summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-09-15hwmon: Include <linux/io.h> instead of <asm/io.h>H Hartley Sweeten
Drivers should be including <linux/io.h> instead of <asm/io.h>. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Nicolas Boichat <nicolas@boichat.ch> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Frank Seidel <frank@f-seidel.de> Acked-by: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-15hwmon: (tmp421) Add documentationAndre Prendel
Add documentation for the tmp421 driver. Signed-off-by: Andre Prendel <andre.prendel@gmx.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-15hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chipsAndre Prendel
Add support for Texas Instruments TMP421/422/423 temperature sensor IC. TI's TMP421/422/423 are I2C temperature sensor chips. These chips are similar to TI's TMP401/411 chips, but with reduced functionality (only temperature measurement). The chips have one local sensor and up to three (TMP423) remote sensors. Signed-off-by: Andre Prendel <andre.prendel@gmx.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-15hwmon-vid: Ignore 6th VID pin of AMD family 0Fh processorsJean Delvare
We had a report about a mainboard for AMD family 0Fh processors not routing the 6th VID pin from the CPU to the hardware monitoring chip. While the vendor should have wired the pin (or, failing that, should have hardwired it to level high rather than low), the fact is that none of these processors are currently known to operate at the lower voltage levels which require the 6th VID pin. So, as a practical workaround, I propose to ignore the 6th VID pin for these CPUs. If this decision ever causes problems, we'll reconsider. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Frank Myhr <fmyhr@fhmtech.com> Tested-by: Hleb Valoshka <375gnu@gmail.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
2009-09-15hwmon: (asus_atk0110) Add maintainer informationLuca Tettamanti
Add myself as asus_atk0110 maintainer. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-15hwmon: (abituguru3) Support multiple DMI strings per chip IDAlistair John Strachan
Most known Abit motherboards have unique uguru chip IDs. However, some "refresh" boards keep the same chip ID but have a different DMI string. As our DMI board string matching is (necessarily) strict, some boards were failing DMI detection, and as the old probe method was also failing, the driver would not load. The only known boards affected by this problem are the IP35 Pro XE (vs IP35 Pro) and the AB9 Pro (vs AB9). Is it not sufficient to relax the match criteria, as some boards (e.g. the AB9 Quad GT) have different uguru chip IDs. This patch replaces the dmi_name string with a NULL terminated array of strings to be matched per uguru chip ID. It has been compile and runtime tested (thanks Rune). References: https://bugs.launchpad.net/bugs/298798 Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: Rune Svendsen <runesvend@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-15sched: Add WF_FORKPeter Zijlstra
Avoid the cache buddies from biasing the time distribution away from fork()ers. Normally the next buddy will be the preferred scheduling target, but this makes fork()s prefer to run the new child, whereas we prefer to run the parent, since that will generate more work. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Rename sync argumentsPeter Zijlstra
In order to extend the functions to have more than 1 flag (sync), rename the argument to flags, and explicitly define a WF_ space for individual flags. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Rename select_task_rq() argumentPeter Zijlstra
In order to be able to rename the sync argument, we need to rename the current flag argument. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Feature to disable APERF/MPERF cpu_powerPeter Zijlstra
I suspect a feed-back loop between cpuidle and the aperf/mperf cpu_power bits, where when we have idle C-states lower the ratio, which leads to lower cpu_power and then less load, which generates more idle time, etc.. Put in a knob to disable it. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15x86: sched: Provide arch implementations using aperf/mperfPeter Zijlstra
APERF/MPERF support for cpu_power. APERF/MPERF is arch defined to be a relative scale of work capacity per logical cpu, this is assumed to include SMT and Turbo mode. APERF/MPERF are specified to both reset to 0 when either counter wraps, which is highly inconvenient, since that'll give a blimp when that happens. The manual specifies writing 0 to the counters after each read, but that's 1) too expensive, and 2) destroys the possibility of sharing these counters with other users, so we live with the blimp - the other existing user does too. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15x86: Add generic aperf/mperf codePeter Zijlstra
Move some of the aperf/mperf code out from the cpufreq driver thingy so that other people can enjoy it too. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: cpufreq@vger.kernel.org Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15x86: Move APERF/MPERF into a X86_FEATUREPeter Zijlstra
Move the APERFMPERF capacility into a X86_FEATURE flag so that it can be used outside of the acpi cpufreq driver. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: cpufreq@vger.kernel.org Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Provide arch_scale_freq_powerPeter Zijlstra
Provide an ach specific hook for cpufreq based scaling of cpu_power. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> [ego@in.ibm.com: spotting bugs] LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Reduce forkexec_idxPeter Zijlstra
If we're looking to place a new task, we might as well find the idlest position _now_, not 1 tick ago. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Improve latencies and throughputMike Galbraith
Make the idle balancer more agressive, to improve a x264 encoding workload provided by Jason Garrett-Glaser: NEXT_BUDDY NO_LB_BIAS encoded 600 frames, 252.82 fps, 22096.60 kb/s encoded 600 frames, 250.69 fps, 22096.60 kb/s encoded 600 frames, 245.76 fps, 22096.60 kb/s NO_NEXT_BUDDY LB_BIAS encoded 600 frames, 344.44 fps, 22096.60 kb/s encoded 600 frames, 346.66 fps, 22096.60 kb/s encoded 600 frames, 352.59 fps, 22096.60 kb/s NO_NEXT_BUDDY NO_LB_BIAS encoded 600 frames, 425.75 fps, 22096.60 kb/s encoded 600 frames, 425.45 fps, 22096.60 kb/s encoded 600 frames, 422.49 fps, 22096.60 kb/s Peter pointed out that this is better done via newidle_idx, not via LB_BIAS, newidle balancing should look for where there is load _now_, not where there was load 2 ticks ago. Worst-case latencies are improved as well as no buddies means less vruntime spread. (as per prior lkml discussions) This change improves kbuild-peak parallelism as well. Reported-by: Jason Garrett-Glaser <darkshikari@gmail.com> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1253011667.9128.16.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15ieee802154: add locking for seq numbersDmitry Eremin-Solenikov
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-09-15af_ieee802154: setsockopt optlen arg isn't __userDmitry Eremin-Solenikov
Remove __user annotation from optlen arg as it's bogus. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-09-15UBIFS: improve lprops dumpArtem Bityutskiy
Improve 'dbg_dump_lprop()' and print dark and dead space there, decode flags, and journal heads. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-09-15UBIFS: various minor commentary fixesArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-09-15UBIFS: improve journal head debugging printsArtem Bityutskiy
Convert the journal head integer into the head name when printing debugging information. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-09-15sched: Fix some domain tuningsPeter Zijlstra
CPU level should have WAKE_AFFINE, whereas ALLNODES is dubious. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Tweak wake_idxPeter Zijlstra
When merging select_task_rq_fair() and sched_balance_self() we lost the use of wake_idx, restore that and set them to 0 to make wake balancing more aggressive. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Fix task affinity for select_task_rq_fairPeter Zijlstra
While merging select_task_rq_fair() and sched_balance_self() I made a mistake that leads to testing the wrong task affinty. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: for_each_domain() vs RCUPeter Zijlstra
for_each_domain() uses RCU to serialize the sched_domains, except it doesn't actually use rcu_read_lock() and instead relies on disabling preemption -> FAIL. XXX: audit other sched_domain code. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Weaken SD_POWERSAVINGS_BALANCEPeter Zijlstra
One of the problems of power-saving balancing is that under certain scenarios it is too slow and allows tons of real work to pile up. Avoid this by ignoring the powersave stuff when there's real work to be done. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Merge select_task_rq_fair() and sched_balance_self()Peter Zijlstra
The problem with wake_idle() is that is doesn't respect things like cpu_power, which means it doesn't deal well with SMT nor the recent RT interaction. To cure this, it needs to do what sched_balance_self() does, which leads to the possibility of merging select_task_rq_fair() and sched_balance_self(). Modify sched_balance_self() to: - update_shares() when walking up the domain tree, (it only called it for the top domain, but it should have done this anyway), which allows us to remove this ugly bit from try_to_wake_up(). - do wake_affine() on the smallest domain that contains both this (the waking) and the prev (the wakee) cpu for WAKE invocations. Then use the top-down balance steps it had to replace wake_idle(). This leads to the dissapearance of SD_WAKE_BALANCE and SD_WAKE_IDLE_FAR, with SD_WAKE_IDLE replaced with SD_BALANCE_WAKE. SD_WAKE_AFFINE needs SD_BALANCE_WAKE to be effective. Touch all topology bits to replace the old with new SD flags -- platforms might need re-tuning, enabling SD_BALANCE_WAKE conditionally on a NUMA distance seems like a good additional feature, magny-core and small nehalem systems would want this enabled, systems with slow interconnects would not. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Add TASK_WAKINGPeter Zijlstra
We're going to want to drop rq->lock in try_to_wake_up() for a longer period of time, however we also want to deal with concurrent waking of the same task, which is currently handled by holding rq->lock. So introduce a new TASK state, namely TASK_WAKING, which indicates someone is already waking the task (other wakers will fail p->state & state). We also keep preemption disabled over the whole ttwu(). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Hook sched_balance_self() into sched_class::select_task_rq()Peter Zijlstra
Rather ugly patch to fully place the sched_balance_self() code inside the fair class. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Move sched_balance_self() into sched_fair.cPeter Zijlstra
Move the sched_balance_self() code into sched_fair.c This facilitates the merger of sched_balance_self() and sched_fair::select_task_rq(). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Move code aroundPeter Zijlstra
In preparation to other code movement, move weighted_cpuload(), source_load() and target_load() before the class includes. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Add come comments to the sched featuresPeter Zijlstra
Add text... Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Complete buddy switchesMike Galbraith
Add a NEXT_BUDDY feature flag to aid in debugging. Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Split WAKEUP_OVERLAPPeter Zijlstra
It consists of two conditions, split them out in separate toggles so we can test them independently. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Fix double_rq_lock() compile warningPeter Zijlstra
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15ASoC: S3C lrsync function made to work with IRQs disabled.Jassi
s3c2412_snd_lrsync() maybe reached with IRQs disabled and if LRCLK is dead due to improper initialization of CPU or CODEC, the system gets stuck in the loop because jiffies may never get updated. Implemented counter based wait mechanism for atleast the same timeout period. Signed-off-by: Jassi <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-15video: sh_mobile_lcdcfb: use both register sets for display panningPhil Edworthy
Switch to using both register sets - side A and side B for display panning. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15video: sh_mobile_lcdcfb: implement display panningPhil Edworthy
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15UBIFS: define journal head numbers in ubifs-media.hArtem Bityutskiy
The journal head names and numbers are part of the UBIFS format, so they should be in the ubifs-media.h. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-09-15ALSA: hda - Fix Dell S14 pin setupTakashi Iwai
The pin setup for Dell S14 quirk is rather wrong for the latest driver. Fixed pin 0x0a, 0x0b, 0x0d and 0x0f. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-15ALSA: hda - Fix IDT92HD83* codec setupTakashi Iwai
Remove unnecessary (and buggy) init sequences left for IDT92HD83* codecs in the previous fixes. The DACs are now dynamically connected, thus shouldn't be set statically in init verbs. Also, the mono_nid is detected dynamically, thus shouldn't be set staticaly, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-15HID: fix non-atomic allocation in hid_input_reportJiri Kosina
'interrupt' variable can't be used to safely determine whether we are running in atomic context or not, as we might be called from during control transfer completion through hid_ctrl() in atomic context with interrupt == 0. Reported-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-15MAINTAINERS: Update tracing tree detailsIngo Molnar
Acked-by: Steven Rostedt <srostedt@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15pkt_sched: Fix tx queue selection in tc_modify_qdiscJarek Poplawski
After the recent mq change there is the new select_queue qdisc class method used in tc_modify_qdisc, but it works OK only for direct child qdiscs of mq qdisc. Grandchildren always get the first tx queue, which would give wrong qdisc_root etc. results (e.g. for sch_htb as child of sch_prio). This patch fixes it by using parent's dev_queue for such grandchildren qdiscs. The select_queue method's return type is changed BTW. With feedback from: Patrick McHardy <kaber@trash.net> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15sky2: Make sure both ports initialize correctlyStephen Hemminger
Sorry Mike, I sent you off the wrong way. The following is simpler and the second port is diffrent enough in setup (because of NAPI), that the following is simpler. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15sky2: transmit ring accountingStephen Hemminger
Be more accurate about number of transmit list elements required. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15RxRPC: Parse security index 5 keys (Kerberos 5)David Howells
Parse RxRPC security index 5 type keys (Kerberos 5 tokens). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15RxRPC: Allow RxRPC keys to be readDavid Howells
Allow RxRPC keys to be read. This is to allow pioctl() to be implemented in userspace. RxRPC keys are read out in XDR format. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15RxRPC: Allow key payloads to be passed in XDR formDavid Howells
Allow add_key() and KEYCTL_INSTANTIATE to accept key payloads in XDR form as described by openafs-1.4.10/src/auth/afs_token.xg. This provides a way of passing kaserver, Kerberos 4, Kerberos 5 and GSSAPI keys from userspace, and allows for future expansion. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15RxRPC: Declare the security index constants symbolicallyDavid Howells
Declare the security index constants symbolically rather than just referring to them numerically. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-23 03:41:08 +0000