| Age | Commit message (Collapse) | Author |
|---|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Micro-optimizations:
1. The value of rqstp->rq_auth_stat is replaced no matter which
arm of the switch is taken, so the initial assignment can be
safely removed.
2. Avoid checking the value of gc->gc_proc twice in the I/O
(RPC_GSS_PROC_DATA) path.
The cost is a little extra code redundancy.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: To help orient readers, name the stack variables to match
the XDR field names.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: To help orient readers, name the stack variables to match
the XDR field names.
For readability, I'm also going to rename the unwrap and wrap
functions in a consistent manner, starting with unwrap_integ_data().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up / code de-duplication - this functionality is already
available in the generic XDR layer.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The entire RPC_GSS_PROC_INIT path is converted over to xdr_stream
for decoding the Call credential and verifier.
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
gss_read_verf() is already short. Fold it into its only caller.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
gss_read_common_verf() is now just a wrapper for dup_netobj(), thus
it can be replaced with direct calls to dup_netobj().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pre-requisite to replacing gss_read_common_verf().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since upcalls are infrequent, ensure the compiler places the upcall
mechanism out-of-line from the I/O path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Since the server-side of the Linux kernel SunRPC implementation
ignores the contents of the Call's machinename field, there's no
need for its RPC_AUTH_UNIX authenticator to reject names that are
larger than UNX_MAXNODENAME.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
RFC 5531 defines the body of an RPC Call message like this:
struct call_body {
unsigned int rpcvers;
unsigned int prog;
unsigned int vers;
unsigned int proc;
opaque_auth cred;
opaque_auth verf;
/* procedure-specific parameters start here */
};
In the current server code, decoding a struct opaque_auth type is
open-coded in several places, and is thus difficult to harden
everywhere.
Introduce a helper for decoding an opaque_auth within the context
of a xdr_stream. This helper can be shared with all authentication
flavor implemenations, even on the client-side.
Done as part of hardening the server-side RPC header decoding paths.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor: So that the overhaul of each ->accept method can be done
in separate smaller patches, temporarily move the
svcxdr_init_decode() call into those methods.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that all vs_dispatch functions invoke svcxdr_init_decode(), it
is common code and can be pushed down into the generic RPC server.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now with NFSD being able to cross into auto mounts,
the check can be removed.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This function is only used by NFSD to cross mount points.
If a mount point is of type auto mount, follow_down() will
not uncover it. Add LOOKUP_AUTOMOUNT to the lookup flags
to have ->d_automount() called when NFSD walks down the
mount tree.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently nfsd_mountpoint() tests for mount points using d_mountpoint(),
this works only when a mount point is already uncovered.
In our case the mount point is of type auto mount and can be coverted.
i.e. ->d_automount() was not called.
Using d_managed() nfsd_mountpoint() can test whether a mount point is
either already uncovered or can be uncovered later.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When neither LANTIQ nor MIPS_MALTA is set, 'physical_memsize' is not
declared. This causes the build to fail with:
mips-linux-ld: arch/mips/kernel/vpe-mt.o: in function `vpe_run':
arch/mips/kernel/vpe-mt.c:(.text.vpe_run+0x280): undefined reference to `physical_memsize'
LANTIQ is not using 'physical_memsize' and MIPS_MALTA's use of it is
self-contained in mti-malta/malta-dtshim.c.
Use of physical_memsize in vpe-mt.c appears to be unused, so eliminate
this loader mode completely and require VPE programs to be compiled with
DFLT_STACK_SIZE and DFLT_HEAP_SIZE defined.
Fixes: 9050d50e2244 ("MIPS: lantiq: Set physical_memsize")
Fixes: 1a2a6d7e8816 ("MIPS: APRP: Split VPE loader into separate files.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202302030625.2g3E98sY-lkp@intel.com/
Cc: Dengcheng Zhu <dzhu@wavecomp.com>
Cc: John Crispin <john@phrozen.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: "Steven J. Hill" <Steven.Hill@imgtec.com>
Cc: Qais Yousef <Qais.Yousef@imgtec.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Stephen Rothwell reported htmldocs warning when merging driver-core tree
for linux-next:
Documentation/filesystems/api-summary:146: fs/debugfs/inode.c:804: WARNING: Inline literal start-string without end-string.
The warning is due to inline constant formatting (``%CONST``) doesn't play
nice with complex-name constants like ERR_PTR(-ERROR).
Drop the formatting for that constant above to be consistent with similar
error constants and also to fix the above warning.
Link: https://lore.kernel.org/lkml/20230220163133.481e43d8@canb.auug.org.au/
Fixes: d3002468cb5d5d ("debugfs: update comment of debugfs_rename()")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20230220124721.11657-1-bagasdotme@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When we suspend into s2idle we also need to enable the interrupt line
that generates the MPD and HFB interrupts towards the host CPU interrupt
controller (typically the ARM GIC or MIPS L1) to make it exit s2idle.
When we suspend into other modes such as "standby" or "mem" we engage a
power management state machine which will gate off the CPU L1 controller
(priv->irq0) and ungate the side band wake-up interrupt (priv->wol_irq).
It is safe to have both enabled as wake-up sources because they are
mutually exclusive given any suspend mode.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a followup of commit 2558b8039d05 ("net: use a bounce
buffer for copying skb->mark")
x86 and powerpc define user_access_begin, meaning
that they are not able to perform user copy checks
when using user_write_access_begin() / unsafe_copy_to_user()
and friends [1]
Instead of waiting bugs to trigger on other arches,
add a check_object_size() in put_cmsg() to make sure
that new code tested on x86 with CONFIG_HARDENED_USERCOPY=y
will perform more security checks.
[1] We can not generically call check_object_size() from
unsafe_copy_to_user() because UACCESS is enabled at this point.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The recent merge from net left-over some unused code in
leftover.c - nomen omen.
Just drop the unused bits.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-02-17 - fixed
this is a pull request of 4 patches for net-next/master.
The first patch is by Yang Li and converts the ctucanfd driver to
devm_platform_ioremap_resource().
The last 3 patches are by Frank Jungclaus, target the esd_usb driver
and contains preparations for the upcoming support of the esd
CAN-USB/3 hardware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 81e164c4aec5 ("net: microchip: sparx5: Add automatic
selection of VCAP rule actionset") the VCAP API has the capability to
select automatically the actionset based on the actions that are attached
to the rule. So it is not needed anymore to hardcode the actionset in the
driver, therefore it is OK to remove this.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Paolo Abeni says:
====================
net: default_rps_mask follow-up
The first patch namespacify the setting. In the common case, once
proper isolation is in place in the main namespace, forwarding
to/from each child netns will allways happen on the desidered CPUs.
Any additional RPS stage inside the child namespace will not provide
additional isolation and could hurt performance badly if picking a
CPU on a remote node.
The 2nd patch adds more self-tests coverage.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Explicitly check for child netns and main ns independency
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
That really was meant to be a per netns attribute from the beginning.
The idea is that once proper isolation is in place in the main
namespace, additional demux in the child namespaces will be redundant.
Let's make child netns default rps mask empty by default.
To avoid bloating the netns with a possibly large cpumask, allocate
it on-demand during the first write operation.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.3
Third set of patches for v6.3. This time only a set of small fixes
submitted during the last day or two.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add safeguard to check for NULL tupe in objects updates via
NFT_MSG_NEWOBJ, this should not ever happen. From Alok Tiwari.
2) Incorrect pointer check in the new destroy rule command,
from Yang Yingliang.
3) Incorrect status bitcheck in nf_conntrack_udp_packet(),
from Florian Westphal.
4) Simplify seq_print_acct(), from Ilia Gavrilov.
5) Use 2-arg optimal variant of kfree_rcu() in IPVS,
from Julian Anastasov.
6) TCP connection enters CLOSE state in conntrack for locally
originated TCP reset packet from the reject target,
from Florian Westphal.
The fixes #2 and #3 in this series address issues from the previous pull
nf-next request in this net-next cycle.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The vcap_admin structures in vcap_api_next_lookup_advanced_test()
take several hundred bytes of stack frame, but when CONFIG_KASAN_STACK
is enabled, each one of them also has extra padding before and after
it, which ends up blowing the warning limit:
In file included from drivers/net/ethernet/microchip/vcap/vcap_api.c:3521:
drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c: In function 'vcap_api_next_lookup_advanced_test':
drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:1954:1: error: the frame size of 1448 bytes is larger than 1400 bytes [-Werror=frame-larger-than=]
1954 | }
Reduce the total stack usage by replacing the five structures with
an array that only needs one pair of padding areas.
Fixes: 1f741f001160 ("net: microchip: sparx5: Add KUNIT tests for enabling/disabling chains")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One local variable has become unused after a recent change:
drivers/net/ethernet/sfc/ef100_nic.c: In function 'ef100_probe_netdev_pf':
drivers/net/ethernet/sfc/ef100_nic.c:1155:21: error: unused variable 'net_dev' [-Werror=unused-variable]
struct net_device *net_dev = efx->net_dev;
^~~~~~~
The variable is still used in an #ifdef. Replace the #ifdef with
an if(IS_ENABLED()) check that lets the compiler see where it is
used, rather than adding another #ifdef.
This also fixes an uninitialized return value in ef100_probe_netdev_pf()
that gcc did not spot.
Fixes: 7e056e2360d9 ("sfc: obtain device mac address based on firmware handle for ef100")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Devlink reload patchset introduced regression. ICE_VSI_LB wasn't
taken into account when doing default allocation. Fix it by adding a
case for ICE_VSI_LB in ice_vsi_alloc_def().
Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a spelling mistake in a pci_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds workaround for below 2 HW erratas
1. Due to improper clock gating, NIXRX may free the same
NPA buffer multiple times.. to avoid this, always enable
NIX RX conditional clock.
2. NIX FIFO does not get initialized on reset, if the SMQ
flush is triggered before the first packet is processed, it
will lead to undefined state. The workaround to perform SMQ
flush only if packet count is non-zero in MDQ.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A PHY driver can use a static integer value to indicate what link mode
features it supports, i.e, its abilities.. This is the old way, but
useful when dynamically determining the devices features does not
work, e.g. support of fibre.
EEE support has been moved into phydev->supported_eee. This needs to
be set otherwise the code assumes EEE is not supported. It is normally
set as part of reading the devices abilities. However if a static
integer value was used, the dynamic reading of the abilities is not
performed. Add a call to genphy_c45_read_eee_abilities() to read the
EEE abilities.
Fixes: 8b68710a3121 ("net: phy: start using genphy_c45_ethtool_get/set_eee()")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Andrew Lunn says:
====================
Add additional phydev locks
The phydev lock should be held when accessing members of phydev, or
calling into the driver. Some of the phy_ethtool_ functions are
missing locks. Add them. To avoid deadlock the marvell driver is
modified since it calls one of the functions which gain locks, which
would result in a deadlock.
The missing locks have not caused noticeable issues, so these patches
are for net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The phydev lock should be held while accessing members of phydev,
or calling into the driver.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
phy_ethtool_get_eee() is about to gain locking of the phydev lock.
This means it cannot be used within a PHY driver without causing a
deadlock. Swap to using genphy_c45_ethtool_get_eee() which assumes the
lock has already been taken.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the bcmgenet_mii_config() code was refactored it was missed
that the LED control for the MoCA interface got overwritten by
the port_ctrl value. Its previous programming is restored here.
Fixes: 4f8d81b77e66 ("net: bcmgenet: Refactor register access in bcmgenet_mii_config")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a file descriptor of pppol2tp socket is passed as file descriptor
of UDP socket, a recursive deadlock occurs in l2tp_tunnel_register().
This situation is reproduced by the following program:
int main(void)
{
int sock;
struct sockaddr_pppol2tp addr;
sock = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP);
if (sock < 0) {
perror("socket");
return 1;
}
addr.sa_family = AF_PPPOX;
addr.sa_protocol = PX_PROTO_OL2TP;
addr.pppol2tp.pid = 0;
addr.pppol2tp.fd = sock;
addr.pppol2tp.addr.sin_family = PF_INET;
addr.pppol2tp.addr.sin_port = htons(0);
addr.pppol2tp.addr.sin_addr.s_addr = inet_addr("192.168.0.1");
addr.pppol2tp.s_tunnel = 1;
addr.pppol2tp.s_session = 0;
addr.pppol2tp.d_tunnel = 0;
addr.pppol2tp.d_session = 0;
if (connect(sock, (const struct sockaddr *)&addr, sizeof(addr)) < 0) {
perror("connect");
return 1;
}
return 0;
}
This program causes the following lockdep warning:
============================================
WARNING: possible recursive locking detected
6.2.0-rc5-00205-gc96618275234 #56 Not tainted
--------------------------------------------
repro/8607 is trying to acquire lock:
ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: l2tp_tunnel_register+0x2b7/0x11c0
but task is already holding lock:
ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(sk_lock-AF_PPPOX);
lock(sk_lock-AF_PPPOX);
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by repro/8607:
#0: ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30
stack backtrace:
CPU: 0 PID: 8607 Comm: repro Not tainted 6.2.0-rc5-00205-gc96618275234 #56
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x100/0x178
__lock_acquire.cold+0x119/0x3b9
? lockdep_hardirqs_on_prepare+0x410/0x410
lock_acquire+0x1e0/0x610
? l2tp_tunnel_register+0x2b7/0x11c0
? lock_downgrade+0x710/0x710
? __fget_files+0x283/0x3e0
lock_sock_nested+0x3a/0xf0
? l2tp_tunnel_register+0x2b7/0x11c0
l2tp_tunnel_register+0x2b7/0x11c0
? sprintf+0xc4/0x100
? l2tp_tunnel_del_work+0x6b0/0x6b0
? debug_object_deactivate+0x320/0x320
? lockdep_init_map_type+0x16d/0x7a0
? lockdep_init_map_type+0x16d/0x7a0
? l2tp_tunnel_create+0x2bf/0x4b0
? l2tp_tunnel_create+0x3c6/0x4b0
pppol2tp_connect+0x14e1/0x1a30
? pppol2tp_put_sk+0xd0/0xd0
? aa_sk_perm+0x2b7/0xa80
? aa_af_perm+0x260/0x260
? bpf_lsm_socket_connect+0x9/0x10
? pppol2tp_put_sk+0xd0/0xd0
__sys_connect_file+0x14f/0x190
__sys_connect+0x133/0x160
? __sys_connect_file+0x190/0x190
? lockdep_hardirqs_on+0x7d/0x100
? ktime_get_coarse_real_ts64+0x1b7/0x200
? ktime_get_coarse_real_ts64+0x147/0x200
? __audit_syscall_entry+0x396/0x500
__x64_sys_connect+0x72/0xb0
do_syscall_64+0x38/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
This patch fixes the issue by getting/creating the tunnel before
locking the pppol2tp socket.
Fixes: 0b2c59720e65 ("l2tp: close all race conditions in l2tp_tunnel_register()")
Cc: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the device is plugged/unplugged without giving time for mcp_init_work()
to complete, we might kick in the devm free code path and thus have
unavailable struct mcp_2221 while in delayed work.
Canceling the delayed_work item is enough to solve the issue, because
cancel_delayed_work_sync will prevent the work item to requeue itself.
Fixes: 960f9df7c620 ("HID: mcp2221: add ADC/DAC support via iio subsystem")
CC: stable@vger.kernel.org
Acked-by: Jiri Kosina <jkosina@suse.cz>
Link: https://lore.kernel.org/r/20230215-wip-mcp2221-v2-1-109f71fd036e@redhat.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
|
|
Eric Dumazet says:
====================
ipv6: icmp6: better drop reason support
This series aims to have more precise drop reason reports for icmp6.
This should reduce false positives on most usual cases.
This can be extended as needed later.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change icmpv6_echo_reply() to return a drop reason.
For the moment, return NOT_SPECIFIED or SKB_CONSUMED.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hosts can often receive neighbour discovery messages
that are not for them.
Use a dedicated drop reason to make clear the packet is dropped
for this normal case.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a generic drop reason for any error detected
in ndisc_parse_options().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
