| Age | Commit message (Collapse) | Author |
|---|
|
When the xrx200_hw_receive() function returns -ENOMEM, the NAPI poll
function immediately returns an error.
This is incorrect for two reasons:
* the function terminates without enabling interrupts or scheduling NAPI,
* the error code (-ENOMEM) is returned instead of the number of received
packets.
After the first memory allocation failure occurs, packet reception is
locked due to disabled interrupts from DMA..
Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xrx200_hw_receive() assumes build_skb() always works and goes straight
to skb_reserve(). However, build_skb() can fail under memory pressure.
Add a check in case build_skb() failed to allocate and return NULL.
Fixes: e015593573b3 ("net: lantiq_xrx200: convert to build_skb")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a follow-up to the discussion in [0]. It seems to me that
at least the IP version used on Amlogic SoC's sometimes has a problem
if register MAC_CTRL_REG is written whilst the chip is still processing
a previous write. But that's just a guess.
Adding a delay between two writes to this register helps, but we can
also simply omit the offending second write. This patch uses the second
approach and is based on a suggestion from Qi Duan.
Benefit of this approach is that we can save few register writes, also
on not affected chip versions.
[0] https://www.spinics.net/lists/netdev/msg831526.html
Fixes: bfab27a146ed ("stmmac: add the experimental PCI support")
Suggested-by: Qi Duan <qi.duan@amlogic.com>
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/e99857ce-bd90-5093-ca8c-8cd480b5a0a2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-08-24 (ixgbe, i40e)
This series contains updates to ixgbe and i40e drivers.
Jake stops incorrect resetting of SYSTIME registers when starting
cyclecounter for ixgbe.
Sylwester corrects a check on source IP address when validating destination
for i40e.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Fix incorrect address type for IPv6 flow rules
ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter
====================
Link: https://lore.kernel.org/r/20220824193748.874343-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Shannon Nelson says:
====================
ionic: bug fixes
These are a couple of maintenance bug fixes for the Pensando ionic
networking driver.
Mohamed takes care of a "plays well with others" issue where the
VF spec is a bit vague on VF mac addresses, but certain customers
have come to expect behavior based on other vendor drivers.
Shannon addresses a couple of corner cases seen in internal
stress testing.
====================
Link: https://lore.kernel.org/r/20220824165051.6185-1-snelson@pensando.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Assign a random mac address to the VF interface station
address if it boots with a zero mac address in order to match
similar behavior seen in other VF drivers. Handle the errors
where the older firmware does not allow the VF to set its own
station address.
Newer firmware will allow the VF to set the station mac address
if it hasn't already been set administratively through the PF.
Setting it will also be allowed if the VF has trust.
Fixes: fbb39807e9ae ("ionic: support sr-iov operations")
Signed-off-by: R Mohamed Shah <mohamed@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In looping on FW update tests we occasionally see the
FW_ACTIVATE_STATUS command fail while it is in its EAGAIN loop
waiting for the FW activate step to finsh inside the FW. The
firmware is complaining that the done bit is set when a new
dev_cmd is going to be processed.
Doing a clean on the cmd registers and doorbell before exiting
the wait-for-done and cleaning the done bit before the sleep
prevents this from occurring.
Fixes: fbfb8031533c ("ionic: Add hardware init and device commands")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a case found in heavy testing where a link flap happens just
before a firmware Recovery event and the driver gets stuck in the
BROKEN state. This comes from the driver getting interrupted by a FW
generation change when coming back up from the link flap, and the call
to ionic_start_queues() in ionic_link_status_check() fails. This can be
addressed by having the fw_up code clear the BROKEN bit if seen, rather
than waiting for a user to manually force the interface down and then
back up.
Fixes: 9e8eaf8427b6 ("ionic: stop watchdog when in broken state")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix three bugs in the rxrpc's sendmsg implementation:
(1) rxrpc_new_client_call() should release the socket lock when returning
an error from rxrpc_get_call_slot().
(2) rxrpc_wait_for_tx_window_intr() will return without the call mutex
held in the event that we're interrupted by a signal whilst waiting
for tx space on the socket or relocking the call mutex afterwards.
Fix this by: (a) moving the unlock/lock of the call mutex up to
rxrpc_send_data() such that the lock is not held around all of
rxrpc_wait_for_tx_window*() and (b) indicating to higher callers
whether we're return with the lock dropped. Note that this means
recvmsg() will not block on this call whilst we're waiting.
(3) After dropping and regaining the call mutex, rxrpc_send_data() needs
to go and recheck the state of the tx_pending buffer and the
tx_total_len check in case we raced with another sendmsg() on the same
call.
Thinking on this some more, it might make sense to have different locks for
sendmsg() and recvmsg(). There's probably no need to make recvmsg() wait
for sendmsg(). It does mean that recvmsg() can return MSG_EOR indicating
that a call is dead before a sendmsg() to that call returns - but that can
currently happen anyway.
Without fix (2), something like the following can be induced:
WARNING: bad unlock balance detected!
5.16.0-rc6-syzkaller #0 Not tainted
-------------------------------------
syz-executor011/3597 is trying to release lock (&call->user_mutex) at:
[<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748
but there are no more locks to release!
other info that might help us debug this:
no locks held by syz-executor011/3597.
...
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline]
__lock_release kernel/locking/lockdep.c:5306 [inline]
lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657
__mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900
rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748
rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:724
____sys_sendmsg+0x6e8/0x810 net/socket.c:2409
___sys_sendmsg+0xf3/0x170 net/socket.c:2463
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2492
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
[Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this]
Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Reported-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com
cc: Hawkins Jiawei <yin31149@gmail.com>
cc: Khalid Masum <khalid.masum.92@gmail.com>
cc: Dan Carpenter <dan.carpenter@oracle.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/166135894583.600315.7170979436768124075.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The workflow example code is not working since it got the file names
wrong. So fix this.
Fixes: b18402726bd1 ("Docs/admin-guide/mm/damon/usage: document DAMON sysfs interface")
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Kairui Song <kasong@tencent.com>
Link: https://lore.kernel.org/r/20220823114053.53305-1-ryncsn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
A quick 'grep "5\.x" . -R' on Documentation shows that README.rst,
2.Process.rst and applying-patches.rst all mention the version number "5.x"
for kernel releases.
As the next release will be version 6.0, updating the version number to 6.x
in README.rst seems reasonable.
The description in 2.Process.rst is just a description of recent kernel
releases, it was last updated in the beginning of 2020, and can be
revisited at any time on a regular basis, independent of changing the
version number from 5 to 6. So, there is no need to update this document
now when transitioning from 5.x to 6.x numbering.
The document applying-patches.rst is probably obsolete for most users
anyway, a reader will sufficiently well understand the steps, even it
mentions version 5 rather than version 6. So, do not update that to a
version 6.x numbering scheme.
Update version number from 5.x to 6.x in README.rst only.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220824080836.23087-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The mmVM_L2_CNTL3 register is not assigned an initial value
Signed-off-by: Qu Huang <jinsdb@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable GFX11 MGCG perfmon setting.
V2: set rlc to saft mode before setting.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Correct the isa version for handling KFD test.
Fixes: 7c4f4f197e0c ("drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions")
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When translate_further is enabled, page table depth needs to
be updated. This was missing on Arcturus MMHUB init. This was
causing address translations to fail for SDMA user-mode queues.
Fixes: 352e683b72e7 ("drm/amdgpu: Enable translate_further to extend UTCL2 reach")
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To fit the latest 78.53 PMFW.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For some ASICs, like GFX IP v11.0.1, only have one SDMA instance,
so not need to configure SDMA1_RLC_CGCG_CTRL for this case.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DCN314 supports PCON.
[How]
Explicitly enable it in dcn314 resources.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable AMD_CG_SUPPORT_BIF_MGCG and AMD_CG_SUPPORT_BIF_LS support.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add BIF Clock Gating MGCG and LS support for NBIO IP v7.7.0.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the BIF0_PCIE_TX_POWER_CTRL_1 register offset and mask macro
definitions for AMD_CG_SUPPORT_BIF_LS.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull another cgroup fix from Tejun Heo:
"Commit 4f7e7236435c ("cgroup: Fix threadgroup_rwsem <->
cpus_read_lock() deadlock") required the cgroup
core to grab cpus_read_lock() before invoking ->attach().
Unfortunately, it missed adding cpus_read_lock() in
cgroup_attach_task_all(). Fix it"
* tag 'cgroup-for-6.0-rc2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Add missing cpus_read_lock() to cgroup_attach_task_all()
|
|
syzbot is hitting percpu_rwsem_assert_held(&cpu_hotplug_lock) warning at
cpuset_attach() [1], for commit 4f7e7236435ca0ab ("cgroup: Fix
threadgroup_rwsem <-> cpus_read_lock() deadlock") missed that
cpuset_attach() is also called from cgroup_attach_task_all().
Add cpus_read_lock() like what cgroup_procs_write_start() does.
Link: https://syzkaller.appspot.com/bug?extid=29d3a3b4d86c8136ad9e [1]
Reported-by: syzbot <syzbot+29d3a3b4d86c8136ad9e@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 4f7e7236435ca0ab ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock")
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The error exit of privcmd_ioctl_dm_op() is calling unlock_pages()
potentially with pages being NULL, leading to a NULL dereference.
Additionally lock_pages() doesn't check for pin_user_pages_fast()
having been completely successful, resulting in potentially not
locking all pages into memory. This could result in sporadic failures
when using the related memory in user mode.
Fix all of that by calling unlock_pages() always with the real number
of pinned pages, which will be zero in case pages being NULL, and by
checking the number of pages pinned by pin_user_pages_fast() matching
the expected number of pages.
Cc: <stable@vger.kernel.org>
Fixes: ab520be8cd5d ("xen/privcmd: Add IOCTL_PRIVCMD_DM_OP")
Reported-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Link: https://lore.kernel.org/r/20220825141918.3581-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
While reporting for the AMD retbleed vulnerability was added in
6b80b59b3555 ("x86/bugs: Report AMD retbleed vulnerability")
the new sysfs file was not mentioned so far in the ABI documentation for
sysfs-devices-system-cpu. Fix that.
Fixes: 6b80b59b3555 ("x86/bugs: Report AMD retbleed vulnerability")
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220801091529.325327-1-carnil@debian.org
|
|
Mark both the function prototype and definition as noreturn in order to
prevent the compiler from doing transformations which confuse objtool
like so:
vmlinux.o: warning: objtool: sme_enable+0x71: unreachable instruction
This triggers with gcc-12.
Add it and sev_es_terminate() to the objtool noreturn tracking array
too. Sort it while at it.
Suggested-by: Michael Matz <matz@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220824152420.20547-1-bp@alien8.de
|
|
We usually copy all bits that a request needs from the userspace for
async execution, so the userspace can keep them on the stack. However,
send zerocopy violates this pattern for addresses and may reloads it
e.g. from io-wq. Save the address if any in ->async_data as usual.
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d7512d7aa9abcd36e9afe1a4d292a24cb2d157e5.1661342812.git.asml.silence@gmail.com
[axboe: fold in incremental fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We can dereference a null pointer trying to queue work to a destroyed
workqueue.
If the device is disconnected, nintendo_hid_remove is called, in which
the rumble_queue is destroyed. Avoid using that queue to defer rumble
work once the controller state is set to JOYCON_CTLR_STATE_REMOVED.
This eliminates the null pointer dereference.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
For non-protection pXd_none() page faults in do_dat_exception(), we
call do_exception() with access == (VM_READ | VM_WRITE | VM_EXEC).
In do_exception(), vma->vm_flags is checked against that before
calling handle_mm_fault().
Since commit 92f842eac7ee3 ("[S390] store indication fault optimization"),
we call handle_mm_fault() with FAULT_FLAG_WRITE, when recognizing that
it was a write access. However, the vma flags check is still only
checking against (VM_READ | VM_WRITE | VM_EXEC), and therefore also
calling handle_mm_fault() with FAULT_FLAG_WRITE in cases where the vma
does not allow VM_WRITE.
Fix this by changing access check in do_exception() to VM_WRITE only,
when recognizing write access.
Link: https://lkml.kernel.org/r/20220811103435.188481-3-david@redhat.com
Fixes: 92f842eac7ee3 ("[S390] store indication fault optimization")
Cc: <stable@vger.kernel.org>
Reported-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The pointers for guarded storage and runtime instrumentation control
blocks are stored in the thread_struct of the associated task. These
pointers are initially copied on fork() via arch_dup_task_struct()
and then cleared via copy_thread() before fork() returns. If fork()
happens to fail after the initial task dup and before copy_thread(),
the newly allocated task and associated thread_struct memory are
freed via free_task() -> arch_release_task_struct(). This results in
a double free of the guarded storage and runtime info structs
because the fields in the failed task still refer to memory
associated with the source task.
This problem can manifest as a BUG_ON() in set_freepointer() (with
CONFIG_SLAB_FREELIST_HARDENED enabled) or KASAN splat (if enabled)
when running trinity syscall fuzz tests on s390x. To avoid this
problem, clear the associated pointer fields in
arch_dup_task_struct() immediately after the new task is copied.
Note that the RI flag is still cleared in copy_thread() because it
resides in thread stack memory and that is where stack info is
copied.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Fixes: 8d9047f8b967c ("s390/runtime instrumentation: simplify task exit handling")
Fixes: 7b83c6297d2fc ("s390/guarded storage: simplify task exit handling")
Cc: <stable@vger.kernel.org> # 4.15
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20220816155407.537372-1-bfoster@redhat.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Add device ID of Meteor Lake P into ishtp support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Link: https://lore.kernel.org/r/20220818210122.7613-1-wsa+renesas@sang-engineering.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Commit c70727a5bc18 ("xen: allow more than 512 GB of RAM for 64 bit
pv-domains") from July 2015 replaces the config XEN_MAX_DOMAIN_MEMORY with
a new config XEN_512GB, but misses to adjust arch/x86/configs/xen.config.
As XEN_512GB defaults to yes, there is no need to explicitly set any config
in xen.config.
Just remove setting the obsolete config XEN_MAX_DOMAIN_MEMORY.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220817044333.22310-1-lukas.bulwahn@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Commit d92725256b4f22d0 ("mm: avoid unnecessary page fault retires on
shared memory types") modifies do_page_fault() to handle the VM_FAULT_
COMPLETED case, but forget to change for LoongArch, so fix it as other
architectures does.
Fixes: d92725256b4f22d0 ("mm: avoid unnecessary page fault retires on shared memory types")
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch only support 32-bit/64-bit xchg/cmpxchg in native. But percpu
operation, qspinlock and some drivers need 8-bit/16-bit xchg/cmpxchg. We
add subword xchg/cmpxchg emulation in this patch because the emulation
has better performance than the generic implementation (on NUMA system),
and it can fix some build errors meanwhile [1].
LoongArch's guarantee for forward progress (avoid many ll/sc happening
at the same time and no one succeeds):
We have the "exclusive access (with timeout) of ll" feature to avoid
simultaneous ll (which also blocks other memory load/store on the same
address), and the "random delay of sc" feature to avoid simultaneous
sc. It is a mandatory requirement for multi-core LoongArch processors
to implement such features, only except those single-core and dual-core
processors (they also don't support multi-chip interconnection).
Feature bits are introduced in CPUCFG3, bit 3 and bit 4 [2].
[1] https://lore.kernel.org/loongarch/CAAhV-H6vvkuOzy8OemWdYK3taj5Jn3bFX0ZTwE=twM8ywpBUYA@mail.gmail.com/T/#t
[2] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#_cpucfg
Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When enable GENERIC_IOREMAP, there will be circular dependency to cause
build errors. The root cause is that pgtable.h shouldn't include io.h
but pgtable.h need some macros defined in io.h. So cleanup those macros
and remove the unnecessary inclusions, as other architectures do.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Cleanup reset routines by using new do_kernel_power_off() instead of old
pm_power_off(), and then simplify the whole file (reset.c) organization
by inlining some functions. This cleanup also fix a poweroff error if EFI
runtime is disabled.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Fix build warnings in VDSO as below:
arch/loongarch/vdso/vgettimeofday.c:9:5: warning: no previous prototype for '__vdso_clock_gettime' [-Wmissing-prototypes]
9 | int __vdso_clock_gettime(clockid_t clock,
| ^~~~~~~~~~~~~~~~~~~~
arch/loongarch/vdso/vgettimeofday.c:15:5: warning: no previous prototype for '__vdso_gettimeofday' [-Wmissing-prototypes]
15 | int __vdso_gettimeofday(struct __kernel_old_timeval *tv,
| ^~~~~~~~~~~~~~~~~~~
arch/loongarch/vdso/vgettimeofday.c:21:5: warning: no previous prototype for '__vdso_clock_getres' [-Wmissing-prototypes]
21 | int __vdso_clock_getres(clockid_t clock_id,
| ^~~~~~~~~~~~~~~~~~~
arch/loongarch/vdso/vgetcpu.c:27:5: warning: no previous prototype for '__vdso_getcpu' [-Wmissing-prototypes]
27 | int __vdso_getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *unused)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
PCI_LOONGSON is a mandatory for LoongArch and it is selected in Kconfig
unconditionally, but its dependency PCI_QUIRKS is missing and may cause
a build error when "make randconfig":
arch/loongarch/pci/acpi.c: In function 'pci_acpi_setup_ecam_mapping':
>> arch/loongarch/pci/acpi.c:103:29: error: 'loongson_pci_ecam_ops' undeclared (first use in this function)
103 | ecam_ops = &loongson_pci_ecam_ops;
| ^~~~~~~~~~~~~~~~~~~~~
arch/loongarch/pci/acpi.c:103:29: note: each undeclared identifier is reported only once for each function it appears in
Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for PCI_LOONGSON
Depends on [n]: PCI [=y] && (MACH_LOONGSON64 [=y] || COMPILE_TEST [=y]) && (OF [=y] || ACPI [=y]) && PCI_QUIRKS [=n]
Selected by [y]:
- LOONGARCH [=y]
Fix it by selecting PCI_QUIRKS unconditionally, too.
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Remove the default association from integer maximum value checks. It is
not necessary and has caused a bug in other associations being unnoticed.
Fixes: 923044133367 ("ACPI: property: Unify integer value reading functions")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPI node pointers are attached to data node handles, in order to resolve
string references to them. _DSD guide allows the same node to be reached
from multiple parent nodes, leading the node enumeration algorithm to each
such nodes more than once. As attached data already already exists,
attaching data with the same tag will fail. Address this problem by
ignoring nodes that have been already tagged.
Fixes: 1d52f10917a7 ("ACPI: property: Tie data nodes to acpi handles")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The current code expects the type of the value to be an integer type,
instead the value passed to the macro is a pointer.
Ensure the size comparison uses the correct pointer type to choose the
max value, instead of using the integer type.
Fixes: 923044133367 ("ACPI: property: Unify integer value reading functions")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: John Garry <john.garry@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Properly report hw rx hash for mt7986 chipset accroding to the new dma
descriptor layout.
Fixes: 197c9e9b17b11 ("net: ethernet: mtk_eth_soc: introduce support for mt7986 chipset")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/091394ea4e705fbb35f828011d98d0ba33808f69.1661257293.git.lorenzo@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
commit 87562fcd1342 ("HID: input: remove the need for HID_QUIRK_INVERT")
made the assumption that it was the only one handling tablets and thus
kept an internal state regarding the tool.
Turns out that the uclogic driver has a timer to release the in range
bit, effectively making hid-input ignoring all in range information
after the very first one.
Fix that by having a more rationale approach which consists in forwarding
every event and let the input stack filter out the duplicates.
Reported-by: Stefan Hansson <newbie13xd@gmail.com>
Fixes: 87562fcd1342 ("HID: input: remove the need for HID_QUIRK_INVERT")
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The touchbar on Apple T2 Macs has 2 modes, one that shows the function
keys and other that shows the media controls. The user can use the fn
key on his keyboard to switch between the 2 modes.
On Linux, if people were using an external keyboard or mouse, the
touchbar failed to change modes on pressing the fn key with the following
in dmesg :-
[ 10.661445] apple-ib-als 0003:05AC:8262.0001: : USB HID v1.01 Device [Apple Inc. Ambient Light Sensor] on usb-bce-vhci-3/input0
[ 11.830992] apple-ib-touchbar 0003:05AC:8302.0007: input: USB HID v1.01 Keyboard [Apple Inc. Touch Bar Display] on usb-bce-vhci-6/input0
[ 12.139407] apple-ib-touchbar 0003:05AC:8102.0008: : USB HID v1.01 Device [Apple Inc. Touch Bar Backlight] on usb-bce-vhci-7/input0
[ 12.211824] apple-ib-touchbar 0003:05AC:8102.0009: : USB HID v1.01 Device [Apple Inc. Touch Bar Backlight] on usb-bce-vhci-7/input1
[ 14.219759] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110)
[ 24.395670] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110)
[ 34.635791] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110)
[ 269.579233] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 1 (-110)
Add the USB IDs of the touchbar found in T2 Macs to HID have special
driver list to fix the issue.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Similar to the Surface Go devices, the Elantech touchscreen/digitizer in
the Lenovo Yoga C630 mistakenly reports the battery of the stylus, and
always reports an empty battery.
Apply the HID_BATTERY_QUIRK_IGNORE quirk to ignore this battery and
prevent the erroneous low battery warnings.
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Google Chromebooks use Chrome OS Embedded Controller Sensor Hub instead
of Sensor Hub Fusion and leaves MP2 uninitialized, which disables all
functionalities, even including the registers necessary for feature
detections.
The behavior was observed with Lenovo ThinkPad C13 Yoga.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add device id for the Sparco R383 Mod wheel.
Fix wheel info array length to match actual wheel count present in the array.
Signed-off-by: Michael Hübner <michaelh.95@t-online.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
There is a timing issue captured during ishtp client sending stress tests.
It was observed during stress tests that ISH firmware is getting out of
ordered messages. This is a rare scenario as the current set of ISH client
drivers don't send much data to firmware. But this may not be the case
going forward.
When message size is bigger than IPC MTU, ishtp splits the message into
fragments and uses serialized async method to send message fragments.
The call stack:
ishtp_cl_send_msg_ipc->ipc_tx_callback(first fregment)->
ishtp_send_msg(with callback)->write_ipc_to_queue->
write_ipc_from_queue->callback->ipc_tx_callback(next fregment)......
When an ipc write complete interrupt is received, driver also calls
write_ipc_from_queue->ipc_tx_callback in ISR to start sending of next fragment.
Through ipc_tx_callback uses spin_lock to protect message splitting, as the
serialized sending method will call back to ipc_tx_callback again, so it doesn't
put sending under spin_lock, it causes driver cannot guarantee all fragments
be sent in order.
Considering this scenario:
ipc_tx_callback just finished a fragment splitting, and not call ishtp_send_msg
yet, there is a write complete interrupt happens, then ISR->write_ipc_from_queue
->ipc_tx_callback->ishtp_send_msg->write_ipc_to_queue......
Because ISR has higher exec priority than normal thread, this causes the new
fragment be sent out before previous fragment. This disordered message causes
invalid message to firmware.
The solution is, to send fragments synchronously:
Use ishtp_write_message writing fragments into tx queue directly one by one,
instead of ishtp_send_msg only writing one fragment with completion callback.
As no completion callback be used, so change ipc_tx_callback to ipc_tx_send.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
