| Age | Commit message (Collapse) | Author |
|---|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These two patches add an ACPI HID and update the way the platform-
specific firmware identifier is extracted from the ACPI.
|
|
Mike and others noticed that EEVDF does like to over-schedule quite a
bit -- which does hurt performance of a number of benchmarks /
workloads.
In particular, what seems to cause over-scheduling is that when lag is
of the same order (or larger) than the request / slice then placement
will not only cause the task to be placed left of current, but also
with a smaller deadline than current, which causes immediate
preemption.
[ notably, lag bounds are relative to HZ ]
Mike suggested we stick to picking 'current' for as long as it's
eligible to run, giving it uninterrupted runtime until it reaches
parity with the pack.
Augment Mike's suggestion by only allowing it to exhaust it's initial
request.
One random data point:
echo NO_RUN_TO_PARITY > /debug/sched/features
perf stat -a -e context-switches --repeat 10 -- perf bench sched messaging -g 20 -t -l 5000
3,723,554 context-switches ( +- 0.56% )
9.5136 +- 0.0394 seconds time elapsed ( +- 0.41% )
echo RUN_TO_PARITY > /debug/sched/features
perf stat -a -e context-switches --repeat 10 -- perf bench sched messaging -g 20 -t -l 5000
2,556,535 context-switches ( +- 0.51% )
9.2427 +- 0.0302 seconds time elapsed ( +- 0.33% )
Suggested-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230816134059.GC982867@hirez.programming.kicks-ass.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix new MSG_SPLICE_PAGES support in server's TCP sendmsg helper
* tag 'nfsd-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
sunrpc: set the bv_offset of first bvec in svc_tcp_sendmsg
|
|
Be more careful when tearing down the subrequests of an O_DIRECT write
as part of a retransmission.
Reported-by: Chris Mason <clm@fb.com>
Fixes: ed5d588fe47f ("NFS: Try to join page groups before an O_DIRECT retransmission")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pausing and canceling balance can race to interrupt balance lead to BUG_ON
panic in btrfs_cancel_balance. The BUG_ON condition in btrfs_cancel_balance
does not take this race scenario into account.
However, the race condition has no other side effects. We can fix that.
Reproducing it with panic trace like this:
kernel BUG at fs/btrfs/volumes.c:4618!
RIP: 0010:btrfs_cancel_balance+0x5cf/0x6a0
Call Trace:
<TASK>
? do_nanosleep+0x60/0x120
? hrtimer_nanosleep+0xb7/0x1a0
? sched_core_clone_cookie+0x70/0x70
btrfs_ioctl_balance_ctl+0x55/0x70
btrfs_ioctl+0xa46/0xd20
__x64_sys_ioctl+0x7d/0xa0
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Race scenario as follows:
> mutex_unlock(&fs_info->balance_mutex);
> --------------------
> .......issue pause and cancel req in another thread
> --------------------
> ret = __btrfs_balance(fs_info);
>
> mutex_lock(&fs_info->balance_mutex);
> if (ret == -ECANCELED && atomic_read(&fs_info->balance_pause_req)) {
> btrfs_info(fs_info, "balance: paused");
> btrfs_exclop_balance(fs_info, BTRFS_EXCLOP_BALANCE_PAUSED);
> }
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: xiaoshoukui <xiaoshoukui@ruijie.com.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
bio_ctrl->len_to_oe_boundary is used to make sure we stay inside a zone
as we submit bios for writes. Every time we add a page to the bio, we
decrement those bytes from len_to_oe_boundary, and then we submit the
bio if we happen to hit zero.
Most of the time, len_to_oe_boundary gets set to U32_MAX.
submit_extent_page() adds pages into our bio, and the size of the bio
ends up limited by:
- Are we contiguous on disk?
- Does bio_add_page() allow us to stuff more in?
- is len_to_oe_boundary > 0?
The len_to_oe_boundary math starts with U32_MAX, which isn't page or
sector aligned, and subtracts from it until it hits zero. In the
non-zoned case, the last IO we submit before we hit zero is going to be
unaligned, triggering BUGs.
This is hard to trigger because bio_add_page() isn't going to make a bio
of U32_MAX size unless you give it a perfect set of pages and fully
contiguous extents on disk. We can hit it pretty reliably while making
large swapfiles during provisioning because the machine is freshly
booted, mostly idle, and the disk is freshly formatted. It's also
possible to trigger with reads when read_ahead_kb is set to 4GB.
The code has been clean up and shifted around a few times, but this flaw
has been lurking since the counter was added. I think the commit
24e6c8082208 ("btrfs: simplify main loop in submit_extent_page") ended
up exposing the bug.
The fix used here is to skip doing math on len_to_oe_boundary unless
we've changed it from the default U32_MAX value. bio_add_page() is the
real limit we want, and there's no reason to do extra math when block
layer is doing it for us.
Sample reproducer, note you'll need to change the path to the bdi and
device:
SUBVOL=/btrfs/swapvol
SWAPFILE=$SUBVOL/swapfile
SZMB=8192
mkfs.btrfs -f /dev/vdb
mount /dev/vdb /btrfs
btrfs subvol create $SUBVOL
chattr +C $SUBVOL
dd if=/dev/zero of=$SWAPFILE bs=1M count=$SZMB
sync
echo 4 > /proc/sys/vm/drop_caches
echo 4194304 > /sys/class/bdi/btrfs-2/read_ahead_kb
while true; do
echo 1 > /proc/sys/vm/drop_caches
echo 1 > /proc/sys/vm/drop_caches
dd of=/dev/zero if=$SWAPFILE bs=4096M count=2 iflag=fullblock
done
Fixes: 24e6c8082208 ("btrfs: simplify main loop in submit_extent_page")
CC: stable@vger.kernel.org # 6.4+
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fstests with POST_MKFS_CMD="btrfstune -m" (as in the mailing list)
reported a few of the test cases failing.
The failure scenario can be summarized and simplified as follows:
$ mkfs.btrfs -fq -draid1 -mraid1 /dev/sdb1 /dev/sdb2 :0
$ btrfstune -m /dev/sdb1 :0
$ wipefs -a /dev/sdb1 :0
$ mount -o degraded /dev/sdb2 /btrfs :0
$ btrfs replace start -B -f -r 1 /dev/sdb1 /btrfs :1
STDERR:
ERROR: ioctl(DEV_REPLACE_START) failed on "/btrfs": Input/output error
[11290.583502] BTRFS warning (device sdb2): tree block 22036480 mirror 2 has bad fsid, has 99835c32-49f0-4668-9e66-dc277a96b4a6 want da40350c-33ac-4872-92a8-4948ed8c04d0
[11290.586580] BTRFS error (device sdb2): unable to fix up (regular) error at logical 22020096 on dev /dev/sdb8 physical 1048576
As above, the replace is failing because we are verifying the header with
fs_devices::fsid instead of fs_devices::metadata_uuid, despite the
metadata_uuid actually being present.
To fix this, use fs_devices::metadata_uuid. We copy fsid into
fs_devices::metadata_uuid if there is no metadata_uuid, so its fine.
Fixes: a3ddbaebc7c9 ("btrfs: scrub: introduce a helper to verify one metadata block")
CC: stable@vger.kernel.org # 6.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
loongarch"
Unifying the asm-generic headers across 32-bit and 64-bit architectures
based on the compiler provided macros was a good idea and appears to work
with all user space, but it caused a regression when building old kernels
on systems that have the new headers installed in /usr/include, as this
combination trips an inconsistency in the kernel's own tools/include
headers that are a mix of userspace and kernel-internal headers.
This affects kernel builds on arm64, riscv64 and loongarch64 systems that
might end up using the "#define __BITS_PER_LONG 32" default from the old
tools headers. Backporting the commit into stable kernels would address
this, but it would still break building kernels without that backport,
and waste time for developers trying to understand the problem.
arm64 build machines are rather common, and on riscv64 this can also
happen in practice, but loongarch64 is probably new enough to not
be used much for building old kernels, so only revert the bits
for arm64 and riscv.
Link: https://lore.kernel.org/all/20230731160402.GB1823389@dev-arch.thelio-3990X/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 8386f58f8deda ("asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch")
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 fixes for v6.5
This corrects the invalid path specifier for L3 interconnects in the CPU
nodes of SM8150 and SM8250. It corrects the compatible of the SC8180X L3
node, to pass the binding check.
The crypto core, and its DMA controller, is disabled on SM8350 to avoid
the system from crashing at boot while the issue is diagnosed.
A thermal zone node name conflict is resolved for PM8150L, on the RB5
board.
The UFS vccq voltage is corrected on the SA877P Ride platform, to
address observed stability issues.
The reg-names of the DSI phy on SC7180 are restored after an accidental
search-and-replace update.
* tag 'qcom-arm64-fixes-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names
arm64: dts: qcom: sa8775p-ride: Update L4C parameters
arm64: dts: qcom: qrb5165-rb5: fix thermal zone conflict
arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot
arm64: dts: qcom: sc8180x: Fix OSM L3 compatible
arm64: dts: qcom: sm8250: Fix EPSS L3 interconnect cells
arm64: dts: qcom: sm8150: Fix OSM L3 interconnect cells
Link: https://lore.kernel.org/r/20230815142042.2459048-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps
A fix external abort on non-linefetch for am335x that is fixed with a flush
of posted write. And two networking fixes for beaglebone mostly for revision
c3 to do phy reset with a gpio and to fix a boot time warning.
* tag 'omap-for-v6.5/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-bone-common: Add vcc-supply for on-board eeprom
ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board
bus: ti-sysc: Flush posted write on enable before reset
Link: https://lore.kernel.org/r/pull-1692158536-457318@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Correct wifi interrupt flags for some boards, fixed wifi on Rock PI4,
disabled hs400 speeds for some boards having problems with data
intergrity and some dt property/styling fixes.
* tag 'v6.5-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boards
arm64: dts: rockchip: minor whitespace cleanup around '='
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
arm64: dts: rockchip: add missing space before { on indiedroid nova
arm64: dts: rockchip: correct wifi interrupt flag in Box Demo
arm64: dts: rockchip: correct wifi interrupt flag in Rock Pi 4B
arm64: dts: rockchip: correct wifi interrupt flag in eaidk-610
arm64: dts: rockchip: Drop invalid regulator-init-microvolt property
Link: https://lore.kernel.org/r/4519945.8hzESeGDPO@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
fixed register access error when switching to other tas2781 -- refresh the page
inside regmap on the switched tas2781
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20230817093257.951-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
An ACPI ID has been allocated for CS35L56 ASoC devices so that they can
be instantiated from ACPI Device entries.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230817112712.16637-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use a device property "cirrus,firmware-uid" to get the unique firmware
identifier instead of using ACPI _SUB. There aren't any products that use
_SUB.
There will not usually be a _SUB in Soundwire nodes. The ACPI can use a
_DSD section for custom properties.
There is also a need to support instantiating this driver using software
nodes. This is for systems where the CS35L56 is a back-end device and the
ACPI refers only to the front-end audio device - there will not be any ACPI
references to CS35L56.
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230817112712.16637-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit ca62297b2085b5b3168bd891ca24862242c635a1.
Commit ca62297b2085 ("drm/edid: Fix csync detailed mode parsing") fixed
EDID detailed mode sync parsing. Unfortunately, there are quite a few
displays out there that have bogus (zero) sync field that are broken by
the change. Zero means analog composite sync, which is not right for
digital displays, and the modes get rejected. Regardless, it used to
work, and it needs to continue to work. Revert the change.
Rejecting modes with analog composite sync was the part that fixed the
gitlab issue 8146 [1]. We'll need to get back to the drawing board with
that.
[1] https://gitlab.freedesktop.org/drm/intel/-/issues/8146
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8789
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8930
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9044
Fixes: ca62297b2085 ("drm/edid: Fix csync detailed mode parsing")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.4+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230815101907.2900768-1-jani.nikula@intel.com
|
|
Christian reported spurious module load crashes after some of Song's
module memory layout patches.
Turns out that if the very last instruction on the very last page of the
module is a 'JMP __x86_return_thunk' then __static_call_fixup() will
trip a fault and die.
And while the module rework made this slightly more likely to happen,
it's always been possible.
Fixes: ee88d363d156 ("x86,static_call: Use alternative RET encoding")
Reported-by: Christian Bricart <christian@bricart.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lkml.kernel.org/r/20230816104419.GA982867@hirez.programming.kicks-ass.net
|
|
If the switch is reset during active EEPROM transactions, as in
just after an SoC reset after power up, the I2C bus transaction
may be cut short leaving the EEPROM internal I2C state machine
in the wrong state. When the switch is reset again, the bad
state machine state may result in data being read from the wrong
memory location causing the switch to enter unexpected mode
rendering it inoperational.
Fixes: a3dcb3e7e70c ("net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset")
Signed-off-by: Alfred Lee <l00g33k@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230815001323.24739-1-l00g33k@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the
/proc/powerpc/rtas/firmware_update interface to prepare a system
firmware update yields a BUG():
kernel BUG at mm/usercopy.c:102!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 0 PID: 2232 Comm: dd Not tainted 6.5.0-rc3+ #2
Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 of:IBM,FW860.50 (SV860_146) hv:phyp pSeries
NIP: c0000000005991d0 LR: c0000000005991cc CTR: 0000000000000000
REGS: c0000000148c76a0 TRAP: 0700 Not tainted (6.5.0-rc3+)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002242 XER: 0000000c
CFAR: c0000000001fbd34 IRQMASK: 0
[ ... GPRs omitted ... ]
NIP usercopy_abort+0xa0/0xb0
LR usercopy_abort+0x9c/0xb0
Call Trace:
usercopy_abort+0x9c/0xb0 (unreliable)
__check_heap_object+0x1b4/0x1d0
__check_object_size+0x2d0/0x380
rtas_flash_write+0xe4/0x250
proc_reg_write+0xfc/0x160
vfs_write+0xfc/0x4e0
ksys_write+0x90/0x160
system_call_exception+0x178/0x320
system_call_common+0x160/0x2c4
The blocks of the firmware image are copied directly from user memory
to objects allocated from flash_block_cache, so flash_block_cache must
be created using kmem_cache_create_usercopy() to mark it safe for user
access.
Fixes: 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[mpe: Trim and indent oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230810-rtas-flash-vs-hardened-usercopy-v2-1-dcf63793a938@linux.ibm.com
|
|
For stack-validation of a frame-pointer build, objtool validates that
every CALL instruction is preceded by a frame-setup. The new SRSO
return thunks violate this with their RSB stuffing trickery.
Extend the __fentry__ exception to also cover the embedded_insn case
used for this. This cures:
vmlinux.o: warning: objtool: srso_untrain_ret+0xd: call without frame pointer save/setup
Fixes: 4ae68b26c3ab ("objtool/x86: Fix SRSO mess")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20230816115921.GH980931@hirez.programming.kicks-ass.net
|
|
nouveau_connector_create
We can't simply free the connector after calling drm_connector_init on it.
We need to clean up the drm side first.
It might not fix all regressions from commit 2b5d1c29f6c4
("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts"),
but at least it fixes a memory corruption in error handling related to
that commit.
Link: https://lore.kernel.org/lkml/20230806213107.GFZNARG6moWpFuSJ9W@fat_crate.local/
Fixes: 95983aea8003 ("drm/nouveau/disp: add connector class")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814144933.3956959-1-kherbst@redhat.com
|
|
'rcu-tasks.2023.07.24a', 'rcuscale.2023.07.14b', 'refscale.2023.07.14b', 'torture.2023.08.14a' and 'torturescripts.2023.07.20a' into HEAD
doc.2023.07.14b: Documentation updates.
fixes.2023.08.16a: Miscellaneous fixes.
rcu-tasks.2023.07.24a: RCU Tasks updates.
rcuscale.2023.07.14b: RCU (updater) scalability test updates.
refscale.2023.07.14b: Reference (reader) scalability test updates.
torture.2023.08.14a: Other torture-test updates.
torturescripts.2023.07.20a: Other torture-test scripting updates.
|
|
When the objects managed by rculist_nulls are allocated with
SLAB_TYPESAFE_BY_RCU, old readers may still hold references to an object
even though it is just now being added, which means the modification of
->next is visible to readers. This patch therefore uses WRITE_ONCE()
for assignments to ->next.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
The rcu_nocb_poll kernel boot parameter is defined via early_param(),
whose parsing functions are invoked from parse_early_param() which
is in turn invoked by setup_arch(), which is very early indeed. It
is invoked so early that the console output timestamps read 0.000000,
in other words, before time begins.
This use of early_param() means that the rcu_nocb_poll kernel boot
parameter cannot usefully be embedded into the kernel image. Yes, you
can embed it, but setup_boot_config() is invoked from start_kernel()
too late for it to be parsed.
But it makes no sense to parse this parameter so early. After all,
it cannot do anything until the rcuog kthreads are created, which is
long after rcu_init() time, let alone setup_boot_config() time.
This commit therefore switches the rcu_nocb_poll kernel boot parameter
from early_param() to __setup(), which allows boot-config parsing of
this parameter, in turn allowing it to be embedded into the kernel image.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
The rcu_request_urgent_qs_task() function does a cross-CPU store
to ->rcu_urgent_qs, so this commit therefore marks the load in
__rcu_irq_enter_check_tick() with READ_ONCE().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
This commit removes two #ifdef directives from include/linux/notifier.h
by causing SRCU Tiny to provide a dummy srcu_usage structure and a dummy
__SRCU_USAGE_INIT() macro.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Sachin Sant <sachinp@linux.ibm.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Since commit 4e57a4ddf6b0 ("ARM: 9107/1: syscall: always store
thread_info->abi_syscall"), the seccomp selftests "syscall_errno"
and "syscall_faked" have been broken. Both seccomp and PTRACE depend
on using the special value of "-1" for skipping syscalls. This value
wasn't working because it was getting masked by __NR_SYSCALL_MASK in
both PTRACE_SET_SYSCALL and get_syscall_nr().
Explicitly test for -1 in PTRACE_SET_SYSCALL and get_syscall_nr(),
leaving it exposed when present, allowing tracers to skip syscalls
again.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Fixes: 4e57a4ddf6b0 ("ARM: 9107/1: syscall: always store thread_info->abi_syscall")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230810195422.2304827-2-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Since commit 4e57a4ddf6b0 ("ARM: 9107/1: syscall: always store
thread_info->abi_syscall"), the seccomp selftests "syscall_restart" has
been broken. This was caused by the restart syscall not being stored to
"abi_syscall" during restart setup before branching to the "local_restart"
label. Tracers would see the wrong syscall, and scno would get overwritten
while returning from the TIF_WORK path. Add the missing store.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Fixes: 4e57a4ddf6b0 ("ARM: 9107/1: syscall: always store thread_info->abi_syscall")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230810195422.2304827-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Use `memcpy` since `console_buf` is not expected to be NUL-terminated
and it more accurately describes what is happening with the buffers
`console_buf` and `string` as per Kees' analysis [1].
Also mark char buffer as `__nonstring` as per Kees' suggestion [2].
This change now makes it more clear what this code does and that
`console_buf` is not expected to be NUL-terminated.
Link: https://lore.kernel.org/all/202308081708.D5ADC80F@keescook/ [1]
Link: https://github.com/KSPP/linux/issues/90 [2]
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
Cc: linux-hardening@vger.kernel.org
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20230809-arch-um-v3-1-f63e1122d77e@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on its destination buffer argument which is
_not_ the case for `strncpy`!
In this case, we are able to drop the now superfluous `... - 1`
instances because `strscpy` will automatically truncate the last byte by
setting it to a NUL byte if the source size exceeds the destination size
or if the source string is not NUL-terminated.
I've also opted to remove the seemingly useless char* casts. I'm not
sure why they're present at all since (after expanding the `ifr_name`
macro) `ifr.ifr_ifrn.ifrn_name` is a char* already.
All in all, `strscpy` is a more robust and less ambiguous interface
while also letting us remove some `... -1`'s which cleans things up a
bit.
[1]: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
[2]: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20230807-arch-um-drivers-v1-1-10d602c5577a@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The cited patch change mlx5_cmd_update_root_ft() to work with multiple
peer devices. However, it didn't align the error flow as well.
Hence, Fix the error code to work with multiple peer devices.
Fixes: 222dd185833e ("{net/RDMA}/mlx5: introduce lag_for_each_peer")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Before this fix, running high rate traffic through XDP_REDIRECT
with multibuf could overrun the fifo used to release the
xdp frames after tx completion. This resulted in corrupted data
being consumed on the free side.
The culplirt was a miscalculation of the fifo size: the maximum ratio
between fifo entries / data segments was incorrect. This ratio serves to
calculate the max fifo size for a full sq where each packet uses the
worst case number of entries in the fifo.
This patch fixes the formula and names the constant. It also makes sure
that future values will use a power of 2 number of entries for the fifo
mask to work.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Fixes: 3f734b8c594b ("net/mlx5e: XDP, Use multiple single-entry objects in xdpi_fifo")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
While debugging another issue I noticed that the stack trace contains one
invalid entry at the end:
<idle>-0 [008] d..4. 26.484201: wake_lat: pid=0 delta=2629976084 000000009cc24024 stack=STACK:
=> __schedule+0xac6/0x1a98
=> schedule+0x126/0x2c0
=> schedule_timeout+0x150/0x2c0
=> kcompactd+0x9ca/0xc20
=> kthread+0x2f6/0x3d8
=> __ret_from_fork+0x8a/0xe8
=> 0x6b6b6b6b6b6b6b6b
This is because the code failed to add the one element containing the
number of entries to field_size.
Link: https://lkml.kernel.org/r/20230816154928.4171614-4-svens@linux.ibm.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 00cf3d672a9d ("tracing: Allow synthetic events to pass around stacktraces")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
While debugging another issue I noticed that the stack trace output
contains the number of entries on top:
<idle>-0 [000] d..4. 203.322502: wake_lat: pid=0 delta=2268270616 stack=STACK:
=> 0x10
=> __schedule+0xac6/0x1a98
=> schedule+0x126/0x2c0
=> schedule_timeout+0x242/0x2c0
=> __wait_for_common+0x434/0x680
=> __wait_rcu_gp+0x198/0x3e0
=> synchronize_rcu+0x112/0x138
=> ring_buffer_reset_online_cpus+0x140/0x2e0
=> tracing_reset_online_cpus+0x15c/0x1d0
=> tracing_set_clock+0x180/0x1d8
=> hist_register_trigger+0x486/0x670
=> event_hist_trigger_parse+0x494/0x1318
=> trigger_process_regex+0x1d4/0x258
=> event_trigger_write+0xb4/0x170
=> vfs_write+0x210/0xad0
=> ksys_write+0x122/0x208
Fix this by skipping the first element. Also replace the pointer
logic with an index variable which is easier to read.
Link: https://lkml.kernel.org/r/20230816154928.4171614-3-svens@linux.ibm.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 00cf3d672a9d ("tracing: Allow synthetic events to pass around stacktraces")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The current code uses a lot of casts to access the fields member in struct
synth_trace_events with different sizes. This makes the code hard to
read, and had already introduced an endianness bug. Use a union and struct
instead.
Link: https://lkml.kernel.org/r/20230816154928.4171614-2-svens@linux.ibm.com
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 00cf3d672a9dd ("tracing: Allow synthetic events to pass around stacktraces")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The goal is to eventually have a proper documentation about all this.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814164447.GFZNpZ/64H4lENIe94@fat_crate.local
|
|
Similar to how it doesn't make sense to have UNTRAIN_RET have two
untrain calls, it also doesn't make sense for VMEXIT to have an extra
IBPB call.
This cures VMEXIT doing potentially unret+IBPB or double IBPB.
Also, the (SEV) VMEXIT case seems to have been overlooked.
Redefine the meaning of the synthetic IBPB flags to:
- ENTRY_IBPB -- issue IBPB on entry (was: entry + VMEXIT)
- IBPB_ON_VMEXIT -- issue IBPB on VMEXIT
And have 'retbleed=ibpb' set *BOTH* feature flags to ensure it retains
the previous behaviour and issues IBPB on entry+VMEXIT.
The new 'srso=ibpb_vmexit' option only sets IBPB_ON_VMEXIT.
Create UNTRAIN_RET_VM specifically for the VMEXIT case, and have that
check IBPB_ON_VMEXIT.
All this avoids having the VMEXIT case having to check both ENTRY_IBPB
and IBPB_ON_VMEXIT and simplifies the alternatives.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121149.109557833@infradead.org
|
|
Since there can only be one active return_thunk, there only needs be
one (matching) untrain_ret. It fundamentally doesn't make sense to
allow multiple untrain_ret at the same time.
Fold all the 3 different untrain methods into a single (temporary)
helper stub.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121149.042774962@infradead.org
|
|
For a more consistent namespace.
[ bp: Fixup names in the doc too. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121148.976236447@infradead.org
|
|
Rename the original retbleed return thunk and untrain_ret to
retbleed_return_thunk() and retbleed_untrain_ret().
No functional changes.
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121148.909378169@infradead.org
|
|
Use the existing configurable return thunk. There is absolute no
justification for having created this __x86_return_thunk alternative.
To clarify, the whole thing looks like:
Zen3/4 does:
srso_alias_untrain_ret:
nop2
lfence
jmp srso_alias_return_thunk
int3
srso_alias_safe_ret: // aliasses srso_alias_untrain_ret just so
add $8, %rsp
ret
int3
srso_alias_return_thunk:
call srso_alias_safe_ret
ud2
While Zen1/2 does:
srso_untrain_ret:
movabs $foo, %rax
lfence
call srso_safe_ret (jmp srso_return_thunk ?)
int3
srso_safe_ret: // embedded in movabs instruction
add $8,%rsp
ret
int3
srso_return_thunk:
call srso_safe_ret
ud2
While retbleed does:
zen_untrain_ret:
test $0xcc, %bl
lfence
jmp zen_return_thunk
int3
zen_return_thunk: // embedded in the test instruction
ret
int3
Where Zen1/2 flush the BTB entry using the instruction decoder trick
(test,movabs) Zen3/4 use BTB aliasing. SRSO adds a return sequence
(srso_safe_ret()) which forces the function return instruction to
speculate into a trap (UD2). This RET will then mispredict and
execution will continue at the return site read from the top of the
stack.
Pick one of three options at boot (evey function can only ever return
once).
[ bp: Fixup commit message uarch details and add them in a comment in
the code too. Add a comment about the srso_select_mitigation()
dependency on retbleed_select_mitigation(). Add moar ifdeffery for
32-bit builds. Add a dummy srso_untrain_ret_alias() definition for
32-bit alternatives needing the symbol. ]
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121148.842775684@infradead.org
|
|
This reverts commit 27dd79c00aeab36cd7542c7a4481a32549038659.
It appears MPC_SPLIT_DYNAMIC still causes problems with multiple
displays on DCN2.0 hardware. Switch back to MPC_SPLIT_AVOID_MULT_DISP.
This increases power usage with multiple displays, but avoids hangs.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2475
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.4.x
|
|
DCN 3.1.4 is reported to hang on s2idle entry if graphics activity
is happening during entry. This is because GFXOFF was scheduled as
delayed but RLC gets disabled in s2idle entry sequence which will
hang GFX IP if not already in GFXOFF.
To help this problem, flush any delayed work for GFXOFF early in
s2idle entry sequence to ensure that it's off when RLC is changed.
commit 4b31b92b143f ("drm/amdgpu: complete gfxoff allow signal during
suspend without delay") modified power gating flow so that if called
in s0ix that it ensured that GFXOFF wasn't put in work queue but
instead processed immediately.
This is dead code due to commit 10cb67eb8a1b ("drm/amdgpu: skip
CG/PG for gfx during S0ix") because GFXOFF will now not be explicitly
called as part of the suspend entry code. Remove that dead code.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
GFX v11.0.1 reported fence fallback timer expired issue on
SDMA and GFX rings after S0ix resume. This is generated by
EOP interrupts are disabled when S0ix suspend but fails to
re-enable when resume because of the GFX is in GFXOFF.
[ 203.349571] [drm] Fence fallback timer expired on ring sdma0
[ 203.349572] [drm] Fence fallback timer expired on ring gfx_0.0.0
[ 203.861635] [drm] Fence fallback timer expired on ring gfx_0.0.0
For S0ix, GFX is in GFXOFF state, avoid to touch the GFX registers
to configure the fence driver interrupts for rings that belong to GFX.
The interrupts configuration will be restored by GFXOFF exit.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Return 0 when drm device alloc failed with -ENOSPC in
order to allow amdgpu drive loading. But the xcp without
drm device node assigned won't be visiable in user space.
This helps amdgpu driver loading on system which has more
than 64 nodes, the current limitation.
The proposal to add more drm nodes is discussed in public,
which will support up to 2^20 nodes totally.
kernel drm:
https://lore.kernel.org/lkml/20230724211428.3831636-1-michal.winiarski@intel.com/T/
libdrm:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/305
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update addresses of PCIE link width registers,
& link width format used to populate gpu metrics
table for smu v13.0.6
v2:
Removed ESM register update
v3:
Updated patch subject and message
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Temperature needs to be reported in millidegree Celsius.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use the right metrics table version based on the firmware.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2720
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Umio Yasuno <coelacanth_dream@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The parameter amdgpu_mcbp shall have priority against the default value
calculated from the chip version.
User could disable mcbp by setting the parameter mcbp as zero.
v2: do not trigger preemption in sw ring muxer when mcbp is disabled.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This testcase is constrived to reproduce a problem that the cpu buffers
become unavailable which is due to 'record_disabled' of array_buffer and
max_buffer being messed up.
Local test result after bugfix:
# ./ftracetest test.d/00basic/snapshot1.tc
=== Ftrace unit tests ===
[1] Snapshot and tracing_cpumask [PASS]
[2] (instance) Snapshot and tracing_cpumask [PASS]
# of passed: 2
# of failed: 0
# of unresolved: 0
# of untested: 0
# of unsupported: 0
# of xfailed: 0
# of undefined(test bug): 0
Link: https://lkml.kernel.org/r/20230805033816.3284594-3-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <vnagarnaik@google.com>
Cc: <shuah@kernel.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Trace ring buffer can no longer record anything after executing
following commands at the shell prompt:
# cd /sys/kernel/tracing
# cat tracing_cpumask
fff
# echo 0 > tracing_cpumask
# echo 1 > snapshot
# echo fff > tracing_cpumask
# echo 1 > tracing_on
# echo "hello world" > trace_marker
-bash: echo: write error: Bad file descriptor
The root cause is that:
1. After `echo 0 > tracing_cpumask`, 'record_disabled' of cpu buffers
in 'tr->array_buffer.buffer' became 1 (see tracing_set_cpumask());
2. After `echo 1 > snapshot`, 'tr->array_buffer.buffer' is swapped
with 'tr->max_buffer.buffer', then the 'record_disabled' became 0
(see update_max_tr());
3. After `echo fff > tracing_cpumask`, the 'record_disabled' become -1;
Then array_buffer and max_buffer are both unavailable due to value of
'record_disabled' is not 0.
To fix it, enable or disable both array_buffer and max_buffer at the same
time in tracing_set_cpumask().
Link: https://lkml.kernel.org/r/20230805033816.3284594-2-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <vnagarnaik@google.com>
Cc: <shuah@kernel.org>
Fixes: 71babb2705e2 ("tracing: change CPU ring buffer state from tracing_cpumask")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
