Age | Commit message (Collapse) | Author |
|
The widgets array in the snd_soc_dapm_widget_list has a __counted_by
attribute attached to it, which points to the num_widgets variable. This
attribute is used in bounds checking, and if it is not set before the
array is filled, then the bounds sanitizer will issue a warning or a
kernel panic if CONFIG_UBSAN_TRAP is set.
This patch sets the size of the widgets list calculated with
list_for_each as the initial value for num_widgets as it is used for
allocating memory for the array. It is updated with the actual number of
added elements after the array is filled.
Signed-off-by: Aleksei Vetrov <vvvvvv@google.com>
Fixes: 80e698e2df5b ("ASoC: soc-dapm: Annotate struct snd_soc_dapm_widget_list with __counted_by")
Link: https://patch.msgid.link/20241028-soc-dapm-bounds-checker-fix-v1-1-262b0394e89e@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds support for another Lenovo Mini dock 0x17EF:0x3098 to the
r8152 driver. The device has been tested on NixOS, hotplugging and sleep
included.
Signed-off-by: Benjamin Große <ste3ls@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241020174128.160898-1-ste3ls@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KASAN reports the following UAF. The metadata_dst, which is used to
store the SCI value for macsec offload, is already freed by
metadata_dst_free() in macsec_free_netdev(), while driver still use it
for sending the packet.
To fix this issue, dst_release() is used instead to release
metadata_dst. So it is not freed instantly in macsec_free_netdev() if
still referenced by skb.
BUG: KASAN: slab-use-after-free in mlx5e_xmit+0x1e8f/0x4190 [mlx5_core]
Read of size 2 at addr ffff88813e42e038 by task kworker/7:2/714
[...]
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
dump_stack_lvl+0x51/0x60
print_report+0xc1/0x600
kasan_report+0xab/0xe0
mlx5e_xmit+0x1e8f/0x4190 [mlx5_core]
dev_hard_start_xmit+0x120/0x530
sch_direct_xmit+0x149/0x11e0
__qdisc_run+0x3ad/0x1730
__dev_queue_xmit+0x1196/0x2ed0
vlan_dev_hard_start_xmit+0x32e/0x510 [8021q]
dev_hard_start_xmit+0x120/0x530
__dev_queue_xmit+0x14a7/0x2ed0
macsec_start_xmit+0x13e9/0x2340
dev_hard_start_xmit+0x120/0x530
__dev_queue_xmit+0x14a7/0x2ed0
ip6_finish_output2+0x923/0x1a70
ip6_finish_output+0x2d7/0x970
ip6_output+0x1ce/0x3a0
NF_HOOK.constprop.0+0x15f/0x190
mld_sendpack+0x59a/0xbd0
mld_ifc_work+0x48a/0xa80
process_one_work+0x5aa/0xe50
worker_thread+0x79c/0x1290
kthread+0x28f/0x350
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x11/0x20
</TASK>
Allocated by task 3922:
kasan_save_stack+0x20/0x40
kasan_save_track+0x10/0x30
__kasan_kmalloc+0x77/0x90
__kmalloc_noprof+0x188/0x400
metadata_dst_alloc+0x1f/0x4e0
macsec_newlink+0x914/0x1410
__rtnl_newlink+0xe08/0x15b0
rtnl_newlink+0x5f/0x90
rtnetlink_rcv_msg+0x667/0xa80
netlink_rcv_skb+0x12c/0x360
netlink_unicast+0x551/0x770
netlink_sendmsg+0x72d/0xbd0
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x52e/0x6a0
___sys_sendmsg+0xeb/0x170
__sys_sendmsg+0xb5/0x140
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 4011:
kasan_save_stack+0x20/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x50
poison_slab_object+0x10c/0x190
__kasan_slab_free+0x11/0x30
kfree+0xe0/0x290
macsec_free_netdev+0x3f/0x140
netdev_run_todo+0x450/0xc70
rtnetlink_rcv_msg+0x66f/0xa80
netlink_rcv_skb+0x12c/0x360
netlink_unicast+0x551/0x770
netlink_sendmsg+0x72d/0xbd0
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x52e/0x6a0
___sys_sendmsg+0xeb/0x170
__sys_sendmsg+0xb5/0x140
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20241021100309.234125-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: sched: fix some lock issues
Two small fixes related to the MPTCP packets scheduler:
- Patch 1: add missing rcu_read_(un)lock(). A fix for >= 6.6.
And some modifications in the MPTCP selftests:
- Patch 2: a small addition to the MPTCP selftests to cover more code.
====================
Link: https://patch.msgid.link/20241021-net-mptcp-sched-lock-v1-0-637759cf061c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Listing all the values linked to the MPTCP sysctl knobs was not
exercised in MPTCP test suite.
Let's do that to avoid any regressions, but also to have a kernel with a
debug kconfig verifying more assumptions. For the moment, we are not
interested by the output, only to avoid crashes and warnings.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241021-net-mptcp-sched-lock-v1-3-637759cf061c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enabling CONFIG_PROVE_RCU_LIST with its dependence CONFIG_RCU_EXPERT
creates this splat when an MPTCP socket is created:
=============================
WARNING: suspicious RCU usage
6.12.0-rc2+ #11 Not tainted
-----------------------------
net/mptcp/sched.c:44 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by mptcp_connect/176.
stack backtrace:
CPU: 0 UID: 0 PID: 176 Comm: mptcp_connect Not tainted 6.12.0-rc2+ #11
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822)
mptcp_sched_find (net/mptcp/sched.c:44 (discriminator 7))
mptcp_init_sock (net/mptcp/protocol.c:2867 (discriminator 1))
? sock_init_data_uid (arch/x86/include/asm/atomic.h:28)
inet_create.part.0.constprop.0 (net/ipv4/af_inet.c:386)
? __sock_create (include/linux/rcupdate.h:347 (discriminator 1))
__sock_create (net/socket.c:1576)
__sys_socket (net/socket.c:1671)
? __pfx___sys_socket (net/socket.c:1712)
? do_user_addr_fault (arch/x86/mm/fault.c:1419 (discriminator 1))
__x64_sys_socket (net/socket.c:1728)
do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
That's because when the socket is initialised, rcu_read_lock() is not
used despite the explicit comment written above the declaration of
mptcp_sched_find() in sched.c. Adding the missing lock/unlock avoids the
warning.
Fixes: 1730b2b2c5a5 ("mptcp: add sched in mptcp_sock")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/523
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241021-net-mptcp-sched-lock-v1-1-637759cf061c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The original link returns 404 now. This commit replaces the dead google
site link with archive.org link.
Signed-off-by: Levi Zim <rsworktech@outlook.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20241021-packet_mmap_fix_link-v1-1-dffae4a174c0@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the allocation of chip->auth to tpm2_start_auth_session() so that this
field can be used as flag to tell whether auth session is active or not.
Instead of flushing and reloading the auth session for every transaction
separately, keep the session open unless /dev/tpm0 is used.
Reported-by: Pengyu Ma <mapengyu@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219229
Cc: stable@vger.kernel.org # v6.10+
Fixes: 7ca110f2679b ("tpm: Address !chip->auth in tpm_buf_append_hmac_session*()")
Tested-by: Pengyu Ma <mapengyu@gmail.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Several OA registers and allowlist registers were missing from the
save/restore list for GuC and could be lost during an engine reset. Add
them to the list.
v2:
- Fix commit message (Umesh)
- Add missing closes (Ashutosh)
v3:
- Add missing fixes (Ashutosh)
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2249
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Suggested-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Suggested-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
CC: stable@vger.kernel.org # v6.11+
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023200716.82624-1-jonathan.cavitt@intel.com
|
|
The following 3 commits landed in parallel:
commit d7d2688bf4ea ("drm/amd/pm: update workload mask after the setting")
commit 7a1613e47e65 ("drm/amdgpu/smu13: always apply the powersave optimization")
commit 7c210ca5a2d7 ("drm/amdgpu: handle default profile on on devices without fullscreen 3D")
While everything is set correctly, this caused the profile to be
reported incorrectly because both the powersave and fullscreen3d bits
were set in the mask and when the driver prints the profile, it looks
for the first bit set.
Fixes: d7d2688bf4ea ("drm/amd/pm: update workload mask after the setting")
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ecfe9b237687a55d596fff0650ccc8cc455edd3f)
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of driver specific fixes for SPI, there's nothing
particularly remarkable about any of them"
* tag 'spi-fix-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-dspi: Fix crash when not using GPIO chip select
spi: geni-qcom: Fix boot warning related to pm_runtime and devres
spi: mtk-snfi: fix kerneldoc for mtk_snand_is_page_ops()
spi: stm32: fix missing device mode capability in stm32mp25
|
|
KASAN reports that the GPU metrics table allocated in
vangogh_tables_init() is not large enough for the memset done in
smu_cmn_init_soft_gpu_metrics(). Condensed report follows:
[ 33.861314] BUG: KASAN: slab-out-of-bounds in smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu]
[ 33.861799] Write of size 168 at addr ffff888129f59500 by task mangoapp/1067
...
[ 33.861808] CPU: 6 UID: 1000 PID: 1067 Comm: mangoapp Tainted: G W 6.12.0-rc4 #356 1a56f59a8b5182eeaf67eb7cb8b13594dd23b544
[ 33.861816] Tainted: [W]=WARN
[ 33.861818] Hardware name: Valve Galileo/Galileo, BIOS F7G0107 12/01/2023
[ 33.861822] Call Trace:
[ 33.861826] <TASK>
[ 33.861829] dump_stack_lvl+0x66/0x90
[ 33.861838] print_report+0xce/0x620
[ 33.861853] kasan_report+0xda/0x110
[ 33.862794] kasan_check_range+0xfd/0x1a0
[ 33.862799] __asan_memset+0x23/0x40
[ 33.862803] smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.863306] vangogh_get_gpu_metrics_v2_4+0x123/0xad0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.864257] vangogh_common_get_gpu_metrics+0xb0c/0xbc0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.865682] amdgpu_dpm_get_gpu_metrics+0xcc/0x110 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.866160] amdgpu_get_gpu_metrics+0x154/0x2d0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.867135] dev_attr_show+0x43/0xc0
[ 33.867147] sysfs_kf_seq_show+0x1f1/0x3b0
[ 33.867155] seq_read_iter+0x3f8/0x1140
[ 33.867173] vfs_read+0x76c/0xc50
[ 33.867198] ksys_read+0xfb/0x1d0
[ 33.867214] do_syscall_64+0x90/0x160
...
[ 33.867353] Allocated by task 378 on cpu 7 at 22.794876s:
[ 33.867358] kasan_save_stack+0x33/0x50
[ 33.867364] kasan_save_track+0x17/0x60
[ 33.867367] __kasan_kmalloc+0x87/0x90
[ 33.867371] vangogh_init_smc_tables+0x3f9/0x840 [amdgpu]
[ 33.867835] smu_sw_init+0xa32/0x1850 [amdgpu]
[ 33.868299] amdgpu_device_init+0x467b/0x8d90 [amdgpu]
[ 33.868733] amdgpu_driver_load_kms+0x19/0xf0 [amdgpu]
[ 33.869167] amdgpu_pci_probe+0x2d6/0xcd0 [amdgpu]
[ 33.869608] local_pci_probe+0xda/0x180
[ 33.869614] pci_device_probe+0x43f/0x6b0
Empirically we can confirm that the former allocates 152 bytes for the
table, while the latter memsets the 168 large block.
Root cause appears that when GPU metrics tables for v2_4 parts were added
it was not considered to enlarge the table to fit.
The fix in this patch is rather "brute force" and perhaps later should be
done in a smarter way, by extracting and consolidating the part version to
size logic to a common helper, instead of brute forcing the largest
possible allocation. Nevertheless, for now this works and fixes the out of
bounds write.
v2:
* Drop impossible v3_0 case. (Mario)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 41cec40bc9ba ("drm/amd/pm: Vangogh: Add new gpu_metrics_v2_4 to acquire gpu_metrics")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Wenyou Yang <WenYou.Yang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241025145639.19124-1-tursulin@igalia.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0880f58f9609f0200483a49429af0f050d281703)
Cc: stable@vger.kernel.org # v6.6+
|
|
EnhancedPrefetchScheduleAccelerationFinal DCN35"
This reverts
commit 9dad21f910fc ("drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35")
[why & how]
The offending commit exposes a hang with lid close/open behavior.
Both issues seem to be related to ODM 2:1 mode switching, so there
is another issue generic to that sequence that needs to be
investigated.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68bf95317ebf2cfa7105251e4279e951daceefb7)
Cc: stable@vger.kernel.org
|
|
The following 3 commits landed in parallel:
commit d7d2688bf4ea ("drm/amd/pm: update workload mask after the setting")
commit 7a1613e47e65 ("drm/amdgpu/smu13: always apply the powersave optimization")
commit 7c210ca5a2d7 ("drm/amdgpu: handle default profile on on devices without fullscreen 3D")
While everything is set correctly, this caused the profile to be
reported incorrectly because both the powersave and fullscreen3d bits
were set in the mask and when the driver prints the profile, it looks
for the first bit set.
Fixes: d7d2688bf4ea ("drm/amd/pm: update workload mask after the setting")
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Flag KFD support for per-queue reset on GFX9 devices.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- skip to print CE ACA log.
- optimize ACA log print for MCA.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Separated xgmi ta is required for specific APU, and driver needs
parse the ta binary properly with aux xgmi ta packed.
v2: make the check function more generic (Lijo)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To check the status of S3 suspend completion,
use the PM core pm_suspend_global_flags bit(1)
to detect S3 abort events. Therefore, clean up
the AMDGPU driver's private flag suspend_complete.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In the normal S3 entry, the TOS cycle counter is not
reset during BIOS execution the _S3 method, so it doesn't
determine whether the _S3 method is executed exactly.
Howerver, the PM core performs the S3 suspend will set the
PM_SUSPEND_FLAG_FW_RESUME bit if all the devices suspend
successfully. Therefore, drivers can check the
pm_suspend_global_flags bit(1) to detect the S3 suspend
abort event.
Fixes: 6704dbf71928 ("drm/amdgpu: update suspend status for aborting from deeper suspend")
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
KASAN reports that the GPU metrics table allocated in
vangogh_tables_init() is not large enough for the memset done in
smu_cmn_init_soft_gpu_metrics(). Condensed report follows:
[ 33.861314] BUG: KASAN: slab-out-of-bounds in smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu]
[ 33.861799] Write of size 168 at addr ffff888129f59500 by task mangoapp/1067
...
[ 33.861808] CPU: 6 UID: 1000 PID: 1067 Comm: mangoapp Tainted: G W 6.12.0-rc4 #356 1a56f59a8b5182eeaf67eb7cb8b13594dd23b544
[ 33.861816] Tainted: [W]=WARN
[ 33.861818] Hardware name: Valve Galileo/Galileo, BIOS F7G0107 12/01/2023
[ 33.861822] Call Trace:
[ 33.861826] <TASK>
[ 33.861829] dump_stack_lvl+0x66/0x90
[ 33.861838] print_report+0xce/0x620
[ 33.861853] kasan_report+0xda/0x110
[ 33.862794] kasan_check_range+0xfd/0x1a0
[ 33.862799] __asan_memset+0x23/0x40
[ 33.862803] smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.863306] vangogh_get_gpu_metrics_v2_4+0x123/0xad0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.864257] vangogh_common_get_gpu_metrics+0xb0c/0xbc0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.865682] amdgpu_dpm_get_gpu_metrics+0xcc/0x110 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.866160] amdgpu_get_gpu_metrics+0x154/0x2d0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.867135] dev_attr_show+0x43/0xc0
[ 33.867147] sysfs_kf_seq_show+0x1f1/0x3b0
[ 33.867155] seq_read_iter+0x3f8/0x1140
[ 33.867173] vfs_read+0x76c/0xc50
[ 33.867198] ksys_read+0xfb/0x1d0
[ 33.867214] do_syscall_64+0x90/0x160
...
[ 33.867353] Allocated by task 378 on cpu 7 at 22.794876s:
[ 33.867358] kasan_save_stack+0x33/0x50
[ 33.867364] kasan_save_track+0x17/0x60
[ 33.867367] __kasan_kmalloc+0x87/0x90
[ 33.867371] vangogh_init_smc_tables+0x3f9/0x840 [amdgpu]
[ 33.867835] smu_sw_init+0xa32/0x1850 [amdgpu]
[ 33.868299] amdgpu_device_init+0x467b/0x8d90 [amdgpu]
[ 33.868733] amdgpu_driver_load_kms+0x19/0xf0 [amdgpu]
[ 33.869167] amdgpu_pci_probe+0x2d6/0xcd0 [amdgpu]
[ 33.869608] local_pci_probe+0xda/0x180
[ 33.869614] pci_device_probe+0x43f/0x6b0
Empirically we can confirm that the former allocates 152 bytes for the
table, while the latter memsets the 168 large block.
Root cause appears that when GPU metrics tables for v2_4 parts were added
it was not considered to enlarge the table to fit.
The fix in this patch is rather "brute force" and perhaps later should be
done in a smarter way, by extracting and consolidating the part version to
size logic to a common helper, instead of brute forcing the largest
possible allocation. Nevertheless, for now this works and fixes the out of
bounds write.
v2:
* Drop impossible v3_0 case. (Mario)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 41cec40bc9ba ("drm/amd/pm: Vangogh: Add new gpu_metrics_v2_4 to acquire gpu_metrics")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Wenyou Yang <WenYou.Yang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241025145639.19124-1-tursulin@igalia.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version brings along following fixes:
- Fix polling DSC registers during S0i3
- Fix idle optimizations entry log
- Change MPC Tree visual confirm colours
- Fix underflow when playing 8K video in full screen mode
- Optimize power up sequence for specific OLED
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add some scruct for secure display.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Previously dscl_prog_data stored pointer to sharpness 1dlut table.
SPL had four pre-generated tables, one for each setup. This allowed
us to minimize number of times we had to recalculate table when
switching between setups.
However, with dual display, this becomes an issue because for a given
setup, we could have a different per app sharpness value than the
global sharpness value. So the pre-generated table will change
but both displays may point to the same table and one of them
will have the wrong sharpness setting.
[How]
Store the sharpness 1dlut table in dscl_prog_data. This ensures
that each display can have its own sharpness setting.
Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
DSC may be power gated when coming out of S0i3, so avoid polling
DSC registers since it will fail anyways. Only read if it is known
that DSC is in use.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Whether we really enter idle optimizations are decided within DC.
Printing into dmesg before calling the DC API gives an incorrect
indication that we are entering idle optimization in cases where its
disabled manually.
To fix this, remove the print in DM and add them in DC
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
MPC background colours that use fractional components look different if
MPC OGAM is in use vs in bypass mode. The current red and orange colours
look very similar when OGAM is in bypass, so the colours need to change
to be consistently very easy to tell apart.
[How]
Use colours that only have 0 or MAX values in each component
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT & HOW]
The variable "ips_supported" is redundant and we can return from
dcn35_smu_get_ips_supported directly.
This fixes 1 UNUSED_VALUE issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT & HOW]
misc0, temp and split_pipe are assigned but immediately re-assigned
to other values. The early assignments are useless and are removed.
Unused variables are removed as well.
This fixes 5 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
If max_downscale_src_width check fails, we exit early from
spl_calculate_scaler_params but dscl_prog_data is not fully
populated. If viewport is left at 0, it can cause crash in dml.
[How]
Call spl_set_dscl_prog_data before we exit early from
spl_calculate_scaler_params to populate dscl_prog_data
Populate taps in spl_get_optimal_number_of_taps
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
Flickering observed while playing 8k HEVC-10 bit video in full screen
mode with black border. We didn't support this case for subvp.
Make change to the existing check to disable subvp for this corner case.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
For Header related changes for core
[How]
Refactoring if and endif statements to enable DC_LOGGER
Reviewed-by: Mounika Adhuri <mounika.adhuri@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Lohita Mudimela <lohita.mudimela@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix DP Compliance test 4.2.1.3, 4.2.2.8, 4.3.1.12, 4.3.1.13
when IPS enabled.
Original HPD detection interval is set to 5s which violates DP
compliance.
Reduce the interval parameter, such that link training can be
finished within 5 seconds.
Fixes: afca033f10d3 ("drm/amd/display: Add periodic detection for IPS")
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
EnhancedPrefetchScheduleAccelerationFinal DCN35"
This reverts
commit 9dad21f910fc ("drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35")
[why & how]
The offending commit exposes a hang with lid close/open behavior.
Both issues seem to be related to ODM 2:1 mode switching, so there
is another issue generic to that sequence that needs to be
investigated.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
Adds support for P-State stall timeout detection in DCHUBBUB.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Spread on DPREFCLK by 0.3 percent can have a negative effect on sink
when PHY SSC is also spread by 0.3 percent
[How]
Add boot option for DMU to lower PHY SSC
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
OLED power up sequence takes an extra 150ms via hardcoded delay,
but there is a strict requirement on DisplayOn resume time.
For customer panel, remove these delays to meet target until a
cleaner solution is can be put in place.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Volatile only prevents the compiler from re-ordering reads and writes.
Since we always only modify the ring buffer from one CPU thread and have
an explicit barrier before signaling the HW this should have no effect at
all and just prevents compiler optimisations.
While at it drop the local variables as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace the last few remaining instances of string enable(d)/disable(d)
choices with the linux string choice helpers to avoid further
cocci warnings.
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023054655.4017489-1-sai.teja.pottumuttu@intel.com
|
|
There has been an update to the BSpec in which we need to set
tx_misc=0x5 field for C20 TX Context programming for HDMI TMDS for
Xe2_LPD and newer. That field is mapped to the bits 7:0 of
SRAM_GENERIC_<A/B>_TX_CNTX_CFG_1, which in turn translates to tx[1] of
our state struct. Update the algorithm to reflect this change.
v2:
- Fix Bspec reference (Sai Teja)
- Use struct intel_display instead of drm_i915_private. (Jani)
- Use the correct bit width for C20_PHY_TX_MISC_MASK. (Jani)
Bspec: 74491
Cc: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com> #v1
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023153352.144146-3-gustavo.sousa@intel.com
|
|
The variable crtc_state already contains everything that
intel_c20_compute_hdmi_tmds_pll() needs. Simplify the function's
signature by passing that struct instead of separate variables.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023153352.144146-2-gustavo.sousa@intel.com
|
|
blk_rq_map_user_bvec currently only has ad-hoc checks for queue limits,
and the last fix to it enabled valid NVMe I/O to pass, but also allowed
invalid one for drivers that set a max_segment_size or seg_boundary
limit.
Fix it once for all by using the bio_split_rw_at helper from the I/O
path that indicates if and where a bio would be have to be split to
adhere to the queue limits, and it returns a positive value, turn that
into -EREMOTEIO to retry using the copy path.
Fixes: 2ff949441802 ("block: fix sanity checks in blk_rq_map_user_bvec")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241028090840.446180-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
drm_gpu_scheduler.submit_wq is used to submit jobs, jobs are in the path
of dma-fences, and dma-fences are in the path of reclaim. Mark scheduler
work queue with WQ_MEM_RECLAIM to ensure forward progress during
reclaim; without WQ_MEM_RECLAIM, work queues cannot make forward
progress during reclaim.
v2:
- Fixes tags (Philipp)
- Reword commit message (Philipp)
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Philipp Stanner <pstanner@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 34f50cc6441b ("drm/sched: Use drm sched lockdep map for submit_wq")
Fixes: a6149f039369 ("drm/sched: Convert drm scheduler to use a work queue rather than kthread")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023235917.1836428-1-matthew.brost@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Fix the new "LPE0F28" code path using the uninitialized ctx variable
to log an error.
Fixes: 6668610b4d8c ("ASoC: Intel: sst: Support LPE0F28 ACPI HID")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410261106.EBx49ssy-lkp@intel.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241026143615.171821-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clang-19 and above sometimes end up with multiple copies of the large
a6xx_hfi_msg_bw_table structure on the stack. The problem is that
a6xx_hfi_send_bw_table() calls a number of device specific functions to
fill the structure, but these create another copy of the structure on
the stack which gets copied to the first.
If the functions get inlined, that busts the warning limit:
drivers/gpu/drm/msm/adreno/a6xx_hfi.c:631:12: error: stack frame size (1032) exceeds limit (1024) in 'a6xx_hfi_send_bw_table' [-Werror,-Wframe-larger-than]
Fix this by kmalloc-ating struct a6xx_hfi_msg_bw_table instead of using
the stack. Also, use this opportunity to skip re-initializing this table
to optimize gpu wake up latency.
Cc: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/621814/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
As there are duplicated kernel headers in tools/include libc can pick
up the wrong definitions. This was causing the wrong system call for
capget in perf.
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: e25ebda78e230283 ("perf cap: Tidy up and improve capability testing")
Closes: https://lore.kernel.org/lkml/cc7d6bdf-1aeb-4179-9029-4baf50b59342@intel.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241026055448.312247-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The etnaviv_cmdbuf.c doesn't reference any functions or data members
defined in drm_mm.h, remove unneeded headers may reduce kernel compile
times.
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
Because it is not get used, drop it.
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
The shader L1 cache is a writeback cache for shader loads/stores
and thus must be flushed before any BOs backing the shader buffers
are potentially freed.
Cc: stable@vger.kernel.org
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
Since the kernel ringbuffers are allocated from a larger suballocated
area, same as the user commandbufs, they don't need to be CPU page
sized. Allocate 4KB for the kernel ring buffers, as we never use more
than that.
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
Etnaviv assumes that GPU page size is 4KiB, however, GPUVA ranges collision
when using softpin capable GPUs on a non 4KiB CPU page size configuration.
The root cause is that kernel side BO takes up bigger address space than
userspace expect, the size of backing memory of GEM buffer objects are
required to align to the CPU PAGE_SIZE. Therefore, results in userspace
allocated GPUVA range fails to be inserted to the specified hole exactly.
To solve this problem, record the GPU visiable size of a BO firstly, then
map and unmap the SG entry strictly with respect to the total GPUVA size.
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|