summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-12-26net_sched: sch_fq: properly set sk->sk_pacing_statusEric Dumazet
If fq_classify() recycles a struct fq_flow because a socket structure has been reallocated, we do not set sk->sk_pacing_status immediately, but later if the flow becomes detached. This means that any flow requiring pacing (BBR, or SO_MAX_PACING_RATE) might fallback to TCP internal pacing, which requires a per-socket high resolution timer, and therefore more cpu cycles. Fixes: 218af599fa63 ("tcp: internal implementation for pacing") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26Merge branch 'bnx2x-Bug-fixes'David S. Miller
Manish Chopra says: ==================== bnx2x: Bug fixes This series has changes in the area of vlan resources management APIs to fix fw assert issue reported in max vlan configuration testing over the PF. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26bnx2x: Fix accounting of vlan resources among the PFsManish Chopra
While testing max vlan configuration on the PF, firmware gets assert as driver was configuring number of vlans more than what is supported per port/engine, it was figured out that there is an implicit vlan (hidden default vlan consuming hardware cam entry resource) which is configured default for all the clients (PF/VFs) on client_init ramrod by the adapter implicitly, so when allocating resources among the PFs this implicit vlan should be considered or total vlan entries should be reduced by one to accommodate that default/implicit vlan entry. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26bnx2x: Use appropriate define for vlan creditManish Chopra
Although it has same value as MAX_MAC_CREDIT_E2, use MAX_VLAN_CREDIT_E2 appropriately. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2019-12-23 The following pull-request contains BPF updates for your *net* tree. We've added 2 non-merge commits during the last 1 day(s) which contain a total of 4 files changed, 34 insertions(+), 31 deletions(-). The main changes are: 1) Fix libbpf build when building on a read-only filesystem with O=dir option, from Namhyung Kim. 2) Fix a precision tracking bug for unknown scalars, from Daniel Borkmann. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26of: mdio: Add missing inline to of_mdiobus_child_is_phy() dummyGeert Uytterhoeven
If CONFIG_OF_MDIO=n: drivers/net/phy/mdio_bus.c:23: include/linux/of_mdio.h:58:13: warning: ‘of_mdiobus_child_is_phy’ defined but not used [-Wunused-function] static bool of_mdiobus_child_is_phy(struct device_node *child) ^~~~~~~~~~~~~~~~~~~~~~~ Fix this by adding the missing "inline" keyword. Fixes: 0aa4d016c043d16a ("of: mdio: export of_mdiobus_child_is_phy") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26net: phy: aquantia: add suspend / resume ops for AQR105Madalin Bucur
The suspend/resume code for AQR107 works on AQR105 too. This patch fixes issues with the partner not seeing the link down when the interface using AQR105 is brought down. Fixes: bee8259dd31f ("net: phy: add driver for aquantia phy") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26dpaa_eth: fix DMA mapping leakMadalin Bucur
On the error path some fragments remain DMA mapped. Adding a fix that unmaps all the fragments. Rework cleanup path to be simpler. Fixes: 8151ee88bad5 ("dpaa_eth: use page backed rx buffers") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26clk: Don't try to enable critical clocks if prepare failedGuenter Roeck
The following traceback is seen if a critical clock fails to prepare. bcm2835-clk 3f101000.cprman: plld: couldn't lock PLL ------------[ cut here ]------------ Enabling unprepared plld_per WARNING: CPU: 1 PID: 1 at drivers/clk/clk.c:1014 clk_core_enable+0xcc/0x2c0 ... Call trace: clk_core_enable+0xcc/0x2c0 __clk_register+0x5c4/0x788 devm_clk_hw_register+0x4c/0xb0 bcm2835_register_pll_divider+0xc0/0x150 bcm2835_clk_probe+0x134/0x1e8 platform_drv_probe+0x50/0xa0 really_probe+0xd4/0x308 driver_probe_device+0x54/0xe8 device_driver_attach+0x6c/0x78 __driver_attach+0x54/0xd8 ... Check return values from clk_core_prepare() and clk_core_enable() and bail out if any of those functions returns an error. Cc: Jerome Brunet <jbrunet@baylibre.com> Fixes: 99652a469df1 ("clk: migrate the count of orphaned clocks at init") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lkml.kernel.org/r/20191225163429.29694-1-linux@roeck-us.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix endianness issue in flowtable TCP flags dissector, from Arnd Bergmann. 2) Extend flowtable test script with dnat rules, from Florian Westphal. 3) Reject padding in ebtables user entries and validate computed user offset, reported by syzbot, from Florian Westphal. 4) Fix endianness in nft_tproxy, from Phil Sutter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26net/mlxfw: Fix out-of-memory error in mfa2 flash burningVladyslav Tarasiuk
The burning process requires to perform internal allocations of large chunks of memory. This memory doesn't need to be contiguous and can be safely allocated by vzalloc() instead of kzalloc(). This patch changes such allocation to avoid possible out-of-memory failure. Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26phy: cpcap-usb: Drop extra write to usb2 registerTony Lindgren
We are currently writing the same register twice. Let's enable the USB PHY only at the end of the function. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-26phy: cpcap-usb: Improve host vs docked mode detectionTony Lindgren
When docked to a Motorola lapdock or media dock, we're in USB A-host mode with VBUS provided by the dock. When in regular USB A-host mode, we're providing the VBUS. And in regular USB A-host mode we must also keep kicking the VBUS to keep it active. Let's wait a bit before configuring the USB PHY to allow some time between the ID and VBUS changes. And let's add vbus_provider flag so we can detect docked mode and regularo USB A-host mode better. With better USB A-host mode detection, we can now also just kick the VBUS to keep it enabled and leave out the unnecessary line muxing. We only need to set and clear vbus_provider in the delayed work so no locking is needed for it currently. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-26phy: cpcap-usb: Prevent USB line glitches from waking up modemTony Lindgren
The micro-USB connector on Motorola Mapphone devices can be muxed between the SoC and the mdm6600 modem. But even when used for the SoC, configuring the PHY with ID pin grounded will wake up the modem from idle state. Looks like the issue is probably caused by line glitches. We can prevent the glitches by using a previously unknown mode of the GPIO mux to prevent the USB lines from being connected to the moden while configuring the USB PHY, and enable the USB lines after configuring the PHY. Note that this only prevents waking up mdm6600 as regular USB A-host mode, and does not help when connected to a lapdock. The lapdock specific issue still needs to be debugged separately. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-26phy: mapphone-mdm6600: Fix uninitialized status value regressionTony Lindgren
Only the used bits get cleared with bitmap_zero() when we call gpiod_get_array_value_cansleep(). We must mask only the bits we're using for ddata->status as the other bits in the bitmap may not be initialized. And let's also drop useless debug code accidentally left over while at it. Fixes: b9762bebc633 ("gpiolib: Pass bitmaps, not integer arrays, to get/set array") Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-26phy: cpcap-usb: Fix flakey host idling and enumerating of devicesTony Lindgren
We must let the USB host idle things properly before we switch to debug UART mode. Otherwise the USB host may never idle after disconnecting devices, and that causes the next enumeration to be flakey. Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-26dmaengine: imx-sdma: Fix memory leakSascha Hauer
The current descriptor is not on any list of the virtual DMA channel. Once sdma_terminate_all() is called when a descriptor is currently in flight then this one is forgotten to be freed. We have to call vchan_terminate_vdesc() on this descriptor to re-add it to the lists. Now that we also free the currently running descriptor we can (and actually have to) remove the current descriptor from its list also for the cyclic case. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Robin Gong <yibin.gong@nxp.com> Tested-by: Robin Gong <yibin.gong@nxp.com> Link: https://lore.kernel.org/r/20191216105328.15198-10-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: imx-sdma: find desc first in sdma_tx_statusSascha Hauer
In sdma_tx_status() we must first find the current sdma_desc. In cyclic mode we assume that this can always be found with vchan_find_desc(). This is true because do not remove the current descriptor from the desc_issued list: /* * Do not delete the node in desc_issued list in cyclic mode, otherwise * the desc allocated will never be freed in vchan_dma_desc_free_list */ if (!(sdmac->flags & IMX_DMA_SG_LOOP)) list_del(&vd->node); We will change this in the next step, so check if the current descriptor is the desired one also for the cyclic case. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20191216105328.15198-9-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: imx-sdma: rename functionSascha Hauer
Rename sdma_disable_channel_async() after the hook it implements, like done for all other functions in the SDMA driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20191216105328.15198-8-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: virt-dma: use vchan_vdesc_fini() to free descriptorsSascha Hauer
vchan_dma_desc_free_list() basically open codes vchan_vdesc_fini() in its loop body. Call it directly rather than duplicating the code. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191216105328.15198-7-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: virt-dma: Add missing locking around list operationsSascha Hauer
All list operations are protected by &vc->lock. As vchan_vdesc_fini() is called unlocked add the missing locking around the list operations. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191216105328.15198-6-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: virt-dma: Do not call desc_free() under a spin_lockSascha Hauer
vchan_vdesc_fini() shouldn't be called under a spin_lock. This is done in two places, once in vchan_terminate_vdesc() and once in vchan_synchronize(). Instead of freeing the vdesc right away, collect the aborted vdescs on a separate list and free them along with the other vdescs. The terminated descs are also freed in vchan_synchronize as done before this patch. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191216105328.15198-5-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: virt-dma: remove debug messageSascha Hauer
vchan_dma_desc_free_list() basically open codes vchan_vdesc_fini() in the loop body. One difference is an additional debug message. As this isn't overly useful remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191216105328.15198-4-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: virt-dma: Add missing lockingSascha Hauer
Originally freeing descriptors was split into a locked and an unlocked part. The locked part in vchan_get_all_descriptors() collected all descriptors on a separate list_head. This was done to allow iterating over that new list in vchan_dma_desc_free_list() without a lock held. This became broken in 13bb26ae8850 ("dmaengine: virt-dma: don't always free descriptor upon completion"). With this commit vchan_dma_desc_free_list() no longer exclusively operates on the separate list, but starts to put descriptors which can be reused back on &vc->desc_allocated. This list operation should have been locked, but wasn't. In the mean time drivers started to call vchan_dma_desc_free_list() with their lock held so that we now have the situation that vchan_dma_desc_free_list() is called locked from some drivers and unlocked from others. To clean this up we have to do two things: 1. Add missing locking in vchan_dma_desc_free_list() 2. Make sure drivers call vchan_dma_desc_free_list() unlocked This needs to be done atomically, so in this patch the locking is added and all drivers are fixed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Green Wan <green.wan@sifive.com> Tested-by: Green Wan <green.wan@sifive.com> Link: https://lore.kernel.org/r/20191216105328.15198-3-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: bcm2835: do not call vchan_vdesc_fini() with lock heldSascha Hauer
vchan_vdesc_fini() can't be called locked. Instead, call vchan_terminate_vdesc() which delays the freeing of the descriptor to vchan_synchronize(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20191216105328.15198-2-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: print more meaningful error messageVinod Koul
error log for dma_channel_table_init() failure pointed a mere "initialization failure", which is not very helpful message, so print additional details like function name and error code. Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: move module_/dma_device_put() after route freeVinod Koul
We call dma_device_put() and module_put() after invoking .device_free_chan_resources callback, but we should also take care of router devices and invoke this after .route_free callback. So move it after .route_free Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-25ata: ahci_brcm: Support BCM7216 reset controller nameFlorian Fainelli
BCM7216 uses a different reset controller name which is "rescal" instead of "ahci", match the compatible string to account for that minor difference, the reset is otherwise identical to how other generations of SATA controllers work. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25dt-bindings: ata: Document BCM7216 AHCI controller compatibleFlorian Fainelli
The BCM7216 AHCI controller makes use of a specific reset controller line/name, document the compatible string and the optional reset properties. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25ata: ahci_brcm: Add a shutdown callbackFlorian Fainelli
Make sure that we quiesce the controller and shut down the clocks in a shutdown callback. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25ata: ahci_brcm: Manage reset line during suspend/resumeFlorian Fainelli
We were not managing the reset line during suspend/resume, but this needs to be done to ensure that the controller can exit low power modes correctly, especially with deep sleep suspend mode that may reset parts of the logic. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25ata: ahci_brcm: Add missing clock management during recoveryFlorian Fainelli
The downstream implementation of ahci_brcm.c did contain clock management recovery, but until recently, did that outside of the libahci_platform helpers and this was unintentionally stripped out while forward porting the patch upstream. Add the missing clock management during recovery and sleep for 10 milliseconds per the design team recommendations to ensure the SATA PHY controller and AFE have been fully quiesced. Fixes: eb73390ae241 ("ata: ahci_brcm: Recover from failures to identify devices") Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25ata: ahci_brcm: BCM7425 AHCI requires AHCI_HFLAG_DELAY_ENGINEFlorian Fainelli
Set AHCI_HFLAG_DELAY_ENGINE for the BCM7425 AHCI controller thus making it conforming to the 'strict' AHCI implementation which this controller is based on. This solves long link establishment with specific hard drives (e.g.: Seagate ST1000VM002-9ZL1 SC12) that would otherwise have to complete the error recovery handling before finally establishing a succesful SATA link at the desired speed. We re-order the hpriv->flags assignment to also remove the NONCQ quirk since we can set the flag directly. Fixes: 9586114cf1e9 ("ata: ahci_brcmstb: add support MIPS-based platforms") Fixes: 423be77daabe ("ata: ahci_brcmstb: add quirk for broken ncq") Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25ata: ahci_brcm: Fix AHCI resources managementFlorian Fainelli
The AHCI resources management within ahci_brcm.c is a little convoluted, largely because it historically had a dedicated clock that was managed within this file in the downstream tree. Once brough upstream though, the clock was left to be managed by libahci_platform.c which is entirely appropriate. This patch series ensures that the AHCI resources are fetched and enabled before any register access is done, thus avoiding bus errors on platforms which clock gate the controller by default. As a result we need to re-arrange the suspend() and resume() functions in order to avoid accessing registers after the clocks have been turned off respectively before the clocks have been turned on. Finally, we can refactor brcm_ahci_get_portmask() in order to fetch the number of ports from hpriv->mmio which is now accessible without jumping through hoops like we used to do. The commit pointed in the Fixes tag is both old and new enough not to require major headaches for backporting of this patch. Fixes: eba68f829794 ("ata: ahci_brcmstb: rename to support across Broadcom SoC's") Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()Florian Fainelli
This reverts commit 6bb86fefa086faba7b60bb452300b76a47cde1a5 ("libahci_platform: Staticize ahci_platform_<en/dis>able_phys()") we are going to need ahci_platform_{enable,disable}_phys() in a subsequent commit for ahci_brcm.c in order to properly control the PHY initialization order. Also make sure the function prototypes are declared in include/linux/ahci_platform.h as a result. Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25Merge branch 'hsr-fix-several-bugs-in-hsr-module'David S. Miller
Taehee Yoo says: ==================== hsr: fix several bugs in hsr module 1. The first patch fixes debugfs warning when it's opened when hsr module is being removed. debugfs file is opened, it tries to hold .owner module, but it would print warning messages if it couldn't hold .owner module. In order to avoid the warning message, this patch makes hsr module does not set .owner. Unsetting .owner is safe because these are protected by inode_lock(). 2. The second patch fixes wrong error handling of hsr_dev_finalize() a) hsr_dev_finalize() calls debugfs_create_{dir/file} to create debugfs. it checks NULL pointer but debugfs don't return NULL so it's wrong code. b) hsr_dev_finalize() calls register_netdevice(). so if it fails after register_netdevice(), it should call unregister_netdevice(). But it doesn't. c) debugfs doesn't affect any actual logic of hsr module. So, the failure of creating of debugfs could be ignored. 3. The third patch adds hsr root debugfs directory. When hsr interface is created, it creates debugfs directory in /sys/kernel/debug/<interface name>. It's a little bit faulty path because if an interface is the same with another directory name in the same path, it will fail. If hsr root directory is existing, the possibility of failure of creating debugfs file will be reduced. 4. The fourth patch adds debugfs rename routine. debugfs directory name is the same with hsr interface name. So hsr interface name is changed, debugfs directory name should be changed too. 5. The fifth patch fixes a race condition in node list add and del. hsr nodes are protected by RCU and there is no write side lock. But node insertions and deletions could be being operated concurrently. So write side locking is needed. 6. The Sixth patch resets network header Tap routine is enabled, below message will be printed. [ 175.852292][ C3] protocol 88fb is buggy, dev veth0 hsr module doesn't set network header for supervision frame. But tap routine validates network header. If network header wasn't set, it resets and warns about it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25hsr: reset network header when supervision frame is createdTaehee Yoo
The supervision frame is L2 frame. When supervision frame is created, hsr module doesn't set network header. If tap routine is enabled, dev_queue_xmit_nit() is called and it checks network_header. If network_header pointer wasn't set(or invalid), it resets network_header and warns. In order to avoid unnecessary warning message, resetting network_header is needed. Test commands: ip netns add nst ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link set veth1 netns nst ip link set veth3 netns nst ip link set veth0 up ip link set veth2 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec nst ip link set veth1 up ip netns exec nst ip link set veth3 up ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3 ip netns exec nst ip a a 192.168.100.2/24 dev hsr1 ip netns exec nst ip link set hsr1 up tcpdump -nei veth0 Splat looks like: [ 175.852292][ C3] protocol 88fb is buggy, dev veth0 Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25hsr: fix a race condition in node list insertion and deletionTaehee Yoo
hsr nodes are protected by RCU and there is no write side lock. But node insertions and deletions could be being operated concurrently. So write side locking is needed. Test commands: ip netns add nst ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link set veth1 netns nst ip link set veth3 netns nst ip link set veth0 up ip link set veth2 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec nst ip link set veth1 up ip netns exec nst ip link set veth3 up ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3 ip netns exec nst ip a a 192.168.100.2/24 dev hsr1 ip netns exec nst ip link set hsr1 up for i in {0..9} do for j in {0..9} do for k in {0..9} do for l in {0..9} do arping 192.168.100.2 -I hsr0 -s 00:01:3$i:4$j:5$k:6$l -c1 & done done done done Splat looks like: [ 236.066091][ T3286] list_add corruption. next->prev should be prev (ffff8880a5940300), but was ffff8880a5940d0. [ 236.069617][ T3286] ------------[ cut here ]------------ [ 236.070545][ T3286] kernel BUG at lib/list_debug.c:25! [ 236.071391][ T3286] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 236.072343][ T3286] CPU: 0 PID: 3286 Comm: arping Tainted: G W 5.5.0-rc1+ #209 [ 236.073463][ T3286] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 236.074695][ T3286] RIP: 0010:__list_add_valid+0x74/0xd0 [ 236.075499][ T3286] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 b [ 236.078277][ T3286] RSP: 0018:ffff8880aaa97648 EFLAGS: 00010286 [ 236.086991][ T3286] RAX: 0000000000000075 RBX: ffff8880d4624c20 RCX: 0000000000000000 [ 236.088000][ T3286] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed1015552ebf [ 236.098897][ T3286] RBP: ffff88809b53d200 R08: ffffed101b3c04f9 R09: ffffed101b3c04f9 [ 236.099960][ T3286] R10: 00000000308769a1 R11: ffffed101b3c04f8 R12: ffff8880d4624c28 [ 236.100974][ T3286] R13: ffff8880d4624c20 R14: 0000000040310100 R15: ffff8880ce17ee02 [ 236.138967][ T3286] FS: 00007f23479fa680(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 236.144852][ T3286] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 236.145720][ T3286] CR2: 00007f4a14bab210 CR3: 00000000a61c6001 CR4: 00000000000606f0 [ 236.146776][ T3286] Call Trace: [ 236.147222][ T3286] hsr_add_node+0x314/0x490 [hsr] [ 236.153633][ T3286] hsr_forward_skb+0x2b6/0x1bc0 [hsr] [ 236.154362][ T3286] ? rcu_read_lock_sched_held+0x90/0xc0 [ 236.155091][ T3286] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 236.156607][ T3286] hsr_dev_xmit+0x70/0xd0 [hsr] [ 236.157254][ T3286] dev_hard_start_xmit+0x160/0x740 [ 236.157941][ T3286] __dev_queue_xmit+0x1961/0x2e10 [ 236.158565][ T3286] ? netdev_core_pick_tx+0x2e0/0x2e0 [ ... ] Reported-by: syzbot+3924327f9ad5f4d2b343@syzkaller.appspotmail.com Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25hsr: rename debugfs file when interface name is changedTaehee Yoo
hsr interface has own debugfs file, which name is same with interface name. So, interface name is changed, debugfs file name should be changed too. Fixes: fc4ecaeebd26 ("net: hsr: add debugfs support for display node list") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25hsr: add hsr root debugfs directoryTaehee Yoo
In current hsr code, when hsr interface is created, it creates debugfs directory /sys/kernel/debug/<interface name>. If there is same directory or file name in there, it fails. In order to reduce possibility of failure of creation of debugfs, this patch adds root directory. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 Before this patch: /sys/kernel/debug/hsr0/node_table After this patch: /sys/kernel/debug/hsr/hsr0/node_table Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25hsr: fix error handling routine in hsr_dev_finalize()Taehee Yoo
hsr_dev_finalize() is called to create new hsr interface. There are some wrong error handling codes. 1. wrong checking return value of debugfs_create_{dir/file}. These function doesn't return NULL. If error occurs in there, it returns error pointer. So, it should check error pointer instead of NULL. 2. It doesn't unregister interface if it fails to setup hsr interface. If it fails to initialize hsr interface after register_netdevice(), it should call unregister_netdevice(). 3. Ignore failure of creation of debugfs If creating of debugfs dir and file is failed, creating hsr interface will be failed. But debugfs doesn't affect actual logic of hsr module. So, ignoring this is more correct and this behavior is more general. Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25hsr: avoid debugfs warning message when module is removeTaehee Yoo
When hsr module is being removed, debugfs_remove() is called to remove both debugfs directory and file. When module is being removed, module state is changed to MODULE_STATE_GOING then exit() is called. At this moment, module couldn't be held so try_module_get() will be failed. debugfs's open() callback tries to hold the module if .owner is existing. If it fails, warning message is printed. CPU0 CPU1 delete_module() try_stop_module() hsr_exit() open() <-- WARNING debugfs_remove() In order to avoid the warning message, this patch makes hsr module does not set .owner. Unsetting .owner is safe because these are protected by inode_lock(). Test commands: #SHELL1 ip link add dummy0 type dummy ip link add dummy1 type dummy while : do ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 modprobe -rv hsr done #SHELL2 while : do cat /sys/kernel/debug/hsr0/node_table done Splat looks like: [ 101.223783][ T1271] ------------[ cut here ]------------ [ 101.230309][ T1271] debugfs file owner did not clean up at exit: node_table [ 101.230380][ T1271] WARNING: CPU: 3 PID: 1271 at fs/debugfs/file.c:309 full_proxy_open+0x10f/0x650 [ 101.233153][ T1271] Modules linked in: hsr(-) dummy veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_d] [ 101.237112][ T1271] CPU: 3 PID: 1271 Comm: cat Tainted: G W 5.5.0-rc1+ #204 [ 101.238270][ T1271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 101.240379][ T1271] RIP: 0010:full_proxy_open+0x10f/0x650 [ 101.241166][ T1271] Code: 48 c1 ea 03 80 3c 02 00 0f 85 c1 04 00 00 49 8b 3c 24 e8 04 86 7e ff 84 c0 75 2d 4c 8 [ 101.251985][ T1271] RSP: 0018:ffff8880ca22fa38 EFLAGS: 00010286 [ 101.273355][ T1271] RAX: dffffc0000000008 RBX: ffff8880cc6e6200 RCX: 0000000000000000 [ 101.274466][ T1271] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffff8880c4dd5c14 [ 101.275581][ T1271] RBP: 0000000000000000 R08: fffffbfff2922f5d R09: 0000000000000000 [ 101.276733][ T1271] R10: 0000000000000001 R11: 0000000000000000 R12: ffffffffc0551bc0 [ 101.277853][ T1271] R13: ffff8880c4059a48 R14: ffff8880be50a5e0 R15: ffffffff941adaa0 [ 101.278956][ T1271] FS: 00007f8871cda540(0000) GS:ffff8880da800000(0000) knlGS:0000000000000000 [ 101.280216][ T1271] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 101.282832][ T1271] CR2: 00007f88717cfd10 CR3: 00000000b9440005 CR4: 00000000000606e0 [ 101.283974][ T1271] Call Trace: [ 101.285328][ T1271] do_dentry_open+0x63c/0xf50 [ 101.286077][ T1271] ? open_proxy_open+0x270/0x270 [ 101.288271][ T1271] ? __x64_sys_fchdir+0x180/0x180 [ 101.288987][ T1271] ? inode_permission+0x65/0x390 [ 101.289682][ T1271] path_openat+0x701/0x2810 [ 101.290294][ T1271] ? path_lookupat+0x880/0x880 [ 101.290957][ T1271] ? check_chain_key+0x236/0x5d0 [ 101.291676][ T1271] ? __lock_acquire+0xdfe/0x3de0 [ 101.292358][ T1271] ? sched_clock+0x5/0x10 [ 101.292962][ T1271] ? sched_clock_cpu+0x18/0x170 [ 101.293644][ T1271] ? find_held_lock+0x39/0x1d0 [ 101.305616][ T1271] do_filp_open+0x17a/0x270 [ 101.306061][ T1271] ? may_open_dev+0xc0/0xc0 [ ... ] Fixes: fc4ecaeebd26 ("net: hsr: add debugfs support for display node list") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25MAINTAINERS: Add additional maintainers to ENA Ethernet driverNetanel Belgazal
Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25libata: Fix retrieving of active qcsSascha Hauer
ata_qc_complete_multiple() is called with a mask of the still active tags. mv_sata doesn't have this information directly and instead calculates the still active tags from the started tags (ap->qc_active) and the finished tags as (ap->qc_active ^ done_mask) Since 28361c40368 the hw_tag and tag are no longer the same and the equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is started and this will be in done_mask on completion. ap->qc_active ^ done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as the internal tag will never be reported as completed. This is fixed by introducing ata_qc_get_active() which returns the active hardware tags and calling it where appropriate. This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same problem. There is another case in sata_nv that most likely needs fixing as well, but this looks a little different, so I wasn't confident enough to change that. Fixes: 28361c403683 ("libata: add extra internal command") Cc: stable@vger.kernel.org Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Add missing export of ata_qc_get_active(), as per Pali. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25spi: uniphier: Add DMA transfer mode supportKunihiko Hayashi
This adds DMA transfer mode support for UniPhier SPI controller. Since this controller requires simulteaneous transmission and reception, this indicates SPI_CONTROLLER_MUST_RX and SPI_CONTROLLER_MUST_TX. Because the supported dma controller has alignment restiction, there is also a restriction that 'maxburst' parameters in dma_slave_config corresponds to one word width. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1577149107-30670-6-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-25Merge branch 'for-5.5' of ↵Mark Brown
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.6
2019-12-25spi: tegra114: use true,false for bool variablezhengbin
Fixes coccicheck warning: drivers/spi/spi-tegra114.c:272:2-17: WARNING: Assignment of 0/1 to bool variable drivers/spi/spi-tegra114.c:275:2-17: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Link: https://lore.kernel.org/r/1577159526-33689-4-git-send-email-zhengbin13@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-25spi: imx: use true,false for bool variablezhengbin
Fixes coccicheck warning: drivers/spi/spi-imx.c:1233:2-17: WARNING: Assignment of 0/1 to bool variable drivers/spi/spi-imx.c:1235:2-17: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Link: https://lore.kernel.org/r/1577159526-33689-3-git-send-email-zhengbin13@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-25spi: fsl-lpspi: use true,false for bool variablezhengbin
Fixes coccicheck warning: drivers/spi/spi-fsl-lpspi.c:472:2-19: WARNING: Assignment of 0/1 to bool variable drivers/spi/spi-fsl-lpspi.c:474:2-19: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Link: https://lore.kernel.org/r/1577159526-33689-2-git-send-email-zhengbin13@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-25regulator: axp20x: Fix axp20x_set_ramp_delayAxel Lin
Current code set incorrect bits when set ramp_delay for AXP20X_DCDC2, fix it. Fixes: d29f54df8b16 ("regulator: axp20x: add support for set_ramp_delay for AXP209") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20191221081049.32490-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-20 17:03:47 +0000