summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-26ARM: dts: imx: Add missing #phy-cells to usb-nop-xceivRob Herring
"usb-nop-xceiv" is using the phy binding, but is missing #phy-cells property. This is probably because the binding was the precursor to the phy binding. Fixes the following warning in i.MX dts files: Warning (phys_property): Missing property '#phy-cells' in node ... Signed-off-by: Rob Herring <robh@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6: RDU2: add alias for RTCLucas Stach
This makes sure that the battery backed RTC is always the primary one, regardless of the driver probe ordering. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx: rdu1: cosmetic changes to the audio nodesLucas Stach
This renames the audio device to "Front" in order to match the RDU2 naming, which makes it easier for a unified userspace to deal with both boards. Also rename the phandle for the headphone amplifier to more closely resemble the RDU2 DTS. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6qdl-wandboard-revd1: Make EDID functionalFabio Estevam
There are 0 ohm resistors that allow selecting the EDID I2C port to be I2C1 or I2C2. On revd1 the 0 ohm resistors are populated in such a way that the I2C2 is used as DDC I2C bus, so fix it accordingly. Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx: name the interrupts for the fec ethernet driverTroy Kisky
imx7s/imx7d has the ptp interrupt newly added as well. For imx7, "int0" is the interrupt for queue 0 and ENET_MII "int1" is for queue 1 "int2" is for queue 2 For imx6sx, "int0" handles all 3 queues and ENET_MII And of course, the "pps" interrupt is for the PTP_CLOCK_PPS interrupts This will help document what each interrupt does. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx6: RDU2: add i210 nodeLucas Stach
This is needed for the bootloader to patch in the correct MAC address. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: imx53-tx53: Fix 'ethernet-phy@0' node with unit name and no reg ↵Marco Franchi
property The following build warning is seen with W=1: Warning (unit_address_vs_reg): Node /soc/aips@60000000/ethernet@63fec000/ethernet-phy@0 has a unit name, but no reg property Fix this warning by adding reg property from such node and, consequently, includes a mdio node into the fec node, with the 'address-cells' and 'size-cells' to avoid these other following warnings: Warning (reg_format): "reg" property in /soc/aips@60000000/ethernet@63fec000/ethernet-phy@0 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/aips@60000000/ethernet@63fec000/ethernet-phy@0 Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/aips@60000000/ethernet@63fec000/ethernet-phy@0 Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Tested-by: Lothar Waßmann <LW@karo-electronics.de> Acked-by: Lothar Waßmann <LW@karo-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26ARM: dts: ls1021a: Add support for QSPI with ls1021a SoCSZ Lin
Add QSPI node support, and this function is disabled by default This setting could be overwritten in board-level definitions Signed-off-by: SZ Lin <sz.lin@moxa.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-23Revert "ARM: dts: dra7: Add properties to enable PCIe x2 lane mode"Tony Lindgren
This reverts commit 4ece93c020e3ee19767b1c111be39fe7e32f8bf2. The device tree binding for these is still being discussed. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-22arm: dts: owl-s500: Add SparkyAndreas Färber
Add a Device Tree for the Allo.com Sparky SBC. Acked-by: Sudeep Kumar <sudeepkumar@cem-solutions.net> [AF: Adjusted SPDX-License-Identifier style] Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-12-22arm64: dts: actions: Add S700 and CubieBoard7Andreas Färber
Add Device Trees for S700 SoC and Cubietech CubieBoard7. Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-12-22arm64: dts: hisilicon: Add hi3660 cpu capacity-dmips-mhz informationValentin Schneider
The following dt entries are added: cpus [0-3] (Cortex A53): - capacity-dmips-mhz = <592>; cpus [4-7] (Cortex A73): - capacity-dmips-mhz = <1024>; Those values were obtained by running dhrystone 2.1 on a HiKey960 with the following procedure: - Offline all CPUs but CPU0 (A53) - Set CPU0 frequency to maximum - Run Dhrystone 2.1 for 20 seconds - Offline all CPUs but CPU4 (A73) - set CPU4 frequency to maximum - Run Dhrystone 2.1 for 20 seconds The results are as follows: A53: 129633887 loops A73: 287034147 loops By scaling those values so that the A73s use 1024, we end up with 462 for the A53s. However, they have different maximum frequencies: 1.844GHz for A53s and 2.362GHz for A73s. Thus, we can scale the A53 value to truly represent dmips per MHz, and we end up with 592. The impact of this change can be verified on HiKey960: $ cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_cur_freq 1844000 1844000 1844000 1844000 2362000 2362000 2362000 2362000 $ cat /sys/devices/system/cpu/cpu*/cpu_capacity 462 462 462 462 1024 1024 1024 1024 Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-12-22arm64: dts: hi3660: improve pmu descriptionXu YiPing
cortex-a73 pmu driver is supported now. hi3660 is 4*a73 + 4*a53, so it should use "cortex-a73-pmu" and "cortex-a53-pmu" instead of "armpmu-v3", then we can use the a73 and a53 events in perf tool directly. Signed-off-by: Xu YiPing <xuyiping@hisilicon.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-12-22ARM: dts: Add TVE/TVC and ILI9322 panel to DIR-685Linus Walleij
This adds the TVE200/TVC TV-encoder and the Ilitek ILI9322 panel to the DIR-685 device tree. This brings graphics to this funky router and it is possible to even run a console on its tiny screen. Incidentally this requires us to disable the access to the parallel (NOR) flash, as the communication pins to the panel are shared with the flash memory. To access the flash, a separate kernel with the panel disabled and the flash enabled should be booted. The pin control selecting whether to use the lines cannot be altered at runtime due to hardware constraints. Cc: David Lechner <david@lechnology.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-22ARM: dts: Add PCI to WBD111 and WBD222Linus Walleij
These two boards have mini-PCI card slots, so enable PCI on both of them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-22ARM: dts: Flags D-Link DIR-685 I2C bus gpiosLinus Walleij
These GPIOs are used in open drain mode, so make sure to flag them as such. Use the new separate scl/sda line GPIO bindings. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-22ARM: dts: r8a7745: Add missing clock for secondary CA7 CPU coreBiju Das
Add the missing clock to CA7 CPU1 node. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-21Merge tag 'v4.16-rockchip-dts64-1' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Pull "Rockchip dts64 changes for 4.16" from Heiko Stübner: General RK3399 gets Mipi nodes, fixes for usb3 support and better support for the type-c phys. The Kevin Chromebooks based on rk3399 now can use their internal edp displays. RK3328 gets its efuse node and Mali450 gpu node, which actually produces already some nice results with the WIP Lima driver. * tag 'v4.16-rockchip-dts64-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add efuse device node for RK3328 SoC arm64: dts: rockchip: add rk3328 mali gpu node dt-bindings: gpu: mali-utgard: add rockchip,rk3328-mali compatible arm64: dts: rockchip: add extcon nodes and enable tcphy rk3399-gru arm64: dts: rockchip: add usb3-phy otg-port support for rk3399 arm64: dts: rockchip: add reset property for dwc3 controllers on rk3399 arm64: dts: rockchip: add the aclk_usb3 clocks for USB3 on rk3399 arm64: dts: rockchip: add pd_usb3 power-domain node for rk3399 arm64: dts: rockchip: Enable edp disaplay on kevin arm64: dts: rockchip: update mipi cells for RK3399 arm64: dts: rockchip: add mipi_dsi1 support for rk3399 arm64: dts: rockchip: add rk3399 DSI0 reset
2017-12-21Merge tag 'v4.16-rockchip-dts32-1' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Pull "Rockchip dts32 changes for 4.16" from Heiko Stübner: Just the reset property for the rk3066a-rayeager emac phy * tag 'v4.16-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add reset property for rk3066a-rayeager emac phy
2017-12-21ARM: dts: msm8974-FP2: Add uSD slot nodesLuca Weiss
Add and enable the sdhci2 slot and the pinctrl configuration. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-12-21Merge tag 'v4.15-next-dts64' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt Pull "arm64: Updates of aarch64 DTS for v4.15-next" from Matthias Brugger - mt8173 add cpufreq related nodes supply nodes frequency/voltage operation table - mt2712 add cpufreq related nodes fixed regulator supply nodes frequency/voltage operation table - mt2712 add clock contoller nodes - mt2712 add scpsys node * tag 'v4.15-next-dts64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: Add power controller device node of MT2712 arm64: dts: mediatek: add mt2712 cpufreq related device nodes arm64: dts: mt2712: Add clock controller device nodes arm64: dts: mediatek: add mt8173 cpufreq related device nodes dt-bindings: soc: add MT2712 power dt-bindings
2017-12-21Merge tag 'v4.15-next-dts32' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt Pull "arm: Updates of armv7 DTS for v4.15-next" from Matthias Brugger: - add reset cells mt2701 and mt7623 ethsys - update mmc nodes for mt7623 - mt7623 change mmc card detection pin to active low - mt7623 set unit address to lower case * tag 'v4.15-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: dt-bindings: ARM: Mediatek: Fix ethsys documentation arm: mt7: dts: Remove leading 0x and 0s from bindings notation arm: dts: mt7623: fix card detection issue on bananapi-r2 arm: dts: mt7623: update mmc related nodes with the appropriate fallback arm: dts: mt2701: Add reset-cells arm: dts: mt7623: Update ethsys binding
2017-12-21Merge tag 'tegra-for-4.16-arm64-dt' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Pull "arm64: tegra: Changes for v4.16-rc1" from Thierry Reding: This set of patches enables a bunch of new features on Jetson TX2 that were finally unblocked by the GPIO driver getting merged for v4.15. * tag 'tegra-for-4.16-arm64-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Use sor1_out clock arm64: tegra: Fix SD write-protect polarity on Jetson TX2 arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms arm64: tegra: Enable HDMI on Jetson TX2 arm64: tegra: Mark I2C4 as DDC on P3310 arm64: tegra: Add display nodes on Tegra186 arm64: tegra: Add SMMU node for Tegra186 arm64: tegra: Enable memory controller on P3310 arm64: tegra: Add memory controller on Tegra186 arm64: tegra: Add FUSE block on Tegra186 arm64: tegra: Add MISC registers on Tegra186
2017-12-21Merge tag 'tegra-for-4.16-arm-dt' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Pull "ARM: tegra: Device tree changes for v4.16-rc1" from Thierry Reding: These changes enable the video decoder engine found on Tegra20 SoCs. * tag 'tegra-for-4.16-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Add video decoder on Tegra20 ARM: tegra: Add device tree node to describe IRAM on Tegra20
2017-12-21Merge tag 'tegra-for-4.16-dt-bindings' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Pull "dt-bindings: Updates for v4.16-rc1" from Thierry Reding: This contains a set of patches that extend existing bindings with support for Tegra186. * tag 'tegra-for-4.16-dt-bindings' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: memory: Add Tegra186 support dt-bindings: misc: Add Tegra186 MISC registers bindings
2017-12-21Merge tag 'samsung-dt64-4.16' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Pull "Samsung DTS ARM64 changes for v4.16" from Krzysztof Kozłowski: 1. Add CPU perf counters to Exynos5433. 2. Add missing power domains to Exynos5433. 3. Add NFC chip to Exynos5433 TM2/TM2E. 4. Fix obscure bugs on I2C transfers to MHL chip on TM2/TM2E. * tag 'samsung-dt64-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Increase bus frequency for MHL chip arm64: dts: exynos: Add remaining power domains to Exynos5433 SoC arm64: dts: exynos: Add AUD power domain to Exynos5433 SoC arm64: dts: exynos: Add MFC power domain to Exynos 5433 SoC arm64: dts: exynos: Add MSCL power domain to Exynos 5433 SoC arm64: dts: exynos: Add DISP power domain to Exynos 5433 SoC arm64: dts: exynos: Add GSCL power domain to Exynos 5433 SoC arm64: dts: exynos: Add support for S3FWRN5 NFC chip to TM2(e) boards arm64: dts: exynos: Add CPU performance counters to Exynos5433 boards
2017-12-21Merge tag 'samsung-dt-4.16' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Pull "Samsung DTS ARM changes for 4.16" from Krzysztof Kozłowski: 1. Add sound support to Odroid XU4 (and adjustments to Odroid XU3). 2. Enable WiFi on Trats2. 3. Add CPU perf counters to Exynos54xx. 4. Add power domains to certain chipsets. 5. Add Exynos4412 ISP clock controller which finally solves freezes when accessing ISP clocks while having the ISP power domain turned off. 6. Add Pseudo and True RNG to Exynos5. 7. Minor fixes for Trats2, Odroid XU3/XU4, Exynos5410. 8. Cleanup of some of DTC warnings * tag 'samsung-dt-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Use lower case hex addresses in node unit addresses ARM: dts: exynos: Add nodes for True Random Number Generator ARM: dts: exynos: Add DT nodes for PRNG in Exynos5 SoCs ARM: dts: exynos: Add G3D power domain to Exynos5250 ARM: dts: exynos: Add audio power domain to Exynos5250 ARM: dts: exynos: Fix power domain node names for Exynos5250 ARM: dts: exynos: Add missing interrupt-controller properties to Exynos5410 PMU ARM: dts: exynos: Add audio power domain support to Exynos542x SoCs ARM: dts: exynos: Fix property values of LDO15/17 for Odroid XU3/XU4 ARM: dts: exynos: Add Exynos4412 ISP clock controller ARM: dts: exynos: Move G2D node to exynos5.dtsi ARM: dts: exynos: Add CPU perf counters to Exynos54xx boards ARM: dts: exynos: Remove duplicate definitions of SSS nodes for Exynos5 ARM: dts: exynos: Add bcm4334 device node to Trats2 ARM: dts: exynos: Correct Trats2 panel reset line ARM: dts: exynos: Add sound support for Odroid XU4 ARM: dts: exynos: Switch to dedicated Odroid XU3 sound card binding
2017-12-21Merge tag 'gemni-dts-1' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt Gemini DTS updates, take one * tag 'gemni-dts-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: Add basic devicetree for D-Link DNS-313 ARM: dts: Add ethernet PHYs to the a bunch of Geminis
2017-12-21Merge tag 'omap-for-v4.16/dt-signed' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "Dts related changes for omaps for v4.16 merge window" from Tony Lindgren: These changes are mostly improvments for various devices. Note that these are based on my earlier fixes branch omap-for-v4.15/fixes-dt to avoid a pointless merge conflict between a fix and removal. The summary of changes is: - Fix audio codec reset pin for am335x-pepper and n900, this has been always broken and won't get fixed until the related driver changes are also merged in for v4.16, so not urgent - Fix tps65917 powerhold property for dra76-evm - Changes to logicpd boards to remove MTD partition information and to add support for omap35xx variants by setting up common dts files for the logicpd boards - Disable dra7 USB metastability workaround, this won't do anything until the related driver changes are also merged into v4.16, so not urgent * tag 'omap-for-v4.16/dt-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Move move WiFi bindings to logicpd-torpedo-37xx-devkit ARM: dts: Add minimal support for LogicPD OMAP35xx Torpedo devkit ARM: dts: Move most of logicpd-torpedo-37xx-devkit to logicpd-torpedo-baseboard ARM: dts: Add minimal support for LogicPD OMAP35xx SOM-LV devkit ARM: dts: Move most of logicpd-som-lv-37xx-devkit.dts to logicpd-som-lv-baseboard.dtsi ARM: dts: dra7: Add missing hdmi audio DMA channel information ARM: dts: dra7: Disable USB metastability workaround for USB2 ARM: dts: omap3: logicpd kits: Remove partition information ARM: dts: DRA76-EVM: Set powerhold property for tps65917 ARM: dts: omap3-n900: Fix the audio CODEC's reset pin ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin
2017-12-21Merge tag 'omap-for-v4.16/dt-clk-signed' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "Clock related dts changes for omaps for v4.16 merge window" from Tony Lindgren: This branch contains a series of dts changes from Tero Kristo to start using clkctrl clocks. Note that this branch is based on a merge of omap-for-v4.16/soc-signed and an immutable commit from Tero Kristo fe7020e64f04 ("clk: ti: omap4: clkctrl data fixes for opt-clocks") that is also in clk-next. * tag 'omap-for-v4.16/dt-clk-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (57 commits) ARM: dts: dm816x: add clkctrl nodes ARM: dts: dm814x: add clkctrl nodes ARM: dts: am43xx: add clkctrl nodes ARM: dts: am33xx: add clkctrl nodes ARM: dts: dra7: add clkctrl nodes ARM: dts: omap5: add clkctrl nodes ARM: dts: omap4: add clkctrl nodes ARM: dts: dm816x: add bus functionality to base PRCM node ARM: dts: am43xx: add bus functionality to base PRCM node ARM: dts: am33xx: add bus functionality to base PRCM node ARM: dts: dra7: add bus functionality to base PRCM nodes ARM: dts: omap4: add bus functionality to base PRCM nodes ARM: dts: omap5: add bus functionality to base PRCM nodes ARM: dts: dm816x: add fck under timers1/2 ARM: dts: dm814x: add fck under timers1/2 ARM: dts: dra7: add fck under timer1 ARM: dts: am43xx: add fck under timers1/2 ARM: dts: am33xx: add fck under timers1/2 ARM: dts: omap4: add fck under timer1 ARM: dts: omap5: add fck under timer1 ...
2017-12-21ARM: dts: am572x-idk: Add cpu0 vdd supplyDave Gerlach
Add vdd-supply as smps12_reg for cpu0. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: am571x-idk: Add cpu0 vdd supplyDave Gerlach
Add vdd-supply as smps12_reg for cpu0. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra72-evm-tps65917: Add cpu0 vdd supplyDave Gerlach
Add vdd-supply as smps12_reg for cpu0. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra7-evm: Add cpu0 vdd supplyDave Gerlach
Add vdd-supply as smps123_reg for cpu0. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: am57xx-beagle-x15-common: Add cpu0 vdd supplyDave Gerlach
Add vdd-supply as smps12_reg for cpu0. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra7: Enable 1.5 GHz operation for the CPUDave Gerlach
After ti-opp-supply driver is in place to provide AVS Class0 and abb regulator scaling support let's enable 1.5GHz for the cpu. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra7: Add MPU OPP supply nodeDave Gerlach
Add the OPP supply node for the MPU voltage rail to provide the information needed by the ti-opp-supply driver to enable AVS Class 0. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra7: Add vbb-supply to cpu and additional voltagesDave Gerlach
Add a vbb-supply phandle to the cpus node and also add an additional triplet of voltages for each OPP in the operating-points-v2 table to make use of the multi regulator support in the OPP core and provide the vbb regulator for use by the ti-opp-supply driver. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21Merge tag 'amlogic-dt64' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 64-bit DT updates for v4.16" from Kevin Hilman - meson-gx: add VPU power domain support - odroid-c2: add HDMI and CEC nodes - misc cleanups * tag 'amlogic-dt64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gxm: fix q200 interrupt number ARM64: dts: meson-gxm: add the PHY interrupt line on Khadas VIM2 ARM64: dts: meson: add comments with the GPIO for the PHY interrupts ARM64: dts: amlogic: use generic bus node names ARM64: dts: meson: drop "sana" clock from SAR ADC ARM64: dts: odroid-c2: Add HDMI and CEC Nodes ARM64: dts: meson-gx: grow reset controller memory zone ARM64: dts: meson-gx: Add HDMI_5V regulator on selected boards ARM64: dts: meson-gx: add VPU power domain
2017-12-21Merge tag 'amlogic-dt' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 32-bit DT changes for v4.16" from Kevin Hilman: - meson8: GPIO IRQ support - switch to stable UART bindings w/correct clock - add more L2 cache settings - drop unused ADC clock * tag 'amlogic-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: meson: enable MESON_IRQ_GPIO also for MACH_MESON8 ARM: dts: meson8: enable the GPIO interrupt controller ARM: dts: meson8b: use stable UART bindings with correct gate clock ARM: dts: meson8: use stable UART bindings with correct gate clock ARM: dts: meson: drop "sana" clock from SAR ADC ARM: dts: meson8: add more L2 cache settings ARM: dts: meson8b: add more L2 cache settings
2017-12-21ARM: dts: am335x-boneblue: enable canRobert Nelson
BeagleBone Blue: can: enable the dedicated can connector. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Cc: Jason Kridner <jkridner@beagleboard.org> Cc: Drew Fustini <drew@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: am335x-boneblue: enable usartsRobert Nelson
BeagleBone Blue: usarts: enable all the dedicated usart connectors. DSM2/uart4: on the Blue, this is a recieve only interface. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Cc: Jason Kridner <jkridner@beagleboard.org> Cc: Drew Fustini <drew@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: am335x-boneblue: fix wl1835 IRQ pinRobert Nelson
Use the correct IRQ gpio pin on the BeagleBone Blue to allow the wl1835 wireless module to actually work. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Cc: Jason Kridner <jkridner@beagleboard.org> Cc: Drew Fustini <drew@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra7: Remove deprecated PCI compatible stringKishon Vijay Abraham I
Since SoC specific compatible strings are used for PCIe in dra74x.dtsi and dra72x.dtsi, remove the compatible property from dra7.dtsi which uses the deprecated compatible string. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra76-evm: Enable x2 PCIe lanesKishon Vijay Abraham I
DRA76 EVM has a 4-lane PCIe connector and DRA76 can support x2 lanes. Enable both the PCIe lanes here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: DRA72x: Use PCIe compatible specific to dra72Kishon Vijay Abraham I
Use dra72 specific compatible string for PCIe while preserving the older compatible. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: DRA74x: Use PCIe compatible specific to dra74Kishon Vijay Abraham I
Use dra74 specific compatible string for PCIe while preserving the older compatible. While at that add a new label for the 2nd instance of pcie. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: dra7: Add properties to enable PCIe x2 lane modeKishon Vijay Abraham I
ti,syscon-lane-sel and ti,syscon-lane-conf properties specific to enable PCIe x2 lane mode are added here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: am57xx: Add support for am574x-idkLokesh Vutla
am574x-idk is similar to am572x-idk with am574x SoC. So create a common file for both evms and include SoC dtsi as needed. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-21ARM: dts: am43x-epos-evm: Hook dcdc2 as the cpu0-supplyDave Gerlach
Hook dcdc2 as the cpu0-supply. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit (git 2.34.1) at 2025-09-11 23:50:46 +0000