summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-27tty: Avoid unnecessary temporaries for tty->ldiscPeter Hurley
tty_ldisc_setup() is race-free and can reference tty->ldisc without snapshots. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Document c_line == N_TTY initial conditionPeter Hurley
The line discipline id is stored in the tty's termios; document the implicit initial value of N_TTY. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Destroy ldisc instance on hangupPeter Hurley
Currently, when the tty is hungup, the ldisc is re-instanced; ie., the current instance is destroyed and a new instance is created. The purpose of this design was to guarantee a valid, open ldisc for the lifetime of the tty. However, now that tty buffers are owned by and have lifetime equivalent to the tty_port (since v3.10), any data received immediately after the ldisc is re-instanced may cause continued driver i/o operations concurrently with the driver's hangup() operation. For drivers that shutdown h/w on hangup, this is unexpected and usually bad. For example, the serial core may free the xmit buffer page concurrently with an in-progress write() operation (triggered by echo). With the existing stable and robust ldisc reference handling, the cleaned-up tty_reopen(), the straggling unsafe ldisc use cleaned up, and the preparation to properly handle a NULL tty->ldisc, the ldisc instance can be destroyed and only re-instanced when the tty is re-opened. If the tty was opened as /dev/console or /dev/tty0, the original behavior of re-instancing the ldisc is retained (the 'reinit' parameter to tty_ldisc_hangup() is true). This is required since those file descriptors are never hungup. This patch has neglible impact on userspace; the tty file_operations ptr is changed to point to the hungup file operations _before_ the ldisc instance is destroyed, so only racing file operations might now retrieve a NULL ldisc reference (which is simply handled as if the hungup file operation had been called instead -- see "tty: Prepare for destroying line discipline on hangup"). This resolves a long-standing FIXME and several crash reports. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Refactor tty_ldisc_reinit() for reusePeter Hurley
At tty hangup, the line discipline instance is reinitialized by closing the current ldisc instance and opening a new instance. This operation is complicated by error recovery: if the attempt to reinit the current line discipline fails, the line discipline is reset to N_TTY (which should not but can fail). Re-purpose tty_ldisc_reinit() to return a valid, open line discipline instance, or otherwise, an error. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Use 'disc' for line discipline index namePeter Hurley
tty->ldisc is a ptr to struct tty_ldisc, but unfortunately 'ldisc' is also used as a parameter or local name to refer to the line discipline index value (ie, N_TTY, N_GSM, etc.); instead prefer the name used by the line discipline registration/ref counting functions. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Move tty_ldisc_kill()Peter Hurley
In preparation for destroying the line discipline instance on hangup, move tty_ldisc_kill() to eliminate needless forward declarations. No functional change. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Handle NULL tty->ldiscPeter Hurley
In preparation of destroying line discipline on hangup, fix ldisc core operations to properly handle when the tty's ldisc is NULL. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Prepare for destroying line discipline on hangupPeter Hurley
tty file_operations (read/write/ioctl) wait for the ldisc reference indefinitely (until ldisc lifetime events, such as hangup or TIOCSETD, finish). Since hangup now destroys the ldisc and does not instance another copy, file_operations must now be prepared to receive a NULL ldisc reference from tty_ldisc_ref_wait(): CPU 0 CPU 1 ----- ----- (*f_op->read)() => tty_read() __tty_hangup() ... f_op = &hung_up_tty_fops; ... tty_ldisc_hangup() tty_ldisc_lock() tty_ldisc_kill() tty->ldisc = NULL tty_ldisc_unlock() ld = tty_ldisc_ref_wait() /* ld == NULL */ Instead, the action taken now is to return the same value as if the tty had been hungup a moment earlier: CPU 0 CPU 1 ----- ----- __tty_hangup() ... f_op = &hung_up_tty_fops; (*f_op->read)() => hung_up_tty_read() return 0; ... tty_ldisc_hangup() tty_ldisc_lock() tty_ldisc_kill() tty->ldisc = NULL tty_ldisc_unlock() Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Fix comments for tty_ldisc_release()Peter Hurley
tty_ldisc_kill() sets tty->ldisc to NULL; _not_ to N_TTY with a valid but unopened ldisc. Fix function header documentation. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Fix comments for tty_ldisc_get()Peter Hurley
tty_ldisc_get() returns ERR_PTR() values if unsuccessful, not NULL; fix function header documentation. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Reset c_line from driver's init_termiosPeter Hurley
After the ldisc is released, but before the tty is destroyed, the termios is saved (in tty_free_termios()); this termios is restored if a new tty is created on next open(). However, the line discipline is always reset, which is not obvious in the current method. Instead, reset as part of the restore. Restore the original line discipline, which may not have been N_TTY. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Remove chars_in_buffer() line discipline methodPeter Hurley
The chars_in_buffer() line discipline method serves no functional purpose, other than as a (dubious) debugging aid for mostly bit-rotting drivers. Despite being documented as an optional method, every caller is unconditionally executed (although conditionally compiled). Furthermore, direct tty->ldisc access without an ldisc ref is unsafe. Lastly, N_TTY's chars_in_buffer() has warned of removal since 3.12. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27NFC: nci: Remove dead codePeter Hurley
The N_NCI ldisc does not define a flush_buffer() ldisc method, so the check when opening the ldisc is always false. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27serial: 68328: Remove bogus ldisc resetPeter Hurley
As the #warning indicates, the open-coded ldisc reset was always not ok. Not only is this code long dead, but now it would have no effect as the ldisc is destroyed when this driver's close() method returns; remove. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27staging: digi: Replace open-coded tty_wakeup()Peter Hurley
The open-coded tty_wakeup()s are attempts to workaround fixed bugs in the line discipline write_wakeup() method. Replace with tty_wakeup(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27PCI: iproc: Allow multiple devices except on PAXCRay Jui
Commit 943ebae781f5 ("PCI: iproc: Add PAXC interface support") only allowed device 0, which is a regression on BCMA-based platforms. All systems support only one device, a Root Port at 00:00.0, on the root bus. PAXC-based systems support only the Root Port (00:00.0) and a single device (with multiple functions) below it, e.g., 01:00.0, 01:00.1, etc. Non-PAXC systems support arbitrary devices below the Root Port. [bhelgaas: changelog, fold in removal of MAX_NUM_PAXC_PF check] Fixes: 943ebae781f5 ("PCI: iproc: Add PAXC interface support") Reported-by: Rafal Milecki <zajec5@gmail.com> Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-27tty: Refactor tty_open()Peter Hurley
Extract the driver lookup and reopen-or-initialize logic into helper function tty_open_by_driver(). No functional change. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Consolidate noctty checks in tty_open()Peter Hurley
Evaluate the conditions which prevent this tty being the controlling terminal in one place, just before setting the controlling terminal. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Remove __lockfunc annotation from tty lock functionsPeter Hurley
The tty lock/unlock code does not belong in the special lockfunc section which is treated specially by stack backtraces. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27pty: Remove pty_unix98_shutdown()Peter Hurley
The tty core invokes the optional driver shutdown() just before the optional driver remove() (shutdown() has access to the termios and remove() does not). Because pty drivers must prevent the default remove() action, the Unix98 pty drivers define a dummy remove() function. Instead, release the slave index in the remove() method and delete the optional shutdown() method. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Re-declare tty_driver_remove_tty() file scopePeter Hurley
tty_driver_remove_tty() is only local-scope; declare as static. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Fix tty_init_termios() declarationPeter Hurley
tty_init_termios() never returns an error; re-declare as void. Remove unnecessary error handling from callers. Remove extern declarations of tty_free_termios() and free_tty_struct() and re-declare in file scope. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Remove !tty check from free_tty_struct()Peter Hurley
free_tty_struct() is never called with NULL tty; the two call sites would already have faulted on earlier access. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Fix ldisc leak in failed tty_init_dev()Peter Hurley
release_tty() leaks the ldisc instance when called directly (rather than when releasing the file descriptor from tty_release()). Since tty_ldisc_release() clears tty->ldisc, releasing the ldisc instance at tty teardown if tty->ldisc is non-null is not in danger of double-releasing the ldisc. Remove deinitialize_tty_struct() now that free_tty_struct() always performs the tty_ldisc_deinit(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27cpufreq: cpufreq-dt: avoid uninitialized variable warnings:Arnd Bergmann
gcc warns quite a bit about values returned from allocate_resources() in cpufreq-dt.c: cpufreq-dt.c: In function 'cpufreq_init': cpufreq-dt.c:327:6: error: 'cpu_dev' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:197:17: note: 'cpu_dev' was declared here cpufreq-dt.c:376:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:199:14: note: 'cpu_clk' was declared here cpufreq-dt.c: In function 'dt_cpufreq_probe': cpufreq-dt.c:461:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:447:14: note: 'cpu_clk' was declared here The problem is that it's slightly hard for gcc to follow return codes across PTR_ERR() calls. This patch uses explicit assignments to the "ret" variable to make it easier for gcc to verify that the code is actually correct, without the need to add a bogus initialization. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototypeArnd Bergmann
There are two definitions of pxa_cpufreq_change_voltage, with slightly different prototypes after one of them had its argument marked 'const'. Now the other one (for !CONFIG_REGULATOR) produces a harmless warning: drivers/cpufreq/pxa2xx-cpufreq.c: In function 'pxa_set_target': drivers/cpufreq/pxa2xx-cpufreq.c:291:36: warning: passing argument 1 of 'pxa_cpufreq_change_voltage' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); ^ drivers/cpufreq/pxa2xx-cpufreq.c:205:12: note: expected 'struct pxa_freqs *' but argument is of type 'const struct pxa_freqs *' static int pxa_cpufreq_change_voltage(struct pxa_freqs *pxa_freq) ^ This changes the prototype in the same way as the other, which avoids the warning. Fixes: 03c229906311 (cpufreq: pxa: make pxa_freqs arrays const) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.2+ <stable@vger.kernel.org> # 4.2+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27PM: APM_EMULATION does not depend on PMArnd Bergmann
The APM emulation code does multiple things, and some of them depend on PM_SLEEP, while the battery management does not. However, selecting the symbol like SHARPSL_PM does causes a Kconfig warning: warning: (SHARPSL_PM && PMAC_APM_EMU) selects APM_EMULATION which has unmet direct dependencies (PM && SYS_SUPPORTS_APM_EMULATION) From all I can tell, this is completely harmless, and we can simply allow APM_EMULATION to be enabled here, even if PM is not. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27cpufreq: Use list_is_last() to check last entry of the policy listGautham R Shenoy
Currently next_policy() explicitly checks if a policy is the last policy in the cpufreq_policy_list. Use the standard list_is_last primitive instead. Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27cpufreq: Fix NULL reference crash while accessing policy->governor_dataViresh Kumar
There is a race discovered by Juri, where we are able to: - create and read a sysfs file before policy->governor_data is being set to a non NULL value. OR - set policy->governor_data to NULL, and reading a file before being destroyed. And so such a crash is reported: Unable to handle kernel NULL pointer dereference at virtual address 0000000c pgd = edfc8000 [0000000c] *pgd=bfc8c835 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: CPU: 4 PID: 1730 Comm: cat Not tainted 4.5.0-rc1+ #463 Hardware name: ARM-Versatile Express task: ee8e8480 ti: ee930000 task.ti: ee930000 PC is at show_ignore_nice_load_gov_pol+0x24/0x34 LR is at show+0x4c/0x60 pc : [<c058f1bc>] lr : [<c058ae88>] psr: a0070013 sp : ee931dd0 ip : ee931de0 fp : ee931ddc r10: ee4bc290 r9 : 00001000 r8 : ef2cb000 r7 : ee4bc200 r6 : ef2cb000 r5 : c0af57b0 r4 : ee4bc2e0 r3 : 00000000 r2 : 00000000 r1 : c0928df4 r0 : ef2cb000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: adfc806a DAC: 00000051 Process cat (pid: 1730, stack limit = 0xee930210) Stack: (0xee931dd0 to 0xee932000) 1dc0: ee931dfc ee931de0 c058ae88 c058f1a4 1de0: edce3bc0 c07bfca4 edce3ac0 00001000 ee931e24 ee931e00 c01fcb90 c058ae48 1e00: 00000001 edce3bc0 00000000 00000001 ee931e50 ee8ff480 ee931e34 ee931e28 1e20: c01fb33c c01fcb0c ee931e8c ee931e38 c01a5210 c01fb314 ee931e9c ee931e48 1e40: 00000000 edce3bf0 befe4a00 ee931f78 00000000 00000000 000001e4 00000000 1e60: c00545a8 edce3ac0 00001000 00001000 befe4a00 ee931f78 00000000 00001000 1e80: ee931ed4 ee931e90 c01fbed8 c01a5038 ed085a58 00020000 00000000 00000000 1ea0: c0ad72e4 ee931f78 ee8ff488 ee8ff480 c077f3fc 00001000 befe4a00 ee931f78 1ec0: 00000000 00001000 ee931f44 ee931ed8 c017c328 c01fbdc4 00001000 00000000 1ee0: ee8ff480 00001000 ee931f44 ee931ef8 c017c65c c03deb10 ee931fac ee931f08 1f00: c0009270 c001f290 c0a8d968 ef2cb000 ef2cb000 ee8ff480 00000020 ee8ff480 1f20: ee8ff480 befe4a00 00001000 ee931f78 00000000 00000000 ee931f74 ee931f48 1f40: c017d1ec c017c2f8 c019c724 c019c684 ee8ff480 ee8ff480 00001000 befe4a00 1f60: 00000000 00000000 ee931fa4 ee931f78 c017d2a8 c017d160 00000000 00000000 1f80: 000a9f20 00001000 befe4a00 00000003 c000ffe4 ee930000 00000000 ee931fa8 1fa0: c000fe40 c017d264 000a9f20 00001000 00000003 befe4a00 00001000 00000000 Unable to handle kernel NULL pointer dereference at virtual address 0000000c 1fc0: 000a9f20 00001000 befe4a00 00000003 00000000 00000000 00000003 00000001 pgd = edfc4000 [0000000c] *pgd=bfcac835 1fe0: 00000000 befe49dc 000197f8 b6e35dfc 60070010 00000003 3065b49d 134ac2c9 [<c058f1bc>] (show_ignore_nice_load_gov_pol) from [<c058ae88>] (show+0x4c/0x60) [<c058ae88>] (show) from [<c01fcb90>] (sysfs_kf_seq_show+0x90/0xfc) [<c01fcb90>] (sysfs_kf_seq_show) from [<c01fb33c>] (kernfs_seq_show+0x34/0x38) [<c01fb33c>] (kernfs_seq_show) from [<c01a5210>] (seq_read+0x1e4/0x4e4) [<c01a5210>] (seq_read) from [<c01fbed8>] (kernfs_fop_read+0x120/0x1a0) [<c01fbed8>] (kernfs_fop_read) from [<c017c328>] (__vfs_read+0x3c/0xe0) [<c017c328>] (__vfs_read) from [<c017d1ec>] (vfs_read+0x98/0x104) [<c017d1ec>] (vfs_read) from [<c017d2a8>] (SyS_read+0x50/0x90) [<c017d2a8>] (SyS_read) from [<c000fe40>] (ret_fast_syscall+0x0/0x1c) Code: e5903044 e1a00001 e3081df4 e34c1092 (e593300c) ---[ end trace 5994b9a5111f35ee ]--- Fix that by making sure, policy->governor_data is updated at the right places only. Cc: 4.2+ <stable@vger.kernel.org> # 4.2+ Reported-and-tested-by: Juri Lelli <juri.lelli@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27cpuidle: coupled: remove unused define cpuidle_coupled_lockAnders Roxell
This was found with the -RT patch enabled, but the fix should apply to non-RT also. Used multi_v7_defconfig+PREEMPT_RT_FULL=y and this caused a compilation warning without this fix: ../drivers/cpuidle/coupled.c:122:21: warning: 'cpuidle_coupled_lock' defined but not used [-Wunused-variable] Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27PM / Domains: Fix typo in commentMoritz Fischer
Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27PM / Domains: Fix potential deadlock while adding/removing subdomainsUlf Hansson
We must preserve the same order of how we acquire and release the lock for genpd, as otherwise we may encounter deadlocks. The power on phase of a genpd starts by acquiring its lock. Then it walks the hierarchy of its parent domains to be able to power on these first, as per design of genpd. From a locking perspective this means the locks of the parents becomes acquired after the lock of the subdomain. Let's fix pm_genpd_add|remove_subdomain() to maintain the same order of acquiring/releasing the genpd lock as being applied in the power on/off sequence. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27ASoC: simple-card: don't fail if sysclk setting is not supportedAaro Koskinen
Commit e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk with mclk-fs") added sysclk / SND_SOC_CLOCK_OUT setting, that makes asoc_simple_card_hw_params fail if the operation is not supported, although the intention clearly was to ignore ENOTSUPP. Fix it. The patch fixes audio playback on Kirkwood / OpenRD client, where the following errors are seen: asoc-simple-card sound: ASoC: machine hw_params failed: -524 alsa-lib: /alsa-lib-1.0.28/src/pcm/pcm_hw.c:327:(snd_pcm_hw_hw_params) SNDRV_PCM_IOCTL_HW_PARAMS failed (-524): Unknown error 524 Fixes: e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk with mclk-fs") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio tests and fixes from Michael Tsirkin: "This fixes existing tests broken by barrier rework, and adds some new tests. Plus, there's a fix for an old bug in virtio-pci" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: tools/virtio: add ringtest utilities sh: fix smp_store_mb for !SMP tools/virtio: use virt_xxx barriers virtio_pci: fix use after free on release
2016-01-27Revert "MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() ↵Ralf Baechle
function" This reverts commit 5bdb102b3f9785cb88467bc7c75fa0f5cacc8dc5. Brian Norris <computersforpeace@gmail.com> is reporting: Ralf, Please revert this and send it to Linus (or else, I can send it myself). This is causing build failures, because I didn't take the rest of Simon's series yet. drivers/mtd/bcm63xxpart.c: In function 'bcm63xx_parse_cfe_partitions': drivers/mtd/bcm63xxpart.c:93:2: error: implicit declaration of function 'bcm63xx_nvram_get_psi_size' [-Werror=implicit-function-declaration] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> References: https://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20160126191607.GA111152%40google.com
2016-01-27Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "The main thing here is to get us booting under qemu again after it turned out that not all of the PMU registers are emulated there, causing us to die early in boot. - Ensure we don't access PMU registers of the PMU is not implemented (fixes booting under QEMU) - Fix BUG_ON triggered during module loading with DEBUG_SET_MODULE_RONX - Ensure the kasan zero page is read-only - Hide __efistub_ symbol aliases from kallsyms, since they otherwise confuse the backtrace code - Ensure !PTE_WRITE kernel ptes are marked as read-only - defconfig updates based on requests and patches on the list - Other minor fixes (typos, build system)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: avoid calling apply_to_page_range on empty range arm64: defconfig: updates for 4.5 arm64: errata: Add -mpc-relative-literal-loads to build flags Eliminate the .eh_frame sections from the aarch64 vmlinux and kernel modules arm64: Fix an enum typo in mm/dump.c arm64: Honour !PTE_WRITE in set_pte_at() for kernel mappings arm64: kernel: fix architected PMU registers unconditional access arm64: kasan: ensure that the KASAN zero page is mapped read-only arm64: hide __efistub_ aliases from kallsyms
2016-01-27component: Detach components when deleting master structJon Medhurst (Tixy)
component_master_add_with_match calls find_components which, if any components already exist, it attaches to the master struct. However, if we later encounter an error the master struct is deleted, leaving components with a dangling pointer to it. If the error was a temporary one, e.g. for probe deferral, then when the master device is re-probed, it will fail to find the required components as they appear to already be attached to a master. Fix this by nulling components pointers to the master struct when it is deleted. This code is factored out into a separate function so it can be shared with component_master_del. Signed-off-by: Jon Medhurst <tixy@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-01-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "s390 and POWER bug fixes, plus enabling the KVM-VFIO interface on s390" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM doc: Fix KVM_SMI chapter number KVM: s390: fix memory overwrites when vx is disabled KVM: s390: Enable the KVM-VFIO device KVM: s390: fix guest fprs memory leak KVM: PPC: Fix ONE_REG AltiVec support KVM: PPC: Increase memslots to 512 KVM: PPC: Book3S PR: Remove unused variable 'vcpu_book3s' KVM: PPC: Fix emulation of H_SET_DABR/X on POWER8 KVM: PPC: Book3S HV: Handle unexpected traps in guest entry/exit code better
2016-01-27mailmap: redirect inactive address <ao2@amarulasolutions.com>Antonio Ospite
The email address <ao2@amarulasolutions.com> is not active anymore, use Antonio's personal email address <ao2@ao2.it> in case someone wants to get in touch for the code wrote for Amarula Solutions. Signed-off-by: Antonio Ospite <ao2@ao2.it> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-27vfio/noiommu: Don't use iommu_present() to track fake groupsAlex Williamson
Using iommu_present() to determine whether an IOMMU group is real or fake has some problems. First, apparently Power systems don't register an IOMMU on the device bus, so the groups and containers get marked as noiommu and then won't bind to their actual IOMMU driver. Second, I expect we'll run into the same issue as we try to support vGPUs through vfio, since they're likely to emulate this behavior of creating an IOMMU group on a virtual device and then providing a vfio IOMMU backend tailored to the sort of isolation they provide, which won't necessarily be fully compatible with the IOMMU API. The solution here is to use the existing iommudata interface to IOMMU groups, which allows us to easily identify the fake groups we've created for noiommu purposes. The iommudata we set is purely arbitrary since we're only comparing the address, so we use the address of the noiommu switch itself. Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by: Anatoly Burakov <anatoly.burakov@intel.com> Tested-by: Santosh Shukla <sshukla@mvista.com> Fixes: 03a76b60f8ba ("vfio: Include No-IOMMU mode") Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-01-27ARM: wire up copy_file_range() syscallRussell King
Add the copy_file_range() syscall to ARM. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-01-27drm/radeon: fix DP audio support for APU with DCE4.1 display engineSlava Grigorev
Properly setup the DFS divider for DP audio for DCE4.1. Signed-off-by: Slava Grigorev <slava.grigorev@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-01-27drm/radeon: Add a common function for DFS handlingSlava Grigorev
Move encoding of DFS (digital frequency synthesizer) divider into a separate function and improve calculation precision. Signed-off-by: Slava Grigorev <slava.grigorev@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-01-27drm/radeon: cleaned up VCO output settings for DP audioSlava Grigorev
This is preparation for the fixes in the following patches. Signed-off-by: Slava Grigorev <slava.grigorev@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-01-27ARM: dts: am57xx: sbc-am57x: correct Eth PHY settingsDmitry Lifshitz
Update Eth PHY settings to make it possible to run both phys at 1Gbps. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmuxDmitry Lifshitz
Fix CPSW EMAC pinmux Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: am57xx: sbc-am57x: fix UART3 pinmuxDmitry Lifshitz
Fix UART3 pinmux. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequencyDmitry Lifshitz
On-board SPI flash cat act at 48Mhz SPI bus frequency. Update the DT frequency property. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2Dmitry Lifshitz
Setup USB2 to act in "HOST" mode by default. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C addressDmitry Lifshitz
Fix SB-SOM EEPROM I2C address Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit (git 2.34.1) at 2025-09-23 11:21:02 +0000