summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-12-12Merge tag 'for-net-2024-12-12' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - SCO: Fix transparent voice setting - ISO: Locking fixes - hci_core: Fix sleeping function called from invalid context - hci_event: Fix using rcu_read_(un)lock while iterating - btmtk: avoid UAF in btmtk_process_coredump * tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: btmtk: avoid UAF in btmtk_process_coredump Bluetooth: iso: Fix circular lock in iso_conn_big_sync Bluetooth: iso: Fix circular lock in iso_listen_bis Bluetooth: SCO: Add support for 16 bits transparent voice setting Bluetooth: iso: Fix recursive locking warning Bluetooth: iso: Always release hdev at the end of iso_listen_bis Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating Bluetooth: hci_core: Fix sleeping function called from invalid context Bluetooth: Improve setsockopt() handling of malformed user input ==================== Link: https://patch.msgid.link/20241212142806.2046274-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-12net: dsa: tag_ocelot_8021q: fix broken receptionRobert Hodaszi
The blamed commit changed the dsa_8021q_rcv() calling convention to accept pre-populated source_port and switch_id arguments. If those are not available, as in the case of tag_ocelot_8021q, the arguments must be pre-initialized with -1. Due to the bug of passing uninitialized arguments in tag_ocelot_8021q, dsa_8021q_rcv() does not detect that it needs to populate the source_port and switch_id, and this makes dsa_conduit_find_user() fail, which leads to packet loss on reception. Fixes: dcfe7673787b ("net: dsa: tag_sja1105: absorb logic for not overwriting precise info into dsa_8021q_rcv()") Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241211144741.1415758-1-robert.hodaszi@digi.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-12net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundariesJesse Van Gavere
Commit 8d7ae22ae9f8 ("net: dsa: microchip: KSZ9477 register regmap alignment to 32 bit boundaries") fixed an issue whereby regmap_reg_range did not allow writes as 32 bit words to KSZ9477 PHY registers, this fix for KSZ9896 is adapted from there as the same errata is present in KSZ9896C as "Module 5: Certain PHY registers must be written as pairs instead of singly" the explanation below is likewise taken from this commit. The commit provided code to apply "Module 6: Certain PHY registers must be written as pairs instead of singly" errata for KSZ9477 as this chip for certain PHY registers (0xN120 to 0xN13F, N=1,2,3,4,5) must be accessed as 32 bit words instead of 16 or 8 bit access. Otherwise, adjacent registers (no matter if reserved or not) are overwritten with 0x0. Without this patch some registers (e.g. 0x113c or 0x1134) required for 32 bit access are out of valid regmap ranges. As a result, following error is observed and KSZ9896 is not properly configured: ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0 The solution is to modify regmap_reg_range to allow accesses with 4 bytes boundaries. Fixes: 5c844d57aa78 ("net: dsa: microchip: fix writes to phy registers >= 0x10") Signed-off-by: Jesse Van Gavere <jesse.vangavere@scioteq.com> Link: https://patch.msgid.link/20241211092932.26881-1-jesse.vangavere@scioteq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-12net: renesas: rswitch: fix initial MPIC register settingNikita Yushchenko
MPIC.PIS must be set per phy interface type. MPIC.LSC must be set per speed. Do that strictly per datasheet, instead of hardcoding MPIC.PIS to GMII. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20241211053012.368914-1-nikita.yoush@cogentembedded.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-12Bluetooth: btmtk: avoid UAF in btmtk_process_coredumpThadeu Lima de Souza Cascardo
hci_devcd_append may lead to the release of the skb, so it cannot be accessed once it is called. ================================================================== BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk] Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82 CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024 Workqueue: events btusb_rx_work [btusb] Call Trace: <TASK> dump_stack_lvl+0xfd/0x150 print_report+0x131/0x780 kasan_report+0x177/0x1c0 btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01] btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec] btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30 </TASK> Allocated by task 82: stack_trace_save+0xdc/0x190 kasan_set_track+0x4e/0x80 __kasan_slab_alloc+0x4e/0x60 kmem_cache_alloc+0x19f/0x360 skb_clone+0x132/0xf70 btusb_recv_acl_mtk+0x104/0x1a0 [btusb] btusb_rx_work+0x9e/0xe0 [btusb] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30 Freed by task 1733: stack_trace_save+0xdc/0x190 kasan_set_track+0x4e/0x80 kasan_save_free_info+0x28/0xb0 ____kasan_slab_free+0xfd/0x170 kmem_cache_free+0x183/0x3f0 hci_devcd_rx+0x91a/0x2060 [bluetooth] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30 The buggy address belongs to the object at ffff888033cfab40 which belongs to the cache skbuff_head_cache of size 232 The buggy address is located 112 bytes inside of freed 232-byte region [ffff888033cfab40, ffff888033cfac28) The buggy address belongs to the physical page: page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0 anon flags: 0x4000000000000840(slab|head|zone=1) page_type: 0xffffffff() raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001 raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb >ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Check if we need to call hci_devcd_complete before calling hci_devcd_append. That requires that we check data->cd_info.cnt >= MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we increment data->cd_info.cnt only once the call to hci_devcd_append succeeds. Fixes: 0b7015132878 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-12-12Bluetooth: iso: Fix circular lock in iso_conn_big_syncIulia Tanasescu
This fixes the circular locking dependency warning below, by reworking iso_sock_recvmsg, to ensure that the socket lock is always released before calling a function that locks hdev. [ 561.670344] ====================================================== [ 561.670346] WARNING: possible circular locking dependency detected [ 561.670349] 6.12.0-rc6+ #26 Not tainted [ 561.670351] ------------------------------------------------------ [ 561.670353] iso-tester/3289 is trying to acquire lock: [ 561.670355] ffff88811f600078 (&hdev->lock){+.+.}-{3:3}, at: iso_conn_big_sync+0x73/0x260 [bluetooth] [ 561.670405] but task is already holding lock: [ 561.670407] ffff88815af58258 (sk_lock-AF_BLUETOOTH){+.+.}-{0:0}, at: iso_sock_recvmsg+0xbf/0x500 [bluetooth] [ 561.670450] which lock already depends on the new lock. [ 561.670452] the existing dependency chain (in reverse order) is: [ 561.670453] -> #2 (sk_lock-AF_BLUETOOTH){+.+.}-{0:0}: [ 561.670458] lock_acquire+0x7c/0xc0 [ 561.670463] lock_sock_nested+0x3b/0xf0 [ 561.670467] bt_accept_dequeue+0x1a5/0x4d0 [bluetooth] [ 561.670510] iso_sock_accept+0x271/0x830 [bluetooth] [ 561.670547] do_accept+0x3dd/0x610 [ 561.670550] __sys_accept4+0xd8/0x170 [ 561.670553] __x64_sys_accept+0x74/0xc0 [ 561.670556] x64_sys_call+0x17d6/0x25f0 [ 561.670559] do_syscall_64+0x87/0x150 [ 561.670563] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 561.670567] -> #1 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: [ 561.670571] lock_acquire+0x7c/0xc0 [ 561.670574] lock_sock_nested+0x3b/0xf0 [ 561.670577] iso_sock_listen+0x2de/0xf30 [bluetooth] [ 561.670617] __sys_listen_socket+0xef/0x130 [ 561.670620] __x64_sys_listen+0xe1/0x190 [ 561.670623] x64_sys_call+0x2517/0x25f0 [ 561.670626] do_syscall_64+0x87/0x150 [ 561.670629] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 561.670632] -> #0 (&hdev->lock){+.+.}-{3:3}: [ 561.670636] __lock_acquire+0x32ad/0x6ab0 [ 561.670639] lock_acquire.part.0+0x118/0x360 [ 561.670642] lock_acquire+0x7c/0xc0 [ 561.670644] __mutex_lock+0x18d/0x12f0 [ 561.670647] mutex_lock_nested+0x1b/0x30 [ 561.670651] iso_conn_big_sync+0x73/0x260 [bluetooth] [ 561.670687] iso_sock_recvmsg+0x3e9/0x500 [bluetooth] [ 561.670722] sock_recvmsg+0x1d5/0x240 [ 561.670725] sock_read_iter+0x27d/0x470 [ 561.670727] vfs_read+0x9a0/0xd30 [ 561.670731] ksys_read+0x1a8/0x250 [ 561.670733] __x64_sys_read+0x72/0xc0 [ 561.670736] x64_sys_call+0x1b12/0x25f0 [ 561.670738] do_syscall_64+0x87/0x150 [ 561.670741] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 561.670744] other info that might help us debug this: [ 561.670745] Chain exists of: &hdev->lock --> sk_lock-AF_BLUETOOTH-BTPROTO_ISO --> sk_lock-AF_BLUETOOTH [ 561.670751] Possible unsafe locking scenario: [ 561.670753] CPU0 CPU1 [ 561.670754] ---- ---- [ 561.670756] lock(sk_lock-AF_BLUETOOTH); [ 561.670758] lock(sk_lock AF_BLUETOOTH-BTPROTO_ISO); [ 561.670761] lock(sk_lock-AF_BLUETOOTH); [ 561.670764] lock(&hdev->lock); [ 561.670767] *** DEADLOCK *** Fixes: 07a9342b94a9 ("Bluetooth: ISO: Send BIG Create Sync via hci_sync") Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-12-12Bluetooth: iso: Fix circular lock in iso_listen_bisIulia Tanasescu
This fixes the circular locking dependency warning below, by releasing the socket lock before enterning iso_listen_bis, to avoid any potential deadlock with hdev lock. [ 75.307983] ====================================================== [ 75.307984] WARNING: possible circular locking dependency detected [ 75.307985] 6.12.0-rc6+ #22 Not tainted [ 75.307987] ------------------------------------------------------ [ 75.307987] kworker/u81:2/2623 is trying to acquire lock: [ 75.307988] ffff8fde1769da58 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO) at: iso_connect_cfm+0x253/0x840 [bluetooth] [ 75.308021] but task is already holding lock: [ 75.308022] ffff8fdd61a10078 (&hdev->lock) at: hci_le_per_adv_report_evt+0x47/0x2f0 [bluetooth] [ 75.308053] which lock already depends on the new lock. [ 75.308054] the existing dependency chain (in reverse order) is: [ 75.308055] -> #1 (&hdev->lock){+.+.}-{3:3}: [ 75.308057] __mutex_lock+0xad/0xc50 [ 75.308061] mutex_lock_nested+0x1b/0x30 [ 75.308063] iso_sock_listen+0x143/0x5c0 [bluetooth] [ 75.308085] __sys_listen_socket+0x49/0x60 [ 75.308088] __x64_sys_listen+0x4c/0x90 [ 75.308090] x64_sys_call+0x2517/0x25f0 [ 75.308092] do_syscall_64+0x87/0x150 [ 75.308095] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 75.308098] -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: [ 75.308100] __lock_acquire+0x155e/0x25f0 [ 75.308103] lock_acquire+0xc9/0x300 [ 75.308105] lock_sock_nested+0x32/0x90 [ 75.308107] iso_connect_cfm+0x253/0x840 [bluetooth] [ 75.308128] hci_connect_cfm+0x6c/0x190 [bluetooth] [ 75.308155] hci_le_per_adv_report_evt+0x27b/0x2f0 [bluetooth] [ 75.308180] hci_le_meta_evt+0xe7/0x200 [bluetooth] [ 75.308206] hci_event_packet+0x21f/0x5c0 [bluetooth] [ 75.308230] hci_rx_work+0x3ae/0xb10 [bluetooth] [ 75.308254] process_one_work+0x212/0x740 [ 75.308256] worker_thread+0x1bd/0x3a0 [ 75.308258] kthread+0xe4/0x120 [ 75.308259] ret_from_fork+0x44/0x70 [ 75.308261] ret_from_fork_asm+0x1a/0x30 [ 75.308263] other info that might help us debug this: [ 75.308264] Possible unsafe locking scenario: [ 75.308264] CPU0 CPU1 [ 75.308265] ---- ---- [ 75.308265] lock(&hdev->lock); [ 75.308267] lock(sk_lock- AF_BLUETOOTH-BTPROTO_ISO); [ 75.308268] lock(&hdev->lock); [ 75.308269] lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); [ 75.308270] *** DEADLOCK *** [ 75.308271] 4 locks held by kworker/u81:2/2623: [ 75.308272] #0: ffff8fdd66e52148 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x443/0x740 [ 75.308276] #1: ffffafb488b7fe48 ((work_completion)(&hdev->rx_work)), at: process_one_work+0x1ce/0x740 [ 75.308280] #2: ffff8fdd61a10078 (&hdev->lock){+.+.}-{3:3} at: hci_le_per_adv_report_evt+0x47/0x2f0 [bluetooth] [ 75.308304] #3: ffffffffb6ba4900 (rcu_read_lock){....}-{1:2}, at: hci_connect_cfm+0x29/0x190 [bluetooth] Fixes: 02171da6e86a ("Bluetooth: ISO: Add hcon for listening bis sk") Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-12-12Bluetooth: SCO: Add support for 16 bits transparent voice settingFrédéric Danis
The voice setting is used by sco_connect() or sco_conn_defer_accept() after being set by sco_sock_setsockopt(). The PCM part of the voice setting is used for offload mode through PCM chipset port. This commits add support for mSBC 16 bits offloading, i.e. audio data not transported over HCI. The BCM4349B1 supports 16 bits transparent data on its I2S port. If BT_VOICE_TRANSPARENT is used when accepting a SCO connection, this gives only garbage audio while using BT_VOICE_TRANSPARENT_16BIT gives correct audio. This has been tested with connection to iPhone 14 and Samsung S24. Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option") Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-12-12Bluetooth: iso: Fix recursive locking warningIulia Tanasescu
This updates iso_sock_accept to use nested locking for the parent socket, to avoid lockdep warnings caused because the parent and child sockets are locked by the same thread: [ 41.585683] ============================================ [ 41.585688] WARNING: possible recursive locking detected [ 41.585694] 6.12.0-rc6+ #22 Not tainted [ 41.585701] -------------------------------------------- [ 41.585705] iso-tester/3139 is trying to acquire lock: [ 41.585711] ffff988b29530a58 (sk_lock-AF_BLUETOOTH) at: bt_accept_dequeue+0xe3/0x280 [bluetooth] [ 41.585905] but task is already holding lock: [ 41.585909] ffff988b29533a58 (sk_lock-AF_BLUETOOTH) at: iso_sock_accept+0x61/0x2d0 [bluetooth] [ 41.586064] other info that might help us debug this: [ 41.586069] Possible unsafe locking scenario: [ 41.586072] CPU0 [ 41.586076] ---- [ 41.586079] lock(sk_lock-AF_BLUETOOTH); [ 41.586086] lock(sk_lock-AF_BLUETOOTH); [ 41.586093] *** DEADLOCK *** [ 41.586097] May be due to missing lock nesting notation [ 41.586101] 1 lock held by iso-tester/3139: [ 41.586107] #0: ffff988b29533a58 (sk_lock-AF_BLUETOOTH) at: iso_sock_accept+0x61/0x2d0 [bluetooth] Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-12-12Bluetooth: iso: Always release hdev at the end of iso_listen_bisIulia Tanasescu
Since hci_get_route holds the device before returning, the hdev should be released with hci_dev_put at the end of iso_listen_bis even if the function returns with an error. Fixes: 02171da6e86a ("Bluetooth: ISO: Add hcon for listening bis sk") Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-12-12Bluetooth: hci_event: Fix using rcu_read_(un)lock while iteratingLuiz Augusto von Dentz
The usage of rcu_read_(un)lock while inside list_for_each_entry_rcu is not safe since for the most part entries fetched this way shall be treated as rcu_dereference: Note that the value returned by rcu_dereference() is valid only within the enclosing RCU read-side critical section [1]_. For example, the following is **not** legal:: rcu_read_lock(); p = rcu_dereference(head.next); rcu_read_unlock(); x = p->address; /* BUG!!! */ rcu_read_lock(); y = p->data; /* BUG!!! */ rcu_read_unlock(); Fixes: a0bfde167b50 ("Bluetooth: ISO: Add support for connecting multiple BISes") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-12-12Bluetooth: hci_core: Fix sleeping function called from invalid contextLuiz Augusto von Dentz
This reworks hci_cb_list to not use mutex hci_cb_list_lock to avoid bugs like the bellow: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5070, name: kworker/u9:2 preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 4 locks held by kworker/u9:2/5070: #0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3229 [inline] #0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_scheduled_works+0x8e0/0x1770 kernel/workqueue.c:3335 #1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3230 [inline] #1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_scheduled_works+0x91b/0x1770 kernel/workqueue.c:3335 #2: ffff8880665d0078 (&hdev->lock){+.+.}-{3:3}, at: hci_le_create_big_complete_evt+0xcf/0xae0 net/bluetooth/hci_event.c:6914 #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline] #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline] #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: hci_le_create_big_complete_evt+0xdb/0xae0 net/bluetooth/hci_event.c:6915 CPU: 0 PID: 5070 Comm: kworker/u9:2 Not tainted 6.8.0-syzkaller-08073-g480e035fc4c7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: hci0 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 __might_resched+0x5d4/0x780 kernel/sched/core.c:10187 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0xc1/0xd70 kernel/locking/mutex.c:752 hci_connect_cfm include/net/bluetooth/hci_core.h:2004 [inline] hci_le_create_big_complete_evt+0x3d9/0xae0 net/bluetooth/hci_event.c:6939 hci_event_func net/bluetooth/hci_event.c:7514 [inline] hci_event_packet+0xa53/0x1540 net/bluetooth/hci_event.c:7569 hci_rx_work+0x3e8/0xca0 net/bluetooth/hci_core.c:4171 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa00/0x1770 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f0/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243 </TASK> Reported-by: syzbot+2fb0835e0c9cefc34614@syzkaller.appspotmail.com Tested-by: syzbot+2fb0835e0c9cefc34614@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2fb0835e0c9cefc34614 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-12-12Merge tag 'nf-24-12-11' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix bogus test reports in rpath.sh selftest by adding permanent neighbor entries, from Phil Sutter. 2) Lockdep reports possible ABBA deadlock in xt_IDLETIMER, fix it by removing sysfs out of the mutex section, also from Phil Sutter. 3) It is illegal to release basechain via RCU callback, for several reasons. Keep it simple and safe by calling synchronize_rcu() instead. This is a partially reverting a botched recent attempt of me to fix this basechain release path on netdevice removal. From Florian Westphal. netfilter pull request 24-12-11 * tag 'nf-24-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: do not defer rule destruction via call_rcu netfilter: IDLETIMER: Fix for possible ABBA deadlock selftests: netfilter: Stabilize rpath.sh ==================== Link: https://patch.msgid.link/20241211230130.176937-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-12team: Fix feature propagation of NETIF_F_GSO_ENCAP_ALLDaniel Borkmann
Similar to bonding driver, add NETIF_F_GSO_ENCAP_ALL to TEAM_VLAN_FEATURES in order to support slave devices which propagate NETIF_F_GSO_UDP_TUNNEL & NETIF_F_GSO_UDP_TUNNEL_CSUM as vlan_features. Fixes: 3625920b62c3 ("teaming: fix vlan_features computing") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20241210141245.327886-5-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-12team: Fix initial vlan_feature set in __team_compute_featuresDaniel Borkmann
Similarly as with bonding, fix the calculation of vlan_features to reuse netdev_base_features() in order derive the set in the same way as ndo_fix_features before iterating through the slave devices to refine the feature set. Fixes: 3625920b62c3 ("teaming: fix vlan_features computing") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20241210141245.327886-4-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-12bonding: Fix feature propagation of NETIF_F_GSO_ENCAP_ALLDaniel Borkmann
Drivers like mlx5 expose NIC's vlan_features such as NETIF_F_GSO_UDP_TUNNEL & NETIF_F_GSO_UDP_TUNNEL_CSUM which are later not propagated when the underlying devices are bonded and a vlan device created on top of the bond. Right now, the more cumbersome workaround for this is to create the vlan on top of the mlx5 and then enslave the vlan devices to a bond. To fix this, add NETIF_F_GSO_ENCAP_ALL to BOND_VLAN_FEATURES such that bond_compute_features() can probe and propagate the vlan_features from the slave devices up to the vlan device. Given the following bond: # ethtool -i enp2s0f{0,1}np{0,1} driver: mlx5_core [...] # ethtool -k enp2s0f0np0 | grep udp tx-udp_tnl-segmentation: on tx-udp_tnl-csum-segmentation: on tx-udp-segmentation: on rx-udp_tunnel-port-offload: on rx-udp-gro-forwarding: off # ethtool -k enp2s0f1np1 | grep udp tx-udp_tnl-segmentation: on tx-udp_tnl-csum-segmentation: on tx-udp-segmentation: on rx-udp_tunnel-port-offload: on rx-udp-gro-forwarding: off # ethtool -k bond0 | grep udp tx-udp_tnl-segmentation: on tx-udp_tnl-csum-segmentation: on tx-udp-segmentation: on rx-udp_tunnel-port-offload: off [fixed] rx-udp-gro-forwarding: off Before: # ethtool -k bond0.100 | grep udp tx-udp_tnl-segmentation: off [requested on] tx-udp_tnl-csum-segmentation: off [requested on] tx-udp-segmentation: on rx-udp_tunnel-port-offload: off [fixed] rx-udp-gro-forwarding: off After: # ethtool -k bond0.100 | grep udp tx-udp_tnl-segmentation: on tx-udp_tnl-csum-segmentation: on tx-udp-segmentation: on rx-udp_tunnel-port-offload: off [fixed] rx-udp-gro-forwarding: off Various users have run into this reporting performance issues when configuring Cilium in vxlan tunneling mode and having the combination of bond & vlan for the core devices connecting the Kubernetes cluster to the outside world. Fixes: a9b3ace44c7d ("bonding: fix vlan_features computing") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20241210141245.327886-3-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-12bonding: Fix initial {vlan,mpls}_feature set in bond_compute_featuresDaniel Borkmann
If a bonding device has slave devices, then the current logic to derive the feature set for the master bond device is limited in that flags which are fully supported by the underlying slave devices cannot be propagated up to vlan devices which sit on top of bond devices. Instead, these get blindly masked out via current NETIF_F_ALL_FOR_ALL logic. vlan_features and mpls_features should reuse netdev_base_features() in order derive the set in the same way as ndo_fix_features before iterating through the slave devices to refine the feature set. Fixes: a9b3ace44c7d ("bonding: fix vlan_features computing") Fixes: 2e770b507ccd ("net: bonding: Inherit MPLS features from slave devices") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20241210141245.327886-2-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-12net, team, bonding: Add netdev_base_features helperDaniel Borkmann
Both bonding and team driver have logic to derive the base feature flags before iterating over their slave devices to refine the set via netdev_increment_features(). Add a small helper netdev_base_features() so this can be reused instead of having it open-coded multiple times. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20241210141245.327886-1-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-11net/sched: netem: account for backlog updates from child qdiscMartin Ottens
In general, 'qlen' of any classful qdisc should keep track of the number of packets that the qdisc itself and all of its children holds. In case of netem, 'qlen' only accounts for the packets in its internal tfifo. When netem is used with a child qdisc, the child qdisc can use 'qdisc_tree_reduce_backlog' to inform its parent, netem, about created or dropped SKBs. This function updates 'qlen' and the backlog statistics of netem, but netem does not account for changes made by a child qdisc. 'qlen' then indicates the wrong number of packets in the tfifo. If a child qdisc creates new SKBs during enqueue and informs its parent about this, netem's 'qlen' value is increased. When netem dequeues the newly created SKBs from the child, the 'qlen' in netem is not updated. If 'qlen' reaches the configured sch->limit, the enqueue function stops working, even though the tfifo is not full. Reproduce the bug: Ensure that the sender machine has GSO enabled. Configure netem as root qdisc and tbf as its child on the outgoing interface of the machine as follows: $ tc qdisc add dev <oif> root handle 1: netem delay 100ms limit 100 $ tc qdisc add dev <oif> parent 1:0 tbf rate 50Mbit burst 1542 latency 50ms Send bulk TCP traffic out via this interface, e.g., by running an iPerf3 client on the machine. Check the qdisc statistics: $ tc -s qdisc show dev <oif> Statistics after 10s of iPerf3 TCP test before the fix (note that netem's backlog > limit, netem stopped accepting packets): qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 2767766 bytes 1848 pkt (dropped 652, overlimits 0 requeues 0) backlog 4294528236b 1155p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 2767766 bytes 1848 pkt (dropped 327, overlimits 7601 requeues 0) backlog 0b 0p requeues 0 Statistics after the fix: qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 37766372 bytes 24974 pkt (dropped 9, overlimits 0 requeues 0) backlog 0b 0p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 37766372 bytes 24974 pkt (dropped 327, overlimits 96017 requeues 0) backlog 0b 0p requeues 0 tbf segments the GSO SKBs (tbf_segment) and updates the netem's 'qlen'. The interface fully stops transferring packets and "locks". In this case, the child qdisc and tfifo are empty, but 'qlen' indicates the tfifo is at its limit and no more packets are accepted. This patch adds a counter for the entries in the tfifo. Netem's 'qlen' is only decreased when a packet is returned by its dequeue function, and not during enqueuing into the child qdisc. External updates to 'qlen' are thus accounted for and only the behavior of the backlog statistics changes. As in other qdiscs, 'qlen' then keeps track of how many packets are held in netem and all of its children. As before, sch->limit remains as the maximum number of packets in the tfifo. The same applies to netem's backlog statistics. Fixes: 50612537e9ab ("netem: fix classful handling") Signed-off-by: Martin Ottens <martin.ottens@fau.de> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20241210131412.1837202-1-martin.ottens@fau.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11Merge tag 'batadv-net-pullrequest-20241210' of ↵Jakub Kicinski
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - fix TT unitialized data and size limit issues, by Remi Pommarel (3 patches) * tag 'batadv-net-pullrequest-20241210' of git://git.open-mesh.org/linux-merge: batman-adv: Do not let TT changes list grows indefinitely batman-adv: Remove uninitialized data in full table TT response batman-adv: Do not send uninitialized TT changes ==================== Link: https://patch.msgid.link/20241210135024.39068-1-sw@simonwunderlich.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11net: dsa: felix: fix stuck CPU-injected packets with short taprio windowsVladimir Oltean
With this port schedule: tc qdisc replace dev $send_if parent root handle 100 taprio \ num_tc 8 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ map 0 1 2 3 4 5 6 7 \ base-time 0 cycle-time 10000 \ sched-entry S 01 1250 \ sched-entry S 02 1250 \ sched-entry S 04 1250 \ sched-entry S 08 1250 \ sched-entry S 10 1250 \ sched-entry S 20 1250 \ sched-entry S 40 1250 \ sched-entry S 80 1250 \ flags 2 ptp4l would fail to take TX timestamps of Pdelay_Resp messages like this: increasing tx_timestamp_timeout may correct this issue, but it is likely caused by a driver bug ptp4l[4134.168]: port 2: send peer delay response failed It turns out that the driver can't take their TX timestamps because it can't transmit them in the first place. And there's nothing special about the Pdelay_Resp packets - they're just regular 68 byte packets. But with this taprio configuration, the switch would refuse to send even the ETH_ZLEN minimum packet size. This should have definitely not been the case. When applying the taprio config, the driver prints: mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 132 octets including FCS and thus, everything under 132 bytes - ETH_FCS_LEN should have been sent without problems. Yet it's not. For the forwarding path, the configuration is fine, yet packets injected from Linux get stuck with this schedule no matter what. The first hint that the static guard bands are the cause of the problem is that reverting Michael Walle's commit 297c4de6f780 ("net: dsa: felix: re-enable TAS guard band mode") made things work. It must be that the guard bands are calculated incorrectly. I remembered that there is a magic constant in the driver, set to 33 ns for no logical reason other than experimentation, which says "never let the static guard bands get so large as to leave less than this amount of remaining space in the time slot, because the queue system will refuse to schedule packets otherwise, and they will get stuck". I had a hunch that my previous experimentally-determined value was only good for packets coming from the forwarding path, and that the CPU injection path needed more. I came to the new value of 35 ns through binary search, after seeing that with 544 ns (the bit time required to send the Pdelay_Resp packet at gigabit) it works. Again, this is purely experimental, there's no logic and the manual doesn't say anything. The new driver prints for this schedule look like this: mscc_felix 0000:00:00.5: port 0 tc 0 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 1250 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 131 octets including FCS So yes, the maximum MTU is now even smaller by 1 byte than before. This is maybe counter-intuitive, but makes more sense with a diagram of one time slot. Before: Gate open Gate close | | v 1250 ns total time slot duration v <----------------------------------------------------> <----><----------------------------------------------> 33 ns 1217 ns static guard band useful Gate open Gate close | | v 1250 ns total time slot duration v <----------------------------------------------------> <-----><---------------------------------------------> 35 ns 1215 ns static guard band useful The static guard band implemented by this switch hardware directly determines the maximum allowable MTU for that traffic class. The larger it is, the earlier the switch will stop scheduling frames for transmission, because otherwise they might overrun the gate close time (and avoiding that is the entire purpose of Michael's patch). So, we now have guard bands smaller by 2 ns, thus, in this particular case, we lose a byte of the maximum MTU. Fixes: 11afdc6526de ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Link: https://patch.msgid.link/20241210132640.3426788-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11splice: do not checksum AF_UNIX socketsFrederik Deweerdt
When `skb_splice_from_iter` was introduced, it inadvertently added checksumming for AF_UNIX sockets. This resulted in significant slowdowns, for example when using sendfile over unix sockets. Using the test code in [1] in my test setup (2G single core qemu), the client receives a 1000M file in: - without the patch: 1482ms (+/- 36ms) - with the patch: 652.5ms (+/- 22.9ms) This commit addresses the issue by marking checksumming as unnecessary in `unix_stream_sendmsg` Cc: stable@vger.kernel.org Signed-off-by: Frederik Deweerdt <deweerdt.lkml@gmail.com> Fixes: 2e910b95329c ("net: Add a function to splice pages into an skbuff for MSG_SPLICE_PAGES") Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/Z1fMaHkRf8cfubuE@xiberoa Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11net: usb: qmi_wwan: add Telit FE910C04 compositionsDaniele Palmas
Add the following Telit FE910C04 compositions: 0x10c0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c4: rmnet + tty (AT) + tty (AT) + tty (diag) T: Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c4 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c8: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c8 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://patch.msgid.link/20241209151821.3688829-1-dnlplm@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11Merge branch 'mana-fix-few-memory-leaks-in-mana_gd_setup_irqs'Jakub Kicinski
Maxim Levitsky says: ==================== MANA: Fix few memory leaks in mana_gd_setup_irqs Fix 2 minor memory leaks in the mana driver, introduced by commit ==================== Link: https://patch.msgid.link/20241209175751.287738-1-mlevitsk@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11net: mana: Fix irq_contexts memory leak in mana_gd_setup_irqsMaxim Levitsky
gc->irq_contexts is not freeded if one of the later operations fail. Suggested-by: Michael Kelley <mhklinux@outlook.com> Fixes: 8afefc361209 ("net: mana: Assigning IRQ affinity on HT cores") Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Yury Norov <yury.norov@gmail.com> Link: https://patch.msgid.link/20241209175751.287738-3-mlevitsk@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11net: mana: Fix memory leak in mana_gd_setup_irqsMaxim Levitsky
Commit 8afefc361209 ("net: mana: Assigning IRQ affinity on HT cores") added memory allocation in mana_gd_setup_irqs of 'irqs' but the code doesn't free this temporary array in the success path. This was caught by kmemleak. Fixes: 8afefc361209 ("net: mana: Assigning IRQ affinity on HT cores") Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Yury Norov <yury.norov@gmail.com> Link: https://patch.msgid.link/20241209175751.287738-2-mlevitsk@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11MAINTAINERS: Add ethtool.h to NETWORKING [GENERAL]Simon Horman
This is part of an effort to assign a section in MAINTAINERS to header files related to Networking. In this case the files named ethool.h. Signed-off-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241210-mnt-ethtool-h-v1-1-2a40b567939d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11netfilter: nf_tables: do not defer rule destruction via call_rcuFlorian Westphal
nf_tables_chain_destroy can sleep, it can't be used from call_rcu callbacks. Moreover, nf_tables_rule_release() is only safe for error unwinding, while transaction mutex is held and the to-be-desroyed rule was not exposed to either dataplane or dumps, as it deactives+frees without the required synchronize_rcu() in-between. nft_rule_expr_deactivate() callbacks will change ->use counters of other chains/sets, see e.g. nft_lookup .deactivate callback, these must be serialized via transaction mutex. Also add a few lockdep asserts to make this more explicit. Calling synchronize_rcu() isn't ideal, but fixing this without is hard and way more intrusive. As-is, we can get: WARNING: .. net/netfilter/nf_tables_api.c:5515 nft_set_destroy+0x.. Workqueue: events nf_tables_trans_destroy_work RIP: 0010:nft_set_destroy+0x3fe/0x5c0 Call Trace: <TASK> nf_tables_trans_destroy_work+0x6b7/0xad0 process_one_work+0x64a/0xce0 worker_thread+0x613/0x10d0 In case the synchronize_rcu becomes an issue, we can explore alternatives. One way would be to allocate nft_trans_rule objects + one nft_trans_chain object, deactivate the rules + the chain and then defer the freeing to the nft destroy workqueue. We'd still need to keep the synchronize_rcu path as a fallback to handle -ENOMEM corner cases though. Reported-by: syzbot+b26935466701e56cfdc2@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/67478d92.050a0220.253251.0062.GAE@google.com/T/ Fixes: c03d278fdf35 ("netfilter: nf_tables: wait for rcu grace period on net_device removal") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-12-11netfilter: IDLETIMER: Fix for possible ABBA deadlockPhil Sutter
Deletion of the last rule referencing a given idletimer may happen at the same time as a read of its file in sysfs: | ====================================================== | WARNING: possible circular locking dependency detected | 6.12.0-rc7-01692-g5e9a28f41134-dirty #594 Not tainted | ------------------------------------------------------ | iptables/3303 is trying to acquire lock: | ffff8881057e04b8 (kn->active#48){++++}-{0:0}, at: __kernfs_remove+0x20 | | but task is already holding lock: | ffffffffa0249068 (list_mutex){+.+.}-{3:3}, at: idletimer_tg_destroy_v] | | which lock already depends on the new lock. A simple reproducer is: | #!/bin/bash | | while true; do | iptables -A INPUT -i foo -j IDLETIMER --timeout 10 --label "testme" | iptables -D INPUT -i foo -j IDLETIMER --timeout 10 --label "testme" | done & | while true; do | cat /sys/class/xt_idletimer/timers/testme >/dev/null | done Avoid this by freeing list_mutex right after deleting the element from the list, then continuing with the teardown. Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-12-11selftests: netfilter: Stabilize rpath.shPhil Sutter
On some systems, neighbor discoveries from ns1 for fec0:42::1 (i.e., the martian trap address) would happen at the wrong time and cause false-negative test result. Problem analysis also discovered that IPv6 martian ping test was broken in that sent neighbor discoveries, not echo requests were inadvertently trapped Avoid the race condition by introducing the neighbors to each other upfront. Also pin down the firewall rules to matching on echo requests only. Fixes: efb056e5f1f0 ("netfilter: ip6t_rpfilter: Fix regression with VRF interfaces") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-12-11Bluetooth: Improve setsockopt() handling of malformed user inputMichal Luczaj
The bt_copy_from_sockptr() return value is being misinterpreted by most users: a non-zero result is mistakenly assumed to represent an error code, but actually indicates the number of bytes that could not be copied. Remove bt_copy_from_sockptr() and adapt callers to use copy_safe_from_sockptr(). For sco_sock_setsockopt() (case BT_CODEC) use copy_struct_from_sockptr() to scrub parts of uninitialized buffer. Opportunistically, rename `len` to `optlen` in hci_sock_setsockopt_old() and hci_sock_setsockopt(). Fixes: 51eda36d33e4 ("Bluetooth: SCO: Fix not validating setsockopt user input") Fixes: a97de7bff13b ("Bluetooth: RFCOMM: Fix not validating setsockopt user input") Fixes: 4f3951242ace ("Bluetooth: L2CAP: Fix not validating setsockopt user input") Fixes: 9e8742cdfc4b ("Bluetooth: ISO: Fix not validating setsockopt user input") Fixes: b2186061d604 ("Bluetooth: hci_sock: Fix not validating setsockopt user input") Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Reviewed-by: David Wei <dw@davidwei.uk> Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-12-10net: renesas: rswitch: handle stop vs interrupt raceNikita Yushchenko
Currently the stop routine of rswitch driver does not immediately prevent hardware from continuing to update descriptors and requesting interrupts. It can happen that when rswitch_stop() executes the masking of interrupts from the queues of the port being closed, napi poll for that port is already scheduled or running on a different CPU. When execution of this napi poll completes, it will unmask the interrupts. And unmasked interrupt can fire after rswitch_stop() returns from napi_disable() call. Then, the handler won't mask it, because napi_schedule_prep() will return false, and interrupt storm will happen. This can't be fixed by making rswitch_stop() call napi_disable() before masking interrupts. In this case, the interrupt storm will happen if interrupt fires between napi_disable() and masking. Fix this by checking for priv->opened_ports bit when unmasking interrupts after napi poll. For that to be consistent, move priv->opened_ports changes into spinlock-protected areas, and reorder other operations in rswitch_open() and rswitch_stop() accordingly. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Link: https://patch.msgid.link/20241209113204.175015-1-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10Merge branch 'net-renesas-rswitch-several-fixes'Jakub Kicinski
Nikita Yushchenko says: ==================== net: renesas: rswitch: several fixes This series fixes several glitches found in the rswitch driver. Repost of https://lore.kernel.org/20241206190015.4194153-1-nikita.yoush@cogentembedded.com ==================== Link: https://patch.msgid.link/20241208095004.69468-1-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10net: renesas: rswitch: avoid use-after-put for a device tree nodeNikita Yushchenko
The device tree node saved in the rswitch_device structure is used at several driver locations. So passing this node to of_node_put() after the first use is wrong. Move of_node_put() for this node to exit paths. Fixes: b46f1e579329 ("net: renesas: rswitch: Simplify struct phy * handling") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://patch.msgid.link/20241208095004.69468-5-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10net: renesas: rswitch: fix leaked pointer on error pathNikita Yushchenko
If error path is taken while filling descriptor for a frame, skb pointer is left in the entry. Later, on the ring entry reuse, the same entry could be used as a part of a multi-descriptor frame, and skb for that new frame could be stored in a different entry. Then, the stale pointer will reach the completion routine, and passed to the release operation. Fix that by clearing the saved skb pointer at the error path. Fixes: d2c96b9d5f83 ("net: rswitch: Add jumbo frames handling for TX") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://patch.msgid.link/20241208095004.69468-4-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10net: renesas: rswitch: fix race window between tx start and completeNikita Yushchenko
If hardware is already transmitting, it can start handling the descriptor being written to immediately after it observes updated DT field, before the queue is kicked by a write to GWTRC. If the start_xmit() execution is preempted at unfortunate moment, this transmission can complete, and interrupt handled, before gq->cur gets updated. With the current implementation of completion, this will cause the last entry not completed. Fix that by changing completion loop to check DT values directly, instead of depending on gq->cur. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://patch.msgid.link/20241208095004.69468-3-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10net: renesas: rswitch: fix possible early skb releaseNikita Yushchenko
When sending frame split into multiple descriptors, hardware processes descriptors one by one, including writing back DT values. The first descriptor could be already marked as completed when processing of next descriptors for the same frame is still in progress. Although only the last descriptor is configured to generate interrupt, completion of the first descriptor could be noticed by the driver when handling interrupt for the previous frame. Currently, driver stores skb in the entry that corresponds to the first descriptor. This results into skb could be unmapped and freed when hardware did not complete the send yet. This opens a window for corrupting the data being sent. Fix this by saving skb in the entry that corresponds to the last descriptor used to send the frame. Fixes: d2c96b9d5f83 ("net: rswitch: Add jumbo frames handling for TX") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://patch.msgid.link/20241208095004.69468-2-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10Merge tag 'wireless-2024-12-10' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== A small set of fixes: - avoid CSA warnings during link removal (by changing link bitmap after remove) - fix # of spatial streams initialisation - fix queues getting stuck in some CSA cases and resume failures - fix interface address when switching monitor mode - fix MBSS change flags 32-bit stack corruption - more UBSAN __counted_by "fixes" ... - fix link ID netlink validation * tag 'wireless-2024-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: cfg80211: sme: init n_channels before channels[] access wifi: mac80211: fix station NSS capability initialization order wifi: mac80211: fix vif addr when switching from monitor to station wifi: mac80211: fix a queue stall in certain cases of CSA wifi: mac80211: wake the queues in case of failure in resume wifi: cfg80211: clear link ID from bitmap during link delete after clean up wifi: mac80211: init cnt before accessing elem in ieee80211_copy_mbssid_beacon wifi: mac80211: fix mbss changed flags corruption on 32 bit systems wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-one ==================== Link: https://patch.msgid.link/20241210130145.28618-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10tcp: check space before adding MPTCP SYN optionsMoYuanhao
Ensure there is enough space before adding MPTCP options in tcp_syn_options(). Without this check, 'remaining' could underflow, and causes issues. If there is not enough space, MPTCP should not be used. Signed-off-by: MoYuanhao <moyuanhao3676@163.com> Fixes: cec37a6e41aa ("mptcp: Handle MP_CAPABLE options for outgoing connections") Cc: stable@vger.kernel.org Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> [ Matt: Add Fixes, cc Stable, update Description ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241209-net-mptcp-check-space-syn-v1-1-2da992bb6f74@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10Documentation: networking: Add a caveat to nexthop_compat_mode sysctlPetr Machata
net.ipv4.nexthop_compat_mode was added when nexthop objects were added to provide the view of nexthop objects through the usual lens of the route UAPI. As nexthop objects evolved, the information provided through this lens became incomplete. For example, details of resilient nexthop groups are obviously omitted. Now that 16-bit nexthop group weights are a thing, the 8-bit UAPI cannot convey the >8-bit weight accurately. Instead of inventing workarounds for an obsolete interface, just document the expectations of inaccuracy. Fixes: b72a6a7ab957 ("net: nexthop: Increase weight to u16") Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/b575e32399ccacd09079b2a218255164535123bd.1733740749.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10bnxt_en: Fix aggregation ID mask to prevent oops on 5760X chipsMichael Chan
The 5760X (P7) chip's HW GRO/LRO interface is very similar to that of the previous generation (5750X or P5). However, the aggregation ID fields in the completion structures on P7 have been redefined from 16 bits to 12 bits. The freed up 4 bits are redefined for part of the metadata such as the VLAN ID. The aggregation ID mask was not modified when adding support for P7 chips. Including the extra 4 bits for the aggregation ID can potentially cause the driver to store or fetch the packet header of GRO/LRO packets in the wrong TPA buffer. It may hit the BUG() condition in __skb_pull() because the SKB contains no valid packet header: kernel BUG at include/linux/skbuff.h:2766! Oops: invalid opcode: 0000 1 PREEMPT SMP NOPTI CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Kdump: loaded Tainted: G OE 6.12.0-rc2+ #7 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. PowerEdge R760/0VRV9X, BIOS 1.0.1 12/27/2022 RIP: 0010:eth_type_trans+0xda/0x140 Code: 80 00 00 00 eb c1 8b 47 70 2b 47 74 48 8b 97 d0 00 00 00 83 f8 01 7e 1b 48 85 d2 74 06 66 83 3a ff 74 09 b8 00 04 00 00 eb a5 <0f> 0b b8 00 01 00 00 eb 9c 48 85 ff 74 eb 31 f6 b9 02 00 00 00 48 RSP: 0018:ff615003803fcc28 EFLAGS: 00010283 RAX: 00000000000022d2 RBX: 0000000000000003 RCX: ff2e8c25da334040 RDX: 0000000000000040 RSI: ff2e8c25c1ce8000 RDI: ff2e8c25869f9000 RBP: ff2e8c258c31c000 R08: ff2e8c25da334000 R09: 0000000000000001 R10: ff2e8c25da3342c0 R11: ff2e8c25c1ce89c0 R12: ff2e8c258e0990b0 R13: ff2e8c25bb120000 R14: ff2e8c25c1ce89c0 R15: ff2e8c25869f9000 FS: 0000000000000000(0000) GS:ff2e8c34be300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f05317e4c8 CR3: 000000108bac6006 CR4: 0000000000773ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? eth_type_trans+0xda/0x140 ? do_error_trap+0x65/0x80 ? eth_type_trans+0xda/0x140 ? exc_invalid_op+0x4e/0x70 ? eth_type_trans+0xda/0x140 ? asm_exc_invalid_op+0x16/0x20 ? eth_type_trans+0xda/0x140 bnxt_tpa_end+0x10b/0x6b0 [bnxt_en] ? bnxt_tpa_start+0x195/0x320 [bnxt_en] bnxt_rx_pkt+0x902/0xd90 [bnxt_en] ? __bnxt_tx_int.constprop.0+0x89/0x300 [bnxt_en] ? kmem_cache_free+0x343/0x440 ? __bnxt_tx_int.constprop.0+0x24f/0x300 [bnxt_en] __bnxt_poll_work+0x193/0x370 [bnxt_en] bnxt_poll_p5+0x9a/0x300 [bnxt_en] ? try_to_wake_up+0x209/0x670 __napi_poll+0x29/0x1b0 Fix it by redefining the aggregation ID mask for P5_PLUS chips to be 12 bits. This will work because the maximum aggregation ID is less than 4096 on all P5_PLUS chips. Fixes: 13d2d3d381ee ("bnxt_en: Add new P7 hardware interface definitions") Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241209015448.1937766-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10udp: fix l4 hash after reconnectPaolo Abeni
After the blamed commit below, udp_rehash() is supposed to be called with both local and remote addresses set. Currently that is already the case for IPv6 sockets, but for IPv4 the destination address is updated after rehashing. Address the issue moving the destination address and port initialization before rehashing. Fixes: 1b29a730ef8b ("ipv6/udp: Add 4-tuple hash for connected socket") Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/4761e466ab9f7542c68cdc95f248987d127044d2.1733499715.git.pabeni@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-10Merge branch 'virtio_net-correct-netdev_tx_reset_queue-invocation-points'Paolo Abeni
Koichiro Den says: ==================== virtio_net: correct netdev_tx_reset_queue() invocation points When virtnet_close is followed by virtnet_open, some TX completions can possibly remain unconsumed, until they are finally processed during the first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash [1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call before RX napi enable") was not sufficient to eliminate all BQL crash scenarios for virtio-net. This issue can be reproduced with the latest net-next master by running: `while :; do ip l set DEV down; ip l set DEV up; done` under heavy network TX load from inside the machine. This patch series resolves the issue and also addresses similar existing problems: (a). Drop netdev_tx_reset_queue() from open/close path. This eliminates the BQL crashes due to the problematic open/close path. (b). As a result of (a), netdev_tx_reset_queue() is now explicitly required in freeze/restore path. Add netdev_tx_reset_queue() immediately after free_unused_bufs() invocation. (c). Fix missing resetting in virtnet_tx_resize(). virtnet_tx_resize() has lacked proper resetting since commit c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits"). (d). Fix missing resetting in the XDP_SETUP_XSK_POOL path. Similar to (c), this path lacked proper resetting. Call netdev_tx_reset_queue() when virtqueue_reset() has actually recycled unused buffers. This patch series consists of six commits: [1/6]: Resolves (a) and (b). # also -stable 6.11.y [2/6]: Minor fix to make [4/6] streamlined. [3/6]: Prerequisite for (c). # also -stable 6.11.y [4/6]: Resolves (c) (incl. Prerequisite for (d)) # also -stable 6.11.y [5/6]: Preresuisite for (d). [6/6]: Resolves (d). Changes for v4: - move netdev_tx_reset_queue() out of free_unused_bufs() - submit to net, not net-next Changes for v3: - replace 'flushed' argument with 'recycle_done' Changes for v2: - add tx queue resetting for (b) to (d) above v3: https://lore.kernel.org/all/20241204050724.307544-1-koichiro.den@canonical.com/ v2: https://lore.kernel.org/all/20241203073025.67065-1-koichiro.den@canonical.com/ v1: https://lore.kernel.org/all/20241130181744.3772632-1-koichiro.den@canonical.com/ [1]: ------------[ cut here ]------------ kernel BUG at lib/dynamic_queue_limits.c:99! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2 Tainted: [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \ BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:dql_completed+0x26b/0x290 Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d 4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01 d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009 RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000 RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001 R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40 FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: <IRQ> ? die+0x32/0x80 ? do_trap+0xd9/0x100 ? dql_completed+0x26b/0x290 ? dql_completed+0x26b/0x290 ? do_error_trap+0x6d/0xb0 ? dql_completed+0x26b/0x290 ? exc_invalid_op+0x4c/0x60 ? dql_completed+0x26b/0x290 ? asm_exc_invalid_op+0x16/0x20 ? dql_completed+0x26b/0x290 __free_old_xmit+0xff/0x170 [virtio_net] free_old_xmit+0x54/0xc0 [virtio_net] virtnet_poll+0xf4/0xe30 [virtio_net] ? __update_load_avg_cfs_rq+0x264/0x2d0 ? update_curr+0x35/0x260 ? reweight_entity+0x1be/0x260 __napi_poll.constprop.0+0x28/0x1c0 net_rx_action+0x329/0x420 ? enqueue_hrtimer+0x35/0x90 ? trace_hardirqs_on+0x1d/0x80 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xd/0x1a0 handle_softirqs+0x138/0x3e0 do_softirq.part.0+0x89/0xc0 </IRQ> <TASK> __local_bh_enable_ip+0xa7/0xb0 virtnet_open+0xc8/0x310 [virtio_net] __dev_open+0xfa/0x1b0 __dev_change_flags+0x1de/0x250 dev_change_flags+0x22/0x60 do_setlink.isra.0+0x2df/0x10b0 ? rtnetlink_rcv_msg+0x34f/0x3f0 ? netlink_rcv_skb+0x54/0x100 ? netlink_unicast+0x23e/0x390 ? netlink_sendmsg+0x21e/0x490 ? ____sys_sendmsg+0x31b/0x350 ? avc_has_perm_noaudit+0x67/0xf0 ? cred_has_capability.isra.0+0x75/0x110 ? __nla_validate_parse+0x5f/0xee0 ? __pfx___probestub_irq_enable+0x3/0x10 ? __create_object+0x5e/0x90 ? security_capable+0x3b/0x70 rtnl_newlink+0x784/0xaf0 ? avc_has_perm_noaudit+0x67/0xf0 ? cred_has_capability.isra.0+0x75/0x110 ? stack_depot_save_flags+0x24/0x6d0 ? __pfx_rtnl_newlink+0x10/0x10 rtnetlink_rcv_msg+0x34f/0x3f0 ? do_syscall_64+0x6c/0x180 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 netlink_unicast+0x23e/0x390 netlink_sendmsg+0x21e/0x490 ____sys_sendmsg+0x31b/0x350 ? copy_msghdr_from_user+0x6d/0xa0 ___sys_sendmsg+0x86/0xd0 ? __pte_offset_map+0x17/0x160 ? preempt_count_add+0x69/0xa0 ? __call_rcu_common.constprop.0+0x147/0x610 ? preempt_count_add+0x69/0xa0 ? preempt_count_add+0x69/0xa0 ? _raw_spin_trylock+0x13/0x60 ? trace_hardirqs_on+0x1d/0x80 __sys_sendmsg+0x66/0xc0 do_syscall_64+0x6c/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f41defe5b34 Code: 15 e1 12 0f 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00 f3 0f 1e fa 80 3d 35 95 0f 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55 RSP: 002b:00007ffe5336ecc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f41defe5b34 RDX: 0000000000000000 RSI: 00007ffe5336ed30 RDI: 0000000000000003 RBP: 00007ffe5336eda0 R08: 0000000000000010 R09: 0000000000000001 R10: 00007ffe5336f6f9 R11: 0000000000000202 R12: 0000000000000003 R13: 0000000067452259 R14: 0000556ccc28b040 R15: 0000000000000000 </TASK> [...] ==================== Link: https://patch.msgid.link/20241206011047.923923-1-koichiro.den@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-10virtio_net: ensure netdev_tx_reset_queue is called on bind xsk for txKoichiro Den
virtnet_sq_bind_xsk_pool() flushes tx skbs and then resets tx queue, so DQL counters need to be reset when flushing has actually occurred, Add virtnet_sq_free_unused_buf_done() as a callback for virtqueue_resize() to handle this. Fixes: 21a4e3ce6dc7 ("virtio_net: xsk: bind/unbind xsk for tx") Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-10virtio_ring: add a func argument 'recycle_done' to virtqueue_reset()Koichiro Den
When virtqueue_reset() has actually recycled all unused buffers, additional work may be required in some cases. Relying solely on its return status is fragile, so introduce a new function argument 'recycle_done', which is invoked when it really occurs. Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-10virtio_net: ensure netdev_tx_reset_queue is called on tx ring resizeKoichiro Den
virtnet_tx_resize() flushes remaining tx skbs, requiring DQL counters to be reset when flushing has actually occurred. Add virtnet_sq_free_unused_buf_done() as a callback for virtqueue_reset() to handle this. Fixes: c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits") Cc: <stable@vger.kernel.org> # v6.11+ Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-10virtio_ring: add a func argument 'recycle_done' to virtqueue_resize()Koichiro Den
When virtqueue_resize() has actually recycled all unused buffers, additional work may be required in some cases. Relying solely on its return status is fragile, so introduce a new function argument 'recycle_done', which is invoked when the recycle really occurs. Cc: <stable@vger.kernel.org> # v6.11+ Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-10virtio_net: replace vq2rxq with vq2txq where appropriateKoichiro Den
While not harmful, using vq2rxq where it's always sq appears odd. Replace it with the more appropriate vq2txq for clarity and correctness. Fixes: 89f86675cb03 ("virtio_net: xsk: tx: support xmit xsk buffer") Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-10virtio_net: correct netdev_tx_reset_queue() invocation pointKoichiro Den
When virtnet_close is followed by virtnet_open, some TX completions can possibly remain unconsumed, until they are finally processed during the first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash [1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call before RX napi enable") was not sufficient to eliminate all BQL crash cases for virtio-net. This issue can be reproduced with the latest net-next master by running: `while :; do ip l set DEV down; ip l set DEV up; done` under heavy network TX load from inside the machine. netdev_tx_reset_queue() can actually be dropped from virtnet_open path; the device is not stopped in any case. For BQL core part, it's just like traffic nearly ceases to exist for some period. For stall detector added to BQL, even if virtnet_close could somehow lead to some TX completions delayed for long, followed by virtnet_open, we can just take it as stall as mentioned in commit 6025b9135f7a ("net: dqs: add NIC stall detector based on BQL"). Note also that users can still reset stall_max via sysfs. So, drop netdev_tx_reset_queue() from virtnet_enable_queue_pair(). This eliminates the BQL crashes. As a result, netdev_tx_reset_queue() is now explicitly required in freeze/restore path. This patch adds it to immediately after free_unused_bufs(), following the rule of thumb: netdev_tx_reset_queue() should follow any SKB freeing not followed by netdev_tx_completed_queue(). This seems the most consistent and streamlined approach, and now netdev_tx_reset_queue() runs whenever free_unused_bufs() is done. [1]: ------------[ cut here ]------------ kernel BUG at lib/dynamic_queue_limits.c:99! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2 Tainted: [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \ BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:dql_completed+0x26b/0x290 Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d 4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01 d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009 RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000 RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001 R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40 FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: <IRQ> ? die+0x32/0x80 ? do_trap+0xd9/0x100 ? dql_completed+0x26b/0x290 ? dql_completed+0x26b/0x290 ? do_error_trap+0x6d/0xb0 ? dql_completed+0x26b/0x290 ? exc_invalid_op+0x4c/0x60 ? dql_completed+0x26b/0x290 ? asm_exc_invalid_op+0x16/0x20 ? dql_completed+0x26b/0x290 __free_old_xmit+0xff/0x170 [virtio_net] free_old_xmit+0x54/0xc0 [virtio_net] virtnet_poll+0xf4/0xe30 [virtio_net] ? __update_load_avg_cfs_rq+0x264/0x2d0 ? update_curr+0x35/0x260 ? reweight_entity+0x1be/0x260 __napi_poll.constprop.0+0x28/0x1c0 net_rx_action+0x329/0x420 ? enqueue_hrtimer+0x35/0x90 ? trace_hardirqs_on+0x1d/0x80 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xd/0x1a0 handle_softirqs+0x138/0x3e0 do_softirq.part.0+0x89/0xc0 </IRQ> <TASK> __local_bh_enable_ip+0xa7/0xb0 virtnet_open+0xc8/0x310 [virtio_net] __dev_open+0xfa/0x1b0 __dev_change_flags+0x1de/0x250 dev_change_flags+0x22/0x60 do_setlink.isra.0+0x2df/0x10b0 ? rtnetlink_rcv_msg+0x34f/0x3f0 ? netlink_rcv_skb+0x54/0x100 ? netlink_unicast+0x23e/0x390 ? netlink_sendmsg+0x21e/0x490 ? ____sys_sendmsg+0x31b/0x350 ? avc_has_perm_noaudit+0x67/0xf0 ? cred_has_capability.isra.0+0x75/0x110 ? __nla_validate_parse+0x5f/0xee0 ? __pfx___probestub_irq_enable+0x3/0x10 ? __create_object+0x5e/0x90 ? security_capable+0x3b/0x70 rtnl_newlink+0x784/0xaf0 ? avc_has_perm_noaudit+0x67/0xf0 ? cred_has_capability.isra.0+0x75/0x110 ? stack_depot_save_flags+0x24/0x6d0 ? __pfx_rtnl_newlink+0x10/0x10 rtnetlink_rcv_msg+0x34f/0x3f0 ? do_syscall_64+0x6c/0x180 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 netlink_unicast+0x23e/0x390 netlink_sendmsg+0x21e/0x490 ____sys_sendmsg+0x31b/0x350 ? copy_msghdr_from_user+0x6d/0xa0 ___sys_sendmsg+0x86/0xd0 ? __pte_offset_map+0x17/0x160 ? preempt_count_add+0x69/0xa0 ? __call_rcu_common.constprop.0+0x147/0x610 ? preempt_count_add+0x69/0xa0 ? preempt_count_add+0x69/0xa0 ? _raw_spin_trylock+0x13/0x60 ? trace_hardirqs_on+0x1d/0x80 __sys_sendmsg+0x66/0xc0 do_syscall_64+0x6c/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f41defe5b34 Code: 15 e1 12 0f 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00 f3 0f 1e fa 80 3d 35 95 0f 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55 RSP: 002b:00007ffe5336ecc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f41defe5b34 RDX: 0000000000000000 RSI: 00007ffe5336ed30 RDI: 0000000000000003 RBP: 00007ffe5336eda0 R08: 0000000000000010 R09: 0000000000000001 R10: 00007ffe5336f6f9 R11: 0000000000000202 R12: 0000000000000003 R13: 0000000067452259 R14: 0000556ccc28b040 R15: 0000000000000000 </TASK> [...] Fixes: c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits") Cc: <stable@vger.kernel.org> # v6.11+ Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> [ pabeni: trimmed possibly troublesome separator ] Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-10octeontx2-af: Fix installation of PF multicast ruleGeetha sowjanya
Due to target variable is being reassigned in npc_install_flow() function, PF multicast rules are not getting installed. This patch addresses the issue by fixing the "IF" condition checks when rules are installed by AF. Fixes: 6c40ca957fe5 ("octeontx2-pf: Adds TC offload support"). Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241205113435.10601-1-gakula@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-15 05:06:31 +0000