summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-04-24nvme_fc: add controller reset supportJames Smart
This patch actually does quite a few things. When looking to add controller reset support, the organization modeled after rdma was very fragmented. rdma duplicates the reset and teardown paths and does different things to the block layer on the two paths. The code to build up the controller is also duplicated between the initial creation and the reset/error recovery paths. So I decided to make this sane. I reorganized the controller creation and teardown so that there is a connect path and a disconnect path. Initial creation obviously uses the connect path. Controller teardown will use the disconnect path, followed last access code. Controller reset will use the disconnect path to stop operation, and then the connect path to re-establish the controller. Along the way, several things were fixed - aens were not properly set up. They are allocated differently from the per-request structure on the blk queues. - aens were oddly torn down. the prior patch corrected to abort, but we still need to dma unmap and free relative elements. - missed a few ref counting points: in aen completion and on i/o's that fail - controller initial create failure paths were still confused vs teardown before converting to ref counting vs after we convert to refcounting. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-04-24nvme_fc: add aen abort to teardownJames Smart
Add abort support for aens. Commonized the op abort to apply to aen or real ios (caused some reorg/routine movement). Abort path sets termination flag in prep for next patch that will be watching i/o abort completion before proceeding with controller teardown. Now that we're aborting aens, the "exit" code that simply cleared out their context no longer applies. Also clarified how we detect an AEN vs a normal io - by a flag, not by whether a rq exists or the a rqno is out of range. Note: saw some interesting cases where if the queues are stopped and we're waiting for the aborts, the core layer can call the complete_rq callback for the io. So the io completion synchronizes link side completion with possible blk layer completion under error. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-04-24nvme_fc: fix command id checkJames Smart
The code validates the command_id in the response to the original sqe command. But prior code was using the rq->rqno as the sqe command id. The core layer overwrites what the transport set there originally. Use the actual sqe content. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-04-24esp: Fix misplaced spin_unlock_bh.Steffen Klassert
A recent commit moved esp_alloc_tmp() out of a lock protected region, but forgot to remove the unlock from the error path. This patch removes the forgotten unlock. While at it, remove some unneeded error assignments too. Fixes: fca11ebde3f0 ("esp4: Reorganize esp_output") Fixes: 383d0350f2cc ("esp6: Reorganize esp_output") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-23module: Unify the return value type of try_module_getGao Feng
The prototypes of try_module_get are different with different macro. When enable module and module unload, it returns bool, but others not. Make the return type for try_module_get consistent across all module config options. Signed-off-by: Gao Feng <fgao@ikuai8.com> [jeyu: slightly amended changelog to make it clearer] Signed-off-by: Jessica Yu <jeyu@redhat.com>
2017-04-23sparc: Update syscall tables.David S. Miller
Hook up statx. Ignore pkeys system calls, we don't have protection keeys on SPARC. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-23sparc64: Fill in rest of HAVE_REGS_AND_STACK_ACCESS_APIDavid S. Miller
This lets us enable KPROBE_EVENTS. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-23md/raid1/10: remove unused queueLidong Zhong
A queue is declared and get from the disk of the array, but it's not used anywhere. So removing it from the source. Signed-off-by: Lidong Zhong <lzhong@suse.com> Acted-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-23Linux 4.11-rc8v4.11-rc8Linus Torvalds
2017-04-23Merge tag 'upstream-4.11-rc7' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI/UBIFS fixes from Richard Weinberger: "This contains fixes for issues in both UBI and UBIFS: - more O_TMPFILE fallout - RENAME_WHITEOUT regression due to a mis-merge - memory leak in ubifs_mknod() - power-cut problem in UBI's update volume feature" * tag 'upstream-4.11-rc7' of git://git.infradead.org/linux-ubifs: ubifs: Fix O_TMPFILE corner case in ubifs_link() ubifs: Fix RENAME_WHITEOUT support ubifs: Fix debug messages for an invalid filename in ubifs_dump_inode ubifs: Fix debug messages for an invalid filename in ubifs_dump_node ubifs: Remove filename from debug messages in ubifs_readdir ubifs: Fix memory leak in error path in ubifs_mknod ubi/upd: Always flush after prepared for an update
2017-04-23lightnvm: pblk: fix erase counters on error failJavier González
When block erases fail, these blocks are marked bad. The number of valid blocks in the line was not updated, which could cause an infinite loop on the erase path. Fix this atomic counter and, in order to avoid taking an irq lock on the interrupt context, make the erase counters atomic too. Also, in the case that a significant number of blocks become bad in a line, the result is the double shared metadata buffer (emeta) to stop the pipeline until all metadata is flushed to the media. Increase the number of metadata lines from 2 to 4 to avoid this case. Fixes: a4bd217b4326 "lightnvm: physical block device (pblk) target" Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-23lightnvm: pblk: free metadata on line alloc failureJavier González
When a line allocation fails, for example, due to having too many bad blocks, free its metadata correctly. Fixes: a4bd217b4326 "lightnvm: physical block device (pblk) target" Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-23lightnvm: pblk: fix memory leak on error pathJavier González
When write recovery fails, Free memory for the recovery structure. Fixes: a4bd217b4326 "lightnvm: physical block device (pblk) target" Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-23lightnvm: pblk: fix bad error checkJavier González
Fix bad error check Fixes: a4bd217b4326 "lightnvm: physical block device (pblk) target" Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-23lightnvm: pblk: fix race condition on line retryJavier González
When a pblk line fails (or is recovered), make sure to take the line management lock. Fixes: a4bd217b4326 "lightnvm: physical block device (pblk) target" Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-23bpf, doc: update list of architectures that do eBPF JITAlexei Starovoitov
update the list and remove 'in the future' statement, since all still alive 64-bit architectures now do eBPF JIT. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-23Merge branch 'ras-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS fix from Thomas Gleixner: "The MCE atomic notifier callchain invokes callbacks which might sleep. Convert it to a blocking notifier and prevent calls from atomic context" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Make the MCE notifier a blocking one
2017-04-23Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "The (hopefully) final fix for the irq affinity spreading logic" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/affinity: Fix calculating vectors to assign
2017-04-23block: fix blk_integrity_register to use template's interval_exp if not 0Mike Snitzer
When registering an integrity profile: if the template's interval_exp is not 0 use it, otherwise use the ilog2() of logical block size of the provided gendisk. This fixes a long-standing DM linear target bug where it cannot pass integrity data to the underlying device if its logical block size conflicts with the underlying device's logical block size. Cc: stable@vger.kernel.org Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-23powerpc/kprobes: Blacklist common exception handlersNaveen N. Rao
Blacklist all the exception common/OOL handlers as the kernel stack is not yet setup, which means we can't take a trap at this point. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-23powerpc/kprobes: Blacklist exception handlersNaveen N. Rao
Introduce __head_end to mark end of the early fixed sections and use it to blacklist all exception handlers from kprobes. mpe: We do not need to do anything special for relocatable kernels, where the exception vectors are split from the main kernel, as the split vectors are already excluded by the check for kernel_text_address(). Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> [mpe: Move __head_end outside #ifdef 64-bit to unbreak the 32-bit build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-23powerpc/kprobes: Convert __kprobes to NOKPROBE_SYMBOL()Naveen N. Rao
Along similar lines as commit 9326638cbee2 ("kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation"), convert __kprobes annotation to either NOKPROBE_SYMBOL() or nokprobe_inline. The latter forces inlining, in which case the caller needs to be added to NOKPROBE_SYMBOL(). Also: - blacklist arch_deref_entry_point(), and - convert a few regular inlines to nokprobe_inline in lib/sstep.c A key benefit is the ability to detect such symbols as being blacklisted. Before this patch: $ cat /sys/kernel/debug/kprobes/blacklist | grep read_mem $ perf probe read_mem Failed to write event: Invalid argument Error: Failed to add events. $ dmesg | tail -1 [ 3736.112815] Could not insert probe at _text+10014968: -22 After patch: $ cat /sys/kernel/debug/kprobes/blacklist | grep read_mem 0xc000000000072b50-0xc000000000072d20 read_mem $ perf probe read_mem read_mem is blacklisted function, skip it. Added new events: (null):(null) (on read_mem) probe:read_mem (on read_mem) You can now use it in all perf tools, such as: perf record -e probe:read_mem -aR sleep 1 $ grep " read_mem" /proc/kallsyms c000000000072b50 t read_mem c0000000005f3b40 t read_mem $ cat /sys/kernel/debug/kprobes/list c0000000005f3b48 k read_mem+0x8 [DISABLED] Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> [mpe: Minor change log formatting, fix up some conflicts] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-23powerpc/ftrace: Move stack setup and teardown code into ftrace_graph_caller()Naveen N. Rao
Move the stack setup and teardown code into ftrace_graph_caller(). This way, we don't incur the cost of setting it up unless function graph is enabled for this function. Also, remove the extraneous LR restore code after the function graph stub. LR has previously been restored and neither livepatch_handler() nor ftrace_graph_caller() return back here. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> [mpe: Drop bad change to non-mprofile-kernel version of ftrace_graph_caller] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-23powerpc/kprobes: Remove duplicate saving of MSRNaveen N. Rao
set_current_kprobe() already saves regs->msr into kprobe_saved_msr. Remove the redundant save. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-23powerpc/64s: Simplify POWER9 DD1 idle workaround codeNicholas Piggin
The idle workaround does not need to load PACATOC, and it does not need to be called within a nested function that requires LR to be saved. Load the PACATOC at entry to the idle wakeup. It does not matter which PACA this comes from, so it's okay to call before the workaround. Then apply the workaround to get the right PACA. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-23powerpc/64s: Idle POWER8 avoid full state loss recovery where possibleNicholas Piggin
If not all threads were in winkle, full state loss recovery is not necessary and can be avoided. A previous patch removed this optimisation due to some complexity with the implementation. Re-implement it by counting the number of threads in winkle with the per-core idle state. Only restore full state loss if all threads were in winkle. This has a small window of false positives right before threads execute winkle and just after they wake up, when the winkle count does not reflect the true number of threads in winkle. This is not a significant problem in comparison with even the minimum winkle duration. For correctness, a false positive is not a problem (only false negatives would be). Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-23powerpc/64s: Idle do not hold reservation longer than requiredNicholas Piggin
When taking the core idle state lock, grab it immediately like a regular lock, rather than adding more tests in there. Holding the lock keeps it stable, so there is no need to do it whole holding the reservation. Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-23powerpc/64s: Expand core idle state bitsNicholas Piggin
In preparation for adding more bits to the core idle state word, move the lock bit up, and unlock by flipping the lock bit rather than masking off all but the thread bits. Add branch hints for atomic operations while we're here. Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-23powerpc/64s: Fix POWER9 machine check handler from stop stateNicholas Piggin
The ISA specifies power save wakeup due to a machine check exception can cause a machine check interrupt (rather than the usual system reset interrupt). The machine check handler copes with this by doing low level machine check recovery without restoring full state from idle, then queues up a machine check event for logging, then directly executes the same idle instruction it woke from. This minimises the work done before recovery is performed. The problem is that it requires machine specific instructions and knowledge of the book3s idle code. Currently it only has code to handle POWER8 idle, so POWER9 crashes when trying to execute the P8 idle instructions which don't exist in ISAv3.0B. cpu 0x0: Vector: e40 (Emulation Assist) at [c0000000008f3810] pc: c000000000008380: machine_check_handle_early+0x130/0x2f0 lr: c00000000053a098: stop_loop+0x68/0xd0 sp: c0000000008f3a90 msr: 9000000000081001 current = 0xc0000000008a1080 paca = 0xc00000000ffd0000 softe: 0 irq_happened: 0x01 pid = 0, comm = swapper/0 Instead of going to sleep after recovery, do the usual idle wakeup and state restoration by calling into the normal idle wakeup path. This reuses the normal idle wakeup paths. Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reviewed-by: Mahesh J Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-23powerpc/64s: Use alternative feature patchingNicholas Piggin
This reduces the number of nops for POWER8. Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-23powerpc/64s: Stop using bit in HSPRG0 to test winkleNicholas Piggin
The POWER8 idle code has a neat trick of programming the power on engine to restore a low bit into HSPRG0, so idle wakeup code can test and see if it has been programmed this way and therefore lost all state. Restore time can be reduced if winkle has not been reached. However this messes with our r13 PACA pointer, and requires HSPRG0 to be written to. It also optimizes the slowest and most uncommon case at the expense of another SPR write in the common nap state wakeup. Remove this complexity and assume winkle sleeps always require a state restore. This speedup could be made entirely contained within the winkle idle code by counting per-core winkles and setting a thread bitmap when all have gone to winkle. Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-23powerpc/64s: Move remaining system reset idle code into idle_book3s.SNicholas Piggin
No functional change. Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-23Revert "x86/mm/gup: Switch GUP to the generic get_user_page_fast() ↵Ingo Molnar
implementation" This reverts commit 2947ba054a4dabbd82848728d765346886050029. Dan Williams reported dax-pmem kernel warnings with the following signature: WARNING: CPU: 8 PID: 245 at lib/percpu-refcount.c:155 percpu_ref_switch_to_atomic_rcu+0x1f5/0x200 percpu ref (dax_pmem_percpu_release [dax_pmem]) <= 0 (0) after switching to atomic ... and bisected it to this commit, which suggests possible memory corruption caused by the x86 fast-GUP conversion. He also pointed out: " This is similar to the backtrace when we were not properly handling pud faults and was fixed with this commit: 220ced1676c4 "mm: fix get_user_pages() vs device-dax pud mappings" I've found some missing _devmap checks in the generic get_user_pages_fast() path, but this does not fix the regression [...] " So given that there are known bugs, and a pretty robust looking bisection points to this commit suggesting that are unknown bugs in the conversion as well, revert it for the time being - we'll re-try in v4.13. Reported-by: Dan Williams <dan.j.williams@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: aneesh.kumar@linux.vnet.ibm.com Cc: dann.frazier@canonical.com Cc: dave.hansen@intel.com Cc: steve.capper@linaro.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-23powerpc/64s: Remove unnecessary relocation branch from idle handlerNicholas Piggin
The system reset idle handler system_reset_idle_common is relocated, so relocation is not required to branch to kvm_start_guest. The superfluous relocation does not result in incorrect code, but it does not compile outside of exception-64s.S (with fixed section definitions). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-22bpf: Add sparc support to tools and samples.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2017-04-22sparc64: Add eBPF JIT.David S. Miller
This is an eBPF JIT for sparc64. All major features are supported. All tests under tools/testing/selftests/bpf/ pass. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-22sparc: Split BPF JIT into 32-bit and 64-bit.David S. Miller
This is in preparation for adding the 64-bit eBPF JIT. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-22net/mlx5e: Fix ETHTOOL_GRXCLSRLALL handlingIlan Tayari
Handler for ETHTOOL_GRXCLSRLALL must set info->data to the size of the table, regardless of the amount of entries in it. Existing code does not do that, and this breaks all usage of ethtool -N or -n without explicit location, with this error: rmgr: Invalid RX class rules table size: Success Set info->data to the table size. Tested: ethtool -n ens8 ethtool -N ens8 flow-type ip4 src-ip 1.1.1.1 dst-ip 2.2.2.2 action 1 ethtool -N ens8 flow-type ip4 src-ip 1.1.1.1 dst-ip 2.2.2.2 action 1 loc 55 ethtool -n ens8 ethtool -N ens8 delete 1023 ethtool -N ens8 delete 55 Fixes: f913a72aa008 ("net/mlx5e: Add support to get ethtool flow rules") Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22net/mlx5e: Fix small packet thresholdEugenia Emantayev
RX packet headers are meant to be contained in SKB linear part, and chose a threshold of 128. It turns out this is not enough, i.e. for IPv6 packet over VxLAN. In this case, UDP/IPv4 needs 42 bytes, GENEVE header is 8 bytes, and 86 bytes for TCP/IPv6. In total 136 bytes that is more than current 128 bytes. In this case expand header flow is reached. The warning in skb_try_coalesce() caused by a wrong truesize was already fixed here: commit 158f323b9868 ("net: adjust skb->truesize in pskb_expand_head()"). Still, we prefer to totally avoid the expand header flow for performance reasons. Tested regular TCP_STREAM with iperf for 1 and 8 streams, no degradation was found. Fixes: 461017cb006a ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22net/mlx5: Fix UAR memory leakMaor Gottlieb
When UAR is released, we deallocate the device resource, but don't unmmap the UAR mapping memory. Fix the leak by unmapping this memory. Fixes: a6d51b68611e9 ('net/mlx5: Introduce blue flame register allocator) Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22net/mlx5e: Make sure the FW max encap size is enough for ipv6 tunnelsOr Gerlitz
Otherwise the code that fills the ipv6 encapsulation headers could be writing beyond the allocated headers buffer. Fixes: ce99f6b97fcd ('net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22net/mlx5e: Make sure the FW max encap size is enough for ipv4 tunnelsOr Gerlitz
Otherwise the code that fills the ipv4 encapsulation headers could be writing beyond the allocated headers buffer. Fixes: a54e20b4fcae ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22net/mlx5: E-Switch, Correctly deal with inline mode on ConnectX-5Or Gerlitz
On ConnectX5 the wqe inline mode is "none" and hence the FW reports MLX5_CAP_INLINE_MODE_NOT_REQUIRED. Fix our devlink callbacks to deal with that on get and set. Also fix the tc flow parsing code not to fail anything when inline isn't required. Fixes: bffaa916588e ('net/mlx5: E-Switch, Add control for inline mode') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22net/mlx5: Fix driver load bad flow when having fw initializing timeoutMohamad Haj Yahia
If FW is stuck in initializing state we will skip the driver load, but current error handling flow doesn't clean previously allocated command interface resources. Fixes: e3297246c2c8 ('net/mlx5_core: Wait for FW readiness on startup') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22mlx5: fix warning about missing prototypeStephen Hemminger
Fix sparse warning about missing prototypes. The rx/tx code path defines functions with prototypes in ipoib.h. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22mlx5: hide unused functionsStephen Hemminger
Fix sparse warnings in recent ipoib support. The RDMA functions are not used yet, hide behind #ifdef. Based on comment, they will eventually be local so make static. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22net/mlx5: E-Switch, Add control for encapsulationRoi Dayan
Implement the devlink e-switch encapsulation control set and get callbacks. Apply the value set by the user on the switchdev offloads mode when creating the fast FDB table where offloaded rules will be set. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22net/mlx5: E-Switch, Refactor fast path FDB table creation in switchdev modeOr Gerlitz
Refactor the creation of the fast path FDB table that holds the offloaded rules in SRIOV switchdev mode into it's own function. This will be used in the next patch to be able and re-create the table under different settings without going through legacy mode. This patch doesn't change any functionality. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22net/devlink: Add E-Switch encapsulation controlRoi Dayan
This is an e-switch global knob to enable HW support for applying encapsulation/decapsulation to VF traffic as part of SRIOV e-switch offloading. The actual encap/decap is carried out (along with the matching and other actions) per offloaded e-switch rules, e.g as done when offloading the TC tunnel key action. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-22Bluetooth: hci_ldisc: Add missing clear HCI_UART_PROTO_READYDean Jenkins
Ensure that HCI_UART_PROTO_READY is cleared before close(hu) is called which closes the Data Link protocol layer. Therefore, add the missing bit clear of HCI_UART_PROTO_READY to hci_uart_init_work() so that the flag is cleared when hci_register_dev fails. Without the fix, the functions of the Data Link protocol layer could potentially be accessed after that layer has been closed. This could lead to a crash as memory would have been freed in that layer. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit (git 2.34.1) at 2025-09-22 05:07:57 +0000