| Age | Commit message (Collapse) | Author |
|---|
|
i225 devices have only one phy->type: copper. There is no point checking
phy->type during the igc_has_link method from the watchdog that
invoked every 2 seconds.
This patch comes to clean up these pointless checkings.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
i225 devices have only one PHY vendor. There is no point checking
_I_PHY_ID during the link establishment and auto-negotiation process.
This patch comes to clean up these pointless checkings.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Ensure that the adapter->q_vector[MAX_Q_VECTORS] array isn't accessed
beyond its size. It was fixed by using a local variable num_q_vectors
as a limit for loop index, and ensure that num_q_vectors is not bigger
than MAX_Q_VECTORS.
Suggested-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There is a spelling mistake in the comment block.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Minor fixes to allow debug prints more readable.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add devices IDs for the next LOM generations that will be
available on the next Intel Client platforms
This patch provides the initial support for these devices
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add devices IDs for the next LOM generations that will be
available on the next Intel Client platform (Lunar Lake)
This patch provides the initial support for these devices
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
After transferring the MAC-PHY interface to the SMBus set the PHY
to S0ix low power idle mode.
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Per guidance from the CSME architecture team, it may take
up to 1 second for unconfiguring dynamic power gating mode.
Practically it can take more time. Wait up to 2.5 seconds to indicate
dynamic power gating exit from the S0ix configuration. Detect
scenarios that take more than 1 second but less than 2.5 seconds
will emit warning message.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
On the corporate system, the driver will ask from the CSME
(manageability engine) to perform device settings are required
to allow S0ix residency.
This patch provides initial support.
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
propagation)'
Alan Maguire says:
====================
This series aims to resolve further issues with the BTF typed data
dumping interfaces in libbpf.
Compilation failures with use of __int128 on 32-bit platforms were
reported [1]. As a result, the use of __int128 in libbpf typed data
dumping is replaced with __u64 usage for bitfield manipulations.
In the case of 128-bit integer values, they are simply split into
two 64-bit hex values for display (patch 1).
Tests are added for __int128 display in patch 2, using conditional
compilation to avoid problems with a lack of __int128 support.
Patch 3 resolves an issue Andrii noted about error propagation
when handling enum data display.
More followup work is required to ensure multi-dimensional char array
display works correctly.
[1] https://lore.kernel.org/bpf/1626362126-27775-1-git-send-email-alan.maguire@oracle.com/T/#mc2cb023acfd6c3cd0b661e385787b76bb757430d
Changes since v1:
- added error handling for bitfield size > 64 bits by changing function
signature for bitfield retrieval to return an int error value and to set
bitfield value via a __u64 * argument (Andrii)
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
When retrieving the enum value associated with typed data during
"is data zero?" checking in btf_dump_type_data_check_zero(), the
return value of btf_dump_get_enum_value() is not passed to the caller
if the function returns a non-zero (error) value. Currently, 0
is returned if the function returns an error. We should instead
propagate the error to the caller.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626770993-11073-4-git-send-email-alan.maguire@oracle.com
|
|
Add tests for __int128 display for platforms that support it.
__int128s are dumped as hex values.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626770993-11073-3-git-send-email-alan.maguire@oracle.com
|
|
__int128 is not supported for some 32-bit platforms (arm and i386).
__int128 was used in carrying out computations on bitfields which
aid display, but the same calculations could be done with __u64
with the small effect of not supporting 128-bit bitfields.
With these changes, a big-endian issue with casting 128-bit integers
to 64-bit for enum bitfields is solved also, as we now use 64-bit
integers for bitfield calculations.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626770993-11073-2-git-send-email-alan.maguire@oracle.com
|
|
When run test_tc_tunnel.sh, it complains following error
ipip
encap 192.168.1.1 to 192.168.1.2, type ipip, mac none len 100
test basic connectivity
nc: cannot use -p and -l
nc man page has:
-l Listen for an incoming connection rather than initiating
a connection to a remote host.Cannot be used together with
any of the options -psxz. Additionally, any timeouts specified
with the -w option are ignored.
Correct nc in server_listen().
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210719223022.66681-1-vincent.mc.li@gmail.com
|
|
During some transfers the bus can still be busy when an interrupt is
received. Commit 763778cd7926 ("i2c: mpc: Restore reread of I2C status
register") attempted to address this by re-reading MPC_I2C_SR once but
that just made it less likely to happen without actually preventing it.
Instead of a single re-read, poll with a timeout so that the bus is given
enough time to settle but a genuine stuck SCL is still noticed.
Fixes: 1538d82f4647 ("i2c: mpc: Interrupt driven transfer")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current
at24 fixes for v5.14
- fix a problem with repeating labels not getting a device id
|
|
UDP socket support was added recently so testing UDP insert failure is no
longer correct and causes test_maps failure. The fix is easy though, we
simply need to test that UDP is correctly added instead of blocked.
Fixes: 122e6c79efe1c ("sock_map: Update sock type checks for UDP")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210720184832.452430-1-john.fastabend@gmail.com
|
|
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
arch/s390/kernel/perf_cpum_cf.c:748:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Fixes: a029a4eab39e ("s390/cpumf: Allow concurrent access for CPU Measurement Counter Facility")
CC: Thomas Richter <tmricht@linux.ibm.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The DMA code section of the decompressor must be compiled with expolines
if Spectre V2 mitigation has been enabled for the decompressed kernel.
This is required because although the decompressor's image contains
the DMA code section, it is handed over to the decompressed kernel for use.
Because the DMA code is already slow w/o expolines, use expolines always
regardless whether the decompressed kernel is using them or not. This
simplifies the DMA code by dropping the conditional compilation of
expolines.
Fixes: bf72630130c2 ("s390: use proper expoline sections for .dma code")
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
If MDSs aren't available while mounting a filesystem, the session state
will transition from SESSION_OPENING to SESSION_CLOSING. And in that
scenario check_session_state() will be called from delayed_work() and
trigger this WARN.
Avoid this by only WARNing after a session has already been established
(i.e., the s_ttl will be different from 0).
Fixes: 62575e270f66 ("ceph: check session state after bumping session->s_seq")
Signed-off-by: Luis Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Currently rbd_quiesce_lock() holds lock_rwsem for read while blocking
on releasing_wait completion. On the I/O completion side, each image
request also needs to take lock_rwsem for read. Because rw_semaphore
implementation doesn't allow new readers after a writer has indicated
interest in the lock, this can result in a deadlock if something that
needs to take lock_rwsem for write gets involved. For example:
1. watch error occurs
2. rbd_watch_errcb() takes lock_rwsem for write, clears owner_cid and
releases lock_rwsem
3. after reestablishing the watch, rbd_reregister_watch() takes
lock_rwsem for write and calls rbd_reacquire_lock()
4. rbd_quiesce_lock() downgrades lock_rwsem to for read and blocks on
releasing_wait until running_list becomes empty
5. another watch error occurs
6. rbd_watch_errcb() blocks trying to take lock_rwsem for write
7. no in-flight image request can complete and delete itself from
running_list because lock_rwsem won't be granted anymore
A similar scenario can occur with "lock has been acquired" and "lock
has been released" notification handers which also take lock_rwsem for
write to update owner_cid.
We don't actually get anything useful from sitting on lock_rwsem in
rbd_quiesce_lock() -- owner_cid updates certainly don't need to be
synchronized with. In fact the whole owner_cid tracking logic could
probably be removed from the kernel client because we don't support
proxied maintenance operations.
Cc: stable@vger.kernel.org # 5.3+
URL: https://tracker.ceph.com/issues/42757
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Robin Geuze <robin.geuze@nl.team.blue>
|
|
Skipping the "lock has been released" notification if the lock owner
is not what we expect based on owner_cid can lead to I/O hangs.
One example is our own notifications: because owner_cid is cleared
in rbd_unlock(), when we get our own notification it is processed as
unexpected/duplicate and maybe_kick_acquire() isn't called. If a peer
that requested the lock then doesn't go through with acquiring it,
I/O requests that came in while the lock was being quiesced would
be stalled until another I/O request is submitted and kicks acquire
from rbd_img_exclusive_lock().
This makes the comment in rbd_release_lock() actually true: prior to
this change the canceled work was being requeued in response to the
"lock has been acquired" notification from rbd_handle_acquired_lock().
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Robin Geuze <robin.geuze@nl.team.blue>
|
|
On some Intel NUC10 variants, codec reports AC_JACK_PORT_NONE as
pin default config for all pins. This results in broken audio.
Add a quirk to force connectivity.
BugLink: https://github.com/clearlinux/distribution/issues/2396
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210720153216.2200938-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The at803x driver contains a function, at803x_match_phy_id(), which
tests whether the PHY ID matches the value passed, comparing phy_id
with phydev->phy_id and testing all bits that in the driver's mask.
This is the same test that is used to match the driver, with phy_id
replaced with the driver specified ID, phydev->drv->phy_id.
Hence, we already know the value of the bits being tested if we look
at phydev->drv->phy_id directly, and we do not require a complicated
test to check them. Test directly against phydev->drv->phy_id instead.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 6206b7981a36476f4695d661ae139f7db36a802d.
That patch added additional spin_{un}lock_bh(), which was harmless
but pointless. The orginal code path has guaranteed the pair of
spin_{un}lock_bh().
We'd better revert it before we find the exact root cause of the
bug_on mentioned in that patch.
Fixes: 6206b7981a36 ("qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()")
Cc: David S. Miller <davem@davemloft.net>
Cc: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While running the self-tests on a KASAN enabled kernel, I observed a
slab-out-of-bounds splat very similar to the one reported in
commit 821bbf79fe46 ("ipv6: Fix KASAN: slab-out-of-bounds Read in
fib6_nh_flush_exceptions").
We additionally need to take care of fib6_metrics initialization
failure when the caller provides an nh.
The fix is similar, explicitly free the route instead of calling
fib6_info_release on a half-initialized object.
Fixes: f88d8ea67fbdb ("ipv6: Plumb support for nexthop object in a fib6_info")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The character sequence ??! is a trigraph and causes the following
clang warning:
drivers/net/ethernet/marvell/mvneta.c:2604:39: warning: trigraph ignored [-Wtrigraphs]
Clean this by replacing it with single ?.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The character sequence ??) is a trigraph and causes the following
clang warning:
drivers/atm/idt77252.c:3544:35: warning: trigraph ignored [-Wtrigraphs]
Clean this by replacing it with single ?.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds the possibility to configure the RGMII RX/TX clock skew via
devicetree.
Simply set phy mode to "rgmii-id", "rgmii-rxid" or "rgmii-txid" and add
the "rx-internal-delay-ps" or "tx-internal-delay-ps" property to the
devicetree.
Furthermore, a warning is now issued if the phy mode is configured to
"rgmii" and an internal delay is set in the phy (e.g. by pin-strapping),
as in the dp83867 driver.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Augment the phy link debug prints with the pause state.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The documentation for Armada 8040 says:
Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ...
When <PortType> = 1 (1000BASE-X) this field must be set to 1.
We presently ignore whether userspace requests autonegotiation or not
through the ethtool ksettings interface. However, we have some network
interfaces that wish to do this. To offer a consistent API across
network interfaces, deny the ability to disable autonegotiation on
mvpp2 hardware when in 1000BASE-X and 2500BASE-X.
This means the only way to switch between 2500BASE-X and 1000BASE-X
on SFPs that support this will be:
# ethtool -s ethX advertise 0x20000006000 # 1000BASE-X Pause AsymPause
# ethtool -s ethX advertise 0xe000 # 2500BASE-X Pause AsymPause
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Marek Behún <kabel@kernel.org>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The documentation for Armada 38x says:
Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ...
When <PortType> = 1 (1000BASE-X) this field must be set to 1.
We presently ignore whether userspace requests autonegotiation or not
through the ethtool ksettings interface. However, we have some network
interfaces that wish to do this. To offer a consistent API across
network interfaces, deny the ability to disable autonegotiation on
mvneta hardware when in 1000BASE-X and 2500BASE-X.
This means the only way to switch between 2500BASE-X and 1000BASE-X
on SFPs that support this will be:
# ethtool -s ethX advertise 0x20000002000 # 1000BASE-X Pause
# ethtool -s ethX advertise 0xa000 # 2500BASE-X Pause
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set SUPPORTED_FIBRE to mac_dev->if_support. It allows proper usage of
PHYs with optical/fiber support.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Root in init user namespace can modify /proc/sys/net/ipv4/ip_forward
without CAP_NET_ADMIN, this doesn't follow the principle of
capabilities. For example, let's take a look at netdev_store(),
root can't modify netdev attribute without CAP_NET_ADMIN.
So let's keep the consistency of permission check logic.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently tcf_skbmod_act() assumes that packets use Ethernet as their L2
protocol, which is not always the case. As an example, for CAN devices:
$ ip link add dev vcan0 type vcan
$ ip link set up vcan0
$ tc qdisc add dev vcan0 root handle 1: htb
$ tc filter add dev vcan0 parent 1: protocol ip prio 10 \
matchall action skbmod swap mac
Doing the above silently corrupts all the packets. Do not perform skbmod
actions for non-Ethernet packets.
Fixes: 86da71b57383 ("net_sched: Introduce skbmod action")
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alex Elder says:
====================
arm64: dts: qcom: DTS updates
This series updates some IPA-related DT nodes.
Newer versions of IPA do not require an interconnect between IPA
and SoC internal memory. The first patch updates the DT binding
to reflect this.
The second patch adds IPA information to "sc7280.dtsi", using only
two interconnects. It includes the definition of the reserved
memory area used to hold IPA firmware.
The last patch defines the reserved IPA firmware memory area in
"sc7180.dtsi".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define the reserved memory space used for IPA firmware for the
Qualcomm SC7180 SoC.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add IPA-related nodes and definitions to "sc7280.dtsi", including
the reserved memory area used for AP-based IPA firmware loading.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On some newer SoCs, the interconnect between IPA and SoC internal
memory (imem) is not used. Reflect this in the binding by moving
the definition of the "imem" interconnect to the end and defining
minItems to be 2 for both the interconnects and interconnect-names
properties.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently three interconnects are defined for the Qualcomm SC7280
SoC, but this was based on a misunderstanding. There should only be
two interconnects defined: one between the IPA and system memory;
and another between the AP and IPA config space. The bandwidths
defined for the memory and config interconnects do not match what I
understand to be proper values, so update these.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The following warning is observed when running 'make dtbs_check':
Documentation/devicetree/bindings/net/fsl,fec.yaml:85:7: [warning] wrong indentation: expected 8 but found 6 (indentation)
Fix the indentation accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vladimir Oltean says:
====================
Fan out FDB entries pointing towards the bridge to all switchdev member ports
The "DSA RX filtering" series has added some important support for
interpreting addresses towards the bridge device as host addresses and
installing them as FDB entries towards the CPU port, but it does not
cover all circumstances and needs further work.
To be precise, the mechanism introduced in that series only works as
long as the ports are fairly static and no port joins or leaves the
bridge once the configuration is done. If any port leaves, host FDB
entries that were installed during runtime (for example the user changes
the MAC address of the bridge device) will be prematurely deleted,
resulting in a broken setup.
I see this work as targeted for "net-next" because technically it was
not supposed to work. Also, there are still corner cases and holes to be
plugged. For example, today, FDB entries on foreign interfaces are not
covered by br_fdb_replay(), which means that there are cases where some
host addresses are either lost, or never deleted by DSA. That will be
resolved once more work gets accepted, in particular the "Allow
forwarding for the software bridge data path to be offloaded to capable
devices" series, which moves the br_fdb_replay() call to the bridge core
and therefore would be required to solve the problem in a generic way
for every switchdev driver and not just for DSA.
These patches also pave the way for a cleaner implementation for FDB
entries pointing towards a LAG upper interface in DSA (that code needs
only to be added, nothing changed), however this is not done here.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using the new fan-out helper for FDB entries installed on the software
bridge, we can install host addresses with the proper refcount on the
CPU port, such that this case:
ip link set swp0 master br0
ip link set swp1 master br0
ip link set swp2 master br0
ip link set swp3 master br0
ip link set br0 address 00:01:02:03:04:05
ip link set swp3 nomaster
works properly and the br0 address remains installed as a host entry
with refcount 3 instead of getting deleted.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently DSA has an issue with FDB entries pointing towards the bridge
in the presence of br_fdb_replay() being called at port join and leave
time.
In particular, each bridge port will ask for a replay for the FDB
entries pointing towards the bridge when it joins, and for another
replay when it leaves.
This means that for example, a bridge with 4 switch ports will notify
DSA 4 times of the bridge MAC address.
But if the MAC address of the bridge changes during the normal runtime
of the system, the bridge notifies switchdev [ once ] of the deletion of
the old MAC address as a local FDB towards the bridge, and of the
insertion [ again once ] of the new MAC address as a local FDB.
This is a problem, because DSA keeps the old MAC address as a host FDB
entry with refcount 4 (4 ports asked for it using br_fdb_replay). So the
old MAC address will not be deleted. Additionally, the new MAC address
will only be installed with refcount 1, and when the first switch port
leaves the bridge (leaving 3 others as still members), it will delete
with it the new MAC address of the bridge from the local FDB entries
kept by DSA (because the br_fdb_replay call on deletion will bring the
entry's refcount from 1 to 0).
So the problem, really, is that the number of br_fdb_replay() calls is
not matched with the refcount that a host FDB is offloaded to DSA during
normal runtime.
An elegant way to solve the problem would be to make the switchdev
notification emitted by br_fdb_change_mac_address() result in a host FDB
kept by DSA which has a refcount exactly equal to the number of ports
under that bridge. Then, no matter how many DSA ports join or leave that
bridge, the host FDB entry will always be deleted when there are exactly
zero remaining DSA switch ports members of the bridge.
To implement the proposed solution, we remember that the switchdev
objects and port attributes have some helpers provided by switchdev,
which can be optionally called by drivers:
switchdev_handle_port_obj_{add,del} and switchdev_handle_port_attr_set.
These helpers:
- fan out a switchdev object/attribute emitted for the bridge towards
all the lower interfaces that pass the check_cb().
- fan out a switchdev object/attribute emitted for a bridge port that is
a LAG towards all the lower interfaces that pass the check_cb().
In other words, this is the model we need for the FDB events too:
something that will keep an FDB entry emitted towards a physical port as
it is, but translate an FDB entry emitted towards the bridge into N FDB
entries, one per physical port.
Of course, there are many differences between fanning out a switchdev
object (VLAN) on 3 lower interfaces of a LAG and fanning out an FDB
entry on 3 lower interfaces of a LAG. Intuitively, an FDB entry towards
a LAG should be treated specially, because FDB entries are unicast, we
can't just install the same address towards 3 destinations. It is
imaginable that drivers might want to treat this case specifically, so
create some methods for this case and do not recurse into the LAG lower
ports, just the bridge ports.
DSA also listens for FDB entries on "foreign" interfaces, aka interfaces
bridged with us which are not part of our hardware domain: think an
Ethernet switch bridged with a Wi-Fi AP. For those addresses, DSA
installs host FDB entries. However, there we have the same problem
(those host FDB entries are installed with a refcount of only 1) and an
even bigger one which we did not have with FDB entries towards the
bridge:
br_fdb_replay() is currently not called for FDB entries on foreign
interfaces, just for the physical port and for the bridge itself.
So when DSA sniffs an address learned by the software bridge towards a
foreign interface like an e1000 port, and then that e1000 leaves the
bridge, DSA remains with the dangling host FDB address. That will be
fixed separately by replaying all FDB entries and not just the ones
towards the port and the bridge.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is a bit difficult to understand what DSA checks when it tries to
avoid installing dynamically learned addresses on foreign interfaces as
local host addresses, so create a generic switchdev helper that can be
reused and is generally more readable.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes my earlier patch which broke vlan unaware bridges.
The IVL bit now only gets set for vid's larger than 1.
Fixes: 11d8d98cbeef ("mt7530 fix mt7530_fdb_write vid missing ivl bit")
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Subbaraya Sundeep says:
====================
octeontx2-af: Introduce DMAC based switching
With this patch set packets can be switched between
all CGX mapped PFs and VFs in the system based on
the DMAC addresses. To implement this:
AF allocates high priority rules from top entry(0) in MCAM.
Rules are allocated for all the CGX mapped PFs and VFs though
they are not active and with no NIXLFs attached.
Rules for a PF/VF will be enabled only after they are brought up.
Two rules one for TX and one for RX are allocated for each PF/VF.
A packet sent from a PF/VF with a destination mac of another
PF/VF will be hit by TX rule and sent to LBK channel 63. The
same returned packet will be hit by RX rule whose action is
to forward packet to PF/VF with that destination mac.
Implementation of this for 98xx is tricky since there are
two NIX blocks and till now a PF/VF can install rule for
an NIX0/1 interface only if it is mapped to corresponding NIX0/1 block.
Hence Tx rules are modified such that TX interface in MCAM
entry can be either NIX0-TX or NIX1-TX.
Testing:
1. Create two VFs over PF1(on NIX0) and assign two VFs to two VMs
2. Assign ip addresses to two VFs in VMs and PF2(on NIX1) in host.
3. Assign static arp entries in two VMs and PF2.
4. Ping between VMs and host PF2.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
drm: Return -ENOTTY for non-drm ioctls
Return -ENOTTY from drm_ioctl() when userspace passes in a cmd number
which doesn't relate to the drm subsystem.
Glibc uses the TCGETS ioctl to implement isatty(), and without this
change isatty() returns it incorrectly returns true for drm devices.
To test run this command:
$ if [ -t 0 ]; then echo is a tty; fi < /dev/dri/card0
which shows "is a tty" without this patch.
This may also modify memory which the userspace application is not
expecting.
Signed-off-by: Charles Baylis <cb-kernel@fishzet.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YPG3IBlzaMhfPqCr@stando.fishzet.co.uk
|
