summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-03-01net: systemport: fix software maintained statisticsFlorian Fainelli
Commit 60b4ea1781fd ("net: systemport: log RX buffer allocation and RX/TX DMA failures") added a few software maintained statistics using BCM_SYSPORT_STAT_MIB_RX and BCM_SYSPORT_STAT_MIB_TX. These statistics are read from the hardware MIB counters, such that bcm_sysport_update_mib_counters() was trying to read from a non-existing MIB offset for these counters. Fix this by introducing a special type: BCM_SYSPORT_STAT_SOFT, similar to BCM_SYSPORT_STAT_NETDEV, such that bcm_sysport_get_ethtool_stats will read from the software mib. Fixes: 60b4ea1781fd ("net: systemport: log RX buffer allocation and RX/TX DMA failures") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01net: bcmgenet: fix software maintained statisticsFlorian Fainelli
Commit 44c8bc3ce39f ("net: bcmgenet: log RX buffer allocation and RX/TX dma failures") added a few software maintained statistics using BCMGENET_STAT_MIB_RX and BCMGENET_STAT_MIB_TX. These statistics are read from the hardware MIB counters, such that bcmgenet_update_mib_counters() was trying to read from a non-existing MIB offset for these counters. Fix this by introducing a special type: BCMGENET_STAT_SOFT, similar to BCMGENET_STAT_NETDEV, such that bcmgenet_get_ethtool_stats will read from the software mib. Fixes: 44c8bc3ce39f ("net: bcmgenet: log RX buffer allocation and RX/TX dma failures") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01rxrpc: don't multiply with HZ twiceFlorian Westphal
rxrpc_resend_timeout has an initial value of 4 * HZ; use it as-is. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01rxrpc: terminate retrans loop when sending of skb failsFlorian Westphal
Typo, 'stop' is never set to true. Seems intent is to not attempt to retransmit more packets after sendmsg returns an error. This change is based on code inspection only. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01net/hsr: Fix NULL pointer dereference and refcnt bugs when deleting a HSR ↵Arvid Brodin
interface. To repeat: $ sudo ip link del hsr0 BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff8187f495>] hsr_del_port+0x15/0xa0 etc... Bug description: As part of the hsr master device destruction, hsr_del_port() is called for each of the hsr ports. At each such call, the master device is updated regarding features and mtu. When the master device is freed before the slave interfaces, master will be NULL in hsr_del_port(), which led to a NULL pointer dereference. Additionally, dev_put() was called on the master device itself in hsr_del_port(), causing a refcnt error. A third bug in the same code path was that the rtnl lock was not taken before hsr_del_port() was called as part of hsr_dev_destroy(). The reporter (Nicolas Dichtel) also said: "hsr_netdev_notify() supposes that the port will always be available when the notification is for an hsr interface. It's wrong. For example, netdev_wait_allrefs() may resend NETDEV_UNREGISTER.". As a precaution against this, a check for port == NULL was added in hsr_dev_notify(). Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Fixes: 51f3c605318b056a ("net/hsr: Move slave init to hsr_slave.c.") Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01net: pasemi: Use setup_timer and mod_timerVaishali Thakkar
Use timer API functions setup_timer and mod_timer instead of structure assignments as they are standard way to set the timer and to update the expire field of an active timer respectively. This is done using Coccinelle and semantic patch used for this is as follows: // <smpl> @@ expression x,y,z,a,b; @@ -init_timer (&x); +setup_timer (&x, y, z); +mod_timer (&a, b); -x.function = y; -x.data = z; -x.expires = b; -add_timer(&a); // </smpl> Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01net: stmmac: Use setup_timer and mod_timerVaishali Thakkar
Use timer API functions setup_timer and mod_timer instead of structure assignments as they are standard way to set the timer and to update the expire field of an active timer respectively. This is done using Coccinelle and semantic patch used for this is as follows: // <smpl> @@ expression x,y,z,a,b; @@ -init_timer (&x); +setup_timer (&x, y, z); +mod_timer (&a, b); -x.function = y; -x.data = z; -x.expires = b; -add_timer(&a); // </smpl> Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01net: 8390: axnet_cs: Use setup_timer and mod_timerVaishali Thakkar
Use timer API functions setup_timer and mod_timer instead of structure assignments as they are standard way to set the timer and to update the expire field of an active timer respectively. This is done using Coccinelle and semantic patch used for this is as follows: // <smpl> @@ expression x,y,z,a,b; @@ -init_timer (&x); +setup_timer (&x, y, z); +mod_timer (&a, b); -x.function = y; -x.data = z; -x.expires = b; -add_timer(&a); // </smpl> Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01net: 8390: pcnet_cs: Use setup_timer and mod_timerVaishali Thakkar
Use timer API functions setup_timer and mod_timer instead of structure assignments as they are standard way to set the timer and to update the expire field of an active timer respectively. This is done using Coccinelle and semantic patch used for this is as follows: // <smpl> @@ expression x,y,z,a,b; @@ -init_timer (&x); +setup_timer (&x, y, z); +mod_timer (&a, b); -x.function = y; -x.data = z; -x.expires = b; -add_timer(&a); // </smpl> Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01net: smc91c92_cs: Use setup_timer and mod_timerVaishali Thakkar
Use timer API functions setup_timer and mod_timer instead of structure assignments as they are standard way to set the timer and to update the expire field of an active timer respectively. This is done using Coccinelle and semantic patch used for this is as follows: // <smpl> @@ expression x,y,z,a,b; @@ -init_timer (&x); +setup_timer (&x, y, z); +mod_timer (&a, b); -x.function = y; -x.data = z; -x.expires = b; -add_timer(&a); // </smpl> Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01netxen_nic: Fix trivial typos in commentsYannick Guerrini
Change 'mutliple' to 'multiple' Change 'Firmare' to 'Firmware' Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01qlcnic: Fix trivial typo in commentYannick Guerrini
Change 'Firmare' to 'Firmware' Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01net: ti: cpsw: add hibernation callbacksGrygorii Strashko
Setting a dev_pm_ops suspend/resume pair but not a set of hibernation functions means those pm functions will not be called upon hibernation. Fix this by using SIMPLE_DEV_PM_OPS, which appropriately assigns the suspend and hibernation handlers and move cpsw_suspend/resume calbacks under CONFIG_PM_SLEEP to avoid build warnings. Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01net: davinci_mdio: add hibernation callbacksGrygorii Strashko
Setting a dev_pm_ops suspend_late/resume_early pair but not a set of hibernation functions means those pm functions will not be called upon hibernation. Fix this by using SET_LATE_SYSTEM_SLEEP_PM_OPS, which appropriately assigns the suspend and hibernation handlers and move davinci_mdio_x callbacks under CONFIG_PM_SLEEP to avoid build warnings. Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - pthread_attr_setaffinity_np() feature detection build fixes (Adrian Hunter, Josh Boyer) - Fix probing for PERF_FLAG_FD_CLOEXEC flag (Adrian Hunter) - Fix order of arguments to memcpy_alloc_mem in 'perf bench' (Bruce Merry) - Sparc64 and Aarch64 build and segfault fixes (David Ahern) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-01iwlwifi: mvm: new Alive / error table APIEmmanuel Grumbach
The new API slightly changes the layout of the version of the firmware - prepare for that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: support beacon statistics for BSS clientJohannes Berg
Report the average beacon signal and the number of received beacons as measured by the firmware. Since the firmware just counts, and doesn't reset the counter at all, clear it in the firmware whenever we associate. However, accumulate it over firmware restart. Since clearing the statistics in the firmware will also clear the ones for the radio statistics, add those to the accumulator when cleared. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: don't write to DBGC_OUT_CTRL when stopping the recordingEran Harary
Due to HW bug in the DBGC when driver want to stop the dbg recording it should wait 100us before collecting the data instead of write 0 to DBGC_OUT_CTRL. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: remove deprecated scan API codeLuciano Coelho
The legacy scan API is deprecated and not used anymore with 10 and higher firmware versions. Since we deprecated firmware version 9, we can remove a whole lot of unused code. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: deprecate -9.ucode for 3160 / 7260 / 7265Luciano Coelho
This firmware is not supported anymore. Stop loading this firmware. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: support radio statistics as global surveyJohannes Berg
Export the radio statistics from the statistics v10 API (if the firmware also has the capability to fill these statistics) using the global survey data facility. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: add statistics API version 10Johannes Berg
New firmware versions will report statistics using a new version 10 of the API, instead of the current version 8. Add support for this. This enables getting beacon and radio statistics. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: pcie: apply destination before releasing resetEmmanuel Grumbach
This allows to use the firmware debugging system even when the configuration values are set hard coded in the firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: remove unused function in BT coexEyal Shapira
Cleanup unused code. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: fix BT coex shared antenna activity checkEyal Shapira
The shared antenna should be forbidden to use only if there's high BT activity. Comparing to BT_OFF was effectively causing us to always forbid using the shared antenna for SISO. This leads to degraded performance in scenarios where the shared antenna would have better performance. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: rs: print single stream params via debugfsEyal Shapira
Add this to the info printed when reading rate_scale_table. Useful for debugging. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: rs: avoid ss_force from being reset after tx idleEyal Shapira
ss_force is a debugging option to force a certain single stream tx mode. It's not useful if it gets reset after tx idle. Fix that. While at it also make sure any code touching ss_force will only get compiled if debugfs support is configured. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: increase the number of PAPD channel groups to 9Eran Harary
Newer devices have more PAPD channel groups. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: consider TDLS queues as used during drainArik Nemtsov
When a TDLS station is being drained its Tx queues are still in use. Don't allocate them to a different station in the meantime. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: rs: disable MIMO for low latency P2PEyal Shapira
Due to issues with Miracast adapters MIMO reception disable use of MIMO when for low latency P2P traffic. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: rs: adapt rate matching to new STBC/BFEREyal Shapira
Once the FW supports autonomous decision between STBC/BFER/SISO we no longer set the STBC bit and ANT_AB in the rate table. However the FW rate in the tx response will have the STBC or BFER bit set and the antennas set to ANT_AB in case these were chosen by it. This will cause us to discard any such response as unmatching the current LQ table and thus break the rs search cycle completely. Fix this by relaxing the rate matching in case we're working with the new API and STBC/BFER are used. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: rs: fix BT Coex check to look at the correct antEyal Shapira
The check to avoid the shared antenna was passed the wrong antenna parameter. It should have checked whether the antenna of the next column we're considering is allowed and instead it was passed the current antenna. This could lead to a wrong choice of the next column in the rs algorithm and non optimal performance. Fixes: commit 219fb66b49fac64bb ("iwlwifi: mvm: rs - don't use the shared antenna when BT load is high") Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01ALSA: dice: fix wrong offsets for Dice interfaceTakashi Sakamoto
For received packet stream, the offset of 'RX_SEQ_START' locates after the offset of 'RX_NUMBER_MIDI', although current macro and proc output includes wrong offsets. Fortunately, this bug doesn't affect streaming functionality because these macro is not used. This commit fixes these wrong macro and outputs. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-01locking/rtmutex: Set state back to running on errorSebastian Andrzej Siewior
The "usual" path is: - rt_mutex_slowlock() - set_current_state() - task_blocks_on_rt_mutex() (ret 0) - __rt_mutex_slowlock() - sleep or not but do return with __set_current_state(TASK_RUNNING) - back to caller. In the early error case where task_blocks_on_rt_mutex() return -EDEADLK we never change the task's state back to RUNNING. I assume this is intended. Without this change after ww_mutex using rt_mutex the selftest passes but later I get plenty of: | bad: scheduling from the idle thread! backtraces. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: afffc6c1805d ("locking/rtmutex: Optimize setting task running after being blocked") Link: http://lkml.kernel.org/r/1425056229-22326-4-git-send-email-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-01net: do not use rcu in rtnl_dump_ifinfo()Eric Dumazet
We did a failed attempt in the past to only use rcu in rtnl dump operations (commit e67f88dd12f6 "net: dont hold rtnl mutex during netlink dump callbacks") Now that dumps are holding RTNL anyway, there is no need to also use rcu locking, as it forbids any scheduling ability, like GFP_KERNEL allocations that controlling path should use instead of GFP_ATOMIC whenever possible. This should fix following splat Cong Wang reported : [ INFO: suspicious RCU usage. ] 3.19.0+ #805 Tainted: G W include/linux/rcupdate.h:538 Illegal context switch in RCU read-side critical section! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by ip/771: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff8182b8f4>] netlink_dump+0x21/0x26c #1: (rcu_read_lock){......}, at: [<ffffffff817d785b>] rcu_read_lock+0x0/0x6e stack backtrace: CPU: 3 PID: 771 Comm: ip Tainted: G W 3.19.0+ #805 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000001 ffff8800d51e7718 ffffffff81a27457 0000000029e729e6 ffff8800d6108000 ffff8800d51e7748 ffffffff810b539b ffffffff820013dd 00000000000001c8 0000000000000000 ffff8800d7448088 ffff8800d51e7758 Call Trace: [<ffffffff81a27457>] dump_stack+0x4c/0x65 [<ffffffff810b539b>] lockdep_rcu_suspicious+0x107/0x110 [<ffffffff8109796f>] rcu_preempt_sleep_check+0x45/0x47 [<ffffffff8109e457>] ___might_sleep+0x1d/0x1cb [<ffffffff8109e67d>] __might_sleep+0x78/0x80 [<ffffffff814b9b1f>] idr_alloc+0x45/0xd1 [<ffffffff810cb7ab>] ? rcu_read_lock_held+0x3b/0x3d [<ffffffff814b9f9d>] ? idr_for_each+0x53/0x101 [<ffffffff817c1383>] alloc_netid+0x61/0x69 [<ffffffff817c14c3>] __peernet2id+0x79/0x8d [<ffffffff817c1ab7>] peernet2id+0x13/0x1f [<ffffffff817d8673>] rtnl_fill_ifinfo+0xa8d/0xc20 [<ffffffff810b17d9>] ? __lock_is_held+0x39/0x52 [<ffffffff817d894f>] rtnl_dump_ifinfo+0x149/0x213 [<ffffffff8182b9c2>] netlink_dump+0xef/0x26c [<ffffffff8182bcba>] netlink_recvmsg+0x17b/0x2c5 [<ffffffff817b0adc>] __sock_recvmsg+0x4e/0x59 [<ffffffff817b1b40>] sock_recvmsg+0x3f/0x51 [<ffffffff817b1f9a>] ___sys_recvmsg+0xf6/0x1d9 [<ffffffff8115dc67>] ? handle_pte_fault+0x6e1/0xd3d [<ffffffff8100a3a0>] ? native_sched_clock+0x35/0x37 [<ffffffff8109f45b>] ? sched_clock_local+0x12/0x72 [<ffffffff8109f6ac>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff810cb7ab>] ? rcu_read_lock_held+0x3b/0x3d [<ffffffff811abde8>] ? __fcheck_files+0x4c/0x58 [<ffffffff811ac556>] ? __fget_light+0x2d/0x52 [<ffffffff817b376f>] __sys_recvmsg+0x42/0x60 [<ffffffff817b379f>] SyS_recvmsg+0x12/0x1c Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 0c7aecd4bde4b7302 ("netns: add rtnl cmd to add and get peer netns ids") Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01sh_eth: Fix lost MAC address on kexecGeert Uytterhoeven
Commit 740c7f31c094703c ("sh_eth: Ensure DMA engines are stopped before freeing buffers") added a call to sh_eth_reset() to the sh_eth_set_ringparam() and sh_eth_close() paths. However, setting the software reset bit(s) in the EDMR register resets the MAC Address Registers to zero. Hence after kexec, the new kernel doesn't detect a valid MAC address and assigns a random MAC address, breaking DHCP. Set the MAC address again after the reset in sh_eth_dev_exit() to fix this. Tested on r8a7740/armadillo (GETHER) and r8a7791/koelsch (FAST_RCAR). Fixes: 740c7f31c094703c ("sh_eth: Ensure DMA engines are stopped before freeing buffers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28net: bcmgenet: fix throughtput regressionJaedon Shin
This patch adds bcmgenet_tx_poll for the tx_rings. This can reduce the interrupt load and send xmit in network stack on time. This also separated for the completion of tx_ring16 from bcmgenet_poll. The bcmgenet_tx_reclaim of tx_ring[{0,1,2,3}] operative by an interrupt is to be not more than a certain number TxBDs. It is caused by too slowly reclaiming the transmitted skb. Therefore, performance degradation of xmit after 605ad7f ("tcp: refine TSO autosizing"). Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28macvtap: make sure neighbour code can push ethernet headerEric Dumazet
Brian reported crashes using IPv6 traffic with macvtap/veth combo. I tracked the crashes in neigh_hh_output() -> memcpy(skb->data - HH_DATA_MOD, hh->hh_data, HH_DATA_MOD); Neighbour code assumes headroom to push Ethernet header is at least 16 bytes. It appears macvtap has only 14 bytes available on arches where NET_IP_ALIGN is 0 (like x86) Effect is a corruption of 2 bytes right before skb->head, and possible crashes if accessing non existing memory. This fix should also increase IPv4 performance, as paranoid code in ip_finish_output2() wont have to call skb_realloc_headroom() Reported-by: Brian Rak <brak@vultr.com> Tested-by: Brian Rak <brak@vultr.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28Merge branch 's390-next'David S. Miller
Ursula Braun says: ==================== s390: network patches for net-next here are some s390 related patches for net-next ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28MAINTAINERS: update S390 NETWORK DRIVERS maintainerUrsula Braun
remove Frank Blaschka as S390 NETWORK DRIVERS maintainer Acked-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28qeth: Fix command sizesStefan Raspl
This patch adjusts two instances where we were using the (too big) struct qeth_ipacmd_setadpparms size instead of the commands' actual size. This didn't do any harm, but wasted a few bytes. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28s390: remove claw driverUrsula Braun
claw devices are outdated and no longer supported. This patch removes the claw driver. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28Merge tag 'mac80211-for-davem-2015-02-27' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A few patches have accumulated, among them the fix for Linus's four-way-handshake problem. The others are various small fixes for problems all over, nothing really stands out. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28cpuidle / sleep: Do sanity checks in cpuidle_enter_freeze() tooRafael J. Wysocki
Modify cpuidle_enter_freeze() to do the sanity checks done by cpuidle_select() to avoid crashing the suspend-to-idle code path in case something is missing. Fixes: 381063133246 (PM / sleep: Re-implement suspend-to-idle handling) Original-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2015-02-28idle / sleep: Avoid excessive disabling and enabling interruptsRafael J. Wysocki
Disabling interrupts at the end of cpuidle_enter_freeze() is not useful, because its caller, cpuidle_idle_call(), re-enables them right away after invoking it. To avoid that unnecessary back and forth dance with interrupts, make cpuidle_enter_freeze() enable interrupts after calling enter_freeze_proper() and drop the local_irq_disable() at its end, so that all of the code paths in it end up with interrupts enabled. Then, cpuidle_idle_call() will not need to re-enable interrupts after calling cpuidle_enter_freeze() any more, because the latter will return with interrupts enabled, in analogy with cpuidle_enter(). Reported-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2015-02-28tcp: cleanup static functionsEric Dumazet
tcp_fastopen_create_child() is static and should not be exported. tcp4_gso_segment() and tcp6_gso_segment() should be static. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28hyperv: Implement netvsc_get_channels() ethool opAndrew Schwartzmeyer
This adds support for reporting the actual and maximum combined channels count of the hv_netvsc driver via 'ethtool --show-channels'. This required adding 'max_chn' to 'struct netvsc_device', and assigning it 'rsscap.num_recv_que' in 'rndis_filter_device_add'. Now we can access the combined maximum channel count via 'struct netvsc_device' in the ethtool callback. Signed-off-by: Andrew Schwartzmeyer <andrew@schwartzmeyer.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28net: Verify permission to link_net in newlinkEric W. Biederman
When applicable verify that the caller has permisson to the underlying network namespace for a newly created network device. Similary checks exist for the network namespace a network device will be created in. Fixes: 317f4810e45e ("rtnl: allow to create device with IFLA_LINK_NETNSID set") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28net: Verify permission to dest_net in newlinkEric W. Biederman
When applicable verify that the caller has permision to create a network device in another network namespace. This check is already present when moving a network device between network namespaces in setlink so all that is needed is to duplicate that check in newlink. This change almost backports cleanly, but there are context conflicts as the code that follows was added in v4.0-rc1 Fixes: b51642f6d77b net: Enable a userns root rtnl calls that are safe for unprivilged users Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28Merge branch 'tcp-tso'David S. Miller
Eric Dumazet says: ==================== tcp: tso improvements This patch serie reworks tcp_tso_should_defer() a bit to get less bursts, and better ECN behavior. We also removed tso_deferred field in tcp socket. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 07:26:09 +0000