summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-26ARM: dts: imx51-zii-rdu1: Add the unit addresses in sysledFabio Estevam
As described at Documentation/devicetree/bindings/mfd/mc13xxx.txt the reg property is mandatory, so add the corresponding unit address in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx51-zii-rdu1.dtb: Warning (unit_address_vs_reg): Node /soc/aips@70000000/spba@70000000/ecspi@70010000/pmic@0/leds/sysled0 has a reg or ranges property, but no unit name arch/arm/boot/dts/imx51-zii-rdu1.dtb: Warning (unit_address_vs_reg): Node /soc/aips@70000000/spba@70000000/ecspi@70010000/pmic@0/leds/sysled1 has a reg or ranges property, but no unit name Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx51-ts4800: Fix syscon and touschscreen nodesFabio Estevam
The syscon node has an incorrect notation for its unit address and the wdt node has an unneeded unit address. Fix them so that the following build warnings with W=1 are gone: arch/arm/boot/dts/imx51-ts4800.dtb: Warning (unit_address_vs_reg): Node /soc/aips@80000000/weim@83fda000/fpga@0/syscon@b0010000/wdt@e has a unit name, but no reg property arch/arm/boot/dts/imx51-ts4800.dtb: Warning (unit_address_vs_reg): Node /soc/aips@80000000/weim@83fda000/fpga@0/touchscreen has a reg or ranges property, but no unit name arch/arm/boot/dts/imx51-ts4800.dtb: Warning (simple_bus_reg): Node /soc/aips@80000000/weim@83fda000/fpga@0/syscon@b0010000 simple-bus unit address format error, expected "10000" arch/arm/boot/dts/imx51-ts4800.dtb: Warning (simple_bus_reg): Node /soc/aips@80000000/weim@83fda000/fpga@0/touchscreen simple-bus unit address format error, expected "12000" Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6q: Add Variscite DART-MX6 Carrier-board supportNeil Armstrong
This patch adds support for the i.MX6 Quad variant of the Variscite DART-MX6 SoM Carrier-Board. This Carrier-Board has the following : - LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch display - HDMI Connector - USB Host + USB OTG Connector - 10/100/1000 Mbps Ethernet - miniPCI-Express slot - SD Card connector - Audio Headphone/Line In jack connectors - On-board DMIC - CAN bus header - SPI header - Camera Interfaces header - 4xButtons, 2xLeds - OnBoard RTC with Coin Backup battery socket - RS232 Header + USB-Serial debug port Product Page : http://www.variscite.com/products/evaluation-kits/dart-mx6-kits The board support is done with all on-board and header interfaces enabled. 7" LVDS Touchscreen is enabled by default along HDMI output. Audio interface is supported with the "simple-card" bindings. PCIe slot, On-Board DMIC and Camera Interfaces are not handled yet. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl: Add Variscite DART-MX6 SoM supportNeil Armstrong
This patch adds support for the Variscite DART-MX6 SoM with : - i.MX6 Quad or Dual Lite SoC - 1Gb/2Gb LPDDR2 - 4-64 GB eMMC - Camera Interface - HDMI+CEC interface - LVDS / DSI / Parallel RGB interfaces - Ethernet RGMII interface - On-SoM Wi-Fi/Bluetooth with WiLink wl1835 SDIO Module - SD/MMC/SDIO interface - USB Host + USB OTG interface - I2C interfaces - SPI interfaces - PCI-Express 2.0 interface - on-SoM Audio Codec with HP/Line-In interfaces + DMIC interface - Digital Audio interface - S/PDIF interface Product website : http://www.variscite.com/products/system-on-module-som/cortex-a9/dart-mx6-cpu-freescale-imx6 Support is handled with a SoM-centric dtsi exporting the default interfaces along the default pinmuxing to be enabled by the board dts file. Only board-independent devices like WiFi, eMMC or PMIC are enabled in the dtsi. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26dt-bindings: display: Add bindings for SGD GKTW70SDAE4SE PanelNeil Armstrong
The GKTW70SDAE4SE is an LVDS display panel. Their bindings are modelled on the the LVDS panel bindings. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26dt-bindings: Add vendor prefix for Solomon Goldentek Display CorporationNeil Armstrong
Solomon Goldentek Display Corporation is a Taiwanese LCD/LCM manufacturer. Company Site: http://www.goldentek.com.tw Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-pinfunc: Add missing MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUTNeil Armstrong
Add missing pinmux entry for OSC32K_32K_OUT on pad ENET_RXD0 used by the Variscite DART-MX6 SoM. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: ls1021aqds: Add nand node for ifc controllerPrabhakar Kushwaha
LS1021AQDS support NAND flash on IFC chip-select 2. So add NAND node in device tree for IFC controller. Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx7d-pico-pi: Separate into cpu and baseboard dtsVanessa Maegima
Separate the old imx7d-pico into cpu (imx7d-pico.dtsi) and baseboard (imx7d-pico-pi.dts) dts so the same cpu dtsi can be used in different baseboards variants. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: vf500: Fix interrupt-controller unit addressFabio Estevam
The correct unit address for interrupt-controller is 0x40003000, so change it accordingly in order to fix the following build warning with W=1: arch/arm/boot/dts/vf500-colibri-eval-v3.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@40000000/interrupt-controller@40002000 simple-bus unit address format error, expected "40003000" Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6sx: Fix spba-bus unit addressFabio Estevam
The correct unit address for spba-bus is 0x2240000, so change it accordingly in order to fix the following build warning with W=1: arch/arm/boot/dts/imx6sx-sabreauto.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2200000/spba-bus@2200000 simple-bus unit address format error, expected "2240000" Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: vfxxx: Move nodes which have no reg property out of busFabio Estevam
Move iio-hwmon node from soc node to root node. iio-hwmon node does not have any register properties and thus shouldn't be placed on the bus. This fixes the following build warnings with W=1: arch/arm/boot/dts/vf500-colibri-eval-v3.dtb: Warning (simple_bus_reg): Node /soc/iio-hwmon missing or empty reg/ranges property Based on a patch from Simon Horman for the renesas r8a7795 dtsi. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx7s: Add unit address and reg for the anatop nodesFabio Estevam
Add unit address and reg for the anatop nodes in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@30000000/anatop@30360000/regulator-vdd1p0d missing or empty reg/ranges property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx7d: Fix pcie node warningsFabio Estevam
Fix the unit address notation and pass bus-range property in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (pci_bridge): Node /soc/aips-bus@30800000/pcie@0x33800000 missing bus-range for PCI bridge arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@30800000/pcie@0x33800000 simple-bus unit address format error, expected "33800000" Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx7: Move nodes which have no reg property out of busFabio Estevam
Move usbphynop1, usbphynop2, usbhypnop3, replicator and timer and nodes from soc node to root node. The nodes that have been moved do not have any register properties and thus shouldn't be placed on the bus. This fixes the following build warnings with W=1: arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/replicator missing or empty reg/ranges property arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@30800000/usbphynop1 missing or empty reg/ranges property arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@30800000/usbphynop3 missing or empty reg/ranges property arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@30800000/usbphynop2 missing or empty reg/ranges property Based on a patch from Simon Horman for r8a7795.dtsi. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6dl: Remove unneeded label and unit addressFabio Estevam
Remove unneeded label and unit address in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux@34 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux@34 has a unit name, but no Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6dl: Pass the reg properties for mipi nodesFabio Estevam
Pass the reg properties for mipi nodes in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@1/endpoint@0 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@1/endpoint@1 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@2/endpoint@0 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@2/endpoint@1 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@3/endpoint@0 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@3/endpoint@1 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@4/endpoint@0 has a unit name, but no reg property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (unit_address_vs_reg): Node /soc/aips-bus@2100000/mipi@21dc000/port@4/endpoint@1 has a unit name, but no reg property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6: Add unit address and reg for the anatop nodesFabio Estevam
Add unit address and reg for the anatop nodes in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-1p1 missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-3p0 missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-2p5 missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-vddcore missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-vddpu missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/anatop@20c8000/regulator-vddsoc missing or empty reg/ranges property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6: Move nodes which have no reg property out of busFabio Estevam
Move tempmon, ldb and pmu nodes from soc node to root node. The nodes that have been moved do not have any register properties and thus shouldn't be placed on the bus. This fixes the following build warnings with W=1: arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/tempmon missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/aips-bus@2000000/ldb missing or empty reg/ranges property arch/arm/boot/dts/imx6dl-apf6dev.dtb: Warning (simple_bus_reg): Node /soc/pmu missing or empty reg/ranges property Based on a patch from Simon Horman for r8a7795.dtsi. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx53: Move nodes which have no reg property out of busFabio Estevam
Move pmu, usbphy0 and usbphy1 nodes from soc node to root node. The nodes that have been moved do not have any register properties and thus shouldn't be placed on the bus. This fixes the following build warnings with W=1: arch/arm/boot/dts/imx53-ard.dtb: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name arch/arm/boot/dts/imx53-ard.dtb: Warning (simple_bus_reg): Node /soc/aips@50000000/usbphy-0 missing or empty reg/ranges property arch/arm/boot/dts/imx53-ard.dtb: Warning (simple_bus_reg): Node /soc/aips@50000000/usbphy-1 missing or empty reg/ranges property arch/arm/boot/dts/imx53-ard.dtb: Warning (simple_bus_reg): Node /soc/pmu missing or empty reg/ranges property Based on a patch from Simon Horman for r8a7795.dtsi. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6: add snvs-lpgpr nodeOleksij Rempel
This node is for Low Power General Purpose Register which can be used as Non-Volatile Storage. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: ls1021a: fix the value of TMR_FIPER1Yangbo Lu
The timer fixed interval period pulse generator register is used to generate periodic pulses. The down count register loads the value programmed in the fixed period interval (FIPER). At every tick of the timer accumulator overflow, the counter decrements by the value of TMR_CTRL[TCLK_PERIOD]. It generates a pulse when the down counter value reaches zero. It reloads the down counter in the cycle following a pulse. To use the TMR_FIPER1 register to generate a 1 PPS event, the value (10^9 nanoseconds) - TCLK_PERIOD should be programmed. It should be 999999995 not 999999990 since TCLK_PERIOD is 5. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-nitrogen6x: Add SPI NOR partitionsOtavio Salvador
This adds the partitions definition for the SPI NOR to provide backward compatibility with the documented[1] layout used with Boundary Devices BSP. 1. https://boundarydevices.com/boot-flash-access-linux/ It exports to Linux: mtd0: bootloader mtd1: env mtd2: splash Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-cubox-i: update GPIO specificationRussell King
Fabio Estevam suggested using GPIO_ACTIVE_HIGH in the gpio specification for the USB regulators. Change them to conform. Suggested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl: SolidRun: add v1.5 som with eMMCRussell King
Add Cubox-i and Hummingboard variants for v1.5 SOMs, where the SOM has eMMC fitted. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl: SolidRun: add v1.5 som without eMMCRussell King
Add Cubox-i and Hummingboard variants for v1.5 SOMs, which have TI Wi-Fi instead of Broadcom Wi-Fi. This variant does not include SOM eMMC support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl: SolidRun: fix node namesRussell King
Node names are supposed to be generic, fix the RTC and codec node names for both Hummingboard and Cubox-i. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl: SolidRun: rename regulators to match schematicRussell King
Make the regulators match the schematic - name the regulators after one of their schematic supply names, and arrange them into their heirarchy. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-hummingboard: add SD card regulatorRussell King
Add the SD card regulator, which allows the SD card power to be switched on/off. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-sr-som: add support for eMMCRussell King
Rev 1.5 microsoms include eMMC support on-board. Add a microsom include file which can be used to add support for this. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-sr-som: add support for TI Wi-FiRussell King
Add support for the TI Wi-Fi WL1837 device on SolidRun's revision 1.5 microsoms. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-sr-som: add 3.3V vcc regulatorRussell King
Add a 3.3V regulator for devices connected to the vcc_3v3 supply signal on the microsom. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-sr-som-brcm: rename sdio clockRussell King
The SDIO clock is really the Broadcom clock. Rename it as such. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-sr-som: split out Broadcom Wi-Fi supportRussell King
There are two variants of the imx6qdl som: one with Broadcom Wi-Fi and another with Texas Instruments Wi-Fi. The two Wi-Fi devices require different DT bindings, so it's necessary to split out the Broadcom specifics. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-sr-som: use real iomuxc values for ethernetRussell King
Use real iomuxc values rather than preserving the boot loader value for the SOMs ethernet. Suggested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl: SolidRun: move microsom includes into .dtsRussell King
Move the microsom includes into the .dts files so different options can be accomodated at the lowest level. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-microsom: rename to imx6qdl-sr-somRussell King
Jon and myself feel that "imx6qdl-microsom" is too generic a name for SolidRun's microsom - some other manufacturer could have their own microsom. Change the name to the shorter "imx6qdl-sr-som". Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl: SolidRun: move AR8035 into microsomRussell King
As all SolidRun microsoms are fitted with an AR8035, it's pointless having the ethernet support as a separate include file. Move the AR8035 support into the main imx6qdl-microsom file. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl: SolidRun: remove redundant regulators nodeRussell King
The regulators node is redundant, and serves no useful function. Remove it from i.MX6 SolidRun platforms. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-udoo: add support for powering offMaciej S. Szmigiero
UDOO board has a possibility to disable most of imx6 SoC power supplies via "EN_5V" signal, which is connected to "NANDF_D4" pad. This reduces current consumption after shutdown from ~350 mA to ~40 mA and prevents a SoC watchdog from starting it again on its own after the watchdog timeout expires (previously it was not possible to shut down the SoC permanently if its watchdog was ever enabled since it was still ticking after the shutdown). Unfortunately, this does not extinguish the "Power" LED (as it is powered from an always-on voltage regulator). To power the SoC up again press the power button (SW2, the one with a long shaft). Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx53-cx9020: Fix the Ethernet PHY reset GPIO polarityFabio Estevam
As explained in Documentation/devicetree/bindings/net/fsl-fec.txt the phy-reset-gpios is active high only if the 'phy-reset-active-high' is present. As 'phy-reset-active-high' is not used here, fix the device tree description by passing GPIO_ACTIVE_LOW flag. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Patrick Bruenn <p.bruenn@beckhoff.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-sabreauto: Add CEC supportFabio Estevam
HDMI_TX_CEC_LINE pin is used for CEC, so pass it in the device tree. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-sabreauto: Pass the DDC I2C busFabio Estevam
On imx6qdl-sabreauto the HDMI DDC bus is connected to I2C2, so pass the 'ddc-i2c-bus' property accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6sx-sdb: Add PCIe supportFabio Estevam
Add support for PCIe support. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6sx-sdb: Rearrange the regulators nodeFabio Estevam
It is not recommended to place regulators inside "simple-bus", so move them out. The motivation for doing this is to make it easier to adding new regulators. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6sx: Fix the PCI representationFabio Estevam
Currently the imx pci driver fails to probe on i.MX6SX. Fix the PCI representation so that the driver can be probed and PCI devices can be detected. Tested on a im6sx-sdb board: 00:00.0 Class 0604: 16c3:abcd 01:00.0 Class 0280: 8086:08b1 Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-udoo: disable AC'97 input pins pad driversMaciej S. Szmigiero
AC'97 interface RXD and TXC pins are only used as SoC inputs, let's disable pad drivers for them so we will be protected if, for example, TCLKDIR is set by mistake in AUDMUX and causes TXC pin to be configured as an output. This also changes pull direction on these pins from pull-up to pull-down to match what the board AC'97 CODEC chip (VT1613) has on these pins. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: ls1021a: add "fsl,ls1021a-esdhc" compatible string to esdhc nodeRasmus Villemoes
Commit a22950c888e3 (mmc: sdhci-of-esdhc: add quirk SDHCI_QUIRK_BROKEN_TIMEOUT_VAL for ls1021a) added logic to the driver to enable the broken timeout val quirk for ls1021a, but did not add the corresponding compatible string to the device tree, so it didn't really have any effect. Fix that. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: ls1021a: Enable the esdhcyinbo.zhu
Ls1021a esdhc had been enabled in uboot, but it had not been enabled it in kernel, So set the esdhc's status to "okay". Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: vf610-zii-dev-c: Fix switch EEPROM sizeAndrew Lunn
The two Ethernet switches have an AT24C512 each. This is a 64K device, not 512 bytes as currently listed in the device tree. Reported-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Chris Healy <cphealy@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 10:45:48 +0000