summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-04drm/i915: Explain the magic numbers for AUX SYNC/precharge lengthVille Syrjälä
Replace the hardcoded final numbers in the AUX SYNC/precharge setup, and derive those from numbers from the (e)DP specs. The new functions can serve as the single point of truth for the number of SYNC pulses we use. Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230329172434.18744-2-ville.syrjala@linux.intel.com Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
2023-04-04drm/i915: Fix fast wake AUX sync lenVille Syrjälä
Fast wake should use 8 SYNC pulses for the preamble and 10-16 SYNC pulses for the precharge. Reduce our fast wake SYNC count to match the maximum value. We also use the maximum precharge length for normal AUX transactions. Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230329172434.18744-1-ville.syrjala@linux.intel.com Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
2023-04-03drm/i915/hwmon: Use 0 to designate disabled PL1 power limitAshutosh Dixit
On ATSM the PL1 limit is disabled at power up. The previous uapi assumed that the PL1 limit is always enabled and therefore did not have a notion of a disabled PL1 limit. This results in erroneous PL1 limit values when the PL1 limit is disabled. For example at power up, the disabled ATSM PL1 limit was previously shown as 0 which means a low PL1 limit whereas the limit being disabled actually implies a high effective PL1 limit value. To get round this problem, the PL1 limit uapi is expanded to include a special value 0 to designate a disabled PL1 limit. A read value of 0 means that the PL1 power limit is disabled, writing 0 disables the limit. The link between this patch and the bugs mentioned below is as follows: * Because on ATSM the PL1 power limit is disabled on power up and there were no means to enable it, we previously implemented the means to enable the limit when the PL1 hwmon entry (power1_max) was written to. * Now there is a IGT igt@i915_hwmon@hwmon_write which (a) reads orig value from all hwmon sysfs (b) does a bunch of random writes and finally (c) restores the orig value read. On ATSM since the orig value is 0, when the IGT restores the 0 value, the PL1 limit is now enabled with a value of 0. * PL1 limit of 0 implies a low PL1 limit which causes GPU freq to fall to 100 MHz. This causes GuC FW load and several IGT's to start timing out and gives rise to these Intel CI bugs. After this patch, writing 0 would disable the PL1 limit instead of enabling it, avoiding the freq drop issue. v2: Add explanation for bugs mentioned below (Rodrigo) v3: Eliminate race during PL1 disable and verify (Tvrtko) Change return to -ENODEV if verify fails (Tvrtko) Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8062 Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8060 Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230401024146.1826092-1-ashutosh.dixit@intel.com
2023-04-03drm/i915/i915_vma: Provide one missing param and demote another ↵Lee Jones
non-kerneldoc header Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/i915_vma.c:756: warning: Function parameter or member 'ww' not described in 'i915_vma_insert' drivers/gpu/drm/i915/i915_vma.c:1744: warning: Function parameter or member 'vma' not described in 'i915_vma_destroy_locked' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-17-lee@kernel.org
2023-04-03drm/i915/gt/uc/intel_guc_hwconfig: Demote a few non-conforming kerneldoc headersLee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.c:112: warning: Function parameter or member 'gt' not described in 'guc_hwconfig_init' drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.c:112: warning: expecting prototype for intel_guc_hwconfig_init(). Prototype was for guc_hwconfig_init() instead drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.c:145: warning: Function parameter or member 'gt' not described in 'intel_gt_init_hwconfig' drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.c:158: warning: Function parameter or member 'gt' not described in 'intel_gt_fini_hwconfig' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-16-lee@kernel.org
2023-04-03drm/i915/i915_gem: Provide function names to complete the expected kerneldoc ↵Lee Jones
format Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/i915_gem.c:447: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/gpu/drm/i915/i915_gem.c:536: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/gpu/drm/i915/i915_gem.c:726: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/gpu/drm/i915/i915_gem.c:811: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> [Jani: fix i915_gem_sw_finish_ioctl while applying] Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-15-lee@kernel.org
2023-04-03drm/i915/gem/i915_gem_object: Demote non-kerneldoc header with no param ↵Lee Jones
descriptions Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gem/i915_gem_object.c:887: warning: Function parameter or member 'obj' not described in 'i915_gem_object_has_unknown_state' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-14-lee@kernel.org
2023-04-03drm/i915/gem/i915_gem_wait: Provide function name to validate the kerneldoc ↵Lee Jones
header Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gem/i915_gem_wait.c:164: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-13-lee@kernel.org
2023-04-03drm/i915/gem/i915_gem_ttm_move: Provide a couple of missing descriptions for ↵Lee Jones
'num_pages' and 'ctx' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gem/i915_gem_ttm_move.c:272: warning: Function parameter or member 'num_pages' not described in 'i915_ttm_memcpy_arg' drivers/gpu/drm/i915/gem/i915_gem_ttm_move.c:569: warning: Function parameter or member 'ctx' not described in 'i915_ttm_move' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-12-lee@kernel.org
2023-04-03drm/i915/gem/i915_gem_ttm: Demote half-filled kerneldocLee Jones
Hopefully someone knowledgable will follow-up to complete it. Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1292: warning: Function parameter or member 'offset' not described in '__i915_gem_ttm_object_init' drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1292: warning: Function parameter or member 'page_size' not described in '__i915_gem_ttm_object_init' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-11-lee@kernel.org
2023-04-03drm/i915/gem/i915_gem_ttm_pm: Provide a couple of missing descriptions for ↵Lee Jones
'flags' and remove some superfluous ones Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:156: warning: Function parameter or member 'flags' not described in 'i915_ttm_backup_region' drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:156: warning: Excess function parameter 'allow_gpu' description in 'i915_ttm_backup_region' drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:156: warning: Excess function parameter 'backup_pinned' description in 'i915_ttm_backup_region' drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:223: warning: Function parameter or member 'flags' not described in 'i915_ttm_restore_region' drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:223: warning: Excess function parameter 'allow_gpu' description in 'i915_ttm_restore_region' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-10-lee@kernel.org
2023-04-03drm/i915/gem/i915_gem_domain: Provide function names to complete proper ↵Lee Jones
kerneldoc Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gem/i915_gem_domain.c:119: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/gpu/drm/i915/gem/i915_gem_domain.c:180: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/gpu/drm/i915/gem/i915_gem_domain.c:265: warning: expecting prototype for Changes the cache(). Prototype was for i915_gem_object_set_cache_level() instead drivers/gpu/drm/i915/gem/i915_gem_domain.c:470: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/gpu/drm/i915/gem/i915_gem_domain.c:514: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-9-lee@kernel.org
2023-04-03drm/i915/gem/i915_gem_create: Provide the function names for proper ↵Lee Jones
kerneldoc headers Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gem/i915_gem_create.c:147: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/gpu/drm/i915/gem/i915_gem_create.c:218: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/gpu/drm/i915/gem/i915_gem_create.c:402: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Matthew Auld <matthew.auld@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> [Jani: fixed i915_gem_create_ext_ioctl while applying] Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-8-lee@kernel.org
2023-04-03drm/i915/gt/intel_rps: Demote a kerneldoc abuse for ips_ping_for_i915_load()Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/gt/intel_rps.c:2646: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-7-lee@kernel.org
2023-04-03drm/i915/intel_region_ttm: Provide missing description for 'offset' paramLee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/intel_region_ttm.c:201: warning: Function parameter or member 'offset' not described in 'intel_region_ttm_resource_alloc' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-3-lee@kernel.org
2023-04-03drm/i915/i915_scatterlist: Fix kerneldoc formatting issue - missing '@'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/i915_scatterlist.c:62: warning: Function parameter or member 'size' not described in 'i915_refct_sgt_init' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-2-lee@kernel.org
2023-04-03dt-bindings: display: Start the info graphics with HS/VS changeMarek Vasut
The VS signal change is synchronized to HS signal change, start the info graphics with that event, instead of having that event occur in the middle of it. Scope trace of DPI bus with HS/VS active HIGH looks as follows: ________________...__ VS...___/__ __ \______... HS...___/ \_______/ \__...__/ \___... ^ ^ | | | Used to start here -' | '--- Start info graphics here Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230221200407.16531-1-marex@denx.de
2023-04-03drm/bridge: tc358767: Enable DSI burst mode, LPM, non-continuous clockMarek Vasut
The TC358767/TC358867/TC9595 are capable of DSI burst mode, which is more energy efficient than the non-burst modes. Make use of it. The TC358767/TC358867/TC9595 are capable of DSI non-continuous clock, since it sources the internal PLL clock from external clock source. The DSI non-continuous clock further reduces power utilization. The TC358767/TC358867/TC9595 may use DSI LPM for command transmissions, make sure this is configured correctly in the DSI mode flags. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221016003632.406468-1-marex@denx.de
2023-04-03drm/i915/display/intel_wm: Fix a little doc-rot in intel_update_watermarks()Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/display/intel_wm.c:46: warning: Function parameter or member 'i915' not described in 'intel_update_watermarks' drivers/gpu/drm/i915/display/intel_wm.c:46: warning: Excess function parameter 'dev_priv' description in 'intel_update_watermarks' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-20-lee@kernel.org
2023-04-03drm/i915/display/intel_display_power: Fix incorrectly documented function ↵Lee Jones
__intel_display_power_put_async() Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/display/intel_display_power.c:712: warning: expecting prototype for intel_display_power_put_async(). Prototype was for __intel_display_power_put_async() instead Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Imre Deak <imre.deak@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-18-lee@kernel.org
2023-04-03drm/i915/display/intel_display_debugfs: Fix incorrect param naming for ↵Lee Jones
'intel_connector' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/display/intel_display_debugfs.c:1668: warning: Function parameter or member 'intel_connector' not described in 'intel_connector_debugfs_add' drivers/gpu/drm/i915/display/intel_display_debugfs.c:1668: warning: Excess function parameter 'connector' description in 'intel_connector_debugfs_add' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-5-lee@kernel.org
2023-04-03drm/vram-helper: turn on PRIME import/exportSimon Ser
We don't populate drm_driver.gem_prime_import_sg_table so only DMA-BUFs exported from our own device can be imported. We don't populate drm_gem_object_funcs.get_sg_table so DMA-BUFs cannot be imported into another device. Still, this is useful to user-space to share buffers between processes and between API boundaries (e.g. wlroots hard-requires PRIME import/export support). v2: expand commit message Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Hans de Goede <hdegoede@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230302143502.500661-2-contact@emersion.fr
2023-04-03drm/prime: reject DMA-BUF attach when get_sg_table is missingSimon Ser
drm_gem_map_dma_buf() requires drm_gem_object_funcs.get_sg_table to be implemented, or else WARNs. Allow drivers to leave this hook unimplemented to implement purely local DMA-BUFs (ie, DMA-BUFs which cannot be imported anywhere else but the device which allocated them). In that case, reject imports to other devices in drm_gem_map_attach(). v2: new patch v3: use ENOSYS Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Hans de Goede <hdegoede@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230302143502.500661-1-contact@emersion.fr
2023-04-03drm/bridge: lt8912b: Fix DSI Video ModeFrancesco Dolcini
LT8912 DSI port supports only Non-Burst mode video operation with Sync Events and continuous clock on clock lane, correct dsi mode flags according to that removing MIPI_DSI_MODE_VIDEO_BURST flag. Cc: <stable@vger.kernel.org> Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230330093131.424828-1-francesco@dolcini.it
2023-04-03drm/i915: Remove the encoder update_prepare()/complete() hooksImre Deak
The encoder update_prepare()/complete() hooks were added to hold a TC port link reference for all outputs in the atomic state around the whole modeset enable sequence - thus locking the ports' TC mode - and set the TBT/DP-alt PLL type corresponding to the current TC mode. Since nothing depends on the PLL selection before/after then encoder's pre_pll_enable/post_pll_disable hooks are called, the above steps can be moved to these hooks, so do that and remove the update_prepare()/complete() hooks. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-30-imre.deak@intel.com
2023-04-03drm/i915: Remove TC PHY disconnect workaroundImre Deak
After the previous patch the workaround for a TC PHY hang issue is not required any more, remove it. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-29-imre.deak@intel.com
2023-04-03drm/i915: Disable DPLLs before disconnecting the TC PHYImre Deak
Bspec requires disabling the DPLLs on TC ports before disconnecting the port's PHY. Add a post_pll_disable encoder hook and move the call to disconnect the port's PHY from the post_disable hook to the new hook. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-28-imre.deak@intel.com
2023-04-03drm/i915: Move shared DPLL disabling into CRTC disable hookImre Deak
The spec requires disabling the PLL on TC ports before disconnecting the port's PHY. Prepare for that by moving the PLL disabling to the CRTC disable hook, while disconnecting the PHY will be moved to the post_pll_disable() encoder hook in the next patch. v2: Move the call from intel_crtc_disable_noatomic() as well. Reviewed-by: Mika Kahola <mika.kahola@intel.com> # v1 Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-27-imre.deak@intel.com
2023-04-03drm/i915/adlp/tc: Align the connect/disconnect PHY sequence with bspecImre Deak
Bspec has updated the TC connect/disconnect sequences, add the required platform hooks for these. The difference wrt. the old sequence is the order of taking the PHY ownership - while holding a port power reference this requires - and blocking the TC-cold power state. Bspec: 49294 Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-26-imre.deak@intel.com
2023-04-03drm/i915/tc: Don't connect the PHY in intel_tc_port_connected()Imre Deak
Connecting the PHY for connector probing - also blocking TC-cold - isn't required and has some overhead. Taking only the mutex is sufficient, so do that. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-25-imre.deak@intel.com
2023-04-03drm/i915/tc: Get power ref for reading the HPD live status registerImre Deak
Enable the power required for the HPD live status register access instead of depending on the caller blocking the TC-cold power state (during HW readout and connector probing). A follow up patch will remove connecting/disconnecting the PHY around connector probing, so querying the HPD status can happen in this case without TC-cold being blocked. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-24-imre.deak@intel.com
2023-04-03drm/i915/adlp/tc: Use the DE HPD ISR register for hotplug detectionImre Deak
The spec says to use the CPU ISR registers for DP-alt/TBT HPD detection on ADLP, so do that instead of using the related IOM/TCSS registers. Bspec: 55480, 55482, 49212, 49305 Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-23-imre.deak@intel.com
2023-04-03drm/i915/tc: Add TC PHY hook to init the PHYImre Deak
Add a hook for platform specific PHY initialization. Move the detection of modular FIAs to the TGL handler, skipping this on ADLP+ where the FIAs are always modular, not requiring a detection. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-22-imre.deak@intel.com
2023-04-03drm/i915/tc: Add asserts in TC PHY hooks that the required power is onImre Deak
Add an assert to each TC PHY hook that their required power domain is enabled. While at it add a comment describing the domains used on each platform and TC mode. v2: Fix non kernel-doc multiline comments. (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-21-imre.deak@intel.com
2023-04-03drm/i915/tc: Add TC PHY hook to get the TC-cold blocking power domainImre Deak
Instead of the corresponding if ladder, add a TC PHY hook to get the platform and TC mode specific power domain used for blocking the TC-cold power state. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-20-imre.deak@intel.com
2023-04-03drm/i915/tc: Drop tc_cold_block()/unblock()'s power domain parameterImre Deak
Simplify tc_cold_block()/unblock() by dropping their power domain parameter. The power domain depends on the current TC mode, which - after the previous patch - can't change while the PHY is connected, holding a TC-cold-off power domain reference. Based on this the domain can be deducted from the current TC mode instead of having to pass this as a parameter. Blocking TC-cold for the PHY HW readout happens before the current TC mode is determined, so here the initial power domain must be still manually passed. For debugging still keep track of the domain used for tc_cold_block() and verify that it remained the same until tc_cold_unblock(). While at it rename tc_cold_get_power_domain() to tc_phy_cold_off_domain(), reflecting the name of platform specific hook added in the next patch. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-19-imre.deak@intel.com
2023-04-03drm/i915/tc: Remove redundant wakeref=0 check from unblock_tc_cold()Imre Deak
After the previous patch unblock_tc_cold() will not be called in a disconnected mode, so the wakeref passed to it will be always non-zero. Remove the redundant check. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-18-imre.deak@intel.com
2023-04-03drm/i915/tc: Block/unblock TC-cold in the PHY connect/disconnect hooksImre Deak
Move blocking/unblocking the TC-cold power state to the platform specific PHY connect / disconnect hooks. This allows for adjusting the connect/disconnect sequence as required for each platform. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-17-imre.deak@intel.com
2023-04-03drm/i915/tc: Check TC mode instead of the VBT legacy flagImre Deak
After the previous patch the TC mode in the connect/disconnect functions is always in sync with the VBT legacy port flag, so for consistency with the rest of the function check the TC mode instead of the VBT flag. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-16-imre.deak@intel.com
2023-04-03drm/i915/tc: Fix up the legacy VBT flag only in disconnected modeImre Deak
A follow-up patch simplifies the tc_cold_block()/unblock() functions, dropping the power domain parameter. For this it must be ensured that the power domain - which depends on the actual TC mode and so the VBT legacy port flag - can't change while the PHY is in a connected state and accordingly TC-cold is blocked. Make this so, by fixing up the VBT legacy flag only in the disconnected TC mode, instead of whenever the HPD state is retrieved. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-15-imre.deak@intel.com
2023-04-03drm/i915/tc: Add TC PHY hooks to connect/disconnect the PHYImre Deak
Add TC PHY hooks to connect/disconnect the PHY. A follow-up patch will add the ADLP specific hooks for these. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-14-imre.deak@intel.com
2023-04-03drm/i915/tc: Factor out tc_phy_verify_legacy_or_dp_alt_mode()Imre Deak
Factor out a function verifying the PHY connected state in legacy or DP-alt mode. This is common to all platforms, which can be reused in platform specific connect hooks added in follow-up patches. No functional changes. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-13-imre.deak@intel.com
2023-04-03drm/i915/tc: Add generic TC PHY connect/disconnect handlersImre Deak
Add generic handlers to connect/disconnect a PHY. Setting the TC mode to the target mode deducted from the HPD state and - if connecting to this mode fails - falling back to connecting to the default (TBT) mode are common to all platforms; move the logic for this from the ICL specific connect / disconnect handlers to the generic ones. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-12-imre.deak@intel.com
2023-04-03drm/i915/tc: Add TC PHY hook to read out the PHY HW stateImre Deak
Add a TC PHY hook to read out the PHY HW state on each platform, move the common parts to the generic helper. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-11-imre.deak@intel.com
2023-04-03drm/i915/tc: Add TC PHY hooks to get the PHY ready/owned stateImre Deak
Add TC PHY hooks to get the PHY ready/owned state on each platform, replacing the corresponding if ladder. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-10-imre.deak@intel.com
2023-04-03drm/i915/tc: Add TC PHY hook to get the PHY HPD live statusImre Deak
Add a table of TC PHY hooks which can be used to call platform specific TC PHY handlers, replacing the corresponding if ladders. Add the hook to retrieve the PHY's HPD live status. Move the common part fixing up the VBT legacy port flag to the generic helper. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-9-imre.deak@intel.com
2023-04-03drm/i915/tc: Move the intel_tc_port struct declaration to intel_tc.cImre Deak
Move the intel_tc_port struct to intel_tc.c for better isolation. This requires allocating the struct dynamically. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-8-imre.deak@intel.com
2023-04-03drm/i915/tc: Check for TC PHY explicitly in intel_tc_port_fia_max_lane_count()Imre Deak
Check explicitly if the port passed to intel_tc_port_fia_max_lane_count() has a TC PHY, instead of relying on the default TC mode value set for non-TC PHY ports. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-7-imre.deak@intel.com
2023-04-03drm/i915/tc: Move TC port fields to a new intel_tc_port structImre Deak
Move the TC port specific fields from intel_digital_port to a new intel_tc_port struct. Pass an intel_tc_port pointer to all static functions in intel_tc.c keeping dig_port accessible for these via a pointer stored in the new struct. The next patch will allocate the intel_tc_port dynamically, allowing moving the struct definition to intel_tc.c. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-6-imre.deak@intel.com
2023-04-03drm/i915/tc: Use the tc_phy prefix for all TC PHY functionsImre Deak
For consistency use the tc_phy prefix for all TC PHY functions. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-5-imre.deak@intel.com
generated by cgit (git 2.34.1) at 2025-09-23 08:25:08 +0000