summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-07-21drm/amdgpu: add yellow carp pci id (v2)Aaron Liu
Add Yellow Carp PCI id support. v2: add another DID Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amdgpu: update yellow carp external rev_id handlingAaron Liu
0x1681 has a different external revision id. Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/pm: Support board calibration on aldebaranLijo Lazar
Add support for board power calibration on Aldebaran. Board calibration is done after DC offset calibration. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: change zstate allow msg conditionEric Yang
[Why] PMFW message which previously thought to only control Z9 controls both Z9 and Z10. Also HW design team requested that Z9 must only be supported on eDP due to content protection interop. [How] Change zstate support condition to match updated policy Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Populate dtbclk entries for dcn3.02/3.03Bindu Ramamurthy
[Why] Populate dtbclk values from bwparams for dcn302, dcn303. [How] dtbclk values are fetched from bandwidthparams for all DPM levels and for DPM levels where smu returns 0, previous level values are reported. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Line Buffer changesNevenko Stupar
DCN 3x increased Line buffer size for DCHUB latency hiding, from 4 lines of 4K resolution lines to 5 lines of 4K resolution lines. All Line Buffer can be used as extended memory for P State change latency hiding. The maximum number of lines is increased to 32 lines. Finally, LB_MEMORY_CONFIG_1 (LB memory piece 1) and LB_MEMORY _CONFIG_2 (LB memory piece 2) are not affected, no change in size, only 3 pieces is affected, i.e., when all 3 pieces are used in both LB_MEMORY_CONFIG_0 and LB_MEMORY_CONFIG_3 (for 4:2:0) modes. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Remove MALL function from DCN3.1Mikita Lipski
[why] DCN31 doesn't have MALL in DMUB so to avoid sending unknown commands to DMUB just remove the function pointer. [how] Remove apply_idle_power_optimizations from function pointers structure for DCN31 Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Only set default brightness for OLEDCamille Cho
[Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Camille Cho <Camille.Cho@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Update bounding box for DCN3.1Nicholas Kazlauskas
[Why & How] We're missing a default value for dram_channel_width_bytes in the DCN3.1 SOC bounding box and we don't currently have the interface in place to query the actual value from VBIOS. Put in a hardcoded default until we have the interface in place. Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Query VCO frequency from register for DCN3.1Nicholas Kazlauskas
[Why] Hardcoding the VCO frequency isn't correct since we don't own or control the value. In the case where the hardcode is also missing we can't lightup display. [How] Query from the CLK register instead. Update the DFS frequency to be able to compute the VCO frequency. Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Populate socclk entries for dcn3.02/3.03Bindu Ramamurthy
[Why] Initialize socclk entries in bandwidth params for dcn302, dcn303. [How] Fetch the sockclk values from smu for the DPM levels and for the DPM levels where smu returns 0, previous level values are reported. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Fix max vstartup calculation for modes with bordersNicholas Kazlauskas
[Why] Vertical and horizontal borders in timings are treated as increasing the active area - vblank and hblank actually shrink. Our input into DML does not include these borders so it incorrectly assumes it has more time than available for vstartup and tmdl calculations for some modes with borders. An example of such a timing would be 640x480@72Hz: h_total: 832 h_border_left: 8 h_addressable: 640 h_border_right: 8 h_front_porch: 16 h_sync_width: 40 v_total: 520 v_border_top: 8 v_addressable: 480 v_border_bottom: 8 v_front_porch: 1 v_sync_width: 3 pix_clk_100hz: 315000 [How] Include borders as part of destination vactive/hactive. This change DCN20+ so it has wide impact, but the destination vactive and hactive are only really used for vstartup calculation anyway. Most modes do not have vertical or horizontal borders. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: implement workaround for riommu related hangEric Yang
[Why] During S4/S5/reboot, sometimes riommu invalidation request arrive too early, DCN may be unable to respond to the invalidation request resulting in pstate hang. [How] VBIOS will force allow pstate for riommu invalidation and driver will clear it after powering down display pipes. Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Fix comparison error in dcn21 DMLVictor Lu
[why] A comparison error made it possible to not iterate through all the specified prefetch modes. [how] Correct "<" to "<=" Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Yongqiang Sun <Yongqiang.Sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21Merge tag 'asoc-fix-v5.14-rc2' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.14 A collection of fixes for ASoC that have come in since the merge window, all driver specific. There is a new core feature added for reversing the order of operations when shutting down, this is needed to fix a bug with the AMD Stonyridge platform, and we also tweak the Kconfig to make the SSM2518 driver user selectable so it can be used with generic cards but that requires no actual code changes.
2021-07-21USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stickJohn Keeping
Add the USB serial device ID for the CEL ZigBee EM3588 radio stick. Signed-off-by: John Keeping <john@metanate.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-07-21workqueue: fix UAF in pwq_unbound_release_workfn()Yang Yingliang
I got a UAF report when doing fuzz test: [ 152.880091][ T8030] ================================================================== [ 152.881240][ T8030] BUG: KASAN: use-after-free in pwq_unbound_release_workfn+0x50/0x190 [ 152.882442][ T8030] Read of size 4 at addr ffff88810d31bd00 by task kworker/3:2/8030 [ 152.883578][ T8030] [ 152.883932][ T8030] CPU: 3 PID: 8030 Comm: kworker/3:2 Not tainted 5.13.0+ #249 [ 152.885014][ T8030] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 152.886442][ T8030] Workqueue: events pwq_unbound_release_workfn [ 152.887358][ T8030] Call Trace: [ 152.887837][ T8030] dump_stack_lvl+0x75/0x9b [ 152.888525][ T8030] ? pwq_unbound_release_workfn+0x50/0x190 [ 152.889371][ T8030] print_address_description.constprop.10+0x48/0x70 [ 152.890326][ T8030] ? pwq_unbound_release_workfn+0x50/0x190 [ 152.891163][ T8030] ? pwq_unbound_release_workfn+0x50/0x190 [ 152.891999][ T8030] kasan_report.cold.15+0x82/0xdb [ 152.892740][ T8030] ? pwq_unbound_release_workfn+0x50/0x190 [ 152.893594][ T8030] __asan_load4+0x69/0x90 [ 152.894243][ T8030] pwq_unbound_release_workfn+0x50/0x190 [ 152.895057][ T8030] process_one_work+0x47b/0x890 [ 152.895778][ T8030] worker_thread+0x5c/0x790 [ 152.896439][ T8030] ? process_one_work+0x890/0x890 [ 152.897163][ T8030] kthread+0x223/0x250 [ 152.897747][ T8030] ? set_kthread_struct+0xb0/0xb0 [ 152.898471][ T8030] ret_from_fork+0x1f/0x30 [ 152.899114][ T8030] [ 152.899446][ T8030] Allocated by task 8884: [ 152.900084][ T8030] kasan_save_stack+0x21/0x50 [ 152.900769][ T8030] __kasan_kmalloc+0x88/0xb0 [ 152.901416][ T8030] __kmalloc+0x29c/0x460 [ 152.902014][ T8030] alloc_workqueue+0x111/0x8e0 [ 152.902690][ T8030] __btrfs_alloc_workqueue+0x11e/0x2a0 [ 152.903459][ T8030] btrfs_alloc_workqueue+0x6d/0x1d0 [ 152.904198][ T8030] scrub_workers_get+0x1e8/0x490 [ 152.904929][ T8030] btrfs_scrub_dev+0x1b9/0x9c0 [ 152.905599][ T8030] btrfs_ioctl+0x122c/0x4e50 [ 152.906247][ T8030] __x64_sys_ioctl+0x137/0x190 [ 152.906916][ T8030] do_syscall_64+0x34/0xb0 [ 152.907535][ T8030] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 152.908365][ T8030] [ 152.908688][ T8030] Freed by task 8884: [ 152.909243][ T8030] kasan_save_stack+0x21/0x50 [ 152.909893][ T8030] kasan_set_track+0x20/0x30 [ 152.910541][ T8030] kasan_set_free_info+0x24/0x40 [ 152.911265][ T8030] __kasan_slab_free+0xf7/0x140 [ 152.911964][ T8030] kfree+0x9e/0x3d0 [ 152.912501][ T8030] alloc_workqueue+0x7d7/0x8e0 [ 152.913182][ T8030] __btrfs_alloc_workqueue+0x11e/0x2a0 [ 152.913949][ T8030] btrfs_alloc_workqueue+0x6d/0x1d0 [ 152.914703][ T8030] scrub_workers_get+0x1e8/0x490 [ 152.915402][ T8030] btrfs_scrub_dev+0x1b9/0x9c0 [ 152.916077][ T8030] btrfs_ioctl+0x122c/0x4e50 [ 152.916729][ T8030] __x64_sys_ioctl+0x137/0x190 [ 152.917414][ T8030] do_syscall_64+0x34/0xb0 [ 152.918034][ T8030] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 152.918872][ T8030] [ 152.919203][ T8030] The buggy address belongs to the object at ffff88810d31bc00 [ 152.919203][ T8030] which belongs to the cache kmalloc-512 of size 512 [ 152.921155][ T8030] The buggy address is located 256 bytes inside of [ 152.921155][ T8030] 512-byte region [ffff88810d31bc00, ffff88810d31be00) [ 152.922993][ T8030] The buggy address belongs to the page: [ 152.923800][ T8030] page:ffffea000434c600 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10d318 [ 152.925249][ T8030] head:ffffea000434c600 order:2 compound_mapcount:0 compound_pincount:0 [ 152.926399][ T8030] flags: 0x57ff00000010200(slab|head|node=1|zone=2|lastcpupid=0x7ff) [ 152.927515][ T8030] raw: 057ff00000010200 dead000000000100 dead000000000122 ffff888009c42c80 [ 152.928716][ T8030] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 152.929890][ T8030] page dumped because: kasan: bad access detected [ 152.930759][ T8030] [ 152.931076][ T8030] Memory state around the buggy address: [ 152.931851][ T8030] ffff88810d31bc00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 152.932967][ T8030] ffff88810d31bc80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 152.934068][ T8030] >ffff88810d31bd00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 152.935189][ T8030] ^ [ 152.935763][ T8030] ffff88810d31bd80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 152.936847][ T8030] ffff88810d31be00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 152.937940][ T8030] ================================================================== If apply_wqattrs_prepare() fails in alloc_workqueue(), it will call put_pwq() which invoke a work queue to call pwq_unbound_release_workfn() and use the 'wq'. The 'wq' allocated in alloc_workqueue() will be freed in error path when apply_wqattrs_prepare() fails. So it will lead a UAF. CPU0 CPU1 alloc_workqueue() alloc_and_link_pwqs() apply_wqattrs_prepare() fails apply_wqattrs_cleanup() schedule_work(&pwq->unbound_release_work) kfree(wq) worker_thread() pwq_unbound_release_workfn() <- trigger uaf here If apply_wqattrs_prepare() fails, the new pwq are not linked, it doesn't hold any reference to the 'wq', 'wq' is invalid to access in the worker, so add check pwq if linked to fix this. Fixes: 2d5f0764b526 ("workqueue: split apply_workqueue_attrs() into 3 stages") Cc: stable@vger.kernel.org # v4.2+ Reported-by: Hulk Robot <hulkci@huawei.com> Suggested-by: Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com> Tested-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2021-07-21cgroup1: fix leaked context root causing sporadic NULL deref in LTPPaul Gortmaker
Richard reported sporadic (roughly one in 10 or so) null dereferences and other strange behaviour for a set of automated LTP tests. Things like: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 1516 Comm: umount Not tainted 5.10.0-yocto-standard #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014 RIP: 0010:kernfs_sop_show_path+0x1b/0x60 ...or these others: RIP: 0010:do_mkdirat+0x6a/0xf0 RIP: 0010:d_alloc_parallel+0x98/0x510 RIP: 0010:do_readlinkat+0x86/0x120 There were other less common instances of some kind of a general scribble but the common theme was mount and cgroup and a dubious dentry triggering the NULL dereference. I was only able to reproduce it under qemu by replicating Richard's setup as closely as possible - I never did get it to happen on bare metal, even while keeping everything else the same. In commit 71d883c37e8d ("cgroup_do_mount(): massage calling conventions") we see this as a part of the overall change: -------------- struct cgroup_subsys *ss; - struct dentry *dentry; [...] - dentry = cgroup_do_mount(&cgroup_fs_type, fc->sb_flags, root, - CGROUP_SUPER_MAGIC, ns); [...] - if (percpu_ref_is_dying(&root->cgrp.self.refcnt)) { - struct super_block *sb = dentry->d_sb; - dput(dentry); + ret = cgroup_do_mount(fc, CGROUP_SUPER_MAGIC, ns); + if (!ret && percpu_ref_is_dying(&root->cgrp.self.refcnt)) { + struct super_block *sb = fc->root->d_sb; + dput(fc->root); deactivate_locked_super(sb); msleep(10); return restart_syscall(); } -------------- In changing from the local "*dentry" variable to using fc->root, we now export/leave that dentry pointer in the file context after doing the dput() in the unlikely "is_dying" case. With LTP doing a crazy amount of back to back mount/unmount [testcases/bin/cgroup_regression_5_1.sh] the unlikely becomes slightly likely and then bad things happen. A fix would be to not leave the stale reference in fc->root as follows: --------------                 dput(fc->root); + fc->root = NULL;                 deactivate_locked_super(sb); -------------- ...but then we are just open-coding a duplicate of fc_drop_locked() so we simply use that instead. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Tejun Heo <tj@kernel.org> Cc: Zefan Li <lizefan.x@bytedance.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: stable@vger.kernel.org # v5.1+ Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org> Fixes: 71d883c37e8d ("cgroup_do_mount(): massage calling conventions") Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2021-07-21net: ixp46x: fix ptp build failureArnd Bergmann
The rework of the ixp46x cpu detection left the network driver in a half broken state: drivers/net/ethernet/xscale/ptp_ixp46x.c: In function 'ptp_ixp_init': drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: error: 'IXP4XX_TIMESYNC_BASE_VIRT' undeclared (first use in this function) 290 | (struct ixp46x_ts_regs __iomem *) IXP4XX_TIMESYNC_BASE_VIRT; | ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: note: each undeclared identifier is reported only once for each function it appears in drivers/net/ethernet/xscale/ptp_ixp46x.c: At top level: drivers/net/ethernet/xscale/ptp_ixp46x.c:323:1: error: data definition has no type or storage class [-Werror] 323 | module_init(ptp_ixp_init); I have patches to complete the transition for a future release, but for the moment, add the missing include statements to get it to build again. Fixes: 09aa9aabdcc4 ("soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21tcp: tweak len/truesize ratio for coalesce candidatesEric Dumazet
tcp_grow_window() is using skb->len/skb->truesize to increase tp->rcv_ssthresh which has a direct impact on advertized window sizes. We added TCP coalescing in linux-3.4 & linux-3.5: Instead of storing skbs with one or two MSS in receive queue (or OFO queue), we try to append segments together to reduce memory overhead. High performance network drivers tend to cook skb with 3 parts : 1) sk_buff structure (256 bytes) 2) skb->head contains room to copy headers as needed, and skb_shared_info 3) page fragment(s) containing the ~1514 bytes frame (or more depending on MTU) Once coalesced into a previous skb, 1) and 2) are freed. We can therefore tweak the way we compute len/truesize ratio knowing that skb->truesize is inflated by 1) and 2) soon to be freed. This is done only for in-order skb, or skb coalesced into OFO queue. The result is that low rate flows no longer pay the memory price of having low GRO aggregation factor. Same result for drivers not using GRO. This is critical to allow a big enough receiver window, typically tcp_rmem[2] / 2. We have been using this at Google for about 5 years, it is due time to make it upstream. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21net: bridge: multicast: fix igmp/mld port context null pointer dereferencesNikolay Aleksandrov
With the recent change to use bridge/port multicast context pointers instead of bridge/port I missed to convert two locations which pass the port pointer as-is, but with the new model we need to verify the port context is non-NULL first and retrieve the port from it. The first location is when doing querier selection when a query is received, the second location is when leaving a group. The port context will be null if the packets originated from the bridge device (i.e. from the host). The fix is simple just check if the port context exists and retrieve the port pointer from it. Fixes: adc47037a7d5 ("net: bridge: multicast: use multicast contexts instead of bridge or port") Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21ionic: drop useless check of PCI driver data validityLeon Romanovsky
The driver core will call to .remove callback only if .probe succeeded and it will ensure that driver data has pointer to struct ionic. There is no need to check it again. Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21tcp: avoid indirect call in tcp_new_space()Eric Dumazet
For tcp sockets, sk->sk_write_space is most probably sk_stream_write_space(). Other sk->sk_write_space() calls in TCP are slow path and do not deserve any change. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21net: wwan: iosm: Switch to use module_pci_driver() macroAndy Shevchenko
Eliminate some boilerplate code by using module_pci_driver() instead of init/exit, moving the salient bits from init into probe. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21usb: hso: remove the bailout parameterDongliang Mu
There are two invocation sites of hso_free_net_device. After refactoring hso_create_net_device, this parameter is useless. Remove the bailout in the hso_free_net_device and change the invocation sites of this function. Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21usb: hso: fix error handling code of hso_create_net_deviceDongliang Mu
The current error handling code of hso_create_net_device is hso_free_net_device, no matter which errors lead to. For example, WARNING in hso_free_net_device [1]. Fix this by refactoring the error handling code of hso_create_net_device by handling different errors by different code. [1] https://syzkaller.appspot.com/bug?id=66eff8d49af1b28370ad342787413e35bbe76efe Reported-by: syzbot+44d53c7255bb1aea22d2@syzkaller.appspotmail.com Fixes: 5fcfb6d0bfcd ("hso: fix bailout in error case of probe") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21ibmvnic: Remove the proper scrq flushSukadev Bhattiprolu
Commit 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset") intended to remove the call to ibmvnic_tx_scrq_flush() when the ->resetting flag is true and was tested that way. But during the final rebase to net-next, the hunk got applied to a block few lines below (which happened to have the same diff context) and the wrong call to ibmvnic_tx_scrq_flush() got removed. Fix that by removing the correct ibmvnic_tx_scrq_flush() and restoring the one that was incorrectly removed. Fixes: 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset") Reported-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21Revert "x86/hyperv: fix logical processor creation"Wei Liu
This reverts commit 450605c28d571eddca39a65fdbc1338add44c6d9. Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-07-21i40e: add support for PTP external synchronization clockPiotr Kwapulinski
Add support for external synchronization clock via GPIOs. 1PPS signals are handled via the dedicated 3 GPIOs: SDP3_2, SDP3_3 and GPIO_4. Previously it was not possible to use the external PTP synchronization clock. All possible HW configurations are supported. SDP3_2, SDP3_3, GPIO_4 off, off, off off, in_A, off off, out_A, off off, in_B, off off, out_B, off in_A, off, off in_A, in_B, off in_A, out_B, off out_A, off, off out_A, in_B, off in_B, off, off in_B, in_A, off in_B, out_A, off out_B, off, off out_B, in_A, off off, off, in_A off, out_A, in_A off, in_B, in_A off, out_B, in_A out_A, off, in_A out_A, in_B, in_A in_B, off, in_A in_B, out_A, in_A out_B, off, in_A off, off, out_A off, in_A, out_A off, in_B, out_A off, out_B, out_A in_A, off, out_A in_A, in_B, out_A in_A, out_B, out_A in_B, off, out_A in_B, in_A, out_A out_B, off, out_A out_B, in_A, out_A off, off, in_B off, in_A, in_B off, out_A, in_B off, out_B, in_B in_A, off, in_B in_A, out_B, in_B out_A, off, in_B out_B, off, in_B out_B, in_A, in_B off, off, out_B off, in_A, out_B off, out_A, out_B off, in_B, out_B in_A, off, out_B in_A, in_B, out_B out_A, off, out_B out_A, in_B, out_B in_B, off, out_B in_B, in_A, out_B in_B, out_A, out_B Tested with oscilloscope, 1PPS generator and ts2phc. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Tested-by: Ashish K <ashishx.k@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21Merge branch 'pmtu-esp'David S. Miller
Vadim Fedorenko ays: ==================== Fix PMTU for ESP-in-UDP encapsulation Bug 213669 uncovered regression in PMTU discovery for UDP-encapsulated routes and some incorrect usage in udp tunnel fields. This series fixes problems and also adds such case for selftests v3: - update checking logic to account SCTP use case v2: - remove refactor code that was in first patch - move checking logic to __udp{4,6}_lib_err_encap - add more tests, especially routed configuration ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21selftests: net: add ESP-in-UDP PMTU testVadim Fedorenko
The case of ESP in UDP encapsulation was not covered before. Add cases of local changes of MTU and difference on routed path. Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21drm/i915: Correct the docs for intel_engine_cmd_parserJason Ekstrand
In 93b713304188 ("drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser""), the parameters to intel_engine_cmd_parser() were altered without updating the docs, causing Fi.CI.DOCS to start failing. Fixes: c9d9fdbc108a ("drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser"") Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210720182108.2761496-1-jason@jlekstrand.net Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Added 'Fixes:' tag and corrected the hash for the ancestor] (cherry picked from commit 15eb083bdb561bb4862cd04cd0523e55483e877e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Updated Fixes tag to match fixes branch]
2021-07-21udp: check encap socket in __udp_lib_errVadim Fedorenko
Commit d26796ae5894 ("udp: check udp sock encap_type in __udp_lib_err") added checks for encapsulated sockets but it broke cases when there is no implementation of encap_err_lookup for encapsulation, i.e. ESP in UDP encapsulation. Fix it by calling encap_err_lookup only if socket implements this method otherwise treat it as legal socket. Fixes: d26796ae5894 ("udp: check udp sock encap_type in __udp_lib_err") Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21sctp: update active_key for asoc when old key is being replacedXin Long
syzbot reported a call trace: BUG: KASAN: use-after-free in sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 Call Trace: sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 sctp_set_owner_w net/sctp/socket.c:131 [inline] sctp_sendmsg_to_asoc+0x152e/0x2180 net/sctp/socket.c:1865 sctp_sendmsg+0x103b/0x1d30 net/sctp/socket.c:2027 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:821 sock_sendmsg_nosec net/socket.c:703 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:723 This is an use-after-free issue caused by not updating asoc->shkey after it was replaced in the key list asoc->endpoint_shared_keys, and the old key was freed. This patch is to fix by also updating active_key for asoc when old key is being replaced with a new one. Note that this issue doesn't exist in sctp_auth_del_key_id(), as it's not allowed to delete the active_key from the asoc. Fixes: 1b1e0bc99474 ("sctp: add refcnt support for sh_key") Reported-by: syzbot+b774577370208727d12b@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21driver core: Prevent warning when removing a device link from unregistered ↵Adrian Hunter
consumer sysfs_remove_link() causes a warning if the parent directory does not exist. That can happen if the device link consumer has not been registered. So do not attempt sysfs_remove_link() in that case. Fixes: 287905e68dd29 ("driver core: Expose device link details in sysfs") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # 5.9+ Reviewed-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20210716114408.17320-2-adrian.hunter@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21nvme: set the PRACT bit when using Write Zeroes with T10 PIChristoph Hellwig
When using Write Zeroes on a namespace that has protection information enabled they behavior without the PRACT bit counter-intuitive and will generally lead to validation failures when reading the written blocks. Fix this by always setting the PRACT bit that generates matching PI data on the fly. Fixes: 6e02318eaea5 ("nvme: add support for the Write Zeroes command") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-21net: ipv4: Consolidate ipv4_mtu and ip_dst_mtu_maybe_forwardVadim Fedorenko
Consolidate IPv4 MTU code the same way it is done in IPv6 to have code aligned in both address families Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21net: ipv6: introduce ip6_dst_mtu_maybe_forwardVadim Fedorenko
Replace ip6_dst_mtu_forward with ip6_dst_mtu_maybe_forward and reuse this code in ip6_mtu. Actually these two functions were almost duplicates, this change will simplify the maintaince of mtu calculation code. Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21Merge branch 'ipv6-ioam'David S. Miller
Justin Iurman says: ==================== Support for the IOAM Pre-allocated Trace with IPv6 v5: - Refine types, min/max and default values for new sysctls - Introduce a "_wide" sysctl for each "ioam6_id" sysctl - Add more validation on headers before processing data - RCU for sc <> ns pointers + appropriate accessors - Generic Netlink policies are now per op, not per family anymore - Address other comments/remarks from Jakub (thanks again) - Revert "__packed" to "__attribute__((packed))" for uapi headers - Add tests to cover the functionality added, as requested by David Ahern v4: - Address warnings from checkpatch (ignore errors related to unnamed bitfields in the first patch) - Use of hweight32 (thanks Jakub) - Remove inline keyword from static functions in C files and let the compiler decide what to do (thanks Jakub) v3: - Fix warning "unused label 'out_unregister_genl'" by adding conditional macro - Fix lwtunnel output redirect bug: dst cache useless in this case, use orig_output instead v2: - Fix warning with static for __ioam6_fill_trace_data - Fix sparse warning with __force when casting __be64 to __be32 - Fix unchecked dereference when removing IOAM namespaces or schemas - exthdrs.c: Don't drop by default (now: ignore) to match the act bits "00" - Add control plane support for the inline insertion (lwtunnel) - Provide uapi structures - Use __net_timestamp if skb->tstamp is empty - Add note about the temporary IANA allocation - Remove support for "removable" TLVs - Remove support for virtual/anonymous tunnel decapsulation In-situ Operations, Administration, and Maintenance (IOAM) records operational and telemetry information in a packet while it traverses a path between two points in an IOAM domain. It is defined in draft-ietf-ippm-ioam-data [1]. IOAM data fields can be encapsulated into a variety of protocols. The IPv6 encapsulation is defined in draft-ietf-ippm-ioam-ipv6-options [2], via extension headers. IOAM can be used to complement OAM mechanisms based on e.g. ICMP or other types of probe packets. This patchset implements support for the Pre-allocated Trace, carried by a Hop-by-Hop. Therefore, a new IPv6 Hop-by-Hop TLV option is introduced, see IANA [3]. The three other IOAM options are not included in this patchset (Incremental Trace, Proof-of-Transit and Edge-to-Edge). The main idea behind the IOAM Pre-allocated Trace is that a node pre-allocates some room in packets for IOAM data. Then, each IOAM node on the path will insert its data. There exist several interesting use- cases, e.g. Fast failure detection/isolation or Smart service selection. Another killer use-case is what we have called Cross-Layer Telemetry, see the demo video on its repository [4], that aims to make the entire stack (L2/L3 -> L7) visible for distributed tracing tools (e.g. Jaeger), instead of the current L5 -> L7 limited view. So, basically, this is a nice feature for the Linux Kernel. This patchset also provides support for the control plane part, but only for the inline insertion (host-to-host use case), through lightweight tunnels. Indeed, for in-transit traffic, the solution is to have an IPv6-in-IPv6 encapsulation, which brings some difficulties and still requires a little bit of work and discussion (ie anonymous tunnel decapsulation and multi egress resolution). - Patch 1: IPv6 IOAM headers definition - Patch 2: Data plane support for Pre-allocated Trace - Patch 3: IOAM Generic Netlink API - Patch 4: Support for IOAM injection with lwtunnels - Patch 5: Documentation for new IOAM sysctls - Patch 6: Test for the IOAM insertion with IPv6 [1] https://tools.ietf.org/html/draft-ietf-ippm-ioam-data [2] https://tools.ietf.org/html/draft-ietf-ippm-ioam-ipv6-options [3] https://www.iana.org/assignments/ipv6-parameters/ipv6-parameters.xhtml#ipv6-parameters-2 [4] https://github.com/iurmanj/cross-layer-telemetry ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21rbd: resurrect setting of disk->private_data in rbd_init_disk()Ilya Dryomov
rbd_open() and rbd_release() expect that disk->private_data is set to rbd_dev. Otherwise we hit a NULL pointer dereference when mapping the image. URL: https://tracker.ceph.com/issues/51759 Fixes: 195b1956b85b ("rbd: use blk_mq_alloc_disk and blk_cleanup_disk") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-07-21selftests: net: Test for the IOAM insertion with IPv6Justin Iurman
This test evaluates the IOAM insertion for IPv6 by checking the IOAM data integrity on the receiver. The topology is formed by 3 nodes: Alpha (sender), Beta (router in-between) and Gamma (receiver). An IOAM domain is configured from Alpha to Gamma only, which means not on the reverse path. When Gamma is the destination, Alpha adds an IOAM option (Pre-allocated Trace) inside a Hop-by-hop and fills the trace with its own IOAM data. Beta and Gamma also fill the trace. The IOAM data integrity is checked on Gamma, by comparing with the pre-defined IOAM configuration (see below). +-------------------+ +-------------------+ | | | | | alpha netns | | gamma netns | | | | | | +-------------+ | | +-------------+ | | | veth0 | | | | veth0 | | | | db01::2/64 | | | | db02::2/64 | | | +-------------+ | | +-------------+ | | . | | . | +-------------------+ +-------------------+ . . . . . . +----------------------------------------------------+ | . . | | +-------------+ +-------------+ | | | veth0 | | veth1 | | | | db01::1/64 | ................ | db02::1/64 | | | +-------------+ +-------------+ | | | | beta netns | | | +--------------------------+-------------------------+ ~~~~~~~~~~~~~~~~~~~~~~ | IOAM configuration | ~~~~~~~~~~~~~~~~~~~~~~ Alpha +-----------------------------------------------------------+ | Type | Value | +-----------------------------------------------------------+ | Node ID | 1 | +-----------------------------------------------------------+ | Node Wide ID | 11111111 | +-----------------------------------------------------------+ | Ingress ID | 0xffff (default value) | +-----------------------------------------------------------+ | Ingress Wide ID | 0xffffffff (default value) | +-----------------------------------------------------------+ | Egress ID | 101 | +-----------------------------------------------------------+ | Egress Wide ID | 101101 | +-----------------------------------------------------------+ | Namespace Data | 0xdeadbee0 | +-----------------------------------------------------------+ | Namespace Wide Data | 0xcafec0caf00dc0de | +-----------------------------------------------------------+ | Schema ID | 777 | +-----------------------------------------------------------+ | Schema Data | something that will be 4n-aligned | +-----------------------------------------------------------+ Note: When Gamma is the destination, Alpha adds an IOAM Pre-allocated Trace option inside a Hop-by-hop, where 164 bytes are pre-allocated for the trace, with 123 as the IOAM-Namespace and with 0xfff00200 as the trace type (= all available options at this time). As a result, and based on IOAM configurations here, only both Alpha and Beta should be capable of inserting their IOAM data while Gamma won't have enough space and will set the overflow bit. Beta +-----------------------------------------------------------+ | Type | Value | +-----------------------------------------------------------+ | Node ID | 2 | +-----------------------------------------------------------+ | Node Wide ID | 22222222 | +-----------------------------------------------------------+ | Ingress ID | 201 | +-----------------------------------------------------------+ | Ingress Wide ID | 201201 | +-----------------------------------------------------------+ | Egress ID | 202 | +-----------------------------------------------------------+ | Egress Wide ID | 202202 | +-----------------------------------------------------------+ | Namespace Data | 0xdeadbee1 | +-----------------------------------------------------------+ | Namespace Wide Data | 0xcafec0caf11dc0de | +-----------------------------------------------------------+ | Schema ID | 0xffffff (= None) | +-----------------------------------------------------------+ | Schema Data | | +-----------------------------------------------------------+ Gamma +-----------------------------------------------------------+ | Type | Value | +-----------------------------------------------------------+ | Node ID | 3 | +-----------------------------------------------------------+ | Node Wide ID | 33333333 | +-----------------------------------------------------------+ | Ingress ID | 301 | +-----------------------------------------------------------+ | Ingress Wide ID | 301301 | +-----------------------------------------------------------+ | Egress ID | 0xffff (default value) | +-----------------------------------------------------------+ | Egress Wide ID | 0xffffffff (default value) | +-----------------------------------------------------------+ | Namespace Data | 0xdeadbee2 | +-----------------------------------------------------------+ | Namespace Wide Data | 0xcafec0caf22dc0de | +-----------------------------------------------------------+ | Schema ID | 0xffffff (= None) | +-----------------------------------------------------------+ | Schema Data | | +-----------------------------------------------------------+ Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21ipv6: ioam: Documentation for new IOAM sysctlsJustin Iurman
Add documentation for new IOAM sysctls: - ioam6_id and ioam6_id_wide: two per-namespace sysctls - ioam6_enabled, ioam6_id and ioam6_id_wide: three per-interface sysctls Example of IOAM configuration based on the following simple topology: _____ _____ _____ | | eth0 eth0 | | eth1 eth0 | | | A |.----------.| B |.----------.| C | |_____| |_____| |_____| 1) Node and interface IDs can be configured for IOAM: # IOAM ID of A = 1, IOAM ID of A.eth0 = 11 (A) sysctl -w net.ipv6.ioam6_id=1 (A) sysctl -w net.ipv6.conf.eth0.ioam6_id=11 # IOAM ID of B = 2, IOAM ID of B.eth0 = 21, IOAM ID of B.eth1 = 22 (B) sysctl -w net.ipv6.ioam6_id=2 (B) sysctl -w net.ipv6.conf.eth0.ioam6_id=21 (B) sysctl -w net.ipv6.conf.eth1.ioam6_id=22 # IOAM ID of C = 3, IOAM ID of C.eth0 = 31 (C) sysctl -w net.ipv6.ioam6_id=3 (C) sysctl -w net.ipv6.conf.eth0.ioam6_id=31 Note that "_wide" IDs equivalents can be configured the same way. 2) Each node can be configured to form an IOAM domain. For instance, we allow IOAM from A to C only (not the reverse path), i.e. enable IOAM on ingress for B.eth0 and C.eth0: (B) sysctl -w net.ipv6.conf.eth0.ioam6_enabled=1 (C) sysctl -w net.ipv6.conf.eth0.ioam6_enabled=1 3) An IOAM domain (e.g. ID=123) is defined and made known to each node: (A) ip ioam namespace add 123 (B) ip ioam namespace add 123 (C) ip ioam namespace add 123 4) Finally, an IOAM Pre-allocated Trace can be inserted in traffic sent by A when C (e.g. db02::2) is the destination: (A) ip -6 route add db02::2/128 encap ioam6 trace type 0x800000 ns 123 size 12 dev eth0 Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21ipv6: ioam: Support for IOAM injection with lwtunnelsJustin Iurman
Add support for the IOAM inline insertion (only for the host-to-host use case) which is per-route configured with lightweight tunnels. The target is iproute2 and the patch is ready. It will be posted as soon as this patchset is merged. Here is an overview: $ ip -6 ro ad fc00::1/128 encap ioam6 trace type 0x800000 ns 1 size 12 dev eth0 This example configures an IOAM Pre-allocated Trace option attached to the fc00::1/128 prefix. The IOAM namespace (ns) is 1, the size of the pre-allocated trace data block is 12 octets (size) and only the first IOAM data (bit 0: hop_limit + node id) is included in the trace (type) represented as a bitfield. The reason why the in-transit (IPv6-in-IPv6 encapsulation) use case is not implemented is explained on the patchset cover. Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21ipv6: ioam: IOAM Generic Netlink APIJustin Iurman
Add Generic Netlink commands to allow userspace to configure IOAM namespaces and schemas. The target is iproute2 and the patch is ready. It will be posted as soon as this patchset is merged. Here is an overview: $ ip ioam Usage: ip ioam { COMMAND | help } ip ioam namespace show ip ioam namespace add ID [ data DATA32 ] [ wide DATA64 ] ip ioam namespace del ID ip ioam schema show ip ioam schema add ID DATA ip ioam schema del ID ip ioam namespace set ID schema { ID | none } Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21ipv6: ioam: Data plane support for Pre-allocated TraceJustin Iurman
Implement support for processing the IOAM Pre-allocated Trace with IPv6, see [1] and [2]. Introduce a new IPv6 Hop-by-Hop TLV option, see IANA [3]. A new per-interface sysctl is introduced. The value is a boolean to accept (=1) or ignore (=0, by default) IPv6 IOAM options on ingress for an interface: - net.ipv6.conf.XXX.ioam6_enabled Two other sysctls are introduced to define IOAM IDs, represented by an integer. They are respectively per-namespace and per-interface: - net.ipv6.ioam6_id - net.ipv6.conf.XXX.ioam6_id The value of the first one represents the IOAM ID of the node itself (u32; max and default value = U32_MAX>>8, due to hop limit concatenation) while the other represents the IOAM ID of an interface (u16; max and default value = U16_MAX). Each "ioam6_id" sysctl has a "_wide" equivalent: - net.ipv6.ioam6_id_wide - net.ipv6.conf.XXX.ioam6_id_wide The value of the first one represents the wide IOAM ID of the node itself (u64; max and default value = U64_MAX>>8, due to hop limit concatenation) while the other represents the wide IOAM ID of an interface (u32; max and default value = U32_MAX). The use of short and wide equivalents is not exclusive, a deployment could choose to leverage both. For example, net.ipv6.conf.XXX.ioam6_id (short format) could be an identifier for a physical interface, whereas net.ipv6.conf.XXX.ioam6_id_wide (wide format) could be an identifier for a logical sub-interface. Documentation about new sysctls is provided at the end of this patchset. Two relativistic hash tables are used: one for IOAM namespaces, the other for IOAM schemas. A namespace can only have a single active schema and a schema can only be attached to a single namespace (1:1 relationship). [1] https://tools.ietf.org/html/draft-ietf-ippm-ioam-ipv6-options [2] https://tools.ietf.org/html/draft-ietf-ippm-ioam-data [3] https://www.iana.org/assignments/ipv6-parameters/ipv6-parameters.xhtml#ipv6-parameters-2 Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21uapi: IPv6 IOAM headers definitionJustin Iurman
This patch provides the IPv6 IOAM option header [1] as well as the IOAM Trace header [2]. An IOAM option must be 4n-aligned. Here is an overview of a Hop-by-Hop with an IOAM Trace option: +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Next header | Hdr Ext Len | Padding | Padding | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Option Type | Opt Data Len | Reserved | IOAM Type | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Namespace-ID | NodeLen | Flags | RemainingLen| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | IOAM-Trace-Type | Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<-+ | | | | node data [n] | | | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ D | | a | node data [n-1] | t | | a +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ~ ... ~ S +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ p | | a | node data [1] | c | | e +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | | | node data [0] | | | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<-+ The IOAM option header starts at "Option Type" and ends after "IOAM Type". The IOAM Trace header starts at "Namespace-ID" and ends after "IOAM-Trace-Type/Reserved". IOAM Type: either Pre-allocated Trace (=0), Incremental Trace (=1), Proof-of-Transit (=2) or Edge-to-Edge (=3). Note that both the Pre-allocated Trace and the Incremental Trace look the same. The two others are not implemented. Namespace-ID: IOAM namespace identifier, not to be confused with network namespaces. It adds further context to IOAM options and associated data, and allows devices which are IOAM capable to determine whether IOAM options must be processed or ignored. It can also be used by an operator to distinguish different operational domains or to identify different sets of devices. NodeLen: Length of data added by each node. It depends on the Trace Type. Flags: Only the Overflow (O) flag for now. The O flag is set by a transit node when there are not enough octets left to record its data. RemainingLen: Remaining free space to record data. IOAM-Trace-Type: Bit field where each bit corresponds to a specific kind of IOAM data. See [2] for a detailed list. [1] https://tools.ietf.org/html/draft-ietf-ippm-ioam-ipv6-options [2] https://tools.ietf.org/html/draft-ietf-ippm-ioam-data Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21net: switchdev: recurse into __switchdev_handle_fdb_del_to_deviceVladimir Oltean
The difference between __switchdev_handle_fdb_del_to_device and switchdev_handle_del_to_device is that the former takes an extra orig_dev argument, while the latter starts with dev == orig_dev. We should recurse into the variant that does not lose the orig_dev along the way. This is relevant when deleting FDB entries pointing towards a bridge (dev changes to the lower interfaces, but orig_dev shouldn't). The addition helper already recurses properly, just the deletion one doesn't. Fixes: 8ca07176ab00 ("net: switchdev: introduce a fanout helper for SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21net: switchdev: remove stray semicolon in switchdev_handle_fdb_del_to_device ↵Vladimir Oltean
shim With the semicolon at the end, the compiler sees the shim function as a declaration and not as a definition, and warns: 'switchdev_handle_fdb_del_to_device' declared 'static' but never defined Reported-by: kernel test robot <lkp@intel.com> Fixes: 8ca07176ab00 ("net: switchdev: introduce a fanout helper for SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21net: phy: at803x: finish the phy id checking simplificationVladimir Oltean
The blamed commit was probably not tested on net-next, since it did not refactor the extra phy id check introduced in commit b856150c8098 ("net: phy: at803x: mask 1000 Base-X link mode"). Fixes: 8887ca5474bd ("net: phy: at803x: simplify custom phy id matching") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21r8169: Avoid duplicate sysfs entry creation errorSayanta Pattanayak
When registering the MDIO bus for a r8169 device, we use the PCI bus/device specifier as a (seemingly) unique device identifier. However the very same BDF number can be used on another PCI segment, which makes the driver fail probing: [ 27.544136] r8169 0002:07:00.0: enabling device (0000 -> 0003) [ 27.559734] sysfs: cannot create duplicate filename '/class/mdio_bus/r8169-700' .... [ 27.684858] libphy: mii_bus r8169-700 failed to register [ 27.695602] r8169: probe of 0002:07:00.0 failed with error -22 Add the segment number to the device name to make it more unique. This fixes operation on ARM N1SDP boards, with two boards connected together to form an SMP system, and all on-board devices showing up twice, just on different PCI segments. A similar issue would occur on large systems with many PCI slots and multiple RTL8169 NICs. Fixes: f1e911d5d0dfd ("r8169: add basic phylib support") Signed-off-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com> [Andre: expand commit message, use pci_domain_nr()] Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 17:27:03 +0000