| Age | Commit message (Collapse) | Author |
|---|
|
An incorrect address mask is being used in the qi_flush_dev_iotlb_pasid()
to check the address alignment. This leads to a lot of spurious kernel
warnings:
[ 485.837093] DMAR: Invalidate non-aligned address 7f76f47f9000, order 0
[ 485.837098] DMAR: Invalidate non-aligned address 7f76f47f9000, order 0
[ 492.494145] qi_flush_dev_iotlb_pasid: 5734 callbacks suppressed
[ 492.494147] DMAR: Invalidate non-aligned address 7f7728800000, order 11
[ 492.508965] DMAR: Invalidate non-aligned address 7f7728800000, order 11
Fix it by checking the alignment in right way.
Fixes: 288d08e780088 ("iommu/vt-d: Handle non-page aligned address")
Reported-and-tested-by: Guo Kaijie <Kaijie.Guo@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20210119043500.1539596-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
IOMMU Extended Feature Register (EFR) is used to communicate
the supported features for each IOMMU to the IOMMU driver.
This is normally read from the PCI MMIO register offset 0x30,
and used by the iommu_feature() helper function.
However, there are certain scenarios where the information is needed
prior to PCI initialization, and the iommu_feature() function is used
prematurely w/o warning. This has caused incorrect initialization of IOMMU.
This is the case for the commit 6d39bdee238f ("iommu/amd: Enforce 4k
mapping for certain IOMMU data structures")
Since, the EFR is also available in the IVHD header, and is available to
the driver prior to PCI initialization. Therefore, default to using
the IVHD EFR instead.
Fixes: 6d39bdee238f ("iommu/amd: Enforce 4k mapping for certain IOMMU data structures")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20210120135002.2682-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Later variants of the rkisp1 block use more entries in some arrays:
RKISP1_CIF_ISP_AE_MEAN_MAX 25 -> 81
RKISP1_CIF_ISP_HIST_BIN_N_MAX 16 -> 32
RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES 17 -> 34
RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE 25 -> 81
and we can still extend the uapi during the 5.11-rc cycle, so do that
now to be on the safe side.
V10 and V11 only need the smaller sizes, while V12 and V13 needed
the larger sizes.
When adding the bigger sizes make sure, values filled from hardware
values and transmitted to userspace don't leak kernel data by zeroing
them beforehand.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The IP block evolved from its rk3288/rk3399 base and the vendor
designates them with a numerical version. rk3399 for example
is designated V10 probably meaning V1.0.
There doesn't seem to be an actual version register we could read that
information from, so allow the match_data to carry that information
for future differentiation.
Also carry that information in the hw_revision field of the media-
controller API, so that userspace also has access to that.
The added versions are:
- V10: at least rk3288 + rk3399
- V11: seemingly unused as of now, but probably appeared in some soc
- V12: at least rk3326 + px30
- V13: at least rk1808
[fix checkpatch warning don't use multiple blank lines]
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The uapi right now specifies an array size of 28 but the actual number
of elements is only 25 with the last 3 being unused.
Reduce the array size to the correct number of elements and change
the params code to iterate the array 25 times.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
hist_bins is an array of type __u32. Each entry represents
a 20 bit value. So mask out the unused bits.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
hist_bins is an array of type __u32. Each entry represent
a 20 bit fixed point value as documented inline.
The cast to u8 when setting the values is wrong. Remove it.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Each entry in the array is a 20 bits value composed of 16 bits unsigned
integer and 4 bits fractional part. So the type should change to __u32.
In addition add a documentation of how the measurements are done.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Some i2c device driver indirectly uses I2C driver when it is now
being suspended. The i2c devices driver is suspended during the
NOIRQ phase and this cannot be changed due to other dependencies.
Therefore, we also need to move the suspend handling for the I2C
controller driver to the NOIRQ phase as well.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Fix a memory leak in mt76_add_fragment routine returning the buffer
to the page_frag_cache when we receive a new fragment and the
skb_shared_info frag array is full.
Fixes: b102f0c522cf6 ("mt76: fix array overflow on receiving too many fragments for a packet")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/4f9dd73407da88b2a552517ce8db242d86bf4d5c.1611616130.git.lorenzo@kernel.org
|
|
When CONFIG_ATH9K is built-in but LED support is in a loadable
module, both ath9k drivers fails to link:
x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_deinit_leds':
gpio.c:(.text+0x36): undefined reference to `led_classdev_unregister'
x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_init_leds':
gpio.c:(.text+0x179): undefined reference to `led_classdev_register_ext'
The problem is that the 'imply' keyword does not enforce any dependency
but is only a weak hint to Kconfig to enable another symbol from a
defconfig file.
Change imply to a 'depends on LEDS_CLASS' that prevents the incorrect
configuration but still allows building the driver without LED support.
The 'select MAC80211_LEDS' is now ensures that the LED support is
actually used if it is present, and the added Kconfig dependency
on MAC80211_LEDS ensures that it cannot be enabled manually when it
has no effect.
Fixes: 197f466e93f5 ("ath9k_htc: Do not select MAC80211_LEDS by default")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210125113654.2408057-1-arnd@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-01-26
This series introduces some fixes to mlx5 driver.
* tag 'mlx5-fixes-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable
net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset
net/mlx5e: Revert parameters on errors when changing trust state without reset
net/mlx5e: Correctly handle changing the number of queues when the interface is down
net/mlx5e: Fix CT rule + encap slow path offload and deletion
net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled
net/mlx5: Maintain separate page trees for ECPF and PF functions
net/mlx5e: Fix IPSEC stats
net/mlx5e: Reduce tc unsupported key print level
net/mlx5e: free page before return
net/mlx5e: E-switch, Fix rate calculation for overflow
net/mlx5: Fix memory leak on flow table creation error flow
====================
Link: https://lore.kernel.org/r/20210126234345.202096-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure that received Command-Response Queue (CRQ) entries are
properly read in order by the driver. dma_rmb barrier has
been added before accessing the CRQ descriptor to ensure
the entire descriptor is read before processing.
Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20210128013442.88319-1-ljp@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Honor stateful expressions defined in the set from the dynset
extension. The set definition provides a stateful expression
that must be used by the dynset expression in case it is specified.
2) Missing timeout extension in the set element in the dynset
extension leads to inconsistent ruleset listing, not allowing
the user to restore timeout and expiration on ruleset reload.
3) Do not dump the stateful expression from the dynset extension
if it coming from the set definition.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nft_dynset: dump expressions when set definition contains no expressions
netfilter: nft_dynset: add timeout extension to template
netfilter: nft_dynset: honor stateful expressions in set definition
====================
Link: https://lore.kernel.org/r/20210127132512.5472-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2021-01-27
The patch is by Dan Carpenter and fixes a potential information leak in
can_fill_info().
* tag 'linux-can-fixes-for-5.11-20210127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: dev: prevent potential information leak in can_fill_info()
====================
Link: https://lore.kernel.org/r/20210127094028.2778793-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
include/net/bonding.h is missing from bonding entry.
Link: https://lore.kernel.org/r/20210127021844.4071706-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Anthony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-01-26
This series contains updates to the ice, i40e, and igc driver.
Henry corrects setting an unspecified protocol to IPPROTO_NONE instead of
0 for IPv6 flexbytes filters for ice.
Nick fixes the IPv6 extension header being processed incorrectly and
updates the netdev->dev_addr if it exists in hardware as it may have been
modified outside the ice driver.
Brett ensures a user cannot request more channels than available LAN MSI-X
and fixes the minimum allocation logic as it was incorrectly trying to use
more MSI-X than allocated for ice.
Stefan Assmann minimizes the delay between getting and using the VSI
pointer to prevent a possible crash for i40e.
Corinna Vinschen fixes link speed advertising for igc.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: fix link speed advertising
i40e: acquire VSI pointer only after VF is initialized
ice: Fix MSI-X vector fallback logic
ice: Don't allow more channels than LAN MSI-X available
ice: update dev_addr in ice_set_mac_address even if HW filter exists
ice: Implement flow for IPv6 next header (extension header)
ice: fix FDir IPv6 flexbyte
====================
Link: https://lore.kernel.org/r/20210126221035.658124-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On building the route there is an assumption that the destination
could be local. In this case loopback_dev is used to get the address.
If the address is still cannot be retrieved dn_route_output_slow
returns EADDRNOTAVAIL with loopback_dev reference taken.
Cannot find hash for the fixes tag because this code was introduced
long time ago. I don't think that this bug has ever fired but the
patch is done just to have a consistent code base.
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/1611619334-20955-1-git-send-email-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's not true that switchdev_port_obj_notify() only inspects the
->handled field of "struct switchdev_notifier_port_obj_info" if
call_switchdev_blocking_notifiers() returns 0 - there's a WARN_ON()
triggering for a non-zero return combined with ->handled not being
true. But the real problem here is that -EOPNOTSUPP is not being
properly handled.
The wrapper functions switchdev_handle_port_obj_add() et al change a
return value of -EOPNOTSUPP to 0, and the treatment of ->handled in
switchdev_port_obj_notify() seems to be designed to change that back
to -EOPNOTSUPP in case nobody actually acted on the notifier (i.e.,
everybody returned -EOPNOTSUPP).
Currently, as soon as some device down the stack passes the check_cb()
check, ->handled gets set to true, which means that
switchdev_port_obj_notify() cannot actually ever return -EOPNOTSUPP.
This, for example, means that the detection of hardware offload
support in the MRP code is broken: switchdev_port_obj_add() used by
br_mrp_switchdev_send_ring_test() always returns 0, so since the MRP
code thinks the generation of MRP test frames has been offloaded, no
such frames are actually put on the wire. Similarly,
br_mrp_switchdev_set_ring_role() also always returns 0, causing
mrp->ring_role_offloaded to be set to 1.
To fix this, continue to set ->handled true if any callback returns
success or any error distinct from -EOPNOTSUPP. But if all the
callbacks return -EOPNOTSUPP, make sure that ->handled stays false, so
the logic in switchdev_port_obj_notify() can propagate that
information.
Fixes: 9a9f26e8f7ea ("bridge: mrp: Connect MRP API with the switchdev API")
Fixes: f30f0601eb93 ("switchdev: Add helpers to aid traversal through lower devices")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Link: https://lore.kernel.org/r/20210125124116.102928-1-rasmus.villemoes@prevas.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit e0d072782c73 ("dma-mapping: introduce DMA range map,
supplanting dma_pfn_offset") always update dma_range_map even though it was
already set, like in the sunxi_mbus driver. the issue is reported at [1].
This patch avoid this(Updating it only when dev has valid dma-ranges).
Meanwhile, dma_range_map contains the devices' dma_ranges information,
This patch moves dma_range_map before of_iommu_configure. The iommu
driver may need to know the dma_address requirements of its iommu
consumer devices.
[1] https://lore.kernel.org/linux-arm-kernel/5c7946f3-b56e-da00-a750-be097c7ceb32@arm.com/
CC: Frank Rowand <frowand.list@gmail.com>
Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset"),
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210119105203.15530-1-yong.wu@mediatek.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Two small fixes:
- Fix linking error with 64-bit kernel when modules are disabled,
reported by kernel test robot
- Remove leftover reference to power_tasklet, by Davidlohr Bueso"
* 'parisc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Enable -mlong-calls gcc option by default when !CONFIG_MODULES
parisc: Remove leftover reference to the power_tasklet
|
|
if dma_map_single() fails, kernel will give the below oops since
task_struct has been destroyed and we are running into the memory
corruption due to use-after-free in kthread_stop():
[ 48.095310] Unable to handle kernel paging request at virtual address 000000c473548040
[ 48.095736] Mem abort info:
[ 48.095864] ESR = 0x96000004
[ 48.096025] EC = 0x25: DABT (current EL), IL = 32 bits
[ 48.096268] SET = 0, FnV = 0
[ 48.096401] EA = 0, S1PTW = 0
[ 48.096538] Data abort info:
[ 48.096659] ISV = 0, ISS = 0x00000004
[ 48.096820] CM = 0, WnR = 0
[ 48.097079] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104639000
[ 48.098099] [000000c473548040] pgd=0000000000000000, p4d=0000000000000000
[ 48.098832] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 48.099232] Modules linked in:
[ 48.099387] CPU: 0 PID: 2 Comm: kthreadd Tainted: G W
[ 48.099887] Hardware name: linux,dummy-virt (DT)
[ 48.100078] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[ 48.100516] pc : __kmalloc_node+0x214/0x368
[ 48.100944] lr : __kmalloc_node+0x1f4/0x368
[ 48.101458] sp : ffff800011f0bb80
[ 48.101843] x29: ffff800011f0bb80 x28: ffff0000c0098ec0
[ 48.102330] x27: 0000000000000000 x26: 00000000001d4600
[ 48.102648] x25: ffff0000c0098ec0 x24: ffff800011b6a000
[ 48.102988] x23: 00000000ffffffff x22: ffff0000c0098ec0
[ 48.103333] x21: ffff8000101d7a54 x20: 0000000000000dc0
[ 48.103657] x19: ffff0000c0001e00 x18: 0000000000000000
[ 48.104069] x17: 0000000000000000 x16: 0000000000000000
[ 48.105449] x15: 000001aa0304e7b9 x14: 00000000000003b1
[ 48.106401] x13: ffff8000122d5000 x12: ffff80001228d000
[ 48.107296] x11: ffff0000c0154340 x10: 0000000000000000
[ 48.107862] x9 : ffff80000fffffff x8 : ffff0000c473527f
[ 48.108326] x7 : ffff800011e62f58 x6 : ffff0000c01c8ed8
[ 48.108778] x5 : ffff0000c0098ec0 x4 : 0000000000000000
[ 48.109223] x3 : 00000000001d4600 x2 : 0000000000000040
[ 48.109656] x1 : 0000000000000001 x0 : ff0000c473548000
[ 48.110104] Call trace:
[ 48.110287] __kmalloc_node+0x214/0x368
[ 48.110493] __vmalloc_node_range+0xc4/0x298
[ 48.110805] copy_process+0x2c8/0x15c8
[ 48.111133] kernel_clone+0x5c/0x3c0
[ 48.111373] kernel_thread+0x64/0x90
[ 48.111604] kthreadd+0x158/0x368
[ 48.111810] ret_from_fork+0x10/0x30
[ 48.112336] Code: 17ffffe9 b9402a62 b94008a1 11000421 (f8626802)
[ 48.112884] ---[ end trace d4890e21e75419d5 ]---
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Abaci reported the follow warning:
[ 27.073425] do not call blocking ops when !TASK_RUNNING; state=1 set at [] prepare_to_wait_exclusive+0x3a/0xc0
[ 27.075805] WARNING: CPU: 0 PID: 951 at kernel/sched/core.c:7853 __might_sleep+0x80/0xa0
[ 27.077604] Modules linked in:
[ 27.078379] CPU: 0 PID: 951 Comm: a.out Not tainted 5.11.0-rc3+ #1
[ 27.079637] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 27.080852] RIP: 0010:__might_sleep+0x80/0xa0
[ 27.081835] Code: 65 48 8b 04 25 80 71 01 00 48 8b 90 c0 15 00 00 48 8b 70 18 48 c7 c7 08 39 95 82 c6 05 f9 5f de 08 01 48 89 d1 e8 00 c6 fa ff 0b eb bf 41 0f b6 f5 48 c7 c7 40 23 c9 82 e8 f3 48 ec 00 eb a7
[ 27.084521] RSP: 0018:ffffc90000fe3ce8 EFLAGS: 00010286
[ 27.085350] RAX: 0000000000000000 RBX: ffffffff82956083 RCX: 0000000000000000
[ 27.086348] RDX: ffff8881057a0000 RSI: ffffffff8118cc9e RDI: ffff88813bc28570
[ 27.087598] RBP: 00000000000003a7 R08: 0000000000000001 R09: 0000000000000001
[ 27.088819] R10: ffffc90000fe3e00 R11: 00000000fffef9f0 R12: 0000000000000000
[ 27.089819] R13: 0000000000000000 R14: ffff88810576eb80 R15: ffff88810576e800
[ 27.091058] FS: 00007f7b144cf740(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
[ 27.092775] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 27.093796] CR2: 00000000022da7b8 CR3: 000000010b928002 CR4: 00000000003706f0
[ 27.094778] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 27.095780] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 27.097011] Call Trace:
[ 27.097685] __mutex_lock+0x5d/0xa30
[ 27.098565] ? prepare_to_wait_exclusive+0x71/0xc0
[ 27.099412] ? io_cqring_overflow_flush.part.101+0x6d/0x70
[ 27.100441] ? lockdep_hardirqs_on_prepare+0xe9/0x1c0
[ 27.101537] ? _raw_spin_unlock_irqrestore+0x2d/0x40
[ 27.102656] ? trace_hardirqs_on+0x46/0x110
[ 27.103459] ? io_cqring_overflow_flush.part.101+0x6d/0x70
[ 27.104317] io_cqring_overflow_flush.part.101+0x6d/0x70
[ 27.105113] io_cqring_wait+0x36e/0x4d0
[ 27.105770] ? find_held_lock+0x28/0xb0
[ 27.106370] ? io_uring_remove_task_files+0xa0/0xa0
[ 27.107076] __x64_sys_io_uring_enter+0x4fb/0x640
[ 27.107801] ? rcu_read_lock_sched_held+0x59/0xa0
[ 27.108562] ? lockdep_hardirqs_on_prepare+0xe9/0x1c0
[ 27.109684] ? syscall_enter_from_user_mode+0x26/0x70
[ 27.110731] do_syscall_64+0x2d/0x40
[ 27.111296] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 27.112056] RIP: 0033:0x7f7b13dc8239
[ 27.112663] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 ec 2c 00 f7 d8 64 89 01 48
[ 27.115113] RSP: 002b:00007ffd6d7f5c88 EFLAGS: 00000286 ORIG_RAX: 00000000000001aa
[ 27.116562] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7b13dc8239
[ 27.117961] RDX: 000000000000478e RSI: 0000000000000000 RDI: 0000000000000003
[ 27.118925] RBP: 00007ffd6d7f5cb0 R08: 0000000020000040 R09: 0000000000000008
[ 27.119773] R10: 0000000000000001 R11: 0000000000000286 R12: 0000000000400480
[ 27.120614] R13: 00007ffd6d7f5d90 R14: 0000000000000000 R15: 0000000000000000
[ 27.121490] irq event stamp: 5635
[ 27.121946] hardirqs last enabled at (5643): [] console_unlock+0x5c4/0x740
[ 27.123476] hardirqs last disabled at (5652): [] console_unlock+0x4e7/0x740
[ 27.125192] softirqs last enabled at (5272): [] __do_softirq+0x3c5/0x5aa
[ 27.126430] softirqs last disabled at (5267): [] asm_call_irq_on_stack+0xf/0x20
[ 27.127634] ---[ end trace 289d7e28fa60f928 ]---
This is caused by calling io_cqring_overflow_flush() which may sleep
after calling prepare_to_wait_exclusive() which set task state to
TASK_INTERRUPTIBLE
Reported-by: Abaci <abaci@linux.alibaba.com>
Fixes: 6c503150ae33 ("io_uring: patch up IOPOLL overflow_flush sync")
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The cited commit introduced a serious regression with SATA write speed,
as found by bisecting. This patch reverts this commit, which restores
write speed back to the values observed before this commit.
The performance tests were done on a Helios4 NAS (2nd batch) with 4 HDDs
(WD8003FFBX) using dd (bs=1M count=2000). "Direct" is a test with a
single HDD, the rest are different RAID levels built over the first
partitions of 4 HDDs. Test results are in MB/s, R is read, W is write.
| Direct | RAID0 | RAID10 f2 | RAID10 n2 | RAID6
----------------+--------+-------+-----------+-----------+--------
9011495c9466 | R:256 | R:313 | R:276 | R:313 | R:323
(before faulty) | W:254 | W:253 | W:195 | W:204 | W:117
----------------+--------+-------+-----------+-----------+--------
5ff9f19231a0 | R:257 | R:398 | R:312 | R:344 | R:391
(faulty commit) | W:154 | W:122 | W:67.7 | W:66.6 | W:67.2
----------------+--------+-------+-----------+-----------+--------
5.10.10 | R:256 | R:401 | R:312 | R:356 | R:375
unpatched | W:149 | W:123 | W:64 | W:64.1 | W:61.5
----------------+--------+-------+-----------+-----------+--------
5.10.10 | R:255 | R:396 | R:312 | R:340 | R:393
patched | W:247 | W:274 | W:220 | W:225 | W:121
Applying this patch doesn't hurt read performance, while improves the
write speed by 1.5x - 3.5x (more impact on RAID tests). The write speed
is restored back to the state before the faulty commit, and even a bit
higher in RAID tests (which aren't HDD-bound on this device) - that is
likely related to other optimizations done between the faulty commit and
5.10.10 which also improved the read speed.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Fixes: 5ff9f19231a0 ("block: simplify set_init_blocksize")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When booting a kernel which has been built with CONFIG_AMD_MEM_ENCRYPT
enabled as a Xen pv guest a warning is issued for each processor:
[ 5.964347] ------------[ cut here ]------------
[ 5.968314] WARNING: CPU: 0 PID: 1 at /home/gross/linux/head/arch/x86/xen/enlighten_pv.c:660 get_trap_addr+0x59/0x90
[ 5.972321] Modules linked in:
[ 5.976313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.11.0-rc5-default #75
[ 5.980313] Hardware name: Dell Inc. OptiPlex 9020/0PC5F7, BIOS A05 12/05/2013
[ 5.984313] RIP: e030:get_trap_addr+0x59/0x90
[ 5.988313] Code: 42 10 83 f0 01 85 f6 74 04 84 c0 75 1d b8 01 00 00 00 c3 48 3d 00 80 83 82 72 08 48 3d 20 81 83 82 72 0c b8 01 00 00 00 eb db <0f> 0b 31 c0 c3 48 2d 00 80 83 82 48 ba 72 1c c7 71 1c c7 71 1c 48
[ 5.992313] RSP: e02b:ffffc90040033d38 EFLAGS: 00010202
[ 5.996313] RAX: 0000000000000001 RBX: ffffffff82a141d0 RCX: ffffffff8222ec38
[ 6.000312] RDX: ffffffff8222ec38 RSI: 0000000000000005 RDI: ffffc90040033d40
[ 6.004313] RBP: ffff8881003984a0 R08: 0000000000000007 R09: ffff888100398000
[ 6.008312] R10: 0000000000000007 R11: ffffc90040246000 R12: ffff8884082182a8
[ 6.012313] R13: 0000000000000100 R14: 000000000000001d R15: ffff8881003982d0
[ 6.016316] FS: 0000000000000000(0000) GS:ffff888408200000(0000) knlGS:0000000000000000
[ 6.020313] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.024313] CR2: ffffc900020ef000 CR3: 000000000220a000 CR4: 0000000000050660
[ 6.028314] Call Trace:
[ 6.032313] cvt_gate_to_trap.part.7+0x3f/0x90
[ 6.036313] ? asm_exc_double_fault+0x30/0x30
[ 6.040313] xen_convert_trap_info+0x87/0xd0
[ 6.044313] xen_pv_cpu_up+0x17a/0x450
[ 6.048313] bringup_cpu+0x2b/0xc0
[ 6.052313] ? cpus_read_trylock+0x50/0x50
[ 6.056313] cpuhp_invoke_callback+0x80/0x4c0
[ 6.060313] _cpu_up+0xa7/0x140
[ 6.064313] cpu_up+0x98/0xd0
[ 6.068313] bringup_nonboot_cpus+0x4f/0x60
[ 6.072313] smp_init+0x26/0x79
[ 6.076313] kernel_init_freeable+0x103/0x258
[ 6.080313] ? rest_init+0xd0/0xd0
[ 6.084313] kernel_init+0xa/0x110
[ 6.088313] ret_from_fork+0x1f/0x30
[ 6.092313] ---[ end trace be9ecf17dceeb4f3 ]---
Reason is that there is no Xen pv trap entry for X86_TRAP_VC.
Fix that by adding a generic trap handler for unknown traps and wire all
unknown bare metal handlers to this generic handler, which will just
crash the system in case such a trap will ever happen.
Fixes: 0786138c78e793 ("x86/sev-es: Add a Runtime #VC Exception Handler")
Cc: <stable@vger.kernel.org> # v5.10
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Address issue observed on real world system with suboptimal IORT table
where DMA masks of PCI devices would get set to 0 as result.
iort_dma_setup() would query the root complex'/named component IORT
entry for a DMA mask, and use that over the one the device has been
configured with earlier.
Ideally we want to use the minimum mask of what the IORT contains for
the root complex and what the device was configured with.
Fixes: 5ac65e8c8941 ("ACPI/IORT: Support address size limit for root complexes")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20210122012419.95010-1-mdf@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The number reported by the query is N-1 and I think people reading the
sysfs file would expect N instead. For users creating VMs there's no
actual difference because KVM's limit is currently below the UV's
limit.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: a0f60f8431999 ("s390/protvirt: Add sysfs firmware interface for Ultravisor information")
Cc: stable@vger.kernel.org
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The queues assigned to a matrix mediated device are currently reset when:
* The VFIO_DEVICE_RESET ioctl is invoked
* The mdev fd is closed by userspace (QEMU)
* The mdev is removed from sysfs.
Immediately after the reset of a queue, a call is made to disable
interrupts for the queue. This is entirely unnecessary because the reset of
a queue disables interrupts, so this will be removed.
Furthermore, vfio_ap_irq_disable() does an unconditional PQAP/AQIC which
can result in a specification exception (when the corresponding facility
is not available), so this is actually a bugfix.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
[pasic@linux.ibm.com: minor rework before merging]
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: ec89b55e3bce ("s390: ap: implement PAPQ AQIC interception in kernel")
Cc: <stable@vger.kernel.org>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The vfio_ap device driver registers a group notifier with VFIO when the
file descriptor for a VFIO mediated device for a KVM guest is opened to
receive notification that the KVM pointer is set (VFIO_GROUP_NOTIFY_SET_KVM
event). When the KVM pointer is set, the vfio_ap driver takes the
following actions:
1. Stashes the KVM pointer in the vfio_ap_mdev struct that holds the state
of the mediated device.
2. Calls the kvm_get_kvm() function to increment its reference counter.
3. Sets the function pointer to the function that handles interception of
the instruction that enables/disables interrupt processing.
4. Sets the masks in the KVM guest's CRYCB to pass AP resources through to
the guest.
In order to avoid memory leaks, when the notifier is called to receive
notification that the KVM pointer has been set to NULL, the vfio_ap device
driver should reverse the actions taken when the KVM pointer was set.
Fixes: 258287c994de ("s390: vfio-ap: implement mediated device open callback")
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201223012013.5418-1-akrowiak@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The "bec" struct isn't necessarily always initialized. For example, the
mcp251xfd_get_berr_counter() function doesn't initialize anything if the
interface is down.
Fixes: 52c793f24054 ("can: netlink support for bus-error reporting and counters")
Link: https://lore.kernel.org/r/YAkaRdRJncsJO8Ve@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The recent fix for handling the UIP bit unearthed another issue in the RTC
code. If the RTC is advertised but the readout is straight 0xFF because
it's not available, the old code just proceeded with crappy values, but the
new code hangs because it waits for the UIP bit to become low.
Add a sanity check in the RTC CMOS probe function which reads the RTC_VALID
register (Register D) which should have bit 0-6 cleared. If that's not the
case then fail to register the CMOS.
Add the same check to mc146818_get_time(), warn once when the condition
is true and invalidate the rtc_time data.
Reported-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mickaël Salaün <mic@linux.microsoft.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/87tur3fx7w.fsf@nanos.tec.linutronix.de
|
|
In commit 3499ba8198ca ("xen: Fix event channel callback via INTX/GSI")
I reworked the triggering of xenbus_probe().
I tried to simplify things by taking out the workqueue based startup
triggered from wake_waiting(); the somewhat poorly named xenbus IRQ
handler.
I missed the fact that in the XS_LOCAL case (Dom0 starting its own
xenstored or xenstore-stubdom, which happens after the kernel is booted
completely), that IRQ-based trigger is still actually needed.
So... put it back, except more cleanly. By just spawning a xenbus_probe
thread which waits on xb_waitq and runs the probe the first time it
gets woken, just as the workqueue-based hack did.
This is actually a nicer approach for *all* the back ends with different
interrupt methods, and we can switch them all over to that without the
complex conditions for when to trigger it. But not in -rc6. This is
the minimal fix for the regression, although it's a step in the right
direction instead of doing a partial revert and actually putting the
workqueue back. It's also simpler than the workqueue.
Fixes: 3499ba8198ca ("xen: Fix event channel callback via INTX/GSI")
Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/4c9af052a6e0f6485d1de43f2c38b1461996db99.camel@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Joseph reports following deadlock:
CPU0:
...
io_kill_linked_timeout // &ctx->completion_lock
io_commit_cqring
__io_queue_deferred
__io_queue_async_work
io_wq_enqueue
io_wqe_enqueue // &wqe->lock
CPU1:
...
__io_uring_files_cancel
io_wq_cancel_cb
io_wqe_cancel_pending_work // &wqe->lock
io_cancel_task_cb // &ctx->completion_lock
Only __io_queue_deferred() calls queue_async_work() while holding
ctx->completion_lock, enqueue drained requests via io_req_task_queue()
instead.
Cc: stable@vger.kernel.org # 5.9+
Reported-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Laurent Badel says:
====================
net: fec: Fix temporary RMII clock reset on link up
v2: fixed a compilation warning
The FEC drivers performs a "hardware reset" of the MAC module when the
link is reported to be up. This causes a short glitch in the RMII clock
due to the hardware reset clearing the receive control register which
controls the MII mode. It seems that some link partners do not tolerate
this glitch, and invalidate the link, which leads to a never-ending loop
of negotiation-link up-link down events.
This was observed with the iMX28 Soc and LAN8720/LAN8742 PHYs, with two
Intel adapters I218-LM and X722-DA2 as link partners, though a number of
other link partners do not seem to mind the clock glitch. Changing the
hardware reset to a software reset (clearing bit 1 of the ECR register)
cured the issue.
Attempts to optimize fec_restart() in order to minimize the duration of
the glitch were unsuccessful. Furthermore manually producing the glitch by
setting MII mode and then back to RMII in two consecutive instructions,
resulting in a clock glitch <10us in duration, was enough to cause the
partner to invalidate the link. This strongly suggests that the root cause
of the link being dropped is indeed the change in clock frequency.
In an effort to minimize changes to driver, the patch proposes to use
soft reset only for tested SoCs (iMX28) and only if the link is up. This
preserves hardware reset in other situations, which might be required for
proper setup of the MAC.
====================
Link: https://lore.kernel.org/r/20210125100745.5090-1-laurentbadel@eaton.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
fec_restart() does a hard reset of the MAC module when the link status
changes to up. This temporarily resets the R_CNTRL register which controls
the MII mode of the ENET_OUT clock. In the case of RMII, the clock
frequency momentarily drops from 50MHz to 25MHz until the register is
reconfigured. Some link partners do not tolerate this glitch and
invalidate the link causing failure to establish a stable link when using
PHY polling mode. Since as per IEEE802.3 the criteria for link validity
are PHY-specific, what the partner should tolerate cannot be assumed, so
avoid resetting the MII clock by using software reset instead of hardware
reset when the link is up. This is generally relevant only if the SoC
provides the clock to an external PHY and the PHY is configured for RMII.
Signed-off-by: Laurent Badel <laurentbadel@eaton.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the lapb module, the timers may run concurrently with other code in
this module, and there is currently no locking to prevent the code from
racing on "struct lapb_cb". This patch adds locking to prevent racing.
1. Add "spinlock_t lock" to "struct lapb_cb"; Add "spin_lock_bh" and
"spin_unlock_bh" to APIs, timer functions and notifier functions.
2. Add "bool t1timer_stop, t2timer_stop" to "struct lapb_cb" to make us
able to ask running timers to abort; Modify "lapb_stop_t1timer" and
"lapb_stop_t2timer" to make them able to abort running timers;
Modify "lapb_t2timer_expiry" and "lapb_t1timer_expiry" to make them
abort after they are stopped by "lapb_stop_t1timer", "lapb_stop_t2timer",
and "lapb_start_t1timer", "lapb_start_t2timer".
3. Let lapb_unregister wait for other API functions and running timers
to stop.
4. The lapb_device_event function calls lapb_disconnect_request. In
order to avoid trying to hold the lock twice, add a new function named
"__lapb_disconnect_request" which assumes the lock is held, and make
it called by lapb_disconnect_request and lapb_device_event.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20210126040939.69995-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 7536c7e03e74 ("of/fdt: Remove redundant kbasename function
call") exposed a bug creating DT nodes in the ATAGS to DT fixup code.
Non-existent nodes would mistaken get created with a leading '/'. The
problem was fdt_path_offset() takes a full path while creating a node
with fdt_add_subnode() takes just the basename.
Since this we only add root child nodes, we can just skip over the '/'.
Fixes: 7536c7e03e74 ("of/fdt: Remove redundant kbasename function call")
Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Qi Zheng <arch0.zheng@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210126023905.1631161-1-robh@kernel.org
|
|
Function __team_compute_features() is protected by team->lock
mutex when it is called from team_compute_features() used when
features of an underlying device is changed. This causes
a deadlock when NETDEV_FEAT_CHANGE notifier for underlying device
is fired due to change propagated from team driver (e.g. MTU
change). It's because callbacks like team_change_mtu() or
team_vlan_rx_{add,del}_vid() protect their port list traversal
by team->lock mutex.
Example (r8169 case where this driver disables TSO for certain MTU
values):
...
[ 6391.348202] __mutex_lock.isra.6+0x2d0/0x4a0
[ 6391.358602] team_device_event+0x9d/0x160 [team]
[ 6391.363756] notifier_call_chain+0x47/0x70
[ 6391.368329] netdev_update_features+0x56/0x60
[ 6391.373207] rtl8169_change_mtu+0x14/0x50 [r8169]
[ 6391.378457] dev_set_mtu_ext+0xe1/0x1d0
[ 6391.387022] dev_set_mtu+0x52/0x90
[ 6391.390820] team_change_mtu+0x64/0xf0 [team]
[ 6391.395683] dev_set_mtu_ext+0xe1/0x1d0
[ 6391.399963] do_setlink+0x231/0xf50
...
In fact team_compute_features() called from team_device_event()
does not need to be protected by team->lock mutex and rcu_read_lock()
is sufficient there for port list traversal.
Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20210125074416.4056484-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
David has been the de-facto maintainer for much of the IP code
for the last couple of years, let's make it official.
Link: https://lore.kernel.org/r/20210122173220.3579491-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a non nat tuple entry is inserted just to the regular tuples
rhashtable (ct_tuples_ht) and not to natted tuples rhashtable
(ct_nat_tuples_ht). Commit bc562be9674b ("net/mlx5e: CT: Save ct entries
tuples in hashtables") mixed up the return labels and names sot that on
cleanup or failure we still try to remove for the natted tuples rhashtable.
Fix that by correctly checking if a natted tuples insertion
before removing it. While here make it more readable.
Fixes: bc562be9674b ("net/mlx5e: CT: Save ct entries tuples in hashtables")
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
without reset
Sometimes, channel params are changed without recreating the channels.
It happens in two basic cases: when the channels are closed, and when
the parameter being changed doesn't affect how channels are configured.
Such changes invoke a hardware command that might fail. The whole
operation should be reverted in such cases, but the code that restores
the parameters' values in the driver was missing. This commit adds this
handling.
Fixes: 2e20a151205b ("net/mlx5e: Fail safe mtu and lro setting")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Trust state may be changed without recreating the channels. It happens
when the channels are closed, and when channel parameters (min inline
mode) stay the same after changing the trust state. Changing the trust
state is a hardware command that may fail. The current code didn't
restore the channel parameters to their old values if an error happened
and the channels were closed. This commit adds handling for this case.
Fixes: 6e0504c69811 ("net/mlx5e: Change inline mode correctly when changing trust state")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
is down
This commit addresses two issues related to changing the number of
queues when the channels are closed:
1. Missing call to mlx5e_num_channels_changed to update
real_num_tx_queues when the number of TCs is changed.
2. When mlx5e_num_channels_changed returns an error, the channel
parameters must be reverted.
Two Fixes: tags correspond to the first commits where these two issues
were introduced.
Fixes: 3909a12e7913 ("net/mlx5e: Fix configuration of XPS cpumasks and netdev queues in corner cases")
Fixes: fa3748775b92 ("net/mlx5e: Handle errors from netif_set_real_num_{tx,rx}_queues")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, if a neighbour isn't valid when offloading tunnel encap rules,
we offload the original match and replace the original action with
"goto slow path" action. For this we use a temporary flow attribute based
on the original flow attribute and then change the action. Flow flags,
which among those is the CT flag, are still shared for the slow path rule
offload, so we end up parsing this flow as a CT + goto slow path rule.
Besides being unnecessary, CT action offload saves extra information in
the passed flow attribute, such as created ct_flow and mod_hdr, which
is lost onces the temporary flow attribute is freed.
When a neigh is updated and is valid, we offload the original CT rule
with original CT action, which again creates a ct_flow and mod_hdr
and saves it in the flow's original attribute. Then we delete the slow
path rule with a temporary flow attribute based on original updated
flow attribute, and we free the relevant ct_flow and mod_hdr.
Then when tc deletes this flow, we try to free the ct_flow and mod_hdr
on the flow's attribute again.
To fix the issue, skip all furture proccesing (CT/Sample/Split rules)
in offload/unoffload of slow path rules.
Call trace:
[ 758.850525] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000218
[ 758.952987] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 758.964170] Modules linked in: act_csum(E) act_pedit(E) act_tunnel_key(E) act_ct(E) nf_flow_table(E) xt_nat(E) ip6table_filter(E) ip6table_nat(E) xt_comment(E) ip6_tables(E) xt_conntrack(E) xt_MASQUERADE(E) nf_conntrack_netlink(E) xt_addrtype(E) iptable_filter(E) iptable_nat(E) bpfilter(E) br_netfilter(E) bridge(E) stp(E) llc(E) xfrm_user(E) overlay(E) act_mirred(E) act_skbedit(E) rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) esp6_offload(E) esp6(E) esp4_offload(E) esp4(E) xfrm_algo(E) mlx5_ib(OE) ib_uverbs(OE) geneve(E) ip6_udp_tunnel(E) udp_tunnel(E) nfnetlink_cttimeout(E) nfnetlink(E) mlx5_core(OE) act_gact(E) cls_flower(E) sch_ingress(E) openvswitch(E) nsh(E) nf_conncount(E) nf_nat(E) mlxfw(OE) psample(E) nf_conntrack(E) nf_defrag_ipv4(E) vfio_mdev(E) mdev(E) ib_core(OE) mlx_compat(OE) crct10dif_ce(E) uio_pdrv_genirq(E) uio(E) i2c_mlx(E) mlxbf_pmc(E) sbsa_gwdt(E) mlxbf_gige(E) gpio_mlxbf2(E) mlxbf_pka(E) mlx_trio(E) mlx_bootctl(E) bluefield_edac(E) knem(O)
[ 758.964225] ip_tables(E) mlxbf_tmfifo(E) ipv6(E) crc_ccitt(E) nf_defrag_ipv6(E)
[ 759.154186] CPU: 5 PID: 122 Comm: kworker/u16:1 Tainted: G OE 5.4.60-mlnx.52.gde81e85 #1
[ 759.172870] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:3.5.0-2-gc1b5d64 Jan 4 2021
[ 759.195466] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core]
[ 759.207344] pstate: a0000005 (NzCv daif -PAN -UAO)
[ 759.217003] pc : mlx5_del_flow_rules+0x5c/0x160 [mlx5_core]
[ 759.228229] lr : mlx5_del_flow_rules+0x34/0x160 [mlx5_core]
[ 759.405858] Call trace:
[ 759.410804] mlx5_del_flow_rules+0x5c/0x160 [mlx5_core]
[ 759.421337] __mlx5_eswitch_del_rule.isra.43+0x5c/0x1c8 [mlx5_core]
[ 759.433963] mlx5_eswitch_del_offloaded_rule_ct+0x34/0x40 [mlx5_core]
[ 759.446942] mlx5_tc_rule_delete_ct+0x68/0x74 [mlx5_core]
[ 759.457821] mlx5_tc_ct_delete_flow+0x160/0x21c [mlx5_core]
[ 759.469051] mlx5e_tc_unoffload_fdb_rules+0x158/0x168 [mlx5_core]
[ 759.481325] mlx5e_tc_encap_flows_del+0x140/0x26c [mlx5_core]
[ 759.492901] mlx5e_rep_update_flows+0x11c/0x1ec [mlx5_core]
[ 759.504127] mlx5e_rep_neigh_update+0x160/0x200 [mlx5_core]
[ 759.515314] process_one_work+0x178/0x400
[ 759.523350] worker_thread+0x58/0x3e8
[ 759.530685] kthread+0x100/0x12c
[ 759.537152] ret_from_fork+0x10/0x18
[ 759.544320] Code: 97ffef55 51000673 3100067f 54ffff41 (b9421ab3)
[ 759.556548] ---[ end trace fab818bb1085832d ]---
Fixes: 4c3844d9e97e ("net/mlx5e: CT: Introduce connection tracking")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit introduce new CONFIG_MLX5_CLS_ACT kconfig variable
to control compilation of TC hardware offloads implementation.
When this configuration is disabled the driver is still wrongly
reports in ethtool that hw-tc-offload is supported.
Fixed by reporting hw-tc-offload is supported only when
CONFIG_MLX5_CLS_ACT is enabled.
Fixes: d956873f908c ("net/mlx5e: Introduce kconfig var for TC support")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Pages for the host PF and ECPF were stored in the same tree, so the ECPF
pages were being freed along with the host PF's when the host driver
unloaded.
Combine the function ID and ECPF flag to use as an index into the
x-array containing the trees to get a different tree for the host PF and
ECPF.
Fixes: c6168161f693 ("net/mlx5: Add support for release all pages event")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When IPSEC offload isn't active, the number of stats is not zero, but
the strings are not filled, leading to exposing stats with empty names.
Fix this by using the same condition for NUM_STATS and FILL_STRS.
Fixes: 0aab3e1b04ae ("net/mlx5e: IPSec, Expose IPsec HW stat only for supporting HW")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
"Unsupported key used:" appears in kernel log when flows with
unsupported key are used, arp fields for example.
OpenVSwitch was changed to match on arp fields by default that
caused this warning to appear in kernel log for every arp rule, which
can be a lot.
Fix by lowering print level from warning to debug.
Fixes: e3a2b7ed018e ("net/mlx5e: Support offload cls_flower with drop action")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Instead of directly return, goto the error handling label to free
allocated page.
Fixes: 5f29458b77d5 ("net/mlx5e: Support dump callback in TX reporter")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
rate_bytes_ps is a 64-bit field. It passed as 32-bit field to
apply_police_params(). Due to this when police rate is higher
than 4Gbps, 32-bit calculation ignores the carry. This results
in incorrect rate configurationn the device.
Fix it by performing 64-bit calculation.
Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
