summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-10-14net: wan: slic_ds26522: Export OF module alias informationJavier Martinez Canillas
When the device is registered via OF, the OF table is used to match the driver instead of the SPI device ID table, but the entries in the later are used as aliasses to load the module if the driver was not built-in. This is because the SPI core always reports an SPI module alias instead of an OF one, but that could change so it's better to always export it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14net: wan: slic_ds26522: add SPI device ID table to fix module autoloadJavier Martinez Canillas
If the driver is built as a module, module alias information isn't filled so the module won't be autoloaded. Add a SPI device ID table and use the MODULE_DEVICE_TABLE() macro so the information is exported in the module. Before this patch: $ modinfo drivers/net/wan/slic_ds26522.ko | grep alias $ After this patch: $ modinfo drivers/net/wan/slic_ds26522.ko | grep alias alias: spi:ds26522 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14ipv6: correctly add local routes when lo goes upNicolas Dichtel
The goal of the patch is to fix this scenario: ip link add dummy1 type dummy ip link set dummy1 up ip link set lo down ; ip link set lo up After that sequence, the local route to the link layer address of dummy1 is not there anymore. When the loopback is set down, all local routes are deleted by addrconf_ifdown()/rt6_ifdown(). At this time, the rt6_info entry still exists, because the corresponding idev has a reference on it. After the rcu grace period, dst_rcu_free() is called, and thus ___dst_free(), which will set obsolete to DST_OBSOLETE_DEAD. In this case, init_loopback() is called before dst_rcu_free(), thus obsolete is still sets to something <= 0. So, the function doesn't add the route again. To avoid that race, let's check the rt6 refcnt instead. Fixes: 25fb6ca4ed9c ("net IPv6 : Fix broken IPv6 routing table after loopback down-up") Fixes: a881ae1f625c ("ipv6: don't call addrconf_dst_alloc again when enable lo") Fixes: 33d99113b110 ("ipv6: reallocate addrconf router for ipv6 address when lo device up") Reported-by: Francesco Santoro <francesco.santoro@6wind.com> Reported-by: Samuel Gauthier <samuel.gauthier@6wind.com> CC: Balakumaran Kannan <Balakumaran.Kannan@ap.sony.com> CC: Maruthi Thotad <Maruthi.Thotad@ap.sony.com> CC: Sabrina Dubroca <sd@queasysnail.net> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Weilong Chen <chenweilong@huawei.com> CC: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14ip6_tunnel: fix ip6_tnl_lookupVadim Fedorenko
The commit ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel endpoints.") introduces support for wildcards in tunnels endpoints, but in some rare circumstances ip6_tnl_lookup selects wrong tunnel interface relying only on source or destination address of the packet and not checking presence of wildcard in tunnels endpoints. Later in ip6_tnl_rcv this packets can be dicarded because of difference in ipproto even if fallback device have proper ipproto configuration. This patch adds checks of wildcard endpoint in tunnel avoiding such behavior Fixes: ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel endpoints.") Signed-off-by: Vadim Fedorenko <junk@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14irqchip/gicv3: Handle loop timeout properDan Carpenter
The timeout loop terminates when the loop count is zero, but the decrement of the count variable is post check. So count is -1 when we check for the timeout and therefor the error message is supressed. Change it to predecrement, so the error message is emitted. [ tglx: Massaged changelog ] Fixes: a2c225101234 ("irqchip: gic-v3: Refactor gic_enable_redist to support both enabling and disabling") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kernel-janitors@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20161014072534.GA15168@mwanda Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-14irqchip/jcore: Fix lost per-cpu interruptsRich Felker
The J-Core AIC does not have separate interrupt numbers reserved for cpu-local vs global interrupts. Instead, the driver requesting the irq is expected to know whether its device uses per-cpu interrupts or not. Previously it was assumed that handle_simple_irq could work for both cases, but it intentionally drops interrupts for an irq number that already has a handler running. This resulted in the timer interrupt for one cpu being lost when multiple cpus' timers were set for approximately the same expiration time, leading to stalls. In theory the same could also happen with IPIs. To solve the problem, instead of registering handle_simple_irq as the handler, register a wrapper function which checks whether the irq to be handled was requested as per-cpu or not, and passes it to handle_simple_irq or handle_percpu_irq accordingly. Fixes: 981b58f66cfc ("irqchip/jcore-aic: Add J-Core AIC driver") Signed-off-by: Rich Felker <dalias@libc.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-sh@vger.kernel.org Link: http://lkml.kernel.org/r/f18cec30bc17e3f52e478dd9f6714bfab02f227f.1476390724.git.dalias@libc.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-14irqchip/eznps: Acknowledge NPS_IPI before calling the handlerNoam Camus
IPI_IRQ (also TIMER0_IRQ) should be acked before the action->handler is called in handle_percpu_devid_irq. The IPI irq is edge sensitive and we might miss an IPI interrupt if it is triggered again while the handler runs. Fixes: 44df427c894a ("irqchip: add nps Internal and external irqchips") Signed-off-by: Noam Camus <noamca@mellanox.com> Cc: marc.zyngier@arm.com Cc: jason@lakedaemon.net Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1476364532-12634-1-git-send-email-noamca@mellanox.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-14x86: Remove duplicate rtit status MSR macroLongpeng(Mike)
The MSR_IA32_RTIT_STATUS is defined twice, so remove one. Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: len.brown@intel.com Cc: peterz@infradead.org Cc: rafael.j.wysocki@intel.com Cc: alexander.shishkin@linux.intel.com Cc: ray.huang@amd.com Cc: Aravind.Gopalakrishnan@amd.com Cc: wu.wubin@huawei.com Cc: srinivas.pandruvada@linux.intel.com Cc: zhaoshenglong@huawei.com Cc: vladimir_zapolskiy@mentor.com Link: http://lkml.kernel.org/r/1476405740-80816-1-git-send-email-longpeng2@huawei.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-14x86/smp: Add irq_enter/exit() in smp_reschedule_interrupt()Wanpeng Li
=============================== [ INFO: suspicious RCU usage. ] 4.8.0+ #24 Not tainted ------------------------------- ./arch/x86/include/asm/msr-trace.h:47 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! no locks held by swapper/1/0. [<ffffffff9d492b95>] do_trace_write_msr+0x135/0x140 [<ffffffff9d06f860>] native_write_msr+0x20/0x30 [<ffffffff9d065fad>] native_apic_msr_eoi_write+0x1d/0x30 [<ffffffff9d05bd1d>] smp_reschedule_interrupt+0x1d/0x30 [<ffffffff9d8daec6>] reschedule_interrupt+0x96/0xa0 Reschedule interrupt may be called in cpu idle state. This causes lockdep check warning above. Add irq_enter/exit() in smp_reschedule_interrupt(), irq_enter() tells the RCU subsystems to end the extended quiescent state, so the following trace call in ack_APIC_irq() works correctly. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Link: http://lkml.kernel.org/r/1476409733-5133-1-git-send-email-wanpeng.li@hotmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-14Merge branches 'acpi-fan', 'acpi-ec', 'acpi-drivers' and 'acpi-osl'Rafael J. Wysocki
* acpi-fan: ACPI / fan: Fix error reading cur_state * acpi-ec: ACPI / EC: Fix unused function warning when CONFIG_PM_SLEEP=n * acpi-drivers: ACPI / PAD: don't register acpi_pad driver if running as Xen dom0 * acpi-osl: acpi_os_vprintf: Use printk_get_level() to avoid unnecessary KERN_CONT
2016-10-14Merge branches 'device-properties' and 'acpi-misc'Rafael J. Wysocki
* device-properties: ACPI / property: Allow holes in reference properties * acpi-misc: MAINTAINERS: Add ARM64-specific ACPI maintainers entry
2016-10-14Merge branches 'pm-cpufreq' and 'pm-devfreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: CPPC: Correct desired_perf calculation cpufreq: conservative: Fix next frequency selection cpufreq: skip invalid entries when searching the frequency cpufreq: intel_pstate: Fix struct pstate_adjust_policy kerneldoc cpufreq: intel_pstate: Proportional algorithm for Atom cpufreq: intel_pstate: Clarify comment in get_target_pstate_use_performance() cpufreq: intel_pstate: Fix unsafe HWP MSR access * pm-devfreq: PM / devfreq: Skip status update on uninitialized previous_freq PM / devfreq: Add proper locking around list_del() PM / devfreq: exynos-nocp: Remove redundant code PM / devfreq: exynos-nocp: Select REGMAP_MMIO
2016-10-14drm/i915/gtt: Free unused lower-level page tablesMichał Winiarski
Since "Dynamic page table allocations" were introduced, our page tables can grow (being dynamically allocated) with address space range usage. Unfortunately, their lifetime is bound to vm. This is not a huge problem when we're not using softpin - drm_mm is creating an upper bound on used range by causing addresses for our VMAs to eventually be reused. With softpin, long lived contexts can drain the system out of memory even with a single "small" object. For example: bo = bo_alloc(size); while(true) offset += size; exec(bo, offset); Will cause us to create new allocations until all memory in the system is used for tracking GPU pages (even though almost all PTEs in this vm are pointing to scratch). Let's free unused page tables in clear_range to prevent this - if no entries are used, we can safely free it and return this information to the caller (so that higher-level entry is pointing to scratch). v2: Document return value and free semantics (Joonas) v3: No newlines in vars block (Joonas) v4: Drop redundant local 'reduce' variable v5: Handle CI fail with enable_ppgtt=2 Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1476360162-24062-3-git-send-email-michal.winiarski@intel.com
2016-10-14drm/i915/gtt: Split gen8_ppgtt_clear_pte_rangeMichał Winiarski
Let's use more top-down approach, where each gen8_ppgtt_clear_* function is responsible for clearing the struct passed as an argument and calling relevant clear_range functions on lower-level tables. Doing this rather than operating on PTE ranges makes the implementation of shrinking page tables quite simple. v2: Drop min when calculating num_entries, no negation in 48b ppgtt check, no newlines in vars block (Joonas) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1476360162-24062-2-git-send-email-michal.winiarski@intel.com
2016-10-14drm/i915: Remove unused "valid" parameter from pte_encodeMichał Winiarski
We never used any invalid ptes, those were put in place for a possibility of doing gpu faults. However our batchbuffers are not restricted in length, so everything needs to be pointing to something and thus out-of-bounds is pointing to scratch. Remove the valid flag as it is always true. v2: Expand commit msg, patch reorder (Mika) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1476360162-24062-1-git-send-email-michal.winiarski@intel.com
2016-10-14drm/i915: Fix mismatched INIT power domain disabling during suspendImre Deak
Currently the display INIT power domain disabling/enabling happens in a mismatched way in the suspend/resume_early hooks respectively. This can leave display power wells incorrectly disabled in the resume hook if the suspend sequence is aborted for some reason resulting in the suspend/resume hooks getting called but the suspend_late/resume_early hooks being skipped. In particular this change fixes "Unclaimed read from register 0x1e1204" on BYT/BSW triggered from i915_drm_resume()-> intel_pps_unlock_regs_wa() when suspending with /sys/power/pm_test set to devices. Fixes: 85e90679335f ("drm/i915: disable power wells on suspend") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: David Weinehall <david.weinehall@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476358446-11621-1-git-send-email-imre.deak@intel.com
2016-10-14drm/i915: Make IS_GEN macros only take dev_privTvrtko Ursulin
Saves 1416 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476352990-2504-1-git-send-email-tvrtko.ursulin@linux.intel.com
2016-10-14drm/i915: Make INTEL_GEN only take dev_privTvrtko Ursulin
Saves 968 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) v3: Rebase. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make IS_VALLEYVIEW only take dev_privTvrtko Ursulin
Saves 944 bytes of .rodata strings and 128 bytes of .text. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make IS_CHERRYVIEW only take dev_privTvrtko Ursulin
Saves 864 bytes of .rodata strings and ~100 of .text. v2: Add parantheses around dev_priv. (Ville Syrjala) v3: Rebase. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make IS_G4X only take dev_privTvrtko Ursulin
Saves 472 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make HAS_L3_DPF only take dev_privTvrtko Ursulin
Saves 472 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make IS_BROXTON only take dev_privTvrtko Ursulin
Saves 1392 bytes of .rodata strings. Also change a few function/macro prototypes in i915_gem_gtt.c from dev to dev_priv where it made more sense to do so. v2: Add parantheses around dev_priv. (Ville Syrjala) v3: Mention function prototype changes. (David Weinehall) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
2016-10-14drm/i915: Make IS_SKYLAKE only take dev_privTvrtko Ursulin
Saves 1016 bytes of .rodata strings and couple hundred of .text. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make IS_KABYLAKE only take dev_privTvrtko Ursulin
Saves 1320 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make IS_HASWELL only take dev_privTvrtko Ursulin
Saves 2432 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make IS_BROADWELL only take dev_privTvrtko Ursulin
Saves 1808 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make IS_IVYBRIDGE only take dev_privTvrtko Ursulin
Saves 848 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) v3: Rebase. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make INTEL_DEVID only take dev_privTvrtko Ursulin
Saves 4472 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make IS_GEN-range macro only take dev_privTvrtko Ursulin
Saves 944 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Do not use INTEL_INFO(dev_priv)->ring_mask inside WARNsTvrtko Ursulin
Saves 1520 bytes of .rodata strings. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make HAS_RUNTIME_PM only take dev_privTvrtko Ursulin
Saves 960 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make HAS_GMCH_DISPLAY only take dev_privTvrtko Ursulin
More .rodata string saving by avoid __I915__ magic inside WARNs. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make INTEL_PCH_TYPE & co only take dev_privTvrtko Ursulin
This saves 1872 bytes of .rodata strings. v2: * Rebase. * Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make HAS_DDI and HAS_PCH_LPT_LP only take dev_privTvrtko Ursulin
This saves 3248 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915/gvt: Support GVT-g on SkylakeZhi Wang
GVT-g supports Intel Skylake platform. Enable it. Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-14drm/i915/gvt: vGPU command scannerZhi Wang
This patch introduces a command scanner to scan guest command buffers. Signed-off-by: Yulei Zhang <yulei.zhang@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-14drm/i915/gvt: vGPU context switchZhi Wang
As different VM may configure different render MMIOs when executing workload, to schedule workloads between different VM, the render MMIOs have to be switched. Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-14drm/i915/gvt: vGPU schedule policy frameworkZhi Wang
This patch introduces a vGPU schedule policy framework, with a timer based schedule policy module for now Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-14drm/i915/gvt: vGPU workload schedulerZhi Wang
This patch introduces the vGPU workload scheduler routines. GVT workload scheduler is responsible for picking and executing GVT workload from current scheduled vGPU. Before the workload is submitted to host i915, the guest execlist context will be shadowed in the host GVT shadow context. the instructions in guest ring buffer will be copied into GVT shadow ring buffer. Then GVT-g workload scheduler will scan the instructions in guest ring buffer and submit it to host i915. Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-14drm/i915/gvt: vGPU workload submissionZhi Wang
This patch introduces the vGPU workload submission logics. Under virtualization environment, guest will submit workload through virtual execlist submit port. The submitted workload load will be wrapped into an gvt workload which will be picked by GVT workload scheduler and executed on host i915 later. Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-14drm/i915/gvt: vGPU execlist virtualizationZhi Wang
This patch introduces the vGPU execlist virtualization. Under virtulization environment, HW execlist interface are fully emulated including virtual CSB emulation, virtual execlist emulation. The framework will emulate the virtual CSB according to the guest workload running status Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-14drm/i915/gvt: vGPU display virtualizationZhi Wang
This patch introduces the GVT-g display virtualization. It consists a collection of display MMIO handlers, like power well register handler, pipe register handler, plane register handler, which will emulate all display MMIOs behavior to support virtual mode setting sequence for guest. Signed-off-by: Bing Niu <bing.niu@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-14drm/i915/gvt: vGPU MMIO virtualizationZhi Wang
This patch introduces the generic vGPU MMIO emulation intercept framework. The MPT modules will request GVT-g core logic to emulate MMIO read/write through IO emulation operations callback when hypervisor trapped a guest GTTMMIO read/write. Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-14drm/i915/gvt: vGPU PCI configuration space virtualizationZhi Wang
This patch introduces vGPU PCI configuration space virtualization. - Adjust the trapped GPFN(Guest Page Frame Number) window of virtual GEN PCI BAR 0 when guest initializes PCI BAR 0 address. - Emulate OpRegion when guest touches OpRegion. - Pass-through a part of aperture to guest when guest initializes aperture BAR. Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-14drm/i915/gvt: vGPU graphics memory virtualizationZhi Wang
The vGPU graphics memory emulation framework is responsible for graphics memory table virtualization. Under virtualization environment, a VM will populate the page table entry with guest page frame number(GPFN/GFN), while HW needs a page table filled with MFN(Machine frame number). The relationship between GFN and MFN(Machine frame number) is managed by hypervisor, while GEN HW doesn't have such knowledge to translate a GFN. To solve this gap, shadow GGTT/PPGTT page table is introdcued. For GGTT, the GFN inside the guest GGTT page table entry will be translated into MFN and written into physical GTT MMIO registers when guest write virtual GTT MMIO registers. For PPGTT, a shadow PPGTT page table will be created and write-protected translated from guest PPGTT page table. And the shadow page table root pointers will be written into the shadow context after a guest workload is shadowed. vGPU graphics memory emulation framework consists: - Per-GEN HW platform page table entry bits extract/de-extract routines. - GTT MMIO register emulation handlers, which will call hypercall to do GFN->MFN translation when guest write GTT MMIO register - PPGTT shadow page table routines, e.g. shadow create/destroy/out-of-sync Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-14drm/i915/gvt: vGPU interrupt virtualization.Zhi Wang
This patch introduces vGPU interrupt emulation framework. The vGPU intrerrupt emulation framework is an event-based interrupt emulation framework. It's responsible for emulating GEN hardware interrupts during emulating other HW behaviour. It consists several components: - Descriptions of interrupt register bit - Upper level <-> lower level interrupt mapping - GEN HW IER/IMR/IIR register emulation routines - Event-based interrupt propagation interface When a GVT-g component wants to inject an interrupt to a VM during a emulation, first it should specify the event needs to be emulated and the framework will deal with the rest of emulation: - Generating related virtual IIR bit according to virtual IER and IMRs, - Generate related virtual upper level virtual IIR bit accodring to the per-platform interrupt mapping - Injecting a MSI to VM Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-14drm/i915/gvt: trace stubZhi Wang
v2: - Make checkpatch.pl happy(Joonas) Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-14drm/i915/gvt: Introduce basic vGPU life cycle managementZhi Wang
A vGPU represents a virtual Intel GEN hardware, which consists following virtual resources: - Configuration space (virtualized) - HW registers (virtualized) - GGTT memory space (partitioned) - GPU page table (shadowed) - Fence registers (partitioned) * virtualized: fully emulated by GVT-g. * partitioned: Only a part of the HW resource is allowed to be accessed by VM. * shadowed: Resource needs to be translated and shadowed before getting applied into HW. This patch introduces vGPU life cycle management framework, which is responsible for creating/destroying a vGPU and preparing/free resources related to a vGPU. Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-10-14drm/i915/gvt: golden virtual HW state managementZhi Wang
Each vGPU expects a golden virtual HW state, which is just the state after system is freshly powered on. GVT-g will try to load the golden virtual HW state via kernel firmware interface. Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-22 06:39:25 +0000