summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-20Merge tag 'ti-k3-dt-for-v6.5' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.5 New Boards: phyBOARD-Lyra-AM625 Board support Toradex Verdin AM62 COM, carrier and dev boards New features: Across K3 SoCs: - Error Signaling Module(ESM) and Secproxy IPC modules - On board I2C EEPROM - Voltage Temp Monitoring (VTM) module - DM timers (GP Timers) J784s4: - R5 and C7x DSP remoteproc, ADC, QSPI AM69: - Addition of more peripherals: CPSW, eMMC, UARTs, I2C et al J721s2: - USB, Serdes, OSPI, PCIe AM62a: - Watchdog J721e: - HyperFlash/HyperBus AM62: - Type-C USB0 port Cleanups and non-urgent fixes Particularly large set of cleanups to get rid of dtbs_check errors and dtc warnings: - Addition of missing pinmux and uart nodes for AM64, AM62x, AM62A, J721e, J7200 that are used by bootloader - Split Pinmux regions/range to avoid holes for J721s2, J7200, J784s4 - Drop bootargs and unneeded aliases across all K3 SoCs - Move aliases to board dts files from SoC dtsi files - Move to generic node name for can, rtc nodes on am65 - s/-pins-default/default-pins/ to match upcoming pinctrl.yaml update - Fix pinctrl phandle references to use <> as separator where multiple entries are present * tag 'ti-k3-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (153 commits) arm64: dts: ti: Unify pin group node names for make dtbs checks arm64: dts: ti: add verdin am62 yavia arm64: dts: ti: add verdin am62 dahlia arm64: dts: ti: add verdin am62 dt-bindings: arm: ti: add toradex,verdin-am62 et al. arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625 dt-bindings: arm: ti: Add bindings for PHYTEC AM62x based hardware arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix from nodename arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom arm64: dts: ti: k3-am64: Add ESM support arm64: dts: ti: k3-am62: Add ESM support arm64: dts: ti: k3-j7200: Add ESM support arm64: dts: ti: k3-j721e: Add ESM support dt-bindings: misc: esm: Add ESM support for TI K3 devices arm64: dts: ti: k3-j721s2-som-p0: Enable wakeup_i2c0 and eeprom arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux arm64: dts: ti: k3-am68-sk-som: Enable wakeup_i2c0 and eeprom arm64: dts: ti: k3-am68-sk-base-board: Add uart pinmux arm64: dts: ti: k3-am68-sk-base-board: Add pinmux for RPi Header arm64: dts: ti: k3-j721s2: Fix wkup pinmux range ... Link: https://lore.kernel.org/r/7fe0c6de-cb99-9c89-8583-b3855fde16f8@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'zynqmp-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
soc/dt arm64: ZynqMP DT changes for v6.5 Various small fixes and cleanups to be aligned with the latest dt-schema. Other major changes are: - Wire mali-400 gpu - Change board name for zcu1275 - Use ethernet-phy-id to handle ETH phy reset properly - Switch to amd.com emails - Update people in DT bindings * tag 'zynqmp-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx: (33 commits) dt-bindings: usb: xilinx: Replace Manish by Piyush dt-bindings: xilinx: Remove Rajan, Jolly and Manish arm64: zynqmp: Used fixed-partitions for QSPI in k26 arm64: zynqmp: Add pmu interrupt-affinity arm64: zynqmp: Set qspi tx-buswidth to 4 arm64: zynqmp: Fix usb node drive strength and slew rate arm64: zynqmp: Describe TI phy as ethernet-phy-id arm64: zynqmp: Switch to amd.com emails arm64: zynqmp: Convert kv260-revA overlay to ASCII text dt-bindings: xilinx: Switch xilinx.com emails to amd.com arm64: xilinx: Use zynqmp prefix for SOM dt overlays arm64: zynqmp: Add phase tags marking arm64: zynqmp: Describe bus-width for SD card on KV260 arm64: zynqmp: Enable AMS on SOM and other zcu10x boards arm64: zynqmp: Enable DP driver for SOMs arm64: zynqmp: Setup clock for DP and DPDMA arm64: zynqmp: Switch to ethernet-phy-id in kv260 arm64: zynqmp: Disable USB3.0 for zc1751-xm016-dc2 arm64: zynqmp: Add pinctrl emmc description to SM-K26 arm64: zynqmp: Add gpio labels for modepin gpio ... Link: https://lore.kernel.org/r/CAHTX3d+2s_KmCnd=x5hydGb+LYoznAzYGTizvqqN2NFmrBurfw@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'riscv-dt-for-v6.5' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt RISC-V Devicetrees for v6.5 StarFive: Watchdog nodes for both the JH7110 & its forerunner, the JH7100. PMU, P being power, support for the JH7110. PMIC and frequency scaling support for the JH7110 equipped VisionFive 2. Most of the DT bits for the JH7110, and the SBCs using it, are pending support for one of the clock controllers, so it's a smaller set of changes than I would have hoped for. Misc: Pick up some dt-binding cleanup that Palmer assigned to me & had no uptake from the respective maintainers. My powers of estimation failed me again, with part of my motivation for picking them up being the addition of new platforms that ended up not making it. Hopefully next window for those, as they were relatively close. Exclude the Allwinner and Renesas subdirectories from the Misc. MAINTAINERS entry, since I do not take care of those. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: starfive: Add cpu scaling for JH7110 SoC riscv: dts: starfive: Enable axp15060 pmic for cpufreq dt-bindings: interrupt-controller: sifive,plic: Sort compatible values dt-bindings: timer: sifive,clint: Clean up compatible value section riscv: dts: starfive: jh7110: Add watchdog node riscv: dts: starfive: jh7100: Add watchdog node riscv: dts: starfive: Add PMU controller node MAINTAINERS: exclude maintained subdirs in RISC-V misc DT entry Link: https://lore.kernel.org/r/20230612-fasting-floss-0bc05a08bc7a@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controllerSam Protsenko
As described in the corresponding binding documentation for "samsung,exynos850-pmu", the "clocks" property should be used for specifying CLKOUT mux inputs. Therefore, the clock provided to exynos850 pmu_system_controller is incorrect and should be removed. Instead of making syscon regmap keep that clock running for PMU accesses, it should be made always running in the clock driver, because the kernel is not the only software accessing PMU registers on Exynos850 platform. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20230308233822.31180-8-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230612180102.289745-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'v6.5-rockchip-dts64-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards are - Indiedroid Nova (rk3588) - Add Edgeble Neural Compute Module 6B (rk3588) - FriendlyARM NanoPi R2C Plus (rk3328) - Anbernic RG353PS (rk3566) - Lunzn Fastrhino R66S / R68S (rk3568) The rk3588 got a lot of attention and gained support for the GIC ITS (needed an errata from Rockchip), timers, otp memory, saradc and sdio. The rk356x got support for its RGA block With all the core improvements to rk3588 support, the Rock5b got a lot improvements from that too, namely support for its PMIC, sd-card and saradc, as well as a clock-rate fix for its es8316 codec. Similarly the rk3588-evb1 also got support for its PMIC. The Anberic RGxx3 series got a better bluetooth compatible and updates to its LEDs to make them use the PWM blocks they're connected to. * tag 'v6.5-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits) arm64: dts: rockchip: Add saradc node to rock5b arm64: dts: rockchip: Fix compatible for Bluetooth on rk3566-anbernic arm64: dts: rockchip: Add SD card support to rock-5b arm64: dts: rockchip: add PMIC to rock-5b arm64: dts: rockchip: Assign ES8316 MCLK rate on rk3588-rock-5b arm64: dts: rockchip: Add Indiedroid Nova board dt-bindings: arm: rockchip: Add Indiedroid Nova dt-bindings: vendor-prefixes: add Indiedroid arm64: dts: rockchip: Add sdio node to rk3588 arm64: dts: rockchip: add default pinctrl for rk3588 emmc arm64: dts: rockchip: Add DT node for ADC support in RK3588 arm64: dts: rockchip: add PMIC to rk3588-evb1 arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B IO arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B SoM arm64: dts: rockchip: Add Rockchip RK3588J dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 6B arm64: dts: rockchip: Add RGA2 support to rk356x media: dt-bindings: media: rockchip-rga: add rockchip,rk3568-rga arm64: dts: rockchip: Add rk3588 OTP node arm64: dts: rockchip: Add FriendlyARM NanoPi R2C Plus ... Link: https://lore.kernel.org/r/3239799.44csPzL39Z@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'qcom-dts-for-6.5' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM32 DeviceTree updates for v6.5 NAND support on IPQ4019 boards is restored, after a faulty node rename. On MSM8226 IMEM, PMU and RPM stats are introduced. The Huawei Watch gains vibrator support. On MSM8974, the LGE Nexus 5 gains vibrator support. The APQ8074 Dragonboard marks BLSP2 BAM controlled remotely, DSI panel, audio and modem DSPs are enabled. On SDX65 PCIe controller and PHY are introduced, to provide endpoint functionality. This is enabled on the related MTP. A range of DeviceTree cleanups are also included. * tag 'qcom-dts-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits) ARM: dts: qcom: apq8074-dragonboard: enable DSI panel ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS ARM: dts: qcom: apq8074-dragonboard: Set DMA as remotely controlled ARM: dts: qcom: apq8026-huawei-sturgeon: Add vibrator ARM: dts: qcom: msm8226: Add IMEM node ARM: dts: qcom: msm8226: Add rpm-stats device node ARM: dts: qcom: msm8226: Add PMU node ARM: dts: qcom: sdx65-mtp: Enable PCIe EP ARM: dts: qcom: sdx65-mtp: Enable PCIe PHY ARM: dts: qcom: sdx65: Add support for PCIe EP ARM: dts: qcom: sdx65: Add support for PCIe PHY ARM: dts: qcom: msm8974: align WCNSS Bluetooth node name with bindings ARM: dts: qcom: apq8084: correct thermal sensor unit-address ARM: dts: qcom: msm8960-cdp: move regulator out of simple-bus ARM: dts: qcom: apq8060-dragonboard: move regulators out of simple-bus ARM: dts: qcom: ipq8064: align USB node names with bindings ARM: dts: qcom: ipq8064: correct LED node names ARM: dts: qcom: ipq8064: drop invalid GCC thermal-sensor unit-address ARM: dts: qcom: ipq8064: drop leading 0 from unit-address ARM: dts: qcom: msm8974: correct pronto unit-address ... Link: https://lore.kernel.org/r/20230611010843.2482142-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'qcom-arm64-for-6.5' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM64 DeviceTree updates for v6.5 This introduces the RDP442 and RDP433 reference devices on IPQ5332 and IPQ9574, respectively. RDP418, RDP433, RDP449 and RDP453 on the IPQ9574 are added. On MSM8939 the Square T2 board and the Sony Xperia M4 Aqua is added. Support for Acer Apire 1, built on the Snapdragon 7c platform is introduced. Fxtec Pro1X on SM6115 is added. Lastly long floating support for SC8180X and the Lenovo Flex 5G, and the Primus reference device, has been added. On IPQ5332 and IPQ6018 QFPROM support is introduced, and as described above the RDP442 board on the prior. Download mode support and various reserved-memory regions are also introduced on IPQ6018. IPQ8074 gains another SPI controller. On IPQ9574 CPU frequency scaling, low speed busses, RNG, Watchdog, qfprom, SMEM and RPM are introduced. As are support for four new board, mentioned above. MSM8916 gains a range of structural improvements, to better suite the various boards supported. Regulator constraints are corrected and their states are adjusted to match reality (e.g. always-on regulators marked as always-on). BQ Aquaris X5 gains support for front flash LED. As mentioned above, MSM8939 support is introduced with support for boards from Sony and Square. MSM8953 gains DMA support in I2C masters. MSM8996-based Sony Xperia boards gains description of their RGB notification LED. On SA8775P support for UFS, USB, GPU clock and iommu controllers, PMU, AOSS, watchdog and missing low-speed controllers are added. On the Ride platform UFS, USB and an i2c bus are enabled. iommu properties are added to QSPI on both SC7180 and SC7280. LPASS clocks are adjusted and MDP node cleaned up slightly, on SC7180. As mentioned above, support for Acer Aspire 1 is introduced. Long lingering patches introducing SC8180X, the Lenovo Flex 5G and the Primus reference device has been merged. On SC8280XP ethernet is added and enabled on the automotive ride platform. An SDC controller is introduced and enabled on the SC8280XP CRD. On the Lenovo Thinkpad X13s and the CRD reference device the USB SuperSpeed phy is added to the Type-C graph, to enable support for orientation switching. Fairphone 3 gains support for its notification LED. On SDM845 the iommu stream for QSPI is defined, SHIFT SHIFT6mq gains support for flash LED and the RB3 (DB845c) board gains support for bonded/dual DSI-mode, to allow 4k output. On SM6115 CPU idle-states, crypto engine support and SuperSpeed USB PHY are introduced. As mentioned above Fxtec Pro1X is introduced. On the QRB4210 Robotics Platform RB2 USB, Audio and Compute DSPs, display, CAN-bus and GPIO LEDs are introduced, fixed regulators are described and the SD-card description is corrected. Support for crypto engine is added to SM8150, while Sony Xperia 1 and 5 gains SD-card support, camera regulators and GPIO line names sorted out. SM8250 also gets support for crypto engine, and Sony Xperia 1 II and 5 II gains support for hardware video accelerator. Crypto engine is introduced for SM8350 as well. The HDK gets the USB Type-C graph described for Superspeed orientation switching and DisplayPort output. On SM8450 video clock controller and crypto engine are added, missing opp levels are introduced and the USB Type-C graph is defined for orientation switching and altmode. SM8550 gains GPU and video clock controllers and missing opp levels are added. The WCD9385 audio codec is added for the SM8550 MTP and on the QRD PCIe, USB, audio display and flash LED are added. * tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (195 commits) arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G arm64: dts: qcom: sc8180x: Introduce Primus arm64: dts: qcom: sc8180x: Add pmics arm64: dts: qcom: sc8180x: Add display and gpu nodes arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes arm64: dts: qcom: sc8180x: Add PCIe instances arm64: dts: qcom: sc8180x: Add QUPs arm64: dts: qcom: sc8180x: Add thermal zones arm64: dts: qcom: sc8180x: Add interconnects and lmh arm64: dts: qcom: Introduce the SC8180x platform arm64: dts: qcom: msm8916: Move aliases to boards arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codec arm64: dts: qcom: msm8916/39: Clean up MDSS labels arm64: dts: qcom: msm8916/39: Use consistent name for I2C/SPI pinctrl arm64: dts: qcom: msm8916/39: Rename &blsp1_uartN -> &blsp_uartN arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm arm64: dts: qcom: qrb4210-rb2: Enable USB node arm64: dts: qcom: sm6115: Add USB SS qmp phy node arm64: dts: qcom: ipq5332: add support for the RDP442 variant dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family ... Link: https://lore.kernel.org/r/20230611004944.2481596-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'imx-dt64-6.5' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm64 device tree for 6.5: - New board support: i.MX8MM based Emtop SoM & Baseboard, NXP i.MX8MM EVKB board, i.MX8MP based Gateworks Venice gw7905-2x device. - A series from Adam Ford to add Camera and Audio support for i.MX8M based Beacon boards. - Add Audio output support for i.MX8MP TQMa8MPxL/MBa8MPxL board. - Add HDMI and display support for imx8mm-evk and imx8mm-phg board. - Add coresight trace devices support for i.MX8MP SoC. - A couple of changes from Krzysztof Kozlowski to add missing cache properties. - A couple of changes from Laurent Pinchart to add CSIS and ISI devices for i.MX8MP SoC. - A series from Marek Vasut to add more devices for i.MX8MP, and enable SAI audio on i.MX8MP DHCOM PDK2 and PDK3. - Correct GSC vdd_bat data size for Gateworks Venice devices. - Add more device support for i.MX93, Watchdog, OCOTP, idle states, DDR performance monitor, etc. - Small and random clean-ups and device node additions. * tag 'imx-dt64-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits) arm64: dts: imx8mq: Pass address-cells/size-cells to mipi_dsi arm64: dts: imx8mq: Use 'dsi' as node name arm64: dts: imx8mp-venice-gw702x: fix GSC vdd_bat data size arm64: dts: imx8mq-tqma8mq-mba8mx: Remove invalid properties arm64: dts: imx8mq: Add missing pci property arm64: dts: imx8mq: Fix lcdif clocks arm64: dts: imx8mq: Fix lcdif compatible arm64: dts: imx8mp: don't initialize audio clocks from CCM node arm64: dts: imx8mm-venice: Fix GSC vdd_bat data size. arm64: dts: imx8mp: Add coresight trace components arm64: dts: imx93: add ddr performance monitor node arm64: dts: imx8mm-phg: Add display support arm64: dts: tqma8mqml: Add vcc supply to i2c eeproms arm64: dts: imx8mm-evk: Add HDMI support arm64: dts: imx8mn-var-som-symphony: adapt FEC pinctrl for SOMs with onboard PHY arm64: dts: imx8mn-var-som: add 20ms delay to ethernet regulator enable arm64: dts: imx8mp-msc-sm2s: Add sound card arm64: dts: imx8mn-beacon: Migrate sound card to simple-audio-card arm64: dts: imx8mp-beacon-kit: Enable WM8962 Audio CODEC arm64: dts: imx93: add fsl,stop-mode property to support WOL ... Link: https://lore.kernel.org/r/20230610072530.418847-3-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'imx-dt-6.5' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX ARM device tree for 6.5: - New board support: Marantec Maveo Box. - Add HDMI support for TQMa6x/MBa6 board. - A series from Andrew Lunn to add phy-mode and fixed links for Ethernet devices on imx51, imx6qdl and vf610. - A bunch of changes from Fabio Estevam to clean up deprecated and invalid properies, fix up node names to remove dt-schema warnings. - A series of maintenance updates for Protonic Holland boards, mostly on the USB subsystem configuration, thermal zones, and the naming of GPIO keys. - Update dma-apbh device node name to remove dtbs_check warnings. - Remove invalid nodes from fan-controller for a couple of Gateworks boards. - Small random updates and clean-ups on various boards. * tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits) ARM: dts: imx6qdl: vicut1: rename power to power-button ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG port ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG port ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port ARM: dts: imx6dl: prtmvt: fix different USB related warnings ARM: dts: imx6dl: alti6p: fix different USB related warnings ARM: dts: imx6dl: vicut1: Address USB related warnings ARM: dts: imx6dl: Add trip points to thermal zones on several devices ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65 ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97 ARM: dts: imx: Use 'eeprom' as node name ARM: dts: imx6ul-ccimx6ulsom: Fix the "coin" regulator name ARM: dts: imx: Use 'pmic' as node name ARM: dts: imx6: Use the mux- prefix ARM: dts: imx7d-sdb: Allow UHS modes ... Link: https://lore.kernel.org/r/20230610072530.418847-2-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'imx-bindings-6.5' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX dt-bindings for 6.5: - Add vendor prefix for Emtop - Compatibles for Marantec Maveo Box, i.MX8MM-EVKB and GW7905-2x board. - Replace tab indent with spaces in fsl.yaml. * tag 'imx-bindings-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: Add Gateworks i.MX8M GW7905-2x board dt-bindings: arm: fsl: Fix syntax error dt-bindings: vendor-prefixes: Add Emtop dt-bindings: arm: fsl: Add Emtop SoM & Baseboard dt-bindings: arm: fsl: Add i.MX8MM-EVKB dt-bindings: arm: fsl: Add Marantec maveo box as a DHCOR i.MX6ULL SoM based board Link: https://lore.kernel.org/r/20230610072530.418847-1-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'sunxi-dt-for-6.5-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt - fix DCLK clock names - new board ICnova A20 ADB4006 - add D1 SPI node - add bluetooth node for chip board - add extra mmc2 pinmux to sun5i - add axp209 iio-hwmon node * tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: axp209: Add iio-hwmon node for internal temperature ARM: dts: sun5i: Add port E pinmux settings for mmc2 ARM: dts: sun5i: chip: Enable bluetooth riscv: dts: allwinner: d1: Add SPI controllers node arm: dts: sunxi: Add ICnova A20 ADB4006 board dt-bindings: arm: sunxi: add ICnova A20 ADB4006 binding ARM: dts: sunxi: rename tcon's clock output Link: https://lore.kernel.org/r/20230609210452.GA17638@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'tegra-for-6.5-arm64-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt arm64: tegra: Device tree changes for v6.5-rc1 This introduces support for the IGX Orin and Jetson Orin Nano devices and enables various additional features on the Jetson AGX Orin and Jetson Orin NX. This also enables some basic thermal support to prevent the devices from overheating. Support for the GPU on the Google Pixel C is enabled and various minor issues are fixed and cleaned up. * tag 'tegra-for-6.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Enable thermal support on Jetson Orin Nano arm64: tegra: Enable thermal support on Jetson Orin NX arm64: tegra: Enable thermal support on Jetson AGX Orin arm64: tegra: Add Tegra234 thermal support arm64: tegra: Add a few blank lines for better readability arm64: tegra: Sort properties more logically arm64: tegra: Enable GPU on Smaug arm64: tegra: Add GPU power rail regulator on Smaug arm64: tegra: Update USB phy-name for Jetson Orin NX arm64: tegra: Enable USB device for Jetson AGX Orin arm64: tegra: Add Tegra234 pin controllers arm64: tegra: Support Jetson Orin Nano Developer Kit arm64: tegra: Add missing cache properties on Tegra210 arm64: tegra: Fix PCIe regulator for Orin Jetson AGX arm64: tegra: Add CPU OPP tables and interconnects property arm64: tegra: Add support for IGX Orin Link: https://lore.kernel.org/r/20230609193620.2275240-6-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'tegra-for-6.5-dt-bindings' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt dt-bindings: Changes for v6.5-rc1 Several new modules and devices are documented and fixes incorporated for the Tegra234 GPIO controller pin mappings as well as the possible Tegra XUDC PHY connections. * tag 'tegra-for-6.5-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: tegra: Document Jetson Orin Nano Developer Kit dt-bindings: tegra: Document Jetson Orin Nano dt-bindings: gpio: Remove FSI domain ports on Tegra234 dt-bindings: usb: tegra-xudc: Remove extraneous PHYs dt-bindings: tegra: Add ICC IDs for dummy memory clients dt-bindings: tegra: Document compatible for IGX Link: https://lore.kernel.org/r/20230609193620.2275240-3-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'stm32-dt-for-v6.5-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.5, round 1 Highlights: ---------- - MCU/MPU: - Replace deprecated st,hw-flow-ctrl by uart-has-rtscts. - Fix LTDC/DSI warnings. - MPU: - STMP32MP15: - Add OTP part number and Vrefint calibration in bsec. - M4 hold management updated. As SMC call is deprecated, the service is moved on a SCMI service. - Add ADC internal channels (VREFINT/VDDCORE). - ST: - Enable ADC1&2 on STM32MP15 DKx boards. - Adopt generic IIO bindings on STM32MP157C ED1 - Add supplies for OV5640 in STM32MP157C EV1 to fix yaml validation. - Fix i2s bindings to match with the YAML validation (DKx boards). - DH: - Rearrange MAC EEPROM. - Rename AV96 sound card. - Adopt generic IIo bindings. - Fix audio routing. -PHYTEC: - Add PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM. This SOM embeds up to 1GB DDR3LP RAM, up to 1GB eMMC, up to 16 MB QSPI and up to 128 GB NAND flash. * tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits) ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2 ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1 ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1 ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards ARM: dts: stm32: add vrefint support to adc2 on stm32mp15 ARM: dts: stm32: add vrefint calibration on stm32mp15 ARM: dts: stm32: add adc internal channels to stm32mp15 ARM: dts: stm32: fix ltdc warnings in stm32mp15 boards ARM: dts: stm32: fix dsi warnings on stm32mp15 boards dt-bindings: display: st,stm32-dsi: Remove unnecessary fields ARM: dts: stm32: fix warnings on stm32f469-disco board ARM: dts: stm32: Shorten the AV96 HDMI sound card name ARM: dts: stm32: fix m4_rproc references to use SCMI for stm32mp15 ARM: dts: stm32: Update Cortex-M4 reset declarations on stm32mp15 ARM: dts: stm32: add STM32MP1-based Phytec board ... Link: https://lore.kernel.org/r/08d711de-bb6d-a976-735b-5e18b19818ea@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-15arm64: dts: ti: Unify pin group node names for make dtbs checksTony Lindgren
Prepare for pinctrl-single yaml binding and unify pin group node names. Let's standardize on pin group node naming ending in -pins. As we don't necessarily have a SoC specific compatible property for pinctrl-single. I'd rather not add a pattern match for pins somewhere in the name for all the users. Trying to add matches for pins-default will be futile as on the earlier SoCs we've already seen names like pins-sleep, pins-idle, pins-off and so on that would need to be matched. And as the node is a pin group, let's prefer to use naming -pins rather than -pin as more pins may need to be added to the pin group later on. Signed-off-by: Tony Lindgren <tony@atomide.com> [vigneshr@ti.com: Rebase onto latest ti/next and extend to new nodes] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: add verdin am62 yaviaFrancesco Dolcini
Add Toradex Verdin AM62 Yavia. Link: https://www.toradex.com/products/carrier-board/yavia Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20230615095058.33890-6-francesco@dolcini.it Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: add verdin am62 dahliaFrancesco Dolcini
Add Toradex Verdin AM62 Dahlia. Link: https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20230615095058.33890-5-francesco@dolcini.it Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: add verdin am62Francesco Dolcini
This patch adds the device tree to support Toradex Verdin AM62 a computer on module which can be used on different carrier boards and the Toradex Verdin Development Board carrier board. The module consists of an TI AM62 family SoC (either AM623 or AM625), a TPS65219 PMIC, a Gigabit Ethernet PHY, 512MB to 2GB of LPDDR4 RAM, an eMMC, a TLA2024 ADC, an I2C EEPROM, an RX8130 RTC, and optional Parallel RGB to MIPI DSI bridge plus an optional Bluetooth/Wi-Fi module. Anything that is not self-contained on the module is disabled by default. So far there is no display nor USB role switch supported, apart of that all the other functionalities are fine. Link: https://developer.toradex.com/hardware/verdin-som-family/modules/verdin-am62/ Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 Link: https://www.toradex.com/products/carrier-board/verdin-development-board-kit Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20230615095058.33890-4-francesco@dolcini.it Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15dt-bindings: arm: ti: add toradex,verdin-am62 et al.Francesco Dolcini
Add toradex,verdin-am62 for Toradex Verdin AM62 SoM, its nonwifi and wifi variants and the carrier boards (Dahlia, Verdin Development Board and Yavia) they may be mated in. Link: https://developer.toradex.com/hardware/verdin-som-family/modules/verdin-am62/ Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230615095058.33890-2-francesco@dolcini.it Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625Wadim Egorov
The phyCORE-AM62x [1] is a SoM (System on Module) featuring TI's AM62x SoC. It can be used in combination with different carrier boards. This module can come with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM62x family. A development Kit, called phyBOARD-Lyra [2] is used as a carrier board reference design around the AM62x SoM. Supported features: * Debug UART * SPI NOR Flash * eMMC * 2x Ethernet * Micro SD card * I2C EEPROM * I2C RTC * GPIO Expander * LEDs * USB For more details, see: [1] Product page SoM: https://www.phytec.com/product/phycore-am62x [2] Product page CB: https://www.phytec.com/product/phyboard-am62x Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230504140143.1425951-2-w.egorov@phytec.de Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15dt-bindings: arm: ti: Add bindings for PHYTEC AM62x based hardwareWadim Egorov
Add devicetree bindings for AM62x based phyCORE-AM62 SoM and phyBOARD-Lyra RDK. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230504140143.1425951-1-w.egorov@phytec.de Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix from nodenameNishanth Menon
unit-address should not use a 0x prefix. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230424173623.477577-2-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eepromNishanth Menon
Enable wakeup_i2c and use un-used pinmux. While at it, describe the board detection eeprom present on the board. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230601183151.1000157-6-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-am64: Add ESM supportNishanth Menon
Add Error Signaling Module (ESM) instances in MCU and MAIN domains. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230530185335.79942-3-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-am62: Add ESM supportNishanth Menon
Add Error Signaling Module (ESM) instances in MCU and MAIN domains. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230530185335.79942-2-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j7200: Add ESM supportNeha Malcom Francis
Add address entry mapping ESM on J7200. Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Link: https://lore.kernel.org/r/20230504080526.133149-4-n-francis@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j721e: Add ESM supportNeha Malcom Francis
Add address entry mapping ESM on J721E. Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Link: https://lore.kernel.org/r/20230504080526.133149-3-n-francis@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15dt-bindings: misc: esm: Add ESM support for TI K3 devicesNeha Malcom Francis
Document the binding for TI K3 ESM (Error Signaling Module) block. Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230504080526.133149-2-n-francis@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j721s2-som-p0: Enable wakeup_i2c0 and eepromNishanth Menon
Enable wakeup_i2c and use un-used pinmux. While at it, describe the board detection eeprom present on the board. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Udit Kumar <u-kumar1@ti.com> Link: https://lore.kernel.org/r/20230602153554.1571128-7-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmuxNishanth Menon
Define the wakeup uart pin-mux for completeness and add explicit muxing for mcu_uart0. This allows the device tree usage in bootloader and firmwares that can configure the same appropriately. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Udit Kumar <u-kumar1@ti.com> Link: https://lore.kernel.org/r/20230602153554.1571128-6-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-am68-sk-som: Enable wakeup_i2c0 and eepromNishanth Menon
Enable wakeup_i2c. While at it, describe the board detection eeprom present on the board. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Sinthu Raja <sinthu.raja@ti.com> Reviewed-by: Udit Kumar <u-kumar1@ti.com> Link: https://lore.kernel.org/r/20230602153554.1571128-5-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-am68-sk-base-board: Add uart pinmuxNishanth Menon
Define the wakeup uart pin-mux for completeness and add explicit muxing for mcu_uart0. This allows the device tree usage in bootloader and firmwares that can configure the same appropriately. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Udit Kumar <u-kumar1@ti.com> Link: https://lore.kernel.org/r/20230602153554.1571128-4-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-am68-sk-base-board: Add pinmux for RPi HeaderSinthu Raja
Add pinmux required to bring out the i2c and gpios on 40-pin RPi expansion header on the AM68 SK board. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Udit Kumar <u-kumar1@ti.com> Link: https://lore.kernel.org/r/20230602153554.1571128-3-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j721s2: Fix wkup pinmux rangeSinthu Raja
The WKUP_PADCONFIG register region in J721S2 has multiple non-addressable regions, accordingly split the existing wkup_pmx region as follows to avoid the non-addressable regions and include the rest of valid WKUP_PADCONFIG registers. Also update references to old nodes with new ones. wkup_pmx0 -> 13 pins (WKUP_PADCONFIG 0 - 12) wkup_pmx1 -> 11 pins (WKUP_PADCONFIG 14 - 24) wkup_pmx2 -> 72 pins (WKUP_PADCONFIG 26 - 97) wkup_pmx3 -> 1 pin (WKUP_PADCONFIG 100) Fixes: b8545f9d3a54 ("arm64: dts: ti: Add initial support for J721S2 SoC") Cc: <stable@vger.kernel.org> # 6.3 Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Thejasvi Konduru <t-konduru@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Udit Kumar <u-kumar1@ti.com> Link: https://lore.kernel.org/r/20230602153554.1571128-2-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j7200: Drop SoC level aliasesUdit Kumar
Aiases are defined at board level, so dropping from soc level Signed-off-by: Udit Kumar <u-kumar1@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230611111140.3189111-7-u-kumar1@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j7200-common-proc-board: Define aliases at board levelUdit Kumar
Define aliases at board level Signed-off-by: Udit Kumar <u-kumar1@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230611111140.3189111-6-u-kumar1@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j7200-common-proc-board: Add uart pinmuxUdit Kumar
Add main, mcu, wakeup domain uart0 pin mux into common board file and it's reference to uart node. Signed-off-by: Udit Kumar <u-kumar1@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230611111140.3189111-5-u-kumar1@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j7200-common-proc-board: remove duplicate main_i2c0 pin muxUdit Kumar
main_i2c0 pin mux was duplicated in som and common file. So removing duplicated node from common file. Signed-off-by: Udit Kumar <u-kumar1@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230611111140.3189111-4-u-kumar1@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j7200: Configure pinctrl for timer IO padsUdit Kumar
There are timer IO pads in the MCU domain, and in the MAIN domain. These pads can be muxed for the related timers. There are timer IO control registers for input and output. The registers for CTRLMMR_TIMER*_CTRL and CTRLMMR_MCU_TIMER*_CTRL are used to control the input. The registers for CTCTRLMMR_TIMERIO*_CTRL and CTRLMMR_MCU_TIMERIO*_CTRL the output. The multiplexing is documented in TRM "5.1.2.3.1.4 Timer IO Muxing Control Registers" and "5.1.3.3.1.5 Timer IO Muxing Control Registers", and the CASCADE_EN bit is documented in TRM "12.6.3.1 Timers Overview". For chaining timers, the timer IO control registers also have a CASCADE_EN input bit in the CTRLMMR_TIMER*_CTRL in the registers. The CASCADE_EN bit muxes the previous timer output, or possibly and external TIMER_IO pad source, to the input clock of the selected timer instance for odd numered timers. For the even numbered timers, the CASCADE_EN bit does not do anything. The timer cascade input routing options are shown in TRM "Figure 12-3224. Timers Overview". For handling beyond multiplexing, the driver support for timer cascading should be likely be handled via the clock framework. The MCU timer controls are also marked as reserved for usage by the MCU firmware. Cc: Nishanth Menon <nm@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Udit Kumar <u-kumar1@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230611111140.3189111-3-u-kumar1@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j7200: Add general purpose timersUdit Kumar
There are 20 general purpose timers on j721e that can be used for things like PWM using pwm-omap-dmtimer driver. There are also additional ten timers in the MCU domain which are meant for MCU firmware usage and hence marked reserved by default. The odd numbered timers have the option of being cascaded to even timers to create a 64 bit non-atomic counter which is racy in simple usage, hence the clock muxes are explicitly setup to individual 32 bit counters driven off system crystal (HFOSC) as default. Signed-off-by: Udit Kumar <u-kumar1@ti.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230611111140.3189111-2-u-kumar1@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j721e: Drop SoC level aliasesNishanth Menon
Drop the SoC level aliases as these need to be done at board level. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230601183151.1000157-10-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j721e-common-proc-board: Define aliases at board levelNishanth Menon
Define the aliases at the board level instead of using generic aliases at SoC level. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230601183151.1000157-9-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j721e-sk: Define aliases at board levelNishanth Menon
Define the aliases at the board level instead of using generic aliases at SoC level. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230601183151.1000157-8-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j721e-beagleboneai64: Add wakeup_uart pinmuxNishanth Menon
Define the wakeup uart pin-mux for completeness. This allows the device tree usage in bootloader and firmwares that can configure the same appropriately. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230601183151.1000157-7-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eepromNishanth Menon
Enable wakeup_i2c and use un-used pinmux. While at it, describe the board detection eeprom present on the board. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230601183151.1000157-6-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: j721e-common-proc-board: Add uart pinmuxNishanth Menon
Explicitly define the pinmux rather than depend on bootloader configured pinmux for the platform. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230601183151.1000157-5-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: j721e-som/common-proc-board: Add product linksNishanth Menon
Add product links to get reference to schematics and design files Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230601183151.1000157-4-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j721e-sk: Enable wakeup_i2c0 and eepromNishanth Menon
Enable wakeup_i2c and use un-used pinmux. While at it, describe the board detection eeprom present on the board. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230601183151.1000157-3-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j721e-sk: Add missing uart pinmuxesNishanth Menon
Rather than depend on the default pinmuxes, explicitly describe the pinmux Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230601183151.1000157-2-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-am64: Use phandle to stdout UART nodeAndrew Davis
Using a phandle makes it clear which UART we are choosing without needing to resolve through an alias first. Especially useful for boards like the TI J721s2-EVM where the alias is "serial2" but it actually resolves to the 8th UART instance(main_uart8). Signed-off-by: Andrew Davis <afd@ti.com> Link: https://lore.kernel.org/r/20230601184933.358731-2-afd@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
generated by cgit (git 2.34.1) at 2025-09-11 06:21:09 +0000