summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-19Bluetooth: Use individual flags for certain management eventsMarcel Holtmann
Instead of hiding everything behind a general managment events flag, introduce indivdual flags that allow fine control over which events are send to a given management channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: mgmt: Fix sending redundant event for Advertising InstanceJohan Hedberg
When an Advertising Instance is removed, the Advertising Removed event shouldn't be sent to the same socket that issued the Remove Advertising command (it gets a command complete event instead). The mgmt_advertising_removed() function already has a parameter for skipping a specific socket, but there was no code to propagate the right value to this parameter. This patch fixes the issue by making sure the intermediate hci_req_clear_adv_instance() function gets the socket pointer. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add support for sending MGMT commands and events to monitorMarcel Holtmann
This adds support for tracing all management commands and events via the monitor interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Add support for sending MGMT open and close to monitorMarcel Holtmann
This sends new notifications to the monitor support whenever a management channel has been opened or closed. This allows tracing of control channels really easily. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Introduce helper to pack mgmt version informationMarcel Holtmann
The mgmt version information will be also needed for the control changell tracing feature. This provides a helper to pack them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Store control socket cookie and comm informationMarcel Holtmann
To further allow unique identification and tracking of control socket, store cookie and comm information when binding the socket. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Check SOL_HCI for raw socket optionsMarcel Holtmann
The SOL_HCI level should be enforced when using socket options on the HCI raw socket interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: bcm203x: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: btusb: Add support for 0cf3:e009Kai-Heng Feng
Device 0cf3:e009 is one of the QCA ROME family. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e009 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: add printf format attribute to hci_set_[fh]w_info()Nicolas Iooss
Commit 5177a83827cd ("Bluetooth: Add debugfs fields for hardware and firmware info") introduced hci_set_hw_info() and hci_set_fw_info(). These functions use kvasprintf_const() but are not marked with a __printf attribute. Adding such an attribute helps detecting issues related to printf-formatting at build time. Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: btusb, hci_intel: Fix wait_on_bit_timeout() return value checksBart Van Assche
wait_on_bit_timeout() returns one of the following three values: * 0 to indicate success. * -EINTR to indicate that a signal has been received; * -EAGAIN to indicate timeout; Make the wait_on_bit_timeout() callers check for these values. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driverBjorn Andersson
The Qualcomm WCNSS chip provides two SMD channels to the BT core; one for command and one for event packets. This driver exposes the two channels as a hci device. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add HCI device identifier for Qualcomm SMDBjorn Andersson
This patch assigns the next free HCI device identifier to Bluetooth devices based on the Qualcomm Shared Memory channels. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19mac802154: use rate limited warnings for malformed framesAristeu Rozanski
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19mac802154: don't warn on unsupported framesAristeu Rozanski
Just because we don't support certain types of frames yet doesn't mean we have to flood the message log with warnings about "invalid" frames. Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-196lowpan: ndisc: no overreact if no short address is availableAlexander Aring
This patch removes handling to remove short address for a neigbour entry if RS/RA/NS/NA doesn't contain a short address. If these messages doesn't has any short address option, the existing short address from ndisc cache will be used. The current behaviour will set that the neigbour doesn't has a short address anymore. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19mac802154: set phy net namespace for new ifacesAlexander Aring
This patch sets the net namespace when creating SoftMAC interfaces. This is important if the namespace at phy layer was switched before. Currently we losing interfaces in some namespace and it's not possible to recover that. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add combined LED trigger for controller powerMarcel Holtmann
Instead of just having a LED trigger for power on a specific controller, this adds the LED trigger "bluetooth-power" that combines the power states of all controllers into a single trigger. This simplifies the trigger selection and also supports multiple controllers per host system via a single LED. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Put led_trigger field behind CONFIG_BT_LEDSMarcel Holtmann
The led_trigger field in hci_dev should be conditional based on if CONFIG_BT_LEDS is set or not. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19MIPS: Select HAVE_REGS_AND_STACK_ACCESS_APIMarcin Nowakowski
Add lost Kconfig symbol. This should have been part of 40e084a506eb ('MIPS: Add uprobes support.'). Fixes: 40e084a506eb ('MIPS: Add uprobes support.') Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-19nvdimm: fix PHYS_PFN/PFN_PHYS mixupOliver O'Halloran
nd_activate_region() iomaps any hint addresses required when activating a region. To prevent duplicate mappings it checks the PFN of the hint to be mapped against the PFNs of the already mapped hints. Unfortunately it doesn't convert the PFN back into a physical address before passing it to devm_nvdimm_ioremap(). Instead it applies PHYS_PFN a second time which ends about as well as you would imagine. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-09-19[media] cx23885/saa7134: assign q->dev to the PCI deviceHans Verkuil
Fix a regression caused by commit 2bc46b3ad3c1 ("[media] media/pci: convert drivers to use the new vb2_queue dev field"). Three places where q->dev should be set were missed, causing a WARN. Fixes: 2bc46b3ad3c1 ("[media] media/pci: convert drivers to use the new vb2_queue dev field"). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Marton Balint <cus@passwd.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19MIPS: Octeon: Fix platform bus probingAaro Koskinen
Commit 44a7185c2ae6 ("of/platform: Add common method to populate default bus") added new arch_initcall of_platform_default_populate_init() that will override device_initcall octeon_publish_devices(). This broke many OCTEON boards as important devices are not getting probed anymore (e.g. on EdgeRouter Lite the USB mass storage/rootfs is missing). Fix by changing octeon_publish_devices() to arch_initcall. Fixes: 44a7185c2ae6 ("of/platform: Add common method to populate default bus") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Rob Herring <robh@kernel.org> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14041/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-19MIPS: Octeon: mangle-port: fix build failure with VDSO codeAaro Koskinen
Commit 1685ddbe35cd ("MIPS: Octeon: Changes to support readq()/writeq() usage.") added bitwise shift operations that assume that unsigned long is always 64-bits. This broke the build of VDSO code, as it gets compiled also in "faked" 32-bit mode. Althought the failing inline functions are never executed in 32-bit mode, they still need to pass the compilation. Fix by using 64-bit types explicitly. The patch fixes the following build failure: CC arch/mips/vdso/gettimeofday-o32.o In file included from los/git/devel/linux/arch/mips/include/asm/io.h:32:0, from los/git/devel/linux/arch/mips/include/asm/page.h:194, from los/git/devel/linux/arch/mips/vdso/vdso.h:26, from los/git/devel/linux/arch/mips/vdso/gettimeofday.c:11: los/git/devel/linux/arch/mips/include/asm/mach-cavium-octeon/mangle-port.h: In function '__should_swizzle_bits': los/git/devel/linux/arch/mips/include/asm/mach-cavium-octeon/mangle-port.h:19:40: error: right shift count >= width of type [-Werror=shift-count-overflow] unsigned long did = ((unsigned long)a >> 40) & 0xff; ^~ Fixes: 1685ddbe35cd ("MIPS: Octeon: Changes to support readq()/writeq() usage.") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <ddaney@caviumnetworks.com> Cc: David Daney <david.daney@cavium.com> Cc: Steven J. Hill <steven.hill@cavium.com> Cc: Alex Smith <alex.smith@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14039/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-19MIPS: Avoid a BUG warning during prctl(PR_SET_FP_MODE, ...)Marcin Nowakowski
cpu_has_fpu macro uses smp_processor_id() and is currently executed with preemption enabled, that triggers the warning at runtime. It is assumed throughout the kernel that if any CPU has an FPU, then all CPUs would have an FPU as well, so it is safe to perform the check with preemption enabled - change the code to use raw_ variant of the check to avoid the warning. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 4.0+ Patchwork: https://patchwork.linux-mips.org/patch/14125/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-19can: flexcan: fix resume functionFabio Estevam
On a imx6ul-pico board the following error is seen during system suspend: dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110 PM: Device 2090000.flexcan failed to resume: error -110 The reason for this suspend error is because when the CAN interface is not active the clocks are disabled and then flexcan_chip_enable() will always fail due to a timeout error. In order to fix this issue, only call flexcan_chip_enable/disable() when the CAN interface is active. Based on a patch from Dong Aisheng in the NXP kernel. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-09-19xfrm: Fix memory leak of aead algorithm nameIlan Tayari
commit 1a6509d99122 ("[IPSEC]: Add support for combined mode algorithms") introduced aead. The function attach_aead kmemdup()s the algorithm name during xfrm_state_construct(). However this memory is never freed. Implementation has since been slightly modified in commit ee5c23176fcc ("xfrm: Clone states properly on migration") without resolving this leak. This patch adds a kfree() call for the aead algorithm name. Fixes: 1a6509d99122 ("[IPSEC]: Add support for combined mode algorithms") Signed-off-by: Ilan Tayari <ilant@mellanox.com> Acked-by: Rami Rosen <roszenrami@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-09-19mtd: nand: mxc: fix obiwan error in mxc_nand_v[12]_ooblayout_free() functionsLothar Waßmann
commit a894cf6c5a82 ("mtd: nand: mxc: switch to mtd_ooblayout_ops") introduced a regression accessing the OOB area from the mxc_nand driver due to an Obiwan error in the mxc_nand_v[12]_ooblayout_free() functions. They report a bogus oobregion { 64, 7 } which leads to errors accessing bogus data when reading the oob area. Prior to the commit the mtd-oobtest module could be run without any errors. With the offending commit, this test fails with results like: |Running mtd-oobtest | |================================================= |mtd_oobtest: MTD device: 5 |mtd_oobtest: MTD device size 524288, eraseblock size 131072, page size 2048, count of eraseblocks 4, pages per eraseblock 64, OOB size 64 |mtd_test: scanning for bad eraseblocks |mtd_test: scanned 4 eraseblocks, 0 are bad |mtd_oobtest: test 1 of 5 |mtd_oobtest: writing OOBs of whole device |mtd_oobtest: written up to eraseblock 0 |mtd_oobtest: written 4 eraseblocks |mtd_oobtest: verifying all eraseblocks |mtd_oobtest: error @addr[0x0:0x19] 0x9a -> 0x78 diff 0xe2 |mtd_oobtest: error @addr[0x0:0x1a] 0xcc -> 0x0 diff 0xcc |mtd_oobtest: error @addr[0x0:0x1b] 0xe0 -> 0x85 diff 0x65 |mtd_oobtest: error @addr[0x0:0x1c] 0x60 -> 0x62 diff 0x2 |mtd_oobtest: error @addr[0x0:0x1d] 0x69 -> 0x45 diff 0x2c |mtd_oobtest: error @addr[0x0:0x1e] 0xcd -> 0xa0 diff 0x6d |mtd_oobtest: error @addr[0x0:0x1f] 0xf2 -> 0x60 diff 0x92 |mtd_oobtest: error: verify failed at 0x0 [...] Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Fixes: a894cf6c5a82 ("mtd: nand: mxc: switch to mtd_ooblayout_ops") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-19mtd: nand: fix chances to create incomplete ECC data when writingRogerCC Lin
When mtk_nfc_do_write_page() comparing the sector number,because the sector number field is at the 12th-bit position of NFI_BYTELEN register,the masked register should be shifted 12 bits before being compared.The result of this bug may cause the second subpage has incomplete ECC parity bytes. Signed-off-by: RogerCC Lin <rogercc.lin@mediatek.com> Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-19mtd: nand: fix generating over-boundary ECC data when writingRogerCC Lin
When mtk_ecc_encode() is writing the ECC parity data to the OOB region,because each register is 4 bytes in length,but the len's unit is in bytes,the operation in the for loop will cross the ECC's boundary. Signed-off-by: RogerCC Lin <rogercc.lin@mediatek.com> Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-19genirq: Skip chained interrupt trigger setup if type is IRQ_TYPE_NONEMarc Zyngier
There is no point in trying to configure the trigger of a chained interrupt if no trigger information has been configured. At best this is ignored, and at the worse this confuses the underlying irqchip (which is likely not to handle such a thing), and unnecessarily alarms the user. Only apply the configuration if type is not IRQ_TYPE_NONE. Fixes: 1e12c4a9393b ("genirq: Correctly configure the trigger on chained interrupts") Reported-and-tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/CAMuHMdVW1eTn20=EtYcJ8hkVwohaSuH_yQXrY2MGBEvZ8fpFOg@mail.gmail.com Link: http://lkml.kernel.org/r/1474274967-15984-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-19iwlwifi: pcie: use LIST_HEAD() macroJohannes Berg
There's no need to declare a list and then init it manually, just use the LIST_HEAD() macro. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: use LIST_HEAD() macroJohannes Berg
There's no need to declare a list and then init it manually, just use the LIST_HEAD() macro. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: set HCMD_NAME for PHY_DB as wellSara Sharon
Currently it is logged as UNKNOWN. Also, 0x6c seems to be the permanent ID for this command, remove incorrect comment and uncomment the command from the commands list. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: Add mem debugfs entryIdo Yariv
In order to access cached/paged memory, there are a couple of firmware commands (one for UMAC and one for LMAC) that let the host access memory and registers indirectly. Since this is done by the firmware on behalf of the host, even if memory is paged out or cached, the host will retrieve the memory as the firmware sees it (paged out memory will get paged in). Export this mechanism via a debugfs entry for both read and write access. WARNING: This mechanism has no protections at all. Invalid addresses may crash or hang the firmware. Writing to arbitrary memory also comes with no guarantees. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: move AP-specific code to right functionJohannes Berg
There's no need for the common MAC context function to have an if on AP mode, the values can be overridden in the AP-specific function later. Clean that up by adding the full command as a new parameter to the AP-specific function, and doing it there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: add new 8265 series PCI IDOren Givon
Add a new PCI ID for the 8265 series. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: Add debugfs function for clocks diffRoee Zamir
New function, reveals the diff between gp2 and host time. Signed-off-by: Roee Zamir <roee.zamir@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19drm: Only use compat ioctl for addfb2 on X86/IA64Kristian H. Kristensen
Similar to struct drm_update_draw, struct drm_mode_fb_cmd2 has an unaligned 64 bit field (modifier). This get packed differently between 32 bit and 64 bit modes on architectures that can handle unaligned 64 bit access (X86 and IA64). Other architectures pack the structs the same and don't need the compat wrapper. Use the same condition for drm_mode_fb_cmd2 as we use for drm_update_draw. Note that only the modifier will be packed differently between compat and non-compat versions. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org> [seanpaul added not at bottom of commit msg re: modifier] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1473801645-116011-1-git-send-email-hoegsberg@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-09-19iwlwifi: migrate to devm_* APISharon Dvir
Change PCIE and trans resource allocations to managed resources. Signed-off-by: Sharon Dvir <sharon.dvir@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: disable P2P queue on mac context releaseSara Sharon
AP queue is properly released, but P2P queue isn't. Fixes: commit 4c965139a3cd ("iwlwifi: mvm: support p2p device frames tx on dqa queue #2") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: don't export trace points that are used in iwlwifi onlyEmmanuel Grumbach
This can save a few bytes Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: document passing unexpected Block Ack Request framesJohannes Berg
When we get an unexpected Block Ack Request frame, the BAID from the hardware will be invalid, and we'll pass it to mac80211 for further handling (sending a delBA action frame.) Add a comment explaining that, in case anyone looks in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: move to wide ID for all commandsSara Sharon
Due to firmware design considerations, move to wide ID for all commands. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: make iwl_mvm_update_sta() an inlineJohannes Berg
There's no point in making this an out-of-line function since it just calls a single other function with a few changed parameters. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: pcie: log full command sequenceSara Sharon
Log group as well. Remove 0x prefix to match TX logging. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: move BIOS MCC retrieval to common codeArik Nemtsov
This will be used by more than MVM, so move it to iwlwifi While at it, rename WRD_METHOD to the more appropriate WRDD_METHOD and add some documentation. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: support packet injectionSara Sharon
For automatic testing packet injection can be useful. Support injection through debugfs. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: Add support for RRM by scanAvrahams Stern
Implement support for RRM by adding an option to configure the scan dwell time and reporting scan start time and BSS detection time, and Advertise support for these features. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-19iwlwifi: mvm: support BAR in reorder bufferSara Sharon
On default queue we will not receive frame release notification, but the BAR itself. Upon receiving the BAR driver should look at the NSSN and adjust window accordingly. Fixes: b915c10174fb ("iwlwifi: mvm: add reorder buffer per queue") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit (git 2.34.1) at 2025-09-29 22:56:34 +0000