| Age | Commit message (Collapse) | Author |
|---|
|
Jonathan Heathcote reported a regression caused by blamed commit
on aarch64 architecture.
x86 happens to have irq-safe __this_cpu_add_return()
and __this_cpu_sub(), but this is not generic.
I think my confusion came from "struct sock" argument,
because these helpers are called with a locked socket.
But the memory accounting is per-proto (and per-cpu after
the blamed commit). We might cleanup these helpers later
to directly accept a "struct proto *proto" argument.
Switch to this_cpu_add_return() and this_cpu_xchg()
operations, and get rid of preempt_disable()/preempt_enable() pairs.
Fast path becomes a bit faster as a result :)
Many thanks to Jonathan Heathcote for his awesome report and
investigations.
Fixes: 3cd3399dd7a8 ("net: implement per-cpu reserves for memory_allocated")
Reported-by: Jonathan Heathcote <jonathan.heathcote@bbc.co.uk>
Closes: https://lore.kernel.org/netdev/VI1PR01MB42407D7947B2EA448F1E04EFD10D2@VI1PR01MB4240.eurprd01.prod.exchangelabs.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://lore.kernel.org/r/20240421175248.1692552-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The devm_regulator_get_enable_optional() should be a 'call and forget'
API, meaning, when it is used to enable the regulators, the API does not
provide a handle to do any further control of the regulators. It gives
no real benefit to return an error from the stub if CONFIG_REGULATOR is
not set.
On the contrary, returning an error is causing problems to drivers when
hardware is such it works out just fine with no regulator control.
Returning an error forces drivers to specifically handle the case where
CONFIG_REGULATOR is not set, making the mere existence of the stub
questionalble.
Change the stub implementation for the
devm_regulator_get_enable_optional() to return Ok so drivers do not
separately handle the case where the CONFIG_REGULATOR is not set.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: da279e6965b3 ("regulator: Add devm helpers for get and enable")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/ZiedtOE00Zozd3XO@fedora
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This commit was a pre-requisite for commit c1ccfcf1a9bf ("NFSD:
Reschedule CB operations when backchannel rpc_clnt is shut down"),
which has already been reverted.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The reverted commit attempted to enable NFSD to retransmit pending
callback operations if an NFS client disconnects, but
unintentionally introduces a hazardous behavior regression if the
client becomes permanently unreachable while callback operations are
still pending.
A disconnect can occur due to network partition or if the NFS server
needs to force the NFS client to retransmit (for example, if a GSS
window under-run occurs).
Reverting the commit will make NFSD behave the same as it did in
v6.8 and before. Pending callback operations are permanently lost if
the client connection is terminated before the client receives them.
For some callback operations, this loss is not harmful.
However, for CB_RECALL, the loss means a delegation might be revoked
unnecessarily. For CB_OFFLOAD, pending COPY operations will never
complete unless the NFS client subsequently sends an OFFLOAD_STATUS
operation, which the Linux NFS client does not currently implement.
These issues still need to be addressed somehow.
Reported-by: Dai Ngo <dai.ngo@oracle.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218735
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit 073237281a50 ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT
UUID for non-AMD systems") attempted to avoid evaluating the same Low-
Power S0 Idle _DSM functions for different UUIDs, but that turns out to
be a mistake, because some systems in the field are adversely affected
by it.
Address this by allowing all Low-Power S0 Idle _DSM functions to be
evaluated, but still print the message regarding duplication of Low-
Power S0 Idle _DSM function sets for different UUIDs.
Fixes: 073237281a50 ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT UUID for non-AMD systems")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218750
Reported-and-tested-by: Mark Pearson <mpearson@lenovo.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Pull smb client fixes from Steve French:
- fscache fix
- fix for case where we could use uninitialized lease
- add tracepoint for debugging refcounting of tcon
- fix mount option regression (e.g. forceuid vs. noforceuid when uid=
specified) caused by conversion to the new mount API
* tag '6.9-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: reinstate original behavior again for forceuid/forcegid
smb: client: fix rename(2) regression against samba
cifs: Add tracing for the cifs_tcon struct refcounting
cifs: Fix reacquisition of volume cookie on still-live connection
|
|
With cpu_possible_mask=0-63 and cpu_online_mask=0-7 the following
kernel oops was observed:
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 8 CPUs
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 0000000000000803
[..]
Call Trace:
arch_vcpu_is_preempted+0x12/0x80
select_idle_sibling+0x42/0x560
select_task_rq_fair+0x29a/0x3b0
try_to_wake_up+0x38e/0x6e0
kick_pool+0xa4/0x198
__queue_work.part.0+0x2bc/0x3a8
call_timer_fn+0x36/0x160
__run_timers+0x1e2/0x328
__run_timer_base+0x5a/0x88
run_timer_softirq+0x40/0x78
__do_softirq+0x118/0x388
irq_exit_rcu+0xc0/0xd8
do_ext_irq+0xae/0x168
ext_int_handler+0xbe/0xf0
psw_idle_exit+0x0/0xc
default_idle_call+0x3c/0x110
do_idle+0xd4/0x158
cpu_startup_entry+0x40/0x48
rest_init+0xc6/0xc8
start_kernel+0x3c4/0x5e0
startup_continue+0x3c/0x50
The crash is caused by calling arch_vcpu_is_preempted() for an offline
CPU. To avoid this, select the cpu with cpumask_any_and_distribute()
to mask __pod_cpumask with cpu_online_mask. In case no cpu is left in
the pool, skip the assignment.
tj: This doesn't fully fix the bug as CPUs can still go down between picking
the target CPU and the wake call. Fixing that likely requires adding
cpu_online() test to either the sched or s390 arch code. However, regardless
of how that is fixed, workqueue shouldn't be picking a CPU which isn't
online as that would result in unpredictable and worse behavior.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Fixes: 8639ecebc9b1 ("workqueue: Implement non-strict affinity scope for unbound workqueues")
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The current definition yields a negative 32bits signed value which
result in a mask with is obviously incorrect. Replace it by using a
1ULL bit shift value to obtain a single set bit mask.
Fixes: 5dadda5e6a59 ("riscv: hwprobe: export Zvfh[min] ISA extensions")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240409143839.558784-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
NLMSG_DONE contains an error code, it has to be extracted.
Prior to this change all dumps will end in success,
and in case of failure the result is silently truncated.
Fixes: e4b48ed460d3 ("tools: ynl: add a completely generic client")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240420020827.3288615-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The mtk-socinfo driver uses symbols 'soc_device_register' and
'soc_device_unregister' which are part of the bus driver for
System-on-Chip devices.
Select SOC_BUS to make sure that driver is built and the symbols are
available.
Fixes: 423a54da3c7e ("soc: mediatek: mtk-socinfo: Add driver for getting chip information")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/cc8f7f7da5bdccce514a320e0ae7468659cf7346.1707327680.git.daniel@makrotopia.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The thermal framework registers thermal zones as specified in DT and
including the "-thermal" suffix: append that to the driver specified
tzone_name to actually match the thermal zone name as registered by
the thermal API.
Fixes: 2bfbf82956e2 ("soc: mediatek: mtk-svs: Constify runtime-immutable members of svs_bank")
Link: https://lore.kernel.org/r/20240318113237.125802-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The dev_tracker is added to ax25_cb in ax25_bind(). When the
ax25 device is detaching, the dev_tracker of ax25_cb should be
deallocated in ax25_kill_by_device() instead of the dev_tracker
of ax25_dev. The log reported by ref_tracker is shown below:
[ 80.884935] ref_tracker: reference already released.
[ 80.885150] ref_tracker: allocated in:
[ 80.885349] ax25_dev_device_up+0x105/0x540
[ 80.885730] ax25_device_event+0xa4/0x420
[ 80.885730] notifier_call_chain+0xc9/0x1e0
[ 80.885730] __dev_notify_flags+0x138/0x280
[ 80.885730] dev_change_flags+0xd7/0x180
[ 80.885730] dev_ifsioc+0x6a9/0xa30
[ 80.885730] dev_ioctl+0x4d8/0xd90
[ 80.885730] sock_do_ioctl+0x1c2/0x2d0
[ 80.885730] sock_ioctl+0x38b/0x4f0
[ 80.885730] __se_sys_ioctl+0xad/0xf0
[ 80.885730] do_syscall_64+0xc4/0x1b0
[ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 80.885730] ref_tracker: freed in:
[ 80.885730] ax25_device_event+0x272/0x420
[ 80.885730] notifier_call_chain+0xc9/0x1e0
[ 80.885730] dev_close_many+0x272/0x370
[ 80.885730] unregister_netdevice_many_notify+0x3b5/0x1180
[ 80.885730] unregister_netdev+0xcf/0x120
[ 80.885730] sixpack_close+0x11f/0x1b0
[ 80.885730] tty_ldisc_kill+0xcb/0x190
[ 80.885730] tty_ldisc_hangup+0x338/0x3d0
[ 80.885730] __tty_hangup+0x504/0x740
[ 80.885730] tty_release+0x46e/0xd80
[ 80.885730] __fput+0x37f/0x770
[ 80.885730] __x64_sys_close+0x7b/0xb0
[ 80.885730] do_syscall_64+0xc4/0x1b0
[ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f
[ 80.893739] ------------[ cut here ]------------
[ 80.894030] WARNING: CPU: 2 PID: 140 at lib/ref_tracker.c:255 ref_tracker_free+0x47b/0x6b0
[ 80.894297] Modules linked in:
[ 80.894929] CPU: 2 PID: 140 Comm: ax25_conn_rel_6 Not tainted 6.9.0-rc4-g8cd26fd90c1a #11
[ 80.895190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qem4
[ 80.895514] RIP: 0010:ref_tracker_free+0x47b/0x6b0
[ 80.895808] Code: 83 c5 18 4c 89 eb 48 c1 eb 03 8a 04 13 84 c0 0f 85 df 01 00 00 41 83 7d 00 00 75 4b 4c 89 ff 9
[ 80.896171] RSP: 0018:ffff888009edf8c0 EFLAGS: 00000286
[ 80.896339] RAX: 1ffff1100141ac00 RBX: 1ffff1100149463b RCX: dffffc0000000000
[ 80.896502] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff88800a0d6518
[ 80.896925] RBP: ffff888009edf9b0 R08: ffff88806d3288d3 R09: 1ffff1100da6511a
[ 80.897212] R10: dffffc0000000000 R11: ffffed100da6511b R12: ffff88800a4a31d4
[ 80.897859] R13: ffff88800a4a31d8 R14: dffffc0000000000 R15: ffff88800a0d6518
[ 80.898279] FS: 00007fd88b7fe700(0000) GS:ffff88806d300000(0000) knlGS:0000000000000000
[ 80.899436] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 80.900181] CR2: 00007fd88c001d48 CR3: 000000000993e000 CR4: 00000000000006f0
...
[ 80.935774] ref_tracker: sp%d@000000000bb9df3d has 1/1 users at
[ 80.935774] ax25_bind+0x424/0x4e0
[ 80.935774] __sys_bind+0x1d9/0x270
[ 80.935774] __x64_sys_bind+0x75/0x80
[ 80.935774] do_syscall_64+0xc4/0x1b0
[ 80.935774] entry_SYSCALL_64_after_hwframe+0x67/0x6f
Change ax25_dev->dev_tracker to the dev_tracker of ax25_cb
in order to mitigate the bug.
Fixes: feef318c855a ("ax25: fix UAF bugs of net_device caused by rebinding operation")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20240419020456.29826-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If the eeprom is not accessible, an nvmem device will be registered, the
read will fail, and the device will be torn down. If another driver
accesses the nvmem device after the teardown, it will reference
invalid memory.
Move the failure point before registering the nvmem device.
Signed-off-by: Daniel Okazaki <dtokazaki@google.com>
Fixes: b20eb4c1f026 ("eeprom: at24: drop unnecessary label")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240422174337.2487142-1-dtokazaki@google.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Fix the error return in netfs_perform_write() acting in writethrough-mode
to return any cached error in the case that netfs_end_writethrough()
returns 0.
This can affect the use of O_SYNC/O_DSYNC/RWF_SYNC/RWF_DSYNC in 9p and afs.
Fixes: 41d8e7673a77 ("netfs: Implement a write-through caching option")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/6736.1713343639@warthog.procyon.org.uk
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
To ensure that ioctl()s can't be used to circumvent write restrictions.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Ensure that ntfs3 is mounted read-only when it is used to provide the
legacy ntfs driver.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The devm_regulator_get_enable() should be a 'call and forget' API,
meaning, when it is used to enable the regulators, the API does not
provide a handle to do any further control of the regulators. It gives
no real benefit to return an error from the stub if CONFIG_REGULATOR is
not set.
On the contrary, returning and error is causing problems to drivers when
hardware is such it works out just fine with no regulator control.
Returning an error forces drivers to specifically handle the case where
CONFIG_REGULATOR is not set, making the mere existence of the stub
questionalble. Furthermore, the stub of the regulator_enable() seems to
be returning Ok.
Change the stub implementation for the devm_regulator_get_enable() to
return Ok so drivers do not separately handle the case where the
CONFIG_REGULATOR is not set.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reported-by: Aleksander Mazur <deweloper@wp.pl>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: da279e6965b3 ("regulator: Add devm helpers for get and enable")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/ZiYF6d1V1vSPcsJS@drtxq0yyyyyyyyyyyyyby-3.rev.dnainternet.fi
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull smb server fixes from Steve French:
"Five ksmbd server fixes, most also for stable:
- rename fix
- two fixes for potential out of bounds
- fix for connections from MacOS (padding in close response)
- fix for when to enable persistent handles"
* tag '6.9-rc5-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: add continuous availability share parameter
ksmbd: common: use struct_group_attr instead of struct_group for network_open_info
ksmbd: clear RENAME_NOREPLACE before calling vfs_rename
ksmbd: validate request buffer size in smb2_allocate_rsp_buf()
ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf
|
|
When KUnit tests are enabled, under very big kernel configurations
(e.g. `allyesconfig`), we can trigger a `rustdoc` ICE [1]:
RUSTDOC TK rust/kernel/lib.rs
error: the compiler unexpectedly panicked. this is a bug.
The reason is that this build step has a duplicated `@rustc_cfg` argument,
which contains the kernel configuration, and thus a lot of arguments. The
factor 2 happens to be enough to reach the ICE.
Thus remove the unneeded `@rustc_cfg`. By doing so, we clean up the
command and workaround the ICE.
The ICE has been fixed in the upcoming Rust 1.79 [2].
Cc: stable@vger.kernel.org
Fixes: a66d733da801 ("rust: support running Rust documentation tests as KUnit ones")
Link: https://github.com/rust-lang/rust/issues/122722 [1]
Link: https://github.com/rust-lang/rust/pull/122840 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240422091215.526688-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The thread that calls the module initialisation code when a module is
loaded is not guaranteed [in fact, it is unlikely] to be the same one
that calls the module cleanup code on module unload, therefore, `Module`
implementations must be `Send` to account for them moving from one
thread to another implicitly.
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Cc: stable@vger.kernel.org # 6.8.x: df70d04d5697: rust: phy: implement `Send` for `Registration`
Cc: stable@vger.kernel.org
Fixes: 247b365dc8dc ("rust: add `kernel` crate")
Link: https://lore.kernel.org/r/20240328195457.225001-3-wedsonaf@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
In preparation for requiring `Send` for `Module` implementations in the
next patch.
Cc: FUJITA Tomonori <fujita.tomonori@gmail.com>
Cc: Trevor Gross <tmgross@umich.edu>
Cc: netdev@vger.kernel.org
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240328195457.225001-2-wedsonaf@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
During module probe, regulator 'vin' and 'vdd-io' are used and enabled,
but the vdd-io regulator overwrites the 'vin' regulator pointer. During
remove, only the vdd-io is disabled, as the vin regulator pointer is not
available anymore. When regulator_put() is called during resource
cleanup a kernel warning is given, as the regulator is still enabled.
Store the two regulators in separate pointers and disable both the
regulators on module remove.
Fixes: 49d22c70aaf0 ("NFC: trf7970a: Add device tree option of 1.8 Volt IO voltage")
Signed-off-by: Paul Geurts <paul_geurts@live.nl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/DB7PR09MB26847A4EBF88D9EDFEB1DA0F950E2@DB7PR09MB2684.eurprd09.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current maintainer Douglas Miller has left IBM and no replacement has
been assigned for the driver. The eHEA hardware was last used on
IBM POWER7 systems, the last of which reached end-of-support at the
end of 2020.
Signed-off-by: David Christensen <drc@linux.ibm.com>
Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20240418195517.528577-1-drc@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit cleans up the uapi for vhost_vdpa by
better naming some of the enums which report blk
information to user space, and they are not
in any official releases yet.
Fixes: 1ac61ddfee93 ("vDPA: report virtio-blk flush info to user space")
Fixes: ae1374b7f72c ("vDPA: report virtio-block read-only info to user space")
Fixes: 330b8aea6924 ("vDPA: report virtio-block max segment size to user space")
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20240415111047.1047774-1-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Pull bcachefs fixes from Kent Overstreet:
"Nothing too crazy in this one, and it looks like (fingers crossed) the
recovery and repair issues are settling down - although there's going
to be a long tail there, as we've still yet to really ramp up on error
injection or syzbot.
- fix a few more deadlocks in recovery
- fix u32/u64 issues in mi_btree_bitmap
- btree key cache shrinker now actually frees, with more
instrumentation coming so we can verify that it's working
correctly more easily in the future"
* tag 'bcachefs-2024-04-22' of https://evilpiepirate.org/git/bcachefs:
bcachefs: If we run merges at a lower watermark, they must be nonblocking
bcachefs: Fix inode early destruction path
bcachefs: Fix deadlock in journal write path
bcachefs: Tweak btree key cache shrinker so it actually frees
bcachefs: bkey_cached.btree_trans_barrier_seq needs to be a ulong
bcachefs: Fix missing call to bch2_fs_allocator_background_exit()
bcachefs: Check for journal entries overruning end of sb clean section
bcachefs: Fix bio alloc in check_extent_checksum()
bcachefs: fix leak in bch2_gc_write_reflink_key
bcachefs: KEY_TYPE_error is allowed for reflink
bcachefs: Fix bch2_dev_btree_bitmap_marked_sectors() shift
bcachefs: make sure to release last journal pin in replay
bcachefs: node scan: ignore multiple nodes with same seq if interior
bcachefs: Fix format specifier in validate_bset_keys()
bcachefs: Fix null ptr deref in twf from BCH_IOCTL_FSCK_OFFLINE
|
|
mv88e6250_phylink_get_caps()
With the recent PHYLINK changes requiring supported_interfaces to be set,
MV88E6250 family switches like the 88E6020 fail to probe - cmode is
never initialized on these devices, so mv88e6250_phylink_get_caps() does
not set any supported_interfaces flags.
Instead of a cmode, on 88E6250 we have a read-only port mode value that
encodes similar information. There is no reason to bother mapping port
mode to the cmodes of other switch models; instead we introduce a
mv88e6250_setup_supported_interfaces() that is called directly from
mv88e6250_phylink_get_caps().
Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240417103737.166651-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix an NFS/RDMA performance regression in v6.9-rc
* tag 'nfsd-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "svcrdma: Add Write chunk WRs to the RPC's Send WR chain"
|
|
When redirecting a packet using XDP, the bpf_redirect_map() helper will set
up the redirect destination information in struct bpf_redirect_info (using
the __bpf_xdp_redirect_map() helper function), and the xdp_do_redirect()
function will read this information after the XDP program returns and pass
the frame on to the right redirect destination.
When using the BPF_F_BROADCAST flag to do multicast redirect to a whole
map, __bpf_xdp_redirect_map() sets the 'map' pointer in struct
bpf_redirect_info to point to the destination map to be broadcast. And
xdp_do_redirect() reacts to the value of this map pointer to decide whether
it's dealing with a broadcast or a single-value redirect. However, if the
destination map is being destroyed before xdp_do_redirect() is called, the
map pointer will be cleared out (by bpf_clear_redirect_map()) without
waiting for any XDP programs to stop running. This causes xdp_do_redirect()
to think that the redirect was to a single target, but the target pointer
is also NULL (since broadcast redirects don't have a single target), so
this causes a crash when a NULL pointer is passed to dev_map_enqueue().
To fix this, change xdp_do_redirect() to react directly to the presence of
the BPF_F_BROADCAST flag in the 'flags' value in struct bpf_redirect_info
to disambiguate between a single-target and a broadcast redirect. And only
read the 'map' pointer if the broadcast flag is set, aborting if that has
been cleared out in the meantime. This prevents the crash, while keeping
the atomic (cmpxchg-based) clearing of the map pointer itself, and without
adding any more checks in the non-broadcast fast path.
Fixes: e624d4ed4aa8 ("xdp: Extend xdp_redirect_map with broadcast support")
Reported-and-tested-by: syzbot+af9492708df9797198d6@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20240418071840.156411-1-toke@redhat.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
commit 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system
memory accesses") modified cpc_read()/cpc_write() to use access_width to
read CPC registers.
However, for PCC registers the access width field in the ACPI register
macro specifies the PCC subspace ID. For non-zero PCC subspace ID it is
incorrectly treated as access width. This causes errors when reading
from PCC registers in the CPPC driver.
For PCC registers, base the size of read/write on the bit width field.
The debug message in cpc_read()/cpc_write() is updated to print relevant
information for the address space type used to read the register.
Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Tested-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for
system memory accesses") neglected to properly wrap the bit_offset shift
when it comes to applying the mask. This may cause incorrect values to be
read and may cause the cpufreq module not be loaded.
[ 11.059751] cpu_capacity: CPU0 missing/invalid highest performance.
[ 11.066005] cpu_capacity: partial information: fallback to 1024 for all CPUs
Also, corrected the bitmask generation in GENMASK (extra bit being added).
Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Jarred White <jarredwhite@linux.microsoft.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Reviewed-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull documentation fixes from Jonathan Corbet:
"A set of updates from Thorsten to his (new) guide to verifying bugs
and tracking down regressions"
* tag 'docs-6.9-fixes2' of git://git.lwn.net/linux:
docs: verify/bisect: stable regressions: first stable, then mainline
docs: verify/bisect: describe how to use a build host
docs: verify/bisect: explain testing reverts, patches and newer code
docs: verify/bisect: proper headlines and more spacing
docs: verify/bisect: add and fetch stable branches ahead of time
docs: verify/bisect: use git switch, tag kernel, and various fixes
|
|
The MWAITX and MONITORX instructions generate the same #VC error code as
the MWAIT and MONITOR instructions, respectively. Update the #VC handler
opcode checking to also support the MWAITX and MONITORX opcodes.
Fixes: e3ef461af35a ("x86/sev: Harden #VC instruction emulation somewhat")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/453d5a7cfb4b9fe818b6fb67f93ae25468bc9e23.1713793161.git.thomas.lendacky@amd.com
|
|
A recent change to cxl_mem_get_records_log() [1] highlighted a subtle
nuance of looping calls to cxl_internal_send_cmd(), i.e. that
cxl_internal_send_cmd() modifies the 'size_out' member of the @mbox_cmd
argument. That mechanism is useful for communicating underflow, but it
is unwanted when reusing @mbox_cmd for a subsequent submission. It turns
out that cxl_xfer_log() avoids this scenario by always redefining
@mbox_cmd each iteration.
Update cxl_mem_get_records_log() and cxl_mem_get_poison() to follow the
same style as cxl_xfer_log(), i.e. re-define @mbox_cmd each iteration.
The cxl_mem_get_records_log() change is just a style fixup, but the
cxl_mem_get_poison() change is a potential fix, per Alison [2]:
Poison list retrieval can hit this case if the MORE flag is set and
a follow on read of the list delivers more records than the previous
read. ie. device gives one record, sets the _MORE flag, then gives 5.
Not an urgent fix since this behavior has not been seen in the wild,
but worth tracking as a fix.
Cc: Kwangjin Ko <kwangjin.ko@sk.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Fixes: ed83f7ca398b ("cxl/mbox: Add GET_POISON_LIST mailbox command")
Link: http://lore.kernel.org/r/20240402081404.1106-2-kwangjin.ko@sk.com [1]
Link: http://lore.kernel.org/r/ZhAhAL/GOaWFrauw@aschofie-mobl2 [2]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/171235441633.2716581.12330082428680958635.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
forceuid/forcegid should be enabled by default when uid=/gid= options are
specified, but commit 24e0a1eff9e2 ("cifs: switch to new mount api")
changed the behavior. Due to the change, a mounted share does not show
intentional uid/gid for files and directories even though uid=/gid=
options are specified since forceuid/forcegid are not enabled.
This patch reinstates original behavior that overrides uid/gid with
specified uid/gid by the options.
Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api")
Signed-off-by: Takayuki Nagata <tnagata@redhat.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Detect and mitigate inode collsions that now occur since we
fixed 9p generating duplicate inode structures. Underlying
cause of these appears to be a race condition between reuse
of inode numbers in underlying file system and cleanup of
inode numbers in the client. Enabling caching
makes this much more likely to happen as it increases cleanup
latency due to writebacks.
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
|
|
The current implementation of the mov instruction with sign extension has the
following problems:
1. It clobbers the source register if it is not stacked because it
sign extends the source and then moves it to the destination.
2. If the dst_reg is stacked, the current code doesn't write the value
back in case of 64-bit mov.
3. There is room for improvement by emitting fewer instructions.
The steps for fixing this and the instructions emitted by the JIT are explained
below with examples in all combinations:
Case A: offset == 32:
=====================
Case A.1: src and dst are stacked registers:
--------------------------------------------
1. Load src_lo into tmp_lo
2. Store tmp_lo into dst_lo
3. Sign extend tmp_lo into tmp_hi
4. Store tmp_hi to dst_hi
Example: r3 = (s32)r3
r3 is a stacked register
ldr r6, [r11, #-16] // Load r3_lo into tmp_lo
// str to dst_lo is not emitted because src_lo == dst_lo
asr r7, r6, #31 // Sign extend tmp_lo into tmp_hi
str r7, [r11, #-12] // Store tmp_hi into r3_hi
Case A.2: src is stacked but dst is not:
----------------------------------------
1. Load src_lo into dst_lo
2. Sign extend dst_lo into dst_hi
Example: r6 = (s32)r3
r6 maps to {ARM_R5, ARM_R4} and r3 is stacked
ldr r4, [r11, #-16] // Load r3_lo into r6_lo
asr r5, r4, #31 // Sign extend r6_lo into r6_hi
Case A.3: src is not stacked but dst is stacked:
------------------------------------------------
1. Store src_lo into dst_lo
2. Sign extend src_lo into tmp_hi
3. Store tmp_hi to dst_hi
Example: r3 = (s32)r6
r3 is stacked and r6 maps to {ARM_R5, ARM_R4}
str r4, [r11, #-16] // Store r6_lo to r3_lo
asr r7, r4, #31 // Sign extend r6_lo into tmp_hi
str r7, [r11, #-12] // Store tmp_hi to dest_hi
Case A.4: Both src and dst are not stacked:
-------------------------------------------
1. Mov src_lo into dst_lo
2. Sign extend src_lo into dst_hi
Example: (bf) r6 = (s32)r6
r6 maps to {ARM_R5, ARM_R4}
// Mov not emitted because dst == src
asr r5, r4, #31 // Sign extend r6_lo into r6_hi
Case B: offset != 32:
=====================
Case B.1: src and dst are stacked registers:
--------------------------------------------
1. Load src_lo into tmp_lo
2. Sign extend tmp_lo according to offset.
3. Store tmp_lo into dst_lo
4. Sign extend tmp_lo into tmp_hi
5. Store tmp_hi to dst_hi
Example: r9 = (s8)r3
r9 and r3 are both stacked registers
ldr r6, [r11, #-16] // Load r3_lo into tmp_lo
lsl r6, r6, #24 // Sign extend tmp_lo
asr r6, r6, #24 // ..
str r6, [r11, #-56] // Store tmp_lo to r9_lo
asr r7, r6, #31 // Sign extend tmp_lo to tmp_hi
str r7, [r11, #-52] // Store tmp_hi to r9_hi
Case B.2: src is stacked but dst is not:
----------------------------------------
1. Load src_lo into dst_lo
2. Sign extend dst_lo according to offset.
3. Sign extend tmp_lo into dst_hi
Example: r6 = (s8)r3
r6 maps to {ARM_R5, ARM_R4} and r3 is stacked
ldr r4, [r11, #-16] // Load r3_lo to r6_lo
lsl r4, r4, #24 // Sign extend r6_lo
asr r4, r4, #24 // ..
asr r5, r4, #31 // Sign extend r6_lo into r6_hi
Case B.3: src is not stacked but dst is stacked:
------------------------------------------------
1. Sign extend src_lo into tmp_lo according to offset.
2. Store tmp_lo into dst_lo.
3. Sign extend src_lo into tmp_hi.
4. Store tmp_hi to dst_hi.
Example: r3 = (s8)r1
r3 is stacked and r1 maps to {ARM_R3, ARM_R2}
lsl r6, r2, #24 // Sign extend r1_lo to tmp_lo
asr r6, r6, #24 // ..
str r6, [r11, #-16] // Store tmp_lo to r3_lo
asr r7, r6, #31 // Sign extend tmp_lo to tmp_hi
str r7, [r11, #-12] // Store tmp_hi to r3_hi
Case B.4: Both src and dst are not stacked:
-------------------------------------------
1. Sign extend src_lo into dst_lo according to offset.
2. Sign extend dst_lo into dst_hi.
Example: r6 = (s8)r1
r6 maps to {ARM_R5, ARM_R4} and r1 maps to {ARM_R3, ARM_R2}
lsl r4, r2, #24 // Sign extend r1_lo to r6_lo
asr r4, r4, #24 // ..
asr r5, r4, #31 // Sign extend r6_lo to r6_hi
Fixes: fc832653fa0d ("arm32, bpf: add support for sign-extension mov instruction")
Reported-by: syzbot+186522670e6722692d86@syzkaller.appspotmail.com
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Closes: https://lore.kernel.org/all/000000000000e9a8d80615163f2a@google.com
Link: https://lore.kernel.org/bpf/20240419182832.27707-1-puranjay@kernel.org
|
|
Michael Chan says:
====================
bnxt_en: AER fixes
This patchset fixes issues in the AER recovery logic. The first patch
refactors the code to make a shutdown function available for AER fatal
errors. The second patch fixes the AER fatal recovery logic. The
third patch fixes the health register logic to fix AER recovery failure
for the new P7 chips.
====================
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
|
|
During error recovery, such as AER fatal error slot reset, we call
bnxt_try_map_fw_health_reg() to try to get access to the health
register to determine the firmware state. Fix
bnxt_try_map_fw_health_reg() to recognize the P7 chip correctly
and set up the health register.
This fixes this type of AER slot reset failure:
bnxt_en 0000:04:00.0: AER: PCIe Bus Error: severity=Uncorrectable (Fatal), type=Inaccessible, (Unregistered Agent ID)
bnxt_en 0000:04:00.0 enp4s0f0np0: PCI I/O error detected
bnxt_en 0000:04:00.0 bnxt_re0: Handle device suspend call
bnxt_en 0000:04:00.1 enp4s0f1np1: PCI I/O error detected
bnxt_en 0000:04:00.1 bnxt_re1: Handle device suspend call
pcieport 0000:00:02.0: AER: Root Port link has been reset (0)
bnxt_en 0000:04:00.0 enp4s0f0np0: PCI Slot Reset
bnxt_en 0000:04:00.0: enabling device (0000 -> 0002)
bnxt_en 0000:04:00.0: Firmware not ready
bnxt_en 0000:04:00.1 enp4s0f1np1: PCI Slot Reset
bnxt_en 0000:04:00.1: enabling device (0000 -> 0002)
bnxt_en 0000:04:00.1: Firmware not ready
pcieport 0000:00:02.0: AER: device recovery failed
Fixes: a432a45bdba4 ("bnxt_en: Define basic P7 macros")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We do not support two simultaneous recoveries so check for reset
flag, BNXT_STATE_IN_FW_RESET, and do not proceed with AER further.
When the pci channel state is pci_channel_io_frozen, the PCIe link
can not be trusted so we disable the traffic immediately and stop
BAR access by calling bnxt_fw_fatal_close(). BAR access after
AER fatal error can cause an NMI.
Fixes: f75d9a0aa967 ("bnxt_en: Re-write PCI BARs after PCI fatal error.")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce bnxt_fw_fatal_close() API which can be used
to stop data path and disable device when firmware
is in fatal state.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It was possible to have pick_eevdf() return NULL, which then causes a
NULL-deref. This turned out to be due to entity_eligible() returning
falsely negative because of a s64 multiplcation overflow.
Specifically, reweight_eevdf() computes the vlag without considering
the limit placed upon vlag as update_entity_lag() does, and then the
scaling multiplication (remember that weight is 20bit fixed point) can
overflow. This then leads to the new vruntime being weird which then
causes the above entity_eligible() to go side-ways and claim nothing
is eligible.
Thus limit the range of vlag accordingly.
All this was quite rare, but fatal when it does happen.
Closes: https://lore.kernel.org/all/ZhuYyrh3mweP_Kd8@nz.home/
Closes: https://lore.kernel.org/all/CA+9S74ih+45M_2TPUY_mPPVDhNvyYfy1J1ftSix+KjiTVxg8nw@mail.gmail.com/
Closes: https://lore.kernel.org/lkml/202401301012.2ed95df0-oliver.sang@intel.com/
Fixes: eab03c23c2a1 ("sched/eevdf: Fix vruntime adjustment on reweight")
Reported-by: Sergei Trofimovich <slyich@gmail.com>
Reported-by: Igor Raits <igor@gooddata.com>
Reported-by: Breno Leitao <leitao@debian.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Reviewed-and-tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240422082238.5784-1-xuewen.yan@unisoc.com
|
|
reweight_eevdf() only keeps V unchanged inside itself. When se !=
cfs_rq->curr, it would be dequeued from rb tree first. So that V is
changed and the result is wrong. Pass the original V to reweight_eevdf()
to fix this issue.
Fixes: eab03c23c2a1 ("sched/eevdf: Fix vruntime adjustment on reweight")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
[peterz: flip if() condition for clarity]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Abel Wu <wuyun.abel@bytedance.com>
Link: https://lkml.kernel.org/r/20240306022133.81008-3-dtcccc@linux.alibaba.com
|
|
reweight_eevdf() needs the latest V to do accurate calculation for new
ve and vd. So update V unconditionally when se is runnable.
Fixes: eab03c23c2a1 ("sched/eevdf: Fix vruntime adjustment on reweight")
Suggested-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Abel Wu <wuyun.abel@bytedance.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Link: https://lore.kernel.org/r/20240306022133.81008-2-dtcccc@linux.alibaba.com
|
|
br_info_notify is a void function. There is no need to return.
Fixes: b6d0425b816e ("bridge: cfm: Netlink Notifications.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define my kernel.org address to be the canonical one, and add mailmap
entries for the various addresses (including typos) that have been
used over the years.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
First problem is a double call to __in_dev_get_rcu(), because
the second one could return NULL.
if (__in_dev_get_rcu(dev) && __in_dev_get_rcu(dev)->ifa_list)
Second problem is a read from dev->ip6_ptr with no NULL check:
if (!list_empty(&rcu_dereference(dev->ip6_ptr)->addr_list))
Use the correct RCU API to fix these.
v2: add missing include <net/addrconf.h>
Fixes: d329ea5bd884 ("icmp: add response to RFC 8335 PROBE messages")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the following Telit FN920C04 compositions:
0x10a0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag)
T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a0 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=92c4c4d8
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10a4: rmnet + tty (AT) + tty (AT) + tty (diag)
T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a4 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=92c4c4d8
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10a9: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb
T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a9 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=92c4c4d8
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT
source at the same time") removed the setup of TINT from
rzg2l_irqc_irq_enable(). To address the spurious interrupt issue the
setup of TINT has been moved in rzg2l_tint_set_edge() through
rzg2l_disable_tint_and_set_tint_source(). With this, the interrupts are
not properly re-configured after a suspend-to-RAM cycle. To address
this issue and avoid spurious interrupts while resumming set the
interrupt type before enabling it.
Fixes: dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240419063822.3467424-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
On older (pre-MLD API) devices, we started also calling
iwl_mvm_set_link_mapping()/iwl_mvm_unset_link_mapping(),
but of course not also iwl_mvm_remove_link(). Since the
link ID was only released in iwl_mvm_remove_link() this
causes us to run out of FW link IDs very quickly. Fix
it by releasing the link ID correctly.
Fixes: a8b5d4809b50 ("wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW")
Link: https://msgid.link/20240420154435.dce72db5d5e3.Ic40b454b24f1c7b380a1eedf67455d9cf2f58541@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix another deadlock related to the merge path; previously, we switched
to always running merges at a lower watermark (because they are
noncritical); but when we run at a lower watermark we also need to run
nonblocking or we've introduced a new deadlock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-and-tested-by: s@m-h.ug
|
