summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-11-06powerpc/mm: Add a CONFIG option to choose if radix is used by defaultMichael Ellerman
Currently if the hardware supports the radix MMU we will use it, *unless* "disable_radix" is passed on the kernel command line. However some users would like the reverse semantics. ie. The kernel uses the hash MMU by default, unless radix is explicitly requested on the command line. So add a CONFIG option to choose whether we use radix by default or not, and expand the disable_radix command line option to allow "disable_radix=no" which *enables* radix. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/64s: Replace CONFIG_PPC_STD_MMU_64 with CONFIG_PPC_BOOK3S_64Michael Ellerman
CONFIG_PPC_STD_MMU_64 indicates support for the "standard" powerpc MMU on 64-bit CPUs. The "standard" MMU refers to the hash page table MMU found in "server" processors, from IBM mainly. Currently CONFIG_PPC_STD_MMU_64 is == CONFIG_PPC_BOOK3S_64. While it's annoying to have two symbols that always have the same value, it's not quite annoying enough to bother removing one. However with the arrival of Power9, we now have the situation where CONFIG_PPC_STD_MMU_64 is enabled, but the kernel is running using the Radix MMU - *not* the "standard" MMU. So it is now actively confusing to use it, because it implies that code is disabled or inactive when the Radix MMU is in use, however that is not necessarily true. So s/CONFIG_PPC_STD_MMU_64/CONFIG_PPC_BOOK3S_64/, and do some minor formatting updates of some of the affected lines. This will be a pain for backports, but c'est la vie. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/64: Free up CPU_FTR_ICSWXMichael Ellerman
The last user of CPU_FTR_ICSWX was removed in commit 6ff4d3e96652 ("powerpc: Remove old unused icswx based coprocessor support"), so free the bit up for future use. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/mm/hash: Add pr_fmt() to hash_utils64.cAneesh Kumar K.V
Make the printks look a bit nicer by adding a prefix. Radix config now do radix-mmu: Page sizes from device-tree: radix-mmu: Page size shift = 12 AP=0x0 radix-mmu: Page size shift = 16 AP=0x5 radix-mmu: Page size shift = 21 AP=0x1 radix-mmu: Page size shift = 30 AP=0x2 This patch update hash config to do similar dmesg output. With the patch we have hash-mmu: Page sizes from device-tree: hash-mmu: base_shift=12: shift=12, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=0 hash-mmu: base_shift=12: shift=16, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=7 hash-mmu: base_shift=12: shift=24, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=56 hash-mmu: base_shift=16: shift=16, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=1 hash-mmu: base_shift=16: shift=24, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=8 hash-mmu: base_shift=20: shift=20, sllp=0x0111, avpnm=0x00000000, tlbiel=0, penc=2 hash-mmu: base_shift=24: shift=24, sllp=0x0100, avpnm=0x00000001, tlbiel=0, penc=0 hash-mmu: base_shift=34: shift=34, sllp=0x0120, avpnm=0x000007ff, tlbiel=0, penc=3 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/ipic: Fix status get and status clearChristophe Leroy
IPIC Status is provided by register IPIC_SERSR and not by IPIC_SERMR which is the mask register. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/powernv: Reserve a hole which appears after enabling IOVAlexey Kardashevskiy
In order to make generic IOV code work, the physical function IOV BAR should start from offset of the first VF. Since M64 segments share PE number space across PHB, and some PEs may be in use at the time when IOV is enabled, the existing code shifts the IOV BAR to the index of the first PE/VF. This creates a hole in IOMEM space which can be potentially taken by some other device. This reserves a temporary hole on a parent and releases it when IOV is disabled; the temporary resources are stored in pci_dn to avoid kmalloc/free. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/pseries/vio: Dispose of virq mapping on vdevice unregisterTyrel Datwyler
When a vdevice is DLPAR removed from the system the vio subsystem doesn't bother unmapping the virq from the irq_domain. As a result we have a virq mapped to a hardware irq that is no longer valid for the irq_domain. A side effect is that we are left with /proc/irq/<irq#> affinity entries, and attempts to modify the smp_affinity of the irq will fail. In the following observed example the kernel log is spammed by ics_rtas_set_affinity errors after the removal of a VSCSI adapter. This is a result of irqbalance trying to adjust the affinity every 10 seconds. rpadlpar_io: slot U8408.E8E.10A7ACV-V5-C25 removed ics_rtas_set_affinity: ibm,set-xive irq=655385 returns -3 ics_rtas_set_affinity: ibm,set-xive irq=655385 returns -3 This patch fixes the issue by calling irq_dispose_mapping() on the virq of the viodev on unregister. Fixes: f2ab6219969f ("powerpc/pseries: Add PFO support to the VIO bus") Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/64s/radix: Fix process table entry cache invalidationNicholas Piggin
According to the architecture, the process table entry cache must be flushed with tlbie RIC=2. Currently the process table entry is set to invalid right before the PID is returned to the allocator, with no invalidation. This works on existing implementations that are known to not cache the process table entry for any except the current PIDR. It is architecturally correct and cleaner to invalidate with RIC=2 after clearing the process table entry and before the PID is returned to the allocator. This can be done in arch_exit_mmap that runs before the final flush, and to ensure the final flush (fullmm) is always a RIC=2 variant. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/64s/radix: Improve preempt handling in TLB codeNicholas Piggin
Preempt should be consistently disabled for mm_is_thread_local tests, so bring the rest of these under preempt_disable(). Preempt does not need to be disabled for the mm->context.id tests, which allows simplification and removal of gotos. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/powernv: Use FIXUP_ENDIAN_HV in OPAL returnNicholas Piggin
Close the recoverability gap for OPAL calls by using FIXUP_ENDIAN_HV in the return path. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/book3s: Add an HV variant of FIXUP_ENDIAN that is recoverableNicholas Piggin
Add an HV variant of FIXUP_ENDIAN which uses HSRR[01] and does not clear MSR[RI], which improves recoverability. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/book3s: Use label for FIXUP_ENDIAN macro branchNicholas Piggin
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/64: Fix latency tracing for lazy irq replayNicholas Piggin
When returning from an exception to a soft-enabled context, pending IRQs are replayed but IRQ tracing is not reset, so a number of them can get chained together into the same IRQ-disabled trace. Fix this by having __check_irq_replay re-set IRQ trace. This is conceptually where we respond to the next interrupt, so it fits the semantics of the IRQ tracer. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06KVM: PPC: Book3S HV: Handle host system reset in guest modeNicholas Piggin
If the host takes a system reset interrupt while a guest is running, the CPU must exit the guest before processing the host exception handler. After this patch, taking a sysrq+x with a CPU running in a guest gives a trace like this: cpu 0x27: Vector: 100 (System Reset) at [c000000fdf5776f0] pc: c008000010158b80: kvmppc_run_core+0x16b8/0x1ad0 [kvm_hv] lr: c008000010158b80: kvmppc_run_core+0x16b8/0x1ad0 [kvm_hv] sp: c000000fdf577850 msr: 9000000002803033 current = 0xc000000fdf4b1e00 paca = 0xc00000000fd4d680 softe: 3 irq_happened: 0x01 pid = 6608, comm = qemu-system-ppc Linux version 4.14.0-rc7-01489-g47e1893a404a-dirty #26 SMP [c000000fdf577a00] c008000010159dd4 kvmppc_vcpu_run_hv+0x3dc/0x12d0 [kvm_hv] [c000000fdf577b30] c0080000100a537c kvmppc_vcpu_run+0x44/0x60 [kvm] [c000000fdf577b60] c0080000100a1ae0 kvm_arch_vcpu_ioctl_run+0x118/0x310 [kvm] [c000000fdf577c00] c008000010093e98 kvm_vcpu_ioctl+0x530/0x7c0 [kvm] [c000000fdf577d50] c000000000357bf8 do_vfs_ioctl+0xd8/0x8c0 [c000000fdf577df0] c000000000358448 SyS_ioctl+0x68/0x100 [c000000fdf577e30] c00000000000b220 system_call+0x58/0x6c --- Exception: c01 (System Call) at 00007fff76868df0 SP (7fff7069baf0) is in userspace Fixes: e36d0a2ed5 ("powerpc/powernv: Implement NMI IPI with OPAL_SIGNAL_SYSTEM_RESET") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06Merge branch 'x86/fpu' into x86/asm, to pick up fixIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-05f2fs: avoid race in between GC and block exchangeChao Yu
During block exchange in {insert,collapse,move}_range, page-block mapping is unstable due to mapping moving or recovery, so there should be no concurrent cache read operation rely on such mapping, nor cache write operation to mess up block exchange. So this patch let background GC be aware of that. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: save a multiplication for last_nid calculationFan Li
Use a slightly easier way to calculate last_nid. Signed-off-by: Fan li <fanofcode.li@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: fix summary info corruptionChao Yu
Sometimes, after running generic/270 of fstest, fsck reports summary info and actual position of block address in direct node becoming inconsistent. The root cause is race in between __f2fs_replace_block and change_curseg as below: Thread A Thread B - __clone_blkaddrs - f2fs_replace_block - __f2fs_replace_block - segnoA = GET_SEGNO(sbi, blkaddrA); - type = se->type:=CURSEG_HOT_DATA - if (!IS_CURSEG(sbi, segnoA)) type = CURSEG_WARM_DATA - allocate_data_block - allocate_segment - get_ssr_segment - change_curseg(segnoA, CURSEG_HOT_DATA) - change_curseg(segnoA, CURSEG_WARM_DATA) - reset_curseg - __set_sit_entry_type - change se->type from CURSEG_HOT_DATA to CURSEG_WARM_DATA So finally, hot curseg locates in segnoA, but type of segnoA becomes CURSEG_WARM_DATA. Then if we invoke __f2fs_replace_block(blkaddrB, blkaddrA, true, false), as blkaddrA locates in segnoA, so we will move warm type curseg to segnoA, then change its summary cache and writeback it to summary block. But segnoA is used by hot type curseg too, once it moves or persist, it will cover summary block content with inner old summary cache, result in inconsistent status. This patch tries to fix this issue by introduce global curseg lock to avoid race in between __f2fs_replace_block and change_curseg. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: remove dead code in update_meta_pageChao Yu
After commit a468f0ef516f ("f2fs: use crc and cp version to determine roll-forward recovery"), last caller of update_meta_page passing @src with NULL is gone, so remove related dead code there. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: remove unneeded semicolonChao Yu
Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: don't bother with inode->i_versionJeff Layton
f2fs does not set the SB_I_VERSION flag, so the i_version will never be incremented on write. It was recently changed to increment the i_version on a quota write, which isn't necessary here. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: check curseg space before foreground GCChao Yu
When we are closing to trigger foreground GC, if there are only a few of dirty metas, we can log these dirty metas in left space of opened segments instead of triggering foreground GC. With this patch, total count of foreground GC triggered by test/generic/* of fstest suit reduce from 254 to 184. So let's do the check before foreground GC anyway. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: use rw_semaphore to protect SIT cacheChao Yu
There are some cases user didn't update SIT cache under this lock, so let's use rw_semaphore instead of mutex to enhance concurrently accessing. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: support quota sys filesJaegeuk Kim
This patch supports hidden quota files in the system, which will be used for Android. It requires up-to-date f2fs-tools later than v1.9.0. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: add quota_ino feature infraJaegeuk Kim
This patch adds quota_ino feature infra to be used for quota files. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: optimize __update_nat_bitsFan Li
Make three modification for __update_nat_bits: 1. Take the codes of dealing the nat with nid 0 out of the loop Such nat only needs to be dealt with once at beginning. 2. Use " nat_index == 0" instead of " start_nid == 0" to decide if it's the first nat block It's better that we don't assume @start_nid is the first nid of the nat block it's in. 3. Use " if (nat_blk->entries[i].block_addr != NULL_ADDR)" to explicitly comfirm the value of block_addr use constant to make sure the codes is right, even if the value of NULL_ADDR changes. Signed-off-by: Fan li <fanofcode.li@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: modify for accurate fggc node io statYunlei He
modify for accurate fggc node io stat Signed-off-by: Yunlei He <heyunlei@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05Revert "f2fs: handle dirty segments inside refresh_sit_entry"Yunlong Song
This reverts commit 5e443818fa0b2a2845561ee25bec181424fb2889 The commit should be reverted because call sequence of below two parts of code must be kept: a. update sit information, it needs to be updated before segment allocation since latter allocation may trigger SSR, and SSR allocation needs latest valid block information of all segments. b. update segment status, it needs to be updated after segment allocation since we can skip updating current opened segment status. Fixes: 5e443818fa0b ("f2fs: handle dirty segments inside refresh_sit_entry") Suggested-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: remove refresh_sit_entry function] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: add a function to move nidFan Li
This patch add a new function to move nid from one state to another. Move operation is heavily used, by adding a new function for it we can cut down some branches from several flow. Signed-off-by: Fan li <fanofcode.li@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: export SSR allocation thresholdChao Yu
This patch exports min_ssr_segments threshold in sysfs to let user control triggering SSR allocation flexibly. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: give correct trimmed blocks in fstrimChao Yu
We have supported to issue discard in specified range during fstrim, it needs to return caller with successfully trimmed bytes in that range instead of bytes of invalid blocks which are scanned in checkpoint. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: support bio allocation error injectionChao Yu
This patch adds to support bio allocation error injection to simulate out-of-memory test scenario. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: support get_page error injectionChao Yu
This patch adds to support get_page error injection to simulate out-of-memory test scenario. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: add missing sysfs descriptionChao Yu
There are some missing sysfs entries' description in document, add them. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: support soft block reservationYunlong Song
It supports to extend reserved_blocks sysfs interface to be soft threshold, which allows user configure it exceeding current available user space. This patch also introduces a new sysfs interface called current_reserved_blocks, which shows the current blocks that have already been reserved. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: handle error case when adding xattr entryJaegeuk Kim
This patch fixes recovering incomplete xattr entries remaining in inline xattr and xattr block, caused by any kind of errors. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: support flexible inline xattr sizeChao Yu
Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: show current cp stateJaegeuk Kim
This patch shows whether checkpoint met any error case. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: add missing quota_initializeJaegeuk Kim
This patch adds to call quota_intialize in f2fs_set_acl, f2fs_unlink, and f2fs_rename. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: show # of dirty segments via sysfsJaegeuk Kim
This patch adds one sysfs entry to show # of dirty segments which can be used for gc timing by user. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-05f2fs: stop all the operations by cp_error flagJaegeuk Kim
This patch replaces to use cp_error flag instead of RDONLY for quota off. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-11-06NFC: Convert timers to use timer_setup()Allen Pais
Switch to using the new timer_setup() and from_timer() for net/nfc/* Signed-off-by: Allen Pais <allen.pais@oracle.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-11-06NFC: fdp: make struct nci_ops staticColin Ian King
The structure nci_ops is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'nci_ops' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-11-06nfc: s3fwrn5: make array match static constColin Ian King
Don't populate the read-only array match on the stack, instead make it static const. Makes the object code smaller by over 310 bytes: Before: text data bss dec hex filename 8304 1084 128 9516 252c drivers/nfc/s3fwrn5/firmware.o After: text data bss dec hex filename 7894 1180 128 9202 23f2 drivers/nfc/s3fwrn5/firmware.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-11-05vfs: grab the lock instead of blocking in __fd_install during resizingMateusz Guzik
Explicit locking in the fallback case provides a safe state of the table. Getting rid of blocking semantics makes __fd_install usable again in non-sleepable contexts, which easies backporting efforts. There is a side effect of slightly nicer assembly for the common case as might_sleep can now be removed. Signed-off-by: Mateusz Guzik <mguzik@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-05vfs: stop clearing close on exec when closing a fdMateusz Guzik
Codepaths allocating a fd always make sure the bit is set/unset depending on flags, thus clearing on close is redundant. Signed-off-by: Mateusz Guzik <mguzik@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-06nfc: st21nfca: constify i2c_device_idArvind Yadav
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-11-06nfc: st-nci: constify i2c_device_idArvind Yadav
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-11-06nfc: s3fwrn5: constify i2c_device_idArvind Yadav
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-11-06nfc: pn544: constify i2c_device_idArvind Yadav
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-28 23:43:24 +0000