| Age | Commit message (Collapse) | Author |
|---|
|
Bryce reported that he saw the following with:
0: r6 = r1
1: r1 = 12
2: r0 = *(u16 *)skb[r1]
The xlated sequence was incorrectly clobbering r2 with pointer
value of r6 ...
0: (bf) r6 = r1
1: (b7) r1 = 12
2: (bf) r1 = r6
3: (bf) r2 = r1
4: (85) call bpf_skb_load_helper_16_no_cache#7692160
... and hence call to the load helper never succeeded given the
offset was too high. Fix it by reordering the load of r6 to r1.
Other than that the insn has similar calling convention than BPF
helpers, that is, r0 - r5 are scratch regs, so nothing else
affected after the insn.
Fixes: e0cea7ce988c ("bpf: implement ld_abs/ld_ind in native bpf")
Reported-by: Bryce Kahle <bryce.kahle@datadoghq.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/cace836e4d07bb63b1a53e49c5dfb238a040c298.1599512096.git.daniel@iogearbox.net
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.9-rc5
Here are some new device ids for 5.9.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.9-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: support dynamic Quectel USB compositions
USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules
USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter
|
|
syzbot reported a bug in ieee802154_tx() [1]
A similar issue in ieee802154_xmit_worker() is also fixed in this patch.
[1]
BUG: KASAN: use-after-free in ieee802154_tx+0x3d2/0x480 net/mac802154/tx.c:88
Read of size 4 at addr ffff8880251a8c70 by task syz-executor.3/928
CPU: 0 PID: 928 Comm: syz-executor.3 Not tainted 5.9.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x198/0x1fd lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
ieee802154_tx+0x3d2/0x480 net/mac802154/tx.c:88
ieee802154_subif_start_xmit+0xbe/0xe4 net/mac802154/tx.c:130
__netdev_start_xmit include/linux/netdevice.h:4634 [inline]
netdev_start_xmit include/linux/netdevice.h:4648 [inline]
dev_direct_xmit+0x4e9/0x6e0 net/core/dev.c:4203
packet_snd net/packet/af_packet.c:2989 [inline]
packet_sendmsg+0x2413/0x5290 net/packet/af_packet.c:3014
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:671
____sys_sendmsg+0x6e8/0x810 net/socket.c:2353
___sys_sendmsg+0xf3/0x170 net/socket.c:2407
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2440
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45d5b9
Code: 5d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fc98e749c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000000000002ccc0 RCX: 000000000045d5b9
RDX: 0000000000000000 RSI: 0000000020007780 RDI: 000000000000000b
RBP: 000000000118d020 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118cfec
R13: 00007fff690c720f R14: 00007fc98e74a9c0 R15: 000000000118cfec
Allocated by task 928:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:461
slab_post_alloc_hook mm/slab.h:518 [inline]
slab_alloc_node mm/slab.c:3254 [inline]
kmem_cache_alloc_node+0x136/0x3e0 mm/slab.c:3574
__alloc_skb+0x71/0x550 net/core/skbuff.c:198
alloc_skb include/linux/skbuff.h:1094 [inline]
alloc_skb_with_frags+0x92/0x570 net/core/skbuff.c:5771
sock_alloc_send_pskb+0x72a/0x880 net/core/sock.c:2348
packet_alloc_skb net/packet/af_packet.c:2837 [inline]
packet_snd net/packet/af_packet.c:2932 [inline]
packet_sendmsg+0x19fb/0x5290 net/packet/af_packet.c:3014
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:671
____sys_sendmsg+0x6e8/0x810 net/socket.c:2353
___sys_sendmsg+0xf3/0x170 net/socket.c:2407
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2440
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 928:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track+0x1c/0x30 mm/kasan/common.c:56
kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355
__kasan_slab_free+0xd8/0x120 mm/kasan/common.c:422
__cache_free mm/slab.c:3418 [inline]
kmem_cache_free.part.0+0x74/0x1e0 mm/slab.c:3693
kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:622
__kfree_skb net/core/skbuff.c:679 [inline]
consume_skb net/core/skbuff.c:838 [inline]
consume_skb+0xcf/0x160 net/core/skbuff.c:832
__dev_kfree_skb_any+0x9c/0xc0 net/core/dev.c:3107
fakelb_hw_xmit+0x20e/0x2a0 drivers/net/ieee802154/fakelb.c:81
drv_xmit_async net/mac802154/driver-ops.h:16 [inline]
ieee802154_tx+0x282/0x480 net/mac802154/tx.c:81
ieee802154_subif_start_xmit+0xbe/0xe4 net/mac802154/tx.c:130
__netdev_start_xmit include/linux/netdevice.h:4634 [inline]
netdev_start_xmit include/linux/netdevice.h:4648 [inline]
dev_direct_xmit+0x4e9/0x6e0 net/core/dev.c:4203
packet_snd net/packet/af_packet.c:2989 [inline]
packet_sendmsg+0x2413/0x5290 net/packet/af_packet.c:3014
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:671
____sys_sendmsg+0x6e8/0x810 net/socket.c:2353
___sys_sendmsg+0xf3/0x170 net/socket.c:2407
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2440
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff8880251a8c00
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 112 bytes inside of
224-byte region [ffff8880251a8c00, ffff8880251a8ce0)
The buggy address belongs to the page:
page:0000000062b6a4f1 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x251a8
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea0000435c88 ffffea00028b6c08 ffff8880a9055d00
raw: 0000000000000000 ffff8880251a80c0 000000010000000c 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880251a8b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880251a8b80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8880251a8c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880251a8c80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff8880251a8d00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
Fixes: 409c3b0c5f03 ("mac802154: tx: move stats tx increment")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Stefan Schmidt <stefan@datenfreihafen.org>
Cc: linux-wpan@vger.kernel.org
Link: https://lore.kernel.org/r/20200908104025.4009085-1-edumazet@google.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Buffers need to mapped to DMA channel's device pointer instead of SPI
controller's device pointer as its system DMA that actually does data
transfer.
Data inconsistencies have been reported when reading from flash
without this fix.
Fixes: ffa639e069fb ("mtd: spi-nor: cadence-quadspi: Add DMA support for direct mode reads")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/20200831130720.4524-1-vigneshr@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
mdadm relies on the fact that deleting an invalid partition returns
-ENXIO or -ENOTTY to detect if a block device is a partition or a
whole device.
Fixes: 08fc1ab6d748 ("block: fix locking in bdev_del_partition")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In commit 4f0b4352bd26 ("drm/i915: Extract cdclk requirements checking
to separate function") the order of force_min_cdclk_changed check and
intel_modeset_checks(), was reversed. This broke the mechanism to
immediately force a new CDCLK minimum, and lead to driver probe
errors for display audio on GLK platform with 5.9-rc1 kernel. Fix
the issue by moving intel_modeset_checks() call later.
[vsyrjala: It also broke the ability of planes to bump up the cdclk
and thus could lead to underruns when eg. flipping from 32bpp to
64bpp framebuffer. To be clear, we still compute the new cdclk
correctly but fail to actually program it to the hardware due to
intel_set_cdclk_{pre,post}_plane_update() not getting called on
account of state->modeset==false.]
Fixes: 4f0b4352bd26 ("drm/i915: Extract cdclk requirements checking to separate function")
BugLink: https://github.com/thesofproject/linux/issues/2410
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200901151036.1312357-1-kai.vehmanen@linux.intel.com
(cherry picked from commit cf696856bc54a31f78e6538b84c8f7a006b6108b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
... instead of using init_user_ns.
Fixes: 96518518cc41 ("netfilter: add nftables")
Tested-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The openvswitch module fails initialization when used in a kernel
without IPv6 enabled. nf_conncount_init() fails because the ct code
unconditionally tries to initialize the netns IPv6 related bit,
regardless of the build option. The change below ignores the IPv6
part if not enabled.
Note that the corresponding _put() function already has this IPv6
configuration check.
Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
conntrack mark based dump filtering may falsely skip entries if a mask
is given: If the mask-based check does not filter out the entry, the
else-if check is always true and compares the mark without considering
the mask. The if/else-if logic seems wrong.
Given that the mask during filter setup is implicitly set to 0xffffffff
if not specified explicitly, the mark filtering flags seem to just
complicate things. Restore the previously used approach by always
matching against a zero mask is no filter mark is given.
Fixes: cb8aa9a3affb ("netfilter: ctnetlink: add kernel side filtering for dump")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
On x86_64, each notification results in one skbuff allocation which
consumes at least 768 bytes due to the skbuff overhead.
This patch coalesces several notifications into one single skbuff, so
each notification consumes at least ~211 bytes, that ~3.5 times less
memory consumption. As a result, this is reducing the chances to exhaust
the netlink socket receive buffer.
Rule of thumb is that each notification batch only contains netlink
messages whose report flag is the same, nfnetlink_send() requires this
to do appropriate delivery to userspace, either via unicast (echo
mode) or multicast (monitor mode).
The skbuff control buffer is used to annotate the report flag for later
handling at the new coalescing routine.
The batch skbuff notification size is NLMSG_GOODSIZE, using a larger
skbuff would allow for more socket receiver buffer savings (to amortize
the cost of the skbuff even more), however, going over that size might
break userspace applications, so let's be conservative and stick to
NLMSG_GOODSIZE.
Reported-by: Phil Sutter <phil@nwl.cc>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The indexes to the nf_nat_l[34]protos arrays come from userspace. So
check the tuple's family, e.g. l3num, when creating the conntrack in
order to prevent an OOB memory access during setup. Here is an example
kernel panic on 4.14.180 when userspace passes in an index greater than
NFPROTO_NUMPROTO.
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:...
Process poc (pid: 5614, stack limit = 0x00000000a3933121)
CPU: 4 PID: 5614 Comm: poc Tainted: G S W O 4.14.180-g051355490483
Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150 Google Inc. MSM
task: 000000002a3dfffe task.stack: 00000000a3933121
pc : __cfi_check_fail+0x1c/0x24
lr : __cfi_check_fail+0x1c/0x24
...
Call trace:
__cfi_check_fail+0x1c/0x24
name_to_dev_t+0x0/0x468
nfnetlink_parse_nat_setup+0x234/0x258
ctnetlink_parse_nat_setup+0x4c/0x228
ctnetlink_new_conntrack+0x590/0xc40
nfnetlink_rcv_msg+0x31c/0x4d4
netlink_rcv_skb+0x100/0x184
nfnetlink_rcv+0xf4/0x180
netlink_unicast+0x360/0x770
netlink_sendmsg+0x5a0/0x6a4
___sys_sendmsg+0x314/0x46c
SyS_sendmsg+0xb4/0x108
el0_svc_naked+0x34/0x38
This crash is not happening since 5.4+, however, ctnetlink still
allows for creating entries with unsupported layer 3 protocol number.
Fixes: c1d10adb4a521 ("[NETFILTER]: Add ctnetlink port for nf_conntrack")
Signed-off-by: Will McVicker <willmcvicker@google.com>
[pablo@netfilter.org: rebased original patch on top of nf.git]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Commit d947fb4c965c ("cpuidle: pseries: Fixup exit latency for
CEDE(0)") sets the exit latency of CEDE(0) based on the latency values
of the Extended CEDE states advertised by the platform. The values
advertised by the platform are in timebase ticks. However the cpuidle
framework requires the latency values in microseconds.
If the tb-ticks value advertised by the platform correspond to a value
smaller than 1us, during the conversion from tb-ticks to microseconds,
in the current code, the result becomes zero. This is incorrect as it
puts a CEDE state on par with the snooze state.
This patch fixes this by rounding up the result obtained while
converting the latency value from tb-ticks to microseconds. It also
prints a warning in case we discover an extended-cede state with
wakeup latency to be 0. In such a case, ensure that CEDE(0) has a
non-zero wakeup latency.
Fixes: d947fb4c965c ("cpuidle: pseries: Fixup exit latency for CEDE(0)")
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1599125247-28488-1-git-send-email-ego@linux.vnet.ibm.com
|
|
timeout_usec value calculation was wrong, the calculated value
was in msec instead of usec.
Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Reviewed-by: Avi Fishman <avifishman70@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Alex Qiu <xqiu@google.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
These commits caused a regression on Lenovo t520 sandybridge
machine belonging to reporter. We are reverting them for 5.10
for other reasons, so just do it for 5.9 as well.
This reverts commit 7ac2d2536dfa71c275a74813345779b1e7522c91.
Reported-by: Harald Arnesen <harald@skogtun.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
These commits caused a regression on Lenovo t520 sandybridge
machine belonging to reporter. We are reverting them for 5.10
for other reasons, so just do it for 5.9 as well.
This reverts commit 9e0f9464e2ab36b864359a59b0e9058fdef0ce47.
Reported-by: Harald Arnesen <harald@skogtun.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
These commits caused a regression on Lenovo t520 sandybridge
machine belonging to reporter. We are reverting them for 5.10
for other reasons, so just do it for 5.9 as well.
This reverts commit 763fedd6a216f94c2eb98d2f7ca21be3d3806e69.
Reported-by: Harald Arnesen <harald@skogtun.org>
Signed-off-by: Dave Airlie <airied@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
A few fixes for a potential RPTR corruption issue.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGvnr6Nhz2J0sjv2G+j7iceVtaDiJDT8T88uW6jiBfOGKQ@mail.gmail.com
|
|
There are 2 problems with it:
1. "<" vs expected "<<"
2. the shift number is an IOMMU page number mask, not an address
mask as the IOMMU page shift is missing.
This did not hit us before f1565c24b596 ("powerpc: use the generic
dma_ops_bypass mode") because we had additional code to handle bypass
mask so this chunk (almost?) never executed.However there were
reports that aacraid does not work with "iommu=nobypass".
After f1565c24b596, aacraid (and probably others which call
dma_get_required_mask() before setting the mask) was unable to enable
64bit DMA and fall back to using IOMMU which was known not to work,
one of the problems is double free of an IOMMU page.
This fixes DMA for aacraid, both with and without "iommu=nobypass" in
the kernel command line. Verified with "stress-ng -d 4".
Fixes: 6a5c7be5e484 ("powerpc: Override dma_get_required_mask by platform hook and ops")
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200908015106.79661-1-aik@ozlabs.ru
|
|
mlx5_suspend()/resume() keep the network interface, so during hibernation
netvsc_unregister_vf() and netvsc_register_vf() are not called, and hence
netvsc_resume() should call netvsc_vf_changed() to switch the data path
back to the VF after hibernation. Note: after we close and re-open the
vmbus channel of the netvsc NIC in netvsc_suspend() and netvsc_resume(),
the data path is implicitly switched to the netvsc NIC. Similarly,
netvsc_suspend() should not call netvsc_unregister_vf(), otherwise the VF
can no longer be used after hibernation.
For mlx4, since the VF network interafce is explicitly destroyed and
re-created during hibernation (see mlx4_suspend()/resume()), hv_netvsc
already explicitly switches the data path from and to the VF automatically
via netvsc_register_vf() and netvsc_unregister_vf(), so mlx4 doesn't need
this fix. Note: mlx4 can still work with the fix because in
netvsc_suspend()/resume() ndev_ctx->vf_netdev is NULL for mlx4.
Fixes: 0efeea5fb153 ("hv_netvsc: Add the support of hibernation")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 8d7e5dee972f1cde2ba96c621f1541fa36e7d4f4.
To protect netns id, the nsid_lock is used when netns id is being
allocated and removed by peernet2id_alloc() and unhash_nsid().
The nsid_lock can be used in BH context but only spin_lock() is used
in this code.
Using spin_lock() instead of spin_lock_bh() can result in a deadlock in
the following scenario reported by the lockdep.
In order to avoid a deadlock, the spin_lock_bh() should be used instead
of spin_lock() to acquire nsid_lock.
Test commands:
ip netns del nst
ip netns add nst
ip link add veth1 type veth peer name veth2
ip link set veth1 netns nst
ip netns exec nst ip link add name br1 type bridge vlan_filtering 1
ip netns exec nst ip link set dev br1 up
ip netns exec nst ip link set dev veth1 master br1
ip netns exec nst ip link set dev veth1 up
ip netns exec nst ip link add macvlan0 link br1 up type macvlan
Splat looks like:
[ 33.615860][ T607] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[ 33.617194][ T607] 5.9.0-rc1+ #665 Not tainted
[ ... ]
[ 33.670615][ T607] Chain exists of:
[ 33.670615][ T607] &mc->mca_lock --> &bridge_netdev_addr_lock_key --> &net->nsid_lock
[ 33.670615][ T607]
[ 33.673118][ T607] Possible interrupt unsafe locking scenario:
[ 33.673118][ T607]
[ 33.674599][ T607] CPU0 CPU1
[ 33.675557][ T607] ---- ----
[ 33.676516][ T607] lock(&net->nsid_lock);
[ 33.677306][ T607] local_irq_disable();
[ 33.678517][ T607] lock(&mc->mca_lock);
[ 33.679725][ T607] lock(&bridge_netdev_addr_lock_key);
[ 33.681166][ T607] <Interrupt>
[ 33.681791][ T607] lock(&mc->mca_lock);
[ 33.682579][ T607]
[ 33.682579][ T607] *** DEADLOCK ***
[ ... ]
[ 33.922046][ T607] stack backtrace:
[ 33.922999][ T607] CPU: 3 PID: 607 Comm: ip Not tainted 5.9.0-rc1+ #665
[ 33.924099][ T607] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 33.925714][ T607] Call Trace:
[ 33.926238][ T607] dump_stack+0x78/0xab
[ 33.926905][ T607] check_irq_usage+0x70b/0x720
[ 33.927708][ T607] ? iterate_chain_key+0x60/0x60
[ 33.928507][ T607] ? check_path+0x22/0x40
[ 33.929201][ T607] ? check_noncircular+0xcf/0x180
[ 33.930024][ T607] ? __lock_acquire+0x1952/0x1f20
[ 33.930860][ T607] __lock_acquire+0x1952/0x1f20
[ 33.931667][ T607] lock_acquire+0xaf/0x3a0
[ 33.932366][ T607] ? peernet2id_alloc+0x3a/0x170
[ 33.933147][ T607] ? br_port_fill_attrs+0x54c/0x6b0 [bridge]
[ 33.934140][ T607] ? br_port_fill_attrs+0x5de/0x6b0 [bridge]
[ 33.935113][ T607] ? kvm_sched_clock_read+0x14/0x30
[ 33.935974][ T607] _raw_spin_lock+0x30/0x70
[ 33.936728][ T607] ? peernet2id_alloc+0x3a/0x170
[ 33.937523][ T607] peernet2id_alloc+0x3a/0x170
[ 33.938313][ T607] rtnl_fill_ifinfo+0xb5e/0x1400
[ 33.939091][ T607] rtmsg_ifinfo_build_skb+0x8a/0xf0
[ 33.939953][ T607] rtmsg_ifinfo_event.part.39+0x17/0x50
[ 33.940863][ T607] rtmsg_ifinfo+0x1f/0x30
[ 33.941571][ T607] __dev_notify_flags+0xa5/0xf0
[ 33.942376][ T607] ? __irq_work_queue_local+0x49/0x50
[ 33.943249][ T607] ? irq_work_queue+0x1d/0x30
[ 33.943993][ T607] ? __dev_set_promiscuity+0x7b/0x1a0
[ 33.944878][ T607] __dev_set_promiscuity+0x7b/0x1a0
[ 33.945758][ T607] dev_set_promiscuity+0x1e/0x50
[ 33.946582][ T607] br_port_set_promisc+0x1f/0x40 [bridge]
[ 33.947487][ T607] br_manage_promisc+0x8b/0xe0 [bridge]
[ 33.948388][ T607] __dev_set_promiscuity+0x123/0x1a0
[ 33.949244][ T607] __dev_set_rx_mode+0x68/0x90
[ 33.950021][ T607] dev_uc_add+0x50/0x60
[ 33.950720][ T607] macvlan_open+0x18e/0x1f0 [macvlan]
[ 33.951601][ T607] __dev_open+0xd6/0x170
[ 33.952269][ T607] __dev_change_flags+0x181/0x1d0
[ 33.953056][ T607] rtnl_configure_link+0x2f/0xa0
[ 33.953884][ T607] __rtnl_newlink+0x6b9/0x8e0
[ 33.954665][ T607] ? __lock_acquire+0x95d/0x1f20
[ 33.955450][ T607] ? lock_acquire+0xaf/0x3a0
[ 33.956193][ T607] ? is_bpf_text_address+0x5/0xe0
[ 33.956999][ T607] rtnl_newlink+0x47/0x70
Acked-by: Guillaume Nault <gnault@redhat.com>
Fixes: 8d7e5dee972f ("netns: don't disable BHs when locking "nsid_lock"")
Reported-by: syzbot+3f960c64a104eaa2c813@syzkaller.appspotmail.com
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Indentation and logic clearly show that this code is missing
parenthesis.
Fixes: 9f1345737790 ("ibmvnic fix NULL tx_pools and rx_tools issue at do_reset")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix kernel-doc warning in <linux/netdevice.h>:
../include/linux/netdevice.h:2158: warning: Function parameter or member 'xdp_state' not described in 'net_device'
Fixes: 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix kernel-doc warning in <linux/netdevice.h>:
../include/linux/netdevice.h:2158: warning: Function parameter or member 'proto_down_reason' not described in 'net_device'
Fixes: 829eb208e80d ("rtnetlink: add support for protodown reason")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When trying to get a new fs root for a snapshot during the transaction
at transaction.c:create_pending_snapshot(), if btrfs_get_new_fs_root()
fails we leave "pending->snap" pointing to an error pointer, and then
later at ioctl.c:create_snapshot() we dereference that pointer, resulting
in a crash:
[12264.614689] BUG: kernel NULL pointer dereference, address: 00000000000007c4
[12264.615650] #PF: supervisor write access in kernel mode
[12264.616487] #PF: error_code(0x0002) - not-present page
[12264.617436] PGD 0 P4D 0
[12264.618328] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[12264.619150] CPU: 0 PID: 2310635 Comm: fsstress Tainted: G W 5.9.0-rc3-btrfs-next-67 #1
[12264.619960] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[12264.621769] RIP: 0010:btrfs_mksubvol+0x438/0x4a0 [btrfs]
[12264.622528] Code: bc ef ff ff (...)
[12264.624092] RSP: 0018:ffffaa6fc7277cd8 EFLAGS: 00010282
[12264.624669] RAX: 00000000fffffff4 RBX: ffff9d3e8f151a60 RCX: 0000000000000000
[12264.625249] RDX: 0000000000000001 RSI: ffffffff9d56c9be RDI: fffffffffffffff4
[12264.625830] RBP: ffff9d3e8f151b48 R08: 0000000000000000 R09: 0000000000000000
[12264.626413] R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffff4
[12264.626994] R13: ffff9d3ede380538 R14: ffff9d3ede380500 R15: ffff9d3f61b2eeb8
[12264.627582] FS: 00007f140d5d8200(0000) GS:ffff9d3fb5e00000(0000) knlGS:0000000000000000
[12264.628176] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[12264.628773] CR2: 00000000000007c4 CR3: 000000020f8e8004 CR4: 00000000003706f0
[12264.629379] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[12264.629994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[12264.630594] Call Trace:
[12264.631227] btrfs_mksnapshot+0x7b/0xb0 [btrfs]
[12264.631840] __btrfs_ioctl_snap_create+0x16f/0x1a0 [btrfs]
[12264.632458] btrfs_ioctl_snap_create_v2+0xb0/0xf0 [btrfs]
[12264.633078] btrfs_ioctl+0x1864/0x3130 [btrfs]
[12264.633689] ? do_sys_openat2+0x1a7/0x2d0
[12264.634295] ? kmem_cache_free+0x147/0x3a0
[12264.634899] ? __x64_sys_ioctl+0x83/0xb0
[12264.635488] __x64_sys_ioctl+0x83/0xb0
[12264.636058] do_syscall_64+0x33/0x80
[12264.636616] entry_SYSCALL_64_after_hwframe+0x44/0xa9
(gdb) list *(btrfs_mksubvol+0x438)
0x7c7b8 is in btrfs_mksubvol (fs/btrfs/ioctl.c:858).
853 ret = 0;
854 pending_snapshot->anon_dev = 0;
855 fail:
856 /* Prevent double freeing of anon_dev */
857 if (ret && pending_snapshot->snap)
858 pending_snapshot->snap->anon_dev = 0;
859 btrfs_put_root(pending_snapshot->snap);
860 btrfs_subvolume_release_metadata(root, &pending_snapshot->block_rsv);
861 free_pending:
862 if (pending_snapshot->anon_dev)
So fix this by setting "pending->snap" to NULL if we get an error from the
call to btrfs_get_new_fs_root() at transaction.c:create_pending_snapshot().
Fixes: 2dfb1e43f57dd3 ("btrfs: preallocate anon block device at first phase of snapshot creation")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Michael Chan says:
====================
bnxt_en: Two bug fixes.
The first patch fixes AER recovery by reducing the time from several
minutes to a more reasonable 20 - 30 seconds. The second patch fixes
a possible NULL pointer crash during firmware reset.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_fw_reset_task() which runs from a workqueue can race with
bnxt_remove_one(). For example, if firmware reset and VF FLR are
happening at about the same time.
bnxt_remove_one() already cancels the workqueue and waits for it
to finish, but we need to do this earlier before the devlink
reporters are destroyed. This will guarantee that
the devlink reporters will always be valid when bnxt_fw_reset_task()
is still running.
Fixes: b148bb238c02 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the driver goes through PCIe AER reset in error state, all
firmware messages will timeout because the PCIe bus is no longer
accessible. This can lead to AER reset taking many minutes to
complete as each firmware command takes time to timeout.
Define a new macro BNXT_NO_FW_ACCESS() to skip these firmware messages
when either firmware is in fatal error state or when
pci_channel_offline() is true. It now takes a more reasonable 20 to
30 seconds to complete AER recovery.
Fixes: b4fff2079d10 ("bnxt_en: Do not send firmware messages if firmware is in error state.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Alternate modes
According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
0.7, bits 4 and 5 are reserved in Alternate modes.
SBU Orientation and HSL Orientation needs to be configured only during
initial cable detection in USB connect flow based on device property of
"sbu-orientation" and "hsl-orientation".
Configuring these reserved bits in the Alternate modes may result in delay
in display link training or some unexpected behaviour.
So do not configure them while issuing Alternate Mode requests.
Fixes: ff4a30d5e243 ("usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation")
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200907142152.35678-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
0.7, bit 14 is reserved in Alternate mode.
In DP Alternate Mode state, if the HPD_STATE (bit 7) field in the
status update command VDO is set to HPD_HIGH, HPD is configured via
separate HPD mode request after configuring DP Alternate mode request.
Configuring reserved bit may show unexpected behaviour.
So do not configure them while issuing the Alternate Mode request.
Fixes: 7990be48ef4d ("usb: typec: mux: intel: Handle alt mode HPD_HIGH")
Cc: stable@vger.kernel.org
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200907142152.35678-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
when COMPILED_SOURCE is set, running 'make ARCH=x86_64 COMPILED_SOURCE=1
cscope tags' in KBUILD_OUTPUT directory produces lots of "No such file
or directory" warnings:
...
realpath: sigchain.h: No such file or directory
realpath: orc_gen.c: No such file or directory
realpath: objtool.c: No such file or directory
...
let's exclude tools directory from tags generation
Fixes: 4f491bb6ea2a ("scripts/tags.sh: collect compiled source precisely")
Link: https://lore.kernel.org/lkml/20200809210056.GA1344537@thinkpad
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Link: https://lore.kernel.org/r/20200810153650.1822316-1-rkovhaev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While testing a weird problem with -o degraded, I noticed I was getting
leaked root errors
BTRFS warning (device loop0): writable mount is not allowed due to too many missing devices
BTRFS error (device loop0): open_ctree failed
BTRFS error (device loop0): leaked root -9-0 refcount 1
This is the DATA_RELOC root, which gets read before the other fs roots,
but is included in the fs roots radix tree. Handle this by adding a
btrfs_drop_and_free_fs_root() on the data reloc root if it exists. This
is ok to do here if we fail further up because we will only drop the ref
if we delete the root from the radix tree, and all other cleanup won't
be duplicated.
CC: stable@vger.kernel.org # 5.8+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
A completely sane converted fs will cause kernel warning at balance
time:
[ 1557.188633] BTRFS info (device sda7): relocating block group 8162107392 flags data
[ 1563.358078] BTRFS info (device sda7): found 11722 extents
[ 1563.358277] BTRFS info (device sda7): leaf 7989321728 gen 95 total ptrs 213 free space 3458 owner 2
[ 1563.358280] item 0 key (7984947200 169 0) itemoff 16250 itemsize 33
[ 1563.358281] extent refs 1 gen 90 flags 2
[ 1563.358282] ref#0: tree block backref root 4
[ 1563.358285] item 1 key (7985602560 169 0) itemoff 16217 itemsize 33
[ 1563.358286] extent refs 1 gen 93 flags 258
[ 1563.358287] ref#0: shared block backref parent 7985602560
[ 1563.358288] (parent 7985602560 is NOT ALIGNED to nodesize 16384)
[ 1563.358290] item 2 key (7985635328 169 0) itemoff 16184 itemsize 33
...
[ 1563.358995] BTRFS error (device sda7): eb 7989321728 invalid extent inline ref type 182
[ 1563.358996] ------------[ cut here ]------------
[ 1563.359005] WARNING: CPU: 14 PID: 2930 at 0xffffffff9f231766
Then with transaction abort, and obviously failed to balance the fs.
[CAUSE]
That mentioned inline ref type 182 is completely sane, it's
BTRFS_SHARED_BLOCK_REF_KEY, it's some extra check making kernel to
believe it's invalid.
Commit 64ecdb647ddb ("Btrfs: add one more sanity check for shared ref
type") introduced extra checks for backref type.
One of the requirement is, parent bytenr must be aligned to node size,
which is not correct.
One example is like this:
0 1G 1G+4K 2G 2G+4K
| |///////////////////|//| <- A chunk starts at 1G+4K
| | <- A tree block get reserved at bytenr 1G+4K
Then we have a valid tree block at bytenr 1G+4K, but not aligned to
nodesize (16K).
Such chunk is not ideal, but current kernel can handle it pretty well.
We may warn about such tree block in the future, but should not reject
them.
[FIX]
Change the alignment requirement from node size alignment to sector size
alignment.
Also, to make our lives a little easier, also output @iref when
btrfs_get_extent_inline_ref_type() failed, so we can locate the item
easier.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205475
Fixes: 64ecdb647ddb ("Btrfs: add one more sanity check for shared ref type")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ update comments and messages ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Nikolay reported a lockdep splat in generic/476 that I could reproduce
with btrfs/187.
======================================================
WARNING: possible circular locking dependency detected
5.9.0-rc2+ #1 Tainted: G W
------------------------------------------------------
kswapd0/100 is trying to acquire lock:
ffff9e8ef38b6268 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x3f/0x330
but task is already holding lock:
ffffffffa9d74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0x65/0x80
slab_pre_alloc_hook.constprop.0+0x20/0x200
kmem_cache_alloc_trace+0x3a/0x1a0
btrfs_alloc_device+0x43/0x210
add_missing_dev+0x20/0x90
read_one_chunk+0x301/0x430
btrfs_read_sys_array+0x17b/0x1b0
open_ctree+0xa62/0x1896
btrfs_mount_root.cold+0x12/0xea
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
vfs_kern_mount.part.0+0x71/0xb0
btrfs_mount+0x10d/0x379
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
path_mount+0x434/0xc00
__x64_sys_mount+0xe3/0x120
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}:
__mutex_lock+0x7e/0x7e0
btrfs_chunk_alloc+0x125/0x3a0
find_free_extent+0xdf6/0x1210
btrfs_reserve_extent+0xb3/0x1b0
btrfs_alloc_tree_block+0xb0/0x310
alloc_tree_block_no_bg_flush+0x4a/0x60
__btrfs_cow_block+0x11a/0x530
btrfs_cow_block+0x104/0x220
btrfs_search_slot+0x52e/0x9d0
btrfs_lookup_inode+0x2a/0x8f
__btrfs_update_delayed_inode+0x80/0x240
btrfs_commit_inode_delayed_inode+0x119/0x120
btrfs_evict_inode+0x357/0x500
evict+0xcf/0x1f0
vfs_rmdir.part.0+0x149/0x160
do_rmdir+0x136/0x1a0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&delayed_node->mutex){+.+.}-{3:3}:
__lock_acquire+0x1184/0x1fa0
lock_acquire+0xa4/0x3d0
__mutex_lock+0x7e/0x7e0
__btrfs_release_delayed_node.part.0+0x3f/0x330
btrfs_evict_inode+0x24c/0x500
evict+0xcf/0x1f0
dispose_list+0x48/0x70
prune_icache_sb+0x44/0x50
super_cache_scan+0x161/0x1e0
do_shrink_slab+0x178/0x3c0
shrink_slab+0x17c/0x290
shrink_node+0x2b2/0x6d0
balance_pgdat+0x30a/0x670
kswapd+0x213/0x4c0
kthread+0x138/0x160
ret_from_fork+0x1f/0x30
other info that might help us debug this:
Chain exists of:
&delayed_node->mutex --> &fs_info->chunk_mutex --> fs_reclaim
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(&fs_info->chunk_mutex);
lock(fs_reclaim);
lock(&delayed_node->mutex);
*** DEADLOCK ***
3 locks held by kswapd0/100:
#0: ffffffffa9d74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
#1: ffffffffa9d65c50 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x115/0x290
#2: ffff9e8e9da260e0 (&type->s_umount_key#48){++++}-{3:3}, at: super_cache_scan+0x38/0x1e0
stack backtrace:
CPU: 1 PID: 100 Comm: kswapd0 Tainted: G W 5.9.0-rc2+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack+0x92/0xc8
check_noncircular+0x12d/0x150
__lock_acquire+0x1184/0x1fa0
lock_acquire+0xa4/0x3d0
? __btrfs_release_delayed_node.part.0+0x3f/0x330
__mutex_lock+0x7e/0x7e0
? __btrfs_release_delayed_node.part.0+0x3f/0x330
? __btrfs_release_delayed_node.part.0+0x3f/0x330
? lock_acquire+0xa4/0x3d0
? btrfs_evict_inode+0x11e/0x500
? find_held_lock+0x2b/0x80
__btrfs_release_delayed_node.part.0+0x3f/0x330
btrfs_evict_inode+0x24c/0x500
evict+0xcf/0x1f0
dispose_list+0x48/0x70
prune_icache_sb+0x44/0x50
super_cache_scan+0x161/0x1e0
do_shrink_slab+0x178/0x3c0
shrink_slab+0x17c/0x290
shrink_node+0x2b2/0x6d0
balance_pgdat+0x30a/0x670
kswapd+0x213/0x4c0
? _raw_spin_unlock_irqrestore+0x46/0x60
? add_wait_queue_exclusive+0x70/0x70
? balance_pgdat+0x670/0x670
kthread+0x138/0x160
? kthread_create_worker_on_cpu+0x40/0x40
ret_from_fork+0x1f/0x30
This is because we are holding the chunk_mutex when we call
btrfs_alloc_device, which does a GFP_KERNEL allocation. We don't want
to switch that to a GFP_NOFS lock because this is the only place where
it matters. So instead use memalloc_nofs_save() around the allocation
in order to avoid the lockdep splat.
Reported-by: Nikolay Borisov <nborisov@suse.com>
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix kernel-doc warning in <linux/device.h>:
../include/linux/device.h:613: warning: Function parameter or member 'em_pd' not described in 'device'
Fixes: 1bc138c62295 ("PM / EM: add support for other devices than CPUs in Energy Model")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/d97f40ad-3033-703a-c3cb-2843ce0f6371@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I found this when compiling a kbuild random config with GCC 11. The
config enables CONFIG_DEBUG_SECTION_MISMATCH, which sets CFLAGS
-fno-inline-functions-called-once. This causes the call to cache_loop in
cache.c to not be inlined causing the below compile error.
In file included from arch/openrisc/mm/cache.c:13:
arch/openrisc/mm/cache.c: In function 'cache_loop':
./arch/openrisc/include/asm/spr.h:16:27: warning: 'asm' operand 0 probably does not match constraints
16 | #define mtspr(_spr, _val) __asm__ __volatile__ ( \
| ^~~~~~~
arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr'
25 | mtspr(reg, line);
| ^~~~~
./arch/openrisc/include/asm/spr.h:16:27: error: impossible constraint in 'asm'
16 | #define mtspr(_spr, _val) __asm__ __volatile__ ( \
| ^~~~~~~
arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr'
25 | mtspr(reg, line);
| ^~~~~
make[1]: *** [scripts/Makefile.build:283: arch/openrisc/mm/cache.o] Error 1
The asm constraint "K" requires a immediate constant argument to mtspr,
however because of no inlining a register argument is passed causing a
failure. Fix this by using __always_inline.
Link: https://lore.kernel.org/lkml/202008200453.ohnhqkjQ%25lkp@intel.com/
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
Recently OpenRISC added support for external initrd images, but I found
some instability when using larger buildroot initrd images. It turned
out that I forgot to reserve the memblock space for the initrd image.
This patch fixes the instability issue by reserving memblock space.
Fixes: ff6c923dbec3 ("openrisc: Add support for external initrd images")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
|
|
The 'spi_stm32 44004000.spi: Communication suspended' message means that
when using PIO, the kernel did not read the FIFO fast enough and so the
SPI controller paused the transfer. Currently, this is printed on every
single such event, so if the kernel is busy and the controller is pausing
the transfers often, the kernel will be all the more busy scrolling this
message into the log buffer every few milliseconds. That is not helpful.
Instead, rate-limit the message and print it every once in a while. It is
not possible to use the default dev_warn_ratelimited(), because that is
still too verbose, as it prints 10 lines (DEFAULT_RATELIMIT_BURST) every
5 seconds (DEFAULT_RATELIMIT_INTERVAL). The policy here is to print 1 line
every 50 seconds (DEFAULT_RATELIMIT_INTERVAL * 10), because 1 line is more
than enough and the cycles saved on printing are better left to the CPU to
handle the SPI. However, dev_warn_once() is also not useful, as the user
should be aware that this condition is possibly recurring or ongoing. Thus
the custom rate-limit policy.
Finally, turn the message from dev_warn() to dev_dbg(), since the system
does not suffer any sort of malfunction if this message appears, it is
just slowing down. This further reduces the printing into the log buffer
and frees the CPU to do useful work.
Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Cc: Antonio Borneo <borneo.antonio@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200905151913.117775-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce for_each_rtd_dais_rollback macro which behaves exactly like
for_each_codec_dais_rollback and its cpu_dais equivalent but for all
dais instead.
Use newly added macro to fix soc_pcm_open error path and prevent
uninitialized dais from being cleaned-up.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Fixes: 5d9fa03e6c35 ("ASoC: soc-pcm: tidyup soc_pcm_open() order")
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200907111939.16169-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It turns out that currently we rely only on sysfs attribute
permissions:
$ ll /sys/bus/rbd/{add*,remove*}
--w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/add
--w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/add_single_major
--w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/remove
--w------- 1 root root 4096 Sep 3 20:38 /sys/bus/rbd/remove_single_major
This means that images can be mapped and unmapped (i.e. block devices
can be created and deleted) by a UID 0 process even after it drops all
privileges or by any process with CAP_DAC_OVERRIDE in its user namespace
as long as UID 0 is mapped into that user namespace.
Be consistent with other virtual block devices (loop, nbd, dm, md, etc)
and require CAP_SYS_ADMIN in the initial user namespace for mapping and
unmapping, and also for dumping the configuration string and refreshing
the image header.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
|
|
__kobject_del() is called from two places, in one where kobj is dereferenced
before and thus can't be NULL, and in the other the NULL check is done before
call. Drop unneeded conditional in __kobject_del().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20200803083520.5460-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch causes a regression betwen Kernel 5.7 and 5.8 at wlcore:
with it applied, WiFi stops working, and the Kernel starts printing
this message every second:
wlcore: PHY firmware version: Rev 8.2.0.0.242
wlcore: firmware booted (Rev 8.9.0.0.79)
wlcore: ERROR command execute failure 14
------------[ cut here ]------------
WARNING: CPU: 0 PID: 133 at drivers/net/wireless/ti/wlcore/main.c:795 wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore]
Modules linked in: wl18xx wlcore mac80211 libarc4 cfg80211 rfkill snd_soc_hdmi_codec crct10dif_ce wlcore_sdio adv7511 cec kirin9xx_drm(C) kirin9xx_dw_drm_dsi(C) drm_kms_helper drm ip_tables x_tables ipv6 nf_defrag_ipv6
CPU: 0 PID: 133 Comm: kworker/0:1 Tainted: G WC 5.8.0+ #186
Hardware name: HiKey970 (DT)
Workqueue: events_freezable ieee80211_restart_work [mac80211]
pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
pc : wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore]
lr : wl12xx_queue_recovery_work+0x24/0x30 [wlcore]
sp : ffff8000126c3a60
x29: ffff8000126c3a60 x28: 00000000000025de
x27: 0000000000000010 x26: 0000000000000005
x25: ffff0001a5d49e80 x24: ffff8000092cf580
x23: ffff0001b7c12623 x22: ffff0001b6fcf2e8
x21: ffff0001b7e46200 x20: 00000000fffffffb
x19: ffff0001a78e6400 x18: 0000000000000030
x17: 0000000000000001 x16: 0000000000000001
x15: ffff0001b7e46670 x14: ffffffffffffffff
x13: ffff8000926c37d7 x12: ffff8000126c37e0
x11: ffff800011e01000 x10: ffff8000120526d0
x9 : 0000000000000000 x8 : 3431206572756c69
x7 : 6166206574756365 x6 : 0000000000000c2c
x5 : 0000000000000000 x4 : ffff0001bf1361e8
x3 : ffff0001bf1790b0 x2 : 0000000000000000
x1 : ffff0001a5d49e80 x0 : 0000000000000001
Call trace:
wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore]
wl12xx_queue_recovery_work+0x24/0x30 [wlcore]
wl1271_cmd_set_sta_key+0x258/0x25c [wlcore]
wl1271_set_key+0x7c/0x2dc [wlcore]
wlcore_set_key+0xe4/0x360 [wlcore]
wl18xx_set_key+0x48/0x1d0 [wl18xx]
wlcore_op_set_key+0xa4/0x180 [wlcore]
ieee80211_key_enable_hw_accel+0xb0/0x2d0 [mac80211]
ieee80211_reenable_keys+0x70/0x110 [mac80211]
ieee80211_reconfig+0xa00/0xca0 [mac80211]
ieee80211_restart_work+0xc4/0xfc [mac80211]
process_one_work+0x1cc/0x350
worker_thread+0x13c/0x470
kthread+0x154/0x160
ret_from_fork+0x10/0x30
---[ end trace b1f722abf9af5919 ]---
wlcore: WARNING could not set keys
wlcore: ERROR Could not add or replace key
wlan0: failed to set key (4, ff:ff:ff:ff:ff:ff) to hardware (-5)
wlcore: Hardware recovery in progress. FW ver: Rev 8.9.0.0.79
wlcore: pc: 0x0, hint_sts: 0x00000040 count: 39
wlcore: down
wlcore: down
ieee80211 phy0: Hardware restart was requested
mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
wlcore: PHY firmware version: Rev 8.2.0.0.242
wlcore: firmware booted (Rev 8.9.0.0.79)
wlcore: ERROR command execute failure 14
------------[ cut here ]------------
Tested on Hikey 970.
This reverts commit 2b7aadd3b9e17e8b81eeb8d9cc46756ae4658265.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/f0a2cb7ea606f1a284d4c23cbf983da2954ce9b6.1598420968.git.mchehab+huawei@kernel.org
|
|
The GX502 requires a few steps to enable the headset i/o: pincfg,
verbs to enable and unmute the amp used for headpone out, and
a jacksense callback to toggle output via internal or jack using
a verb.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208005
Link: https://lore.kernel.org/r/20200907081959.56186-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
SDHCI changed from using a tasklet to finish requests, to using an IRQ
thread i.e. commit c07a48c2651965 ("mmc: sdhci: Remove finish_tasklet").
Because this increased the latency to complete requests, a preparatory
change was made to complete the request from the IRQ handler if
possible i.e. commit 19d2f695f4e827 ("mmc: sdhci: Call mmc_request_done()
from IRQ handler if possible"). That alleviated the situation for MMC
block devices because the MMC block driver makes use of mmc_pre_req()
and mmc_post_req() so that successful requests are completed in the IRQ
handler and any DMA unmapping is handled separately in mmc_post_req().
However SDIO was still affected, and an example has been reported with
up to 20% degradation in performance.
Looking at SDIO I/O helper functions, sdio_io_rw_ext_helper() appeared
to be a possible candidate for making use of asynchronous requests
within its I/O loops, but analysis revealed that these loops almost
never iterate more than once, so the complexity of the change would not
be warrented.
Instead, mmc_pre_req() and mmc_post_req() are added before and after I/O
submission (mmc_wait_for_req) in mmc_io_rw_extended(). This still has
the potential benefit of reducing the duration of interrupt handlers, as
well as addressing the latency issue for SDHCI. It also seems a more
reasonable solution than forcing drivers to do everything in the IRQ
handler.
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Fixes: c07a48c2651965 ("mmc: sdhci: Remove finish_tasklet")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200903082007.18715-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Commit b214fe592ab7 ("mmc: sdhci-of-esdhc: add erratum eSDHC7 support")
added code to check for a specific compatible string in the device-tree
on every esdhc interrupat. Instead of doing this record the quirk in
struct sdhci_esdhc and lookup the struct in esdhc_irq.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20200903012029.25673-1-chris.packham@alliedtelesis.co.nz
Fixes: b214fe592ab7 ("mmc: sdhci-of-esdhc: add erratum eSDHC7 support")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The commit cd57d07b1e4e ("sh: don't allow non-coherent DMA for NOMMU") made
CONFIG_NO_DMA to be set for some platforms, for good reasons.
Consequentially, CONFIG_HAS_DMA doesn't get set, which makes the DMA
mapping interface to be built as stub functions, but also prevent the
mmc_spi driver from being built as it depends on CONFIG_HAS_DMA.
It turns out that for some odd cases, the driver still relied on the DMA
mapping interface, even if the DMA was not actively being used.
To fixup the behaviour, let's drop the build dependency for CONFIG_HAS_DMA.
Moreover, as to allow the driver to succeed probing, let's move the DMA
initializations behind "#ifdef CONFIG_HAS_DMA".
Fixes: cd57d07b1e4e ("sh: don't allow non-coherent DMA for NOMMU")
Reported-by: Rich Felker <dalias@libc.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Rich Felker <dalias@libc.org>
Link: https://lore.kernel.org/r/20200901150438.228887-1-ulf.hansson@linaro.org
|
|
As the comments in this patch say, if we tune and find all phases are
valid it's _almost_ as bad as no phases being found valid. Probably
all phases are not really reliable but we didn't detect where the
unreliable place is. That means we'll essentially be guessing and
hoping we get a good phase.
This is not just a problem in theory. It was causing real problems on
a real board. On that board, most often phase 10 is found as the only
invalid phase, though sometimes 10 and 11 are invalid and sometimes
just 11. Some percentage of the time, however, all phases are found
to be valid. When this happens, the current logic will decide to use
phase 11. Since phase 11 is sometimes found to be invalid, this is a
bad choice. Sure enough, when phase 11 is picked we often get mmc
errors later in boot.
I have seen cases where all phases were found to be valid 3 times in a
row, so increase the retry count to 10 just to be extra sure.
Fixes: 415b5a75da43 ("mmc: sdhci-msm: Add platform_execute_tuning implementation")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200827075809.1.If179abf5ecb67c963494db79c3bc4247d987419b@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The commit 61d7437ed1390 ("mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040")
broke resume for eMMC HS400. When the system suspends the eMMC controller
is powered down. So, on resume we need to reinitialize the controller.
Although, amd_sdhci_host was not getting cleared, so the DLL was never
re-enabled on resume. This results in HS400 being non-functional.
To fix the problem, this change clears the tuned_clock flag, clears the
dll_enabled flag and disables the DLL on reset.
Fixes: 61d7437ed1390 ("mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040")
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200831150517.1.I93c78bfc6575771bb653c9d3fca5eb018a08417d@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
RHBZ: 1871246
If during cifs_lookup()/get_inode_info() we encounter a DFS link
and we use the cifsacl or modefromsid mount options we must suppress
any -EREMOTE errors that triggers or else we will not be able to follow
the DFS link and automount the target.
This fixes an issue with modefromsid/cifsacl where these mountoptions
would break DFS and we would no longer be able to access the share.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
|
|
When removing a port from a VLAN we are just erasing the
member config for the VLAN, which is wrong: other ports
can be using it.
Just mask off the port and only zero out the rest of the
member config once ports using of the VLAN are removed
from it.
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
