summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-18ubifs: skip dumping tnc tree when zroot is nullpangliyuan
Clearing slab cache will free all znode in memory and make c->zroot.znode = NULL, then dumping tnc tree will access c->zroot.znode which cause null pointer dereference. Link: https://bugzilla.kernel.org/show_bug.cgi?id=219624#c0 Fixes: 1e51764a3c2a ("UBIFS: add new flash file system") Signed-off-by: pangliyuan <pangliyuan1@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2025-01-18ubi: Revert "ubi: wl: Close down wear-leveling before nand is suspended"Zhihao Cheng
Commit 5580cdae05ae ("ubi: wl: Close down wear-leveling before nand is suspended") added a reboot notification in UBI layer to shutdown the wear-leveling subsystem, which imported an UAF problem[1]. Besides that, the method also brings other potential UAF problems, for example: reboot kworker ubi_wl_reboot_notifier ubi_wl_close ubi_fastmap_close kfree(ubi->fm) update_fastmap_work_fn ubi_update_fastmap old_fm = ubi->fm if (old_fm && old_fm->e[i]) // UAF! Actually, the problem fixed by commit 5580cdae05ae ("ubi: wl: Close down wear-leveling before nand is suspended") has been solved by commit 8cba323437a4 ("mtd: rawnand: protect access to rawnand devices while in suspend"), which was discussed in [2]. So we can revert the commit 5580cdae05ae ("ubi: wl: Close down wear-leveling before nand is suspended") directly. [1] https://lore.kernel.org/linux-mtd/20241208175211.9406-2-dennis.lamerice@gmail.com/ [2] https://lore.kernel.org/all/9bf76f5d-12a4-46ff-90d4-4a7f0f47c381@axis.com/ Fixes: 5580cdae05ae ("ubi: wl: Close down wear-leveling before nand is suspended") Reported-by: Dennis Lam <dennis.lamerice@gmail.com> Closes: https://lore.kernel.org/linux-mtd/20241208175211.9406-2-dennis.lamerice@gmail.com/ Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Acked-by: Mårten Lindahl <marten.lindahl@axis.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2025-01-18ubifs: ubifs_dump_leb: remove return from end of void functionPintu Kumar
Noticed that there is a useless return statement at the end of void function ubifs_dump_leb(). Just removed it. Signed-off-by: Pintu Kumar <quic_pintu@quicinc.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2025-01-18ubifs: dump_lpt_leb: remove return at end of void functionPintu Kumar
Noticed that there is a useless return statement at the end of void function dump_lpt_leb(). Just removing it. Signed-off-by: Pintu Kumar <quic_pintu@quicinc.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2025-01-18ubi: Add a check for ubi_numDenis Arefev
Added a check for ubi_num for negative numbers If the variable ubi_num takes negative values then we get: qemu-system-arm ... -append "ubi.mtd=0,0,0,-22222345" ... [ 0.745065] ubi_attach_mtd_dev from ubi_init+0x178/0x218 [ 0.745230] ubi_init from do_one_initcall+0x70/0x1ac [ 0.745344] do_one_initcall from kernel_init_freeable+0x198/0x224 [ 0.745474] kernel_init_freeable from kernel_init+0x18/0x134 [ 0.745600] kernel_init from ret_from_fork+0x14/0x28 [ 0.745727] Exception stack(0x90015fb0 to 0x90015ff8) Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 83ff59a06663 ("UBI: support ubi_num on mtd.ubi command line") Cc: stable@vger.kernel.org Signed-off-by: Denis Arefev <arefev@swemel.ru> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2025-01-18ALSA: scarlett2: Add device_setup option to use FCP driverGeoffrey D. Bennett
Add a new device_setup option (SCARLETT2_USE_FCP_DRIVER = 0x08) that allows users to opt in to using the new FCP driver instead of the existing scarlett2 driver for their device. This provides a way to test the new FCP driver on existing supported hardware while keeping the Scarlett2 driver as the default. When the SCARLETT2_USE_FCP_DRIVER bit is set in device_setup, the scarlett2 driver initialisation will hand off to the FCP driver instead of proceeding with its own initialisation. The FCP driver then provides access to the device via its hwdep interface. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://patch.msgid.link/94ffd7971d73cb0cbea6933b28f7528ce5b9edde.1737048528.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-01-18ALSA: FCP: Add Focusrite Control Protocol driverGeoffrey D. Bennett
Add a new kernel driver for the Focusrite Control Protocol (FCP), which is used by Focusrite Scarlett 2nd Gen, 3rd Gen, 4th Gen, Clarett USB, Clarett+, and Vocaster series audio interfaces. This driver provides a user-space control interface via ALSA's hwdep subsystem. Unlike the existing Scarlett2 driver which implements all ALSA controls in kernel space, this new FCP driver takes a different approach by providing a minimal kernel interface that allows a user-space driver to send FCP commands and receive notifications. The only control implemented in kernel space is the Level Meter, since it requires frequent polling of volatile data. While this driver supports all interfaces that the Scarlett2 driver works with, it is initially enabled only for 4th Gen 16i16, 18i16, and 18i20 interfaces that are not supported by the Scarlett2 driver. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://patch.msgid.link/597741a9b1198b965561547511d3d345f91cba20.1737048528.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-01-18Merge tag 'asoc-fix-v6.13-rc7' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.13 A few final driver specific fixes - a couple of x86 ID field changes, plus bug fixes for simple-card-utils and nau8824.
2025-01-17Merge branch 'ethtool-get_ts_stats-for-dsa-and-ocelot-driver'Jakub Kicinski
Vladimir Oltean says: ==================== ethtool get_ts_stats() for DSA and ocelot driver After a recent patch set with fixes and general restructuring, Jakub asked for the Felix DSA driver to start reporting standardized statistics for hardware timestamping: https://lore.kernel.org/netdev/20241207180640.12da60ed@kernel.org/ Testing follows the same procedure as in the aforementioned series, with PTP packet loss induced through taprio: $ ethtool -I --show-time-stamping swp3 Time stamping parameters for swp3: Capabilities: hardware-transmit software-transmit hardware-receive software-receive software-system-clock hardware-raw-clock PTP Hardware Clock: 1 Hardware Transmit Timestamp Modes: off on onestep-sync Hardware Receive Filter Modes: none ptpv2-l4-event ptpv2-l2-event ptpv2-event Statistics: tx_pkts: 14591 tx_lost: 85 tx_err: 0 v1: https://lore.kernel.org/20241213140852.1254063-1-vladimir.oltean@nxp.com/ ==================== Link: https://patch.msgid.link/20250116104628.123555-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net: dsa: felix: report timestamping stats from the ocelot libraryVladimir Oltean
Make the linkage between the DSA user port ethtool_ops :: get_ts_info and the implementation from the Ocelot switch library. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250116104628.123555-5-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net: mscc: ocelot: add TX timestamping statisticsVladimir Oltean
Add an u64 hardware timestamping statistics structure for each ocelot port. Export a function from the common switch library for reporting them to ethtool. This is called by the ocelot switchdev front-end for now. Note that for the switchdev driver, we report the one-step PTP packets as unconfirmed, even though in principle, for some transmission mechanisms like FDMA, we may be able to confirm transmission and bump the "pkts" counter in ocelot_fdma_tx_cleanup() instead. I don't have access to hardware which uses the switchdev front-end, and I've kept the implementation simple. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250116104628.123555-4-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net: dsa: implement get_ts_stats ethtool operation for user portsVladimir Oltean
Integrate with the standard infrastructure for reporting hardware packet timestamping statistics. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250116104628.123555-3-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net: ethtool: ts: add separate counter for unconfirmed one-step TX timestampsVladimir Oltean
For packets with two-step timestamp requests, the hardware timestamp comes back to the driver through a confirmation mechanism of sorts, which allows the driver to confidently bump the successful "pkts" counter. For one-step PTP, the NIC is supposed to autonomously insert its hardware TX timestamp in the packet headers while simultaneously transmitting it. There may be a confirmation that this was done successfully, or there may not. None of the current drivers which implement ethtool_ops :: get_ts_stats() also support HWTSTAMP_TX_ONESTEP_SYNC or HWTSTAMP_TX_ONESTEP_SYNC, so it is a bit unclear which model to follow. But there are NICs, such as DSA, where there is no transmit confirmation at all. Here, it would be wrong / misleading to increment the successful "pkts" counter, because one-step PTP packets can be dropped on TX just like any other packets. So introduce a special counter which signifies "yes, an attempt was made, but we don't know whether it also exited the port or not". I expect that for one-step PTP packets where a confirmation is available, the "pkts" counter would be bumped. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250116104628.123555-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17Merge branch 'mlxsw-move-tx-header-handling-to-pci-driver'Jakub Kicinski
Petr Machata says: ==================== mlxsw: Move Tx header handling to PCI driver Amit Cohen writes: Tx header should be added to all packets transmitted from the CPU to Spectrum ASICs. Historically, handling this header was added as a driver function, as Tx header is different between Spectrum and Switch-X. From May 2021, there is no support for SwitchX-2 ASIC, and all the relevant code was removed. For now, there is no justification to handle Tx header as part of spectrum.c, we can handle this as part of PCI, in skb_transmit(). This change will also be useful when XDP support will be added to mlxsw, as for XDP_TX and XDP_REDIRECT actions, Tx header should be added before transmitting the packet. Patch set overview: Patches #1-#2 add structure to store Tx header info and initialize it Patch #3 moves definitions of Tx header fields to txheader.h Patch #4 moves Tx header handling to PCI driver Patch #5 removes unnecessary attribute ==================== Link: https://patch.msgid.link/cover.1737044384.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17mlxsw: Do not store Tx header length as driver parameterAmit Cohen
Tx header handling was moved to PCI code, as there is no several drivers which configure Tx header differently. Tx header length is stored as driver parameter, this is not really necessary as it always stores the same value. Remove this field and use the macro MLXSW_TXHDR_LEN explicitly. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/1fb7b3f007de4d311e559c8a954b673d0895d5e9.1737044384.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17mlxsw: Move Tx header handling to PCI driverAmit Cohen
Tx header should be added to all packets transmitted from the CPU to Spectrum ASICs. Historically, handling this header was added as a driver function, as Tx header is different between Spectrum and Switch-X. See SwitchX implementation in commit 31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support"). From May 2021, there is no support for SwitchX-2 ASIC, and all the relevant code was removed. For now, there is no justification to handle Tx header as part of spectrum.c, we can handle this as part of PCI, in skb_transmit(). A future patch set will add support for XDP in mlxsw driver, to support XDP_TX and XDP_REDIRECT actions, Tx header should be added before transmitting the packet. As preparation for this, move Tx header handling to PCI driver, so then XDP code will not have to call API from spectrum.c. This also improves the code as now Tx header is pushed just before transmitting, so it is not done from many flows which might miss something. Note that for PTP, we should configure Tx header differently, use the fields from mlxsw_txhdr_info to configure the packets correctly in PCI driver. Handle VLAN tagging in switch driver, verify that packet which should be transmitted as data is tagged, otherwise, tag it. Remove the calls for thxdr_construct() functions, as now this is done as part of skb_transmit(). Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/293a81e6f7d59a8ec9f9592edb7745536649ff11.1737044384.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17mlxsw: Define Tx header fields in txheader.hAmit Cohen
The next patch will move Tx header constructing to pci.c. As preparation, move the definitions of Tx header fields from spectrum.c to txheader.h, so pci.c will include this header and can access the fields. Remove 'etclass' which is not used. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/2250b5cb3998ab4850fc8251c3a0f5926d32e194.1737044384.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17mlxsw: Initialize txhdr_info according to PTP operationsAmit Cohen
A next patch will construct Tx header as part of pci.c. The switch driver (mlxsw_spectrum.ko) should encapsulate all the differences between the different ASICs and the bus driver (mlxsw_pci.ko) should remain unaware. As preparation, add the relevant info as part of mlxsw_txhdr_info structure, so later bus driver will merely construct the Tx header based on information passed from the switch driver. Most of the packets are transmitted as control packets, but PTP packets in Spectrum-2 and Spectrum-3 should be handled differently. The driver transmits them as data packets, and the default VLAN tag (4095) is added if the packet is not already tagged. Extend PTP operations to store a boolean which indicates whether packets should be transmitted as data packets. Set it for Spectrum-2 and Spectrum-3 only. Extend mlxsw_txhdr_info to store fields which will be used later to construct Tx header. Initialize such fields according to the new boolean which is stored in PTP operations. Note that for now, mlxsw_txhdr_info structure is initialized, but not used, a next patch will use it. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/efcaacd4bedef524e840a0c29f96cebf2c4bc0e0.1737044384.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17mlxsw: Add mlxsw_txhdr_info structureAmit Cohen
mlxsw_tx_info structure is used to store information that is needed to process Tx completions when Tx time stamps are requested. A next patch will move Tx header handling from spectrum.c to pci.c. For that, some additional fields which are related to Tx should be passed to pci driver. As preparation, create an extended structure, called mlxsw_txhdr_info, and store mlxsw_tx_info inside. The new fields should not be added to mlxsw_tx_info structure as it is stored in the SKB control block which is of limited size. The next patch will extend the new structure with some fields which are needed in order to construct Tx header. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/93aed1961f046f79f46869bab37a3faa5027751d.1737044384.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net/mlx5: fix unintentional sign extension on shift of dest_attr->vport.vhca_idColin Ian King
Shifting dest_attr->vport.vhca_id << 16 results in a promotion from an unsigned 16 bit integer to a 32 bit signed integer, this is then sign extended to a 64 bit unsigned long on 64 bitarchitectures. If vhca_id is greater than 0x7fff then this leads to a sign extended result where all the upper 32 bits of idx are set to 1. Fix this by casting vhca_id to the same type as idx before performing the shift. Fixes: 8e2e08a6d1e0 ("net/mlx5: fs, add support for dest vport HWS action") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Moshe Shemesh <moshe@nvidia.com> Link: https://patch.msgid.link/20250116181700.96437-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net: tc: improve qdisc error messagesJohn Ousterhout
The existing error message ("Invalid qdisc name") is confusing because it suggests that there is no qdisc with the given name. In fact, the name does refer to a valid qdisc, but it doesn't match the kind of an existing qdisc being modified or replaced. The new error message provides more detail to eliminate confusion. Signed-off-by: John Ousterhout <ouster@cs.stanford.edu> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20250116195642.2794-1-ouster@cs.stanford.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: support FW Recovery Mode Konrad Knitter says: Enable update of card in FW Recovery Mode * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: support FW Recovery Mode devlink: add devl guard pldmfw: enable selected component update ==================== Link: https://patch.msgid.link/20250116212059.1254349-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17hv_netvsc: Replace one-element array with flexible array memberThorsten Blum
Replace the deprecated one-element array with a modern flexible array member in the struct nvsp_1_message_send_receive_buffer_complete. Use struct_size_t(,,1) instead of sizeof() to maintain the same size. Compile-tested only. Link: https://github.com/KSPP/linux/issues/79 Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Tested-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://patch.msgid.link/20250116211932.139564-2-thorsten.blum@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17gtp: Prepare ip4_route_output_gtp() to .flowi4_tos conversion.Guillaume Nault
Use inet_sk_dscp() to get the socket DSCP value as dscp_t, instead of ip_sock_rt_tos() which returns a __u8. This will ease the conversion of fl4->flowi4_tos to dscp_t, which now just becomes a matter of dropping the inet_dscp_to_dsfield() call. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/06bdb310a075355ff059cd32da2efc29a63981c9.1737034675.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17dccp: Prepare dccp_v4_route_skb() to .flowi4_tos conversion.Guillaume Nault
Use inet_sk_dscp() to get the socket DSCP value as dscp_t, instead of ip_sock_rt_tos() which returns a __u8. This will ease the conversion of fl4->flowi4_tos to dscp_t, which now just becomes a matter of dropping the inet_dscp_to_dsfield() call. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/208dc5ca28bb5595d7a545de026bba18b1d63bda.1737032802.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net/mlxfw: Drop hard coded max FW flash image sizeMaher Sanalla
Currently, mlxfw kernel module limits FW flash image size to be 10MB at most, preventing the ability to burn recent BlueField-3 FW that exceeds the said size limit. Thus, drop the hard coded limit. Instead, rely on FW's max_component_size threshold that is reported in MCQI register as the size limit for FW image. Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/1737030796-1441634-1-git-send-email-moshe@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net: let net.core.dev_weight always be non-zeroLiu Jian
The following problem was encountered during stability test: (NULL net_device): NAPI poll function process_backlog+0x0/0x530 \ returned 1, exceeding its budget of 0. ------------[ cut here ]------------ list_add double add: new=ffff88905f746f48, prev=ffff88905f746f48, \ next=ffff88905f746e40. WARNING: CPU: 18 PID: 5462 at lib/list_debug.c:35 \ __list_add_valid_or_report+0xf3/0x130 CPU: 18 UID: 0 PID: 5462 Comm: ping Kdump: loaded Not tainted 6.13.0-rc7+ RIP: 0010:__list_add_valid_or_report+0xf3/0x130 Call Trace: ? __warn+0xcd/0x250 ? __list_add_valid_or_report+0xf3/0x130 enqueue_to_backlog+0x923/0x1070 netif_rx_internal+0x92/0x2b0 __netif_rx+0x15/0x170 loopback_xmit+0x2ef/0x450 dev_hard_start_xmit+0x103/0x490 __dev_queue_xmit+0xeac/0x1950 ip_finish_output2+0x6cc/0x1620 ip_output+0x161/0x270 ip_push_pending_frames+0x155/0x1a0 raw_sendmsg+0xe13/0x1550 __sys_sendto+0x3bf/0x4e0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x5b/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e The reproduction command is as follows: sysctl -w net.core.dev_weight=0 ping 127.0.0.1 This is because when the napi's weight is set to 0, process_backlog() may return 0 and clear the NAPI_STATE_SCHED bit of napi->state, causing this napi to be re-polled in net_rx_action() until __do_softirq() times out. Since the NAPI_STATE_SCHED bit has been cleared, napi_schedule_rps() can be retriggered in enqueue_to_backlog(), causing this issue. Making the napi's weight always non-zero solves this problem. Triggering this issue requires system-wide admin (setting is not namespaced). Fixes: e38766054509 ("[NET]: Fix sysctl net.core.dev_weight") Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality") Signed-off-by: Liu Jian <liujian56@huawei.com> Link: https://patch.msgid.link/20250116143053.4146855-1-liujian56@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17selftests: net: give up on the cmsg_time accuracy on slow machinesJakub Kicinski
Commit b9d5f5711dd8 ("selftests: net: increase the delay for relative cmsg_time.sh test") widened the accepted value range 8x but we still see flakes (at a rate of around 7%). Return XFAIL for the most timing sensitive test on slow machines. Before: # ./cmsg_time.sh Case UDPv4 - TXTIME rel returned '8074us - 7397us < 4000', expected 'OK' FAIL - 1/36 cases failed After: # ./cmsg_time.sh Case UDPv4 - TXTIME rel returned '1123us - 941us < 500', expected 'OK' (XFAIL) Case UDPv6 - TXTIME rel returned '1227us - 776us < 500', expected 'OK' (XFAIL) OK Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250116020105.931338-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17Input: xpad - add support for Nacon Evol-X Xbox One ControllerMatheos Mattsson
Add Nacon Evol-X Xbox One to the list of supported devices. Signed-off-by: Matheos Mattsson <matheos.mattsson@gmail.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20250107192830.414709-9-rojtberg@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-01-17Input: xpad - add unofficial Xbox 360 wireless receiver cloneNilton Perim Neto
Although it mimics the Microsoft's VendorID, it is in fact a clone. Taking into account that the original Microsoft Receiver is not being manufactured anymore, this drive can solve dpad issues encontered by those who still use the original 360 Wireless controller but are using a receiver clone. Signed-off-by: Nilton Perim Neto <niltonperimneto@gmail.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20250107192830.414709-12-rojtberg@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-01-17Input: xpad - add support for wooting two he (arm)Jack Greiner
Add Wooting Two HE (ARM) to the list of supported devices. Signed-off-by: Jack Greiner <jack@emoss.org> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20250107192830.414709-3-rojtberg@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-01-17Input: xpad - improve name of 8BitDo controller 2dc8:3106Leonardo Brondani Schenkel
8BitDo Pro 2 Wired Controller shares the same USB identifier (2dc8:3106) as a different device, so amend name to reflect that and reduce confusion as the user might think the controller was misdetected. Because Pro 2 Wired will not work in XTYPE_XBOXONE mode (button presses won't register), tagging it as XTYPE_XBOX360 remains appropriate. Signed-off-by: Leonardo Brondani Schenkel <leonardo@schenkel.net> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20250107192830.414709-2-rojtberg@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-01-18genksyms: fix syntax error for attribute after 'struct'Masahiro Yamada
A longstanding issue with genksyms is that it has hidden syntax errors. When a syntax error occurs, yyerror() is called. However, error_with_pos() is a no-op unless the -w option is provided. You can observe syntax errors by manually passing the -w option. For example, with CONFIG_MODVERSIONS=y on v6.13-rc1: $ make -s KCFLAGS=-D__GENKSYMS__ arch/x86/kernel/cpu/mshyperv.i $ cat arch/x86/kernel/cpu/mshyperv.i | scripts/genksyms/genksyms -w [ snip ] ./arch/x86/include/asm/svm.h:122: syntax error The syntax error occurs in the following code in arch/x86/include/asm/svm.h: struct __attribute__ ((__packed__)) vmcb_control_area { [ snip ] }; The issue arises from __attribute__ immediately after the 'struct' keyword. This commit allows the 'struct' keyword to be followed by attributes. The lexer must be adjusted because dont_want_brace_phase should not be decremented while processing attributes. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nicolas Schier <n.schier@avm.de>
2025-01-18genksyms: fix syntax error for attribute after abstact_declaratorMasahiro Yamada
A longstanding issue with genksyms is that it has hidden syntax errors. When a syntax error occurs, yyerror() is called. However, error_with_pos() is a no-op unless the -w option is provided. You can observe syntax errors by manually passing the -w option. For example, with CONFIG_MODVERSIONS=y on v6.13-rc1: $ make -s KCFLAGS=-D__GENKSYMS__ kernel/module/main.i $ cat kernel/module/main.i | scripts/genksyms/genksyms -w [ snip ] kernel/module/main.c:97: syntax error The syntax error occurs in the following code in kernel/module/main.c: static void __mod_update_bounds(enum mod_mem_type type __maybe_unused, void *base, unsigned int size, struct mod_tree_root *tree) { [ snip ] } The issue arises from __maybe_unused, which is defined as __attribute__((__unused__)). This commit allows direct_abstract_declarator to be followed with attributes. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nicolas Schier <n.schier@avm.de>
2025-01-18genksyms: fix syntax error for attribute before nested_declaratorMasahiro Yamada
A longstanding issue with genksyms is that it has hidden syntax errors. When a syntax error occurs, yyerror() is called. However, error_with_pos() is a no-op unless the -w option is provided. You can observe syntax errors by manually passing the -w option. For example, with CONFIG_MODVERSIONS=y on v6.13-rc1: $ make -s KCFLAGS=-D__GENKSYMS__ drivers/acpi/prmt.i $ cat drivers/acpi/prmt.i | scripts/genksyms/genksyms -w [ snip ] drivers/acpi/prmt.c:56: syntax error The syntax error occurs in the following code in drivers/acpi/prmt.c: struct prm_handler_info { [ snip ] efi_status_t (__efiapi *handler_addr)(u64, void *); [ snip ] }; The issue arises from __efiapi, which is defined as either __attribute__((ms_abi)) or __attribute__((regparm(0))). This commit allows nested_declarator to be prefixed with attributes. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nicolas Schier <n.schier@avm.de>
2025-01-18genksyms: fix syntax error for attribute before abstract_declaratorMasahiro Yamada
A longstanding issue with genksyms is that it has hidden syntax errors. When a syntax error occurs, yyerror() is called. However, error_with_pos() is a no-op unless the -w option is provided. You can observe syntax errors by manually passing the -w option. For example, with CONFIG_MODVERSIONS=y on v6.13-rc1: $ make -s KCFLAGS=-D__GENKSYMS__ init/main.i $ cat init/main.i | scripts/genksyms/genksyms -w [ snip ] ./include/linux/efi.h:1225: syntax error The syntax error occurs in the following code in include/linux/efi.h: efi_status_t efi_call_acpi_prm_handler(efi_status_t (__efiapi *handler_addr)(u64, void *), u64 param_buffer_addr, void *context); The issue arises from __efiapi, which is defined as either __attribute__((ms_abi)) or __attribute__((regparm(0))). This commit allows abstract_declarator to be prefixed with attributes. To avoid conflicts, I tweaked the rule for decl_specifier_seq. Due to this change, a standalone attribute cannot become decl_specifier_seq. Otherwise, I do not know how to resolve the conflicts. The following code, which was previously accepted by genksyms, will now result in a syntax error: void my_func(__attribute__((unused))x); I do not think it is a big deal because GCC also fails to parse it. $ echo 'void my_func(__attribute__((unused))x);' | gcc -c -x c - <stdin>:1:37: error: unknown type name 'x' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nicolas Schier <n.schier@avm.de>
2025-01-18genksyms: decouple ATTRIBUTE_PHRASE from type-qualifierMasahiro Yamada
The __attribute__ keyword can appear in more contexts than 'const' or 'volatile'. To avoid grammatical conflicts with future changes, ATTRIBUTE_PHRASE should not be reduced into type_qualifier. No functional changes are intended. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nicolas Schier <n.schier@avm.de>
2025-01-18genksyms: record attributes consistently for init-declaratorMasahiro Yamada
I believe the missing action here is a bug. For rules with no explicit action, the following default is used: { $$ = $1; } However, in this case, $1 is the value of attribute_opt itself. As a result, the value of attribute_opt is always NULL. The following test code demonstrates inconsistent behavior. int x __attribute__((__aligned__(4))); int y __attribute__((__aligned__(4))) = 0; The attribute is recorded only when followed by an initializer. This commit adds the correct action to propagate the value of the ATTRIBUTE_PHRASE token. With this change, the attribute in the example above is consistently recorded for both 'x' and 'y'. [Before] $ cat <<EOF | scripts/genksyms/genksyms -d int x __attribute__((__aligned__(4))); int y __attribute__((__aligned__(4))) = 0; EOF Defn for type0 x == <int x > Defn for type0 y == <int y __attribute__ ( ( __aligned__ ( 4 ) ) ) > Hash table occupancy 2/4096 = 0.000488281 [After] $ cat <<EOF | scripts/genksyms/genksyms -d int x __attribute__((__aligned__(4))); int y __attribute__((__aligned__(4))) = 0; EOF Defn for type0 x == <int x __attribute__ ( ( __aligned__ ( 4 ) ) ) > Defn for type0 y == <int y __attribute__ ( ( __aligned__ ( 4 ) ) ) > Hash table occupancy 2/4096 = 0.000488281 Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nicolas Schier <n.schier@avm.de>
2025-01-18genksyms: restrict direct-declarator to take one parameter-type-listMasahiro Yamada
Similar to the previous commit, this change makes the parser logic a little more accurate. Currently, genksyms accepts the following invalid code: struct foo { int (*callback)(int)(int)(int); }; A direct-declarator should not recursively absorb multiple ( parameter-type-list ) constructs. In the example above, (*callback) should be followed by at most one (int). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nicolas Schier <n.schier@avm.de>
2025-01-18genksyms: restrict direct-abstract-declarator to take one parameter-type-listMasahiro Yamada
While there is no more grammatical ambiguity in genksyms, the parser logic is still inaccurate. For example, genksyms accepts the following invalid C code: void my_func(int ()(int)); This should result in a syntax error because () cannot be reduced to <direct-abstract-declarator>. ( <abstract-declarator> ) can be reduced, but <abstract-declarator> must not be empty in the following grammar from K&R [1]: <direct-abstract-declarator> ::= ( <abstract-declarator> ) | {<direct-abstract-declarator>}? [ {<constant-expression>}? ] | {<direct-abstract-declarator>}? ( {<parameter-type-list>}? ) Furthermore, genksyms accepts the following weird code: void my_func(int (*callback)(int)(int)(int)); The parser allows <direct-abstract-declarator> to recursively absorb multiple ( {<parameter-type-list>}? ), but this behavior is incorrect. In the example above, (*callback) should be followed by at most one (int). [1]: https://cs.wmich.edu/~gupta/teaching/cs4850/sumII06/The%20syntax%20of%20C%20in%20Backus-Naur%20form.htm Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nicolas Schier <n.schier@avm.de>
2025-01-18genksyms: remove Makefile hackMasahiro Yamada
This workaround was introduced for suppressing the reduce/reduce conflict warnings because the %expect-rr directive, which is applicable only to GLR parsers, cannot be used for genksyms. Since there are no longer any conflicts, this Makefile hack is now unnecessary. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nicolas Schier <n.schier@avm.de>
2025-01-18genksyms: fix last 3 shift/reduce conflictsMasahiro Yamada
The genksyms parser has ambiguities in its grammar, which are currently suppressed by a workaround in scripts/genksyms/Makefile. Building genksyms with W=1 generates the following warnings: YACC scripts/genksyms/parse.tab.[ch] scripts/genksyms/parse.y: warning: 3 shift/reduce conflicts [-Wconflicts-sr] scripts/genksyms/parse.y: note: rerun with option '-Wcounterexamples' to generate conflict counterexamples The ambiguity arises when decl_specifier_seq is followed by '(' because the following two interpretations are possible: - decl_specifier_seq direct_abstract_declarator '(' parameter_declaration_clause ')' - decl_specifier_seq '(' abstract_declarator ')' This issue occurs because the current parser allows an empty string to be reduced to direct_abstract_declarator, which is incorrect. K&R [1] explains the correct grammar: <parameter-declaration> ::= {<declaration-specifier>}+ <declarator> | {<declaration-specifier>}+ <abstract-declarator> | {<declaration-specifier>}+ <abstract-declarator> ::= <pointer> | <pointer> <direct-abstract-declarator> | <direct-abstract-declarator> <direct-abstract-declarator> ::= ( <abstract-declarator> ) | {<direct-abstract-declarator>}? [ {<constant-expression>}? ] | {<direct-abstract-declarator>}? ( {<parameter-type-list>}? ) This commit resolves all remaining conflicts. We need to consider the difference between the following two examples: [Example 1] ( <abstract-declarator> ) can become <direct-abstract-declarator> void my_func(int (foo)); ... is equivalent to: void my_func(int foo); [Example 2] ( <parameter-type-list> ) can become <direct-abstract-declarator> typedef int foo; void my_func(int (foo)); ... is equivalent to: void my_func(int (*callback)(int)); Please note that the function declaration is identical in both examples, but the preceding typedef creates the distinction. I introduced a new term, open_paren, to enable the type lookup immediately after the '(' token. Without this, we cannot distinguish between [Example 1] and [Example 2]. [1]: https://cs.wmich.edu/~gupta/teaching/cs4850/sumII06/The%20syntax%20of%20C%20in%20Backus-Naur%20form.htm Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nicolas Schier <n.schier@avm.de>
2025-01-18genksyms: fix 6 shift/reduce conflicts and 5 reduce/reduce conflictsMasahiro Yamada
The genksyms parser has ambiguities in its grammar, which are currently suppressed by a workaround in scripts/genksyms/Makefile. Building genksyms with W=1 generates the following warnings: YACC scripts/genksyms/parse.tab.[ch] scripts/genksyms/parse.y: warning: 9 shift/reduce conflicts [-Wconflicts-sr] scripts/genksyms/parse.y: warning: 5 reduce/reduce conflicts [-Wconflicts-rr] scripts/genksyms/parse.y: note: rerun with option '-Wcounterexamples' to generate conflict counterexamples The comment in the parser describes the current problem: /* This wasn't really a typedef name but an identifier that shadows one. */ Consider the following simple C code: typedef int foo; void my_func(foo foo) {} In the function parameter list (foo foo), the first 'foo' is a type specifier (typedef'ed as 'int'), while the second 'foo' is an identifier. However, the lexer cannot distinguish between the two. Since 'foo' is already typedef'ed, the lexer returns TYPE for both instances, instead of returning IDENT for the second one. To support shadowed identifiers, TYPE can be reduced to either a simple_type_specifier or a direct_abstract_declarator, which creates a grammatical ambiguity. Without analyzing the grammar context, it is very difficult to resolve this correctly. This commit introduces a flag, dont_want_type_specifier, which allows the parser to inform the lexer whether an identifier is expected. When dont_want_type_specifier is true, the type lookup is suppressed, and the lexer returns IDENT regardless of any preceding typedef. After this commit, only 3 shift/reduce conflicts will remain. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nicolas Schier <n.schier@avm.de>
2025-01-18genksyms: reduce type_qualifier directly to decl_specifierMasahiro Yamada
A type_qualifier (const, volatile, etc.) is not a type_specifier. According to K&R [1], a type-qualifier should be directly reduced to a declaration-specifier. <declaration-specifier> ::= <storage-class-specifier> | <type-specifier> | <type-qualifier> [1]: https://cs.wmich.edu/~gupta/teaching/cs4850/sumII06/The%20syntax%20of%20C%20in%20Backus-Naur%20form.htm Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nicolas Schier <n.schier@avm.de>
2025-01-18genksyms: rename cvar_qualifier to type_qualifierMasahiro Yamada
I believe "cvar" stands for "Const, Volatile, Attribute, or Restrict". This is called "type-qualifier" in K&R. [1] Adopt this more generic naming. No functional changes are intended. [1] https://cs.wmich.edu/~gupta/teaching/cs4850/sumII06/The%20syntax%20of%20C%20in%20Backus-Naur%20form.htm Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nicolas Schier <n.schier@avm.de>
2025-01-18genksyms: rename m_abstract_declarator to abstract_declaratorMasahiro Yamada
This is called "abstract-declarator" in K&R. [1] I am not sure what "m_" stands for, but the name is clear enough without it. No functional changes are intended. [1] https://cs.wmich.edu/~gupta/teaching/cs4850/sumII06/The%20syntax%20of%20C%20in%20Backus-Naur%20form.htm Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nicolas Schier <n.schier@avm.de>
2025-01-18kbuild: Fix signing issue for external modulesTorsten Hilbrich
When running the sign script the kernel is within the source directory of external modules. This caused issues when the kernel uses relative paths, like: make[5]: Entering directory '/build/client/devel/kernel/work/linux-2.6' make[6]: Entering directory '/build/client/devel/addmodules/vtx/work/vtx' INSTALL /build/client/devel/addmodules/vtx/_/lib/modules/6.13.0-devel+/extra/vtx.ko SIGN /build/client/devel/addmodules/vtx/_/lib/modules/6.13.0-devel+/extra/vtx.ko /bin/sh: 1: scripts/sign-file: not found DEPMOD /build/client/devel/addmodules/vtx/_/lib/modules/6.13.0-devel+ Working around it by using absolute pathes here. Fixes: 13b25489b6f8 ("kbuild: change working directory to external module directory with M=") Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2025-01-18ARC: migrate to the generic rule for built-in DTBMasahiro Yamada
Commit 654102df2ac2 ("kbuild: add generic support for built-in boot DTBs") introduced generic support for built-in DTBs. Select GENERIC_BUILTIN_DTB to use the generic rule. To keep consistency across architectures, this commit also renames CONFIG_ARC_BUILTIN_DTB_NAME to CONFIG_BUILTIN_DTB_NAME. Now, "nsim_700" is the default value for CONFIG_BUILTIN_DTB_NAME, rather than a fallback in case it is empty. Acked-by: Vineet Gupta <vgupta@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2025-01-18rust: Use gendwarfksyms + extended modversions for CONFIG_MODVERSIONSSami Tolvanen
Previously, two things stopped Rust from using MODVERSIONS: 1. Rust symbols are occasionally too long to be represented in the original versions table 2. Rust types cannot be properly hashed by the existing genksyms approach because: * Looking up type definitions in Rust is more complex than C * Type layout is potentially dependent on the compiler in Rust, not just the source type declaration. CONFIG_EXTENDED_MODVERSIONS addresses the first point, and CONFIG_GENDWARFKSYMS the second. If Rust wants to use MODVERSIONS, allow it to do so by selecting both features. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Co-developed-by: Matthew Maurer <mmaurer@google.com> Signed-off-by: Matthew Maurer <mmaurer@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2025-01-17Merge tag 'devicetree-fixes-for-6.13-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: "Another fix and testcase to avoid the newly added WARN in the case of non-translatable addresses" * tag 'devicetree-fixes-for-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of/address: Fix WARN when attempting translating non-translatable addresses of/unittest: Add test that of_address_to_resource() fails on non-translatable address
generated by cgit (git 2.34.1) at 2025-09-18 07:11:11 +0000