summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-03-19Merge tag 'tegra-for-6.15-firmware' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers firmware: tegra: Changes for v6.15-rc1 Not much to this except for a simple typofix. * tag 'tegra-for-6.15-firmware' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: firmware: tegra: bpmp: Fix typo in bpmp-abi.h Link: https://lore.kernel.org/r/20250307162332.3451523-2-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'tegra-for-6.15-soc' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers soc/tegra: Changes for v6.15-rc1 A simple cleanup patch to use str_yes_no() instead of an open-coded version. * tag 'tegra-for-6.15-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: pmc: Use str_enable_disable-like helpers Link: https://lore.kernel.org/r/20250307162332.3451523-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'at91-soc-6.15' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/arm Microchip AT91 SoC updates for v6.15 This update includes: - SoC driver support for Microchip SAMA7D65 - power management support for Microchip SAMA7D65 - power management fixes - documentation fixes * tag 'at91-soc-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: pm: Enable ULP0/ULP1 for SAMA7D65 ARM: at91: pm: Add Backup mode for SAMA7D65 ARM: at91: pm: add DT compatible support for sama7d65 ARM: at91: pm: fix at91_suspend_finish for ZQ calibration dt-bindings: ARM: at91: add Calao USB boards dt-bindings: ARM: at91: make separate entry for Olimex board ARM: at91: Add Support in SoC driver for SAMA7D65 dt-bindings: atmel-sysreg: Add SAMA7D65 Chip ID Link: https://lore.kernel.org/r/20250312173755.975074-2-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'imx-soc-6.15' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/arm i.MX SoC changes for 6.15: - Mark imx53_suspend_sz as __maybe_unused to fix a possible build warning * tag 'imx-soc-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: mark imx53_suspend_sz as unused Link: https://lore.kernel.org/r/20250312074005.663165-2-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'qcom-arm64-defconfig-for-6.15' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig Qualcomm Arm64 defconfig updates for v6.15 Explicitly enable the DRM_DISPLAY_CONNECTOR module, as this is used by a variety of boards. Enable retimer and redriver drivers used in the USB configuration of a variety of Qualcomm X Elite-based devices. Enable the NSS clock controller driver for IPQ9574, the new Iris video encoder/decoder driver and it's clock controller, as well as the QCM2290 GPU clocck ontroller. * tag 'qcom-arm64-defconfig-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: Enable USB retimer and redriver arm64: defconfig: Build NSS Clock Controller driver for IPQ9574 arm64: defconfig: enable Qualcomm IRIS & VIDEOCC_8550 as module arm64: defconfig: enable DRM_DISPLAY_CONNECTOR as a module arm64: defconfig: Enable Qualcomm QCM2290 GPU clock controller Link: https://lore.kernel.org/r/20250319144354.2281720-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'ti-k3-config-for-v6.15' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/defconfig TI K3 defconfig updates for v6.15 - Enable Support for SPI NAND flashes on AM62Ax/J721s2 and other boards - HSR protocol support for AM65/AM64 ICSSG based multi-port ethernet - Greybus modules to support CC1352P7 chips on BeaglePlay * tag 'ti-k3-config-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: arm64: defconfig: Enable SPI NAND flashes arm64: defconfig: Enable HSR protocol driver arm64: defconfig: Enable gb_beagleplay arm64: defconfig: Enable TISCI Interrupt Router and Aggregator Link: https://lore.kernel.org/r/dec6ccc4-76df-47c3-8622-2c08035eff3e@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'v6.15-rockchip-defconfig64-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/defconfig Enabling of the HDMI-receiver driver and new UFS storage driver. * tag 'v6.15-rockchip-defconfig64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: defconfig: Enable Synopsys HDMI receiver arm64: defconfig: Enable Rockchip UFS host driver Link: https://lore.kernel.org/r/3415370.aeNJFYEL58@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19sched/debug: Remove CONFIG_SCHED_DEBUGIngo Molnar
For more than a decade, CONFIG_SCHED_DEBUG=y has been enabled in all the major Linux distributions: /boot/config-6.11.0-19-generic:CONFIG_SCHED_DEBUG=y The reason is that while originally CONFIG_SCHED_DEBUG started out as a debugging feature, over the years (decades ...) it has grown various bits of statistics, instrumentation and control knobs that are useful for sysadmin and general software development purposes as well. But within the kernel we still pretend that there's a choice, and sometimes code that is seemingly 'debug only' creates overhead that should be optimized in reality. So make it all official and make CONFIG_SCHED_DEBUG unconditional. Now that all uses of CONFIG_SCHED_DEBUG are removed from the code by previous patches, remove the Kconfig option as well. Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Segall <bsegall@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250317104257.3496611-6-mingo@kernel.org
2025-03-19sched/debug: Remove CONFIG_SCHED_DEBUG from self-test config filesIngo Molnar
We leave most of the defconfigs alone (there's over 70 of them), but let's remove CONFIG_SCHED_DEBUG from the scheduler self-test Kconfig files. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Segall <bsegall@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/Z9szt3MpQmQ56TRd@gmail.com
2025-03-19sched/debug, Documentation: Remove (most) CONFIG_SCHED_DEBUG references from ↵Ingo Molnar
documentation Since it's enabled unconditionally now, remove all references to it. (Left out languages I cannot read.) Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Segall <bsegall@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250317104257.3496611-5-mingo@kernel.org
2025-03-19sched/debug: Make CONFIG_SCHED_DEBUG functionality unconditionalIngo Molnar
All the big Linux distros enable CONFIG_SCHED_DEBUG, because the various features it provides help not just with kernel development, but with system administration and user-space software development as well. Reflect this reality and enable this functionality unconditionally. Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Segall <bsegall@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250317104257.3496611-4-mingo@kernel.org
2025-03-19sched/debug: Make 'const_debug' tunables unconditional __read_mostlyIngo Molnar
With CONFIG_SCHED_DEBUG becoming unconditional, remove the extra 'const_debug' indirection towards __read_mostly. Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Segall <bsegall@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250317104257.3496611-3-mingo@kernel.org
2025-03-19sched/debug: Change SCHED_WARN_ON() to WARN_ON_ONCE()Ingo Molnar
The scheduler has this special SCHED_WARN() facility that depends on CONFIG_SCHED_DEBUG. Since CONFIG_SCHED_DEBUG is getting removed, convert SCHED_WARN() to WARN_ON_ONCE(). Note that the warning output isn't 100% equivalent: #define SCHED_WARN_ON(x) WARN_ONCE(x, #x) Because SCHED_WARN_ON() would output the 'x' condition as well, while WARN_ONCE() will only show a backtrace. Hopefully these are rare enough to not really matter. If it does, we should probably introduce a new WARN_ON() variant that outputs the condition in stringified form, or improve WARN_ON() itself. Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Segall <bsegall@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250317104257.3496611-2-mingo@kernel.org
2025-03-19Merge tag 'hisi-arm64-dt-for-6.15' of ↵Arnd Bergmann
https://github.com/hisilicon/linux-hisi into soc/dt ARM64: DT: HiSilicon ARM64 DT updates for v6.15 - Add property to the ETM nodes for fixing CPU idle states * tag 'hisi-arm64-dt-for-6.15' of https://github.com/hisilicon/linux-hisi: arm64: dts: hi3660: Add property for fixing CPUIdle Link: https://lore.kernel.org/r/67D968A9.7080504@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'riscv-dt-for-v6.15' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt RISC-V Devicetrees for v6.15 Starfive: All changes for jh7110-based boards including the removal of a dac that does not exist and the addition of usb3 support on the star64 board and pcie on the framework mainboard. Microchip: Update pcie reg properties to fix a mistake originally describing them. Here rather than in fixes, since the driver maintains support for the old format. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: starfive: jh7110-pine64-star64: enable USB 3.0 port riscv: dts: starfive: jh7110: pciephy0 USB 3.0 configuration registers riscv: dts: starfive: fml13v01: enable pcie1 riscv: dts: starfive: remove non-existent dac from jh7110 riscv: dts: starfive: Unify regulator naming scheme riscv: dts: microchip: update pcie reg properties to new format Link: https://lore.kernel.org/r/20250318-favorite-presuming-bf2fcf55bf6a@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'omap-for-v6.15/dt-signed' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt ARM: dts: misc. OMAP updates for v6.15 * tag 'omap-for-v6.15/dt-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap: ARM: dts: omap4-panda-a4: Add missing model and compatible properties dt-bindings: omap: Add TI Pandaboard A4 variant ARM: dts: ti/omap: omap4-serial: fix interrupts syntax ARM: dts: ti: omap: Align GPIO hog name with bindings Link: https://lore.kernel.org/r/7hiko7qzud.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19x86/mm: Only do broadcast flush from reclaim if pages were unmappedRik van Riel
Track whether pages were unmapped from any MM (even ones with a currently empty mm_cpumask) by the reclaim code, to figure out whether or not broadcast TLB flush should be done when reclaim finishes. The reason any MM must be tracked, and not only ones contributing to the tlbbatch cpumask, is that broadcast ASIDs are expected to be kept up to date even on CPUs where the MM is not currently active. This change allows reclaim to avoid doing TLB flushes when only clean page cache pages and/or slab memory were reclaimed, which is fairly common. ( This is a simpler alternative to the code that was in my INVLPGB series before, and it seems to capture most of the benefit due to how common it is to reclaim only page cache. ) Signed-off-by: Rik van Riel <riel@surriel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250319132520.6b10ad90@fangorn
2025-03-19block/blk-iocost: ensure 'ret' is set on errorJens Axboe
In case blkg_conf_open_bdev_frozen() fails, ioc_qos_write() jumps to the error path without assigning a value to 'ret'. Ensure that it inherits the error from the passed back error value. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202503200454.QWpwKeJu-lkp@intel.com/ Fixes: 9730763f4756 ("block: correct locking order for protecting blk-wbt parameters") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-19Merge tag 'riscv-sophgo-dt-for-v6.15' of https://github.com/sophgo/linux ↵Arnd Bergmann
into soc/dt RISC-V Devicetrees for v6.15 Sophgo: Add pwm controller support for SG2042. Add pwm-fan & cooling maps for Milk-V Pioneer. Updated MAINTAINERS info for SOPHGO DEVICETREES and DRIVERS. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * tag 'riscv-sophgo-dt-for-v6.15' of https://github.com/sophgo/linux: riscv: sophgo: dts: add cooling maps for Milk-V Pioneer riscv: sophgo: dts: add pwm-fan for Milk-V Pioneer MAINTAINERS: update info for SOPHGO DEVICETREES and DRIVERS riscv: sophgo: dts: add pwm controller for SG2042 SoC Link: https://lore.kernel.org/r/PN0PR01MB10393CEC71B623E0A779E7393FEDF2@PN0PR01MB10393.INDPRD01.PROD.OUTLOOK.COM Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'mvebu-dt64-6.15-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt64 for 6.15 (part 1) device tree clean-up fomr DT maintainers * tag 'mvebu-dt64-6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: Use preferred node names for "simple-bus" arm64: dts: marvell: Drop unused CP11X_TYPE define arm64: dts: marvell: Move arch timer and pmu nodes to top-level ARM: dts: marvell: armada: Align GPIO hog name with bindings ARM: dts: marvell: kirkwood-openrd: Align GPIO hog name with bindings arm64: dts: marvell: armada-8040: Align GPIO hog name with bindings arm64: dts: marvell: Add missing board compatible for IEI-Puzzle-M801 arm64: dts: marvell: Fix missing/incorrect "marvell,armada3710" compatible arm64: dts: marvell: Drop incomplete root compatible/model properties dt-bindings: marvell: armada-7k-8k: Add missing 7040 and 8040 board compatibles dt-bindings: marvell: armada-7k-8k: Move Armada 8KPlus to schema dt-bindings: marvell: armada-37xx: Add glinet,gl-mv1000 compatible Link: https://lore.kernel.org/r/87wmco99xv.fsf@BLaptop.bootlin.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'v6.15-rockchip-dts64-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New peripheral the sdhci controller on rk3528. Enablement of hdmi and hdmi audio on a number of additional boards. Better handling for scmi shared memory on rk3568 and a fix for the used SCMI clock ids on rk3576. As well as some fixes that were a bit late for trying to stuff them into 6.14 at this late stage of the cycle. * tag 'v6.15-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0 arm64: dts: rockchip: Fix PWM pinctrl names arm64: dts: rockchip: fix RK3576 SCMI clock IDs dt-bindings: clock: rk3576: add SCMI clocks arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7 arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C arm64: dts: rockchip: Add SDHCI controller for RK3528 arm64: dts: rockchip: Remove bluetooth node from rock-3a arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory arm64: dts: rockchip: Add AP6275P wireless support to ArmSoM Sige7 arm64: dts: rockchip: Enable HDMI audio outputs for Orange Pi 5 Plus arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Plus arm64: dts: rockchip: Enable HDMI audio outputs for Orange Pi 5 Max arm64: dts: rockchip: Enable HDMI0 audio output for Orange Pi 5/5B Link: https://lore.kernel.org/r/23866869.6Emhk5qWAg@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'zynq-dt-for-6.15' of https://github.com/Xilinx/linux-xlnx into soc/dtArnd Bergmann
arm64: Zynq DT changes for 6.15 - Align platforms with dt-schema - Describe QSPI * tag 'zynq-dt-for-6.15' of https://github.com/Xilinx/linux-xlnx: ARM: zynq: Do not define address/size-cells for nand-controller ARM: zynq: Remove ethernet0 alias from Microzed ARM: zynq: Add sdhci to alias node ARM: zynq: Enable QSPIs on platforms ARM: zynq: Fix fpga region DT nodes name ARM: zynq: Rename i2c?-gpio to i2c?-gpio-grp ARM: zynq: Define rtc alias on zc702/zc706 ARM: zynq: Point via nvmem0 alias to eeprom on zc702/zc706 ARM: zynq: Define u-boot bootscrip addr via DT ARM: zynq: Wire smcc with nand/nor memories on zc770 platform ARM: zynq: Mark boot-phase-specific device nodes ARM: zynq: DT: List OCM memory for all platforms ARM: zynq: Remove deprecated device_type property ARM: zynq: Replace 'io-standard' with 'power-source' property Link: https://lore.kernel.org/r/CAHTX3d+DZo3thrakBf=QCq91QFeChoizuhVa6oBBj9E+sdEXAQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'zynqmp-dt-for-6.14' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
soc/dt arm64: ZynqMP DT changes for 6.15 - Align clock nodes with DT binding - Add the first VN-X Versal NET board - Move constants out of DT bindings * tag 'zynqmp-dt-for-6.14' of https://github.com/Xilinx/linux-xlnx: dt-bindings: xilinx: Deprecate header with firmware constants arm64: zynqmp: Use DT header for firmware constants arm64: versal-net: Add description for b2197-00 revA board dt-bindings: soc: Add new VN-X board description based on Versal NET arm64: zynqmp: add clock-output-names property in clock nodes Link: https://lore.kernel.org/r/CAHTX3d+u1VmxP4vm0peQS-ST7o0BuCpKUPRVCSLMfAAb=eV3Xg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'sunxi-dt-for-6.15' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner device tree changes for 6.15 - New board support: NetCube Systems Kumquat - Enable USB and LED on Anbernic RG35XX - Fix reboot GPIO detection logic on Anbernic RG35XX - Disable (non-existent) battery thermistor on Anbernic RG35XX - Add CPU OPP table for A100 * tag 'sunxi-dt-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a100: Add CPU Operating Performance Points table arm64: dts: allwinner: rg35xx: Add no-thermistor property for battery arm64: dts: allwinner: h700: Add USB Host for RG35XX-H arm64: dts: allwinner: h700: Add LED1 for Anbernic RG35XX arm64: dts: allwinner: h700: Set cpusldo to always-on for RG35XX ARM: dts: sunxi: add support for NetCube Systems Kumquat ARM: dts: sunxi: add uart1_pe pinctrl for sun8i-v3s dt-bindings: arm: sunxi: Add NetCube Systems Kumquat board dt-bindings: vendor-prefixes: Add NetCube Systems Austria name Link: https://lore.kernel.org/r/Z9LTOHJDY2p0lNG0@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'at91-dt-6.15' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip AT91 device tree updates for v6.15 This update includes: - more controllers enabled for SAMA7D65 SoC (DMA, reset controller, shutdown controller, RTC, watchdog) - power monitor device enabled for SAMA7D65 Curiosity board - device tree cleanups * tag 'at91-dt-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: microchip: sama7g5: add ADC hw trigger edge type ARM: dts: microchip: sama7d65: Add watchdog for sama7d65 ARM: dts: microchip: sama7d65: Enable shutdown controller ARM: dts: microchip: sama7d65: Add SFRBU support to sama7d65 ARM: dts: microchip: sama7d65: Add RTC support for sama7d65 ARM: dts: microchip: sama7d65: Add Shutdown controller support ARM: dts: microchip: sama7d65: Add Reset Controller to sama7d65 SoC ARM: dts: microchip: fix faulty ohci/ehci node names ARM: dts: microchip: usb_a9263: fix wrong vendor ARM: dts: microchip: sama7d65: Enable DMAs ARM: dts: microchip: sama7d65: Add DMAs to sama7d65 SoC ARM: dts: microchip: sama7d65: Add chipID for sama7d65 ARM: dts: microchip: sama7d65_curiosity: Add power monitor support ARM: dts: microchip: sama7d65: Add flexcom 10 node ARM: dts: at91: usb_a9g20_lpw: use proper mmc node name ARM: dts: at91: calao_usb: fix button nodes ARM: dts: at91: use correct vendor name for Calao boards ARM: dts: at91: calao_usb: remove heartbeat for User LEDs ARM: dts: at91: calao_usb: fix wrong polarity for LED Link: https://lore.kernel.org/r/20250312173755.975074-1-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19Merge tag 'stm32-dt-for-v6.15-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.15, round 1 Highlights: ---------- - MPU: - STM32MP13: - Add thermal support. - Add Priva E-Measuringbox board support based on sTM32MP133C SoC. It embeds Ethernet RMII with TI phy, SDCard, eMMC and some sensors. - Add support for DHCOR SoM and DHSBC rev.200 board: TPM interrupts and gpio reset + LDO2/LDO5 support. - STMP32MP15: - Add new Octavo support: LXA FairyTux 2 based on OSD32MP153C SiP. It contains eMMC for storage, a gigabit Ethernet, a CAN bus and a RS485 transceiver. - Add Plymovent AQM board based on STM32MP151 SoC. It embeds: ETH RMII, WLAN, BT, Sensors (CO2, PM, pressure), Audio (I2S), Storage (SDCard, eMMC). - STM32MP25: - Add STM32MP257F Discovery board: It embeds a STM32MP257FAL SoC, with 4GB of LPDDR4, 2*USB typeA, 1*USB3 typeC, 1*ETH, wifi/BT combo, DSI HDMI, LVDS connector ... - Introduce STM32MP23 SoC and add STM32MP235F Discovery board: It embeds a STM32MP235FAK SoC, with 4GB of LPDDR4, 2*USB typeA, 1*USB3 typeC, 1*ETH, wifi/BT combo, DSI HDMI, LVDS connector ... - Introduce STM32MP21 SoC and STM32MP215F discovery board: It embeds a STM32MP235FAN SoC, with 2GB of LPDDR4, 1*USB2 peripheral bus powered typeC, 1*ETH, wifi/BT combo, LCD 18bit connector, CSI camera connector, ... * tag 'stm32-dt-for-v6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (26 commits) arm64: dts: st: add stm32mp215f-dk board support dt-bindings: stm32: document stm32mp215f-dk board arm64: dts: st: introduce stm32mp21 SoCs family arm64: dts: st: add stm32mp235f-dk board support dt-bindings: stm32: document stm32mp235f-dk board arm64: dts: st: introduce stm32mp23 SoCs family dt-bindings: stm32: add STM32MP21 and STM32MP23 compatibles for syscon arm64: Kconfig: expand STM32 Armv8 SoC with STM32MP21/STM32MP23 SoCs family arm64: dts: st: add stm32mp257f-dk board support dt-bindings: stm32: document stm32mp257f-dk board ARM: dts: stm32: Add Plymovent AQM devicetree ARM: dts: stm32: Add pinmux groups for Plymovent AQM board dt-bindings: arm: stm32: Add Plymovent AQM board dt-bindings: sound: convert ICS-43432 binding to YAML ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC rev.200 board ARM: dts: stm32: use IRQ_TYPE_EDGE_FALLING on stm32mp157c-dk2 ARM: dts: stm32: add usr3 LED node to stm32f769-disco ARM: dts: stm32: rename LEDs nodes for stm32f769-disco ARM: dts: stm32: add push button to stm32f746 Discovery board ARM: dts: stm32: add led to stm32f746 Discovery board ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19perf/x86/intel, x86/cpu: Replace Pentium 4 model checks with VFM onesSohil Mehta
Introduce a name for an old Pentium 4 model and replace the x86_model checks with VFM ones. This gets rid of one of the last remaining Intel-specific x86_model checks. Signed-off-by: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250318223828.2945651-3-sohil.mehta@intel.com
2025-03-19perf/x86/intel, x86/cpu: Simplify Intel PMU initializationSohil Mehta
Architectural Perfmon was introduced on the Family 6 "Core" processors starting with Yonah. Processors before Yonah need their own customized PMU initialization. p6_pmu_init() is expected to provide that initialization for early Family 6 processors. But, currently, it could get called for any Family 6 processor if the architectural perfmon feature is disabled on that processor. To simplify, restrict the P6 PMU initialization to early Family 6 processors that do not have architectural perfmon support and truly need the special handling. As a result, the "unsupported" console print becomes practically unreachable because all the released P6 processors are covered by the switch cases. Move the console print to a common location where it can cover all modern processors (including Family >15) that may not have architectural perfmon support enumerated. Also, use this opportunity to get rid of the unnecessary switch cases in P6 initialization. Only the Pentium Pro processor needs a quirk, and the rest of the processors do not need any special handling. The gaps in the case numbers are only due to no processor with those model numbers being released. Use decimal numbers to represent Intel Family numbers. Also, convert one of the last few Intel x86_model comparisons to a VFM-based one. Signed-off-by: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250318223828.2945651-2-sohil.mehta@intel.com
2025-03-19rseq/selftests: Fix namespace collision with rseq UAPI headerMichael Jeanson
When the rseq UAPI header is included, 'union rseq' clashes with 'struct rseq'. It's not the case in the rseq selftests but it does break the KVM selftests that also include this file. Rename 'union rseq' to 'union rseq_tls' to fix this. Fixes: e6644c967d3c ("rseq/selftests: Ensure the rseq ABI TLS is actually 1024 bytes") Reported-by: Mark Brown <broonie@kernel.org> Signed-off-by: Michael Jeanson <mjeanson@efficios.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/r/20250319202144.1141542-1-mjeanson@efficios.com
2025-03-19MAINTAINERS: Add a secondary maintainer for bluefield_edacDavid Thompson
Add David as a secondary maintainer. [ bp: Rewrite commit message. ] Signed-off-by: David Thompson <davthompson@nvidia.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20250319181630.2673-1-davthompson@nvidia.com
2025-03-19x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512Eric Biggers
Intel made a late change to the AVX10 specification that removes support for a 256-bit maximum vector length and enumeration of the maximum vector length. AVX10 will imply a maximum vector length of 512 bits. I.e. there won't be any such thing as AVX10/256 or AVX10/512; there will just be AVX10, and it will essentially just consolidate AVX512 features. As a result of this new development, my strategy of providing both *_avx10_256 and *_avx10_512 functions didn't turn out to be that useful. The only remaining motivation for the 256-bit AVX512 / AVX10 functions is to avoid downclocking on older Intel CPUs. But I already wrote *_avx2 code too (primarily to support CPUs without AVX512), which performs almost as well as *_avx10_256. So we should just use that. Therefore, remove the *_avx10_256 CRC functions, and rename the *_avx10_512 CRC functions to *_avx512. Make Ice Lake and Tiger Lake use the *_avx2 functions instead of *_avx10_256 which they previously used. Link: https://lore.kernel.org/r/20250319181316.91271-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2025-03-19Merge tag 'chinese-doc-6.15-rc1' of ↵Jonathan Corbet
gitolite.kernel.org:pub/scm/linux/kernel/git/alexs/linux into docs-mw Chinese translation docs for 6.15-rc1 This is the Chinese translation subtree for 6.15-rc1. It just includes few changes: - Chinese disclaimer change - add a new translation doc: snp-tdx-threat-model - fix a typo Above patches are tested by 'make htmldocs/pdfdocs' Signed-off-by: Alex Shi <alexs@kernel.org>
2025-03-19wifi: mt76: mt7996: fix locking in mt7996_mac_sta_rc_work()Johannes Berg
The 'continue' statements need to be under spinlock, since the spinlock needs to be held as a loop invariant. Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-19Merge tag 'for-net-2025-03-14' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - hci_event: Fix connection regression between LE and non-LE adapters - Fix error code in chan_alloc_skb_cb() * tag 'for-net-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_event: Fix connection regression between LE and non-LE adapters Bluetooth: Fix error code in chan_alloc_skb_cb() ==================== Link: https://patch.msgid.link/20250314163847.110069-1-luiz.dentz@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-19Merge tag 'mt76-next-2025-03-19' of https://github.com/nbd168/wirelessJohannes Berg
Felix Fietkau says: ==================== mt76 patches for 6.15 - preparation for mt7996 mlo support - fixes ==================== Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-19net: macb: Add __nonstring annotations for unterminated stringsKees Cook
When a character array without a terminating NUL character has a static initializer, GCC 15's -Wunterminated-string-initialization will only warn if the array lacks the "nonstring" attribute[1]. Mark the arrays with __nonstring to correctly identify the char array as "not a C string" and thereby eliminate the warning: In file included from ../drivers/net/ethernet/cadence/macb_main.c:42: ../drivers/net/ethernet/cadence/macb.h:1070:35: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization] 1070 | GEM_STAT_TITLE(TX1519CNT, "tx_greater_than_1518_byte_frames"), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/net/ethernet/cadence/macb.h:1050:24: note: in definition of macro 'GEM_STAT_TITLE_BITS' 1050 | .stat_string = title, \ | ^~~~~ ../drivers/net/ethernet/cadence/macb.h:1070:9: note: in expansion of macro 'GEM_STAT_TITLE' 1070 | GEM_STAT_TITLE(TX1519CNT, "tx_greater_than_1518_byte_frames"), | ^~~~~~~~~~~~~~ ../drivers/net/ethernet/cadence/macb.h:1097:35: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization] 1097 | GEM_STAT_TITLE(RX1519CNT, "rx_greater_than_1518_byte_frames"), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/net/ethernet/cadence/macb.h:1050:24: note: in definition of macro 'GEM_STAT_TITLE_BITS' 1050 | .stat_string = title, \ | ^~~~~ ../drivers/net/ethernet/cadence/macb.h:1097:9: note: in expansion of macro 'GEM_STAT_TITLE' 1097 | GEM_STAT_TITLE(RX1519CNT, "rx_greater_than_1518_byte_frames"), | ^~~~~~~~~~~~~~ Since these strings are copied with memcpy() they do not need to be NUL terminated, and can use __nonstring: memcpy(p, gem_statistics[i].stat_string, ETH_GSTRING_LEN); Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1] Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250312200700.make.521-kees@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-19Merge branch 'netconsole-allow-selection-of-egress-interface-via-mac-address'Paolo Abeni
Uday Shankar says: ==================== netconsole: allow selection of egress interface via MAC address This series adds support for selecting a netconsole egress interface by specifying the MAC address (in place of the interface name) in the boot/module parameter. Signed-off-by: Uday Shankar <ushankar@purestorage.com> ==================== Link: https://patch.msgid.link/20250312-netconsole-v6-0-3437933e79b8@purestorage.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-19netconsole: allow selection of egress interface via MAC addressUday Shankar
Currently, netconsole has two methods of configuration - module parameter and configfs. The former interface allows for netconsole activation earlier during boot (by specifying the module parameter on the kernel command line), so it is preferred for debugging issues which arise before userspace is up/the configfs interface can be used. The module parameter syntax requires specifying the egress interface name. This requirement makes it hard to use for a couple reasons: - The egress interface name can be hard or impossible to predict. For example, installing a new network card in a system can change the interface names assigned by the kernel. - When constructing the module parameter, one may have trouble determining the original (kernel-assigned) name of the interface (which is the name that should be given to netconsole) if some stable interface naming scheme is in effect. A human can usually look at kernel logs to determine the original name, but this is very painful if automation is constructing the parameter. For these reasons, allow selection of the egress interface via MAC address when configuring netconsole using the module parameter. Update the netconsole documentation with an example of the new syntax. Selection of egress interface by MAC address via configfs is far less interesting (since when this interface can be used, one should be able to easily convert between MAC address and interface name), so it is left unimplemented. Signed-off-by: Uday Shankar <ushankar@purestorage.com> Reviewed-by: Breno Leitao <leitao@debian.org> Tested-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250312-netconsole-v6-2-3437933e79b8@purestorage.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-19net, treewide: define and use MAC_ADDR_STR_LENUday Shankar
There are a few places in the tree which compute the length of the string representation of a MAC address as 3 * ETH_ALEN - 1. Define a constant for this and use it where relevant. No functionality changes are expected. Signed-off-by: Uday Shankar <ushankar@purestorage.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@verge.net.au> Link: https://patch.msgid.link/20250312-netconsole-v6-1-3437933e79b8@purestorage.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-19Merge tag 'hwmon-fixes-for-v6.14-rc8/6.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix an entry in MAINTAINERS to avoid sending hwmon review requests to the i2c mailing list - Fix an out-of-bounds access in nct6775 driver * tag 'hwmon-fixes-for-v6.14-rc8/6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (nct6775-core) Fix out of bounds access for NCT679{8,9} MAINTAINERS: correct list and scope of LTC4286 HARDWARE MONITOR
2025-03-19net: stmmac: dwc-qos-eth: use devm_kzalloc() for AXI dataRussell King (Oracle)
Everywhere else in the driver uses devm_kzalloc() when allocating the AXI data, so there is no kfree() of this structure. However, dwc-qos-eth uses kzalloc(), which leads to this memory being leaked. Switch to use devm_kzalloc(). Fixes: d8256121a91a ("stmmac: adding new glue driver dwmac-dwc-qos-eth") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1tsRyv-0064nU-O9@rmk-PC.armlinux.org.uk Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-19gpu: host1x: Do not assume that a NULL domain means no DMA IOMMUJason Gunthorpe
Previously with tegra-smmu, even with CONFIG_IOMMU_DMA, the default domain could have been left as NULL. The NULL domain is specially recognized by host1x_iommu_attach() as meaning it is not the DMA domain and should be replaced with the special shared domain. This happened prior to the below commit because tegra-smmu was using the NULL domain to mean IDENTITY. Now that the domain is properly labled the test in DRM doesn't see NULL. Check for IDENTITY as well to enable the special domains. This is the same issue and basic fix as seen in commit fae6e669cdc5 ("drm/tegra: Do not assume that a NULL domain means no DMA IOMMU"). Fixes: c8cc2655cc6c ("iommu/tegra-smmu: Implement an IDENTITY domain") Reported-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Closes: https://lore.kernel.org/all/c6a6f114-3acd-4d56-a13b-b88978e927dc@tecnico.ulisboa.pt/ Tested-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/0-v1-10dcc8ce3869+3a7-host1x_identity_jgg@nvidia.com
2025-03-19r8169: switch away from deprecated pcim_iomap_tableHeiner Kallweit
Avoid using deprecated pcim_iomap_table by switching to pcim_iomap_region. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/a36b4cf3-c792-40fa-8164-5dc9d5f14dd0@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-19mips: export pci_iounmap()Arnd Bergmann
I added this function in an earlier patch, but the missing export caused a build failure Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-19ASoC: ops: Apply platform_max after deciding control typeCharles Keepax
It doesn't really make sense for the type of a control to change based on the platform_max field. platform_max allows a specific system to limit values of a control for safety but it seems reasonable the control type should remain the same between different systems, even if it is restricted down to just two values. Move the application of platform_max to after control type determination in soc_info_volsw(). Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250319175123.3835849-4-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-19ASoC: ops: Remove some unnecessary local variablesCharles Keepax
Remove some local variables that aren't adding much in terms of clarity or space saving. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250319175123.3835849-3-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-19ASoC: ops: Factor out common code from get callbacksCharles Keepax
There are only two differences between snd_soc_get_volsw() and snd_soc_get_volsw_sx(). The maximum field is handled differently, and snd_soc_get_volsw() supports double controls with both values in the same register. Factor out the common code into a new helper and pass in the appropriate max value such that it is handled correctly for each control. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250319175123.3835849-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-19Merge branch 'net-bring-back-dev_addr_sem'Paolo Abeni
Stanislav Fomichev says: ==================== net: bring back dev_addr_sem Kohei reports an issue with dev_addr_sem conversion to netdev instance lock in [0]. Based on the discussion, switching to netdev instance lock to protect the address might not work for the devices that are not using netdev ops lock. Bring dev_addr_sem instance lock back but fix the ordering. 0: https://lore.kernel.org/netdev/20250308203835.60633-2-enjuk@amazon.com ==================== Link: https://patch.msgid.link/20250312190513.1252045-1-sdf@fomichev.me Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-19net: reorder dev_addr_sem lockStanislav Fomichev
Lockdep complains about circular lock in 1 -> 2 -> 3 (see below). Change the lock ordering to be: - rtnl_lock - dev_addr_sem - netdev_ops (only for lower devices!) - team_lock (or other per-upper device lock) 1. rtnl_lock -> netdev_ops -> dev_addr_sem rtnl_setlink rtnl_lock do_setlink IFLA_ADDRESS on lower netdev_ops dev_addr_sem 2. rtnl_lock -> team_lock -> netdev_ops rtnl_newlink rtnl_lock do_setlink IFLA_MASTER on lower do_set_master team_add_slave team_lock team_port_add dev_set_mtu netdev_ops 3. rtnl_lock -> dev_addr_sem -> team_lock rtnl_newlink rtnl_lock do_setlink IFLA_ADDRESS on upper dev_addr_sem netif_set_mac_address team_set_mac_address team_lock 4. rtnl_lock -> netdev_ops -> dev_addr_sem rtnl_lock dev_ifsioc dev_set_mac_address_user __tun_chr_ioctl rtnl_lock dev_set_mac_address_user tap_ioctl rtnl_lock dev_set_mac_address_user dev_set_mac_address_user netdev_lock_ops netif_set_mac_address_user dev_addr_sem v2: - move lock reorder to happen after kmalloc (Kuniyuki) Cc: Kohei Enju <enjuk@amazon.com> Fixes: df43d8bf1031 ("net: replace dev_addr_sem with netdev instance lock") Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250312190513.1252045-3-sdf@fomichev.me Tested-by: Lei Yang <leiyang@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-19Revert "net: replace dev_addr_sem with netdev instance lock"Stanislav Fomichev
This reverts commit df43d8bf10316a7c3b1e47e3cc0057a54df4a5b8. Cc: Kohei Enju <enjuk@amazon.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Fixes: df43d8bf1031 ("net: replace dev_addr_sem with netdev instance lock") Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250312190513.1252045-2-sdf@fomichev.me Tested-by: Lei Yang <leiyang@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-14 13:57:22 +0000