| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs pagesize updates from Christian Brauner:
"This enables block sizes greater than the page size for block devices.
With this we can start supporting block devices with logical block
sizes larger than 4k.
It also allows to lift the device cache sector size support to 64k.
This allows filesystems which can use larger sector sizes up to 64k to
ensure that the filesystem will not generate writes that are smaller
than the specified sector size"
* tag 'vfs-6.15-rc1.pagesize' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
bdev: add back PAGE_SIZE block size validation for sb_set_blocksize()
bdev: use bdev_io_min() for statx block size
block/bdev: lift block size restrictions to 64k
block/bdev: enable large folio support for large logical block sizes
fs/buffer fs/mpage: remove large folio restriction
fs/mpage: use blocks_per_folio instead of blocks_per_page
fs/mpage: avoid negative shift for large blocksize
fs/buffer: remove batching from async read
fs/buffer: simplify block_read_full_folio() with bh_offset()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount namespace updates from Christian Brauner:
"This expands the ability of anonymous mount namespaces:
- Creating detached mounts from detached mounts
Currently, detached mounts can only be created from attached
mounts. This limitaton prevents various use-cases. For example, the
ability to mount a subdirectory without ever having to make the
whole filesystem visible first.
The current permission modelis:
(1) Check that the caller is privileged over the owning user
namespace of it's current mount namespace.
(2) Check that the caller is located in the mount namespace of the
mount it wants to create a detached copy of.
While it is not strictly necessary to do it this way it is
consistently applied in the new mount api. This model will also be
used when allowing the creation of detached mount from another
detached mount.
The (1) requirement can simply be met by performing the same check
as for the non-detached case, i.e., verify that the caller is
privileged over its current mount namespace.
To meet the (2) requirement it must be possible to infer the origin
mount namespace that the anonymous mount namespace of the detached
mount was created from.
The origin mount namespace of an anonymous mount is the mount
namespace that the mounts that were copied into the anonymous mount
namespace originate from.
In order to check the origin mount namespace of an anonymous mount
namespace the sequence number of the original mount namespace is
recorded in the anonymous mount namespace.
With this in place it is possible to perform an equivalent check
(2') to (2). The origin mount namespace of the anonymous mount
namespace must be the same as the caller's mount namespace. To
establish this the sequence number of the caller's mount namespace
and the origin sequence number of the anonymous mount namespace are
compared.
The caller is always located in a non-anonymous mount namespace
since anonymous mount namespaces cannot be setns()ed into. The
caller's mount namespace will thus always have a valid sequence
number.
The owning namespace of any mount namespace, anonymous or
non-anonymous, can never change. A mount attached to a
non-anonymous mount namespace can never change mount namespace.
If the sequence number of the non-anonymous mount namespace and the
origin sequence number of the anonymous mount namespace match, the
owning namespaces must match as well.
Hence, the capability check on the owning namespace of the caller's
mount namespace ensures that the caller has the ability to copy the
mount tree.
- Allow mount detached mounts on detached mounts
Currently, detached mounts can only be mounted onto attached
mounts. This limitation makes it impossible to assemble a new
private rootfs and move it into place. Instead, a detached tree
must be created, attached, then mounted open and then either moved
or detached again. Lift this restriction.
In order to allow mounting detached mounts onto other detached
mounts the same permission model used for creating detached mounts
from detached mounts can be used (cf. above).
Allowing to mount detached mounts onto detached mounts leaves three
cases to consider:
(1) The source mount is an attached mount and the target mount is
a detached mount. This would be equivalent to moving a mount
between different mount namespaces. A caller could move an
attached mount to a detached mount. The detached mount can now
be freely attached to any mount namespace. This changes the
current delegatioh model significantly for no good reason. So
this will fail.
(2) Anonymous mount namespaces are always attached fully, i.e., it
is not possible to only attach a subtree of an anoymous mount
namespace. This simplifies the implementation and reasoning.
Consequently, if the anonymous mount namespace of the source
detached mount and the target detached mount are the identical
the mount request will fail.
(3) The source mount's anonymous mount namespace is different from
the target mount's anonymous mount namespace.
In this case the source anonymous mount namespace of the
source mount tree must be freed after its mounts have been
moved to the target anonymous mount namespace. The source
anonymous mount namespace must be empty afterwards.
By allowing to mount detached mounts onto detached mounts a caller
may do the following:
fd_tree1 = open_tree(-EBADF, "/mnt", OPEN_TREE_CLONE)
fd_tree2 = open_tree(-EBADF, "/tmp", OPEN_TREE_CLONE)
fd_tree1 and fd_tree2 refer to two different detached mount trees
that belong to two different anonymous mount namespace.
It is important to note that fd_tree1 and fd_tree2 both refer to
the root of their respective anonymous mount namespaces.
By allowing to mount detached mounts onto detached mounts the
caller may now do:
move_mount(fd_tree1, "", fd_tree2, "",
MOVE_MOUNT_F_EMPTY_PATH | MOVE_MOUNT_T_EMPTY_PATH)
This will cause the detached mount referred to by fd_tree1 to be
mounted on top of the detached mount referred to by fd_tree2.
Thus, the detached mount fd_tree1 is moved from its separate
anonymous mount namespace into fd_tree2's anonymous mount
namespace.
It also means that while fd_tree2 continues to refer to the root of
its respective anonymous mount namespace fd_tree1 doesn't anymore.
This has the consequence that only fd_tree2 can be moved to another
anonymous or non-anonymous mount namespace. Moving fd_tree1 will
now fail as fd_tree1 doesn't refer to the root of an anoymous mount
namespace anymore.
Now fd_tree1 and fd_tree2 refer to separate detached mount trees
referring to the same anonymous mount namespace.
This is conceptually fine. The new mount api does allow for this to
happen already via:
mount -t tmpfs tmpfs /mnt
mkdir -p /mnt/A
mount -t tmpfs tmpfs /mnt/A
fd_tree3 = open_tree(-EBADF, "/mnt", OPEN_TREE_CLONE | AT_RECURSIVE)
fd_tree4 = open_tree(-EBADF, "/mnt/A", 0)
Both fd_tree3 and fd_tree4 refer to two different detached mount
trees but both detached mount trees refer to the same anonymous
mount namespace. An as with fd_tree1 and fd_tree2, only fd_tree3
may be moved another mount namespace as fd_tree3 refers to the root
of the anonymous mount namespace just while fd_tree4 doesn't.
However, there's an important difference between the
fd_tree3/fd_tree4 and the fd_tree1/fd_tree2 example.
Closing fd_tree4 and releasing the respective struct file will have
no further effect on fd_tree3's detached mount tree.
However, closing fd_tree3 will cause the mount tree and the
respective anonymous mount namespace to be destroyed causing the
detached mount tree of fd_tree4 to be invalid for further mounting.
By allowing to mount detached mounts on detached mounts as in the
fd_tree1/fd_tree2 example both struct files will affect each other.
Both fd_tree1 and fd_tree2 refer to struct files that have
FMODE_NEED_UNMOUNT set.
To handle this we use the fact that @fd_tree1 will have a parent
mount once it has been attached to @fd_tree2.
When dissolve_on_fput() is called the mount that has been passed in
will refer to the root of the anonymous mount namespace. If it
doesn't it would mean that mounts are leaked. So before allowing to
mount detached mounts onto detached mounts this would be a bug.
Now that detached mounts can be mounted onto detached mounts it
just means that the mount has been attached to another anonymous
mount namespace and thus dissolve_on_fput() must not unmount the
mount tree or free the anonymous mount namespace as the file
referring to the root of the namespace hasn't been closed yet.
If it had been closed yet it would be obvious because the mount
namespace would be NULL, i.e., the @fd_tree1 would have already
been unmounted. If @fd_tree1 hasn't been unmounted yet and has a
parent mount it is safe to skip any cleanup as closing @fd_tree2
will take care of all cleanup operations.
- Allow mount propagation for detached mount trees
In commit ee2e3f50629f ("mount: fix mounting of detached mounts
onto targets that reside on shared mounts") I fixed a bug where
propagating the source mount tree of an anonymous mount namespace
into a target mount tree of a non-anonymous mount namespace could
be used to trigger an integer overflow in the non-anonymous mount
namespace causing any new mounts to fail.
The cause of this was that the propagation algorithm was unable to
recognize mounts from the source mount tree that were already
propagated into the target mount tree and then reappeared as
propagation targets when walking the destination propagation mount
tree.
When fixing this I disabled mount propagation into anonymous mount
namespaces. Make it possible for anonymous mount namespace to
receive mount propagation events correctly. This is now also a
correctness issue now that we allow mounting detached mount trees
onto detached mount trees.
Mark the source anonymous mount namespace with MNTNS_PROPAGATING
indicating that all mounts belonging to this mount namespace are
currently in the process of being propagated and make the
propagation algorithm discard those if they appear as propagation
targets"
* tag 'vfs-6.15-rc1.mount.namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (21 commits)
selftests: test subdirectory mounting
selftests: add test for detached mount tree propagation
fs: namespace: fix uninitialized variable use
mount: handle mount propagation for detached mount trees
fs: allow creating detached mounts from fsmount() file descriptors
selftests: seventh test for mounting detached mounts onto detached mounts
selftests: sixth test for mounting detached mounts onto detached mounts
selftests: fifth test for mounting detached mounts onto detached mounts
selftests: fourth test for mounting detached mounts onto detached mounts
selftests: third test for mounting detached mounts onto detached mounts
selftests: second test for mounting detached mounts onto detached mounts
selftests: first test for mounting detached mounts onto detached mounts
fs: mount detached mounts onto detached mounts
fs: support getname_maybe_null() in move_mount()
selftests: create detached mounts from detached mounts
fs: create detached mounts from detached mounts
fs: add may_copy_tree()
fs: add fastpath for dissolve_on_fput()
fs: add assert for move_mount()
fs: add mnt_ns_empty() helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs nsfs updates from Christian Brauner:
"This contains non-urgent fixes for nsfs to validate ioctls before
performing any relevant operations.
We alredy did this for a few other filesystems last cycle"
* tag 'vfs-6.15-rc1.nsfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/nsfs: add ioctl validation tests
nsfs: validate ioctls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs sysv removal from Christian Brauner:
"This removes the sysv filesystem. We've discussed this various times.
It's time to try"
* tag 'vfs-6.15-rc1.sysv' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
sysv: Remove the filesystem
|
|
The cpumask should not be a local variable, since its pointer is saved
to irq_desc and may be accessed from procfs.
To fix it, use the persistent mask cpumask_of(cpu#).
Cc: stable@vger.kernel.org
Fixes: 8deec94c6040 ("net: stmmac: set IRQ affinity hint for multi MSI vectors")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250318032424.112067-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs async dir updates from Christian Brauner:
"This contains cleanups that fell out of the work from async directory
handling:
- Change kern_path_locked() and user_path_locked_at() to never return
a negative dentry. This simplifies the usability of these helpers
in various places
- Drop d_exact_alias() from the remaining place in NFS where it is
still used. This also allows us to drop the d_exact_alias() helper
completely
- Drop an unnecessary call to fh_update() from nfsd_create_locked()
- Change i_op->mkdir() to return a struct dentry
Change vfs_mkdir() to return a dentry provided by the filesystems
which is hashed and positive. This allows us to reduce the number
of cases where the resulting dentry is not positive to very few
cases. The code in these places becomes simpler and easier to
understand.
- Repack DENTRY_* and LOOKUP_* flags"
* tag 'vfs-6.15-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
doc: fix inline emphasis warning
VFS: Change vfs_mkdir() to return the dentry.
nfs: change mkdir inode_operation to return alternate dentry if needed.
fuse: return correct dentry for ->mkdir
ceph: return the correct dentry on mkdir
hostfs: store inode in dentry after mkdir if possible.
Change inode_operations.mkdir to return struct dentry *
nfsd: drop fh_update() from S_IFDIR branch of nfsd_create_locked()
nfs/vfs: discard d_exact_alias()
VFS: add common error checks to lookup_one_qstr_excl()
VFS: change kern_path_locked() and user_path_locked_at() to never return negative dentry
VFS: repack LOOKUP_ bit flags.
VFS: repack DENTRY_ flags.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs overlayfs updates from Christian Brauner:
"Currently overlayfs uses the mounter's credentials for its
override_creds() calls. That provides a consistent permission model.
This patches allows a caller to instruct overlayfs to use its
credentials instead. The caller must be located in the same user
namespace hierarchy as the user namespace the overlayfs instance will
be mounted in. This provides a consistent and simple security model.
With this it is possible to e.g., mount an overlayfs instance where
the mounter must have CAP_SYS_ADMIN but the credentials used for
override_creds() have dropped CAP_SYS_ADMIN. It also allows the usage
of custom fs{g,u}id different from the callers and other tweaks"
* tag 'vfs-6.15-rc1.overlayfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/ovl: add third selftest for "override_creds"
selftests/ovl: add second selftest for "override_creds"
selftests/filesystems: add utils.{c,h}
selftests/ovl: add first selftest for "override_creds"
ovl: allow to specify override credentials
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs iomap updates from Christian Brauner:
- Allow the filesystem to submit the writeback bios.
- Allow the filsystem to track completions on a per-bio bases
instead of the entire I/O.
- Change writeback_ops so that ->submit_bio can be done by the
filesystem.
- A new ANON_WRITE flag for writes that don't have a block number
assigned to them at the iomap level leaving the filesystem to do
that work in the submission handler.
- Incremental iterator advance
The folio_batch support for zero range where the filesystem provides
a batch of folios to process that might not be logically continguous
requires more flexibility than the current offset based iteration
currently offers.
Update all iomap operations to advance the iterator within the
operation and thus remove the need to advance from the core iomap
iterator.
- Make buffered writes work with RWF_DONTCACHE
If RWF_DONTCACHE is set for a write, mark the folios being written as
uncached. On writeback completion the pages will be dropped.
- Introduce infrastructure for large atomic writes
This will eventually be used by xfs and ext4.
* tag 'vfs-6.15-rc1.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (42 commits)
iomap: rework IOMAP atomic flags
iomap: comment on atomic write checks in iomap_dio_bio_iter()
iomap: inline iomap_dio_bio_opflags()
iomap: fix inline data on buffered read
iomap: Lift blocksize restriction on atomic writes
iomap: Support SW-based atomic writes
iomap: Rename IOMAP_ATOMIC -> IOMAP_ATOMIC_HW
xfs: flag as supporting FOP_DONTCACHE
iomap: make buffered writes work with RWF_DONTCACHE
iomap: introduce a full map advance helper
iomap: rename iomap_iter processed field to status
iomap: remove unnecessary advance from iomap_iter()
dax: advance the iomap_iter on pte and pmd faults
dax: advance the iomap_iter on dedupe range
dax: advance the iomap_iter on unshare range
dax: advance the iomap_iter on zero range
dax: push advance down into dax_iomap_iter() for read and write
dax: advance the iomap_iter in the read/write path
iomap: convert misc simple ops to incremental advance
iomap: advance the iter on direct I/O
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs pidfs updates from Christian Brauner:
- Allow retrieving exit information after a process has been reaped
through pidfds via the new PIDFD_INTO_EXIT extension for the
PIDFD_GET_INFO ioctl. Various tools need access to information about
a process/task even after it has already been reaped.
Pidfd polling allows waiting on either task exit or for a task to
have been reaped. The contract for PIDFD_INFO_EXIT is simply that
EPOLLHUP must be observed before exit information can be retrieved,
i.e., exit information is only provided once the task has been reaped
and then can be retrieved as long as the pidfd is open.
- Add PIDFD_SELF_{THREAD,THREAD_GROUP} sentinels allowing userspace to
forgo allocating a file descriptor for their own process. This is
useful in scenarios where users want to act on their own process
through pidfds and is akin to AT_FDCWD.
- Improve premature thread-group leader and subthread exec behavior
when polling on pidfds:
(1) During a multi-threaded exec by a subthread, i.e.,
non-thread-group leader thread, all other threads in the
thread-group including the thread-group leader are killed and the
struct pid of the thread-group leader will be taken over by the
subthread that called exec. IOW, two tasks change their TIDs.
(2) A premature thread-group leader exit means that the thread-group
leader exited before all of the other subthreads in the
thread-group have exited.
Both cases lead to inconsistencies for pidfd polling with
PIDFD_THREAD. Any caller that holds a PIDFD_THREAD pidfd to the
current thread-group leader may or may not see an exit notification
on the file descriptor depending on when poll is performed. If the
poll is performed before the exec of the subthread has concluded an
exit notification is generated for the old thread-group leader. If
the poll is performed after the exec of the subthread has concluded
no exit notification is generated for the old thread-group leader.
The correct behavior is to simply not generate an exit notification
on the struct pid of a subhthread exec because the struct pid is
taken over by the subthread and thus remains alive.
But this is difficult to handle because a thread-group may exit
premature as mentioned in (2). In that case an exit notification is
reliably generated but the subthreads may continue to run for an
indeterminate amount of time and thus also may exec at some point.
After this pull no exit notifications will be generated for a
PIDFD_THREAD pidfd for a thread-group leader until all subthreads
have been reaped. If a subthread should exec before no exit
notification will be generated until that task exits or it creates
subthreads and repeates the cycle.
This means an exit notification indicates the ability for the father
to reap the child.
* tag 'vfs-6.15-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (25 commits)
selftests/pidfd: third test for multi-threaded exec polling
selftests/pidfd: second test for multi-threaded exec polling
selftests/pidfd: first test for multi-threaded exec polling
pidfs: improve multi-threaded exec and premature thread-group leader exit polling
pidfs: ensure that PIDFS_INFO_EXIT is available
selftests/pidfd: add seventh PIDFD_INFO_EXIT selftest
selftests/pidfd: add sixth PIDFD_INFO_EXIT selftest
selftests/pidfd: add fifth PIDFD_INFO_EXIT selftest
selftests/pidfd: add fourth PIDFD_INFO_EXIT selftest
selftests/pidfd: add third PIDFD_INFO_EXIT selftest
selftests/pidfd: add second PIDFD_INFO_EXIT selftest
selftests/pidfd: add first PIDFD_INFO_EXIT selftest
selftests/pidfd: expand common pidfd header
pidfs/selftests: ensure correct headers for ioctl handling
selftests/pidfd: fix header inclusion
pidfs: allow to retrieve exit information
pidfs: record exit code and cgroupid at exit
pidfs: use private inode slab cache
pidfs: move setting flags into pidfs_alloc_file()
pidfd: rely on automatic cleanup in __pidfd_prepare()
...
|
|
Commit 7e2f7e25f6ff ("arch: x86: add IPC mailbox accessor function and add
SoC register access") adds a new file entry referring to the non-existent
file linux/platform_data/x86/intel_pmc_ipc.h in section INTEL PMC CORE
DRIVER rather than referring to the file
include/linux/platform_data/x86/intel_pmc_ipc.h added with this commit.
Note that it was missing 'include' in the beginning.
Adjust the file reference to the intended file.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250317092717.322862-1-lukas.bulwahn@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As a followup of my presentation in Zagreb for netdev 0x19:
icsk_clean_acked is only used by TCP when/if CONFIG_TLS_DEVICE
is enabled from tcp_ack().
Rename it to tcp_clean_acked, move it to tcp_sock structure
in the tcp_sock_read_rx for better cache locality in TCP
fast path.
Define this field only when CONFIG_TLS_DEVICE is enabled
saving 8 bytes on configs not using it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250317085313.2023214-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs pipe updates from Christian Brauner:
- Introduce struct file_operations pipeanon_fops
- Don't update {a,c,m}time for anonymous pipes to avoid the performance
costs associated with it
- Change pipe_write() to never add a zero-sized buffer
- Limit the slots in pipe_resize_ring()
- Use pipe_buf() to retrieve the pipe buffer everywhere
- Drop an always true check in anon_pipe_write()
- Cache 2 pages instead of 1
- Avoid spurious calls to prepare_to_wait_event() in ___wait_event()
* tag 'vfs-6.15-rc1.pipe' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/splice: Use pipe_buf() helper to retrieve pipe buffer
fs/pipe: Use pipe_buf() helper to retrieve pipe buffer
kernel/watch_queue: Use pipe_buf() to retrieve the pipe buffer
fs/pipe: Limit the slots in pipe_resize_ring()
wait: avoid spurious calls to prepare_to_wait_event() in ___wait_event()
pipe: cache 2 pages instead of 1
pipe: drop an always true check in anon_pipe_write()
pipe: change pipe_write() to never add a zero-sized buffer
pipe: don't update {a,c,m}time for anonymous pipes
pipe: introduce struct file_operations pipeanon_fops
|
|
When CONFIG_OF_MDIO is not defined the index for selecting the transmit
amplitude voltage for 100BASE-TX is set to 0, but it should be -1, if there
is no need to modify the transmit amplitude voltage. Move initialization of
the index from dp83822_of_init to dp8382x_probe.
Fixes: 4f3735e82d8a ("net: phy: dp83822: Add support for changing the transmit amplitude voltage")
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://patch.msgid.link/20250317-dp83822-fix-transceiver-mdio-v2-1-fb09454099a4@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When IRQs are freed, a WARN_ON is triggered as the
affinity notifier is not released.
This results in the below stack trace:
[ 484.544586] ? __warn+0x84/0x130
[ 484.544843] ? free_irq+0x5c/0x70
[ 484.545105] ? report_bug+0x18a/0x1a0
[ 484.545390] ? handle_bug+0x53/0x90
[ 484.545664] ? exc_invalid_op+0x14/0x70
[ 484.545959] ? asm_exc_invalid_op+0x16/0x20
[ 484.546279] ? free_irq+0x5c/0x70
[ 484.546545] ? free_irq+0x10/0x70
[ 484.546807] ena_free_io_irq+0x5f/0x70 [ena]
[ 484.547138] ena_down+0x250/0x3e0 [ena]
[ 484.547435] ena_destroy_device+0x118/0x150 [ena]
[ 484.547796] __ena_shutoff+0x5a/0xe0 [ena]
[ 484.548110] pci_device_remove+0x3b/0xb0
[ 484.548412] device_release_driver_internal+0x193/0x200
[ 484.548804] driver_detach+0x44/0x90
[ 484.549084] bus_remove_driver+0x69/0xf0
[ 484.549386] pci_unregister_driver+0x2a/0xb0
[ 484.549717] ena_cleanup+0xc/0x130 [ena]
[ 484.550021] __do_sys_delete_module.constprop.0+0x176/0x310
[ 484.550438] ? syscall_trace_enter+0xfb/0x1c0
[ 484.550782] do_syscall_64+0x5b/0x170
[ 484.551067] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Adding a call to `netif_napi_set_irq` with -1 as the IRQ index,
which frees the notifier.
Fixes: de340d8206bf ("net: ena: use napi's aRFS rmap notifers")
Signed-off-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250317071147.1105-1-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- Mount notifications
The day has come where we finally provide a new api to listen for
mount topology changes outside of /proc/<pid>/mountinfo. A mount
namespace file descriptor can be supplied and registered with
fanotify to listen for mount topology changes.
Currently notifications for mount, umount and moving mounts are
generated. The generated notification record contains the unique
mount id of the mount.
The listmount() and statmount() api can be used to query detailed
information about the mount using the received unique mount id.
This allows userspace to figure out exactly how the mount topology
changed without having to generating diffs of /proc/<pid>/mountinfo
in userspace.
- Support O_PATH file descriptors with FSCONFIG_SET_FD in the new mount
api
- Support detached mounts in overlayfs
Since last cycle we support specifying overlayfs layers via file
descriptors. However, we don't allow detached mounts which means
userspace cannot user file descriptors received via
open_tree(OPEN_TREE_CLONE) and fsmount() directly. They have to
attach them to a mount namespace via move_mount() first.
This is cumbersome and means they have to undo mounts via umount().
Allow them to directly use detached mounts.
- Allow to retrieve idmappings with statmount
Currently it isn't possible to figure out what idmapping has been
attached to an idmapped mount. Add an extension to statmount() which
allows to read the idmapping from the mount.
- Allow creating idmapped mounts from mounts that are already idmapped
So far it isn't possible to allow the creation of idmapped mounts
from already idmapped mounts as this has significant lifetime
implications. Make the creation of idmapped mounts atomic by allow to
pass struct mount_attr together with the open_tree_attr() system call
allowing to solve these issues without complicating VFS lookup in any
way.
The system call has in general the benefit that creating a detached
mount and applying mount attributes to it becomes an atomic operation
for userspace.
- Add a way to query statmount() for supported options
Allow userspace to query which mount information can be retrieved
through statmount().
- Allow superblock owners to force unmount
* tag 'vfs-6.15-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (21 commits)
umount: Allow superblock owners to force umount
selftests: add tests for mount notification
selinux: add FILE__WATCH_MOUNTNS
samples/vfs: fix printf format string for size_t
fs: allow changing idmappings
fs: add kflags member to struct mount_kattr
fs: add open_tree_attr()
fs: add copy_mount_setattr() helper
fs: add vfs_open_tree() helper
statmount: add a new supported_mask field
samples/vfs: add STATMOUNT_MNT_{G,U}IDMAP
selftests: add tests for using detached mount with overlayfs
samples/vfs: check whether flag was raised
statmount: allow to retrieve idmappings
uidgid: add map_id_range_up()
fs: allow detached mounts in clone_private_mount()
selftests/overlayfs: test specifying layers as O_PATH file descriptors
fs: support O_PATH fds with FSCONFIG_SET_FD
vfs: add notifications for mount attach and detach
fanotify: notify on mount attach and detach
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs eventpoll updates from Christian Brauner:
"This contains a few preparatory changes to eventpoll to allow io_uring
to support epoll"
* tag 'vfs-6.15-rc1.eventpoll' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
eventpoll: add epoll_sendevents() helper
eventpoll: abstract out ep_try_send_events() helper
eventpoll: abstract out parameter sanity checking
|
|
Some field descriptions were missing, some were not very accurate.
Not touching the uAPI header or .c files for now.
Formatting of those comments isn't great in general, but at least
they are not missing anything now.
Before:
$ ./scripts/kernel-doc -none -Wall net/openvswitch/*.h 2>&1 | wc -l
16
After:
$ ./scripts/kernel-doc -none -Wall net/openvswitch/*.h 2>&1 | wc -l
0
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250320224431.252489-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix copy-paste error in the code comment for Interface Mode definitions.
The code refers to Internal TX delay, not Internal RX delay. It was likely
copied from the line above this one.
Signed-off-by: Ihor Matushchak <ihor.matushchak@foobox.net>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250316071551.9794-1-ihor.matushchak@foobox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Add CONFIG_DEBUG_VFS infrastucture:
- Catch invalid modes in open
- Use the new debug macros in inode_set_cached_link()
- Use debug-only asserts around fd allocation and install
- Place f_ref to 3rd cache line in struct file to resolve false
sharing
Cleanups:
- Start using anon_inode_getfile_fmode() helper in various places
- Don't take f_lock during SEEK_CUR if exclusion is guaranteed by
f_pos_lock
- Add unlikely() to kcmp()
- Remove legacy ->remount_fs method from ecryptfs after port to the
new mount api
- Remove invalidate_inodes() in favour of evict_inodes()
- Simplify ep_busy_loopER by removing unused argument
- Avoid mmap sem relocks when coredumping with many missing pages
- Inline getname()
- Inline new_inode_pseudo() and de-staticize alloc_inode()
- Dodge an atomic in putname if ref == 1
- Consistently deref the files table with rcu_dereference_raw()
- Dedup handling of struct filename init and refcounts bumps
- Use wq_has_sleeper() in end_dir_add()
- Drop the lock trip around I_NEW wake up in evict()
- Load the ->i_sb pointer once in inode_sb_list_{add,del}
- Predict not reaching the limit in alloc_empty_file()
- Tidy up do_sys_openat2() with likely/unlikely
- Call inode_sb_list_add() outside of inode hash lock
- Sort out fd allocation vs dup2 race commentary
- Turn page_offset() into a wrapper around folio_pos()
- Remove locking in exportfs around ->get_parent() call
- try_lookup_one_len() does not need any locks in autofs
- Fix return type of several functions from long to int in open
- Fix return type of several functions from long to int in ioctls
Fixes:
- Fix watch queue accounting mismatch"
* tag 'vfs-6.15-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
fs: sort out fd allocation vs dup2 race commentary, take 2
fs: call inode_sb_list_add() outside of inode hash lock
fs: tidy up do_sys_openat2() with likely/unlikely
fs: predict not reaching the limit in alloc_empty_file()
fs: load the ->i_sb pointer once in inode_sb_list_{add,del}
fs: drop the lock trip around I_NEW wake up in evict()
fs: use wq_has_sleeper() in end_dir_add()
VFS/autofs: try_lookup_one_len() does not need any locks
fs: dedup handling of struct filename init and refcounts bumps
fs: consistently deref the files table with rcu_dereference_raw()
exportfs: remove locking around ->get_parent() call.
fs: use debug-only asserts around fd allocation and install
fs: dodge an atomic in putname if ref == 1
vfs: Remove invalidate_inodes()
ecryptfs: remove NULL remount_fs from super_operations
watch_queue: fix pipe accounting mismatch
fs: place f_ref to 3rd cache line in struct file to resolve false sharing
epoll: simplify ep_busy_loop by removing always 0 argument
fs: Turn page_offset() into a wrapper around folio_pos()
kcmp: improve performance adding an unlikely hint to task comparisons
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount API updates from Christian Brauner:
"This converts the remaining pseudo filesystems to the new mount api.
The sysv conversion is a bit gratuitous because we remove sysv in
another pull request. But if we have to revert the removal we at least
will have it converted to the new mount api already"
* tag 'vfs-6.15-rc1.mount.api' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
sysv: convert sysv to use the new mount api
vfs: remove some unused old mount api code
devtmpfs: replace ->mount with ->get_tree in public instance
vfs: Convert devpts to use the new mount API
pstore: convert to the new mount API
|
|
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ASUS VivoBook X515UA with PCI SSID 1043:106f had a default quirk
pickup via pin table that applies ALC256_FIXUP_ASUS_MIC, but this adds
a bogus built-in mic pin 0x13 enabled. This was no big problem
because the pin 0x13 was assigned as the secondary mic, but the recent
fix made the entries sorted, hence this bogus pin appeared now as the
primary input and it broke.
For fixing the bug, put the right quirk entry for this device pointing
to ALC256_FIXUP_ASUS_MIC_NO_PRESENCE.
Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219897
Link: https://patch.msgid.link/20250324153233.21195-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge two commits removing unused helper functions related to power
management (David Alan Gilbert).
* pm-misc:
PM: clk: Remove unused pm_clk_remove()
PM: clk: remove unused of_pm_clk_add_clk()
|
|
After I dropped CONFIG_GENERIC_IOMAP, some PCI drivers started failing
to link when CONFIG_MMU is disabled:
ERROR: modpost: "pci_iounmap" [drivers/video/fbdev/i740fb.ko] undefined!
ERROR: modpost: "pci_iounmap" [drivers/video/fbdev/vt8623fb.ko] undefined!
ERROR: modpost: "pci_iomap_wc" [drivers/video/fbdev/vt8623fb.ko] undefined!
ERROR: modpost: "pci_iomap" [drivers/video/fbdev/vt8623fb.ko] undefined!
ERROR: modpost: "pci_iounmap" [drivers/video/fbdev/s3fb.ko] undefined!
...
It turns out that there were two mistakes in my patch: on !MMU I forgot
to enable CONFIG_GENERIC_PCI_IOMAP, and for Coldfire with MMU enabled,
teh GENERIC_IOMAP was left in place but incorrectly configured.
Fixes: 9d48cc07d0d7 ("m68k/nommu: stop using GENERIC_IOMAP")
Reported-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.15
This is a very big release due to a combination of some big new work,
mainly new drivers and generic SoundWire support, and some wide ranging
cleanup work that made small changes to a lot of drivers.
- Morimoto-san has completed the conversion to use modern terminology
for the clocking configuration, and several other cleanups with
narrower impact.
- All the power management operation configuration was updated to use
current idioms by Takashi Iwai.
- Clarification of the control operations from Charles Keepax.
- Prepartory work for more generic SoundWire SCDA controls from Charles
Keepax.
- Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95, nVidia
Tegra interconnects, Rockchip RK3588 S/PDIF, Texas Instruments
SN012776 and TAS5770L, and Wolfson WM8904 DMICs,
Some changes from the tip tree adding APIs needed by the AMD code are
included, these were unfortunately rebased in the tip tree after being
pulled in. There's also some regmap changes supporting the SCDA work
and some devres refactoring that was pulled in to support other changes.
|
|
Get ready for 6.15 merge window
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge updates related to system sleep for 6.15-rc1 including fixes,
cleanups and a rework of the "smart suspend" driver flag handling to
avoid issues that may occur when drivers using it depend on some other
drivers:
- Rework the handling of the "smart suspend" driver flag in the PM core
to avoid issues hat may occur when drivers using it depend on some
other drivers and clean up the related PM core code (Rafael Wysocki,
Colin Ian King).
- Fix the handling of devices with the power.direct_complete flag set
if device_suspend() returns an error for at least one device to avoid
situations in which some of them may not be resumed (Rafael Wysocki).
- Use mutex_trylock() in hibernate_compressor_param_set() to avoid a
possible deadlock that may occur if the "compressor" hibernation
module parameter is accessed during the registration of a new
ieee80211 device (Lizhi Xu).
- Suppress sleeping parent warning in device_pm_add() in the case when
new children are added under a device with the power.direct_complete
set after it has been processed by device_resume() (Xu Yang).
- Remove needless return in three void functions related to system
wakeup (Zijun Hu).
- Replace deprecated kmap_atomic() with kmap_local_page() in the
hibernation core code (David Reaver).
- Remove unused helper functions related to system sleep (David Alan
Gilbert).
- Clean up s2idle_enter() so it does not lock and unlock CPU offline
in vain and update comments in it (Ulf Hansson).
- Clean up broken white space in dpm_wait_for_children() (Geert
Uytterhoeven).
* pm-sleep:
PM: sleep: Fix bit masking operation
PM: sleep: Fix handling devices with direct_complete set on errors
PM: sleep: core: Fix indentation in dpm_wait_for_children()
PM: s2idle: Extend comment in s2idle_enter()
PM: s2idle: Drop redundant locks when entering s2idle
PM: sleep: Remove unused pm_generic_ wrappers
PM: sleep: Rearrange dpm_async_fn() and async state clearing
PM: sleep: Rename power.async_in_progress to power.work_in_progress
PM: core: Tweak pm_runtime_block_if_disabled() return value
PM: runtime: Convert pm_runtime_blocked() to static inline
PM: sleep: Update power.smart_suspend under PM spinlock
PM: sleep: Adjust check before setting power.must_resume
PM: wakeup: Remove needless return in three void APIs
PM: sleep: Suppress sleeping parent warning in special case
PM: hibernate: Avoid deadlock in hibernate_compressor_param_set()
PM: sleep: Avoid unnecessary checks in device_prepare_smart_suspend()
PM: sleep: Use DPM_FLAG_SMART_SUSPEND conditionally
PM: runtime: Introduce pm_runtime_blocked()
PM: Block enabling of runtime PM during system suspend
PM: hibernate: Replace deprecated kmap_atomic() with kmap_local_page()
|
|
Merge Energy Model handling code updates and updates of the runtime PM
core code for 6.15-rc1:
- Clean up the Energy Model handling code somewhat (Rafael Wysocki).
- Use kfree_rcu() to simplify the handling of runtime Energy Model
updates (Li RongQing).
- Add an entry for the Energy Model framework to MAINTAINERS as
properly maintained (Lukasz Luba).
- Address RCU-related sparse warnings in the Energy Model code (Rafael
Wysocki).
- Remove ENERGY_MODEL dependency on SMP and allow it to be selected
when DEVFREQ is set without CPUFREQ so it can be used on a wider
range of systems (Jeson Gao).
- Unify error handling during runtime suspend and runtime resume in the
core to help drivers to implement more consistent runtime PM error
handling (Rafael Wysocki).
- Drop a redundant check from pm_runtime_force_resume() and rearrange
documentation related to __pm_runtime_disable() (Rafael Wysocki).
* pm-em:
PM: EM: Rework the depends on for CONFIG_ENERGY_MODEL
PM: EM: Address RCU-related sparse warnings
PM: EM: Consify two parameters of em_dev_register_perf_domain()
MAINTAINERS: Add Energy Model framework as properly maintained
PM: EM: use kfree_rcu() to simplify the code
PM: EM: Slightly reduce em_check_capacity_update() overhead
PM: EM: Drop unused parameter from em_adjust_new_capacity()
* pm-runtime:
PM: runtime: Unify error handling during suspend and resume
PM: runtime: Drop status check from pm_runtime_force_resume()
PM: Rearrange documentation related to __pm_runtime_disable()
|
|
|
|
Commit c78dd25138d1 ("platform/x86: x86-android-tablets: Add Vexia EDU
ATLA 10 EC battery driver"), adds power_supply class registering to
the x86-android-tablets code.
Add "select POWER_SUPPLY" to the Kconfig entry to avoid these errors:
ERROR: modpost: "power_supply_get_drvdata" [drivers/platform/x86/x86-android-tablets/vexia_atla10_ec.ko] undefined!
ERROR: modpost: "power_supply_changed" [drivers/platform/x86/x86-android-tablets/vexia_atla10_ec.ko] undefined!
ERROR: modpost: "devm_power_supply_register" [drivers/platform/x86/x86-android-tablets/vexia_atla10_ec.ko] undefined!
When POWER_SUPPLY support is not enabled.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503231159.ga9eWMVO-lkp@intel.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250324125052.374369-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
bch2_dev_usage_read() is fairly expensive, we should optimize this more.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It turned out a user was wondering why we were going read-only after a
write error, and he didn't realize he didn't have replication enabled -
this will make that more obvious, and we should be printing it anyways.
Link: https://www.reddit.com/r/bcachefs/comments/1jf9akl/large_data_transfers_switched_bcachefs_to_readonly/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
00636 Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b0
00636 Mem abort info:
00636 ESR = 0x0000000096000005
00636 EC = 0x25: DABT (current EL), IL = 32 bits
00636 SET = 0, FnV = 0
00636 EA = 0, S1PTW = 0
00636 FSC = 0x05: level 1 translation fault
00636 Data abort info:
00636 ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
00636 CM = 0, WnR = 0, TnD = 0, TagAccess = 0
00636 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
00636 user pgtable: 4k pages, 39-bit VAs, pgdp=0000000101b10000
00636 [00000000000000b0] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
00636 Internal error: Oops: 0000000096000005 [#1] SMP
00636 Modules linked in:
00636 CPU: 12 UID: 0 PID: 79369 Comm: cat Not tainted 6.14.0-rc6-ktest-g3783b8973ab7 #17757
00636 Hardware name: linux,dummy-virt (DT)
00636 pstate: 20001005 (nzCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
00636 pc : print_chain+0xb8/0x170
00636 lr : print_chain+0xa0/0x170
00636 sp : ffffff80d9c1bbb0
00636 x29: ffffff80d9c1bbb0 x28: 0000000000000002 x27: ffffff80c1be8250
00636 x26: ffffff80dd9b0000 x25: 0000000000000020 x24: 000000000000002d
00636 x23: 000000000000003c x22: ffffffc080a54518 x21: ffffff80da6e00d0
00636 x20: ffffff80da6e0170 x19: ffffff80c1a1d240 x18: 00000000ffffffff
00636 x17: 3535303937202d3c x16: 203139202d3c2035 x15: 00000000ffffffff
00636 x14: 0000000000000000 x13: ffffff80d71b63f1 x12: 0000000000000006
00636 x11: ffffffc080beb1c0 x10: 0000000000000020 x9 : 00000000000134cc
00636 x8 : 0000000000000020 x7 : 0000000000000004 x6 : 0000000000000020
00636 x5 : ffffff80d71b63f7 x4 : ffffffc080a5451b x3 : 0000000000000000
00636 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
00636 Call trace:
00636 print_chain+0xb8/0x170 (P)
00636 bch2_check_for_deadlock+0x444/0x5a0
00636 bch2_btree_deadlock_read+0xb4/0x1c8
00636 full_proxy_read+0x74/0xd8
00636 vfs_read+0x90/0x300
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In debug mode, we save the call stack on transaction restart - but
there's no locking, so we can't touch it if we're issuing the restart
from another thread.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're hitting some issues with uninitialized struct padding, flagged by
kmsan.
They appear to be falso positives, otherwise bch2_accounting_validate()
would have flagged them as "junk at end". But for now, we'll need to
initialize disk_accounting_pos with memset().
This adds a new helper, bch2_disk_accounting_mod2(), that initializes a
disk_accounting_pos and does the accounting mod all at once - so overall
things actually get slightly more ergonomic.
BCH_DISK_ACCOUNTING_replicas keys are left for now; KMSAN isn't warning
about them and they're a bit special.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
fix a kmsan splat
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We appear to be tripping over a compiler/kmsan bug with padding fields -
this is an easy workaround.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We may sometimes read from uninitialized memory; we know, and that's ok.
We check if a btree node has been reused before waiting on any
outstanding IO.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Catching these early makes them a lot easier to track down.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We store to all fields, so the kmsan warnings were spurious - but
initializing via stores to bitfields appear to have been giving the
compiler/kmsan trouble, and they're not necessary.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
kmsan doesn't know about inline assembly, obviously; this will close a
ton of syzbot bugs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
New data types might be added later, so we don't want to disallow
unknown data types - that'll be a compatibility hassle later. Instead,
ignore them.
Reported-by: syzbot+3a290f5ff67ca3023834@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
These are counted as stripe data in the corresponding alloc keys.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More on the "full online self healing" project:
We now run most of the dirent <-> inode consistency checks, with repair
code, at runtime - the exact same check and repair code that fsck runs.
This will allow us to repair the "dirent points to inode that does not
point back" inconsistencies that have been popping up at runtime.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prep work for calling bch2_check_dirent_target() from bch2_lookup().
- Add an inline wrapper, if the target and backpointer match we can skip
the function call.
- We don't (yet?) want to remove the dirent we did the lookup from (when
we find a directory or subvol with multiple valid dirents pointing to
it), we can defer on that until later. For now, add an "are we in
fsck?" parameter.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're gradually running more and more fsck.c checks at runtime,
whereever applicable; when we do so they get moved out of fsck.c.
Next patch will call bch2_check_dirent_target() from bch2_lookup().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
name <-> inode, code for managing the relationships between inodes and
dirents.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Replace these with proper private error codes, so that when we get an
error message we're not sifting through the entire codebase to see where
it came from.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prep work for killing off EIO and replacing them with proper private
error codes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
There's no reason for the caller to do the actual logging, it's all done
the same.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
