summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-13drm/exynos: fix double call of drm_prime_(init/destroy)_file_privateMandeep Singh Baines
The double invocations are incorrect but seem to be safe so I don't think this will fix any bugs. Before: [ 7.639366] drm_prime_init_file ee3675d0 [ 7.639377] drm_prime_init_file ee3675d0 [ 7.639507] drm_prime_destroy_file ee3675d0 [ 7.639518] drm_prime_destroy_file ee3675d0 [ 7.639802] drm_prime_init_file ee372390 [ 7.639810] drm_prime_init_file ee372390 [ 8.473316] drm_prime_init_file ee356390 [ 8.473331] drm_prime_init_file ee356390 After: [ 6.363842] drm_prime_init_file edc2e5d0 [ 6.363994] drm_prime_destroy_file edc2e5d0 [ 6.364260] drm_prime_init_file edc2e750 [ 8.004837] drm_prime_init_file ee36ded0 Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: add dummy support for dmabuf-mmapTomasz Stanislawski
This patch adds a stub function for DMABUF mmap. This allows to export a DMABUF. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-09-13drm/exynos: Add missing braces around sizeof in exynos_mixer.cSachin Kamat
Fixes the following checkpatch warnings: WARNING: sizeof filter_y_horiz_tap8 should be sizeof(filter_y_horiz_tap8) WARNING: sizeof filter_y_vert_tap4 should be sizeof(filter_y_vert_tap4) WARNING: sizeof filter_cr_horiz_tap4 should be sizeof(filter_cr_horiz_tap4) Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Add missing braces around sizeof in exynos_hdmi.cSachin Kamat
Fixes the following checkpatch warnings: WARNING: sizeof *res should be sizeof(*res) WARNING: sizeof res->regul_bulk[0] should be sizeof(res->regul_bulk[0]) WARNING: sizeof *res should be sizeof(*res) Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Make g2d_pm_ops staticSachin Kamat
Fixes the following warning: drivers/gpu/drm/exynos/exynos_drm_g2d.c:897:1: warning: symbol 'g2d_pm_ops' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Add dependency for G2D in KconfigSachin Kamat
Select Exynos DRM based G2D only if non-DRM based Exynos G2D driver is not selected. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-09-13drm/exynos: fixed page align bug.Inki Dae
do not align in page unit at dumb creation. the align is done by exynos_drm_gem_create() to be called commonly. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1]Thomas Meyer
The semantic patch that makes this change is available in scripts/coccinelle/api/err_cast.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Use devm_* functions in exynos_drm_g2d.c fileSachin Kamat
devm_* functions are device managed functions and make error handling and cleanup cleaner and simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c fileSachin Kamat
devm_kzalloc is a device managed function and makes freeing and error handling simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c fileSachin Kamat
devm_kzalloc is a device managed function and makes freeing and error handling simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Remove redundant check in exynos_drm_fimd.c fileSachin Kamat
devm_request_and_ioremap function checks the validity of the pointer returned by platform_get_resource. Hence an additional check in the probe function is not necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Remove redundant check in exynos_hdmi.c fileSachin Kamat
devm_request_and_ioremap function checks the validity of the pointer returned by platform_get_resource. Hence an additional check in the probe function is not necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13vmwgfx: add dumb ioctl supportDave Airlie
Testing and works with the -modesetting driver, Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13gma500: Remove unused variableEmil Goode
This patch removes a unused struct psb_intel_connector Sparse gives a warning: drivers/gpu/drm/gma500/cdv_intel_hdmi.c:142:30: warning: unused variable ‘psb_intel_connector’ [-Wunused-variable] Signed-off-by: Emil Goode <emilgoode@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13gma500: Fix regression on Oaktrail devicesAlan Cox
The register map patches didn't set one value for the GMA600 which means the Fujitsu Q550 dies on boot with the GMA500 driver enabled. Add the map entry so we don't read from the device MMIO + 0 by mistake. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Horses <stable@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13vmwgfx: remove useless set memory to zero use memset()Wei Yongjun
The memory return by kzalloc() or kmem_cache_zalloc() has already be set to zero, so remove useless memset(0). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13drm: edid: add support for E-DDCShirish S
The current logic for probing ddc is limited to 2 blocks (256 bytes), this patch adds support for the 4 block (512) data. To do this, a single 8-bit segment index is passed to the display via the I2C address 30h. Data from the selected segment is then immediately read via the regular DDC2 address using a repeated I2C 'START' signal. Signed-off-by: Shirish S <s.shirish@samsung.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13drm: Remove unnecessary test for ARM.Robert P. J. Day
Since arch/arm/include/asm/pgtable.h contains: #define io_remap_pfn_range(vma,from,pfn,size,prot) \ remap_pfn_range(vma, from, pfn, size, prot) there is no point treating ARM as a special case in distinguishing between remap_pfn_range() and io_remap_pfn_range(). Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13drm: use %*ph to dump small buffersAndy Shevchenko
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13drm: edid: Refactor HDMI VSDB detectionVille Syrjälä
There are two slightly different pieces of code for HDMI VSDB detection. Unify the code into a single helper function. Also fix a bug where drm_detect_hdmi_monitor() would stop looking for the HDMI VSDB after the first vendor specific block is found, whether or not that block happened to be the HDMI VSDB. The standard allows for any number of vendor specific blocks to be present. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13drm: edid: Add bounds checking to HDMI VSDB parsingVille Syrjälä
The length of HDMI VSDB must be at least 5 bytes. Other than the minimum, nothing else about the length is specified. Check the length before accessing any additional field beyond the minimum length. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13drm: edid: Add some bounds checkingVille Syrjälä
Make sure drm_detect_hdmi_monitor() and drm_detect_monitor_audio() don't access beyond the extension block. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13drm: consistently name interlaced modesRussell King - ARM Linux
At the moment, there is an inconsistency in the way modes are named. Modes with timings parsed from the EDID information will call drm_mode_set_name(), which will name the mode using this form: <horizontal-res>x<vertical-res><interlace-char> eg, 1920x1080i for an interlaced mode, or 1920x1080 for a progressive mode. However, timings parsed using the tables in drm_edid_modes.h do not have the 'i' suffix. You are left to deduce that they're interlaced from xrandr's output by the lower vertical refresh frequencies. This patch changes the interlaced mode names in drm_edid_modes.h to follow the style set by drm_mode_set_name(), which makes it clear in xrandr which modes are interlaced and which are not (as xrandr groups the refresh rates on a line according to the name field.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13drm: make buffer management work without DRM_MASTERDavid Herrmann
DRM users should be able to create/destroy/manage dumb- and frame-buffers without DRM_MASTER. These ioctls do not affect modesetting so there is no reason to protect them by drm-master. Particularly, destroying buffers should always be possible as a client has only access to buffers that they created. Hence, there is no reason to prevent a client from destroying the buffers, considering a simple close() would destroy them, anyway. Furthermore, a display-server currently cannot shutdown correctly if it does not have DRM_MASTER. If some other display-server becomes active (or the kernel console), then the background display-server is unable to destroy its buffers. Under special curcumstances (like monitor reconfiguration) this might even happen during runtime. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13digsig: add hash size comparision on signature verificationDmitry Kasatkin
When pkcs_1_v1_5_decode_emsa() returns without error and hash sizes do not match, hash comparision is not done and digsig_verify_rsa() returns no error. This is a bug and this patch fixes it. The bug was introduced in v3.3 by commit b35e286a640f ("lib/digsig: pkcs_1_v1_5_decode_emsa cleanup"). Cc: stable@vger.kernel.org Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-13Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: "Nothing really major at all: - fixup edp setup sequence (Dave) - disable sdvo hotplug for real, this is a fixup for a messed-up regression fixer (Jani) - don't expose dysfunctional backlight driver (Jani) - properly init spinlock (only used by hsw/vlv code) from Alexander Shishkin" along with a couple of more fixes on top. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: fix up the IBX transcoder B check drm/i915: set the right gen3 flip_done mode also at resume drm/i915: initialize dpio_lock spin lock drm/i915: do not expose a dysfunctional backlight interface to userspace drm/i915: only enable sdvo hotplug irq if needed drm/i915/edp: get the panel delay before powering up
2012-09-13Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "It's been a while... so there's a little more here than normal. Mostly updates from Will for the breakpoint stuff, and plugging a few holes in the user access functions which crept in when domain support was disabled for ARMv7 CPUs." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7529/1: delay: set loops_per_jiffy when moving to timer-based loop ARM: 7528/1: uaccess: annotate [__]{get,put}_user functions with might_fault() ARM: 7527/1: uaccess: explicitly check __user pointer when !CPU_USE_DOMAINS ARM: 7526/1: traps: send SIGILL if get_user fails on undef handling path ARM: 7521/1: Fix semihosting Kconfig text ARM: 7513/1: Make sure dtc is built before running it ARM: 7512/1: Fix XIP build due to PHYS_OFFSET definition moving ARM: 7499/1: mm: Fix vmalloc overlap check for !HIGHMEM ARM: 7503/1: mm: only flush both pmd entries for classic MMU ARM: 7502/1: contextidr: avoid using bfi instruction during notifier ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores ARM: 7497/1: hw_breakpoint: allow single-byte watchpoints on all addresses ARM: 7496/1: hw_breakpoint: don't rely on dfsr to show watchpoint access type ARM: Fix ioremap() of address zero
2012-09-13Merge tag 'nfs-for-3.6-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: - Final (hopefully) fix for the range checking code in NFSv4 getacl. This should fix the Oopses being seen when the acl size is close to PAGE_SIZE. - Fix a regression with the legacy binary mount code - Fix a regression in the readdir cookieverf initialisation - Fix an RPC over UDP regression - Ensure that we report all errors in the NFSv4 open code - Ensure that fsync() reports all relevant synchronisation errors. * tag 'nfs-for-3.6-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: fsync() must exit with an error if page writeback failed SUNRPC: Fix a UDP transport regression NFS: return error from decode_getfh in decode open NFSv4: Fix buffer overflow checking in __nfs4_get_acl_uncached NFSv4: Fix range checking in __nfs4_get_acl_uncached and __nfs4_proc_set_acl NFS: Fix a problem with the legacy binary mount code NFS: Fix the initialisation of the readdir 'cookieverf' array
2012-09-12mtip32xx: fix user_buffer check in exec_drive_commandDavid Milburn
Current user_buffer check is incorrect and causes hdparm to fail # hdparm -I /dev/rssda HDIO_DRIVE_CMD(identify) failed: Input/output error /dev/rssda: Patching linux-3.6-rc5 hdparm works as expected # hdparm -I /dev/rssda /dev/rssda: ATA device, with non-removable media Model Number: DELL_P320h-MTFDGAL350SAH Serial Number: 00000000121302025F01 Firmware Revision: B1442808 <snip> Reported-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-12mtip32xx: Remove dead codeAsai Thambi S P
Removed the dead code in mtip_hw_read_registers() and mtip_hw_read_flags(). Reported-by: Coverity Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-12mtip32xx: Change printk to pr_xxxxAsai Thambi S P
Changed printk to be compliant with latest style changes Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-12mtip32xx: Proper reporting of write protect status on big-endianAsai Thambi S P
Proper reporting of write protect status on big-endian Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-12mtip32xx: Increase timeout for standby commandAsai Thambi S P
Increased timeout for standby command to work with larger capacity drives Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-12mtip32xx: Handle NCQ commands during the security locked stateAsai Thambi S P
Return error for NCQ commands when the drive is in security locked state Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-12mtip32xx: Add support for new devicesAsai Thambi S P
Added supported device IDs in pci table Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-12brcmfmac: Fix big endian host configuration data.Hante Meuleman
Fixes big endian host configuration parameters. Cc: stable <stable@vger.kernel.org> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12brcmfmac: fix big endian bug in i-scan.Hante Meuleman
ssid len is 32 bit and needs endian conversion for big endian systems. Cc: stable <stable@vger.kernel.org> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12rtlwifi: rtl8192ce: Log message that B_CUT device may not workLarry Finger
There are a number of problems that occur for the latest version of the Realtek RTL8188CE device with the in-kernel driver. These include selection of the wrong firmware, and system lockup. A full fix is known, but is too invasive for inclusion in stable. This patch fixes the problem with loading the wrong firmware, and logs a message that the device may not work for kernels 3.6 and older. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Cc: Anisse Astier <anisse@astier.eu> Cc: Li Chaoming <chaoming_li@realsil.com.cn> Tested-by: Anisse Astier <anisse@astier.eu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12Merge branch 'chipidea-stable' into usb-linusGreg Kroah-Hartman
Chipidea patches for 3.6 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-12usb: chipidea: udc: don't stall endpoint if request list is empty in ↵Michael Grzeschik
isr_tr_complete_low When attaching an imx28 or imx53 in USB gadget mode to a Windows host and starting a rndis connection we see this message every 4-10 seconds: g_ether gadget: high speed config #2: RNDIS Analysis shows that each time this message is printed, the rndis connection is re-establish due to a reset because of a stalled endpoint (ep 0, dir 1). The endpoint is stalled because the reqeust complete bit on that endpoint is set, but in isr_tr_complete_low() the endpoint request list (mEp->qh.queue) is empty. This patch removed this check, because the code doesn't take the following situation into account: The loop over all endpoints in isr_tr_complete_handler() will call ep_nuke() on both ep0/dir0 and ep/dir1 in the first loop. Pending reqeusts will be flushed and completed here. There seems to be a race condition, the request is nuked, but the request complete bit will be set, too. The subsequent check (in ep0/dir1's loop cycle) for endpoint request list (mEp->qh.queue) empty will fail. Both other mainline chipidea drivers (mv_udc_core.c and fsl_udc_core.c) don't have this check. Cc: stable <stable@vger.kernel.org> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-12usb: chipidea: cleanup dma_pool if udc_start() failsMarc Kleine-Budde
If udc_start() fails the qh_pool dma-pool cannot be closed because it's still in use. This patch factors out the dma_pool_free() loop into destroy_eps() and calls it in the error path of udc_start(), too. Cc: stable <stable@vger.kernel.org> Reviewed-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-12usb: chipidea: udc: fix error path in udc_start()Marc Kleine-Budde
This patch fixes the error path of udc_start(). Now NULL is used to unset the peripheral with otg_set_peripheral(). Cc: stable <stable@vger.kernel.org> Reviewed-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-12usb: chipidea: udc: add pullup fuction, needed by the uvc gadgetMichael Grzeschik
Add function to physicaly enable or disable of pullup connection on the USB-D+ line. The uvc gaget will fail, if this function is not implemented. Cc: stable <stable@vger.kernel.org> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-12usb: chipidea: udc: fix setup of endpoint maxpacket sizeMichael Grzeschik
This patch changes the setup of the endpoint maxpacket size. All non control endpoints are initialized with an undefined ((unsigned short)~0) maxpacket size. The maxpacket size of Endpoint 0 will be kept at CTRL_PAYLOAD_MAX. Some gadget drivers check for the maxpacket size before they enable the endpoint, which leads to a wrong state in these drivers. Cc: stable <stable@vger.kernel.org> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-12IPoIB: Fix AB-BA deadlock when deleting neighboursShlomo Pongratz
Lockdep points out a circular locking dependency betwwen the ipoib device priv spinlock (priv->lock) and the neighbour table rwlock (ntbl->rwlock). In the normal path, ie neigbour garbage collection task, the neigh table rwlock is taken first and then if the neighbour needs to be deleted, priv->lock is taken. However in some error paths, such as in ipoib_cm_handle_tx_wc(), priv->lock is taken first and then ipoib_neigh_free routine is called which in turn takes the neighbour table ntbl->rwlock. The solution is to get rid the neigh table rwlock completely and use only priv->lock. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-12IPoIB: Fix memory leak in the neigh table deletion flowShlomo Pongratz
If the neighbours hash table is empty when unloading the module, then ipoib_flush_neighs(), the cleanup routine, isn't called and the memory used for the hash table itself leaked. To fix this, ipoib_flush_neighs() is allways called, and another completion object is added to signal when the table is freed. Once invoked, ipoib_flush_neighs() flushes all the neighbours (if there are any), calls the the hash table RCU free routine, which now signals completion of the deletion process, and waits for the last neighbour to be freed. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-12i2c: mxs: correctly setup speed for non devicetreeWolfram Sang
Commit cd4f2d4 (i2c: mxs: Set I2C timing registers for mxs-i2c) only covered the case for devicetree and made platform_data based boards bail out with -EINVAL. Correctly support the latter one, too. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: pnx: Fix read transactions of >= 2 bytesRoland Stigge
On transactions with n>=2 bytes, the controller actually wrongly clocks in n+1 bytes. This is caused by the (wrong) assumption that RFE in the Status Register is 1 iff there is no byte already ordered (via a dummy TX byte). This lead to the implementation of synchronized byte ordering, e.g.: Dummy-TX - RX - Dummy-TX - RX - ... But since RFE actually stays high after some Dummy-TX, it rather looks like: Dummy-TX - Dummy-TX - RX - Dummy-TX - RX - (RX) The last RX byte is clocked in by the bus controller, but ignored by the kernel when filling the userspace buffer. This patch fixes the issue by asking for RX via Dummy-TX asynchronously. Introducing a separate counter for TX bytes. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: pnx: Fix bit definitionsRoland Stigge
The I2C Control Register bits RFDAIE and RFFIE were mixed up. In addition to this fix, this patch adds the missing bit DRSIE for completeness. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
generated by cgit (git 2.34.1) at 2025-09-22 17:22:00 +0000