summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-28xen-netfront: request Tx response events more oftenMalcolm Crossley
Trying to batch Tx response events results in poor performance because this delays freeing the transmitted skbs. Instead use the standard RING_FINAL_CHECK_FOR_RESPONSES() macro to be notified once the next Tx response is placed on the ring. Signed-off-by: Malcolm Crossley <malcolm.crossley@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28net: mv643xx_eth: fix packet corruption with TSO and tiny unaligned packets.Nicolas Schichan
The code in txq_put_data() would use txq->tx_curr_desc to index the tso_hdrs/tso_hdrs_dma buffers, for less than 8 bytes unaligned fragments, which is already moved to the next descriptor at the beginning of the function. If that fragment was the last of the the skb, the next skb would use that same space to place the ip headers, overwritting that small fragment data. Fixes: 91986fd3d335 (net: mv643xx_eth: Ensure proper data alignment in TSO TX path) Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Reviewed-by: Philipp Kirchhofer <philipp@familie-kirchhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28of: of_mdio: Ensure mdio device is a PHYAndrew Lunn
of_phy_find_device() is used to find the phy device associated with a device node. It is expected the node is for a PHY device, but in fact it could of been probed as a generic MDIO device. Ensure the device is a PHY before returning it. Fixes: a9049e0c513c ("mdio: Add support for mdio drivers.") Reported-by: Aaro Koskinen <aaro.koskinen@nokia.com> Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28Merge tag 'mac80211-for-davem-2016-01-26' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Here's a first set of fixes for the 4.5-rc cycle: * make regulatory messages much less verbose by default * various remain-on-channel fixes * scheduled scanning fixes with hardware restart * a PS-Poll handling fix; was broken just recently * bugfix to avoid buffering non-bufferable MMPDUs * world regulatory domain data fix * a fix for scanning causing other work to get stuck * hwsim: revert an older problematic patch that caused some userspace tools to have issues - not that big a deal as it's a debug only driver though ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29Merge branch 'drm-rockchip-next-fixes-2016-01-22' of ↵Dave Airlie
https://github.com/markyzq/kernel-drm-rockchip into drm-fixes Here are some fixes for drm/rockchip, these fixes base on drm-next. These fixes works on my popmetal(rk3288) board. About patch: drm/atomic-helper: Export framebuffer_changed() Daniel Vetter ack for merging it through rockchip git trees, so framebuffer_changed() can be reused by drm/rockchip. All others looks good, so I'd like you can land them. * 'drm-rockchip-next-fixes-2016-01-22' of https://github.com/markyzq/kernel-drm-rockchip: drm/rockchip: respect CONFIG_DRM_FBDEV_EMULATION drm/rockchip: fix wrong pitch/size using on gem drm/rockchip: explain why we can't wait_for_vblanks drm/rockchip: don't wait for vblank if fb hasn't changed drm/atomic-helper: Export framebuffer_changed() drm/rockchip/dsi: fix handling mipi_dsi_pixel_format_to_bpp result drm/rockchip: vop: fix mask when updating interrupts drm/rockchip: cleanup unnecessary export symbol drm/rockchip: Don't build rockchip_drm_vop as modules
2016-01-29drm/vmwgfx: respect 'nomodeset'Rob Clark
Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-01-28net: Fix dependencies for !HAS_IOMEM archsRichard Weinberger
Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28tcp: fix tcp_mark_head_lost to check skb len before fragmentingNeal Cardwell
This commit fixes a corner case in tcp_mark_head_lost() which was causing the WARN_ON(len > skb->len) in tcp_fragment() to fire. tcp_mark_head_lost() was assuming that if a packet has tcp_skb_pcount(skb) of N, then it's safe to fragment off a prefix of M*mss bytes, for any M < N. But with the tricky way TCP pcounts are maintained, this is not always true. For example, suppose the sender sends 4 1-byte packets and have the last 3 packet sacked. It will merge the last 3 packets in the write queue into an skb with pcount = 3 and len = 3 bytes. If another recovery happens after a sack reneging event, tcp_mark_head_lost() may attempt to split the skb assuming it has more than 2*MSS bytes. This sounds very counterintuitive, but as the commit description for the related commit c0638c247f55 ("tcp: don't fragment SACKed skbs in tcp_mark_head_lost()") notes, this is because tcp_shifted_skb() coalesces adjacent regions of SACKed skbs, and when doing this it preserves the sum of their packet counts in order to reflect the real-world dynamics on the wire. The c0638c247f55 commit tried to avoid problems by not fragmenting SACKed skbs, since SACKed skbs are where the non-proportionality between pcount and skb->len/mss is known to be possible. However, that commit did not handle the case where during a reneging event one of these weird SACKed skbs becomes an un-SACKed skb, which tcp_mark_head_lost() can then try to fragment. The fix is to simply mark the entire skb lost when this happens. This makes the recovery slightly more aggressive in such corner cases before we detect reordering. But once we detect reordering this code path is by-passed because FACK is disabled. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29Merge tag 'drm-vc4-fixes-2015-01-19' of http://github.com/anholt/linux into ↵Dave Airlie
drm-fixes This pull request just includes the !CONFIG_PM_SLEEP build fix for vc4. * tag 'drm-vc4-fixes-2015-01-19' of http://github.com/anholt/linux: drm/vc4: Remove broken attempt at GPU reset using genpd.
2016-01-29Merge branch 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux ↵Dave Airlie
into drm-fixes A bunch of etnaviv fixes for 4.5-rc. Most of them are fixing things in code paths that will only be hit if something goes wrong, which have been unearthed by more extensive testing. The only thing that doesn't really qualify as fixes is an UAPI extension that userspace wants to rely on being present, so I want to fast-track this into 4.5 before etnaviv ends up in a released kernel. * 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux: drm/etnaviv: call correct function when trying to vmap a DMABUF drm/etnaviv: rename etnaviv_gem_vaddr to etnaviv_gem_vmap drm/etnaviv: fix get pages error path in etnaviv_gem_vaddr drm/etnaviv: fix memory leak in IOMMU init path drm/etnaviv: add further minor features and varyings count drm/etnaviv: add helper for comparing model/revision IDs drm/etnaviv: add helper to extract bitfields drm/etnaviv: use defined constants for the chip model drm/etnaviv: update common and state_hi xml.h files drm/etnaviv: ignore VG GPUs with FE2.0 drm/etnaviv: fix failure path if model is zero drm/etnaviv: hold object lock while getting pages for coredump drm/etnaviv: remove owner assignment from platform_driver
2016-01-28inet: frag: Always orphan skbs inside ip_defrag()Joe Stringer
Later parts of the stack (including fragmentation) expect that there is never a socket attached to frag in a frag_list, however this invariant was not enforced on all defrag paths. This could lead to the BUG_ON(skb->sk) during ip_do_fragment(), as per the call stack at the end of this commit message. While the call could be added to openvswitch to fix this particular error, the head and tail of the frags list are already orphaned indirectly inside ip_defrag(), so it seems like the remaining fragments should all be orphaned in all circumstances. kernel BUG at net/ipv4/ip_output.c:586! [...] Call Trace: <IRQ> [<ffffffffa0205270>] ? do_output.isra.29+0x1b0/0x1b0 [openvswitch] [<ffffffffa02167a7>] ovs_fragment+0xcc/0x214 [openvswitch] [<ffffffff81667830>] ? dst_discard_out+0x20/0x20 [<ffffffff81667810>] ? dst_ifdown+0x80/0x80 [<ffffffffa0212072>] ? find_bucket.isra.2+0x62/0x70 [openvswitch] [<ffffffff810e0ba5>] ? mod_timer_pending+0x65/0x210 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90 [<ffffffffa03205a2>] ? nf_conntrack_in+0x252/0x500 [nf_conntrack] [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70 [<ffffffffa02051a3>] do_output.isra.29+0xe3/0x1b0 [openvswitch] [<ffffffffa0206411>] do_execute_actions+0xe11/0x11f0 [openvswitch] [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70 [<ffffffffa0206822>] ovs_execute_actions+0x32/0xd0 [openvswitch] [<ffffffffa020b505>] ovs_dp_process_packet+0x85/0x140 [openvswitch] [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70 [<ffffffffa02068a2>] ovs_execute_actions+0xb2/0xd0 [openvswitch] [<ffffffffa020b505>] ovs_dp_process_packet+0x85/0x140 [openvswitch] [<ffffffffa0215019>] ? ovs_ct_get_labels+0x49/0x80 [openvswitch] [<ffffffffa0213a1d>] ovs_vport_receive+0x5d/0xa0 [openvswitch] [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90 [<ffffffffa0214895>] ? internal_dev_xmit+0x5/0x140 [openvswitch] [<ffffffffa02148fc>] internal_dev_xmit+0x6c/0x140 [openvswitch] [<ffffffffa0214895>] ? internal_dev_xmit+0x5/0x140 [openvswitch] [<ffffffff81660299>] dev_hard_start_xmit+0x2b9/0x5e0 [<ffffffff8165fc21>] ? netif_skb_features+0xd1/0x1f0 [<ffffffff81660f20>] __dev_queue_xmit+0x800/0x930 [<ffffffff81660770>] ? __dev_queue_xmit+0x50/0x930 [<ffffffff810b53f1>] ? mark_held_locks+0x71/0x90 [<ffffffff81669876>] ? neigh_resolve_output+0x106/0x220 [<ffffffff81661060>] dev_queue_xmit+0x10/0x20 [<ffffffff816698e8>] neigh_resolve_output+0x178/0x220 [<ffffffff816a8e6f>] ? ip_finish_output2+0x1ff/0x590 [<ffffffff816a8e6f>] ip_finish_output2+0x1ff/0x590 [<ffffffff816a8cee>] ? ip_finish_output2+0x7e/0x590 [<ffffffff816a9a31>] ip_do_fragment+0x831/0x8a0 [<ffffffff816a8c70>] ? ip_copy_metadata+0x1b0/0x1b0 [<ffffffff816a9ae3>] ip_fragment.constprop.49+0x43/0x80 [<ffffffff816a9c9c>] ip_finish_output+0x17c/0x340 [<ffffffff8169a6f4>] ? nf_hook_slow+0xe4/0x190 [<ffffffff816ab4c0>] ip_output+0x70/0x110 [<ffffffff816a9b20>] ? ip_fragment.constprop.49+0x80/0x80 [<ffffffff816aa9f9>] ip_local_out+0x39/0x70 [<ffffffff816abf89>] ip_send_skb+0x19/0x40 [<ffffffff816abfe3>] ip_push_pending_frames+0x33/0x40 [<ffffffff816df21a>] icmp_push_reply+0xea/0x120 [<ffffffff816df93d>] icmp_reply.constprop.23+0x1ed/0x230 [<ffffffff816df9ce>] icmp_echo.part.21+0x4e/0x50 [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70 [<ffffffff810d5f9e>] ? rcu_read_lock_held+0x5e/0x70 [<ffffffff816dfa06>] icmp_echo+0x36/0x70 [<ffffffff816e0d11>] icmp_rcv+0x271/0x450 [<ffffffff816a4ca7>] ip_local_deliver_finish+0x127/0x3a0 [<ffffffff816a4bc1>] ? ip_local_deliver_finish+0x41/0x3a0 [<ffffffff816a5160>] ip_local_deliver+0x60/0xd0 [<ffffffff816a4b80>] ? ip_rcv_finish+0x560/0x560 [<ffffffff816a46fd>] ip_rcv_finish+0xdd/0x560 [<ffffffff816a5453>] ip_rcv+0x283/0x3e0 [<ffffffff810b6302>] ? match_held_lock+0x192/0x200 [<ffffffff816a4620>] ? inet_del_offload+0x40/0x40 [<ffffffff8165d062>] __netif_receive_skb_core+0x392/0xae0 [<ffffffff8165e68e>] ? process_backlog+0x8e/0x230 [<ffffffff810b53f1>] ? mark_held_locks+0x71/0x90 [<ffffffff8165d7c8>] __netif_receive_skb+0x18/0x60 [<ffffffff8165e678>] process_backlog+0x78/0x230 [<ffffffff8165e6dd>] ? process_backlog+0xdd/0x230 [<ffffffff8165e355>] net_rx_action+0x155/0x400 [<ffffffff8106b48c>] __do_softirq+0xcc/0x420 [<ffffffff816a8e87>] ? ip_finish_output2+0x217/0x590 [<ffffffff8178e78c>] do_softirq_own_stack+0x1c/0x30 <EOI> [<ffffffff8106b88e>] do_softirq+0x4e/0x60 [<ffffffff8106b948>] __local_bh_enable_ip+0xa8/0xb0 [<ffffffff816a8eb0>] ip_finish_output2+0x240/0x590 [<ffffffff816a9a31>] ? ip_do_fragment+0x831/0x8a0 [<ffffffff816a9a31>] ip_do_fragment+0x831/0x8a0 [<ffffffff816a8c70>] ? ip_copy_metadata+0x1b0/0x1b0 [<ffffffff816a9ae3>] ip_fragment.constprop.49+0x43/0x80 [<ffffffff816a9c9c>] ip_finish_output+0x17c/0x340 [<ffffffff8169a6f4>] ? nf_hook_slow+0xe4/0x190 [<ffffffff816ab4c0>] ip_output+0x70/0x110 [<ffffffff816a9b20>] ? ip_fragment.constprop.49+0x80/0x80 [<ffffffff816aa9f9>] ip_local_out+0x39/0x70 [<ffffffff816abf89>] ip_send_skb+0x19/0x40 [<ffffffff816abfe3>] ip_push_pending_frames+0x33/0x40 [<ffffffff816d55d3>] raw_sendmsg+0x7d3/0xc30 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90 [<ffffffff816e7557>] ? inet_sendmsg+0xc7/0x1d0 [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70 [<ffffffff816e759a>] inet_sendmsg+0x10a/0x1d0 [<ffffffff816e7495>] ? inet_sendmsg+0x5/0x1d0 [<ffffffff8163e398>] sock_sendmsg+0x38/0x50 [<ffffffff8163ec5f>] ___sys_sendmsg+0x25f/0x270 [<ffffffff811aadad>] ? handle_mm_fault+0x8dd/0x1320 [<ffffffff8178c147>] ? _raw_spin_unlock+0x27/0x40 [<ffffffff810529b2>] ? __do_page_fault+0x1e2/0x460 [<ffffffff81204886>] ? __fget_light+0x66/0x90 [<ffffffff8163f8e2>] __sys_sendmsg+0x42/0x80 [<ffffffff8163f932>] SyS_sendmsg+0x12/0x20 [<ffffffff8178cb17>] entry_SYSCALL_64_fastpath+0x12/0x6f Code: 00 00 44 89 e0 e9 7c fb ff ff 4c 89 ff e8 e7 e7 ff ff 41 8b 9d 80 00 00 00 2b 5d d4 89 d8 c1 f8 03 0f b7 c0 e9 33 ff ff f 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 RIP [<ffffffff816a9a92>] ip_do_fragment+0x892/0x8a0 RSP <ffff88006d603170> Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") Signed-off-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29Merge branch 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Misc radeon and amdgpu fixes: - SMU firmware loading fix for Stoney - DP audio fixes for DCE4.1 - Don't expose fbdev device if no connectors - fix page table LRU list update handling * 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: only move pt bos in LRU list on success drm/radeon: fix DP audio support for APU with DCE4.1 display engine drm/radeon: Add a common function for DFS handling drm/radeon: cleaned up VCO output settings for DP audio drm/amd/powerplay: Update SMU firmware loading for Stoney drm/amdgpu: don't init fbdev if we don't have any connectors drm/radeon: only init fbdev if we have connectors drm/radeon: Ensure radeon bo is unreserved in radeon_gem_va_ioctl drm/amdgpu: fix next_rptr handling for debugfs drm/radeon: properly byte swap vce firmware setup drm/amdgpu: add a message to indicate when powerplay is enabled (v2) drm/amdgpu: fix amdgpu_bo_pin_restricted VRAM placing v2 drm/amd/amdgpu: Improve amdgpu_dpm* macros to avoid unexpected result (v2) drm/amdgpu: Allow the driver to load if amdgpu.powerplay=1 on asics without powerplay support drm/amdgpu: Use drm_calloc_large for VM page_tables array drm/amdgpu: Add some tweaks to gfx 8 soft reset drm/amdgpu: fix tonga smu resume
2016-01-28Merge branch 'sctp-transport-races'David S. Miller
Xin Long says: ==================== fix the transport dead race check by using atomic_add_unless on refcnt sctp: fix the transport dead race check by using atomic_add_unless on refcnt sctp: hold transport before we access t->asoc in sctp proc sctp: remove the dead field of sctp_transport ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28sctp: remove the dead field of sctp_transportXin Long
After we use refcnt to check if transport is alive, the dead can be removed from sctp_transport. The traversal of transport_addr_list in procfs dump is using list_for_each_entry_rcu, no need to check if it has been freed. sctp_generate_t3_rtx_event and sctp_generate_heartbeat_event is protected by sock lock, it's not necessary to check dead, either. also, the timers are cancelled when sctp_transport_free() is called, that it doesn't wait for refcnt to reach 0 to cancel them. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28sctp: hold transport before we access t->asoc in sctp procXin Long
Previously, before rhashtable, /proc assoc listing was done by read-locking the entire hash entry and dumping all assocs at once, so we were sure that the assoc wasn't freed because it wouldn't be possible to remove it from the hash meanwhile. Now we use rhashtable to list transports, and dump entries one by one. That is, now we have to check if the assoc is still a good one, as the transport we got may be being freed. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28sctp: fix the transport dead race check by using atomic_add_unless on refcntXin Long
Now when __sctp_lookup_association is running in BH, it will try to check if t->dead is set, but meanwhile other CPUs may be freeing this transport and this assoc and if it happens that __sctp_lookup_association checked t->dead a bit too early, it may think that the association is still good while it was already freed. So we fix this race by using atomic_add_unless in sctp_transport_hold. After we get one transport from hashtable, we will hold it only when this transport's refcnt is not 0, so that we can make sure t->asoc cannot be freed before we hold the asoc again. Note that sctp association is not freed using RCU so we can't use atomic_add_unless() with it as it may just be too late for that either. Fixes: 4f0087812648 ("sctp: apply rhashtable api to send/recv path") Reported-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28Merge branch 'mlxsw-fixes'David S. Miller
Jiri Pirko says: ==================== mlxsw: driver fixes Couple of various mlxsw driver fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: reg: Use correct offset in field definitonIdo Schimmel
The rx_lane, tx_lane and module fields in the PMLP register don't have an additional offset besides the base one (0x04), so set it to 0x00. Fixes: 4ec14b7634b2 ("mlxsw: Add interface to access registers and process events") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Compare local ports instead of pointersIdo Schimmel
When dumping the FDB we can't compare the actual pointers of the ports structs, as it's possible the struct represents a vPort instead of the underlying physical port. Solve this by comparing the local port number instead, as it's shared between the physical ports and all the vPorts on top of him. Fixes: 54a732018d8e ("mlxsw: spectrum: Adjust switchdev ops for VLAN devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Dump LAG FDB records only onceIdo Schimmel
LAG FDB records can only point to LAG devices or VLAN devices configured on top of them. Therefore, when dumping the FDB we shouldn't associate these records with the underlying physical ports. Fixes: 8a1ab5d76639 ("mlxsw: spectrum: Implement FDB add/remove/dump for LAG") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Use correct netdev when notifying bridgeIdo Schimmel
LAG FDB entries pointing to VLAN devices should be reported to the bridge with the matching VLAN device and not the underlying LAG device. Fixes: aac78a440887 ("mlxsw: spectrum: Adjust FDB notifications for VLAN devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Don't report VLAN for 802.1D FDB entriesIdo Schimmel
When dumping the hardware FDB we should report entries pointing to VLAN devices with VLAN 0, as packets coming into the bridge are untagged. Likewise, pass FDB_{ADD,DEL} notifications with VLAN 0 for these devices. Fixes: 54a732018d8e ("mlxsw: spectrum: Adjust switchdev ops for VLAN devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Notify bridge's FDB only based on learning_syncIdo Schimmel
When we disable learning on bridge port we should still update the software bridge's FDB when entry pointing to this bridge port is aged-out. We can otherwise have an inconsistency between software and hardware tables. Fixes: 8a1ab5d76639 ("mlxsw: spectrum: Implement FDB add/remove/dump for LAG") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Disable learning according to STP stateIdo Schimmel
When port is put into LISTENING state it shouldn't populate the FDB, so set the port's STP state in hardware to DISCARDING instead of LEARNING. It will therefore keep listening to BPDU packets, but discard other non-control packets and won't perform any learning. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Don't forward packets when STP state is DISABLEDIdo Schimmel
When STP state is set to DISABLED the port is assumed to be inactive, but currently we forward packets ingressing through it. Instead, set the port's STP state in hardware to DISCARDING, which means it doesn't forward packets or perform any learning, but it does trap control packets. However, these packets will be dropped by bridge code, which results in the expected behavior. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Flush FDB when leaving bridgeIdo Schimmel
As explained in previous commit, we should always take care of flushing the FDB in the driver and not rely on bridge code. We need to distinguish between two cases with regards to LAG: 1) Port is leaving LAG while LAG is bridged (or VLAN devices on top of it). In this case don't flush the FDB entries pointing to the LAG ID, as this will affect other ports still member in the LAG. Only flush the FDB when the last port in the LAG is leaving the bridge. 2) LAG device is leaving the bridge. In this case the CHANGEUPPER event is simply propagated to each member port, so make each port flush the FDB in its turn. Note that emptying a bridged LAG from ports creates an inconsistency between hardware and software. A user who later (< ageing_time) re-populates the LAG won't have any FDB entries pointing to the LAG ID in hardware, but they will be present in the software bridge's FDB. Currently there is no good solution to this problem, but this will be addressed by us in the future. In order to optimize the flushing process, flush by port or LAG ID if there are no VLAN interfaces on top of the port. Otherwise, flush using (Port / LAG ID, FID=VID} for each of the lower 4K FIDs. In the case of VLAN device simply flush using {Port / LAG ID, vFID} with the vFID to which the VLAN device is mapped to. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: reg: Add the Switch Filtering DB Flush registerIdo Schimmel
When removing a net device from a bridge we should flush the FDB entries associated with this net device. Up until now, we relied upon bridge code to do that for us, but it is possible for user to prevent hardware from syncing with the software bridge (learning_sync=0), so we need to flush overselves. Add the Switch Filtering DB Flush (SFDF) register that is used to flush FDB entries according to different parameters (per-port, per-FID etc). Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Handle port leaving LAG while bridgedIdo Schimmel
It is possible for a user to remove a port from a LAG device, while the LAG device or VLAN devices on top of it are bridged. In these cases, bridge's teardown sequence is never issued, so we need to take care of it ourselves. When LAG's unlinking event is received by port netdev: 1) Traverse its vPorts list and make those member in a bridge leave it. They will be deleted later by LAG code. 2) Make the port netdev itself leave its bridge if member in one. Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28tty: Remove ASYNC_CLOSINGPeter Hurley
The tty core no longer provides nor uses ASYNC_CLOSING; remove from tty_port_close_start() and tty_port_close_end() as well as tty drivers which open-code these state changes. Unfortunately, even though the bit is masked from userspace, its inclusion in a uapi header precludes removing the macro. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: linux-cris-kernel@axis.com Cc: Samuel Ortiz <samuel@sortiz.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28isdn: Remove ASYNC_CLOSINGPeter Hurley
The tty core no longer provides ASYNC_CLOSING. Use private flag for same purpose, which is to disable AT-emulator output (why this is necessary is not clear). Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28tty: mxser: Remove ASYNC_CLOSINGPeter Hurley
The tty core no longer provides ASYNC_CLOSING. Use private flag for same purpose, which is to clear the fifos at each and every interrupt during driver close(). The driver uses this sledgehammer approach because its close/shutdown sequence is hopelessly borked. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28serial: core: Perform RTS signalling before soft flow ctrlPeter Hurley
When throttling, time is of the essence; try RTS signalling before soft flow control, which will take longer. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28serial: core: Unfold < 80 char linesPeter Hurley
Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28serial: core: Remove cast from void ptr in uart_open()Peter Hurley
void * promotes to any pointer type; remove type cast. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28serial: core: Cleanup uart_open() exitPeter Hurley
If aborting uart_open() unsuccessfully, retval is non-zero, so the existing fall-through exit is equivalent. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28serial: Fix ASYNC_* => UPF_* flags misusePeter Hurley
The UPF_* flags are the correct values to use for struct uart_port and struct old_serial_port/SERIAL_PORT_DFNS. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28serial: core: Use tty->index for port # in debug messagesPeter Hurley
The uart port may have already been removed by uart_remove_one_port(); use equivalent tty->index (which is always valid in these contexts) instead. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28serial: core: Fold do_uart_get_info() into callerPeter Hurley
do_uart_get_info() has a single caller: uart_get_info(). Manually inline do_uart_get_info(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28serial: core: Fold __uart_put_char() into callerPeter Hurley
uart_put_char() is the required interface; manually inline __uart_put_char(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28tty: Use termios c_*flag macrosPeter Hurley
Expressions of the form "tty->termios.c_*flag & FLAG" are more clearly expressed with the termios flags macros, I_FLAG(), C_FLAG(), O_FLAG(), and L_FLAG(). Convert treewide. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28tty: Allow unreadable mess to be > 80 charsPeter Hurley
Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28tty: Unify receive_buf() code pathsPeter Hurley
Instead of two distinct code branches for receive_buf() handling, use tty_ldisc_receive_buf() as the single code path. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28tty: Fix GPF in flush_to_ldisc(), part 2Peter Hurley
commit 9ce119f318ba ("tty: Fix GPF in flush_to_ldisc()") fixed a GPF caused by a line discipline which does not define a receive_buf() method. However, the vt driver (and speakup driver also) pushes selection data directly to the line discipline receive_buf() method via tty_ldisc_receive_buf(). Fix the same problem in tty_ldisc_receive_buf(). Cc: <stable@vger.kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28staging: dgap: Remove redundant write_wait wakeupsPeter Hurley
Waking the write_wait queue is exactly what tty_wakeup() does; remove the open-coded wakeups. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28ia64: Pin controlling tty for unaligned fault messagePeter Hurley
Prevent destruction of the controlling tty before tty_write_message() can determine if the tty is safe to use. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28n_tty: Ignore all read data when closingPeter Hurley
On final port close (and thus final tty close), only output flow control requests in the input data should be processed. Ignore all other input data, including parity errors, overruns and breaks. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28tty: rocket: Remove private close_waitPeter Hurley
This driver's private completion variable, close_wait, is no longer used for wait since "tty: Remove ASYNC_CLOSING checks in open()/hangup"; remove. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28serial: 8250: Unfold < 80 char linesPeter Hurley
Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28serial: 8250: Wait for irq to complete before shutdownPeter Hurley
After masking all interrupts, wait for the irq handler to complete before continuing shutdown. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28serial: 8250: Unlink uart console ptr if console setup failsPeter Hurley
If console setup fails (eg., there is no valid port at that index), unlink the console ptr; otherwise, when the driver unloads, the console will be unregistered (even though setup, and thus registration, failed) and a console disabled message will be printed. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-23 08:13:38 +0000