| Age | Commit message (Collapse) | Author |
|---|
|
These snd_rawmidi_ops structures are only passed as the third
argument of snd_rawmidi_set_ops. This argument is const, so the
snd_rawmidi_ops structures can be const too.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
The mtu3 driver is a generic driver for MediaTek usb3 DRD IP, add
a generic compatible to avoid confusion when support new SoCs but
use a compatible with specific SoC's name "mt8173".
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
The current f_hid driver doesn't handle GET_PROCOTOL and
SET_PROCOTOL requests, which are required to operate HID
gadgets in BOOT mode. This patch implements this feature for
devices that have the same implementation for REPORT and BOOT mode
so that these devices are recognized by older BIOSes.
Signed-off-by: Abdulhadi Mohamed <abdulahhadi2@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Ip sleep will auto exit if vbus comparison circuit of u2 phy is
disabled when system tries to enter suspend mode, so get vbus-valid
status from mac but not from u2 phy when enable DRD mode to fix
the issue.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
when the device is reset by host, the status of u1_enable and
u2_enable should also be restored to default value.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Add the delayed status handling. This is used by mass storage etc to
gain some extra time to setup its internal status before it can proceed
further requests, and once the gadget is ready, it will enqueue an
empty packet which is used for synchronization.
The issue may happen on some FGPA platform with very low cpu frequency.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Using devm_ioremap_resource() can make the code simpler, as it
already does the resource NULL check.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
qe_ep0_desc is only passed as the second argument to qe_ep_init, which is
const, so qe_ep0_desc can be const too.
Done with the help of Coccinelle.
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
This patch adds support for R-Car M3-W. This patch also adds R-Car
Gen3 generic version's compatible and changes ".compatible" in
the usb3_of_match from "renesas,r8a7796-usb3-peri" to
"renesas,rcar-gen3-usb3-peri".
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
HPLL is in fact not the clock we need. Remove the description of which clock we
failed to find a phandle to in order to avoid any further error.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
HPLL is in fact not the clock we need. Remove prescription of which clock to
avoid further error. Please refer to your datasheet and double check like I
should have.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add property "qcom,dtest-buffer" to specify which dtest rail to feed
when the pin is configured as a digital input.
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
GPIO LV (low voltage)/MV (medium voltage) subtypes have different
features and register mappings than 4CH/8CH subtypes. Add support
for LV and MV subtypes.
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This snd_rawmidi_ops structure is only passed as the third
argument of snd_rawmidi_set_ops. This argument is const, so the
snd_rawmidi_ops structure can be const too.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The power_supply subsystem tends to emit uevent every time
power_supply_changed() is called, so we should call this API only when battery
strength reported by the device is actually different from the previous
readings, otherwise we'll drown the system in uevents.
Fixes: 581c4484769e ("HID: input: map digitizer battery usage")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
When I cleaned up the Xen SYSCALL entries, I inadvertently changed
the reported segment registers. Before my patch, regs->ss was
__USER(32)_DS and regs->cs was __USER(32)_CS. After the patch, they
are FLAT_USER_CS/DS(32).
This had a couple unfortunate effects. It confused the
opportunistic fast return logic. It also significantly increased
the risk of triggering a nasty glibc bug:
https://sourceware.org/bugzilla/show_bug.cgi?id=21269
Update the Xen entry code to change it back.
Reported-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Fixes: 8a9949bc71a7 ("x86/xen/64: Rearrange the SYSCALL entries")
Link: http://lkml.kernel.org/r/daba8351ea2764bb30272296ab9ce08a81bd8264.1502775273.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU fix from Paul McKenney:
" This pull request is for an RCU change that permits waiting for grace
periods started by CPUs late in the process of going offline. Lack of
this capability is causing failures:
http://lkml.kernel.org/r/db9c91f6-1b17-6136-84f0-03c3c2581ab4@codeaurora.org"
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
variable 'data' may be used uninitialized in this function. thus,
'function dcs_get_backlight' will return unwanted value/fail.
Thus, adding NULL initialized to 'data' variable will solve the return
failure happening.
v2: Change commit message to reflect upstream with proper message
Fixes: 90198355b83c ("drm/i915/dsi: Add DCS control for Panel PWM")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Yetunde Adebisi <yetundex.adebisi@intel.com>
Cc: Deepak M <m.deepak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Balasubramaniam, Hari Chand <hari.chand.balasubramaniam@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502762746-191826-1-git-send-email-hari.chand.balasubramaniam@intel.com
|
|
Validate the compliance test link parameters when the compliance
test dpcd registers are read. Also validate them in compute_config
before using them since the max values might have been reduced
due to link training fallback.
If either the link rate or lane count is invalid, we still bail
from using the test parameters since the combination would not work
and instead use the fallback values.
v2:
* Added commit message to explain why we still bail when either of
of the params is invalid (Ville Syrjala)
* Add reason for validating in the comment (Jani Nikula)
* Also check if index >= 0 after validating (Jani Nikula)
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1496954463-18038-2-git-send-email-manasi.d.navare@intel.com
|
|
be validated
This function now takes the link rate and lane ocunt to be validated
as an argument so that this can be used for validating even the
compliance test link parameters.
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Tested-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1496954463-18038-1-git-send-email-manasi.d.navare@intel.com
|
|
A Senheisser headset requires the typical sample-rate quirk for
avoiding spurious errors from inquiring the current sample rate like:
usb 1-1: 2:1: cannot get freq at ep 0x4
usb 1-1: 3:1: cannot get freq at ep 0x83
The USB ID 1395:740a has to be added to the entries in
snd_usb_get_sample_rate_quirk().
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1052580
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Linux 4.13-rc5
There's a really nasty nouveau collision, hopefully someone can take a look
once I pushed this out.
|
|
commit 4842e98f26dd80be3623c4714a244ba52ea096a8 ("ALSA: seq: Fix race at
creating a queue") attempted to fix a race reported by syzkaller. That
fix has been described as follows:
"
When a sequencer queue is created in snd_seq_queue_alloc(),it adds the
new queue element to the public list before referencing it. Thus the
queue might be deleted before the call of snd_seq_queue_use(), and it
results in the use-after-free error, as spotted by syzkaller.
The fix is to reference the queue object at the right time.
"
Even with that fix in place, syzkaller reported a use-after-free error.
It specifically pointed to the last instruction "return q->queue" in
snd_seq_queue_alloc(). The pointer q is being used after kfree() has
been called on it.
It turned out that there is still a small window where a race can
happen. The window opens at
snd_seq_ioctl_create_queue()->snd_seq_queue_alloc()->queue_list_add()
and closes at
snd_seq_ioctl_create_queue()->queueptr()->snd_use_lock_use(). Between
these two calls, a different thread could delete the queue and possibly
re-create a different queue in the same location in queue_list.
This change prevents this situation by calling snd_use_lock_use() from
snd_seq_queue_alloc() prior to calling queue_list_add(). It is then the
caller's responsibility to call snd_use_lock_free(&q->use_lock).
Fixes: 4842e98f26dd ("ALSA: seq: Fix race at creating a queue")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Filtering the ACK packet was not put at the right place.
At this place, we already allocated a child and put it
into accept queue.
We absolutely need to call tcp_child_process() to release
its spinlock, or we will deadlock at accept() or close() time.
Found by syzkaller team (Thanks a lot !)
Fixes: 8fac365f63c8 ("tcp: Add a tcp_filter hook before handle ack packet")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzkaller reported that DCCP could have a non empty
write queue at dismantle time.
WARNING: CPU: 1 PID: 2953 at net/core/stream.c:199 sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 2953 Comm: syz-executor0 Not tainted 4.13.0-rc4+ #2
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
panic+0x1e4/0x417 kernel/panic.c:180
__warn+0x1c4/0x1d9 kernel/panic.c:541
report_bug+0x211/0x2d0 lib/bug.c:183
fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190
do_trap_no_signal arch/x86/kernel/traps.c:224 [inline]
do_trap+0x260/0x390 arch/x86/kernel/traps.c:273
do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:310
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323
invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:846
RIP: 0010:sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199
RSP: 0018:ffff8801d182f108 EFLAGS: 00010297
RAX: ffff8801d1144140 RBX: ffff8801d13cb280 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff85137b00 RDI: ffff8801d13cb280
RBP: ffff8801d182f148 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801d13cb4d0
R13: ffff8801d13cb3b8 R14: ffff8801d13cb300 R15: ffff8801d13cb3b8
inet_csk_destroy_sock+0x175/0x3f0 net/ipv4/inet_connection_sock.c:835
dccp_close+0x84d/0xc10 net/dccp/proto.c:1067
inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425
sock_release+0x8d/0x1e0 net/socket.c:597
sock_close+0x16/0x20 net/socket.c:1126
__fput+0x327/0x7e0 fs/file_table.c:210
____fput+0x15/0x20 fs/file_table.c:246
task_work_run+0x18a/0x260 kernel/task_work.c:116
exit_task_work include/linux/task_work.h:21 [inline]
do_exit+0xa32/0x1b10 kernel/exit.c:865
do_group_exit+0x149/0x400 kernel/exit.c:969
get_signal+0x7e8/0x17e0 kernel/signal.c:2330
do_signal+0x94/0x1ee0 arch/x86/kernel/signal.c:808
exit_to_usermode_loop+0x21c/0x2d0 arch/x86/entry/common.c:157
prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
syscall_return_slowpath+0x3a7/0x450 arch/x86/entry/common.c:263
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
copy_linear_skb() is broken; both of its callers actually
expect 'len' to be the amount we are trying to copy,
not the offset of the end.
Fix it keeping the meanings of arguments in sync with what the
callers (both of them) expect.
Also restore a saner behavior on EFAULT (i.e. preserving
the iov_iter position in case of failure):
The commit fd851ba9caa9 ("udp: harden copy_linear_skb()")
avoids the more destructive effect of the buggy
copy_linear_skb(), e.g. no more invalid memory access, but
said function still behaves incorrectly: when peeking with
offset it can fail with EINVAL instead of copying the
appropriate amount of memory.
Reported-by: Sasha Levin <alexander.levin@verizon.com>
Fixes: b65ac44674dd ("udp: try to avoid 2 cache miss on dequeue")
Fixes: fd851ba9caa9 ("udp: harden copy_linear_skb()")
Signed-off-by: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Sasha Levin <alexander.levin@verizon.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a dst is created by addrconf_dst_alloc() for a host route or an
anycast route, dst->dev points to loopback dev while rt6->rt6i_idev
points to a real device.
When the real device goes down, the current cleanup code only checks for
dst->dev and assumes rt6->rt6i_idev->dev is the same. This causes the
refcount leak on the real device in the above situation.
This patch makes sure to always release the refcount taken on
rt6->rt6i_idev during dst_dev_put().
Fixes: 587fea741134 ("ipv6: mark DST_NOGC and remove the operation of
dst_free()")
Reported-by: John Stultz <john.stultz@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pfkey_broadcast() might be called from non process contexts,
we can not use GFP_KERNEL in these cases [1].
This patch partially reverts commit ba51b6be38c1 ("net: Fix RCU splat in
af_key"), only keeping the GFP_ATOMIC forcing under rcu_read_lock()
section.
[1] : syzkaller reported :
in_atomic(): 1, irqs_disabled(): 0, pid: 2932, name: syzkaller183439
3 locks held by syzkaller183439/2932:
#0: (&net->xfrm.xfrm_cfg_mutex){+.+.+.}, at: [<ffffffff83b43888>] pfkey_sendmsg+0x4c8/0x9f0 net/key/af_key.c:3649
#1: (&pfk->dump_lock){+.+.+.}, at: [<ffffffff83b467f6>] pfkey_do_dump+0x76/0x3f0 net/key/af_key.c:293
#2: (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] spin_lock_bh include/linux/spinlock.h:304 [inline]
#2: (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] xfrm_policy_walk+0x192/0xa30 net/xfrm/xfrm_policy.c:1028
CPU: 0 PID: 2932 Comm: syzkaller183439 Not tainted 4.13.0-rc4+ #24
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
___might_sleep+0x2b2/0x470 kernel/sched/core.c:5994
__might_sleep+0x95/0x190 kernel/sched/core.c:5947
slab_pre_alloc_hook mm/slab.h:416 [inline]
slab_alloc mm/slab.c:3383 [inline]
kmem_cache_alloc+0x24b/0x6e0 mm/slab.c:3559
skb_clone+0x1a0/0x400 net/core/skbuff.c:1037
pfkey_broadcast_one+0x4b2/0x6f0 net/key/af_key.c:207
pfkey_broadcast+0x4ba/0x770 net/key/af_key.c:281
dump_sp+0x3d6/0x500 net/key/af_key.c:2685
xfrm_policy_walk+0x2f1/0xa30 net/xfrm/xfrm_policy.c:1042
pfkey_dump_sp+0x42/0x50 net/key/af_key.c:2695
pfkey_do_dump+0xaa/0x3f0 net/key/af_key.c:299
pfkey_spddump+0x1a0/0x210 net/key/af_key.c:2722
pfkey_process+0x606/0x710 net/key/af_key.c:2814
pfkey_sendmsg+0x4d6/0x9f0 net/key/af_key.c:3650
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:643
___sys_sendmsg+0x755/0x890 net/socket.c:2035
__sys_sendmsg+0xe5/0x210 net/socket.c:2069
SYSC_sendmsg net/socket.c:2080 [inline]
SyS_sendmsg+0x2d/0x50 net/socket.c:2076
entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x445d79
RSP: 002b:00007f32447c1dc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000445d79
RDX: 0000000000000000 RSI: 000000002023dfc8 RDI: 0000000000000008
RBP: 0000000000000086 R08: 00007f32447c2700 R09: 00007f32447c2700
R10: 00007f32447c2700 R11: 0000000000000202 R12: 0000000000000000
R13: 00007ffe33edec4f R14: 00007f32447c29c0 R15: 0000000000000000
Fixes: ba51b6be38c1 ("net: Fix RCU splat in af_key")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__tcp_ulp_find_autoload returns tcp_ulp_ops after taking a reference on
the module. Then, if ->init fails, tcp_set_ulp propagates the error but
nothing releases that reference.
Fixes: 734942cc4ea6 ("tcp: ULP infrastructure")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ding Tianhong says:
====================
Add new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
Some devices have problems with Transaction Layer Packets with the Relaxed
Ordering Attribute set. This patch set adds a new PCIe Device Flag,
PCI_DEV_FLAGS_NO_RELAXED_ORDERING, a set of PCI Quirks to catch some known
devices with Relaxed Ordering issues, and a use of this new flag by the
cxgb4 driver to avoid using Relaxed Ordering with problematic Root Complex
Ports.
It's been years since I've submitted kernel.org patches, I appolgise for the
almost certain submission errors.
v2: Alexander point out that the v1 was only a part of the whole solution,
some platform which has some issues could use the new flag to indicate
that it is not safe to enable relaxed ordering attribute, then we need
to clear the relaxed ordering enable bits in the PCI configuration when
initializing the device. So add a new second patch to modify the PCI
initialization code to clear the relaxed ordering enable bit in the
event that the root complex doesn't want relaxed ordering enabled.
The third patch was base on the v1's second patch and only be changed
to query the relaxed ordering enable bit in the PCI configuration space
to allow the Chelsio NIC to send TLPs with the relaxed ordering attributes
set.
This version didn't plan to drop the defines for Intel Drivers to use the
new checking way to enable relaxed ordering because it is not the hardest
part of the moment, we could fix it in next patchset when this patches
reach the goal.
v3: Redesigned the logic for pci_configure_relaxed_ordering when configuration,
If a PCIe device didn't enable the relaxed ordering attribute default,
we should not do anything in the PCIe configuration, otherwise we
should check if any of the devices above us do not support relaxed
ordering by the PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag, then base on
the result if we get a return that indicate that the relaxed ordering
is not supported we should update our device to disable relaxed ordering
in configuration space. If the device above us doesn't exist or isn't
the PCIe device, we shouldn't do anything and skip updating relaxed ordering
because we are probably running in a guest.
v4: Rename the functions pcie_get_relaxed_ordering and pcie_disable_relaxed_ordering
according John's suggestion, and modify the description, use the true/false
as the return value.
We shouldn't enable relaxed ordering attribute by the setting in the root
complex configuration space for PCIe device, so fix it for cxgb4.
Fix some format issues.
v5: Removed the unnecessary code for some function which only return the bool
value, and add the check for VF device.
Make this patch set base on 4.12-rc5.
v6: Fix the logic error in the need to enable the relaxed ordering attribute for cxgb4.
v7: The cxgb4 drivers will enable the PCIe Capability Device Control[Relaxed
Ordering Enable] in PCI Probe() routine, this will break our current
solution for some platform which has problematic when enable the relaxed
ordering attribute. According to the latest recommendations, remove the
enable_pcie_relaxed_ordering(), although it could not cover the Peer-to-Peer
scene, but we agree to leave this problem until we really trigger it.
Make this patch set base on 4.12 release version.
v8: Change the second patch title and description to make it more reasonable,
add the acked-by from Alex and Ashok.
Add a new patch to enable the Relaxed Ordering Attribute for cxgb4vf driver.
Make this patch set base on 4.13-rc2.
v9: The document (https://software.intel.com/sites/default/files/managed/9e/
bc/64-ia-32-architectures-optimization-manual.pdf) indicate that the Xeon
processors based on Broadwell/Haswell microarchitecture has the problem
with Relaxed Ordering Attribute enabled, so add the whole list Device ID
from Intel to the patch.
v10: Significant rework based on Bjorn's feedback, reorganize the first 2 patches,
now the Intel and AMD erratum soc has been divided to the different patches,
rename the pcie_relaxed_ordering_supported() to pcie_relaxed_ordering_enabled(),
and no need to check every intervening switch except the root ports, update
some commits.
v11: We shouldn't let the Intel engineer to acked the AMD's erratum patch, fix the
funny mistake.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cxgb4vf Ethernet driver now queries PCIe configuration space to
determine if it can send TLPs to it with the Relaxed Ordering
Attribute set, just like the pf did.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Reviewed-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cxgb4 Ethernet driver now queries PCIe configuration space to determine
if it can send TLPs to it with the Relaxed Ordering Attribute set.
Remove the enable_pcie_relaxed_ordering() to avoid enable PCIe Capability
Device Control[Relaxed Ordering Enable] at probe routine, to make sure
the driver will not send the Relaxed Ordering TLPs to the Root Complex which
could not deal the Relaxed Ordering TLPs.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Reviewed-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Casey reported that the AMD ARM A1100 SoC has a bug in its PCIe
Root Port where Upstream Transaction Layer Packets with the Relaxed
Ordering Attribute clear are allowed to bypass earlier TLPs with
Relaxed Ordering set, it would cause Data Corruption, so we need
to disable Relaxed Ordering Attribute when Upstream TLPs to the
Root Port.
Reported-and-suggested-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Acked-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to the Intel spec section 3.9.1 said:
3.9.1 Optimizing PCIe Performance for Accesses Toward Coherent Memory
and Toward MMIO Regions (P2P)
In order to maximize performance for PCIe devices in the processors
listed in Table 3-6 below, the soft- ware should determine whether the
accesses are toward coherent memory (system memory) or toward MMIO
regions (P2P access to other devices). If the access is toward MMIO
region, then software can command HW to set the RO bit in the TLP
header, as this would allow hardware to achieve maximum throughput for
these types of accesses. For accesses toward coherent memory, software
can command HW to clear the RO bit in the TLP header (no RO), as this
would allow hardware to achieve maximum throughput for these types of
accesses.
Table 3-6. Intel Processor CPU RP Device IDs for Processors Optimizing
PCIe Performance
Processor CPU RP Device IDs
Intel Xeon processors based on 6F01H-6F0EH
Broadwell microarchitecture
Intel Xeon processors based on 2F01H-2F0EH
Haswell microarchitecture
It means some Intel processors has performance issue when use the Relaxed
Ordering Attribute, so disable Relaxed Ordering for these root port.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When bit4 is set in the PCIe Device Control register, it indicates
whether the device is permitted to use relaxed ordering.
On some platforms using relaxed ordering can have performance issues or
due to erratum can cause data-corruption. In such cases devices must avoid
using relaxed ordering.
The patch adds a new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING to indicate that
Relaxed Ordering (RO) attribute should not be used for Transaction Layer
Packets (TLP) targeted towards these affected root complexes.
This patch checks if there is any node in the hierarchy that indicates that
using relaxed ordering is not safe. In such cases the patch turns off the
relaxed ordering by clearing the capability for this device.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Acked-by: Ashok Raj <ashok.raj@intel.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add 2 new IDs (ELAN0609 and ELAN060B) to the list of ACPI IDs that should
be handled by the driver.
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Similar to commit 722c5ac708b4f ("Input: elan_i2c - add ELAN0605 to the
ACPI table"), ELAN0608 should be handled by elan_i2c.
This touchpad can be found in Lenovo ideapad 320-14IKB.
BugLink: https://bugs.launchpad.net/bugs/1708852
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Guest i915 full ppgtt functionality was blocking by an issue, which would
lead to gpu hardware hang. Guest i915 driver may update the ppgtt table
just before this workload is going to be submitted to the hardware by
device model. This case wasn't handled well by device model before, due
to the small time window between removing old ppgtt entry and adding the
new one. Errors occur when the workload is executed by hardware during
that small time window. This patch is to remove this time window by adding
the new ppgtt entry first and then remove the old one.
Changes in v2:
- Move VGT_CAPS_FULL_PPGTT introduction to patch 2/4. (Joonas)
Changes since v2:
- Divide the whole patch set into two separate patch series, with one
patch in i915 side to check guest i915 full ppgtt capability and enable
it when this capability is supported by the device model, and the other
one in gvt side which fixs the blocking issue and enables the device
model to provide the capability to guest. And this patch focuses on gvt
side. (Joonas)
- Change the title from "reorder the shadow ppgtt update process by adding
entry first" to "Fix guest i915 full ppgtt blocking issue". (Tina)
Changes since v3:
- Rebase to the latest branch.
Changes since v4:
- Tested by Tina Zhang.
Changes since v5:
- Rebase to the latest branch.
v6:
- Update full 48bit ppgtt definition
Cc: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Enable the guest i915 full ppgtt functionality when host can provide this
capability. vgt_caps is introduced to guest i915 driver to get the vgpu
capabilities from the device model. VGT_CPAS_FULL_PPGTT is one of the
capabilities type to let guest i915 dirver know that the guest i915 full
ppgtt is supported by device model.
Notice that the minor version of pvinfo isn't bumped because of this
vgt_caps introduction, due to older guest would be broken by simply
increasing the pvinfo version. Although the pvinfo minor version doesn't
increase, the compatibility won't be blocked. The compatibility is ensured
by checking the value of caps field in pvinfo. Zero means no full ppgtt
support and BIT(2) means this feature is provided.
Changes since v1:
- Use u32 instead of uint32_t (Joonas)
- Move VGT_CAPS_FULL_PPGTT introduction to this patch and use #define
instead of enum (Joonas)
- Rewrite the vgpu full ppgtt capability checking logic. (Joonas)
- Some coding style refine. (Joonas)
Changes since v2:
- Divide the whole patch set into two separate patch series, with one
patch in i915 side to check guest i915 full ppgtt capability and enable
it when this capability is supported by the device model, and the other
one in gvt side which fixs the blocking issue and enables the device
model to provide the capability to guest. And this patch focuses on guest
i915 side. (Joonas)
- Change the title from "introduce vgt_caps to pvinfo" to
"Enable guest i915 full ppgtt functionality". (Tina)
Change since v3:
- Add some comments about pvinfo caps and version. (Joonas)
Change since v4:
- Tested by Tina Zhang.
Change since v5:
- Add limitation about supporting 32bit full ppgtt.
Change since v6:
- Change the fallback to 48bit full ppgtt if i915.ppgtt_enable=2. (Zhenyu)
Change in v9:
- Remove the fixme comment due to no plan for 32bit full ppgtt
support. (Zhenyu)
- Reorder the patch-set to fix compiling issue with git-bisect. (Zhenyu)
- Add print log when forcing guest 48bit full ppgtt. (Zhenyu)
v10:
- Update against Joonas's has_full_ppgtt and has_full_48bit_ppgtt disconnect
change. (Zhenyu)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> # in v2
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Configurations like virtualized environments may support only 48 bit
ppGTT without supporting 32 bit ppGTT. Support this by disconnecting
the relationship of the two feature bits.
Cc: Tina Zhang <tina.zhang@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
This patch fixes the following checkpatch.pl error:
ERROR: space required before the open brace '{'
in rf69.c file as requested by TODO file.
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes the following checkpatch.pl error:
ERROR: else should follow close brace '}'
in rf69.c file as requested by TODO file.
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes the following checkpatch.pl error:
ERROR: that open brace { should be on the previous line
in rf69.c file as requested by TODO file.
Note:
ERROR: else should follow close brace '}'
remains valid here and is going to be fixed by the next patch in set.
Additionally some style warnings remain valid here and could be fixed by
another patch.
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch is intended to fix coding style issues in order to comply
with kernel coding style guide as requested by TODO file.
It fixes the following checkpatch.pl error:
ERROR: "foo * bar" should be "foo *bar"
Note:
"WARNING: line over 80 characters" remains valid here and could be fixed
by another patch.
Signed-off-by: Marcin Ciupak <marcin.s.ciupak@gmail.com>
Reviewed-by: Marcus Wolf <linux@wolf-entwicklungen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Putting a 900 byte array on the stack is a clearly too much in the
kernel, and sometimes results in warnings like:
drivers/staging/pi433/pi433_if.c: In function 'pi433_tx_thread':
drivers/staging/pi433/pi433_if.c:645:1: error: the frame size of 1028 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
This moves the buffer into the dynamically allocated per-device
structure.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Marcus Wolf <linux@wolf-entwicklungen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes the following four warnings found using sparse:
drivers/staging/pi433/pi433_if.c:211:9: warning: mixing different enum types
drivers/staging/pi433/pi433_if.c:211:9: int enum optionOnOff versus
drivers/staging/pi433/pi433_if.c:211:9: int enum packetFormat
drivers/staging/pi433/pi433_if.c:211:9: warning: mixing different enum types
drivers/staging/pi433/pi433_if.c:211:9: int enum optionOnOff versus
drivers/staging/pi433/pi433_if.c:211:9: int enum packetFormat
drivers/staging/pi433/pi433_if.c:268:9: warning: mixing different enum types
drivers/staging/pi433/pi433_if.c:268:9: int enum optionOnOff versus
drivers/staging/pi433/pi433_if.c:268:9: int enum packetFormat
drivers/staging/pi433/pi433_if.c:268:9: warning: mixing different enum types
drivers/staging/pi433/pi433_if.c:268:9: int enum optionOnOff versus
drivers/staging/pi433/pi433_if.c:268:9: int enum packetFormat
This is done calling the rf69_set_packet_format function using the
appropriate enum for the packetFormat argument.
Signed-off-by: Elia Geretto <elia.f.geretto@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver makes use of GENERIC_MSI_IRQ_DOMAIN which requires arch
support so, on architectures that don't have it, the kernel will fail
to build. Add explicit dependency on architectures that were
compile-tested, thus fixing compilation for the ones that don't
implement GENERIC_MSI_IRQ_DOMAIN.
Fixes: 03274850279c ("staging: fsl-mc: allow the driver compile multi-arch")
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use resource_size() function on resource objects instead of
explicit computation.
This patch fixes the following coccinelle warning:
drivers/staging/fsl-mc/bus/dprc-driver.c:620:35-38: ERROR: Missing
resource_size with mc_dev -> regions
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This gets the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
