| Age | Commit message (Collapse) | Author |
|---|
|
gc_gen was a temporary used to recalculate last_gc, but since we only need
bucket->last_gc when gc isn't running (gc_mark_valid = 1), we can just update
last_gc directly.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
This was originally added as at optimization that for various reasons isn't
needed anymore, but it does add a lot of nasty corner cases (and it was
responsible for some recently fixed bugs). Just get rid of it now.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
This changes the bucket allocation reserves to use _real_ reserves - separate
freelists - instead of watermarks, which if nothing else makes the current code
saner to reason about and is going to be important in the future when we add
support for multiple btrees.
It also adds btree_check_reserve(), which checks (and locks) the reserves for
both bucket allocation and memory allocation for btree nodes; the old code just
kinda sorta assumed that since (e.g. for btree node splits) it had the root
locked and that meant no other threads could try to make use of the same
reserve; this technically should have been ok for memory allocation (we should
always have a reserve for memory allocation (the btree node cache is used as a
reserve and we preallocate it)), but multiple btrees will mean that locking the
root won't be sufficient anymore, and for the bucket allocation reserve it was
technically possible for the old code to deadlock.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
With the locking rework in the last patch, this shouldn't be needed anymore -
btree_node_write_work() only takes b->write_lock which is never held for very
long.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
Add a new lock, b->write_lock, which is required to actually modify - or write -
a btree node; this lock is only held for short durations.
This means we can write out a btree node without taking b->lock, which _is_ held
for long durations - solving a deadlock when btree_flush_write() (from the
journalling code) is called with a btree node locked.
Right now just occurs in bch_btree_set_root(), but with an upcoming journalling
rework is going to happen a lot more.
This also turns b->lock is now more of a read/intent lock instead of a
read/write lock - but not completely, since it still blocks readers. May turn it
into a real intent lock at some point in the future.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
This isn't a bulletproof fix; btree_node_free() -> bch_bucket_free() puts the
bucket on the unused freelist, where it can be reused right away without any
ordering requirements. It would be better to wait on at least a journal write to
go down before reusing the bucket. bch_btree_set_root() does this, and inserting
into non leaf nodes is completely synchronous so we should be ok, but future
patches are just going to get rid of the unused freelist - it was needed in the
past for various reasons but shouldn't be anymore.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
This patch fixes the warning of "printk() should include KERN_ facility
level" in file rtw_debug.c.
Signed-off-by: Elena Oat <oat.elena@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This means the garbage collection code can better check for data and metadata
pointers to the same buckets.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
This will potentially save us an allocation when we've got inode/dirent bkeys
that don't fit in the keylist's inline keys.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
Break down data into clean data/dirty data/metadata.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
Change the invalidate tracepoint to indicate how much data we're invalidating,
and change the alloc tracepoints to indicate what offset they're for.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
This hasn't been used or even enabled in ages.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
Signed-off-by: Nicholas Swenson <nks@daterainc.com>
|
|
Avoid a potential null pointer deref (e.g. from check keys for cache misses)
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
Deadlock happened because a foreground write slept, waiting for a bucket
to be allocated. Normally the gc would mark buckets available for invalidation.
But the moving_gc was stuck waiting for outstanding writes to complete.
These writes used the bcache_wq, the same queue foreground writes used.
This fix gives moving_gc its own work queue, so it was still finish moving
even if foreground writes are stuck waiting for allocation. It also makes
work queue a parameter to the data_insert path, so moving_gc can use its
workqueue for writes.
Signed-off-by: Nicholas Swenson <nks@daterainc.com>
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
blk_stack_limits() doesn't like a discard granularity of 0.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
The on disk bucket gens are allowed to be out of date, when we reuse buckets
that didn't have any live data in them. To deal with this, the initial gc has to
update the bucket gen when we find a pointer gen newer than the bucket's gen.
Unfortunately we weren't doing this for pointers in the journal that we're about
to replay.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
The code to fixup incorrect bucket prios incorrectly did not skip btree node
freeing keys
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
This patch fixes the warning "unchecked sscanf return value" in file
rtw_mp.c. Zero is returned in case sscanf fails or if less than expected
items are read and assigned successfully. I have decided to return zero,
because in previous conditional statements zero was returned in case of
failure.
While at it, I have also fixed the warning of line over 80
characters.
Signed-off-by: Elena Oat <oat.elena@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
checkpatch.pl issues with line over
80 characters in speakup_dectlk.c
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On recovery we weren't correctly keeping track of what journal buckets had open
journal entries, thus it was possible for them to be overwritten until we'd
written all new journal entries.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
|
|
There is no point in combining a variable
that is 0 with other things with |
The semantic patch used:
@@
expression x,e,e1;
statement S;
@@
if (x == 0) {
<... when != x = e1
when != while(...) S
when != for(...;...;...) S
- x |= e
+ x = e
...>
}
Signed-off-by: Georgiana Rodica Chelu <georgiana.chelu93@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix checkpatch.pl issues with line over 80 characters in adt7316.c
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix checkpatch.pl issues with quoted string split across lines in
dot11d.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch solves the warning "Assignment of bool to 0/1"
Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In ip6_append_data_mtu(), when the xfrm mode is not tunnel(such as
transport),the ipsec header need to be added in the first fragment, so the mtu
will decrease to reserve space for it, then the second fragment come, the mtu
should be turn back, as the commit 0c1833797a5a6ec23ea9261d979aa18078720b74
said. however, in the commit a493e60ac4bbe2e977e7129d6d8cbb0dd236be, it use
*mtu = min(*mtu, ...) to change the mtu, which lead to the new mtu is alway
equal with the first fragment's. and cannot turn back.
when I test through ping6 -c1 -s5000 $ip (mtu=1280):
...frag (0|1232) ESP(spi=0x00002000,seq=0xb), length 1232
...frag (1232|1216)
...frag (2448|1216)
...frag (3664|1216)
...frag (4880|164)
which should be:
...frag (0|1232) ESP(spi=0x00001000,seq=0x1), length 1232
...frag (1232|1232)
...frag (2464|1232)
...frag (3696|1232)
...frag (4928|116)
so delete the min() when change back the mtu.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Fixes: 75a493e60ac4bb ("ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size")
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make sure iounmap is always called after ioremap when module loading
fails. Also remove a call to release_mem_region because that region is
never reserved in the first place.
Fixes the following issue reported by Coccinelle:
drivers/staging/slicoss/slicoss.c:3727:1-7: ERROR: missing iounmap; ioremap on line 3661 and execution via conditional on line 3677
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix checkpatch.pl issues with multiple spaces after return type in
drv_types.h
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix checkpatch.pl issues with
line over 80 characters in osdep_service.h
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Kconfig symbol ISDN_CAPI_MIDDLEWARE is only used in capi.c. Setting
it without setting ISDN_CAPI_CAPI20 is therefor useless. Make it depend
on ISDN_CAPI_CAPI20 and put its entry after ISDN_CAPI_CAPI20's entry.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes the following sparse warnings:
drivers/staging/ozwpan/ozusbsvc1.c:391:36: warning: cast to restricted __le16
drivers/staging/ozwpan/ozusbsvc1.c:393:33: warning: cast to restricted __le16
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes the following sparse warning:
drivers/staging/ozwpan/ozusbsvc1.c:208:50: warning: incorrect type in argument 6 (different base types)
drivers/staging/ozwpan/ozusbsvc1.c:208:50: expected unsigned short [unsigned] [usertype] windex
drivers/staging/ozwpan/ozusbsvc1.c:208:50: got restricted __le16 [usertype] wIndex
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix checkpatch.pl issues with line over 80 characters in rtsx_card.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix checkpatch.pl issues with do not add
new typedefs in bp_ioctl.h
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removes needless boolean TRUE and false comparisons and reflows some lines to
eliminate over 80 character if statments.
Signed-off-by: Jade Bilkey <herself@thefumon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes several checkpatch
WARNING: space prohibited before semicolon
Signed-off-by: Jade Bilkey <herself@thefumon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Jade Bilkey <herself@thefumon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cleans up a few needless comparisons with booleans and cleans up an
interupt handler to take advantage of earlier bailout shortcircuit.
Signed-off-by: Jade Bilkey <herself@thefumon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes checkpatch.pl warnings and errors:
ERROR: that open brace { should be on the previous line
+ if (!psIntfAdapter->psInterruptUrb)
+ {
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Cannot allocate interrupt urb");
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Cannot allocate interrupt urb");
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Cannot allocate interrupt urb");
^
WARNING: line over 80 characters
+ psIntfAdapter->ulInterruptData;
WARNING: line over 80 characters
+ sizeof(psIntfAdapter->ulInterruptData);
WARNING: line over 80 characters
+ psIntfAdapter->sIntrIn.int_in_endpointAddr);
WARNING: line over 80 characters
+ psIntfAdapter->psInterruptUrb->transfer_buffer,
WARNING: line over 80 characters
+ psIntfAdapter->psInterruptUrb->transfer_buffer_length,
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Interrupt Interval: %d\n",
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Interrupt Interval: %d\n",
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Interrupt Interval: %d\n",
^
ERROR: that open brace { should be on the previous line
+ if( false == psIntfAdapter->psAdapter->device_removed &&
+ false == psIntfAdapter->psAdapter->bEndPointHalted &&
+ false == psIntfAdapter->bSuspended &&
+ false == psIntfAdapter->bPreparingForBusSuspend &&
+ false == psIntfAdapter->psAdapter->StopAllXaction)
+ {
ERROR: space prohibited after that open parenthesis '('
+ if( false == psIntfAdapter->psAdapter->device_removed &&
ERROR: space required before the open parenthesis '('
+ if( false == psIntfAdapter->psAdapter->device_removed &&
WARNING: line over 80 characters
+ status = usb_submit_urb(psIntfAdapter->psInterruptUrb, GFP_ATOMIC);
ERROR: that open brace { should be on the previous line
+ if (status)
+ {
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Cannot send int urb %d\n", status);
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Cannot send int urb %d\n", status);
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Cannot send int urb %d\n", status);
^
ERROR: that open brace { should be on the previous line
+ if(status == -EPIPE)
+ {
ERROR: space required before the open parenthesis '('
+ if(status == -EPIPE)
WARNING: line over 80 characters
+ psIntfAdapter->psAdapter->bEndPointHalted = TRUE ;
WARNING: space prohibited before semicolon
+ psIntfAdapter->psAdapter->bEndPointHalted = TRUE ;
WARNING: line over 80 characters
+ wake_up(&psIntfAdapter->psAdapter->tx_packet_wait_queue);
Signed-off-by: Jade Bilkey <herself@thefumon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes checkpatch.pl warnings and errors:
ERROR: switch and case should be at the same indent
+ switch (status) {
[...]
+ case STATUS_SUCCESS:
[...]
+ case -ENOENT :
[...]
+ case -EINPROGRESS:
[...]
+ case -EPIPE:
[...]
+ case -ECONNRESET: //URB got unlinked.
+ case -ESHUTDOWN: // hardware gone. this is the serious problem.
[...]
+ case -ENODEV : //Device got removed
+ case -EINVAL : //Some thing very bad happened with the URB. No description is available.
[...]
+ default:
ERROR: that open brace { should be on the previous line
+ if ( urb->actual_length )
+ {
ERROR: space prohibited after that open parenthesis '('
+ if ( urb->actual_length )
ERROR: space prohibited before that close parenthesis ')'
+ if ( urb->actual_length )
ERROR: that open brace { should be on the previous line
+ if(psIntfAdapter->ulInterruptData[1] & 0xFF)
+ {
ERROR: space required before the open parenthesis '('
+ if(psIntfAdapter->ulInterruptData[1] & 0xFF)
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL, "Got USIM interrupt");
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL, "Got USIM interrupt");
^
ERROR: that open brace { should be on the previous line
+ if(psIntfAdapter->ulInterruptData[1] & 0xFF00)
+ {
ERROR: space required before the open parenthesis '('
+ if(psIntfAdapter->ulInterruptData[1] & 0xFF00)
WARNING: line over 80 characters
+ (psIntfAdapter->ulInterruptData[1] & 0xFF00) >> 8);
WARNING: space prohibited between function name and open parenthesis '('
+ atomic_set (&Adapter->uiMBupdate, TRUE);
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL, "TX mailbox contains %d",
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL, "TX mailbox contains %d",
^
+ atomic_read(&Adapter->CurrNumFreeTxDesc));
ERROR: that open brace { should be on the previous line
+ if(psIntfAdapter->ulInterruptData[1] >> 16)
+ {
ERROR: space required before the open parenthesis '('
+ if(psIntfAdapter->ulInterruptData[1] >> 16)
ERROR: spaces required around that '=' (ctx:VxE)
+ Adapter->CurrNumRecvDescs=
^
WARNING: line over 80 characters
+ (psIntfAdapter->ulInterruptData[1] >> 16);
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"RX mailbox contains %d",
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"RX mailbox contains %d",
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"RX mailbox contains %d",
^
ERROR: that open brace { should be on the previous line
+ if(Adapter->fw_download_done &&
+ !Adapter->downloadDDR &&
+ atomic_read(&Adapter->CurrNumFreeTxDesc))
+ {
ERROR: space required before the open parenthesis '('
+ if(Adapter->fw_download_done &&
ERROR: spaces required around that '+=' (ctx:WxV)
+ psIntfAdapter->psAdapter->downloadDDR +=1;
^
ERROR: that open brace { should be on the previous line
+ if(false == Adapter->waiting_to_fw_download_done)
+ {
ERROR: space required before the open parenthesis '('
+ if(false == Adapter->waiting_to_fw_download_done)
ERROR: that open brace { should be on the previous line
+ if(!atomic_read(&Adapter->TxPktAvail))
+ {
ERROR: space required before the open parenthesis '('
+ if(!atomic_read(&Adapter->TxPktAvail))
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Firing interrupt in URB");
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Firing interrupt in URB");
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Firing interrupt in URB");
^
ERROR: space prohibited before that ':' (ctx:WxE)
+ case -ENOENT :
^
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"URB has got disconnected ....");
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"URB has got disconnected ....");
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"URB has got disconnected ....");
^
WARNING: space prohibited before semicolon
+ return ;
WARNING: line over 80 characters
+ //This situation may happened when URBunlink is used. for detail check usb_unlink_urb documentation.
ERROR: do not use C99 // comments
+ //This situation may happened when URBunlink is used. for detail check usb_unlink_urb documentation.
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occurred... something very bad is going on");
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occurred... something very bad is going on");
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occurred... something very bad is going on");
^
WARNING: space prohibited before semicolon
+ break ;
ERROR: do not use C99 // comments
+ //return;
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Interrupt IN endPoint has got halted/stalled...need to clear this");
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Interrupt IN endPoint has got halted/stalled...need to clear this");
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Interrupt IN endPoint has got halted/stalled...need to clear this");
^
WARNING: space prohibited before semicolon
+ Adapter->bEndPointHalted = TRUE ;
WARNING: space prohibited before semicolon
+ urb->status = STATUS_SUCCESS ;
ERROR: do not use C99 // comments
+ case -ECONNRESET: //URB got unlinked.
WARNING: line over 80 characters
+ case -ESHUTDOWN: // hardware gone. this is the serious problem.
ERROR: do not use C99 // comments
+ case -ESHUTDOWN: // hardware gone. this is the serious problem.
WARNING: line over 80 characters
+ //Occurs only when something happens with the host controller device
ERROR: code indent should use tabs where possible
+^I ^I^I^I^I^I^I//Occurs only when something happens with the host controller device$
WARNING: please, no space before tabs
+^I ^I^I^I^I^I^I//Occurs only when something happens with the host controller device$
ERROR: do not use C99 // comments
+ //Occurs only when something happens with the host controller device
ERROR: do not use C99 // comments
+ case -ENODEV : //Device got removed
ERROR: space prohibited before that ':' (ctx:WxW)
+ case -ENODEV : //Device got removed
^
WARNING: line over 80 characters
+ case -EINVAL : //Some thing very bad happened with the URB. No description is available.
ERROR: do not use C99 // comments
+ case -EINVAL : //Some thing very bad happened with the URB. No description is available.
ERROR: space prohibited before that ':' (ctx:WxW)
+ case -EINVAL : //Some thing very bad happened with the URB. No description is available.
^
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"interrupt urb error %d", status);
ERROR: code indent should use tabs where possible
+^I ^IBCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"interrupt urb error %d", status);$
WARNING: please, no space before tabs
+^I ^IBCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"interrupt urb error %d", status);$
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"interrupt urb error %d", status);
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"interrupt urb error %d", status);
^
WARNING: space prohibited before semicolon
+ urb->status = STATUS_SUCCESS ;
WARNING: space prohibited before semicolon
+ break ;
ERROR: do not use C99 // comments
+ //return;
ERROR: spaces required around that ':' (ctx:VxE)
+ default:
^
WARNING: line over 80 characters
+ //This is required to check what is the defaults conditions when it occurs..
ERROR: do not use C99 // comments
+ //This is required to check what is the defaults conditions when it occurs..
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL,"GOT DEFAULT INTERRUPT URB STATUS :%d..Please Analyze it...", status);
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL,"GOT DEFAULT INTERRUPT URB STATUS :%d..Please Analyze it...", status);
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL,"GOT DEFAULT INTERRUPT URB STATUS :%d..Please Analyze it...", status);
^
Signed-off-by: Jade Bilkey <herself@thefumon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes checkpatch.pl warnings and errors and removes some dead code.
Checkpath warnings and errors fixed:
WARNING: line over 80 characters
WARNING: space prohibited before semicolon
ERROR: that open brace { should be on the previous line
ERROR: space required before the open parenthesis '('
ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: Jade Bilkey <herself@thefumon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes the following checkpatch errors:
ERROR: space prohibited after that '&' (ctx:WxW)
+ memcpy((PVOID) & pstHostMibs->
^
ERROR: space prohibited after that '&' (ctx:WxW)
+ (PVOID) & Adapter->
^
ERROR: space prohibited after that '&' (ctx:WxW)
+ memcpy((PVOID) & pstHostMibs->astSFtable[nSfIndex],
^
ERROR: space prohibited after that '&' (ctx:WxW)
+ (PVOID) & Adapter->PackInfo[nSfIndex],
^
Signed-off-by: Jade Bilkey <herself@thefumon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes checkpatch.pl warning quoted string split across lines
in wlan-ng driver.
Signed-off-by: Tugce Sirin <ztugcesirin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes checkpatch.pl error prefer netdev_info to printk in
wlan-ng driver.
Signed-off-by: Tugce Sirin <ztugcesirin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes checkpatch.pl error prefer netdev_error to printk in
wlan-ng driver.
Signed-off-by: Tugce Sirin <ztugcesirin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Armada 370 DB board not only has analog audio input/output, but
also S/PDIF input/output. This commit adds support for S/PDIF in the
ASoC machine driver of the Armada 370 DB platform, and adjusts the
Device Tree bindings documentation accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
Fix checkpatch.pl issues with printk() should include
KERN_ facility level in wb35rx.c
Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix checkpatch.pl issues with line over 80 characters in imx-hdmi.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix checkpatch.pl issues with line over 80 characters in imx-ldb.c
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove checking control_reg in [set|get]_voltage_sel and then convert to use
regulator_[set|get]_voltage_sel_regmap for [set|get]_voltage_sel callbacks.
The anatop-reg-offset property is a required property rather than optional
property. So the question is what is the meaning of setting anatop-reg-offset
to 0? If 0 is a valid setting for anatop-reg-offset and it has special meaning,
we had better document it in the binding document. Otherwise, remove the testing
for control_reg in the driver.
No anatop voltage regulator node in the dts files set anatop-reg-offset to 0.
So I think it's safe to remove testing if control_reg is 0.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
