| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm alternatives updates from Borislav Petkov:
- Teach the static_call patching infrastructure to handle conditional
tall calls properly which can be static calls too
- Add proper struct alt_instr.flags which controls different aspects of
insn patching behavior
* tag 'x86_alternatives_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/static_call: Add support for Jcc tail-calls
x86/alternatives: Teach text_poke_bp() to patch Jcc.d32 instructions
x86/alternatives: Introduce int3_emulate_jcc()
x86/alternatives: Add alt_instr.flags
|
|
There is a spelling mistake in a pr_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20230220144422.873356-1-colin.i.king@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Sagar's email listed in maintainers is bouncing as his division was sold
off by the company. I attempted to contact him some days ago on what the
bounce email told me was his new contact information, but am yet to
receive a response.
Paul and Palmer are listed on each of the bindings, both of whom were
alive & well as of Wednesday so the bindings remain maintained.
CC: Sagar Kadam <sagar.kadam@openfive.com>
CC: Sagar Kadam <sagar.kadam@sifive.com>
Link: https://lore.kernel.org/all/785425ca-4000-a7e4-16d6-4d68c91b158d@kernel.org/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230217180035.39658-1-conor@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add compatible for sm8450 IMEM.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1676986616-21378-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Convert the Loongson1 interrupt controller dt-bindings to json-schema.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230221102545.2103632-1-keguang.zhang@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add a driver for the RAS functionality on Xilinx's on chip memory
controller
- Add support for decoding errors from the first and second level
memory on SKL-based hardware
- Add support for the memory controllers in Intel Granite Rapids and
Emerald Rapids machines
- First round of amd64_edac driver simplification and removal of
unneeded functionality
- The usual cleanups and fixes
* tag 'edac_updates_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Shut up an -Werror,-Wsometimes-uninitialized clang false positive
EDAC/amd64: Remove early_channel_count()
EDAC/amd64: Remove PCI Function 0
EDAC/amd64: Remove PCI Function 6
EDAC/amd64: Remove scrub rate control for Family 17h and later
EDAC/amd64: Don't set up EDAC PCI control on Family 17h+
EDAC/i10nm: Add driver decoder for Sapphire Rapids server
EDAC/i10nm: Add Intel Granite Rapids server support
EDAC/i10nm: Make more configurations CPU model specific
EDAC/i10nm: Add Intel Emerald Rapids server support
EDAC/skx_common: Delete duplicated and unreachable code
EDAC/skx_common: Enable EDAC support for the "near" memory
EDAC/qcom: Add platform_device_id table for module autoloading
EDAC/zynqmp: Add EDAC support for Xilinx ZynqMP OCM
dt-bindings: edac: Add bindings for Xilinx ZynqMP OCM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Add support for reporting more bits of the physical address on error,
on newer AMD CPUs
- Mask out bits which don't belong to the address of the error being
reported
* tag 'ras_core_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Mask out non-address bits from machine check bank
x86/mce: Add support for Extended Physical Address MCA changes
x86/mce: Define a function to extract ErrorAddr from MCA_ADDR
|
|
Resolve conflicts from the signature change in iommu_map:
- drivers/infiniband/hw/usnic/usnic_uiom.c
Switch iommu_map_atomic() to iommu_map(.., GFP_ATOMIC)
- drivers/vfio/vfio_iommu_type1.c
Following indenting change for GFP_KERNEL
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
|
|
Move drm_fb_helper_unprepare() from drm_fb_helper_fini() into the
calling fbdev implementation. Avoids a possible stale mutex with
generic fbdev code.
As indicated by its name, drm_fb_helper_prepare() prepares struct
drm_fb_helper before setting up the fbdev support with a call to
drm_fb_helper_init(). In legacy fbdev emulation, this happens next
to each other. If successful, drm_fb_helper_fini() later tear down
the fbdev device and also unprepare via drm_fb_helper_unprepare().
Generic fbdev emulation prepares struct drm_fb_helper immediately
after allocating the instance. It only calls drm_fb_helper_init()
as part of processing a hotplug event. If the hotplug-handling fails,
it runs drm_fb_helper_fini(). This unprepares the fb-helper instance
and the next hotplug event runs on stale data.
Solve this by moving drm_fb_helper_unprepare() from drm_fb_helper_fini()
into the fbdev implementations. Call it right before freeing the
fb-helper instance.
Fixes: 643231b28380 ("drm/fbdev-generic: Minimize hotplug error handling")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216140620.17699-1-tzimmermann@suse.de
|
|
Two fixes for SLAB and SLUB
- Make it possible to use kmem_cache_alloc_bulk() early in boot when
interrupts are not yet enabled, as code doing that start to appear via
the maple tree (by Thomas Gleixner).
- Fix debugfs-related memory leak (by Greg Kroah-Hartman).
|
|
When devlink instance is put into network namespace and that network
namespace gets deleted, devlink instance is moved back into init_ns.
This is done as a part of cleanup_net() routine. Since cleanup_net()
is called asynchronously from workqueue, there is no guarantee that
the devlink instance move is done after "ip netns del" returns.
So fix this race by making sure that the devlink instance is present
before any other operation.
Reported-by: Amir Tzin <amirtz@nvidia.com>
Fixes: b74c37fd35a2 ("selftests: netdevsim: add tests for devlink reload with resources")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230220132336.198597-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A bunch of cleanups for SLAB and SLUB:
- Use the standard idiom to get head page of folio (by SeongJae Park)
- Simplify and inline is_debug_pagealloc_cache() in SLAB (by lvqian)
- Remove unused variable in SLAB (by Gou Hao)
|
|
Usage of `set -e` before executing a command causes immediate exit
on failure, without cleanup up the resources allocated at setup.
This can affect the next tests that use the same resources,
leading to a chain of failures.
A simple fix is to always call cleanup function when the script exists.
This approach is already used by other existing tests.
Fixes: 1056691b2680 ("selftests: fib_tests: Make test results more verbose")
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Link: https://lore.kernel.org/r/20230220110400.26737-2-roxana.nicolescu@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
From 2.41 to 2.42
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We update ses->ip_addr whenever we do a session setup.
But this should happen only for primary channel in mchan
scenario.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In smb2_reconnect_server, we allocate a dummy tcon for
calling reconnect for just the session. This should be
allocated using tconInfoAlloc, and not kmalloc.
Fixes: 3663c9045f51 ("cifs: check reconnects for channels of active tcons too")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Till now, we've used a simple round robin approach to
distribute the requests between the channels. This does
not work well if the channels consume the requests at
different speeds, even if the advertised speeds are the
same.
This change will allow the client to pick the channel
with least number of requests currently in-flight. This
will disregard the link speed, and select a channel
based on the current load of the channels.
For cases when all the channels are equally loaded,
fall back to the old round robin method.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Due to CPLD firmware bugs, set CPLD syscon-reboot priority level to 64
(between rstcr and watchdog) to ensure that rstcr's global-utilities reset
method which is preferred stay as default one, and to ensure that CPLD
syscon-reboot is more preferred than watchdog reset method.
Fixes: 0531a4abd1c6 ("powerpc: dts: turris1x.dts: Add CPLD reboot node")
Depends-on: e6333293f27c ("power: reset: syscon-reboot: Add support for specifying priority")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230220080435.4237-1-pali@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform update from Ingo Molnar:
- Simplify add_rtc_cmos()
- Use strscpy() in the mcelog code
* tag 'x86-platform-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/dev-mcelog: use strscpy() to instead of strncpy()
x86/rtc: Simplify PNP ids check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm update from Ingo Molnar:
"Micro-optimize __flush_tlb_all()"
* tag 'x86-mm-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Use cpu_feature_enabled() when checking global pages support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Ingo Molnar:
- Replace zero-length array in struct xregs_state with flexible-array
member, to help the enabling of stricter compiler checks.
- Don't set TIF_NEED_FPU_LOAD for PF_IO_WORKER threads.
* tag 'x86-fpu-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Don't set TIF_NEED_FPU_LOAD for PF_IO_WORKER threads
x86/fpu: Replace zero-length array in struct xregs_state with flexible-array member
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Ingo Molnar:
- Clean up the signal frame layout tests
- Suppress KMSAN false positive reports in arch_within_stack_frames()
* tag 'x86-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Suppress KMSAN reports in arch_within_stack_frames()
x86/signal/compat: Move sigaction_compat_abi() to signal_64.c
x86/signal: Move siginfo field tests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build update from Ingo Molnar:
"Make the 64-bit defconfig the x86 default for all builds, unless
x86-32 is requested explicitly"
* tag 'x86-build-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Make 64-bit defconfig the default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Robustify/fix calling startup_{32,64}() from the decompressor code,
and removing x86 quirk from scripts/head-object-list.txt as a result.
- Do not register processors that cannot be onlined for x2APIC
* tag 'x86-boot-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC
scripts/head-object-list: Remove x86 from the list
x86/boot: Robustify calling startup_{32,64}() from the decompressor code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
"Header fixes and a DocBook fix"
* tag 'x86-asm-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/lib: Fix compiler and kernel-doc warnings
x86/lib: Include <asm/misc.h> to fix a missing prototypes warning at build time
|
|
Add compatibles for the Cortex-A715 and X3 cores found in some
recent flagship designs.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230216110803.3945747-1-konrad.dybcio@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- Misc other cleanups, fixes
* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
- Optimize perf_sample_data layout
- Prepare sample data handling for BPF integration
- Update the x86 PMU driver for Intel Meteor Lake
- Restructure the x86 uncore code to fix a SPR (Sapphire Rapids)
discovery breakage
- Fix the x86 Zhaoxin PMU driver
- Cleanups
* tag 'perf-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
perf/x86/intel/uncore: Add Meteor Lake support
x86/perf/zhaoxin: Add stepping check for ZXC
perf/x86/intel/ds: Fix the conversion from TSC to perf time
perf/x86/uncore: Don't WARN_ON_ONCE() for a broken discovery table
perf/x86/uncore: Add a quirk for UPI on SPR
perf/x86/uncore: Ignore broken units in discovery table
perf/x86/uncore: Fix potential NULL pointer in uncore_get_alias_name
perf/x86/uncore: Factor out uncore_device_to_die()
perf/core: Call perf_prepare_sample() before running BPF
perf/core: Introduce perf_prepare_header()
perf/core: Do not pass header for sample ID init
perf/core: Set data->sample_flags in perf_prepare_sample()
perf/core: Add perf_sample_save_brstack() helper
perf/core: Add perf_sample_save_raw_data() helper
perf/core: Add perf_sample_save_callchain() helper
perf/core: Save the dynamic parts of sample data size
x86/kprobes: Use switch-case for 0xFF opcodes in prepare_emulation
perf/core: Change the layout of perf_sample_data
perf/x86/msr: Add Meteor Lake support
perf/x86/cstate: Add Meteor Lake support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- rwsem micro-optimizations
- spinlock micro-optimizations
- cleanups, simplifications
* tag 'locking-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vduse: Remove include of rwlock.h
locking/lockdep: Remove lockdep_init_map_crosslock.
x86/ACPI/boot: Use try_cmpxchg() in __acpi_{acquire,release}_global_lock()
x86/PAT: Use try_cmpxchg() in set_page_memtype()
locking/rwsem: Disable preemption in all down_write*() and up_write() code paths
locking/rwsem: Disable preemption in all down_read*() and up_read() code paths
locking/rwsem: Prevent non-first waiter from spinning in down_write() slowpath
locking/qspinlock: Micro-optimize pending state waiting for unlock
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 fixes for the v6.3 merge window:
- Fix eDP+DSI dual panel systems
- Fix system suspend when fbdev isn't initialized
- Fix memory leaks in scatterlist
- Fix some MCR register annotations
- Fix documentation build warnings
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v8k0xyx4.fsf@intel.com
|
|
Hardware requires an alignment to 64 bytes to return ASO data. Missing
this alignment caused to unpredictable results while ASO events were
generated.
Fixes: 8518d05b8f9a ("net/mlx5e: Create Advanced Steering Operation object for IPsec")
Reported-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/de0302c572b90c9224a72868d4e0d657b6313c4b.1676797613.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-02-15
1) From Gal Tariq and Parav, Few cleanups for mlx5 driver.
2) From Vlad: Allow offloading of ct 'new' match based on [1]
[1] https://lore.kernel.org/netdev/20230201163100.1001180-1-vladbu@nvidia.com/
* tag 'mlx5-updates-2023-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: RX, Remove doubtful unlikely call
net/mlx5e: Fix outdated TLS comment
net/mlx5e: Remove unused function mlx5e_sq_xmit_simple
net/mlx5e: Allow offloading of ct 'new' match
net/mlx5e: Implement CT entry update
net/mlx5: Simplify eq list traversal
net/mlx5e: Remove redundant page argument in mlx5e_xdp_handle()
net/mlx5e: Remove redundant page argument in mlx5e_xmit_xdp_buff()
net/mlx5e: Switch to using napi_build_skb()
====================
Link: https://lore.kernel.org/r/20230218090513.284718-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Paul Blakey says:
====================
net/sched: cls_api: Support hardware miss to tc action
This series adds support for hardware miss to instruct tc to continue execution
in a specific tc action instance on a filter's action list. The mlx5 driver patch
(besides the refactors) shows its usage instead of using just chain restore.
Currently a filter's action list must be executed all together or
not at all as driver are only able to tell tc to continue executing from a
specific tc chain, and not a specific filter/action.
This is troublesome with regards to action CT, where new connections should
be sent to software (via tc chain restore), and established connections can
be handled in hardware.
Checking for new connections is done when executing the ct action in hardware
(by checking the packet's tuple against known established tuples).
But if there is a packet modification (pedit) action before action CT and the
checked tuple is a new connection, hardware will need to revert the previous
packet modifications before sending it back to software so it can
re-match the same tc filter in software and re-execute its CT action.
The following is an example configuration of stateless nat
on mlx5 driver that isn't supported before this patchet:
#Setup corrosponding mlx5 VFs in namespaces
$ ip netns add ns0
$ ip netns add ns1
$ ip link set dev enp8s0f0v0 netns ns0
$ ip netns exec ns0 ifconfig enp8s0f0v0 1.1.1.1/24 up
$ ip link set dev enp8s0f0v1 netns ns1
$ ip netns exec ns1 ifconfig enp8s0f0v1 1.1.1.2/24 up
#Setup tc arp and ct rules on mxl5 VF representors
$ tc qdisc add dev enp8s0f0_0 ingress
$ tc qdisc add dev enp8s0f0_1 ingress
$ ifconfig enp8s0f0_0 up
$ ifconfig enp8s0f0_1 up
#Original side
$ tc filter add dev enp8s0f0_0 ingress chain 0 proto ip flower \
ct_state -trk ip_proto tcp dst_port 8888 \
action pedit ex munge tcp dport set 5001 pipe \
action csum ip tcp pipe \
action ct pipe \
action goto chain 1
$ tc filter add dev enp8s0f0_0 ingress chain 1 proto ip flower \
ct_state +trk+est \
action mirred egress redirect dev enp8s0f0_1
$ tc filter add dev enp8s0f0_0 ingress chain 1 proto ip flower \
ct_state +trk+new \
action ct commit pipe \
action mirred egress redirect dev enp8s0f0_1
$ tc filter add dev enp8s0f0_0 ingress chain 0 proto arp flower \
action mirred egress redirect dev enp8s0f0_1
#Reply side
$ tc filter add dev enp8s0f0_1 ingress chain 0 proto arp flower \
action mirred egress redirect dev enp8s0f0_0
$ tc filter add dev enp8s0f0_1 ingress chain 0 proto ip flower \
ct_state -trk ip_proto tcp \
action ct pipe \
action pedit ex munge tcp sport set 8888 pipe \
action csum ip tcp pipe \
action mirred egress redirect dev enp8s0f0_0
#Run traffic
$ ip netns exec ns1 iperf -s -p 5001&
$ sleep 2 #wait for iperf to fully open
$ ip netns exec ns0 iperf -c 1.1.1.2 -p 8888
#dump tc filter stats on enp8s0f0_0 chain 0 rule and see hardware packets:
$ tc -s filter show dev enp8s0f0_0 ingress chain 0 proto ip | grep "hardware.*pkt"
Sent hardware 9310116832 bytes 6149672 pkt
Sent hardware 9310116832 bytes 6149672 pkt
Sent hardware 9310116832 bytes 6149672 pkt
A new connection executing the first filter in hardware will first rewrite
the dst port to the new port, and then the ct action is executed,
because this is a new connection, hardware will need to be send this back
to software, on chain 0, to execute the first filter again in software.
The dst port needs to be reverted otherwise it won't re-match the old
dst port in the first filter. Because of that, currently mlx5 driver will
reject offloading the above action ct rule.
This series adds support for hardware partially executing a filter's action list,
and letting tc software continue processing in the specific action instance
where hardware left off (in the above case after the "action pedit ex munge tcp
dport... of the first rule") allowing support for scenarios such as the above.
====================
Link: https://lore.kernel.org/r/20230217223620.28508-1-paulb@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, CT misses restore the missed chain on the tc skb extension so
tc will continue from the relevant chain. Instead, restore the CT action's
miss cookie on the extension, which will instruct tc to continue from the
this specific CT action instance on the relevant filter's action list.
Map the CT action's miss_cookie to a new miss object (ACT_MISS), and use
this miss mapping instead of the current chain miss object (CHAIN_MISS)
for CT action misses.
To restore this new miss mapping value, add a RX restore rule for each
such mapping value.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Sholmo <ozsh@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reg usage is always a mapped object, not necessarily
containing chain info.
Rename to properly convey what it stores.
This patch doesn't change any functionality.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move tc miss handling code to en_tc.c, and remove
duplicate code.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tc skb extension is a basic requirement for using tc
offload to support correct restoration on action miss.
Depend on it.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To support hardware miss to tc action in actions on the flower
classifier, implement the required getting of filter actions,
and setup filter exts (actions) miss by giving it the filter's
handle and actions.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To support miss to action during hardware offload the filter's
handle is needed when setting up the actions (tcf_exts_init()),
and before offloading.
Move filter handle initialization earlier.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For drivers to support partial offload of a filter's action list,
add support for action miss to specify an action instance to
continue from in sw.
CT action in particular can't be fully offloaded, as new connections
need to be handled in software. This imposes other limitations on
the actions that can be offloaded together with the CT action, such
as packet modifications.
Assign each action on a filter's action list a unique miss_cookie
which drivers can then use to fill action_miss part of the tc skb
extension. On getting back this miss_cookie, find the action
instance with relevant cookie and continue classifying from there.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct tc_action->act_cookie is a user defined cookie,
and the related struct flow_action_entry->act_cookie is
used as an handle similar to struct flow_cls_offload->cookie.
Rename tc_action->act_cookie to user_cookie, and
flow_action_entry->act_cookie to cookie so their names
would better fit their usage.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next
Stefan Schmidt says:
====================
pull-request: ieee802154-next 2023-02-20
Miquel Raynal build upon his earlier work and introduced two new
features into the ieee802154 stack. Beaconing to announce existing
PAN's and passive scanning to discover the beacons and associated
PAN's. The matching changes to the userspace configuration tool
have been posted as well and will be released together with the
kernel release.
Arnd Bergmann and Dmitry Torokhov worked on converting the
at86rf230 and cc2520 drivers away from the unused platform_data
usage and towards the new gpiod API. (I had to add a revert as
Dmitry found a regression on an already pushed tree on my side).
Changes since v1 (pull request 2023-02-02)
- Netlink API extack and NLA_POLICY* usage as suggested by Jakub
- Removed always true condition found by kernel test robot
- Simplify device removal with running background job for scanning
- Fix problems with beacon sending in some cases by using the MLME
tx path
* tag 'ieee802154-for-net-next-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next:
ieee802154: Drop device trackers
mac802154: Fix an always true condition
mac802154: Send beacons using the MLME Tx path
ieee802154: Change error code on monitor scan netlink request
ieee802154: Convert scan error messages to extack
ieee802154: Use netlink policies when relevant on scan parameters
ieee802154: at86rf230: switch to using gpiod API
ieee802154: at86rf230: drop support for platform data
Revert "at86rf230: convert to gpio descriptors"
cc2520: move to gpio descriptors
mac802154: Avoid superfluous endianness handling
at86rf230: convert to gpio descriptors
mac802154: Handle basic beaconing
ieee802154: Add support for user beaconing requests
mac802154: Handle passive scanning
mac802154: Add MLME Tx locked helpers
mac802154: Prepare forcing specific symbol duration
ieee802154: Introduce a helper to validate a channel
ieee802154: Define a beacon frame header
ieee802154: Add support for user scanning requests
====================
Link: https://lore.kernel.org/r/20230220213749.386451-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an embarrassingly missed semicolon plus and embarrassingly missed
parenthesis breaking kernel building when CONFIG_RTC_LIB is not set
like the one reported with ia64 config.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302170047.EjCPizu3-lkp@intel.com/
Fixes: 14743ddd2495 ("sfc: add devlink info support for ef100")
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Link: https://lore.kernel.org/r/20230220110133.29645-1-alejandro.lucero-palau@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix some indentngs and remove the warning below:
drivers/net/ethernet/sfc/mae.c:657 efx_mae_enumerate_mports() warn: inconsistent indenting
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4117
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230220065958.52941-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The call "skb_copy_from_linear_data(skb, inl + 1, spc)" triggers a FORTIFY
memcpy() warning on ppc64 platform:
In function ‘fortify_memcpy_chk’,
inlined from ‘skb_copy_from_linear_data’ at ./include/linux/skbuff.h:4029:2,
inlined from ‘build_inline_wqe’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:722:4,
inlined from ‘mlx4_en_xmit’ at drivers/net/ethernet/mellanox/mlx4/en_tx.c:1066:3:
./include/linux/fortify-string.h:513:25: error: call to ‘__write_overflow_field’ declared with
attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()?
[-Werror=attribute-warning]
513 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Same behaviour on x86 you can get if you use "__always_inline" instead of
"inline" for skb_copy_from_linear_data() in skbuff.h
The call here copies data into inlined tx destricptor, which has 104
bytes (MAX_INLINE) space for data payload. In this case "spc" is known
in compile-time but the destination is used with hidden knowledge
(real structure of destination is different from that the compiler
can see). That cause the fortify warning because compiler can check
bounds, but the real bounds are different. "spc" can't be bigger than
64 bytes (MLX4_INLINE_ALIGN), so the data can always fit into inlined
tx descriptor. The fact that "inl" points into inlined tx descriptor is
determined earlier in mlx4_en_xmit().
Avoid confusing the compiler with "inl + 1" constructions to get to past
the inl header by introducing a flexible array "data" to the struct so
that the compiler can see that we are not dealing with an array of inl
structs, but rather, arbitrary data following the structure. There are
no changes to the structure layout reported by pahole, and the resulting
machine code is actually smaller.
Reported-by: Josef Oskera <joskera@redhat.com>
Link: https://lore.kernel.org/lkml/20230217094541.2362873-1-joskera@redhat.com
Fixes: f68f2ff91512 ("fortify: Detect struct member overflows in memcpy() at compile-time")
Cc: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20230218183842.never.954-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
DIO to/from KVEC-type iterators should now work as the iterator is passed
down to the socket in non-RDMA/non-crypto mode and in RDMA or crypto mode
care is taken to handle vmap/vmalloc correctly and not take page refs when
building a scatterlist.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Tom Talpey <tom@talpey.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Remove a bunch of functions that are no longer used and are commented out
after the conversion to use iterators throughout the I/O path.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
Link: https://lore.kernel.org/r/164928621823.457102.8777804402615654773.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/165211421039.3154751.15199634443157779005.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/165348881165.2106726.2993852968344861224.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/165364827876.3334034.9331465096417303889.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/166126396915.708021.2010212654244139442.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/166697261080.61150.17513116912567922274.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/166732033255.3186319.5527423437137895940.stgit@warthog.procyon.org.uk/ # rfc
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In the depths of the cifs RDMA code, extract part of an iov iterator
directly into an SGE list without going through an intermediate
scatterlist.
Note that this doesn't support extraction from an IOBUF- or UBUF-type
iterator (ie. user-supplied buffer). The assumption is that the higher
layers will extract those to a BVEC-type iterator first and do whatever is
required to stop the pages from going away.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Tom Talpey <tom@talpey.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-rdma@vger.kernel.org
Link: https://lore.kernel.org/r/166697260361.61150.5064013393408112197.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/166732032518.3186319.1859601819981624629.stgit@warthog.procyon.org.uk/ # rfc
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently, the cifs I/O paths hand lists of pages from the VM interface
routines at the top all the way through the intervening layers to the
socket interface at the bottom.
This is a problem, however, for interfacing with netfslib which passes an
iterator through to the ->issue_read() method (and will pass an iterator
through to the ->issue_write() method in future). Netfslib takes over
bounce buffering for direct I/O, async I/O and encrypted content, so cifs
doesn't need to do that. Netfslib also converts IOVEC-type iterators into
BVEC-type iterators if necessary.
Further, cifs needs foliating - and folios may come in a variety of sizes,
so a page list pointing to an array of heterogeneous pages may cause
problems in places such as where crypto is done.
Change the cifs I/O paths to hand iov_iter iterators all the way through
instead.
Notes:
(1) Some old routines are #if'd out to be removed in a follow up patch so
as to avoid confusing diff, thereby making the diff output easier to
follow. I've removed functions that don't overlap with anything
added.
(2) struct smb_rqst loses rq_pages, rq_offset, rq_npages, rq_pagesz and
rq_tailsz which describe the pages forming the buffer; instead there's
an rq_iter describing the source buffer and an rq_buffer which is used
to hold the buffer for encryption.
(3) struct cifs_readdata and cifs_writedata are similarly modified to
smb_rqst. The ->read_into_pages() and ->copy_into_pages() are then
replaced with passing the iterator directly to the socket.
The iterators are stored in these structs so that they are persistent
and don't get deallocated when the function returns (unlike if they
were stack variables).
(4) Buffered writeback is overhauled, borrowing the code from the afs
filesystem to gather up contiguous runs of folios. The XARRAY-type
iterator is then used to refer directly to the pagecache and can be
passed to the socket to transmit data directly from there.
This includes:
cifs_extend_writeback()
cifs_write_back_from_locked_folio()
cifs_writepages_region()
cifs_writepages()
(5) Pages are converted to folios.
(6) Direct I/O uses netfs_extract_user_iter() to create a BVEC-type
iterator from an IOBUF/UBUF-type source iterator.
(7) smb2_get_aead_req() uses netfs_extract_iter_to_sg() to extract page
fragments from the iterator into the scatterlists that the crypto
layer prefers.
(8) smb2_init_transform_rq() attached pages to smb_rqst::rq_buffer, an
xarray, to use as a bounce buffer for encryption. An XARRAY-type
iterator can then be used to pass the bounce buffer to lower layers.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Paulo Alcantara <pc@cjr.nz>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
Link: https://lore.kernel.org/r/164311907995.2806745.400147335497304099.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/164928620163.457102.11602306234438271112.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/165211420279.3154751.15923591172438186144.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/165348880385.2106726.3220789453472800240.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/165364827111.3334034.934805882842932881.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/166126396180.708021.271013668175370826.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/166697259595.61150.5982032408321852414.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/166732031756.3186319.12528413619888902872.stgit@warthog.procyon.org.uk/ # rfc
Signed-off-by: Steve French <stfrench@microsoft.com>
|
