| Age | Commit message (Collapse) | Author |
|---|
|
This is based on real asic performance result.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
Programming outstanding updates is causing hangs on dcn35, so remove
for now.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Regamma resolution for the first few black levels can have problems for
calibration.
[HOW]
HW LUT is divided into N power-of-2 regions each with K segments. For
SDR mode we set min point at 2^-10 and increments of 2^-13. It's
generally more than 8-bit SDR needs, but some calibration tools and API
use 12-bit curves.
The fix shifts starting point to 2^-12 and starting increments at 2^-16.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Signed-off-by: Peterson <peterson.guo@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Missing a dc_dmub_srv_notify_fw_dc_power_state in driver init.
[How]
Notify DMCUB of D0 state in hardware_init.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When Source extend the vblank to reach the minimum panel
refresh rate, the vtotal length could have 1 line longer
than the maximum supported vtotal.
The reason is we optimized the vtotal/refresh-rate calculation
to get more accurate vtotal number by rounding the calculation
result. But when the target refresh rate is the minimum
refresh rate, the vtotal result could be round up and over
the maximum supported vtotal.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: po-tchen <robin.chen@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
For some EDP to MIPI panel, disabling OTG when link is alive like boot
case, the converter might output garbage or show no display because our
GPU is not sending required pixel data.
Alos Dig fifo underflow was found which might cause garbage, when
resetting otg for other types of EDP panels.
[How]
Skipping resetting OTG if the dig fifo is on. Make sure that the otg for
the pipe is the one that the dig fifo is selecting via the FE mask.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zhongwei <Zhongwei.Zhang@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Assign socclk_khz value from dcn4x.
Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Signed-off-by: Sridevi Arvindekar <sarvinde@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
TBT4 dock have bandwidth limitation, need dsc always on to support all
modes.
[how]
force dsc always on when detect TBT4 dock.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Fudongwang <Fudong.Wang@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The processor_thermal driver uses pcim_device_enable() to enable a PCI
device, which means the device will be automatically disabled on driver
detach. Thus there is no need to call pci_disable_device() again on it.
With recent PCI device resource management improvements, e.g. commit
f748a07a0b64 ("PCI: Remove legacy pcim_release()"), this problem is
exposed and triggers the warining below.
[ 224.010735] proc_thermal_pci 0000:00:04.0: disabling already-disabled device
[ 224.010747] WARNING: CPU: 8 PID: 4442 at drivers/pci/pci.c:2250 pci_disable_device+0xe5/0x100
...
[ 224.010844] Call Trace:
[ 224.010845] <TASK>
[ 224.010847] ? show_regs+0x6d/0x80
[ 224.010851] ? __warn+0x8c/0x140
[ 224.010854] ? pci_disable_device+0xe5/0x100
[ 224.010856] ? report_bug+0x1c9/0x1e0
[ 224.010859] ? handle_bug+0x46/0x80
[ 224.010862] ? exc_invalid_op+0x1d/0x80
[ 224.010863] ? asm_exc_invalid_op+0x1f/0x30
[ 224.010867] ? pci_disable_device+0xe5/0x100
[ 224.010869] ? pci_disable_device+0xe5/0x100
[ 224.010871] ? kfree+0x21a/0x2b0
[ 224.010873] pcim_disable_device+0x20/0x30
[ 224.010875] devm_action_release+0x16/0x20
[ 224.010878] release_nodes+0x47/0xc0
[ 224.010880] devres_release_all+0x9f/0xe0
[ 224.010883] device_unbind_cleanup+0x12/0x80
[ 224.010885] device_release_driver_internal+0x1ca/0x210
[ 224.010887] driver_detach+0x4e/0xa0
[ 224.010889] bus_remove_driver+0x6f/0xf0
[ 224.010890] driver_unregister+0x35/0x60
[ 224.010892] pci_unregister_driver+0x44/0x90
[ 224.010894] proc_thermal_pci_driver_exit+0x14/0x5f0 [processor_thermal_device_pci]
...
[ 224.010921] ---[ end trace 0000000000000000 ]---
Remove the excess pci_disable_device() calls.
Fixes: acd65d5d1cf4 ("thermal/drivers/int340x/processor_thermal: Add PCI MMIO based thermal driver")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20240930081801.28502-3-rui.zhang@intel.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The TPMI_RAPL_REG_DOMAIN_INFO value needs to be multiplied by 8 to get
the register offset.
Cc: All applicable <stable@vger.kernel.org>
Fixes: 903eb9fb85e3 ("powercap: intel_rapl_tpmi: Fix System Domain probing")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/20240930081801.28502-2-rui.zhang@intel.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This reverts commit b8d046985c2dc41a0e264a391da4606099f8d44f.
Reverting as regression discovered on certain systems and golden values
need to updated.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The MPO plane will receive a flip but
desktop plane may not receive a flip when GSL is enabled.
As a result, system will be stuck waiting for a flip that was never sent.
[How]
Set update address update flag of all flip_immediate planes
if there are multiple planes.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Resync FIFO is a workaround to write the same value to
DENTIST_DISPCLK_CNTL register after programming OTG_PIXEL_RATE_DIV
register, in case seemless boot, there is no OTG_PIXEL_RATE_DIV register
update, so skip CRTC disable when resync FIFO to avoid random FIFO error
and garbage.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fudongwang <Fudong.Wang@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
dcn32_blank_phantom() does not consider the subVP+ODM case when blanking.
Only one of the pipes will get blanked. Remaining pipes are not blanked.
Will cause underflow in the phantom pipe when enabling the CRTC.
[How]
Use blank_pixel_data() instead of blank_phantom().
remove dcn32_blank_phantom() since logic is identical.
Different DPG dimensions get programmed when blanking phantom pipes.
Previously had phantom pipes use DPG dimensions of the main stream.
Now use DPG dimensions of the phantom streams
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The patch is to solve null dereference in 'aux.dev', which is
introduced in recent radeon rework. By having 'late_register',
the connector should be registered after 'drm_dev_register'
automatically, where in before it is the opposite.
Fixes: 90985660ba48 ("drm/radeon: remove load callback from kms_driver")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3665
Tested-by: Hans de Goede <hdegoede@redhat.com>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Wu Hoi Pok <wuhoipok@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit applies isolation enforcement to the GFX and Compute rings
in the gfx_v11_0 module.
The commit sets `amdgpu_gfx_enforce_isolation_ring_begin_use` and
`amdgpu_gfx_enforce_isolation_ring_end_use` as the functions to be
called when a ring begins and ends its use, respectively.
`amdgpu_gfx_enforce_isolation_ring_begin_use` is called when a ring
begins its use. This function cancels any scheduled
`enforce_isolation_work` and, if necessary, signals the Kernel Fusion
Driver (KFD) to stop the runqueue.
`amdgpu_gfx_enforce_isolation_ring_end_use` is called when a ring ends
its use. This function schedules `enforce_isolation_work` to be run
after a delay.
These functions are part of the Enforce Isolation Handler, which
enforces shader isolation on AMD GPUs to prevent data leakage between
different processes.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the
gfx_v12_0 module. This packet is used to emit the cleaner shader, which
is used to clear GPU memory before it's reused, helping to prevent data
leakage between different processes.
Finally, the patch updates the ring function structures to include the
new gfx_v12_0_ring_emit_cleaner_shader function. This allows the
cleaner shader to be emitted as part of the ring's operations.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
get_wave_state is not defined for sdma queue, copy_context_work_handler
calls it for sdma queue will crash.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SMI event fifo size 1KB was enough to report GPU vm fault or reset
event, but could drop the more frequent SVM migration events. Increase
kfifo size to 8KB to store about 100 migrate events, less chance to drop
the migrate events if lots of migration happened in the short period of
time. Add KFD prefix to the macro name.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If page migration failed, also output migrate end event to match with
migrate start event, with failure error_code added to the end of the
migrate message macro. This will not break uAPI because application uses
old message macro sscanf drop and ignore the error_code.
Output GPU page fault restore end event if migration failed.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The patch modifies the gfx_v11_0_kiq_set_resources function to write
the cleaner shader's memory controller address to the ring buffer. It
also adds a new function, gfx_v11_0_ring_emit_cleaner_shader, which
emits the PACKET3_RUN_CLEANER_SHADER packet to the ring buffer.
This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the
gfx_v11_0 module. This packet is used to emit the cleaner shader, which
is used to clear GPU memory before it's reused, helping to prevent data
leakage between different processes.
Finally, the patch updates the ring function structures to include the
new gfx_v11_0_ring_emit_cleaner_shader function. This allows the
cleaner shader to be emitted as part of the ring's operations.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Don't wake up the GPU for reading pm values. Instead, take a runtime
powermanagement ref when trying to read it if and only if the GPU is
already awake.
This avoids spurious wake ups (eg: from applets).
We use pm_runtime_get_if_in_active because we care about "is the GPU awake?"
not about "is the GPU awake and something else prevents suspend?".
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
htmldoc generation depend upon the input arguments etc
to generate the document. After update of handle to
ip_block then update needs in comments too to fix the
warnings.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410021904.YyGjlpk9-lkp@intel.com
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The patch modifies the gfx_v10_0_kiq_set_resources function to write
the cleaner shader's memory controller address to the ring buffer. It
also adds a new function, gfx_v10_0_ring_emit_cleaner_shader, which
emits the PACKET3_RUN_CLEANER_SHADER packet to the ring buffer.
This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the
gfx_v10_0 module. This packet is used to emit the cleaner shader, which
is used to clear GPU memory before it's reused, helping to prevent data
leakage between different processes.
Finally, the patch updates the ring function structures to include the
new gfx_v10_0_ring_emit_cleaner_shader function. This allows the
cleaner shader to be emitted as part of the ring's operations.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Only creating a new reference for each process instead of each VM.
Fixes: 9a1c1339abf9 ("drm/amdkfd: Run restore_workers on freezable WQs")
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reading pm values from the GPU shouldn't prevent it to be suspended
by resetting the last active timestamp (eg: if an background app
monitors GPU sensors every second, it would prevent the autosuspend
sequence to trigger).
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix the html doc warning due to mix up of the
forward declaration of struct amdgpu_ip_block.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_fini.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_fini on suspend
and some followed clean up.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_init.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_init on resume.
v2: squash in isp fix
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of resume.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of suspend.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of wait_for_idle.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Using pm_runtime_resume_and_get over pm_runtime_get_sync is recommended.
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
pm_runtime_put_autosuspend must be called from all exit paths.
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Asus Vivobook Pro 15 OLED comes in 3 N6506M* models:
N6506MU: Intel Ultra 9 185H, 3K OLED, RTX4060
N6506MV: Intel Ultra 7 155H, 3K OLED, RTX4050
N6506MJ: Intel Ultra 7 155H, FHD OLED, RTX3050
Fold the 3 DMI quirks for these into a single quirk to reduce the number
of quirks.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241005212819.354681-5-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Asus has 2 ExpertBook B1402C models:
B1402CBA with 12th gen Intel CPUs
B1402CVA with 13th gen Intel CPUs
Fold the 2 DMI quirks for these into a single quirk to reduce the number
of quirks.
Likewise Asus has 3 ExpertBook B1502C models:
B1502CBA with 12th gen Intel CPUs
B1502CGA with 12th gen Intel N-series CPUs
B1502CVA with 13th gen Intel CPUs
Fold the 3 DMI quirks for these into a single quirk to reduce the number
of quirks.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241005212819.354681-4-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Like the various 14" Asus ExpertBook B2 B2402* models there are also
4 variants of the 15" Asus ExpertBook B2 B2502* models:
B2502CBA: 12th gen Intel CPU, non flip
B2502FBA: 12th gen Intel CPU, flip
B2502CVA: 13th gen Intel CPU, non flip
B2502FVA: 13th gen Intel CPU, flip
Currently there already are DMI quirks for the B2502CBA, B2502FBA and
B2502CVA models. Asus website shows that there also is a B2502FVA.
Rather then adding a 4th quirk fold the 3 existing quirks into a single
quirk covering B2502* to also cover the last model while at the same time
reducing the number of quirks.
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241005212819.354681-3-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Asus ExpertBook B2402CBA / B2402FBA are the non flip / flip versions
of the 14" Asus ExpertBook B2 with 12th gen Intel processors.
It has been reported that the B2402FVA which is the 14" Asus ExpertBook
B2 flip with 13th gen Intel processors needs to skip the IRQ override too.
And looking at Asus website there also is a B2402CVA which is the non flip
model with 13th gen Intel processors.
Summarizing the following 4 models of the Asus ExpertBook B2 are known:
B2402CBA: 12th gen Intel CPU, non flip
B2402FBA: 12th gen Intel CPU, flip
B2402CVA: 13th gen Intel CPU, non flip
B2402FVA: 13th gen Intel CPU, flip
Fold the 2 existing quirks for the B2402CBA and B2402FBA into a single
quirk covering B2402* to also cover the 2 other models while at the same
time reducing the number of quirks.
Reported-by: Stefan Blum <stefan.blum@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/a983e6d5-c7ab-4758-be9b-7dcfc1b44ed3@gmail.com/
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241005212819.354681-2-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Just a grammar fix in lib/Kconfig.debug, under the config option
RUST_BUILD_ASSERT_ALLOW.
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Closes: https://github.com/Rust-for-Linux/linux/issues/1006
Fixes: ecaa6ddff2fd ("rust: add `build_error` crate")
Signed-off-by: Timo Grautstueck <timo.grautstueck@web.de>
Link: https://lore.kernel.org/r/20241006140244.5509-1-timo.grautstueck@web.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
While switching the driver mode between active and passive, Collaborative
Processor Performance Control (CPPC) is disabled in
amd_pstate_unregister_driver(). But, it is not enabled back while registering
the new driver (passive or active). This leads to the new driver mode not
working correctly, so enable it back in amd_pstate_register_driver().
Fixes: 3ca7bc818d8c ("cpufreq: amd-pstate: Add guided mode control support via sysfs")
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241004122303.94283-1-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Since commit 3f8ca2e115e5 ("vhost/scsi: Extract common handling code
from control queue handler") a null pointer dereference bug can be
triggered when guest sends an SCSI AN request.
In vhost_scsi_ctl_handle_vq(), `vc.target` is assigned with
`&v_req.tmf.lun[1]` within a switch-case block and is then passed to
vhost_scsi_get_req() which extracts `vc->req` and `tpg`. However, for
a `VIRTIO_SCSI_T_AN_*` request, tpg is not required, so `vc.target` is
set to NULL in this branch. Later, in vhost_scsi_get_req(),
`vc->target` is dereferenced without being checked, leading to a null
pointer dereference bug. This bug can be triggered from guest.
When this bug occurs, the vhost_worker process is killed while holding
`vq->mutex` and the corresponding tpg will remain occupied
indefinitely.
Below is the KASAN report:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 PID: 840 Comm: poc Not tainted 6.10.0+ #1
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS
1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:vhost_scsi_get_req+0x165/0x3a0
Code: 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 02 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 65 30 4c 89 e2 48 c1 ea 03 <0f> b6
04 02 4c 89 e2 83 e2 07 38 d0 7f 08 84 c0 0f 85 be 01 00 00
RSP: 0018:ffff888017affb50 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff88801b000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888017affcb8
RBP: ffff888017affb80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff888017affc88 R14: ffff888017affd1c R15: ffff888017993000
FS: 000055556e076500(0000) GS:ffff88806b100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200027c0 CR3: 0000000010ed0004 CR4: 0000000000370ef0
Call Trace:
<TASK>
? show_regs+0x86/0xa0
? die_addr+0x4b/0xd0
? exc_general_protection+0x163/0x260
? asm_exc_general_protection+0x27/0x30
? vhost_scsi_get_req+0x165/0x3a0
vhost_scsi_ctl_handle_vq+0x2a4/0xca0
? __pfx_vhost_scsi_ctl_handle_vq+0x10/0x10
? __switch_to+0x721/0xeb0
? __schedule+0xda5/0x5710
? __kasan_check_write+0x14/0x30
? _raw_spin_lock+0x82/0xf0
vhost_scsi_ctl_handle_kick+0x52/0x90
vhost_run_work_list+0x134/0x1b0
vhost_task_fn+0x121/0x350
...
</TASK>
---[ end trace 0000000000000000 ]---
Let's add a check in vhost_scsi_get_req.
Fixes: 3f8ca2e115e5 ("vhost/scsi: Extract common handling code from control queue handler")
Signed-off-by: Haoran Zhang <wh1sper@zju.edu.cn>
[whitespace fixes]
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <b26d7ddd-b098-4361-88f8-17ca7f90adf7@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtio_transport_send_pkt in now called on transport fast path,
under RCU read lock. In that case, we have a bug: virtio_add_sgs
is called with GFP_KERNEL, and might sleep.
Pass the gfp flags as an argument, and use GFP_ATOMIC on
the fast path.
Link: https://lore.kernel.org/all/hfcr2aget2zojmqpr4uhlzvnep4vgskblx5b6xf2ddosbsrke7@nt34bxgp7j2x
Fixes: efcd71af38be ("vsock/virtio: avoid queuing packets when intermediate queue is empty")
Reported-by: Christian Brauner <brauner@kernel.org>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Cc: Luigi Leonardi <luigi.leonardi@outlook.com>
Message-ID: <3fbfb6e871f625f89eb578c7228e127437b1975a.1727876449.git.mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
This driver requires REGMAP_I2C to be selected in order to get access to
regmap_config, regmap_bus, and devm_regmap_init_i2c.
Add the missing dependency.
Fixes: 021730acbca6 ("hwmon: (max1668) Convert to use regmap")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Message-ID: <20241002-hwmon-select-regmap-v1-4-548d03268934@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This driver requires REGMAP_I2C to be selected in order to get access to
regmap_config and devm_regmap_init_i2c. Add the missing dependency.
Fixes: 2b9ea4262ae9 ("hwmon: Add driver for ltc2991")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Message-ID: <20241002-hwmon-select-regmap-v1-3-548d03268934@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This driver requires REGMAP_I2C to be selected in order to get access to
regmap_config and devm_regmap_init_i2c. Add the missing dependency.
Fixes: ef67959c4253 ("hwmon: (adt7470) Convert to use regmap")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Message-ID: <20241002-hwmon-select-regmap-v1-2-548d03268934@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This driver requires REGMAP_I2C to be selected in order to get access to
regmap_config and devm_regmap_init_i2c. Add the missing dependency.
Fixes: df885d912f67 ("hwmon: (adm9240) Convert to regmap")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Message-ID: <20241002-hwmon-select-regmap-v1-1-548d03268934@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This driver requires REGMAP_I2C to be selected in order to get access to
regmap_config and devm_regmap_init_i2c. Add the missing dependency.
Fixes: 07830d9ab34c ("hwmon: add initial NXP MC34VR500 PMIC monitoring support")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Message-ID: <20241002-mc34vr500-select-regmap_i2c-v1-1-a01875d0a2e5@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
0-day reports:
drivers/hwmon/tmp513.c:162:21: error:
variable 'tmp51x_regmap_config' has initializer but incomplete type
162 | static const struct regmap_config tmp51x_regmap_config = {
| ^
struct regmap_config is only available if REGMAP is enabled.
Add the missing Kconfig dependency to fix the problem.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410020246.2cTDDx0X-lkp@intel.com/
Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Cc: Eric Tremblay <etremblay@distech-controls.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The device_for_each_child_node() loop requires calls to
fwnode_handle_put() upon early returns to decrement the refcount of
the child node and avoid leaking memory.
There are multiple early returns within that loop in
adt7475_fan_pwm_config(), but fwnode_handle_put() is never called.
Instead of adding the missing calls, the scoped version of the loop can
be used to simplify the code and avoid mistakes in the future if new
early returns are added.
This issue was recently introduced and it does not affect old kernels
that do not support the scoped variant.
Fixes: 777c97ff08d0 ("hwmon: (adt7475) Add support for configuring initial PWM state")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Message-ID: <20240926-hwmon_adt7475_memleak-v1-1-89b8ee07507a@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
