| Age | Commit message (Collapse) | Author |
|---|
|
Pull drm fixes from Dave Airlie:
"Regular weekly fixes pull, the usual leaders in amdgpu/xe, a couple of
i915, and some scattered misc fixes.
panic:
- two clippy fixes
dp_mst
- locking fix
atomic:
- fix redundant DPMS calls
i915:
- Do cdclk post plane programming later
- Bump MMAP_GTT_VERSION: missing indication of partial mmaps support
xe:
- Release guc ids before cancelling work
- Fix new warnings around userptr
- Temporaritly disable D3Cold on BMG
- Retry and wait longer for GuC PC to start
- Remove redundant check in xe_vm_create_ioctl
amdgpu:
- GC 12.x DCC fix
- DC DCE 6.x fix
- Hibernation fix
- HPD fix
- Backlight fixes
- Color depth fix
- UAF fix in hdcp_work
- VCE 2.x fix
- GC 12.x PTE fix
amdkfd:
- Queue eviction fix
gma500:
- fix NULL pointer check"
* tag 'drm-fixes-2025-03-14' of https://gitlab.freedesktop.org/drm/kernel: (23 commits)
drm/amdgpu: NULL-check BO's backing store when determining GFX12 PTE flags
drm/amd/amdkfd: Evict all queues even HWS remove queue failed
drm/i915: Increase I915_PARAM_MMAP_GTT_VERSION version to indicate support for partial mmaps
drm/dp_mst: Fix locking when skipping CSN before topology probing
drm/amdgpu/vce2: fix ip block reference
drm/amd/display: Fix slab-use-after-free on hdcp_work
drm/amd/display: Assign normalized_pix_clk when color depth = 14
drm/amd/display: Restore correct backlight brightness after a GPU reset
drm/amd/display: fix default brightness
drm/amd/display: Disable unneeded hpd interrupts during dm_init
drm/amd: Keep display off while going into S4
drm/amd/display: fix missing .is_two_pixels_per_container
drm/amdgpu/display: Allow DCC for video formats on GFX12
drm/xe: remove redundant check in xe_vm_create_ioctl()
drm/atomic: Filter out redundant DPMS calls
drm/xe/guc_pc: Retry and wait longer for GuC PC start
drm/xe/pm: Temporarily disable D3Cold on BMG
drm/i915/cdclk: Do cdclk post plane programming later
drm/xe/userptr: Fix an incorrect assert
drm/xe: Release guc ids before cancelling work
...
|
|
Commit 7fdaf8966aae ("can: ucan: use strscpy() to instead of strncpy()")
unintentionally introduced a one byte out of bound read on strscpy()'s
source argument (which is kind of ironic knowing that strscpy() is meant
to be a more secure alternative :)).
Let's consider below buffers:
dest[len + 1]; /* will be NUL terminated */
src[len]; /* may not be NUL terminated */
When doing:
strncpy(dest, src, len);
dest[len] = '\0';
strncpy() will read up to len bytes from src.
On the other hand:
strscpy(dest, src, len + 1);
will read up to len + 1 bytes from src, that is to say, an out of bound
read of one byte will occur on src if it is not NUL terminated. Note
that the src[len] byte is never copied, but strscpy() still needs to
read it to check whether a truncation occurred or not.
This exact pattern happened in ucan.
The root cause is that the source is not NUL terminated. Instead of
doing a copy in a local buffer, directly NUL terminate it as soon as
usb_control_msg() returns. With this, the local firmware_str[] variable
can be removed.
On top of this do a couple refactors:
- ucan_ctl_payload->raw is only used for the firmware string, so
rename it to ucan_ctl_payload->fw_str and change its type from u8 to
char.
- ucan_device_request_in() is only used to retrieve the firmware
string, so rename it to ucan_get_fw_str() and refactor it to make it
directly handle all the string termination logic.
Reported-by: syzbot+d7d8c418e8317899e88c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-can/67b323a4.050a0220.173698.002b.GAE@google.com/
Fixes: 7fdaf8966aae ("can: ucan: use strscpy() to instead of strncpy()")
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250218143515.627682-2-mailhol.vincent@wanadoo.fr
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
run_state_machine()
A subtle error got introduced while manually fixing merge conflict in
tcpm.c for commit 85c4efbe6088 ("Merge v6.12-rc6 into usb-next"). As a
result of this error, the next state is unconditionally set to
SNK_WAIT_CAPABILITIES_TIMEOUT while handling SNK_WAIT_CAPABILITIES state
in run_state_machine(...).
Fix this by setting new state of TCPM state machine to `upcoming_state`
(that is set to different values based on conditions).
Cc: stable@vger.kernel.org
Fixes: 85c4efbe60888 ("Merge v6.12-rc6 into usb-next")
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250310-fix-snk-wait-timeout-v6-14-rc6-v1-1-5db14475798f@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Count the pages used by pKVM for the guest stage-2 in memory stats under
secondary pagetable, similarly to what the VHE mode does.
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250313114038.1502357-4-vdonnefort@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
In order to account for memory dedicated to the stage-2 page-tables, use
a separated memcache when tearing down the VM. Meanwhile rename
reclaim_guest_pages to reflect the fact it only reclaim page-table
pages.
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250313114038.1502357-3-vdonnefort@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add flags to kvm_hyp_memcache and propagate the latter to the allocation
and free callbacks. This will later allow to account for memory, based
on the memcache configuration.
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250313114038.1502357-2-vdonnefort@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.14-rc7
Here are some new modem device ids and a couple of related fixes, and
support for Altera USB Blaster 3.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.14-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: ftdi_sio: add support for Altera USB Blaster 3
USB: serial: option: fix Telit Cinterion FE990A name
USB: serial: option: add Telit Cinterion FE990B compositions
USB: serial: option: match on interface class for Telit FN990B
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Release guc ids before cancelling work (Tejas)
- Fix new warnings around userptr (Thomas)
- Temporaritly disable D3Cold on BMG (Rodrigo)
- Retry and wait longer for GuC PC to start (Rodrigo)
- Remove redundant check in xe_vm_create_ioctl (Xin)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z9MJWeIlZPuvXZ_G@intel.com
|
|
Merge series from Maud Spierings <maudspierings@gocontroll.com>:
Add inital support for 2 variants of the Moduline Display controller
module slot. This system is powered by the Ka-Ro Electronics tx8p-ml81
COM, which features an imx8mp SoC.
|
|
Merge series from Ryan Walklin <ryan@testtoast.com>:
Hi All,
V3 of this patch adding headphone jack detection support to the Anbernic RGnnXX series of handhelds. V3 corrects my misunderstanding of derivation of ALSA UCM file paths, and adds recieved Reviewed-by and Tested-by tags. Thanks to those that have reviewed and fed back on previous versions.
Original message below:
This series adds the required device tree bindings to describe GPIOs for jack detection in the sun4i-codec driver, adds support for jack detection to the codec machine driver, and describes the hardware configuration in the RG35XX DTS. The existing speaker amplifier GPIO pin can then be used in concert with jack detection to enable userspace sound servers (via an ALSA UCM configuration) to disable the speaker route when headphones are connected.
Thanks to Chris Morgan for his assistance putting this series together.
Regards,
Ryan
Chris Morgan (2):
ASoC: dt-bindings: sun4i-a10-codec: add hp-det-gpios
arm64: dts: allwinner: h700: Add hp-det-gpios for Anbernic RG35XX
Ryan Walklin (3):
ASoC: sun4i-codec: correct dapm widgets and controls for h616
ASoC: sun4i-codec: support hp-det-gpios property
ASoC: sun4i-codec: add h616 card long_name
.../sound/allwinner,sun4i-a10-codec.yaml | 6 ++
.../sun50i-h700-anbernic-rg35xx-2024.dts | 5 +-
sound/soc/sunxi/sun4i-codec.c | 57 ++++++++++++++++++-
3 files changed, 66 insertions(+), 2 deletions(-)
--
2.48.1
|
|
Merge the for-6.14 to resolve conflicts with simple-card-utils.c due to
parallel delveopment.
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Do cdclk post plane programming later (Ville)
- Bump MMAP_GTT_VERSION: missing indication of partial mmaps support (Jose)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z9MG4fH-6Q8dTHE1@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few clk driver fixes for Samsung and Qualcomm clk drivers:
- Suspend on Google GS101 crashes when trying to save some clk
registers that we shouldn't be saving so we don't do that anymore
- The PLL lock time was wrong on the Tesla FSD which could lead to
the PLL never locking
- Qualcomm's display clk controller on SM8750 was trying to change
the frequency of a parent clk for the DSI device when it should
have stopped and adjusted the divider. The failure is that the clk
frequency was half what was expected, leading to broken display"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: update PLL locktime for PLL142XX used on FSD platform
clk: samsung: gs101: fix synchronous external abort in samsung_clk_save()
clk: qcom: dispcc-sm8750: Drop incorrect CLK_SET_RATE_PARENT on byte intf parent
|
|
Pull bcachefs fixes from Kent Overstreet:
"Roxana caught an unitialized value that might explain some of the
rebalance weirdness we're still tracking down - cool.
Otherwise pretty minor"
* tag 'bcachefs-2025-03-13' of git://evilpiepirate.org/bcachefs:
bcachefs: bch2_get_random_u64_below()
bcachefs: target_congested -> get_random_u32_below()
bcachefs: fix tiny leak in bch2_dev_add()
bcachefs: Make sure trans is unlocked when submitting read IO
bcachefs: Initialize from_inode members for bch_io_opts
bcachefs: Fix b->written overflow
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A null pointer check for gma500, two clippy fixes for panic, a fix for
an interaction between DPMS and atomic leading to dropped frames, and
a locking fix for dp_mst
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-holistic-clay-moose-fead28@houat
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.14-2025-03-12:
amdgpu:
- GC 12.x DCC fix
- DC DCE 6.x fix
- Hibernation fix
- HPD fix
- Backlight fixes
- Color depth fix
- UAF fix in hdcp_work
- VCE 2.x fix
- GC 12.x PTE fix
amdkfd:
- Queue eviction fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250312190931.216506-1-alexander.deucher@amd.com
|
|
MT7988 has 2 different spi controllers. Add their compatibles.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241109105029.52748-1-linux@fw-web.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adding jack detection requires sound servers to act on the emitted
events, which are described by ALSA Use Case Manager configurations in
userspace. These configurations include the long card name in the file
path (falling back to card->name if this is not present), so add a long
card name for the H616 without spaces, making UCM referencing easier.
The corresponding ALSA UCM patch is here (now merged):
https://github.com/alsa-project/alsa-ucm-conf/pull/491
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
--
Changelog v1..v2:
- Separate patch for card->long_name
- Note UCM patch link
Changelog v2..v3:
- Add card->long_name rather than change existing card->name
Link: https://patch.msgid.link/20250214220247.10810-6-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for GPIO headphone detection with the hp-det-gpios
property. In order for this to properly disable the path upon
removal of headphones, the output must be labelled Headphone which
is a common sink in the driver.
Describe a headphone jack and detection GPIO in the driver, check for
a corresponding device tree node, and enable jack detection in a new
machine init function if described.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
--
Changelog v1..v2:
- Separate DAPM changes into separate patch and add rationale.
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20250214220247.10810-4-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The previous H616 support patch added a single LINEOUT DAPM pin switch
to the card controls. As the codec in this SoC only has a single route,
this seemed reasonable at the time, however is redundant given the
existing DAPM codec widget definitions controlling the digital and
analog sides of the codec.
It is also insufficient to describe the scenario where separate
components (muxes, jack detection etc) are used to modify the audio
route external to the SoC. For example the Anbernic RG(##)XX series of
devices uses a headphone jack detection switch, GPIO-controlled speaker
amplifier and a passive external mux chip to route audio.
Remove the redundant LINEOUT card control, and add a Speaker pin switch
control and Headphone DAPM widget to allow control of the above
hardware.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20250214220247.10810-3-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Devices integrating Allwinner SoCs may use line-out or headphone jacks
with jack detection circuits attached to a GPIO. Support defining these
in DTs.
A number of Anbernic devices featuring the H700 SoC use this mechanism
to switch between a headphone jack and an internal speaker, so add these
to the allowed routing items.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
--
Changelog v1..v2:
- Remove vendor prefix from hp-det-gpios
Changelog v2..v3:
- Add Reviewed-by tag
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20250214220247.10810-2-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The main point of the Moduline series of embedded controllers is its
ecosystem of IO modules, these are currently operated through the spidev
interface. Ideally there will be a full dedicated driver in the future.
Add the gocontroll moduline-module-slot device to enable the required
spidev interface.
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://patch.msgid.link/20250226-initial_display-v2-12-23fafa130817@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a maintainer for the GOcontroll Moduline module slot bindings and
future driver.
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://patch.msgid.link/20250226-initial_display-v2-6-23fafa130817@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the bindings that describe a GOcontroll Moduline module slot. This
slot provides all the interfaces to interface with a Moduline compatible
IO module. The actual module is not reasonable to describe as it can be
swapped at will, with this connector the driver will be able to probe
for a module on boot.
The connector consists of 2 parts, one part for interfacing with the SoC
and main board, the other part has 13 IO channels for the module to
interact with the outside world. The functions of these IO channels are
determined by the type of module in the slot. The IO on the SoC side is
as follows:
- a 3v3 supply, this tends to be the logic level of the module and its
microcontroller
- a 5v0 supply, this can be used to power low power peripherals on the
module
- a 6v-8v supply, this can be used for high power peripherals on the
module
- a 6v-30v supply, this tends to be a dirty supply that comes from the
controller supply after some circuit protection, or is the same as
the 6v-8v supply.
- an SPI bus which carries the communication between the SoC and the
microcontroller on the module.
- an I2C bus shared between the SoC and all module slots which can
carry direct module-to-module communication.
- a reset line
- an interrupt line that indicates a clear to transmit signal
- a sync line shared between the SoC and all module slots which could
be used to synchronize modules for time sensitive IO spread across
modules.
- a SMBus alert line that is shared between the modules but is not
connected to the SoC so that is ignored.
A slot-number property is used to identify the physical location of a
module slot. Without it, it would be impossible to identify which module
to control if there are multiple of one type, to address the desired IO.
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://patch.msgid.link/20250226-initial_display-v2-3-23fafa130817@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
GOcontroll produces embedded linux systems and IO modules to use in
these systems, add its prefix.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://patch.msgid.link/20250226-initial_display-v2-2-23fafa130817@gocontroll.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The former code sets the V slot from inside set_bitwidth according to
the bitwidth of the PCM format. That's wrong, since:
* It overrides the V slot parsed from DT binding.
* The V slot is set shifted behind the I slot by the length of the PCM
bitwidth, but the PCM bitwidth has no assured relation to the TDM
slot width.
Replace the former logic by setting up the I/V sense transmission only
in case of both I/V slots being specified in devicetree, and never
override those values. In case the slots are left unspecified, disable
the transmission completely.
There's an improbable case someone is relying on the old behavior, but
if so, that's a setup that only works by accident, and cannot be sanely
supported going forward. There's no indication anyone is consuming the
I/V sense data up to today, so break the former behavior.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-6-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new explicit function for the setting of I/V sense TDM slots.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-5-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add control to expose the option of autoretry behavior on overcurrent
events in the codec.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-4-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SN012776 is a speaker amp chip found in Apple's 2021 laptops. It appears
similar and more-or-less compatible to TAS2764. Extend the TAS2764
driver with some SN012776 specifics and configure the chip assuming
it's in one of the Apple machines.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-3-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A variant of TAS2770 known as TAS5770L is found in Apple Silicon Macs.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-2-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The TI SN012776 is a variant of TAS2764 found in Apple Silicon Macs.
It continues Apple's long-standing policy of getting vendors to
spin out subtly incompatible and Apple-exclusive variants of their
publicly available parts.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-1-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit 419d1918105e ("ASoC: simple-card-utils: use __free(device_node) for
device node") uses __free(device_node) for dlc->of_node, but we need to
keep it while driver is in use.
Don't use __free(device_node) in graph_util_parse_dai().
Fixes: 419d1918105e ("ASoC: simple-card-utils: use __free(device_node) for device node")
Reported-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn>
Reported-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn>
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://patch.msgid.link/87eczisyhh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Architecturally we have two filters for each regular event counter,
so add generic support for the second one too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/b11be3f23a72bc27088b115099c8fe865b70babc.1741190362.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The notion of a single u32 filter value for any event doesn't scale well
when the potential architectural scope is already two 64-bit values, and
implementations may add custom stuff on the side too. Rather than try to
thread arbitrary filter data through the common path, let's just make
the set_ev_filter op self-contained in terms of parsing and configuring
any and all filtering for the given event - splitting out a distinct op
for cycles events which inherently differ - and let implementations
override the whole thing if they want to do something different. This
already allows the Ampere code to stop looking a bit hacky.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/c0cd4d4c12566dbf1b062ccd60241b3e0639f4cc.1741190362.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Implementations may occasionally want to refer to register offsets, so
for the sake of consistency move all of the register definitions to join
the PMIIDR fields in the private header where they can be shared. As an
example nicety, we can then define Ampere's imp-def filters in terms of
the architectural PMIMPDEF range rather than open-coded offsets.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/5a3c796560665b51cb63fec0d473afd8f8d0a836.1741190362.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/oupton/linux into for-next/perf
Pull Apple-M1 PMU driver changes from Oliver Upton, which form a prefix
of the series in the KVM/Arm tree that allows the PMU to be virtualised.
Sort of, anyway.
* 'perf/m1-guest-events' of git://git.kernel.org/pub/scm/linux/kernel/git/oupton/linux:
drivers/perf: apple_m1: Support host/guest event filtering
drivers/perf: apple_m1: Refactor event select/filter configuration
|
|
Not all devices have an ACPI companion fwnode, so adev might be NULL.
This is similar to the commit cd2fd6eab480
("platform/x86: int3472: Check for adev == NULL").
Add a check for adev not being set and return -ENODEV in that case to
avoid a possible NULL pointer deref in int3402_thermal_probe().
Note, under the same directory, int3400_thermal_probe() has such a
check.
Fixes: 77e337c6e23e ("Thermal: introduce INT3402 thermal driver")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250313043611.1212116-1-chenyuan0y@gmail.com
[ rjw: Subject edit, added Fixes: ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Due to a typo during defining HCI errors it is not possible to connect
LE-capable device with BR/EDR only adapter. The connection is terminated
by the LE adapter because the invalid LL params error code is treated
as unsupported remote feature.
Fixes: 79c0868ad65a ("Bluetooth: hci_event: Use HCI error defines instead of magic values")
Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The chan_alloc_skb_cb() function is supposed to return error pointers on
error. Returning NULL will lead to a NULL dereference.
Fixes: 6b8d4a6a0314 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Similar to commit e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to
NULL after job completion"), ensure the job pointer is set to `NULL` when
a job's fence has an error. Failing to do so can trigger kernel warnings
in specific scenarios, such as:
1. v3d_csd_job_run() assigns `v3d->csd_job = job`
2. CSD job exceeds hang limit, causing a timeout → v3d_gpu_reset_for_timeout()
3. GPU reset
4. drm_sched_resubmit_jobs() sets the job's fence to `-ECANCELED`.
5. v3d_csd_job_run() detects the fence error and returns NULL, not
submitting the job to the GPU
6. User-space runs `modprobe -r v3d`
7. v3d_gem_destroy()
v3d_gem_destroy() triggers a warning indicating that the CSD job never
ended, as we didn't set `v3d->csd_job` to NULL after the timeout. The same
can also happen to BIN, RENDER, and TFU jobs.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-v3d-gpu-reset-fixes-v4-2-c1e780d8e096@igalia.com
|
|
The V3D driver still relies on `drm_sched_increase_karma()` and
`drm_sched_resubmit_jobs()` for resubmissions when a timeout occurs.
The function `drm_sched_increase_karma()` marks the job as guilty, while
`drm_sched_resubmit_jobs()` sets an error (-ECANCELED) in the DMA fence of
that guilty job.
Because of this, we must check whether the job’s DMA fence has been
flagged with an error before executing the job. Otherwise, the same guilty
job may be resubmitted indefinitely, causing repeated GPU resets.
This patch adds a check for an error on the job's fence to prevent running
a guilty job that was previously flagged when the GPU timed out.
Note that the CPU and CACHE_CLEAN queues do not require this check, as
their jobs are executed synchronously once the DRM scheduler starts them.
Cc: stable@vger.kernel.org
Fixes: d223f98f0209 ("drm/v3d: Add support for compute shader dispatch.")
Fixes: 1584f16ca96e ("drm/v3d: Add support for submitting jobs to the TFU.")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-v3d-gpu-reset-fixes-v4-1-c1e780d8e096@igalia.com
|
|
The page table population code in map_range() uses a recursive algorithm
to create the early mappings of the kernel, the DTB and the ID mapped
text and data pages, and this fails to take into account that the way
these page tables may be constructed is not precisely the same at each
level. In particular, block mappings are not permitted at each level,
and the code as it exists today might inadvertently create such a
forbidden block mapping if it were used to map a region of the
appropriate size and alignment.
This never happens in practice, given the limited size of the assets
being mapped by the early boot code. Nonetheless, it would be better if
this code would behave correctly in all circumstances.
So only permit block mappings at level 2, and page mappings at level 3,
for any page size, and use table mappings exclusively at all other
levels. This change should have no impact in practice, but it makes the
code more robust.
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250311073043.96795-2-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Under VMware hypervisors, SEV-SNP enabled VMs are fundamentally able to boot
without UEFI, but this regressed a year ago due to:
0f4a1e80989a ("x86/sev: Skip ROM range scans and validation for SEV-SNP guests")
In this case, mpparse_find_mptable() has to be called to parse MP
tables which contains the necessary boot information.
[ mingo: Updated the changelog. ]
Fixes: 0f4a1e80989a ("x86/sev: Skip ROM range scans and validation for SEV-SNP guests")
Co-developed-by: Ye Li <ye.li@broadcom.com>
Signed-off-by: Ye Li <ye.li@broadcom.com>
Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ye Li <ye.li@broadcom.com>
Reviewed-by: Kevin Loughlin <kevinloughlin@google.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250313173111.10918-1-ajay.kaher@broadcom.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, bluetooth and wireless.
No known regressions outstanding.
Current release - regressions:
- wifi: nl80211: fix assoc link handling
- eth: lan78xx: sanitize return values of register read/write
functions
Current release - new code bugs:
- ethtool: tsinfo: fix dump command
- bluetooth: btusb: configure altsetting for HCI_USER_CHANNEL
- eth: mlx5: DR, use the right action structs for STEv3
Previous releases - regressions:
- netfilter: nf_tables: make destruction work queue pernet
- gre: fix IPv6 link-local address generation.
- wifi: iwlwifi: fix TSO preparation
- bluetooth: revert "bluetooth: hci_core: fix sleeping function
called from invalid context"
- ovs: revert "openvswitch: switch to per-action label counting in
conntrack"
- eth:
- ice: fix switchdev slow-path in LAG
- bonding: fix incorrect MAC address setting to receive NS
messages
Previous releases - always broken:
- core: prevent TX of unreadable skbs
- sched: prevent creation of classes with TC_H_ROOT
- netfilter: nft_exthdr: fix offset with ipv4_find_option()
- wifi: cfg80211: cancel wiphy_work before freeing wiphy
- mctp: copy headers if cloned
- phy: nxp-c45-tja11xx: add errata for TJA112XA/B
- eth:
- bnxt: fix kernel panic in the bnxt_get_queue_stats{rx | tx}
- mlx5: bridge, fix the crash caused by LAG state check"
* tag 'net-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
net: mana: cleanup mana struct after debugfs_remove()
net/mlx5e: Prevent bridge link show failure for non-eswitch-allowed devices
net/mlx5: Bridge, fix the crash caused by LAG state check
net/mlx5: Lag, Check shared fdb before creating MultiPort E-Switch
net/mlx5: Fix incorrect IRQ pool usage when releasing IRQs
net/mlx5: HWS, Rightsize bwc matcher priority
net/mlx5: DR, use the right action structs for STEv3
Revert "openvswitch: switch to per-action label counting in conntrack"
net: openvswitch: remove misbehaving actions length check
selftests: Add IPv6 link-local address generation tests for GRE devices.
gre: Fix IPv6 link-local address generation.
netfilter: nft_exthdr: fix offset with ipv4_find_option()
selftests/tc-testing: Add a test case for DRR class with TC_H_ROOT
net_sched: Prevent creation of classes with TC_H_ROOT
ipvs: prevent integer overflow in do_ip_vs_get_ctl()
selftests: netfilter: skip br_netfilter queue tests if kernel is tainted
netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in insert_tree()
wifi: mac80211: fix MPDU length parsing for EHT 5/6 GHz
qlcnic: fix memory leak issues in qlcnic_sriov_common.c
rtase: Fix improper release of ring list entries in rtase_sw_reset
...
|
|
Now that all abuse is gone and the legit users are converted to
guard(msi_descs_lock), rename the lock functions and document them as
internal.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huwei.com>
Link: https://lore.kernel.org/all/20250313130322.027190131@linutronix.de
|
|
The driver abuses the MSI descriptors for internal purposes. Aside of core
code and MSI providers nothing has to care about their existence. They have
been encapsulated with a lot of effort because this kind of abuse caused
all sorts of issues including a maintainability nightmare.
Rewrite the code so it uses dedicated storage to hand the required
information to the interrupt handler.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250313130321.963504017@linutronix.de
|
|
The driver walks the MSI descriptors to test whether a descriptor exists
for a given index. That's just abuse of the MSI internals.
The same test can be done with a single function call by looking up whether
there is a Linux interrupt number assigned at the index.
What's worse is that the function is completely unserialized against
modifications of the MSI-X control by operations issued from the interrupt
core. It also brings the PCI/MSI-X internal cached control word out of
sync.
Remove the trainwreck and invoke the function provided by the PCI/MSI core
to update it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/all/20250313130321.898592817@linutronix.de
|
|
The PCI/TPH driver fiddles with the MSI-X control word of an active
interrupt completely unserialized against concurrent operations issued
from the interrupt core. It also brings the PCI/MSI-X internal cached
control word out of sync.
Provide a function, which has the required serialization and keeps the
control word cache in sync.
Unfortunately this requires to look up and lock the interrupt descriptor,
which should be only done in the interrupt core code. But confining this
particular oddity in the PCI/MSI core is the lesser of all evil. A
interrupt core implementation would require a larger pile of infrastructure
and indirections for dubious value.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/all/20250313130321.822790423@linutronix.de
|
|
Convert the code to use the new guard(msi_descs_lock).
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/all/20250313130321.758905320@linutronix.de
|
|
Convert the code to use the new guard(msi_descs_lock).
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/all/20250313130321.695027112@linutronix.de
|
