summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-02can: ems_pci: Add IRQ enableGerhard Uttenthaler
Add IRQ enable Signed-off-by: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com> Link: https://lore.kernel.org/all/20230120112616.6071-7-uttenthaler@ems-wuensche.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: ems_pci: Initialize CAN controller base addressesGerhard Uttenthaler
Add CAN controller base registers Signed-off-by: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com> Link: https://lore.kernel.org/all/20230120112616.6071-6-uttenthaler@ems-wuensche.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: ems_pci: Add read/write register and post irq functionsGerhard Uttenthaler
Add functions to read and write SJA1000 registers and also the post irq routine Signed-off-by: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com> Link: https://lore.kernel.org/all/20230120112616.6071-5-uttenthaler@ems-wuensche.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: ems_pci: Initialize BAR registersGerhard Uttenthaler
Fix the base register defines and their usage for all three card versions Signed-off-by: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com> Link: https://lore.kernel.org/all/20230120112616.6071-4-uttenthaler@ems-wuensche.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: ems_pci: Add Asix AX99100 definitionsGerhard Uttenthaler
Add Asix AX99100 PCI IDs and add the v3 to the ems_pci_tbl. Add define for maximum CAN channel count Signed-off-by: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com> Link: https://lore.kernel.org/all/20230120112616.6071-3-uttenthaler@ems-wuensche.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: ems_pci: Fix code style, copyright and email addressGerhard Uttenthaler
Fix code style complained by checkpatch.pl, add Copyright and fix email address Signed-off-by: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com> Link: https://lore.kernel.org/all/20230120112616.6071-2-uttenthaler@ems-wuensche.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02Merge patch series "can: rcar_canfd: Add support for R-Car V4H systems"Marc Kleine-Budde
Geert Uytterhoeven <geert+renesas@glider.be> says: This patch series adds support for the CAN-FD interface on the Renesas R-Car V4H (R8A779G0) SoC and support for CAN transceivers described as PHYs to the R-Car CAN-FD driver. It includes several fixes for issues (some minor) detected while adding the support and during testing. More details can be found in the individual patches. This has been tested on the Renesas White-Hawk development board using cansend, candump, and canfdtest: - Channel 0 uses an NXP TJR1443AT CAN transceiver, and works fine, - Channels 1-7 use Microchip MCP2558FD-H/SN CAN transceivers (not mounted for channels 4-7), which do not need explicit description. While channel 1 works fine, channels 2-3 do not seem to work. Hence despite the new fixes, the test results are similar to what Ulrich Hecht reported for R-Car V3U on the Falcon development board before, i.e. only channels 0 and 1 work (FTR, [2] does not help). Whether this is a CAN-FD driver issue, a pin control issue, an IP core issue, or an SoC integration issue is still to be seen... [1] https://lore.kernel.org/all/f53a1bcca637ceeafb04ce3540a605532d3bc34a.1674036164.git.geert+renesas@glider.be [2] commit e3e5bccc92446048 ("can: rcar_canfd: rcar_canfd_configure_afl_rules(): Fix Rx FIFO entry setting") in renesas-bsp/v5.10.147/rcar-5.2.0.rc3. Link: https://lore.kernel.org/all/cover.1674499048.git.geert+renesas@glider.be [mkl: applying patches 1...11 only] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: rcar_canfd: Add helper variable devGeert Uytterhoeven
rcar_canfd_channel_probe() and rcar_canfd_probe() have many users of "pdev->dev". Introduce shorthands to simplify the code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/2965edc7992ab54dc6c862910775f3466fca6b29.1674499048.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: rcar_canfd: Sort included header filesGeert Uytterhoeven
This may avoid conflicts when adding or removing files in the future. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/f7fa8090487c6e05b2c7f89542e0a1bd045356f1.1674499048.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: rcar_canfd: Fix R-Car Gen4 CFCC.CFTML field widthGeert Uytterhoeven
On R-Car Gen4 CAN_FD variants, the Common FIFO TX Message Buffer Link (CFTML) field in the Common FIFO Configuration / Control Register (CCFC) register is one bit wider than on older variants. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/9c37aaa799a2391be272dbaa474379cf9a7af147.1674499048.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: rcar_canfd: Fix R-Car Gen4 DCFG.DSJW field widthGeert Uytterhoeven
On R-Car Gen4 CAN_FD variants, the Data Bit Rate Resynchronization Jump Width Control (DSJW) field in the Channel n Data Bitrate Configuration Register (DCFG) register is one bit wider than on older variants. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/c4e8bc220bf87e6c7e375f7a2ce51e2aa89ea8a7.1674499048.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: rcar_canfd: Add support for R-Car Gen4Geert Uytterhoeven
Despite the name, R-Car V3U (R8A779A0) was the first member of the R-Car Gen4 family. Generalize the support for R-Car V3U to other SoCs in the R-Car Gen4 family by adding a family-specific compatible value, and by replacing all references to "V3U" by "Gen4". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/61f6f34eb7bcc62ff604add98f1bcd2d2584187d.1674499048.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: rcar_canfd: Abstract out DCFG address differencesGeert Uytterhoeven
Abstract the different addresses for the Channel n Data Bitrate Configuration Register (DCFG) in the definition of the register macro, like is already done for other register definitions, to simplify code accessing this register. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/13e02d710dac3ddef73aa4be2b995766db9b6b4d.1674499048.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: rcar_canfd: Fix R-Car V3U GAFLCFG field accessesGeert Uytterhoeven
Each Global Acceptance Filter List Configuration Register (GAFLCFG) contains two fields, and stores the number of channel rules for one channel pair. As R-Car V3U and later can have more than 2 channels, the field selection should be based on the LSB (even or odd) of the channel number, instead of on the full channel number. Fixes: 45721c406dcf50d4 ("can: rcar_canfd: Add support for r8a779a0 SoC") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/36bcf0ffb96d6aaed970751f9546b901af638bcf.1674499048.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: rcar_canfd: Fix R-Car V3U CAN mode selectionGeert Uytterhoeven
When adding support for R-Car V3U, the Global FD Configuration register (CFDGFDCFG) and the Channel-specific CAN-FD Configuration Registers (CFDCmFDCFG) were mixed up. Use the correct register, and apply the selected CAN mode to all available channels. Annotate the corresponding register bits, to make it clear they do not exist on older variants. Fixes: 45721c406dcf50d4 ("can: rcar_canfd: Add support for r8a779a0 SoC") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/388ddf312917eb9f6cc460a481f68402a876f9b5.1674499048.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02dt-bindings: can: renesas,rcar-canfd: Add transceiver supportGeert Uytterhoeven
Add support for describing CAN transceivers as PHYs. While simple CAN transceivers can do without, this is needed for CAN transceivers like NXP TJR1443 that need a configuration step (like pulling standby or enable lines), and/or impose a bitrate limit. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/all/1bd328b5c9c6cfa633b42af87550f4c7358a05c1.1674499048.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02dt-bindings: can: renesas,rcar-canfd: Document R-Car V4H supportGeert Uytterhoeven
Document support for the CAN-FD Interface on the Renesas R-Car V4H (R8A779G0) SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/all/d8158c78cc786c432df5a5e5bbad848b717aca71.1674499048.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02dt-bindings: can: renesas,rcar-canfd: R-Car V3U is R-Car Gen4Geert Uytterhoeven
Despite the name, R-Car V3U is the first member of the R-Car Gen4 family. Hence generalize this by introducing a family-specific compatible value for R-Car Gen4. While at it, replace "both channels" by "all channels", as the numbers of channels may differ from two. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/all/4dea4b7dd76d4f859ada85f97094b7adeef5169f.1674499048.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02ASoC: SOF: amd: Fix for handling spurious interrupts from DSPV sujith kumar Reddy
As interrupts are Level-triggered,unless and until we deassert the register the interrupts are generated which causes spurious interrupts unhandled. Now we deasserted the interrupt at top half which solved the below "nobody cared" warning. warning reported in dmesg: irq 80: nobody cared (try booting with the "irqpoll" option) CPU: 5 PID: 2735 Comm: irq/80-AudioDSP Not tainted 5.15.86-15817-g4c19f3e06d49 #1 1bd3fd932cf58caacc95b0504d6ea1e3eab22289 Hardware name: Google Skyrim/Skyrim, BIOS Google_Skyrim.15303.0.0 01/03/2023 Call Trace: <IRQ> dump_stack_lvl+0x69/0x97 __report_bad_irq+0x3a/0xae note_interrupt+0x1a9/0x1e3 handle_irq_event_percpu+0x4b/0x6e handle_irq_event+0x36/0x5b handle_fasteoi_irq+0xae/0x171 __common_interrupt+0x48/0xc4 </IRQ> handlers: acp_irq_handler [snd_sof_amd_acp] threaded [<000000007e089f34>] acp_irq_thread [snd_sof_amd_acp] Disabling IRQ #80 Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com> Link: https://lore.kernel.org/r/20230203123254.1898794-1-Vsujithkumar.Reddy@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-02can: mcp251xfd: regmap: optimizing transfer size for CRC transfers size 1Thomas Kopp
For CRC transfers with size 1 it is more efficient to use the write_safe command instead of the write_crc command. This saves the length byte on the SPI transfer. changes since v1: https://lore.kernel.org/all/20230127124258.2764-1-thomas.kopp@microchip.com - change logic to remove 1 level of indention Link: https://lore.kernel.org/all/20230202141811.2581795-1-mkl@pengutronix.de Signed-off-by: Thomas Kopp <thomas.kopp@microchip.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: isotp: check CAN address family in isotp_bind()Oliver Hartkopp
Add missing check to block non-AF_CAN binds. Syzbot created some code which matched the right sockaddr struct size but used AF_XDP (0x2C) instead of AF_CAN (0x1D) in the address family field: bind$xdp(r2, &(0x7f0000000540)={0x2c, 0x0, r4, 0x0, r2}, 0x10) ^^^^ This has no funtional impact but the userspace should be notified about the wrong address family field content. Link: https://syzkaller.appspot.com/text?tag=CrashLog&x=11ff9d8c480000 Reported-by: syzbot+5aed6c3aaba661f5b917@syzkaller.appspotmail.com Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230104201844.13168-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: gw: give feedback on missing CGW_FLAGS_CAN_IIF_TX_OK flagOliver Hartkopp
To send CAN traffic back to the incoming interface a special flag has to be set. When creating a routing job for identical interfaces without this flag the rule is created but has no effect. This patch adds an error return value in the case that the CAN interfaces are identical but the CGW_FLAGS_CAN_IIF_TX_OK flag was not set. Reported-by: Jannik Hartung <jannik.hartung@tu-bs.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230125055407.2053-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02net: dsa: Use sysfs_emit() to instead of sprintf()Bo Liu
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Bo Liu <liubo03@inspur.com> Link: https://lore.kernel.org/r/20230201081438.3151-1-liubo03@inspur.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-02Merge branch 'amd-xgbe-add-support-for-2-5gbe-and-rx-adaptation'Paolo Abeni
Raju Rangoju says: ==================== amd-xgbe: add support for 2.5GbE and rx-adaptation This patch series adds support for 2.GbE in 10GBaseT mode and rx-adaptation support for Yellow Carp devices. 1) Support for 2.5GbE: Add the necessary changes to the driver to fully recognize and enable 2.5GbE speed in 10GBaseT mode. 2) Support for rx-adaptation: In order to support the 10G backplane mode without Auto-negotiation and to support the longer-length DAC cables, it requires PHY to perform RX Adaptation sequence as mentioned in the Synopsys databook. Add the necessary changes to Yellow Carp devices to ensure seamless RX Adaptation for 10G-SFI (LONG DAC), and 10G-KR modes without Auto-Negotiation (CL72 not present) ==================== Link: https://lore.kernel.org/r/20230201054932.212700-1-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-02amd-xgbe: add support for rx-adaptationRaju Rangoju
The existing implementation for non-Autonegotiation 10G speed modes does not enable RX adaptation in the Driver and FW. The RX Equalization settings (AFE settings alone) are manually configured and the existing link-up sequence in the driver does not perform rx adaptation process as mentioned in the Synopsys databook. There's a customer request for 10G backplane mode without Auto-negotiation and for the DAC cables of more significant length that follow the non-Autonegotiation mode. These modes require PHY to perform RX Adaptation. The proposed logic adds the necessary changes to Yellow Carp devices to ensure seamless RX Adaptation for 10G-SFI (LONG DAC) and 10G-KR without AN (CL72 not present). The RX adaptation core algorithm is executed by firmware, however, to achieve that a new mailbox sub-command is required to be sent by the driver. Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-02amd-xgbe: add 2.5GbE support to 10G BaseT modeRaju Rangoju
Add support to the driver to fully recognize and enable 2.5GbE speed in 10GBaseT mode. Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-02ceph: blocklist the kclient when receiving corrupted snap traceXiubo Li
When received corrupted snap trace we don't know what exactly has happened in MDS side. And we shouldn't continue IOs and metadatas access to MDS, which may corrupt or get incorrect contents. This patch will just block all the further IO/MDS requests immediately and then evict the kclient itself. The reason why we still need to evict the kclient just after blocking all the further IOs is that the MDS could revoke the caps faster. Link: https://tracker.ceph.com/issues/57686 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-02-02ceph: move mount state enum to super.hXiubo Li
These flags are only used in ceph filesystem in fs/ceph, so just move it to the place it should be. Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-02-02selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy ↵Andrei Gherzan
benchmarking The test tool can check that the zerocopy number of completions value is valid taking into consideration the number of datagram send calls. This can catch the system into a state where the datagrams are still in the system (for example in a qdisk, waiting for the network interface to return a completion notification, etc). This change adds a retry logic of computing the number of completions up to a configurable (via CLI) timeout (default: 2 seconds). Fixes: 79ebc3c26010 ("net/udpgso_bench_tx: options to exercise TX CMSG") Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230201001612.515730-4-andrei.gherzan@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-02selftests: net: udpgso_bench: Fix racing bug between the rx/tx programsAndrei Gherzan
"udpgro_bench.sh" invokes udpgso_bench_rx/udpgso_bench_tx programs subsequently and while doing so, there is a chance that the rx one is not ready to accept socket connections. This racing bug could fail the test with at least one of the following: ./udpgso_bench_tx: connect: Connection refused ./udpgso_bench_tx: sendmsg: Connection refused ./udpgso_bench_tx: write: Connection refused This change addresses this by making udpgro_bench.sh wait for the rx program to be ready before firing off the tx one - up to a 10s timeout. Fixes: 3a687bef148d ("selftests: udp gso benchmark") Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230201001612.515730-3-andrei.gherzan@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-02selftests: net: udpgso_bench_rx/tx: Stop when wrong CLI args are providedAndrei Gherzan
Leaving unrecognized arguments buried in the output, can easily hide a CLI/script typo. Avoid this by exiting when wrong arguments are provided to the udpgso_bench test programs. Fixes: 3a687bef148d ("selftests: udp gso benchmark") Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230201001612.515730-2-andrei.gherzan@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-02selftests: net: udpgso_bench_rx: Fix 'used uninitialized' compiler warningAndrei Gherzan
This change fixes the following compiler warning: /usr/include/x86_64-linux-gnu/bits/error.h:40:5: warning: ‘gso_size’ may be used uninitialized [-Wmaybe-uninitialized] 40 | __error_noreturn (__status, __errnum, __format, __va_arg_pack ()); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ udpgso_bench_rx.c: In function ‘main’: udpgso_bench_rx.c:253:23: note: ‘gso_size’ was declared here 253 | int ret, len, gso_size, budget = 256; Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO") Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230201001612.515730-1-andrei.gherzan@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-02Merge branch 'net-sched-transition-act_pedit-to-rcu-and-percpu-stats'Paolo Abeni
Pedro Tammela says: ==================== net/sched: transition act_pedit to rcu and percpu stats The software pedit action didn't get the same love as some of the other actions and it's still using spinlocks and shared stats. Therefore, transition the action to rcu and percpu stats which improves the action's performance. We test this change with a very simple packet forwarding setup: tc filter add dev ens2f0 ingress protocol ip matchall \ action pedit ex munge eth src set b8:ce:f6:4b:68:35 pipe \ action pedit ex munge eth dst set ac:1f:6b:e4:ff:93 pipe \ action mirred egress redirect dev ens2f1 tc filter add dev ens2f1 ingress protocol ip matchall \ action pedit ex munge eth src set b8:ce:f6:4b:68:34 pipe \ action pedit ex munge eth dst set ac:1f:6b:e4:ff:92 pipe \ action mirred egress redirect dev ens2f0 Using TRex with a http-like profile, in our setup with a 25G NIC and a 26 cores Intel CPU, we observe the following in perf: before: 11.59% 2.30% [kernel] [k] tcf_pedit_act 2.55% tcf_pedit_act 8.38% _raw_spin_lock 6.43% native_queued_spin_lock_slowpath after: 1.46% 1.46% [kernel] [k] tcf_pedit_act tdc results for pedit after the patch: 1..69 ok 1 319a - Add pedit action that mangles IP TTL ok 2 7e67 - Replace pedit action with invalid goto chain ok 3 377e - Add pedit action with RAW_OP offset u32 ok 4 a0ca - Add pedit action with RAW_OP offset u32 (INVALID) ok 5 dd8a - Add pedit action with RAW_OP offset u16 u16 ok 6 53db - Add pedit action with RAW_OP offset u16 (INVALID) ok 7 5c7e - Add pedit action with RAW_OP offset u8 add value ok 8 2893 - Add pedit action with RAW_OP offset u8 quad ok 9 3a07 - Add pedit action with RAW_OP offset u8-u16-u8 ok 10 ab0f - Add pedit action with RAW_OP offset u16-u8-u8 ok 11 9d12 - Add pedit action with RAW_OP offset u32 set u16 clear u8 invert ok 12 ebfa - Add pedit action with RAW_OP offset overflow u32 (INVALID) ok 13 f512 - Add pedit action with RAW_OP offset u16 at offmask shift set ok 14 c2cb - Add pedit action with RAW_OP offset u32 retain value ok 15 1762 - Add pedit action with RAW_OP offset u8 clear value ok 16 bcee - Add pedit action with RAW_OP offset u8 retain value ok 17 e89f - Add pedit action with RAW_OP offset u16 retain value ok 18 c282 - Add pedit action with RAW_OP offset u32 clear value ok 19 c422 - Add pedit action with RAW_OP offset u16 invert value ok 20 d3d3 - Add pedit action with RAW_OP offset u32 invert value ok 21 57e5 - Add pedit action with RAW_OP offset u8 preserve value ok 22 99e0 - Add pedit action with RAW_OP offset u16 preserve value ok 23 1892 - Add pedit action with RAW_OP offset u32 preserve value ok 24 4b60 - Add pedit action with RAW_OP negative offset u16/u32 set value ok 25 a5a7 - Add pedit action with LAYERED_OP eth set src ok 26 86d4 - Add pedit action with LAYERED_OP eth set src & dst ok 27 f8a9 - Add pedit action with LAYERED_OP eth set dst ok 28 c715 - Add pedit action with LAYERED_OP eth set src (INVALID) ok 29 8131 - Add pedit action with LAYERED_OP eth set dst (INVALID) ok 30 ba22 - Add pedit action with LAYERED_OP eth type set/clear sequence ok 31 dec4 - Add pedit action with LAYERED_OP eth set type (INVALID) ok 32 ab06 - Add pedit action with LAYERED_OP eth add type ok 33 918d - Add pedit action with LAYERED_OP eth invert src ok 34 a8d4 - Add pedit action with LAYERED_OP eth invert dst ok 35 ee13 - Add pedit action with LAYERED_OP eth invert type ok 36 7588 - Add pedit action with LAYERED_OP ip set src ok 37 0fa7 - Add pedit action with LAYERED_OP ip set dst ok 38 5810 - Add pedit action with LAYERED_OP ip set src & dst ok 39 1092 - Add pedit action with LAYERED_OP ip set ihl & dsfield ok 40 02d8 - Add pedit action with LAYERED_OP ip set ttl & protocol ok 41 3e2d - Add pedit action with LAYERED_OP ip set ttl (INVALID) ok 42 31ae - Add pedit action with LAYERED_OP ip ttl clear/set ok 43 486f - Add pedit action with LAYERED_OP ip set duplicate fields ok 44 e790 - Add pedit action with LAYERED_OP ip set ce, df, mf, firstfrag, nofrag fields ok 45 cc8a - Add pedit action with LAYERED_OP ip set tos ok 46 7a17 - Add pedit action with LAYERED_OP ip set precedence ok 47 c3b6 - Add pedit action with LAYERED_OP ip add tos ok 48 43d3 - Add pedit action with LAYERED_OP ip add precedence ok 49 438e - Add pedit action with LAYERED_OP ip clear tos ok 50 6b1b - Add pedit action with LAYERED_OP ip clear precedence ok 51 824a - Add pedit action with LAYERED_OP ip invert tos ok 52 106f - Add pedit action with LAYERED_OP ip invert precedence ok 53 6829 - Add pedit action with LAYERED_OP beyond ip set dport & sport ok 54 afd8 - Add pedit action with LAYERED_OP beyond ip set icmp_type & icmp_code ok 55 3143 - Add pedit action with LAYERED_OP beyond ip set dport (INVALID) ok 56 815c - Add pedit action with LAYERED_OP ip6 set src ok 57 4dae - Add pedit action with LAYERED_OP ip6 set dst ok 58 fc1f - Add pedit action with LAYERED_OP ip6 set src & dst ok 59 6d34 - Add pedit action with LAYERED_OP ip6 dst retain value (INVALID) ok 60 94bb - Add pedit action with LAYERED_OP ip6 traffic_class ok 61 6f5e - Add pedit action with LAYERED_OP ip6 flow_lbl ok 62 6795 - Add pedit action with LAYERED_OP ip6 set payload_len, nexthdr, hoplimit ok 63 1442 - Add pedit action with LAYERED_OP tcp set dport & sport ok 64 b7ac - Add pedit action with LAYERED_OP tcp sport set (INVALID) ok 65 cfcc - Add pedit action with LAYERED_OP tcp flags set ok 66 3bc4 - Add pedit action with LAYERED_OP tcp set dport, sport & flags fields ok 67 f1c8 - Add pedit action with LAYERED_OP udp set dport & sport ok 68 d784 - Add pedit action with mixed RAW/LAYERED_OP #1 ok 69 70ca - Add pedit action with mixed RAW/LAYERED_OP #2 ==================== Link: https://lore.kernel.org/r/20230131190512.3805897-1-pctammela@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-02net/sched: simplify tcf_pedit_actPedro Tammela
Remove the check for a negative number of keys as this cannot ever happen Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-02net/sched: transition act_pedit to rcu and percpu statsPedro Tammela
The software pedit action didn't get the same love as some of the other actions and it's still using spinlocks and shared stats in the datapath. Transition the action to rcu and percpu stats as this improves the action's performance dramatically on multiple cpu deployments. Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-02Merge tag 'rxrpc-next-20230131' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== Here's the fifth part of patches in the process of moving rxrpc from doing a lot of its stuff in softirq context to doing it in an I/O thread in process context and thereby making it easier to support a larger SACK table. The full description is in the description for the first part[1] which is now upstream. The second and third parts are also upstream[2]. A subset of the original fourth part[3] got applied as a fix for a race[4]. The fifth part includes some cleanups: (1) Miscellaneous trace header cleanups: fix a trace string, display the security index in rx_packet rather than displaying the type twice, remove some whitespace to make checkpatch happier and remove some excess tabulation. (2) Convert ->recvmsg_lock to a spinlock as it's only ever locked exclusively. (3) Make ->ackr_window and ->ackr_nr_unacked non-atomic as they're only used in the I/O thread. (4) Don't use call->tx_lock to access ->tx_buffer as that is only accessed inside the I/O thread. sendmsg() loads onto ->tx_sendmsg and the I/O thread decants from that to the buffer. (5) Remove local->defrag_sem as DATA packets are transmitted serially by the I/O thread. (6) Remove the service connection bundle is it was only used for its channel_lock - which has now gone. And some more significant changes: (7) Add a debugging option to allow a delay to be injected into packet reception to help investigate the behaviour over longer links than just a few cm. (8) Generate occasional PING ACKs to probe for RTT information during a receive heavy call. (9) Simplify the SACK table maintenance and ACK generation. Now that both parts are done in the same thread, there's no possibility of a race and no need to try and be cunning to avoid taking a BH spinlock whilst copying the SACK table (which in the future will be up to 2K) and no need to rotate the copy to fit the ACK packet table. (10) Use SKB_CONSUMED when freeing received DATA packets (stop dropwatch complaining). * tag 'rxrpc-next-20230131' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: rxrpc: Kill service bundle rxrpc: Change rx_packet tracepoint to display securityIndex not type twice rxrpc: Show consumed and freed packets as non-dropped in dropwatch rxrpc: Remove local->defrag_sem rxrpc: Don't lock call->tx_lock to access call->tx_buffer rxrpc: Simplify ACK handling rxrpc: De-atomic call->ackr_window and call->ackr_nr_unacked rxrpc: Generate extra pings for RTT during heavy-receive call rxrpc: Allow a delay to be injected into packet reception rxrpc: Convert call->recvmsg_lock to a spinlock rxrpc: Shrink the tabulation in the rxrpc trace header a bit rxrpc: Remove whitespace before ')' in trace header rxrpc: Fix trace string ==================== Link: https://lore.kernel.org/all/20230131171227.3912130-1-dhowells@redhat.com/ Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-02ata: libata: Fix sata_down_spd_limit() when no link speed is reportedDamien Le Moal
Commit 2dc0b46b5ea3 ("libata: sata_down_spd_limit should return if driver has not recorded sstatus speed") changed the behavior of sata_down_spd_limit() to return doing nothing if a drive does not report a current link speed, to avoid reducing the link speed to the lowest 1.5 Gbps speed. However, the change assumed that a speed was recorded before probing (e.g. before a suspend/resume) and set in link->sata_spd. This causes problems with adapters/drives combination failing to establish a link speed during probe autonegotiation. One example reported of this problem is an mvebu adapter with a 3Gbps port-multiplier box: autonegotiation fails, leaving no recorded link speed and no reported current link speed. Probe retries also fail as no action is taken by sata_set_spd() after each retry. Fix this by returning early in sata_down_spd_limit() only if we do have a recorded link speed, that is, if link->sata_spd is not 0. With this fix, a failed probe not leading to a recorded link speed is retried at the lower 1.5 Gbps speed, with the link speed potentially increased later on the second revalidate of the device if the device reports that it supports higher link speeds. Reported-by: Marius Dinu <marius@psihoexpert.ro> Fixes: 2dc0b46b5ea3 ("libata: sata_down_spd_limit should return if driver has not recorded sstatus speed") Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Marius Dinu <marius@psihoexpert.ro> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2023-02-02selftests/bpf: Remove duplicate include header in xdp_hw_metadataYe Xingchen
The linux/net_tstamp.h is included more than once, thus clean it up. Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/202301311440516312161@zte.com.cn
2023-02-02selftests/bpf: Don't refill on completion in xdp_metadataStanislav Fomichev
We only need to consume TX completion instead of refilling 'fill' ring. It's currently not an issue because we never RX more than 8 packets. Fixes: e2a46d54d7a1 ("selftests/bpf: Verify xdp_metadata xdp->af_xdp path") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230201233640.367646-1-sdf@google.com
2023-02-02platform/x86: touchscreen_dmi: Add Chuwi Vi8 (CWI501) DMI matchHans de Goede
Add a DMI match for the CWI501 version of the Chuwi Vi8 tablet, pointing to the same chuwi_vi8_data as the existing CWI506 version DMI match. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230202103413.331459-1-hdegoede@redhat.com
2023-02-02powerpc: Don't select ARCH_WANTS_NO_INSTRMichael Ellerman
Commit 41b7a347bf14 ("powerpc: Book3S 64-bit outline-only KASAN support") added a select of ARCH_WANTS_NO_INSTR, because it also added some uses of noinstr. However noinstr is always defined, regardless of ARCH_WANTS_NO_INSTR, so there's no need to select it just for that. As PeterZ says [1]: Note that by selecting ARCH_WANTS_NO_INSTR you effectively state to abide by its rules. As of now the powerpc code does not abide by those rules, and trips some new warnings added by Peter in linux-next. So until the code can be fixed to avoid those warnings, disable ARCH_WANTS_NO_INSTR. Note that ARCH_WANTS_NO_INSTR is also used to gate building KCOV and parts of KCSAN. However none of the noinstr annotations in powerpc were added for KCOV or KCSAN, instead instrumentation is blocked at the file level using KCOV_INSTRUMENT_foo.o := n. [1]: https://lore.kernel.org/linuxppc-dev/Y9t6yoafrO5YqVgM@hirez.programming.kicks-ass.net Reported-by: Sachin Sant <sachinp@linux.ibm.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2023-02-02usb: typec: ucsi: Don't attempt to resume the ports before they existHeikki Krogerus
This will fix null pointer dereference that was caused by the driver attempting to resume ports that were not yet registered. Fixes: e0dced9c7d47 ("usb: typec: ucsi: Resume in separate work") Cc: <stable@vger.kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216697 Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230131141518.78215-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-02can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing ↵Marc Kleine-Budde
tx_obj_num_coalesce_irq If the a new ring layout is set, the max coalesced frames for RX and TX are re-calculated, too. Add the missing assignment of the newly calculated TX max coalesced frames. Fixes: 656fc12ddaf8 ("can: mcp251xfd: add TX IRQ coalescing ethtool support") Link: https://lore.kernel.org/all/20230130154334.1578518-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: isotp: split tx timer into transmission and timeoutOliver Hartkopp
The timer for the transmission of isotp PDUs formerly had two functions: 1. send two consecutive frames with a given time gap 2. monitor the timeouts for flow control frames and the echo frames This led to larger txstate checks and potentially to a problem discovered by syzbot which enabled the panic_on_warn feature while testing. The former 'txtimer' function is split into 'txfrtimer' and 'txtimer' to handle the two above functionalities with separate timer callbacks. The two simplified timers now run in one-shot mode and make the state transitions (especially with isotp_rcv_echo) better understandable. Fixes: 866337865f37 ("can: isotp: fix tx state handling for echo tx processing") Reported-by: syzbot+5aed6c3aaba661f5b917@syzkaller.appspotmail.com Cc: stable@vger.kernel.org # >= v6.0 Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230104145701.2422-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: isotp: handle wait_event_interruptible() return valuesOliver Hartkopp
When wait_event_interruptible() has been interrupted by a signal the tx.state value might not be ISOTP_IDLE. Force the state machines into idle state to inhibit the timer handlers to continue working. Fixes: 866337865f37 ("can: isotp: fix tx state handling for echo tx processing") Cc: stable@vger.kernel.org Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230112192347.1944-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: raw: fix CAN FD frame transmissions over CAN XL devicesOliver Hartkopp
A CAN XL device is always capable to process CAN FD frames. The former check when sending CAN FD frames relied on the existence of a CAN FD device and did not check for a CAN XL device that would be correct too. With this patch the CAN FD feature is enabled automatically when CAN XL is switched on - and CAN FD cannot be switch off while CAN XL is enabled. This precondition also leads to a clean up and reduction of checks in the hot path in raw_rcv() and raw_sendmsg(). Some conditions are reordered to handle simple checks first. changes since v1: https://lore.kernel.org/all/20230131091012.50553-1-socketcan@hartkopp.net - fixed typo: devive -> device changes since v2: https://lore.kernel.org/all/20230131091824.51026-1-socketcan@hartkopp.net/ - reorder checks in if statements to handle simple checks first Fixes: 626332696d75 ("can: raw: add CAN XL support") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230131105613.55228-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivateZiyang Xuan
The conclusion "j1939_session_deactivate() should be called with a session ref-count of at least 2" is incorrect. In some concurrent scenarios, j1939_session_deactivate can be called with the session ref-count less than 2. But there is not any problem because it will check the session active state before session putting in j1939_session_deactivate_locked(). Here is the concurrent scenario of the problem reported by syzbot and my reproduction log. cpu0 cpu1 j1939_xtp_rx_eoma j1939_xtp_rx_abort_one j1939_session_get_by_addr [kref == 2] j1939_session_get_by_addr [kref == 3] j1939_session_deactivate [kref == 2] j1939_session_put [kref == 1] j1939_session_completed j1939_session_deactivate WARN_ON_ONCE(kref < 2) ===================================================== WARNING: CPU: 1 PID: 21 at net/can/j1939/transport.c:1088 j1939_session_deactivate+0x5f/0x70 CPU: 1 PID: 21 Comm: ksoftirqd/1 Not tainted 5.14.0-rc7+ #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:j1939_session_deactivate+0x5f/0x70 Call Trace: j1939_session_deactivate_activate_next+0x11/0x28 j1939_xtp_rx_eoma+0x12a/0x180 j1939_tp_recv+0x4a2/0x510 j1939_can_recv+0x226/0x380 can_rcv_filter+0xf8/0x220 can_receive+0x102/0x220 ? process_backlog+0xf0/0x2c0 can_rcv+0x53/0xf0 __netif_receive_skb_one_core+0x67/0x90 ? process_backlog+0x97/0x2c0 __netif_receive_skb+0x22/0x80 Fixes: 0c71437dd50d ("can: j1939: j1939_session_deactivate(): clarify lifetime of session object") Reported-by: syzbot+9981a614060dcee6eeca@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20210906094200.95868-1-william.xuanziyang@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-02-02usb: gadget: udc: do not clear gadget driver.busAaro Koskinen
Before the commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") gadget driver.bus was unused. For whatever reason, many UDC drivers set this field explicitly to NULL in udc_start(). With the newly added gadget bus, doing this will crash the driver during the attach. The problem was first reported, fixed and tested with OMAP UDC and g_ether. Other drivers are changed based on code analysis only. Fixes: fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") Cc: stable <stable@kernel.org> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230201220125.GD2415@darkstar.musicnaut.iki.fi Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-02hv_netvsc: Fix missed pagebuf entries in netvsc_dma_map/unmap()Michael Kelley
netvsc_dma_map() and netvsc_dma_unmap() currently check the cp_partial flag and adjust the page_count so that pagebuf entries for the RNDIS portion of the message are skipped when it has already been copied into a send buffer. But this adjustment has already been made by code in netvsc_send(). The duplicate adjustment causes some pagebuf entries to not be mapped. In a normal VM, this doesn't break anything because the mapping doesn’t change the PFN. But in a Confidential VM, dma_map_single() does bounce buffering and provides a different PFN. Failing to do the mapping causes the wrong PFN to be passed to Hyper-V, and various errors ensue. Fix this by removing the duplicate adjustment in netvsc_dma_map() and netvsc_dma_unmap(). Fixes: 846da38de0e8 ("net: netvsc: Add Isolation VM support for netvsc driver") Cc: stable@vger.kernel.org Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://lore.kernel.org/r/1675135986-254490-1-git-send-email-mikelley@microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-01octeontx2-af: Removed unnecessary debug messages.Sunil Goutham
NPC exact match feature is supported only on one silicon variant, removed debug messages which print that this feature is not available on all other silicon variants. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230201040301.1034843-1-rkannoth@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-10-02 02:23:22 +0000