| Age | Commit message (Collapse) | Author |
|---|
|
There is a spelling mistake in a dev_err_once message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
When a hid-steam device is removed it must clean up the client_hdev used for
intercepting hidraw access. This can lead to scheduling deferred work to
reattach the input device. Though the cleanup cancels the deferred work, this
was done before the client_hdev itself is cleaned up, so it gets rescheduled.
This patch fixes the ordering to make sure the deferred work is properly
canceled.
Reported-by: syzbot+0154da2d403396b2bd59@syzkaller.appspotmail.com
Fixes: 79504249d7e2 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
There is a spelling mistake in a literal string. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Syzkaller reports a NULL pointer dereference issue in input_event().
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: null-ptr-deref in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: null-ptr-deref in is_event_supported drivers/input/input.c:67 [inline]
BUG: KASAN: null-ptr-deref in input_event+0x42/0xa0 drivers/input/input.c:395
Read of size 8 at addr 0000000000000028 by task syz-executor199/2949
CPU: 0 UID: 0 PID: 2949 Comm: syz-executor199 Not tainted 6.13.0-rc4-syzkaller-00076-gf097a36ef88d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
kasan_report+0xd9/0x110 mm/kasan/report.c:602
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
is_event_supported drivers/input/input.c:67 [inline]
input_event+0x42/0xa0 drivers/input/input.c:395
input_report_key include/linux/input.h:439 [inline]
key_down drivers/hid/hid-appleir.c:159 [inline]
appleir_raw_event+0x3e5/0x5e0 drivers/hid/hid-appleir.c:232
__hid_input_report.constprop.0+0x312/0x440 drivers/hid/hid-core.c:2111
hid_ctrl+0x49f/0x550 drivers/hid/usbhid/hid-core.c:484
__usb_hcd_giveback_urb+0x389/0x6e0 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x396/0x450 drivers/usb/core/hcd.c:1734
dummy_timer+0x17f7/0x3960 drivers/usb/gadget/udc/dummy_hcd.c:1993
__run_hrtimer kernel/time/hrtimer.c:1739 [inline]
__hrtimer_run_queues+0x20a/0xae0 kernel/time/hrtimer.c:1803
hrtimer_run_softirq+0x17d/0x350 kernel/time/hrtimer.c:1820
handle_softirqs+0x206/0x8d0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0xfa/0x160 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1049
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
__mod_timer+0x8f6/0xdc0 kernel/time/timer.c:1185
add_timer+0x62/0x90 kernel/time/timer.c:1295
schedule_timeout+0x11f/0x280 kernel/time/sleep_timeout.c:98
usbhid_wait_io+0x1c7/0x380 drivers/hid/usbhid/hid-core.c:645
usbhid_init_reports+0x19f/0x390 drivers/hid/usbhid/hid-core.c:784
hiddev_ioctl+0x1133/0x15b0 drivers/hid/usbhid/hiddev.c:794
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This happens due to the malformed report items sent by the emulated device
which results in a report, that has no fields, being added to the report list.
Due to this appleir_input_configured() is never called, hidinput_connect()
fails which results in the HID_CLAIMED_INPUT flag is not being set. However,
it does not make appleir_probe() fail and lets the event callback to be
called without the associated input device.
Thus, add a check for the HID_CLAIMED_INPUT flag and leave the event hook
early if the driver didn't claim any input_dev for some reason. Moreover,
some other hid drivers accessing input_dev in their event callbacks do have
similar checks, too.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 9a4a5574ce42 ("HID: appleir: add support for Apple ir devices")
Cc: stable@vger.kernel.org
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Remove the fixup to make the Omoton KB066's F6 key F6 when not holding
Fn. That was really just a hack to allow typing F6 in fnmode>0, and it
didn't fix any of the other F keys that were likewise untypable in
fnmode>0. Instead, because the Omoton's Fn key is entirely internal to
the keyboard, completely disable Fn key translation when an Omoton is
detected, which will prevent the hid-apple driver from interfering with
the keyboard's built-in Fn key handling. All of the F keys, including
F6, are then typable when Fn is held.
The Omoton KB066 and the Apple A1255 both have HID product code
05ac:022c. The self-reported name of every original A1255 when they left
the factory was "Apple Wireless Keyboard". By default, Mac OS changes
the name to "<username>'s keyboard" when pairing with the keyboard, but
Mac OS allows the user to set the internal name of Apple keyboards to
anything they like. The Omoton KB066's name, on the other hand, is not
configurable: It is always "Bluetooth Keyboard". Because that name is so
generic that a user might conceivably use the same name for a real Apple
keyboard, detect Omoton keyboards based on both having that exact name
and having HID product code 022c.
Fixes: 819083cb6eed ("HID: apple: fix up the F6 key on the Omoton KB066 keyboard")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
We have two places to print "failed to set a report to ...",
use "get a report from" instead of "set a report to", it makes
people who knows less about the module to know where the error
happened.
Before:
i2c_hid_acpi i2c-FTSC1000:00: failed to set a report to device: -11
After:
i2c_hid_acpi i2c-FTSC1000:00: failed to get a report from device: -11
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Acer's WMI driver uses balanced-performance but AMD-PMF doesn't.
In case a machine binds with both drivers let amd-pmf use
balanced-performance as well.
Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers")
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-4-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When amd-pmf and asus-wmi are both bound no low power option shows
up in sysfs. Add a hidden choice for amd-pmf to support 'quiet' mode
to let both bind.
Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers")
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-3-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When two drivers don't support all the same profiles the legacy interface
only exports the common profiles.
This causes problems for cases where one driver uses low-power but another
uses quiet because the result is that neither is exported to sysfs.
To allow two drivers to disagree, add support for "hidden choices".
Hidden choices are platform profiles that a driver supports to be
compatible with the platform profile of another driver.
Fixes: 688834743d67 ("ACPI: platform_profile: Allow multiple handlers")
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Closes: https://lore.kernel.org/platform-driver-x86/e64b771e-3255-42ad-9257-5b8fc6c24ac9@gmx.de/T/#mc068042dd29df36c16c8af92664860fc4763974b
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-2-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Any rules using engine matching are currently broken due RTP processing
happening too in early init, before the list of hardware engines has been
initialised.
Fix this by moving workaround processing to later in the driver probe
sequence, to just before the processed list is used for the first time.
Looking at the debugfs gt0/workarounds on ADL-P we notice 14011060649
should be present while we see, before:
GT Workarounds
14011059788
14015795083
And with the patch:
GT Workarounds
14011060649
14011059788
14015795083
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227101304.46660-2-tvrtko.ursulin@igalia.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 25d434cef791e03cf40680f5441b576c639bfa84)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently we just leave it uninitialised, which at first looks harmless,
however we also don't zero out the pfn array, and with pfn_flags_mask
the idea is to be able set individual flags for a given range of pfn or
completely ignore them, outside of default_flags. So here we end up with
pfn[i] & pfn_flags_mask, and if both are uninitialised we might get back
an unexpected flags value, like asking for read only with default_flags,
but getting back write on top, leading to potentially bogus behaviour.
To fix this ensure we zero the pfn_flags_mask, such that hmm only
considers the default_flags and not also the initial pfn[i] value.
v2 (Thomas):
- Prefer proper initializer.
Fixes: 81e058a3e7fd ("drm/xe: Introduce helper to populate userptr")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226174748.294285-2-matthew.auld@intel.com
(cherry picked from commit dd8c01e42f4c5c1eaf02f003d7d588ba6706aa71)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We create the stream encoders and attach connectors for each pipe we
have. As the number of pipes has increased, we've failed to update the
topology manager maximum number of payloads to match that. Bump up the
max stream count to match number of pipes, enabling the fourth stream on
platforms that support four pipes.
Cc: stable@vger.kernel.org
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226135626.1956012-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 15bccbfb78d63a2a621b30caff8b9424160c6c89)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This is already handled below in the code by fixup_initial_plane_config.
Fixes: a8153627520a ("drm/i915: Try to relocate the BIOS fb to the start of ggtt")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210083111.230484-3-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
(cherry picked from commit 2218704997979fbf11765281ef752f07c5cf25bb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Commit 2a86f6612164 ("kbuild: use KBUILD_DEFCONFIG as the fallback
for DEFCONFIG_LIST") removed arch/$ARCH/defconfig; however,
the document has not been updated to reflect this change yet.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The headercheck tries to call clang with a mix of compiler arguments
that don't include the target architecture. When building e.g. x86
headers on arm64, this produces a warning like
clang: warning: unknown platform, assuming -mfloat-abi=soft
Add in the KBUILD_CPPFLAGS, which contain the target, in order to make it
build properly.
See also 1b71c2fb04e7 ("kbuild: userprogs: fix bitsize and target
detection on clang").
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Fixes: feb843a469fb ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fix from Rob Herring:
- Revert reserved-memory 'alignment' property to use '#address-cells'
instead of '#size-cells'. What's in use trumps the spec.
* tag 'devicetree-fixes-for-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
Revert "of: reserved-memory: Fix using wrong number of cells to get property 'alignment'"
|
|
The userprog infrastructure links objects files through $(CC).
Either explicitly by manually calling $(CC) on multiple object files or
implicitly by directly compiling a source file to an executable.
The documentation at Documentation/kbuild/llvm.rst indicates that ld.lld
would be used for linking if LLVM=1 is specified.
However clang instead will use either a globally installed cross linker
from $PATH called ${target}-ld or fall back to the system linker, which
probably does not support crosslinking.
For the normal kernel build this is not an issue because the linker is
always executed directly, without the compiler being involved.
Explicitly pass --ld-path to clang so $(LD) is respected.
As clang 13.0.1 is required to build the kernel, this option is available.
Fixes: 7f3a59db274c ("kbuild: add infrastructure to build userspace programs")
Cc: stable@vger.kernel.org # needs wrapping in $(cc-option) for < 6.9
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
pipe_readable(), pipe_writable(), and pipe_poll() can read "pipe->head"
and "pipe->tail" outside of "pipe->mutex" critical section. When the
head and the tail are read individually in that order, there is a window
for interruption between the two reads in which both the head and the
tail can be updated by concurrent readers and writers.
One of the problematic scenarios observed with hackbench running
multiple groups on a large server on a particular pipe inode is as
follows:
pipe->head = 36
pipe->tail = 36
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wakes up: pipe not full*
hackbench-118762 [057] ..... 1029.550548: pipe_write: head: 36 -> 37 [tail: 36]
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wake up next reader 118740*
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wake up next writer 118768*
hackbench-118768 [206] ..... 1029.55055X: pipe_write: *writer wakes up*
hackbench-118768 [206] ..... 1029.55055X: pipe_write: head = READ_ONCE(pipe->head) [37]
... CPU 206 interrupted (exact wakeup was not traced but 118768 did read head at 37 in traces)
hackbench-118740 [057] ..... 1029.550558: pipe_read: *reader wakes up: pipe is not empty*
hackbench-118740 [057] ..... 1029.550558: pipe_read: tail: 36 -> 37 [head = 37]
hackbench-118740 [057] ..... 1029.550559: pipe_read: *pipe is empty; wakeup writer 118768*
hackbench-118740 [057] ..... 1029.550559: pipe_read: *sleeps*
hackbench-118766 [185] ..... 1029.550592: pipe_write: *New writer comes in*
hackbench-118766 [185] ..... 1029.550592: pipe_write: head: 37 -> 38 [tail: 37]
hackbench-118766 [185] ..... 1029.550592: pipe_write: *wakes up reader 118766*
hackbench-118740 [185] ..... 1029.550598: pipe_read: *reader wakes up; pipe not empty*
hackbench-118740 [185] ..... 1029.550599: pipe_read: tail: 37 -> 38 [head: 38]
hackbench-118740 [185] ..... 1029.550599: pipe_read: *pipe is empty*
hackbench-118740 [185] ..... 1029.550599: pipe_read: *reader sleeps; wakeup writer 118768*
... CPU 206 switches back to writer
hackbench-118768 [206] ..... 1029.550601: pipe_write: tail = READ_ONCE(pipe->tail) [38]
hackbench-118768 [206] ..... 1029.550601: pipe_write: pipe_full()? (u32)(37 - 38) >= 16? Yes
hackbench-118768 [206] ..... 1029.550601: pipe_write: *writer goes back to sleep*
[ Tasks 118740 and 118768 can then indefinitely wait on each other. ]
The unsigned arithmetic in pipe_occupancy() wraps around when
"pipe->tail > pipe->head" leading to pipe_full() returning true despite
the pipe being empty.
The case of genuine wraparound of "pipe->head" is handled since pipe
buffer has data allowing readers to make progress until the pipe->tail
wraps too after which the reader will wakeup a sleeping writer, however,
mistaking the pipe to be full when it is in fact empty can lead to
readers and writers waiting on each other indefinitely.
This issue became more problematic and surfaced as a hang in hackbench
after the optimization in commit aaec5a95d596 ("pipe_read: don't wake up
the writer if the pipe is still full") significantly reduced the number
of spurious wakeups of writers that had previously helped mask the
issue.
To avoid missing any updates between the reads of "pipe->head" and
"pipe->write", unionize the two with a single unsigned long
"pipe->head_tail" member that can be loaded atomically.
Using "pipe->head_tail" to read the head and the tail ensures the
lockless checks do not miss any updates to the head or the tail and
since those two are only updated under "pipe->mutex", it ensures that
the head is always ahead of, or equal to the tail resulting in correct
calculations.
[ prateek: commit log, testing on x86 platforms. ]
Reported-and-debugged-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Closes: https://lore.kernel.org/lkml/e813814e-7094-4673-bc69-731af065a0eb@amd.com/
Reported-by: Alexey Gladkov <legion@kernel.org>
Closes: https://lore.kernel.org/all/Z8Wn0nTvevLRG_4m@example.org/
Fixes: 8cefc107ca54 ("pipe: Use head and tail pointers for the ring, not cursor and length")
Tested-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix a goof where KVM sets CPUID.0x80000022.EAX to CPUID.0x80000022.EBX
instead of zeroing both when PERFMON_V2 isn't supported by KVM. In
practice, barring a buggy CPU (or vCPU model when running nested) only the
!enable_pmu case is affected, as KVM always supports PERFMON_V2 if it's
available in hardware, i.e. CPUID.0x80000022.EBX will be '0' if PERFMON_V2
is unsupported.
For the !enable_pmu case, the bug is relatively benign as KVM will refuse
to enable PMU capabilities, but a VMM that reflects KVM's supported CPUID
into the guest could inadvertently induce #GPs in the guest due to
advertising support for MSRs that KVM refuses to emulate.
Fixes: 94cdeebd8211 ("KVM: x86/cpuid: Add AMD CPUID ExtPerfMonAndDbg leaf 0x80000022")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250304082314.472202-3-xiaoyao.li@intel.com
[sean: massage shortlog and changelog, tag for stable]
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
First 6.15 material:
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
* tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (128 commits)
wifi: iwlwifi: remove mld/roc.c
wifi: mac80211: refactor populating mesh related fields in sinfo
wifi: cfg80211: reorg sinfo structure elements for mesh
wifi: iwlwifi: Fix spelling mistake "Increate" -> "Increase"
wifi: iwlwifi: add Debug Host Command APIs
wifi: iwlwifi: add IWL_MAX_NUM_IGTKS macro
wifi: iwlwifi: add OMI bandwidth reduction APIs
wifi: iwlwifi: remove mvm prefix from iwl_mvm_d3_end_notif
wifi: iwlwifi: remember if the UATS table was read successfully
wifi: iwlwifi: export iwl_get_lari_config_bitmap
wifi: iwlwifi: add support for external 32 KHz clock
wifi: iwlwifi: mld: add a debug level for EHT prints
wifi: iwlwifi: mld: add a debug level for PTP prints
wifi: iwlwifi: remove mvm prefix from iwl_mvm_esr_mode_notif
wifi: iwlwifi: use 0xff instead of 0xffffffff for invalid
wifi: iwlwifi: location api cleanup
wifi: cfg80211: expose update timestamp to drivers
wifi: mac80211: add ieee80211_iter_chan_contexts_mtx
wifi: mac80211: fix integer overflow in hwmp_route_info_get()
wifi: mac80211: Fix possible integer promotion issue
...
====================
Link: https://patch.msgid.link/20250304125605.127914-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
bugfixes for 6.14:
* regressions from this cycle:
- mac80211: fix sparse warning for monitor
- nl80211: disable multi-link reconfiguration (needs fixing)
* older issues:
- cfg80211: reject badly combined cooked monitor,
fix regulatory hint validity checks
- mac80211: handle TXQ flush w/o driver per-sta flush,
fix debugfs for monitor, fix element inheritance
- iwlwifi: fix rfkill, dead firmware handling, rate API
version, free A-MSDU handling, avoid large
allocations, fix string format
- brcmfmac: fix power handling on some boards
* tag 'wireless-2025-03-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: nl80211: disable multi-link reconfiguration
wifi: cfg80211: regulatory: improve invalid hints checking
wifi: brcmfmac: keep power during suspend if board requires it
wifi: mac80211: Fix sparse warning for monitor_sdata
wifi: mac80211: fix vendor-specific inheritance
wifi: mac80211: fix MLE non-inheritance parsing
wifi: iwlwifi: Fix A-MSDU TSO preparation
wifi: iwlwifi: Free pages allocated when failing to build A-MSDU
wifi: iwlwifi: limit printed string from FW file
wifi: iwlwifi: mvm: use the right version of the rate API
wifi: iwlwifi: mvm: don't try to talk to a dead firmware
wifi: iwlwifi: mvm: don't dump the firmware state upon RFKILL while suspend
wifi: iwlwifi: mvm: clean up ROC on failure
wifi: iwlwifi: fw: avoid using an uninitialized variable
wifi: iwlwifi: fw: allocate chained SG tables for dump
wifi: mac80211: remove debugfs dir for virtual monitor
wifi: mac80211: Cleanup sta TXQs on flush
wifi: nl80211: reject cooked mode if it is set along with other flags
====================
Link: https://patch.msgid.link/20250304124435.126272-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When fgraph is enabled the traced function return address is replaced with
trampoline return_to_handler(). The original return address of the traced
function is saved in per task return stack along with a stack pointer for
reliable stack unwinding via function_graph_enter_regs().
During stack unwinding e.g. for livepatching, ftrace_graph_ret_addr()
identifies the original return address of the traced function with the
saved stack pointer.
With a recent change, the stack pointers passed to ftrace_graph_ret_addr()
and function_graph_enter_regs() do not match anymore, and therefore the
original return address is not found.
Pass the correct stack pointer to function_graph_enter_regs() to fix this.
Fixes: 7495e179b478 ("s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Commit 14be4e6f3522 ("selftests: vDSO: fix ELF hash table entry size for s390x")
changed the type of the ELF hash table entries to 64bit on s390x.
However the *GNU* hash tables entries are always 32bit.
The "bucket" pointer is shared between both hash algorithms.
On s390, this caused the GNU hash algorithm to access its 32-bit entries as if they
were 64-bit, triggering compiler warnings (assignment between "Elf64_Xword *" and
"Elf64_Word *") and runtime crashes.
Introduce a new dedicated "gnu_bucket" pointer which is used by the GNU hash.
Fixes: e0746bde6f82 ("selftests/vDSO: support DT_GNU_HASH")
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250217-selftests-vdso-s390-gnu-hash-v2-1-f6c2532ffe2a@linutronix.de
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The test_monitor_call() inline assembly uses the xgr instruction, which
also modifies the condition code, to clear a register. However the clobber
list of the inline assembly does not specify that the condition code is
modified, which may lead to incorrect code generation.
Use the lhi instruction instead to clear the register without that the
condition code is modified. Furthermore this limits clearing to the lower
32 bits of val, since its type is int.
Fixes: 17248ea03674 ("s390: fix __EMIT_BUG() macro")
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The alternative path leads to a build error after a recent change:
sound/pci/hda/patch_realtek.c: In function 'alc233_fixup_lenovo_low_en_micmute_led':
include/linux/stddef.h:9:14: error: called object is not a function or function pointer
9 | #define NULL ((void *)0)
| ^
sound/pci/hda/patch_realtek.c:5041:49: note: in expansion of macro 'NULL'
5041 | #define alc233_fixup_lenovo_line2_mic_hotkey NULL
| ^~~~
sound/pci/hda/patch_realtek.c:5063:9: note: in expansion of macro 'alc233_fixup_lenovo_line2_mic_hotkey'
5063 | alc233_fixup_lenovo_line2_mic_hotkey(codec, fix, action);
Using IS_REACHABLE() is somewhat questionable here anyway since it
leads to the input code not working when the HDA driver is builtin
but input is in a loadable module. Replace this with a hard compile-time
dependency on CONFIG_INPUT. In practice this won't chance much
other than solve the compiler error because it is rare to require
sound output but no input support.
Fixes: f603b159231b ("ALSA: hda/realtek - add supported Mic Mute LED for Lenovo platform")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250304142620.582191-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Hardware reports jack absent after reset/suspension regardless of jack
state, so introduce an additional delay only in suspension case to allow
proper detection to take place after a short delay.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250304140504.139245-1-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Breno Leitao says:
====================
netconsole: Add taskname sysdata support
This patchset introduces a new feature to the netconsole extradata
subsystem that enables the inclusion of the current task's name in the
sysdata output of netconsole messages.
This enhancement is particularly valuable for large-scale deployments,
such as Meta's, where netconsole collects messages from millions of
servers and stores them in a data warehouse for analysis. Engineers
often rely on these messages to investigate issues and assess kernel
health.
One common challenge we face is determining the context in which
a particular message was generated. By including the task name
(task->comm) with each message, this feature provides a direct answer to
the frequently asked question: "What was running when this message was
generated?"
This added context will significantly improve our ability to diagnose
and troubleshoot issues, making it easier to interpret output of
netconsole.
The patchset consists of seven patches that implement the following changes:
* Refactor CPU number formatting into a separate function
* Prefix CPU_NR sysdata feature with SYSDATA_
* Patch to covert a bitwise operation into boolean
* Add configfs controls for taskname sysdata feature
* Add taskname to extradata entry count
* Add support for including task name in netconsole's extra data output
* Document the task name feature in Documentation/networking/netconsole.rst
* Add test coverage for the task name feature to the existing sysdata selftest script
These changes allow users to enable or disable the task name feature via
configfs and provide additional context for kernel messages by showing
which task generated each console message.
I have tested these patches on some servers and they seem to work as
expected.
v1: https://lore.kernel.org/r/20250221-netcons_current-v1-0-21c86ae8fc0d@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
====================
Link: https://patch.msgid.link/20250228-netcons_current-v2-0-f53ff79a0db2@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add test coverage for the netconsole task name feature to the existing
sysdata selftest script. This extends the test infrastructure to verify
that task names are correctly appended when enabled and absent when
disabled.
The test validates that:
- Task names appear in the expected format "taskname=<name>"
- Task names are included when the feature is enabled
- Task names are excluded when the feature is disabled
- The feature works correctly alongside other sysdata fields like CPU
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add documentation for the netconsole task name feature in
Documentation/networking/netconsole.rst. This explains how to enable
task name via configfs and demonstrates the output format.
The documentation includes:
- How to enable/disable the feature via taskname_enabled
- The format of the task name in the output
- An example showing the task name appearing in messages
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This is the core patch for this whole patchset. Add support for
including the current task's name in netconsole's extra data output.
This adds a new append_taskname() function that writes the task name
(from current->comm) into the target's extradata buffer, similar to how
CPU numbers are handled.
The task name is included when the SYSDATA_TASKNAME field is set,
appearing in the format "taskname=<name>" in the output. This additional
context can help with debugging by showing which task generated each
console message.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add configfs interface to enable/disable the taskname sysdata feature.
This adds the following functionality:
The implementation follows the same pattern as the existing CPU number
feature, ensuring consistent behavior and error handling across sysdata
features.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
New SYSDATA_TASKNAME feature flag to track when taskname append is enabled.
Additional check in count_extradata_entries() to include taskname in
total, counting it as an entry in extradata. This function is used to
check if we are not overflowing the number of extradata items.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Extract CPU number formatting logic from prepare_extradata() into a new
append_cpu_nr() function.
This refactoring improves code organization by isolating CPU number
formatting into its own function while reducing the complexity of
prepare_extradata().
The change prepares the codebase for the upcoming taskname feature by
establishing a consistent pattern for handling sysdata features.
The CPU number formatting logic itself remains unchanged; only its
location has moved to improve maintainability.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert the current state assignment to use explicit boolean conversion,
making the code more robust and easier to read. This change adds a
double-negation operator to ensure consistent boolean conversion as
suggested by Paolo[1].
This approach aligns with the existing pattern used in
sysdata_cpu_nr_enabled_show().
Link: https://lore.kernel.org/all/7309e760-63b0-4b58-ad33-2fb8db361141@redhat.com/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Rename the CPU_NR enum value to SYSDATA_CPU_NR to establish a consistent
naming convention for sysdata features. This change prepares for
upcoming additions to the sysdata feature set by clearly grouping
related features under the SYSDATA prefix.
This change is purely cosmetic and does not modify any functionality.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A recent cleanup went a bit too far and dropped clearing the cycle bit
of link TRBs, so it stays different from the rest of the ring half of
the time. Then a race occurs: if the xHC reaches such link TRB before
more commands are queued, the link's cycle bit unintentionally matches
the xHC's cycle so it follows the link and waits for further commands.
If more commands are queued before the xHC gets there, inc_enq() flips
the bit so the xHC later sees a mismatch and stops executing commands.
This function is called before suspend and 50% of times after resuming
the xHC is doomed to get stuck sooner or later. Then some Stop Endpoint
command fails to complete in 5 seconds and this shows up
xhci_hcd 0000:00:10.0: xHCI host not responding to stop endpoint command
xhci_hcd 0000:00:10.0: xHCI host controller not responding, assume dead
xhci_hcd 0000:00:10.0: HC died; cleaning up
followed by loss of all USB decives on the affected bus. That's if you
are lucky, because if Set Deq gets stuck instead, the failure is silent.
Likely responsible for kernel bug 219824. I found this while searching
for possible causes of that regression and reproduced it locally before
hearing back from the reporter. To repro, simply wait for link cycle to
become set (debugfs), then suspend, resume and wait. To accelerate the
failure I used a script which repeatedly starts and stops a UVC camera.
Some HCs get fully reinitialized on resume and they are not affected.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219824
Fixes: 36b972d4b7ce ("usb: xhci: improve xhci_clear_command_ring()")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250304113147.3322584-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This file should never have been part of the commit, remove it.
Fixes: af3be9088404 ("wifi: iwlwifi: support ROC version 6")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Jijie Shao says:
====================
Support some enhances features for the HIBMCGE driver
In this patch set, we mainly implement some enhanced features.
It mainly includes the statistics, diagnosis, and ioctl to
improve fault locating efficiency,
abnormal irq and MAC link exception handling feature
to enhance driver robustness,
and rx checksum offload feature to improve performance
(tx checksum feature has been implemented).
v3: https://lore.kernel.org/all/20250221115526.1082660-2-shaojijie@huawei.com/
v2: https://lore.kernel.org/all/20250218085829.3172126-1-shaojijie@huawei.com/
v1: https://lore.kernel.org/all/20250213035529.2402283-1-shaojijie@huawei.com/
====================
Link: https://patch.msgid.link/20250228115411.1750803-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch implements the .ndo_eth_ioctl() to
read and write the PHY register.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The MAC hardware is on the BMC side, and the driver is on the host side.
When the driver is abnormal, the BMC cannot directly detect the
exception cause.
Therefore, this patch implements the BMC diagnosis feature.
When users query driver diagnosis information on the BMC, the driver
detects the query request in the scheduled task and reports
driver statistics and link status to the BMC through the bar space.
The BMC collects logs to analyze exception causes.
Currently, the scheduled task is executed every 30 seconds
To quickly respond to user query requests,
this patch changes the scheduled task to once every second.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If the rate changed frequently, the PHY link ok,
but the MAC link maybe fails.
As a result, the network port is unavailable.
According to the documents of the chip,
core_reset needs to do to fix the fault.
In hw_adjus_link(), the core_reset is added to try to
ensure that MAC link status is normal.
In addition, MAC link failure detection is added.
If the MAC link fails after core_reset, driver invokes
the phy_stop() and phy_start() to re-link.
Due to phydev->lock, re-link cannot be triggered
in adjust_link(). Therefore, this operation
is invoked in a scheduled task.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
the hardware error was reported by interrupt,
and need be fixed by doing function reset,
but the whole reset flow takes a long time,
should not do it in irq handler,
so do it in scheduled task.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch implements the rx checksum offload feature.
The tx checksum offload processing in .ndo_start_xmit()
has been accepted. This patch also adds the tx checksum
feature, including NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The driver supports many hw statistics. This patch supports
dump statistics through ethtool_ops and ndo.get_stats64().
The type of hw statistics register is u32,
To prevent the statistics register from overflowing,
the driver dump the statistics every 30 seconds.
in a scheduled task.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Lorenzo Bianconi says:
====================
Introduce flowtable hw offloading in airoha_eth driver
Introduce netfilter flowtable integration in airoha_eth driver to
offload 5-tuple flower rules learned by the PPE module if the user
accelerates them using a nft configuration similar to the one reported
below:
table inet filter {
flowtable ft {
hook ingress priority filter
devices = { lan1, lan2, lan3, lan4, eth1 }
flags offload;
}
chain forward {
type filter hook forward priority filter; policy accept;
meta l4proto { tcp, udp } flow add @ft
}
}
Packet Processor Engine (PPE) module available on EN7581 SoC populates
the PPE table with 5-tuples flower rules learned from traffic forwarded
between the GDM ports connected to the Packet Switch Engine (PSE) module.
airoha_eth driver configures and collects data from the PPE module via a
Network Processor Unit (NPU) RISC-V module available on the EN7581 SoC.
Move airoha_eth driver in a dedicated folder
(drivers/net/ethernet/airoha).
v7: https://lore.kernel.org/r/20250224-airoha-en7581-flowtable-offload-v7-0-b4a22ad8364e@kernel.org
v6: https://lore.kernel.org/r/20250221-airoha-en7581-flowtable-offload-v6-0-d593af0e9487@kernel.org
v5: https://lore.kernel.org/r/20250217-airoha-en7581-flowtable-offload-v5-0-28be901cb735@kernel.org
v4: https://lore.kernel.org/r/20250213-airoha-en7581-flowtable-offload-v4-0-b69ca16d74db@kernel.org
v3: https://lore.kernel.org/r/20250209-airoha-en7581-flowtable-offload-v3-0-dba60e755563@kernel.org
v2: https://lore.kernel.org/r/20250207-airoha-en7581-flowtable-offload-v2-0-3a2239692a67@kernel.org
v1: https://lore.kernel.org/r/20250205-airoha-en7581-flowtable-offload-v1-0-d362cfa97b01@kernel.org
====================
Link: https://patch.msgid.link/20250228-airoha-en7581-flowtable-offload-v8-0-01dc1653f46e@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Similar to PPE support for Mediatek devices, introduce PPE debugfs
in order to dump binded and unbinded flows.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Enable hw redirection for traffic received on GDM2 port to GDM{3,4}.
This is required to apply Qdisc offloading (HTB or ETS) for traffic to
and from GDM{3,4} port.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce netfilter flowtable integration in order to allow airoha_eth
driver to offload 5-tuple flower rules learned by the PPE module if the
user accelerates them using a nft configuration similar to the one reported
below:
table inet filter {
flowtable ft {
hook ingress priority filter
devices = { lan1, lan2, lan3, lan4, eth1 }
flags offload;
}
chain forward {
type filter hook forward priority filter; policy accept;
meta l4proto { tcp, udp } flow add @ft
}
}
Tested-by: Sayantan Nandy <sayantan.nandy@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Packet Processor Engine (PPE) module available on EN7581 SoC populates
the PPE table with 5-tuples flower rules learned from traffic forwarded
between the GDM ports connected to the Packet Switch Engine (PSE) module.
The airoha_eth driver can enable hw acceleration of learned 5-tuples
rules if the user configure them in netfilter flowtable (netfilter
flowtable support will be added with subsequent patches).
airoha_eth driver configures and collects data from the PPE module via a
Network Processor Unit (NPU) RISC-V module available on the EN7581 SoC.
Introduce basic support for Airoha NPU module.
Tested-by: Sayantan Nandy <sayantan.nandy@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce the airoha,npu property for the NPU node available on
EN7581 SoC. The airoha Network Processor Unit (NPU) is used to
offload network traffic forwarded between Packet Switch Engine
(PSE) ports.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
