summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-03-18btrfs: factor out nocow ordered extent and extent map generation into a helperQu Wenruo
Currently we're doing all the ordered extent and extent map generation inside a while() loop of run_delalloc_nocow(). This makes it pretty hard to read, nor doing proper error handling. So move that part of code into a helper, nocow_one_range(). This should not change anything, but there is a tiny timing change where btrfs_dec_nocow_writers() is only called after nocow_one_range() helper exits. This timing change is small, and makes error handling easier, thus should be fine. Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18btrfs: expose per-inode stable writes flagQu Wenruo
The address space flag AS_STABLE_WRITES determine if FGP_STABLE for will wait for the folio to finish its writeback. For btrfs, due to the default data checksum behavior, if we modify the folio while it's still under writeback, it will cause data checksum mismatch. Thus for quite some call sites we manually call folio_wait_writeback() to prevent such problem from happening. Currently there is only one call site inside btrfs really utilizing FGP_STABLE, and in that case we also manually call folio_wait_writeback() to do the waiting. But it's better to properly expose the stable writes flag to a per-inode basis, to allow call sites to fully benefit from FGP_STABLE flag. E.g. for inodes with NODATASUM allowing beginning dirtying the page without waiting for writeback. This involves: - Update the mapping's stable write flag when setting/clearing NODATASUM inode flag using ioctl This only works for empty files, so it should be fine. - Update the mapping's stable write flag when reading an inode from disk - Remove the explicit folio_wait_writeback() for FGP_BEGINWRITE call site Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18btrfs: zlib: refactor S390x HW acceleration buffer preparationQu Wenruo
Currently for s390x HW zlib compression, to get the best performance we need a buffer size which is larger than a page. This means we need to copy multiple pages into workspace->buf, then use that buffer as zlib compression input. Currently it's hardcoded using page sized folio, and all the handling are deep inside a loop. Refactor the code by: - Introduce a dedicated helper to do the buffer copy The new helper will be called copy_data_into_buffer(). - Add extra ASSERT()s * Make sure we only go into the function for hardware acceleration * Make sure we still get page sized folio - Prepare for future large folios This means we will rely on the folio size, other than PAGE_SIZE to do the copy. - Handle the folio mapping and unmapping inside the helper function For S390x hardware acceleration case, it never utilize the @data_in pointer, thus we can do folio mapping/unmapping all inside the function. Acked-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Tested-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18btrfs: avoid assigning twice to block_start at btrfs_do_readpage()Filipe Manana
At btrfs_do_readpage() if we get an extent map for a prealloc extent we end up assigning twice to the 'block_start' variable, first the value returned by extent_map_block_start() and then EXTENT_MAP_HOLE. This is pointless so make it more clear by using an if-else statement and doing only one assignment. Also, while at it, move the declaration of 'block_start' into the while loop's scope, since it's not used outside of it and the related 'disk_bytenr' is also declared in this scope. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18btrfs: always fallback to buffered write if the inode requires checksumQu Wenruo
[BUG] It is a long known bug that VM image on btrfs can lead to data csum mismatch, if the qemu is using direct-io for the image (this is commonly known as cache mode 'none'). [CAUSE] Inside the VM, if the fs is EXT4 or XFS, or even NTFS from Windows, the fs is allowed to dirty/modify the folio even if the folio is under writeback (as long as the address space doesn't have AS_STABLE_WRITES flag inherited from the block device). This is a valid optimization to improve the concurrency, and since these filesystems have no extra checksum on data, the content change is not a problem at all. But the final write into the image file is handled by btrfs, which needs the content not to be modified during writeback, or the checksum will not match the data (checksum is calculated before submitting the bio). So EXT4/XFS/NTRFS assume they can modify the folio under writeback, but btrfs requires no modification, this leads to the false csum mismatch. This is only a controlled example, there are even cases where multi-thread programs can submit a direct IO write, then another thread modifies the direct IO buffer for whatever reason. For such cases, btrfs has no sane way to detect such cases and leads to false data csum mismatch. [FIX] I have considered the following ideas to solve the problem: - Make direct IO to always skip data checksum This not only requires a new incompatible flag, as it breaks the current per-inode NODATASUM flag. But also requires extra handling for no csum found cases. And this also reduces our checksum protection. - Let hardware handle all the checksum AKA, just nodatasum mount option. That requires trust for hardware (which is not that trustful in a lot of cases), and it's not generic at all. - Always fallback to buffered write if the inode requires checksum This was suggested by Christoph, and is the solution utilized by this patch. The cost is obvious, the extra buffer copying into page cache, thus it reduces the performance. But at least it's still user configurable, if the end user still wants the zero-copy performance, just set NODATASUM flag for the inode (which is a common practice for VM images on btrfs). Since we cannot trust user space programs to keep the buffer consistent during direct IO, we have no choice but always falling back to buffered IO. At least by this, we avoid the more deadly false data checksum mismatch error. Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-03-18blk-cgroup: improve policy registration error handlingChen Linxuan
This patch improve the returned error code of blkcg_policy_register(). 1. Move the validation check for cpd/pd_alloc_fn and cpd/pd_free_fn function pairs to the start of blkcg_policy_register(). This ensures we immediately return -EINVAL if the function pairs are not correctly provided, rather than returning -ENOSPC after locking and unlocking mutexes unnecessarily. Those locks should not contention any problems, as error of policy registration is a super cold path. 2. Return -ENOMEM when cpd_alloc_fn() failed. Co-authored-by: Wen Tao <wentao@uniontech.com> Signed-off-by: Wen Tao <wentao@uniontech.com> Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/3E333A73B6B6DFC0+20250317022924.150907-1-chenlinxuan@uniontech.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-18drm/amdgpu: Use wafl version for xgmiLijo Lazar
XGMI and WAFL share the same versions. Use WAFL version if XGMI version is not present in discovery. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amdgpu: Fix SDMA engine reset logicJesse.zhang@amd.com
The scheduler should restart only if the reset operation succeeds This ensures that new tasks are only submitted to the queues after a successful reset. Fixes: 4c02f7301657 ("drm/amdgpu: Introduce conditional user queue suspension for SDMA resets") Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jesse.Zhang <Jesse.zhang@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amdgpu/pm: Handle SCLK offset correctly in overdrive for smu 14.0.2Tomasz Pakuła
Currently, it seems like the code was carried over from RDNA3 because it assumes two possible values to set. RDNA4, instead of having: 0: min SCLK 1: max SCLK only has 0: SCLK offset This change makes it so it only reports current offset value instead of showing possible min/max values and their indices. Moreover, it now only accepts the offset as a value, without the indice index. Additionally, the lower bound was printed as %u by mistake. Old: OD_SCLK_OFFSET: 0: -500Mhz 1: 1000Mhz OD_MCLK: 0: 97Mhz 1: 1259MHz OD_VDDGFX_OFFSET: 0mV OD_RANGE: SCLK_OFFSET: -500Mhz 1000Mhz MCLK: 97Mhz 1500Mhz VDDGFX_OFFSET: -200mv 0mv New: OD_SCLK_OFFSET: 0Mhz OD_MCLK: 0: 97Mhz 1: 1259MHz OD_VDDGFX_OFFSET: 0mV OD_RANGE: SCLK_OFFSET: -500Mhz 1000Mhz MCLK: 97Mhz 1500Mhz VDDGFX_OFFSET: -200mv 0mv Setting this offset: Old: "s 1 <offset>" New: "s <offset>" Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4036 Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amdgpu: release xcp_mgr on exitFlora Cui
Free on driver cleanup. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Flora Cui <flora.cui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amd/display: 3.2.325Taimur Hassan
This version brings along following fixes: - Use DPM table clk setting for dml2 soc dscclk - Update static soc table - Fix incorrect fw_state address in dmub_srv - Use HW lock mgr for PSR1 when only one eDP - Revert "Support for reg inbox0 for host->DMUB CMDs" - Change notification of link BW allocation - Fix message for support_edp0_on_dp1 - Guard against setting dispclk low for dcn31x - Prevent VStartup Overflow - Check pipe->stream before passing it to a function Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amd/display: Use DPM table clk setting for dml2 soc dscclkCharlene Liu
[WHY] Not like dppclk/dispclk, dml2 will calculate the minimum required clocks. For dscclk, it is used for pure comparision. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amd/display: Update static soc tableCharlene Liu
[WHY] Update the static soc table dcn3_5_soc. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amd/display: Fix incorrect fw_state address in dmub_srvLo-an Chen
[WHY] The fw_state in dmub_srv was assigned with wrong address. The address was pointed to the firmware region. [HOW] Fix the firmware state by using DMUB_DEBUG_FW_STATE_OFFSET in dmub_cmd.h. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Lo-an Chen <lo-an.chen@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amd/display: Use HW lock mgr for PSR1 when only one eDPMario Limonciello
[WHY] DMUB locking is important to make sure that registers aren't accessed while in PSR. Previously it was enabled but caused a deadlock in situations with multiple eDP panels. [HOW] Detect if multiple eDP panels are in use to decide whether to use lock. Refactor the function so that the first check is for PSR-SU and then replay is in use to prevent having to look up number of eDP panels for those configurations. Fixes: f245b400a223 ("Revert "drm/amd/display: Use HW lock mgr for PSR1"") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3965 Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amd/display: Revert "Support for reg inbox0 for host->DMUB CMDs"Dillon Varone
This reverts commit 15d1c2e6bf60511ba068d7d735d051911c6c5b92. Reason: Cursor movement causes system to hang. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amd/display: Change notification of link BW allocationCruise Hung
[WHY & HOW] The response of DP BW allocation is handled in Outbox ISR. When it failed to request the DP BW allocation, it sent another DPCD request in Outbox ISR immediately. The DP AUX reply also uses the Outbox ISR. So, no AUX reply happened in this case. Change to use HPD IRQ for the notification. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amd/display: Fix message for support_edp0_on_dp1Yilin Chen
[WHY] The info message was wrong when support_edp0_on_dp1 is enabled [HOW] Use correct info message for support_edp0_on_dp1 Fixes: f6d17270d18a ("drm/amd/display: add a quirk to enable eDP0 on DP1") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Yilin Chen <Yilin.Chen@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amd/display: Guard against setting dispclk low for dcn31xJing Zhou
[WHY] We should never apply a minimum dispclk value while in prepare_bandwidth or while displays are active. This is always an optimizaiton for when all displays are disabled. [HOW] Defer dispclk optimization until safe_to_lower = true and display_count reaches 0. Since 0 has a special value in this logic (ie. no dispclk required) we also need adjust the logic that clamps it for the actual request to PMFW. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Chris Park <chris.park@amd.com> Reviewed-by: Eric Yang <eric.yang@amd.com> Signed-off-by: Jing Zhou <Jing.Zhou@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amd/display: Prevent VStartup OverflowRyan Seto
[WHY & HOW] Fixed Overflow issue by clamping VStartup to max value of register. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amd/display: Check pipe->stream before passing it to a functionAlex Hung
[WHAT & HOW] dp_is_128b_132b_signal dereferences pipe->stream so it is necessary to check it in advance. Also fix erroneous spaces and move a variable declaration to top. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amdgpu: Add debug masks for HDCP LC FW testingDominik Kaszewski
HDCP Locality Check is being moved to FW, add debug flags to control its behavior in existing hardware for validation purposes. Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amdgpu: Fix computation for remain size of CPER ringXiang Liu
The mistake of computation for remain size of CPER ring will cause unbreakable while cycle when CPER ring overflow. Signed-off-by: Xiang Liu <xiang.liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amd/amdgpu: shorten the gfx idle worker timeoutKenneth Feng
Shorten the gfx idle worker timeout. This is to sync with DAL when there is no activity on the screen. Original 1 second can not sync with DAL, so DAL can not apply MALL when the workload type is not bootup default. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amdgpu: format old RAS eeprom data into V3 versionTao Zhou
Clear old data and save it in V3 format. v2: only format eeprom data for new ASICs. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amdgpu: don't free conflicting apertures for non-display devicesAlex Deucher
PCI_CLASS_ACCELERATOR_PROCESSING devices won't ever be the sysfb, so there is no need to free conflicting apertures. Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amdgpu: adjust drm_firmware_drivers_only() handlingAlex Deucher
Move to probe so we can check the PCI device type and only apply the drm_firmware_drivers_only() check for PCI DISPLAY classes. Also add a module parameter to override the nomodeset kernel parameter as a workaround for platforms that have this hardcoded on their kernel command lines. Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18drm/amdgpu: drop drm_firmware_drivers_only()Alex Deucher
There are a number of systems and cloud providers out there that have nomodeset hardcoded in their kernel parameters to block nouveau for the nvidia driver. This prevents the amdgpu driver from loading. Unfortunately the end user cannot easily change this. The preferred way to block modules from loading is to use modprobe.blacklist=<driver>. That is what providers should be using to block specific drivers. Drop the check to allow the driver to load even when nomodeset is specified on the kernel command line. Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-18ntb_hw_amd: Add NTB PCI ID for new gen CPUBasavaraj Natikar
Add NTB support for new generation of processor. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2025-03-18ntb: reduce stack usage in idt_scan_mwsArnd Bergmann
idt_scan_mws() puts a large fixed-size array on the stack and copies it into a smaller dynamically allocated array at the end. On 32-bit targets, the fixed size can easily exceed the warning limit for possible stack overflow: drivers/ntb/hw/idt/ntb_hw_idt.c:1041:27: error: stack frame size (1032) exceeds limit (1024) in 'idt_scan_mws' [-Werror,-Wframe-larger-than] Change it to instead just always use dynamic allocation for the array from the start. It's too big for the stack, but not actually all that much for a permanent allocation. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/all/202205111109.PiKTruEj-lkp@intel.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2025-03-18locking: Move MCS struct definition to public headerKumar Kartikeya Dwivedi
Move the definition of the struct mcs_spinlock from the private mcs_spinlock.h header in kernel/locking to the mcs_spinlock.h asm-generic header, since we will need to reference it from the qspinlock.h header in subsequent commits. Reviewed-by: Barret Rhoden <brho@google.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20250316040541.108729-2-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-03-18bpf: Make perf_event_read_output accessible in all program types.Emil Tsalapatis
The perf_event_read_event_output helper is currently only available to tracing protrams, but is useful for other BPF programs like sched_ext schedulers. When the helper is available, provide its bpf_func_proto directly from the bpf base_proto. Signed-off-by: Emil Tsalapatis (Meta) <emil@etsalapatis.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20250318030753.10949-1-emil@etsalapatis.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-03-18iommu/arm-smmu-v3: Set MEV bit in nested STE for DoS mitigationsNicolin Chen
There is a DoS concern on the shared hardware event queue among devices passed through to VMs, that too many translation failures that belong to VMs could overflow the shared hardware event queue if those VMs or their VMMs don't handle/recover the devices properly. The MEV bit in the STE allows to configure the SMMU HW to merge similar event records, though there is no guarantee. Set it in a nested STE for DoS mitigations. In the future, we might want to enable the MEV for non-nested cases too such as domain->type == IOMMU_DOMAIN_UNMANAGED or even IOMMU_DOMAIN_DMA. Link: https://patch.msgid.link/r/8ed12feef67fc65273d0f5925f401a81f56acebe.1741719725.git.nicolinc@nvidia.com Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Pranjal Shrivastava <praan@google.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-03-18iommu/arm-smmu-v3: Report events that belong to devices attached to vIOMMUNicolin Chen
Aside from the IOPF framework, iommufd provides an additional pathway to report hardware events, via the vEVENTQ of vIOMMU infrastructure. Define an iommu_vevent_arm_smmuv3 uAPI structure, and report stage-1 events in the threaded IRQ handler. Also, add another four event record types that can be forwarded to a VM. Link: https://patch.msgid.link/r/5cf6719682fdfdabffdb08374cdf31ad2466d75a.1741719725.git.nicolinc@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Pranjal Shrivastava <praan@google.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-03-18iommu/arm-smmu-v3: Introduce struct arm_smmu_vmasterNicolin Chen
Use it to store all vSMMU-related data. The vsid (Virtual Stream ID) will be the first use case. Since the vsid reader will be the eventq handler that already holds a streams_mutex, reuse that to fence the vmaster too. Also add a pair of arm_smmu_attach_prepare/commit_vmaster helpers to set or unset the master->vmaster pointer. Put the helpers inside the existing arm_smmu_attach_prepare/commit(). For identity/blocked ops that don't call arm_smmu_attach_prepare/commit(), add a simpler arm_smmu_master_clear_vmaster helper to unset the vmaster. Link: https://patch.msgid.link/r/a7f282e1a531279e25f06c651e95d56f6b120886.1741719725.git.nicolinc@nvidia.com Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Pranjal Shrivastava <praan@google.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-03-18Documentation: userspace-api: iommufd: Update FAULT and VEVENTQNicolin Chen
With the introduction of the new objects, update the doc to reflect that. Link: https://patch.msgid.link/r/09829fbc218872d242323d8834da4bec187ce6f4.1741719725.git.nicolinc@nvidia.com Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-03-18iommufd/selftest: Add IOMMU_VEVENTQ_ALLOC test coverageNicolin Chen
Trigger vEVENTs by feeding an idev ID and validating the returned output virt_ids whether they equal to the value that was set to the vDEVICE. Link: https://patch.msgid.link/r/e829532ec0a3927d61161b7674b20e731ecd495b.1741719725.git.nicolinc@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-03-18iommufd/selftest: Add IOMMU_TEST_OP_TRIGGER_VEVENT for vEVENTQ coverageNicolin Chen
The handler will get vDEVICE object from the given mdev and convert it to its per-vIOMMU virtual ID to mimic a real IOMMU driver. Link: https://patch.msgid.link/r/1ea874d20e56d65e7cfd6e0e8e01bd3dbd038761.1741719725.git.nicolinc@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-03-18iommufd/selftest: Require vdev_id when attaching to a nested domainNicolin Chen
When attaching a device to a vIOMMU-based nested domain, vdev_id must be present. Add a piece of code hard-requesting it, preparing for a vEVENTQ support in the following patch. Then, update the TEST_F. A HWPT-based nested domain will return a NULL new_viommu, thus no such a vDEVICE requirement. Link: https://patch.msgid.link/r/4051ca8a819e51cb30de6b4fe9e4d94d956afe3d.1741719725.git.nicolinc@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-03-18iommufd/viommu: Add iommufd_viommu_report_event helperNicolin Chen
Similar to iommu_report_device_fault, this allows IOMMU drivers to report vIOMMU events from threaded IRQ handlers to user space hypervisors. Link: https://patch.msgid.link/r/44be825042c8255e75d0151b338ffd8ba0e4920b.1741719725.git.nicolinc@nvidia.com Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-03-18iommufd/viommu: Add iommufd_viommu_get_vdev_id helperNicolin Chen
This is a reverse search v.s. iommufd_viommu_find_dev, as drivers may want to convert a struct device pointer (physical) to its virtual device ID for an event injection to the user space VM. Again, this avoids exposing more core structures to the drivers, than the iommufd_viommu alone. Link: https://patch.msgid.link/r/18b8e8bc1b8104d43b205d21602c036fd0804e56.1741719725.git.nicolinc@nvidia.com Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-03-18iommufd: Add IOMMUFD_OBJ_VEVENTQ and IOMMUFD_CMD_VEVENTQ_ALLOCNicolin Chen
Introduce a new IOMMUFD_OBJ_VEVENTQ object for vIOMMU Event Queue that provides user space (VMM) another FD to read the vIOMMU Events. Allow a vIOMMU object to allocate vEVENTQs, with a condition that each vIOMMU can only have one single vEVENTQ per type. Add iommufd_veventq_alloc() with iommufd_veventq_ops for the new ioctl. Link: https://patch.msgid.link/r/21acf0751dd5c93846935ee06f93b9c65eff5e04.1741719725.git.nicolinc@nvidia.com Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-03-18Merge tag 'pmdomain-v6.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain fix from Ulf Hansson: - Fix amlogic T7 ISP secpower * tag 'pmdomain-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: pmdomain: amlogic: fix T7 ISP secpower
2025-03-18idpf: check error for register_netdev() on initEmil Tantilov
Current init logic ignores the error code from register_netdev(), which will cause WARN_ON() on attempt to unregister it, if there was one, and there is no info for the user that the creation of the netdev failed. WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10 ... [ 3707.563641] unregister_netdev+0x1c/0x30 [ 3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf] [ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf] [ 3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf] [ 3707.563739] idpf_remove+0xbf/0x780 [idpf] [ 3707.563769] pci_device_remove+0xab/0x1e0 [ 3707.563786] device_release_driver_internal+0x371/0x530 [ 3707.563803] driver_detach+0xbf/0x180 [ 3707.563816] bus_remove_driver+0x11b/0x2a0 [ 3707.563829] pci_unregister_driver+0x2a/0x250 Introduce an error check and log the vport number and error code. On removal make sure to check VPORT_REG_NETDEV flag prior to calling unregister and free on the netdev. Add local variables for idx, vport_config and netdev for readability. Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration") Suggested-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18ice: fix using untrusted value of pkt_len in ice_vc_fdir_parse_raw()Mateusz Polchlopek
Fix using the untrusted value of proto->raw.pkt_len in function ice_vc_fdir_parse_raw() by verifying if it does not exceed the VIRTCHNL_MAX_SIZE_RAW_PACKET value. Fixes: 99f419df8a5c ("ice: enable FDIR filters from raw binary patterns for VFs") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18ice: fix input validation for virtchnl BWLukasz Czapnik
Add missing validation of tc and queue id values sent by a VF in ice_vc_cfg_q_bw(). Additionally fixed logged value in the warning message, where max_tx_rate was incorrectly referenced instead of min_tx_rate. Also correct error handling in this function by properly exiting when invalid configuration is detected. Fixes: 015307754a19 ("ice: Support VF queue rate limit and quanta size configuration") Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com> Co-developed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18ice: validate queue quanta parameters to prevent OOB accessJan Glaza
Add queue wraparound prevention in quanta configuration. Ensure end_qid does not overflow by validating start_qid and num_queues. Fixes: 015307754a19 ("ice: Support VF queue rate limit and quanta size configuration") Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jan Glaza <jan.glaza@intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18ice: stop truncating queue ids when checkingJan Glaza
Queue IDs can be up to 4096, fix invalid check to stop truncating IDs to 8 bits. Fixes: bf93bf791cec8 ("ice: introduce ice_virtchnl.c and ice_virtchnl.h") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jan Glaza <jan.glaza@intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18virtchnl: make proto and filter action count unsignedJan Glaza
The count field in virtchnl_proto_hdrs and virtchnl_filter_action_set should never be negative while still being valid. Changing it from int to u32 ensures proper handling of values in virtchnl messages in driverrs and prevents unintended behavior. In its current signed form, a negative count does not trigger an error in ice driver but instead results in it being treated as 0. This can lead to unexpected outcomes when processing messages. By using u32, any invalid values will correctly trigger -EINVAL, making error detection more robust. Fixes: 1f7ea1cd6a374 ("ice: Enable FDIR Configure for AVF") Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jan Glaza <jan.glaza@intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-18ice: fix reservation of resources for RDMA when disabledJesse Brandeburg
If the CONFIG_INFINIBAND_IRDMA symbol is not enabled as a module or a built-in, then don't let the driver reserve resources for RDMA. The result of this change is a large savings in resources for older kernels, and a cleaner driver configuration for the IRDMA=n case for old and new kernels. Implement this by avoiding enabling the RDMA capability when scanning hardware capabilities. Note: Loading the out-of-tree irdma driver in connection to the in-kernel ice driver, is not supported, and should not be attempted, especially when disabling IRDMA in the kernel config. Fixes: d25a0fc41c1f ("ice: Initialize RDMA support") Signed-off-by: Jesse Brandeburg <jbrandeburg@cloudflare.com> Acked-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit (git 2.34.1) at 2025-09-29 15:36:54 +0000