| Age | Commit message (Collapse) | Author |
|---|
|
While testing prior patch, I was able to trigger
an infinite loop in rt6_nlmsg_size() in the following place:
list_for_each_entry_rcu(sibling, &f6i->fib6_siblings,
fib6_siblings) {
rt6_nh_nlmsg_size(sibling->fib6_nh, &nexthop_len);
}
This is because fib6_del_route() and fib6_add_rt2node()
uses list_del_rcu(), which can confuse rcu readers,
because they might no longer see the head of the list.
Restart the loop if f6i->fib6_nsiblings is zero.
Fixes: d9ccb18f83ea ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250725140725.3626540-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inet6_rt_notify() can be called under RCU protection only.
This means the route could be changed concurrently
and rt6_fill_node() could return -EMSGSIZE.
Re-size the skb when this happens and retry, removing
one WARN_ON() that syzbot was able to trigger:
WARNING: CPU: 3 PID: 6291 at net/ipv6/route.c:6342 inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342
Modules linked in:
CPU: 3 UID: 0 PID: 6291 Comm: syz.0.77 Not tainted 6.16.0-rc7-syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342
Code: fc ff ff e8 6d 52 ea f7 e9 47 fc ff ff 48 8b 7c 24 08 4c 89 04 24 e8 5a 52 ea f7 4c 8b 04 24 e9 94 fd ff ff e8 9c fe 84 f7 90 <0f> 0b 90 e9 bd fd ff ff e8 6e 52 ea f7 e9 bb fb ff ff 48 89 df e8
RSP: 0018:ffffc900035cf1d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffffc900035cf540 RCX: ffffffff8a36e790
RDX: ffff88802f7e8000 RSI: ffffffff8a36e9d4 RDI: 0000000000000005
RBP: ffff88803c230f00 R08: 0000000000000005 R09: 00000000ffffffa6
R10: 00000000ffffffa6 R11: 0000000000000001 R12: 00000000ffffffa6
R13: 0000000000000900 R14: ffff888032ea4100 R15: 0000000000000000
FS: 00007fac7b89a6c0(0000) GS:ffff8880d6a20000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fac7b899f98 CR3: 0000000034b3f000 CR4: 0000000000352ef0
Call Trace:
<TASK>
ip6_route_mpath_notify+0xde/0x280 net/ipv6/route.c:5356
ip6_route_multipath_add+0x1181/0x1bd0 net/ipv6/route.c:5536
inet6_rtm_newroute+0xe4/0x1a0 net/ipv6/route.c:5647
rtnetlink_rcv_msg+0x95e/0xe90 net/core/rtnetlink.c:6944
netlink_rcv_skb+0x155/0x420 net/netlink/af_netlink.c:2552
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0x58d/0x850 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
____sys_sendmsg+0xa95/0xc70 net/socket.c:2566
___sys_sendmsg+0x134/0x1d0 net/socket.c:2620
Fixes: 169fd62799e8 ("ipv6: Get rid of RTNL for SIOCADDRT and RTM_NEWROUTE.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://patch.msgid.link/20250725140725.3626540-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit ff3fbcdd4724 ("selftests: tc: Add generic erspan_opts matching support
for tc-flower") started triggering the following kmemleak warning:
unreferenced object 0xffff888015fb0e00 (size 512):
comm "softirq", pid 0, jiffies 4294679065
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 40 d2 85 9e ff ff ff ff ........@.......
41 69 59 9d ff ff ff ff 00 00 00 00 00 00 00 00 AiY.............
backtrace (crc 30b71e8b):
__kmalloc_noprof+0x359/0x460
metadata_dst_alloc+0x28/0x490
erspan_rcv+0x4f1/0x1160 [ip_gre]
gre_rcv+0x217/0x240 [ip_gre]
gre_rcv+0x1b8/0x400 [gre]
ip_protocol_deliver_rcu+0x31d/0x3a0
ip_local_deliver_finish+0x37d/0x620
ip_local_deliver+0x174/0x460
ip_rcv+0x52b/0x6b0
__netif_receive_skb_one_core+0x149/0x1a0
process_backlog+0x3c8/0x1390
__napi_poll.constprop.0+0xa1/0x390
net_rx_action+0x59b/0xe00
handle_softirqs+0x22b/0x630
do_softirq+0xb1/0xf0
__local_bh_enable_ip+0x115/0x150
vrf_ip6_input_dst unconditionally sets skb dst entry, add a call to
skb_dst_drop to drop any existing entry.
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Fixes: 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250725160043.350725-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both taprio and mqprio have code to validate respective entry index
attributes. The validation is indented to ensure that the attribute is
present, and that it's value is in range, and that each value is only
used once.
The purpose of this patch is to align the implementation of taprio with
that of mqprio as there seems to be no good reason for them to differ.
For one thing, this way, bugs will be present in both or neither.
As a follow-up some consideration could be given to a common function
used by both sch.
No functional change intended.
Except of tdc run: the results of the taprio tests
# ok 81 ba39 - Add taprio Qdisc to multi-queue device (8 queues)
# ok 82 9462 - Add taprio Qdisc with multiple sched-entry
# ok 83 8d92 - Add taprio Qdisc with txtime-delay
# ok 84 d092 - Delete taprio Qdisc with valid handle
# ok 85 8471 - Show taprio class
# ok 86 0a85 - Add taprio Qdisc to single-queue device
# ok 87 6f62 - Add taprio Qdisc with too short interval
# ok 88 831f - Add taprio Qdisc with too short cycle-time
# ok 89 3e1e - Add taprio Qdisc with an invalid cycle-time
# ok 90 39b4 - Reject grafting taprio as child qdisc of software taprio
# ok 91 e8a1 - Reject grafting taprio as child qdisc of offloaded taprio
# ok 92 a7bf - Graft cbs as child of software taprio
# ok 93 6a83 - Graft cbs as child of offloaded taprio
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: Maher Azzouzi <maherazz04@gmail.com>
Link: https://lore.kernel.org/netdev/20250723125521.GA2459@horms.kernel.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://patch.msgid.link/20250725-taprio-idx-parse-v1-1-b582fffcde37@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Silence deferred probes using dev_err_probe(). This can happen when
the ethernet PHY uses an IRQ line attached to a i2c GPIO expander. If the
i2c bus is not yet ready, a probe deferral can occur.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725055615.259945-1-alexander.stein@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The esp4_offload module, loaded during IPsec offload tests, should
be reset to its default settings after testing.
Otherwise, leaving it enabled could unintentionally affect subsequence
test cases by keeping offload active.
Without this fix:
$ lsmod | grep offload; ./rtnetlink.sh -t kci_test_ipsec_offload ; lsmod | grep offload;
PASS: ipsec_offload
esp4_offload 12288 0
esp4 32768 1 esp4_offload
With this fix:
$ lsmod | grep offload; ./rtnetlink.sh -t kci_test_ipsec_offload ; lsmod | grep offload;
PASS: ipsec_offload
Fixes: 2766a11161cc ("selftests: rtnetlink: add ipsec offload API test")
Signed-off-by: Xiumei Mu <xmu@redhat.com>
Reviewed-by: Shannon Nelson <sln@onemain.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/6d3a1d777c4de4eb0ca94ced9e77be8d48c5b12f.1753415428.git.xmu@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The local variable 'vm_addr' is always not NULL, no need to check it.
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250725013808.337924-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jason Xing says:
====================
xsk: fix negative overflow issues in zerocopy xmit
Fix two negative overflow issues around {stmmac_xdp|igb}_xmit_zc().
====================
Link: https://patch.msgid.link/20250723142327.85187-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no break time in the while() loop, so every time at the end of
igb_xmit_zc(), negative overflow of nb_pkts will occur, which renders
the return value always false. But theoretically, the result should be
set after calling xsk_tx_peek_release_desc_batch(). We can take
i40e_xmit_zc() as a good example.
Returning false means we're not done with transmission and we need one
more poll, which is exactly what igb_xmit_zc() always did before this
patch. After this patch, the return value depends on the nb_pkts value.
Two cases might happen then:
1. if (nb_pkts < budget), it means we process all the possible data, so
return true and no more necessary poll will be triggered because of
this.
2. if (nb_pkts == budget), it means we might have more data, so return
false to let another poll run again.
Fixes: f8e284a02afc ("igb: Add AF_XDP zero-copy Tx support")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20250723142327.85187-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A negative overflow can happen when the budget number of descs are
consumed. as long as the budget is decreased to zero, it will again go
into while (budget-- > 0) statement and get decreased by one, so the
overflow issue can happen. It will lead to returning true whereas the
expected value should be false.
In this case where all the budget is used up, it means zc function
should return false to let the poll run again because normally we
might have more data to process. Without this patch, zc function would
return true instead.
Fixes: 132c32ee5bc0 ("net: stmmac: Add TX via XDP zero-copy socket")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20250723142327.85187-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert at86rf230.txt yaml format.
Additional changes:
- Add ref to spi-peripheral-props.yaml.
- Add parent spi node in examples.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250724230129.1480174-1-Frank.Li@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull ARM fixes from Russell King:
- use an absolute path for asm/unified.h in KBUILD_AFLAGS to solve a
regression caused by commit d5c8d6e0fa61 ("kbuild: Update assembler
calls to use proper flags and language target")
- fix dead code elimination binutils version check again
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9450/1: Fix allowing linker DCE with binutils < 2.36
ARM: 9448/1: Use an absolute path to unified.h in KBUILD_AFLAGS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These are two fixes that came in late, one addresses a regression on a
rockchips based board, the other is for ensuring a consistent dt
binding for a device added in 6.16 before the incorrect one makes it
into a release"
* tag 'soc-fixes-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: rockchip: Drop netdev led-triggers on NanoPi R5S
arm64: dts: allwinner: a523: Rename emac0 to gmac0
|
|
* kvm-arm64/misc:
: Miscellaneous fixes/cleanups for KVM/arm64
:
: - Fixes for computing POE output permissions
:
: - Return ENXIO for invalid VGIC device attribute
:
: - String helper conversions
arm64: kvm: trace_handle_exit: use string choices helper
arm64: kvm: sys_regs: use string choices helper
KVM: arm64: Follow specification when implementing WXN
KVM: arm64: Remove the wi->{e0,}poe vs wr->{p,u}ov confusion
KVM: arm64: vgic-its: Return -ENXIO to invalid KVM_DEV_ARM_VGIC_GRP_CTRL attrs
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/gcie-legacy:
: Support for GICv3 emulation on GICv5, courtesy of Sascha Bischoff
:
: FEAT_GCIE_LEGACY adds the necessary hardware for GICv5 systems to
: support the legacy GICv3 for VMs, including a backwards-compatible VGIC
: implementation that we all know and love.
:
: As a starting point for GICv5 enablement in KVM, enable + use the
: GICv3-compatible feature when running VMs on GICv5 hardware.
KVM: arm64: gic-v5: Probe for GICv5
KVM: arm64: gic-v5: Support GICv3 compat
arm64/sysreg: Add ICH_VCTLR_EL2
irqchip/gic-v5: Populate struct gic_kvm_info
irqchip/gic-v5: Skip deactivate for forwarded PPI interrupts
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
GICv5 initial host support
Add host kernel support for the new arm64 GICv5 architecture, which is
quite a departure from the previous ones.
Include support for the full gamut of the architecture (interrupt
routing and delivery to CPUs, wired interrupts, MSIs, and interrupt
translation).
* tag 'irqchip-gic-v5-host': (32 commits)
arm64: smp: Fix pNMI setup after GICv5 rework
arm64: Kconfig: Enable GICv5
docs: arm64: gic-v5: Document booting requirements for GICv5
irqchip/gic-v5: Add GICv5 IWB support
irqchip/gic-v5: Add GICv5 ITS support
irqchip/msi-lib: Add IRQ_DOMAIN_FLAG_FWNODE_PARENT handling
irqchip/gic-v3: Rename GICv3 ITS MSI parent
PCI/MSI: Add pci_msi_map_rid_ctlr_node() helper function
of/irq: Add of_msi_xlate() helper function
irqchip/gic-v5: Enable GICv5 SMP booting
irqchip/gic-v5: Add GICv5 LPI/IPI support
irqchip/gic-v5: Add GICv5 IRS/SPI support
irqchip/gic-v5: Add GICv5 PPI support
arm64: Add support for GICv5 GSB barriers
arm64: smp: Support non-SGIs for IPIs
arm64: cpucaps: Add GICv5 CPU interface (GCIE) capability
arm64: cpucaps: Rename GICv3 CPU interface capability
arm64: Disable GICv5 read/write/instruction traps
arm64/sysreg: Add ICH_HFGITR_EL2
arm64/sysreg: Add ICH_HFGWTR_EL2
...
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/doublefault2: (33 commits)
: NV Support for FEAT_RAS + DoubleFault2
:
: Delegate the vSError context to the guest hypervisor when in a nested
: state, including registers related to ESR propagation. Additionally,
: catch up KVM's external abort infrastructure to the architecture,
: implementing the effects of FEAT_DoubleFault2.
:
: This has some impact on non-nested guests, as SErrors deemed unmasked at
: the time they're made pending are now immediately injected with an
: emulated exception entry rather than using the VSE bit.
KVM: arm64: Make RAS registers UNDEF when RAS isn't advertised
KVM: arm64: Filter out HCR_EL2 bits when running in hypervisor context
KVM: arm64: Check for SYSREGS_ON_CPU before accessing the CPU state
KVM: arm64: Commit exceptions from KVM_SET_VCPU_EVENTS immediately
KVM: arm64: selftests: Test ESR propagation for vSError injection
KVM: arm64: Populate ESR_ELx.EC for emulated SError injection
KVM: arm64: selftests: Catch up set_id_regs with the kernel
KVM: arm64: selftests: Add SCTLR2_EL1 to get-reg-list
KVM: arm64: selftests: Test SEAs are taken to SError vector when EASE=1
KVM: arm64: selftests: Add basic SError injection test
KVM: arm64: Don't retire MMIO instruction w/ pending (emulated) SError
KVM: arm64: Advertise support for FEAT_DoubleFault2
KVM: arm64: Advertise support for FEAT_SCTLR2
KVM: arm64: nv: Enable vSErrors when HCRX_EL2.TMEA is set
KVM: arm64: nv: Honor SError routing effects of SCTLR2_ELx.NMEA
KVM: arm64: nv: Take "masked" aborts to EL2 when HCRX_EL2.TMEA is set
KVM: arm64: Route SEAs to the SError vector when EASE is set
KVM: arm64: nv: Ensure Address size faults affect correct ESR
KVM: arm64: Factor out helper for selecting exception target EL
KVM: arm64: Describe SCTLR2_ELx RESx masks
...
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/cacheable-pfnmap:
: Cacheable PFNMAP support at stage-2, courtesy of Ankit Agrawal
:
: For historical reasons, KVM only allows cacheable mappings at stage-2
: when a kernel alias exists in the direct map for the memory region. On
: hardware without FEAT_S2FWB, this is necessary as KVM must do cache
: maintenance to keep guest/host accesses coherent.
:
: This is unnecessarily restrictive on systems with FEAT_S2FWB and
: CTR_EL0.DIC, as KVM no longer needs to perform cache maintenance to
: maintain correctness.
:
: Allow cacheable mappings at stage-2 on supporting hardware when the
: corresponding VMA has cacheable memory attributes and advertise a
: capability to userspace such that a VMM can determine if a stage-2
: mapping can be established (e.g. VFIO device).
KVM: arm64: Expose new KVM cap for cacheable PFNMAP
KVM: arm64: Allow cacheable stage 2 mapping using VMA flags
KVM: arm64: Block cacheable PFNMAP mapping
KVM: arm64: Assume non-PFNMAP/MIXEDMAP VMAs can be mapped cacheable
KVM: arm64: Rename the device variable to s2_force_noncacheable
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM allows userspace to control GICD_IIDR.Revision and
GICD_TYPER2.nASSGIcap prior to initialization for the sake of
provisioning the guest-visible feature set. Document the userspace
expectations surrounding accesses to these registers.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250724062805.2658919-7-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Extend vgic_init to test the nASSGIcap attribute, asserting that it is
configurable (within reason) prior to initializing the VGIC.
Additionally, check that userspace cannot set the attribute after the
VGIC has been initialized.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250724062805.2658919-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM unconditionally advertises GICD_TYPER2.nASSGIcap (which internally
implies vSGIs) on GICv4.1 systems. Allow userspace to change whether a
VM supports the feature. Only allow changes prior to VGIC initialization
as at that point vPEs need to be allocated for the VM.
For convenience, bundle support for vLPIs and vSGIs behind this feature,
allowing userspace to control vPE allocation for VMs in environments
that may be constrained on vPE IDs.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250724062805.2658919-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM allows userspace to write GICD_IIDR for backwards-compatibility with
older kernels, where new implementation revisions have new features.
Unfortunately this is allowed to happen at runtime, and ripping features
out from underneath a running guest is a terrible idea.
While we can't do anything about the ABI, prepare for more ID-like
registers by allowing access to GICD_IIDR prior to VGIC initialization.
Hoist initializaiton of the default value to kvm_vgic_create() and
discard the incorrect comment that assumed userspace could access the
register before initialization (until now).
Subsequent changes will allow the VMM to further provision the GIC
feature set, e.g. the presence of nASSGIcap.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250724062805.2658919-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Consolidate the duplicated handling of the VGICv3 maintenance IRQ
attribute as a regular GICv3 attribute, as it is neither a register nor
a common attribute. As this is now handled separately from the VGIC
registers, the locking is relaxed to only acquire the intended
config_lock.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250724062805.2658919-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
vgic_supports_direct_msis() is a bit of a misnomer, as it returns true
if either vSGIs or vLPIs are supported. Pick it apart into a few
predicates and replace some open-coded checks for vSGIs, including an
opportunistic fix to always check if the CPUIF is capable of handling
vSGIs.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250724062805.2658919-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
We have a lot of more or less useful vgic tests, but none of them
tracks the availability of GICv3 system registers, which is a bit
annoying.
Add one such test, which covers both EL1 and EL2 registers.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250718111154.104029-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
In order to avoid further embarassing bugs, enforce that the GICv3
sysreg table is actually sorted, just like all the other tables.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250718111154.104029-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
check_sysreg_table() has a wonky 'is_32" parameter, which is really
an indication that we should enforce the presence of a reset helper.
Clean this up by naming the variable accordingly and inverting the
condition. Contrary to popular belief, system instructions don't
have a reset value (duh!), and therefore do not need to be checked
for reset (they escaped the check through luck...).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250718111154.104029-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The sysreg tables are supposed to be sorted so that a binary search
can easily find them. However, ICH_HCR_EL2 is obviously at the wrong
spot.
Move it where it belongs.
Fixes: 9fe9663e47e21 ("KVM: arm64: Expose GICv3 EL2 registers via KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250718111154.104029-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
arch/sh/Makefile defines and exports ld-bfd to be used by
arch/sh/boot/compressed/Makefile and arch/sh/boot/romimage/Makefile.
However some shells, including dash, will not pass through environment
variables whose name includes a hyphen. Usually GNU make does not use
a shell to recurse, but if e.g. $(srctree) contains '~' it will use a
shell here.
Other instances of this problem were previously fixed by commits
2bfbe7881ee0 "kbuild: Do not use hyphen in exported variable name"
and 82977af93a0d "sh: rename suffix-y to suffix_y".
Rename the variable to ld_bfd.
References: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=sh4&ver=4.13%7Erc5-1%7Eexp1&stamp=1502943967&raw=0
Fixes: 7b022d07a0fd ("sh: Tidy up the ldscript output format specifier.")
Signed-off-by: Ben Hutchings <benh@debian.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner fixes for 6.16
Only one fix:
Correct the name of the A523's EMAC0 to GMAC0, as seen in the SoC's
datasheets. The matching DT binding change is in the net tree.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Yonghong Song says:
====================
selftests/bpf: Fix a few dynptr test failures with 64K page size
There are a few dynptr test failures with arm64 64K page size.
They are fixed in this patch set and please see individual patches
for details.
====================
Link: https://patch.msgid.link/20250725043425.208128-1-yonghong.song@linux.dev
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
For arm64 64K page size, the xdp data size was set to be more than 64K
in one of previous patches. This will cause failure for bpf_dynptr_memset().
Since the failure of bpf_dynptr_memset() is expected with 64K page size,
return success.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250725043440.209266-1-yonghong.song@linux.dev
|
|
For arm64 64K page size, the bpf_dynptr_copy() in test dynptr/test_dynptr_copy_xdp
will succeed, but the test will failure with 4K page size. This patch made a change
so the test will fail expectedly for both 4K and 64K page sizes.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://patch.msgid.link/20250725043435.208974-1-yonghong.song@linux.dev
|
|
With arm64 64K page size, the following 4 subtests failed:
#97/25 dynptr/test_probe_read_user_dynptr:FAIL
#97/26 dynptr/test_probe_read_kernel_dynptr:FAIL
#97/27 dynptr/test_probe_read_user_str_dynptr:FAIL
#97/28 dynptr/test_probe_read_kernel_str_dynptr:FAIL
These failures are due to function bpf_dynptr_check_off_len() in
include/linux/bpf.h where there is a test
if (len > size || offset > size - len)
return -E2BIG;
With 64K page size, the 'offset' is greater than 'size - len',
which caused the test failure.
For 64KB page size, this patch increased the xdp buffer size from 5000 to
90000. The above 4 test failures are fixed as 'size' value is increased.
But it introduced two new failures:
#97/4 dynptr/test_dynptr_copy_xdp:FAIL
#97/12 dynptr/test_dynptr_memset_xdp_chunks:FAIL
These two failures will be addressed in subsequent patches.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://patch.msgid.link/20250725043430.208469-1-yonghong.song@linux.dev
|
|
Tristram Ha says:
====================
net: dsa: microchip: Add KSZ8463 switch support
This series of patches is to add KSZ8463 switch support to the KSZ DSA
driver.
====================
Link: https://patch.msgid.link/20250725001753.6330-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PTP function of KSZ8463 is on by default. However, its proprietary
way of storing timestamp directly in a reserved field inside the PTP
message header is not suitable for use with the current Linux PTP stack
implementation. It is necessary to disable the PTP function to not
interfere the normal operation of the MAC.
Note the PTP driver for KSZ switches does not work for KSZ8463 and is not
activated for it.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-7-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The fiber ports in KSZ8463 cannot be detected internally, so it requires
specifying that condition in the device tree. Like the one used in
Micrel PHY the port link can only be read and there is no write to the
PHY. The driver programs registers to operate fiber ports correctly.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-6-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8463 uses 16-bit register definitions so it writes differently for
8-bit switch MAC address.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-5-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8463 does not use same set of registers as KSZ8863 so it is necessary
to change some registers when using KSZ8463.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-4-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8463 switch is a 3-port switch based from KSZ8863. Its major
difference from other KSZ SPI switches is its register access is not a
simple continual 8-bit transfer with automatic address increase but uses
a byte-enable mechanism specifying 8-bit, 16-bit, or 32-bit access. Its
registers are also defined in 16-bit format because it shares a design
with a MAC controller using 16-bit access. As a result some common
register accesses need to be re-arranged.
This patch adds the basic structure for using KSZ8463. It cannot use the
same regmap table for other KSZ switches as it interprets the 16-bit
value as little-endian and its SPI commands are different.
KSZ8463 uses a byte-enable mechanism to specify 8-bit, 16-bit, and 32-bit
access. The register is first shifted right by 2 then left by 4. Extra
4 bits are added. If the access is 8-bit one of the 4 bits is set. If
the access is 16-bit two of the 4 bits are set. If the access is 32-bit
all 4 bits are set. The SPI command for read or write is then added.
Because of this register transformation separate SPI read and write
functions are provided for KSZ8463.
KSZ8463's internal PHYs use standard PHY register definitions so there is
no need to remap things. However, the hardware has a bug that the high
word and low word of the PHY id are swapped. In addition the port
registers are arranged differently so KSZ8463 has its own mapping for
port registers and PHY registers. Therefore the PORT_CTRL_ADDR macro is
replaced with the get_port_addr helper function.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-3-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8463 switch is a 3-port switch based from KSZ8863. Its register
access is significantly different from the other KSZ SPI switches.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-2-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, UDP exchange is prone to failure when cmd attempt to send data
while socat in bkg is not ready. Since, the behavior is probabilistic, this
can result in flakiness for XDP tests. While testing
test_xdp_native_tx_mb() on netdevsim, a failure rate of around 1% in 500
500 iterations was observed.
Use wait_port_listen() to ensure that the bkg socat is started and ready to
receive before cmd start sending. With proposed changes, a re-run of the
same test passed 100% of time.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250724235140.2645885-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthew Gerlach says:
====================
arm64: dts: socfpga: enable ethernet support for Agilex5
This patch set enables ethernet support for the Agilex5 family of SOCFPGAs,
and specifically enables gmac2 on the Agilex5 SOCFPGA Premium Development
Kit.
Patch 1 defines Agilex5 compatibility string in the device tree bindings.
Patch 2 add the new compatibility string to dwmac-socfpga.c.
====================
Link: https://patch.msgid.link/20250724154052.205706-1-matthew.gerlach@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for Agilex5 compatible value.
Signed-off-by: Mun Yew Tham <mun.yew.tham@altera.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/20250724154052.205706-5-matthew.gerlach@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add compatible string for the Altera Agilex5 variant of the Synopsys DWC
XGMAC IP version 2.10.
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250724154052.205706-2-matthew.gerlach@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-07-25
The patch is by Stephane Grosjean and adds support the recent firmware
of USB CAN FD interfaces to the peak_usb driver.
* tag 'linux-can-fixes-for-6.16-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: peak_usb: fix USB FD devices potential malfunction
====================
Link: https://patch.msgid.link/20250725101619.4095105-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following series contains Netfilter/IPVS updates for net-next:
1) Display netns inode in conntrack table full log, from lvxiafei.
2) Autoload nf_log_syslog in case no logging backend is available,
from Lance Yang.
3) Three patches to remove unused functions in x_tables, nf_tables and
conntrack. From Yue Haibing.
4) Exclude LEGACY TABLES on PREEMPT_RT: Add NETFILTER_XTABLES_LEGACY
to exclude xtables legacy infrastructure.
5) Restore selftests by toggling NETFILTER_XTABLES_LEGACY where needed.
From Florian Westphal.
6) Use CONFIG_INET_SCTP_DIAG in tools/testing/selftests/net/netfilter/config,
from Sebastian Andrzej Siewior.
7) Use timer_delete in comment in IPVS codebase, from WangYuli.
8) Dump flowtable information in nfnetlink_hook, this includes an initial
patch to consolidate common code in helper function, from Phil Sutter.
9) Remove unused arguments in nft_pipapo set backend, from Florian Westphal.
10) Return nft_set_ext instead of boolean in set lookup function,
from Florian Westphal.
11) Remove indirection in dynamic set infrastructure, also from Florian.
12) Consolidate pipapo_get/lookup, from Florian.
13) Use kvmalloc in nft_pipapop, from Florian Westphal.
14) syzbot reports slab-out-of-bounds in xt_nfacct log message,
fix from Florian Westphal.
15) Ignored tainted kernels in selftest nft_interface_stress.sh,
from Phil Sutter.
16) Fix IPVS selftest by disabling rp_filter with ipip tunnel device,
from Yi Chen.
* tag 'nf-next-25-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
selftests: netfilter: ipvs.sh: Explicity disable rp_filter on interface tunl0
selftests: netfilter: Ignore tainted kernels in interface stress test
netfilter: xt_nfacct: don't assume acct name is null-terminated
netfilter: nft_set_pipapo: prefer kvmalloc for scratch maps
netfilter: nft_set_pipapo: merge pipapo_get/lookup
netfilter: nft_set: remove indirection from update API call
netfilter: nft_set: remove one argument from lookup and update functions
netfilter: nft_set_pipapo: remove unused arguments
netfilter: nfnetlink_hook: Dump flowtable info
netfilter: nfnetlink: New NFNLA_HOOK_INFO_DESC helper
ipvs: Rename del_timer in comment in ip_vs_conn_expire_now()
selftests: netfilter: Enable CONFIG_INET_SCTP_DIAG
selftests: net: Enable legacy netfilter legacy options.
netfilter: Exclude LEGACY TABLES on PREEMPT_RT.
netfilter: conntrack: Remove unused net in nf_conntrack_double_lock()
netfilter: nf_tables: Remove unused nft_reduce_is_readonly()
netfilter: x_tables: Remove unused functions xt_{in|out}name()
netfilter: load nf_log_syslog on enabling nf_conntrack_log_invalid
netfilter: conntrack: table full detailed log
====================
Link: https://patch.msgid.link/20250725170340.21327-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-07-25
The first patch is by Khaled Elnaggar and converts the janz-ican3
driver's fwinfo_show() to sysfs_emit().
Vincent Mailhol contributes 3 patches that first fix a warning in the
ti_hecc driver and then add missing COMPILE_TEST more compile
coverage to the ti_hecc and tscan1 driver.
Randy Dunlap's patch let's the tscan1 driver depend on PC104.
A patch by Luis Felipe Hernandez fixes a kernel-doc error in the
ctucanfd driver.
Jimmy Assarsson contributes 10 patches for the kvaser_pciefd and 11
for the kvaser_usb driver. Both series simplify the identification of
physical the CAN interfaces and add devlink support to get information
about the running firmware.
* tag 'linux-can-next-for-6.17-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (27 commits)
Documentation: devlink: add devlink documentation for the kvaser_usb driver
can: kvaser_usb: Add devlink port support
can: kvaser_usb: Expose device information via devlink info_get()
can: kvaser_usb: Add devlink support
can: kvaser_usb: Store additional device information
can: kvaser_usb: Store the different firmware version components in a struct
can: kvaser_usb: Move comment regarding max_tx_urbs
can: kvaser_usb: Add intermediate variables
can: kvaser_usb: Assign netdev.dev_port based on device channel index
can: kvaser_usb: Add support for ethtool set_phys_id()
can: kvaser_usb: Add support to control CAN LEDs on device
Documentation: devlink: add devlink documentation for the kvaser_pciefd driver
can: kvaser_pciefd: Add devlink port support
can: kvaser_pciefd: Expose device firmware version via devlink info_get()
can: kvaser_pciefd: Add devlink support
can: kvaser_pciefd: Split driver into C-file and header-file.
can: kvaser_pciefd: Store device channel index
can: kvaser_pciefd: Store the different firmware version components in a struct
can: kvaser_pciefd: Add intermediate variable for device struct in probe()
can: kvaser_pciefd: Add support for ethtool set_phys_id()
...
====================
Link: https://patch.msgid.link/20250725161327.4165174-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
libie: commonize adminq structure
Michal Swiatkowski says:
It is a prework to allow reusing some specific Intel code (eq. fwlog).
Move common *_aq_desc structure to libie header and changing
it in ice, ixgbe, i40e and iavf.
Only generic adminq commands can be easily moved to common header, as
rest is slightly different. Format remains the same. It will be better
to correctly move it when it will be needed to commonize other part of
the code.
Move *_aq_str() to new libie module (libie_adminq) and use it across
drivers. The functions are exactly the same in each driver. Some more
adminq helpers/functions can be moved to libie_adminq when needed.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: use libie_aq_str
iavf: use libie_aq_str
ice: use libie_aq_str
libie: add adminq helper for converting err to str
iavf: use libie adminq descriptors
i40e: use libie adminq descriptors
ixgbe: use libie adminq descriptors
ice, libie: move generic adminq descriptors to lib
====================
Link: https://patch.msgid.link/20250724182826.3758850-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.16-rc8
qup: avoid potential hang when waiting for bus idle
tegra: improve ACPI reset error handling
virtio: use interruptible wait to prevent hang during transfer
|
