to address this at the spec level, too.
Acked-by: Jason Wang <jasowang@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 404123c2db79 ("virtio: allow drivers to validate features")
Fixes: 2f9a174f918e ("virtio: write back F_VERSION_1 before validate")
Cc: "Halil Pasic" <pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtio_finalize_features is only used internally within virtio.
No reason to export it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
When enabling a bearer on a node, a kernel panic is observed:
[ 4.498085] RIP: 0010:tipc_mon_prep+0x4e/0x130 [tipc]
...
[ 4.520030] Call Trace:
[ 4.520689] <IRQ>
[ 4.521236] tipc_link_build_proto_msg+0x375/0x750 [tipc]
[ 4.522654] tipc_link_build_state_msg+0x48/0xc0 [tipc]
[ 4.524034] __tipc_node_link_up+0xd7/0x290 [tipc]
[ 4.525292] tipc_rcv+0x5da/0x730 [tipc]
[ 4.526346] ? __netif_receive_skb_core+0xb7/0xfc0
[ 4.527601] tipc_l2_rcv_msg+0x5e/0x90 [tipc]
[ 4.528737] __netif_receive_skb_list_core+0x20b/0x260
[ 4.530068] netif_receive_skb_list_internal+0x1bf/0x2e0
[ 4.531450] ? dev_gro_receive+0x4c2/0x680
[ 4.532512] napi_complete_done+0x6f/0x180
[ 4.533570] virtnet_poll+0x29c/0x42e [virtio_net]
...
The node in question is receiving activate messages in another
thread after changing bearer status to allow message sending/
receiving in current thread:
thread 1 | thread 2
-------- | --------
|
tipc_enable_bearer() |
test_and_set_bit_lock() |
tipc_bearer_xmit_skb() |
| tipc_l2_rcv_msg()
| tipc_rcv()
| __tipc_node_link_up()
| tipc_link_build_state_msg()
| tipc_link_build_proto_msg()
| tipc_mon_prep()
| {
| ...
| // null-pointer dereference
| u16 gen = mon->dom_gen;
| ...
| }
// Not being executed yet |
tipc_mon_create() |
{ |
... |
// allocate |
mon = kzalloc(); |
... |
} |
Monitoring pointer in thread 2 is dereferenced before monitoring data
is allocated in thread 1. This causes kernel panic.
This commit fixes it by allocating the monitoring data before enabling
the bearer to receive messages.
Fixes: 35c55c9877f8 ("tipc: add neighbor monitoring framework")
Reported-by: Shuang Li <shuali@redhat.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is an oddity in the way the RSR register flags propagate to the
ISR register (and the actual interrupt output) on this hardware: it
appears that RSR register bits only result in ISR being asserted if the
interrupt was actually enabled at the time, so enabling interrupts with
RSR bits already set doesn't trigger an interrupt to be raised. There
was already a partial fix for this race in the macb_poll function where
it checked for RSR bits being set and re-triggered NAPI receive.
However, there was a still a race window between checking RSR and
actually enabling interrupts, where a lost wakeup could happen. It's
necessary to check again after enabling interrupts to see if RSR was set
just prior to the interrupt being enabled, and re-trigger receive in that
case.
This issue was noticed in a point-to-point UDP request-response protocol
which periodically saw timeouts or abnormally high response times due to
received packets not being processed in a timely fashion. In many
applications, more packets arriving, including TCP retransmissions, would
cause the original packet to be processed, thus masking the issue.
Fixes: 02f7a34f34e3 ("net: macb: Re-enable RX interrupt only when RX is done")
Cc: stable@vger.kernel.org
Co-developed-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds simple KUnit test for some binfmt_elf internals: specifically a
regression test for the problem fixed by commit 8904d9cd90ee ("ELF:
fix overflow in total mapping size calculation").
$ ./tools/testing/kunit/kunit.py run --arch x86_64 \
--kconfig_add CONFIG_IA32_EMULATION=y '*binfmt_elf'
...
[19:41:08] ================== binfmt_elf (1 subtest) ==================
[19:41:08] [PASSED] total_mapping_size_test
[19:41:08] =================== [PASSED] binfmt_elf ====================
[19:41:08] ============== compat_binfmt_elf (1 subtest) ===============
[19:41:08] [PASSED] total_mapping_size_test
[19:41:08] ================ [PASSED] compat_binfmt_elf ================
[19:41:08] ============================================================
[19:41:08] Testing complete. Passed: 2, Failed: 0, Crashed: 0, Skipped: 0, Errors: 0
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: David Gow <davidgow@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Magnus Groß" <magnus.gross@rwth-aachen.de>
Cc: kunit-dev@googlegroups.com
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
---
v1: https://lore.kernel.org/lkml/20220224054332.1852813-1-keescook@chromium.org
v2:
- improve commit log
- fix comment URL (Daniel)
- drop redundant KUnit Kconfig help info (Daniel)
- note in Kconfig help that COMPAT builds add a compat test (David)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix regression with processing of MGMT commands
- Fix unbalanced unlock in Set Device Flags
* tag 'for-net-2022-03-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: Fix not processing all entries on cmd_sync_work
Bluetooth: hci_core: Fix unbalanced unlock in set_device_flags()
====================
Link: https://lore.kernel.org/r/20220303210743.314679-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 67d96729a9e7 ("riscv: Update Canaan Kendryte K210 device tree")
incorrectly removed two entries from the PLIC interrupt-controller node's
interrupts-extended property.
The PLIC driver cannot know the mapping between hart contexts and hart ids,
so this information has to be provided by device tree, as specified by the
PLIC device tree binding.
The PLIC driver uses the interrupts-extended property, and initializes the
hart context registers in the exact same order as provided by the
interrupts-extended property.
In other words, if we don't specify the S-mode interrupts, the PLIC driver
will simply initialize the hart0 S-mode hart context with the hart1 M-mode
configuration. It is therefore essential to specify the S-mode IRQs even
though the system itself will only ever be running in M-mode.
Re-add the S-mode interrupts, so that we get working IRQs on hart1 again.
Cc: <stable@vger.kernel.org>
Fixes: 67d96729a9e7 ("riscv: Update Canaan Kendryte K210 device tree")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
