summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-21dmaengine: Add support for reporting DMA cached data amountPeter Ujfalusi
A DMA hardware can have big cache or FIFO and the amount of data sitting in the DMA fabric can be an interest for the clients. For example in audio we want to know the delay in the data flow and in case the DMA have significantly large FIFO/cache, it can affect the latenc/delay Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20191223110458.30766-6-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: Add metadata_ops for dma_async_tx_descriptorPeter Ujfalusi
The metadata is best described as side band data or parameters traveling alongside the data DMAd by the DMA engine. It is data which is understood by the peripheral and the peripheral driver only, the DMA engine see it only as data block and it is not interpreting it in any way. The metadata can be different per descriptor as it is a parameter for the data being transferred. If the DMA supports per descriptor metadata it can implement the attach, get_ptr/set_len callbacks. Client drivers must only use either attach or get_ptr/set_len to avoid misconfiguration. Client driver can check if a given metadata mode is supported by the channel during probe time with dmaengine_is_metadata_mode_supported(chan, DESC_METADATA_CLIENT); dmaengine_is_metadata_mode_supported(chan, DESC_METADATA_ENGINE); and based on this information can use either mode. Wrappers are also added for the metadata_ops. To be used in DESC_METADATA_CLIENT mode: dmaengine_desc_attach_metadata() To be used in DESC_METADATA_ENGINE mode: dmaengine_desc_get_metadata_ptr() dmaengine_desc_set_metadata_len() Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20191223110458.30766-5-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: doc: Add sections for per descriptor metadata supportPeter Ujfalusi
Update the provider and client documentation with details about the metadata support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20191223110458.30766-4-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21Merge TI ringacc driver from SantoshVinod Koul
This is for dependency of new TI ringacc dmaengine drivers Merge tag 'drivers_soc_for_5.6' into topic/ti SOC: TI Keystone Ring Accelerator driver The Ring Accelerator (RINGACC or RA) provides hardware acceleration to enable straightforward passing of work between a producer and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs. Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21scsi: RDMA/isert: Fix a recently introduced regression related to logoutBart Van Assche
iscsit_close_connection() calls isert_wait_conn(). Due to commit e9d3009cb936 both functions call target_wait_for_sess_cmds() although that last function should be called only once. Fix this by removing the target_wait_for_sess_cmds() call from isert_wait_conn() and by only calling isert_wait_conn() after target_wait_for_sess_cmds(). Fixes: e9d3009cb936 ("scsi: target: iscsi: Wait for all commands to finish before freeing a session"). Link: https://lore.kernel.org/r/20200116044737.19507-1-bvanassche@acm.org Reported-by: Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: fnic: do not queue commands during fwresetHannes Reinecke
When a link is going down the driver will be calling fnic_cleanup_io(), which will traverse all commands and calling 'done' for each found command. While the traversal is handled under the host_lock, calling 'done' happens after the host_lock is being dropped. As fnic_queuecommand_lck() is being called with the host_lock held, it might well be that it will pick the command being selected for abortion from the above routine and enqueue it for sending, but then 'done' is being called on that very command from the above routine. Which of course confuses the hell out of the scsi midlayer. So fix this by not queueing commands when fnic_cleanup_io is active. Link: https://lore.kernel.org/r/20200116102053.62755-1-hare@suse.de Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20Input: pm8xxx-vib - fix handling of separate enable registerStephan Gerhold
Setting the vibrator enable_mask is not implemented correctly: For regmap_update_bits(map, reg, mask, val) we give in either regs->enable_mask or 0 (= no-op) as mask and "val" as value. But "val" actually refers to the vibrator voltage control register, which has nothing to do with the enable_mask. So we usually end up doing nothing when we really wanted to enable the vibrator. We want to set or clear the enable_mask (to enable/disable the vibrator). Therefore, change the call to always modify the enable_mask and set the bits only if we want to enable the vibrator. Fixes: d4c7c5c96c92 ("Input: pm8xxx-vib - handle separate enable register") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200114183442.45720-1-stephan@gerhold.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-01-20io_uring: fix compat for IORING_REGISTER_FILES_UPDATEEugene Syromiatnikov
fds field of struct io_uring_files_update is problematic with regards to compat user space, as pointer size is different in 32-bit, 32-on-64-bit, and 64-bit user space. In order to avoid custom handling of compat in the syscall implementation, make fds __u64 and use u64_to_user_ptr in order to retrieve it. Also, align the field naturally and check that no garbage is passed there. Fixes: c3a31e605620c279 ("io_uring: add support for IORING_REGISTER_FILES_UPDATE") Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-20tracing: Do not set trace clock if tracefs lockdown is in effectMasami Ichikawa
When trace_clock option is not set and unstable clcok detected, tracing_set_default_clock() sets trace_clock(ThinkPad A285 is one of case). In that case, if lockdown is in effect, null pointer dereference error happens in ring_buffer_set_clock(). Link: http://lkml.kernel.org/r/20200116131236.3866925-1-masami256@gmail.com Cc: stable@vger.kernel.org Fixes: 17911ff38aa58 ("tracing: Add locked_down checks to the open calls of files created for tracefs") Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1788488 Signed-off-by: Masami Ichikawa <masami256@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-20tracing: Fix histogram code when expression has same var as valueSteven Rostedt (VMware)
While working on a tool to convert SQL syntex into the histogram language of the kernel, I discovered the following bug: # echo 'first u64 start_time u64 end_time pid_t pid u64 delta' >> synthetic_events # echo 'hist:keys=pid:start=common_timestamp' > events/sched/sched_waking/trigger # echo 'hist:keys=next_pid:delta=common_timestamp-$start,start2=$start:onmatch(sched.sched_waking).trace(first,$start2,common_timestamp,next_pid,$delta)' > events/sched/sched_switch/trigger Would not display any histograms in the sched_switch histogram side. But if I were to swap the location of "delta=common_timestamp-$start" with "start2=$start" Such that the last line had: # echo 'hist:keys=next_pid:start2=$start,delta=common_timestamp-$start:onmatch(sched.sched_waking).trace(first,$start2,common_timestamp,next_pid,$delta)' > events/sched/sched_switch/trigger The histogram works as expected. What I found out is that the expressions clear out the value once it is resolved. As the variables are resolved in the order listed, when processing: delta=common_timestamp-$start The $start is cleared. When it gets to "start2=$start", it errors out with "unresolved symbol" (which is silent as this happens at the location of the trace), and the histogram is dropped. When processing the histogram for variable references, instead of adding a new reference for a variable used twice, use the same reference. That way, not only is it more efficient, but the order will no longer matter in processing of the variables. From Tom Zanussi: "Just to clarify some more about what the problem was is that without your patch, we would have two separate references to the same variable, and during resolve_var_refs(), they'd both want to be resolved separately, so in this case, since the first reference to start wasn't part of an expression, it wouldn't get the read-once flag set, so would be read normally, and then the second reference would do the read-once read and also be read but using read-once. So everything worked and you didn't see a problem: from: start2=$start,delta=common_timestamp-$start In the second case, when you switched them around, the first reference would be resolved by doing the read-once, and following that the second reference would try to resolve and see that the variable had already been read, so failed as unset, which caused it to short-circuit out and not do the trigger action to generate the synthetic event: to: delta=common_timestamp-$start,start2=$start With your patch, we only have the single resolution which happens correctly the one time it's resolved, so this can't happen." Link: https://lore.kernel.org/r/20200116154216.58ca08eb@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 067fe038e70f6 ("tracing: Add variable reference handling to hist triggers") Reviewed-by: Tom Zanuss <zanussi@kernel.org> Tested-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-20Merge tag 'fixes_for_v5.5-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull reiserfs fix from Jan Kara: "A fixup of a recently merged reiserfs fix which has caused problem when xattrs were not compiled in" * tag 'fixes_for_v5.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: reiserfs: fix handling of -EOPNOTSUPP in reiserfs_for_each_xattr
2020-01-20regulator: core: Fix exported symbols to the exported GPL versionEnric Balletbo i Serra
Change the exported symbols introduced by commit e9153311491da ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage") from EXPORT_SYMBOL() to EXPORT_SYMBOL_GPL(), like is used for all the core parts. Fixes: e9153311491da ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage") Reported-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20200120123921.1204339-1-enric.balletbo@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-20netfilter: ipset: use bitmap infrastructure completelyKadlecsik József
The bitmap allocation did not use full unsigned long sizes when calculating the required size and that was triggered by KASAN as slab-out-of-bounds read in several places. The patch fixes all of them. Reported-by: syzbot+fabca5cbf5e54f3fe2de@syzkaller.appspotmail.com Reported-by: syzbot+827ced406c9a1d9570ed@syzkaller.appspotmail.com Reported-by: syzbot+190d63957b22ef673ea5@syzkaller.appspotmail.com Reported-by: syzbot+dfccdb2bdb4a12ad425e@syzkaller.appspotmail.com Reported-by: syzbot+df0d0f5895ef1f41a65b@syzkaller.appspotmail.com Reported-by: syzbot+b08bd19bb37513357fd4@syzkaller.appspotmail.com Reported-by: syzbot+53cdd0ec0bbabd53370a@syzkaller.appspotmail.com Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-20selinux: fix regression introduced by move_mount(2) syscallStephen Smalley
commit 2db154b3ea8e ("vfs: syscall: Add move_mount(2) to move mounts around") introduced a new move_mount(2) system call and a corresponding new LSM security_move_mount hook but did not implement this hook for any existing LSM. This creates a regression for SELinux with respect to consistent checking of mounts; the existing selinux_mount hook checks mounton permission to the mount point path. Provide a SELinux hook implementation for move_mount that applies this same check for consistency. In the future we may wish to add a new move_mount filesystem permission and check as well, but this addresses the immediate regression. Fixes: 2db154b3ea8e ("vfs: syscall: Add move_mount(2) to move mounts around") Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-01-20hsr: Fix a compilation errorxiaofeng.yan
A compliation error happen when building branch 5.5-rc7 In file included from net/hsr/hsr_main.c:12:0: net/hsr/hsr_main.h:194:20: error: two or more data types in declaration specifiers static inline void void hsr_debugfs_rename(struct net_device *dev) So Removed one void. Fixes: 4c2d5e33dcd3 ("hsr: rename debugfs file when interface name is changed") Signed-off-by: xiaofeng.yan <yanxiaofeng7@jd.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20mmc: sdhci-of-esdhc: fix serious issue clock is always disabledYangbo Lu
This patch is to fix a serious issue that clock is always disabled in esdhc_of_set_clock(). Fixes: 1b21a701aed9 ("mmc: sdhci-of-esdhc: fix clock setting for different controller versions") Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Link: https://lore.kernel.org/r/20200120094835.28050-1-yangbo.lu@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-of-esdhc: fix transfer mode register readingYangbo Lu
The standard SD controller uses two 16-bit registers for command sending. 0xC: Transfer Mode Register 0xE: Command Register But the eSDHC controller uses one 32-bit register instead. 0xC: XFERTYPE For Transfer Mode Register and Command Register writing, the eSDHC driver will store Transfer Mode Register value in a variable first. When Command Register writing happens, driver will directly write a 32-bit value into XFERTYPE register. But for Transfer Mode Register reading, driver just returns a actual value. This may cause issue for some read-modify-write operations. We should make both reading and write on that variable for Transfer Mode Register. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Link: https://lore.kernel.org/r/20200117063858.37296-1-yangbo.lu@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-brcmstb: Fix incorrect switch to HS modeAl Cooper
When switching from any MMC speed mode that requires 1.8v (HS200, HS400 and HS400ES) to High Speed (HS) mode, the system ends up configured for SDR12 with a 50MHz clock which is an illegal mode. This happens because the SDHCI_CTRL_VDD_180 bit in the SDHCI_HOST_CONTROL2 register is left set and when this bit is set, the speed mode is controlled by the SDHCI_CTRL_UHS field in the SDHCI_HOST_CONTROL2 register. The SDHCI_CTRL_UHS field will end up being set to 0 (SDR12) by sdhci_set_uhs_signaling() because there is no UHS mode being set. The fix is to change sdhci_set_uhs_signaling() to set the SDHCI_CTRL_UHS field to SDR25 (which is the same as HS) for any switch to HS mode. This was found on a new eMMC controller that does strict checking of the speed mode and the corresponding clock rate. It caused the switch to HS400 mode to fail because part of the sequence to switch to HS400 requires a switch from HS200 to HS before going to HS400. This issue was previously fixed by commit c894e33ddc191 ("mmc: sdhci: Fix incorrect switch to HS mode") and later removed by commit 07bcc411567c ("Revert \"mmc: sdhci: Fix incorrect switch to HS mode\"") because it caused failures with some SD cards on AM65X systems. The fix will now be done in a platform specific callback instead of common sdhci code. Signed-off-by: Al Cooper <alcooperx@gmail.com> Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200113210706.11972-7-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)Al Cooper
The latest Arasan controller first used in the 7216 now supports CQE so enable this feature. Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20200113210706.11972-6-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-brcmstb: Add shutdown callbackAl Cooper
Shutdown controller and disable it's clocks to insure max power savings in S5 on systems that leave power on. Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20200113210706.11972-5-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-brcmstb: Fix driver to defer on clk_get deferAl Cooper
The new SCMI clock protocol driver does not get probed that early in boot. Brcmstb drivers typically have the following code when getting a clock: priv->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(priv->clk)) { dev_err(&pdev->dev, "Clock not found in Device Tree\n"); priv->clk = NULL; } This commit changes the driver to do what is below. priv->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(priv->clk)) { if (PTR_ERR(priv->clk) == -EPROBE_DEFER) return -EPROBE_DEFER; dev_err(&pdev->dev, "Clock not found in Device Tree\n"); priv->clk = NULL; } Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20200113210706.11972-4-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-brcmstb: Add ability to use HS400ES transfer modeAl Cooper
The latest eMMC JEDEC specification version 5.1 added a new transfer mode, HS400 with enhanced strobe (HS400ES). This mode will be selected if both the host controller and eMMC device support it. The latest Arasan 5.1 controller in the 7216a0 supports this mode. The "Host Controller Specification" has not been updated so the controller register bit used to enable this mode is not specified and varies the with controller vendor. The Linux SDHCI driver supplies a callback for enabling HS400ES mode and that callback will be used to supply a routine that will set the proper bit in the Arasan Vendor register. Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20200113210706.11972-3-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0Al Cooper
Add 7216b0 with supports CQE, HS400, HS400-ES and SDR104. Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20200113210706.11972-2-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: core: limit probe clock frequency to configured f_maxMichał Mirosław
Currently MMC core disregards host->f_max during card initialization phase. Obey upper boundary for the clock frequency and skip faster speeds when they are above the limit. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/f471bceaf237d582d746bd289c4c4f3639cb7b45.1577962382.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-milbeaut: Remove redundant platform_get_irq error messageYueHaibing
platform_get_irq() will call dev_err() itself on failure, so there is no need for the driver to also do this. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116144322.57308-1-yuehaibing@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci: fix an issue of mixing different typesChunyan Zhang
Fix an issue reported by sparse, since mixed types of parameters are used on calling dmaengine_prep_slave_sg(). Fixes: 36e1da441fec (mmc: sdhci: add support for using external DMA devices) Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200120033223.897-1-zhang.chunyan@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20Merge branch 'fixes' into nextUlf Hansson
2020-01-20platform/x86: asus-nb-wmi: Support left round button on N56VBPaul Cercueil
The N56VB laptop has a round button located on the left side above the keyboard. Map it to F13 since it does not have any predeterminated purpose. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20tools/power/x86/intel-speed-select: Update versionSrinivas Pandruvada
As we added new set of mailbox commands, increment version. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20tools/power/x86/intel-speed-select: Change the order for clos disableSrinivas Pandruvada
In turbo-freq or base-freq auto mode, for disable, first disable the feature and then disable clos. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20tools/power/x86/intel-speed-select: Fix result display for turbo-freq auto modeSrinivas Pandruvada
The turbo-freq enable with auto mode, prints result for the last possible CPU, which is not correct when either CPU is not present or user wants command to be limited to a single die/package. For example, in the below command user wants to limit to die/package 0, but the "turbo-freq --auto" result is displayed using the other package. $ sudo intel-speed-select -c 0 turbo-freq enable -a Intel(R) Speed Select Technology package-0 die-0 cpu-0 turbo-freq enable:success package--1 die-0 cpu-31 turbo-freq --auto enable:success Since we do have to traverse all CPUs, don't display CPU info for "turbo-freq --auto", as we already displayed the result for turbo-freq enable with the CPU information. With the fix, the same command results in: $ sudo intel-speed-select -c 0 turbo-freq enable -a Intel(R) Speed Select Technology package-0 die-0 cpu-0 turbo-freq enable:success turbo-freq --auto enable:success Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20tools/power/x86/intel-speed-select: Add support for core-power discoverySrinivas Pandruvada
It is possible that BIOS may not enable core-power feature. In this case this additional interface will allow to enable from this utility. Also the information dump, includes the current status of core-power. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20platform/x86: ISST: Allow additional core-power mailbox commandsSrinivas Pandruvada
To discover core-power capability, some new mailbox commands are added. Allow those commands to execute. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20mmc: sdhci: fix minimum clock rate for v3 controllerMichał Mirosław
For SDHCIv3+ with programmable clock mode, minimal clock frequency is still base clock / max(divider). Minimal programmable clock frequency is always greater than minimal divided clock frequency. Without this patch, SDHCI uses out-of-spec initial frequency when multiplier is big enough: mmc1: mmc_rescan_try_freq: trying to init card at 468750 Hz [for 480 MHz source clock divided by 1024] The code in sdhci_calc_clk() already chooses a correct SDCLK clock mode. Fixes: c3ed3877625f ("mmc: sdhci: add support for programmable clock mode") Cc: <stable@vger.kernel.org> # 4f6aa3264af4: mmc: tegra: Only advertise UHS modes if IO regulator is present Cc: <stable@vger.kernel.org> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/ffb489519a446caffe7a0a05c4b9372bd52397bb.1579082031.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-omap: Add special reset capabilityFaiz Abbas
Some omap controllers need software to monitor a 0->1->0 for software reset. Add a SDHCI_OMAP_SPECIAL_RESET flag to indicate this. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-11-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-omap: Add am335x and am437x specific compatiblesFaiz Abbas
Add support for new compatible for TI's am335x and am437x devices. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-10-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20dt-bindings: sdhci-omap: Add am335x and am437x specific bindingsFaiz Abbas
Add binding for the TI's sdhci-omap controller present in am335x and am437x devices. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200116105154.7685-9-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-omap: Disable data timeout interrupt during eraseFaiz Abbas
Disable data timeout interrupt during an erase operation. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-8-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci: Refactor sdhci_set_timeout()Faiz Abbas
Refactor sdhci_set_timeout() such that platform drivers can do some functionality in a set_timeout() callback and then call __sdhci_set_timeout() to complete the operation. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-7-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci: Convert sdhci_set_timeout_irq() to non-staticFaiz Abbas
Export sdhci_set_timeout_irq() so that it is accessible from platform drivers. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-6-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-omap: Add using external dmaChunyan Zhang
sdhci-omap can support both external dma controller via dmaengine framework as well as ADMA which standard SD host controller provides. Fixes by Faiz Abbas <fazi_abbas@ti.com>: 1. Switch to DMA slave mode when using external DMA 2. Add offset to mapbase Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-5-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci: add support for using external DMA devicesChunyan Zhang
Some standard SD host controllers can support both external dma controllers as well as ADMA/SDMA in which the SD host controller acts as DMA master. TI's omap controller is the case as an example. Currently the generic SDHCI code supports ADMA/SDMA integrated in the host controller but does not have any support for external DMA controllers implemented using dmaengine, meaning that custom code is needed for any systems that use an external DMA controller with SDHCI. Fixes by Faiz Abbas <faiz_abbas@ti.com>: 1. Map scatterlists before dmaengine_prep_slave_sg() 2. Use dma_async() functions inside of the send_command() path and call terminate_sync() in non-atomic context in case of an error. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-4-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci: Factor out some operations set to their own functionsFaiz Abbas
In preparation for adding external dma support, factor out data initialization, block info and mrq_done to their own functions. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-3-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20dt-bindings: sdhci-omap: Add properties for using external dmaChunyan Zhang
sdhci-omap can support both external dma controller via dmaengine framework as well as ADMA which standard SD host controller provides. Add binding documentation for these external dma properties. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200116105154.7685-2-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20dt-bindings: mmc: fsl-imx-esdhc: add i.MX8MP compatible stringAnson Huang
Add compatible string for imx8mp Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1578893602-14395-2-git-send-email-Anson.Huang@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20net: ip6_gre: fix moving ip6gre between namespacesNiko Kortstrom
Support for moving IPv4 GRE tunnels between namespaces was added in commit b57708add314 ("gre: add x-netns support"). The respective change for IPv6 tunnels, commit 22f08069e8b4 ("ip6gre: add x-netns support") did not drop NETIF_F_NETNS_LOCAL flag so moving them from one netns to another is still denied in IPv6 case. Drop NETIF_F_NETNS_LOCAL flag from ip6gre tunnels to allow moving ip6gre tunnel endpoints between network namespaces. Signed-off-by: Niko Kortstrom <niko.kortstrom@nokia.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcountchenqiwu
brcm_avs_cpufreq_get() calls cpufreq_cpu_get() to get the cpufreq policy, meanwhile, it also increments the kobject reference count to mark it busy. However, a corresponding call of cpufreq_cpu_put() is ignored to decrement the kobject reference count back, which may lead to a potential stuck risk that the cpuhp thread deadly waits for dropping of kobject refcount when cpufreq policy free. With this patch, the cpuhp thread can be easily exercised by attempting to force an unbind of the CPUfreq driver. Signed-off-by: chenqiwu <chenqiwu@xiaomi.com> [ Viresh: Dropped !policy check ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-01-19Linux 5.5-rc7v5.5-rc7Linus Torvalds
2020-01-19Merge tag 'riscv/for-v5.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "Three fixes for RISC-V: - Don't free and reuse memory containing the code that CPUs parked at boot reside in. - Fix rv64 build problems for ubsan and some modules by adding logical and arithmetic shift helpers for 128-bit values. These are from libgcc and are similar to what's present for ARM64. - Fix vDSO builds to clean up their own temporary files" * tag 'riscv/for-v5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Less inefficient gcc tishift helpers (and export their symbols) riscv: delete temporary files riscv: make sure the cores stay looping in .Lsecondary_park
2020-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix non-blocking connect() in x25, from Martin Schiller. 2) Fix spurious decryption errors in kTLS, from Jakub Kicinski. 3) Netfilter use-after-free in mtype_destroy(), from Cong Wang. 4) Limit size of TSO packets properly in lan78xx driver, from Eric Dumazet. 5) r8152 probe needs an endpoint sanity check, from Johan Hovold. 6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from John Fastabend. 7) hns3 needs short frames padded on transmit, from Yunsheng Lin. 8) Fix netfilter ICMP header corruption, from Eyal Birger. 9) Fix soft lockup when low on memory in hns3, from Yonglong Liu. 10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan. 11) Fix memory leak in act_ctinfo, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) cxgb4: reject overlapped queues in TC-MQPRIO offload cxgb4: fix Tx multi channel port rate limit net: sched: act_ctinfo: fix memory leak bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal. bnxt_en: Fix ipv6 RFS filter matching logic. bnxt_en: Fix NTUPLE firmware command failures. net: systemport: Fixed queue mapping in internal ring map net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec net: dsa: sja1105: Don't error out on disabled ports with no phy-mode net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset net: hns: fix soft lockup when there is not enough memory net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key() net/sched: act_ife: initalize ife->metalist earlier netfilter: nat: fix ICMP header corruption on ICMP errors net: wan: lapbether.c: Use built-in RCU list checking netfilter: nf_tables: fix flowtable list del corruption netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks() netfilter: nf_tables: remove WARN and add NLA_STRING upper limits netfilter: nft_tunnel: ERSPAN_VERSION must not be null netfilter: nft_tunnel: fix null-attribute check ...
generated by cgit (git 2.34.1) at 2025-09-12 14:58:12 +0000