| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull LKMM documentation updates from Paul McKenney:
"This upgrades LKMM documentation, perhaps most notably adding a number
of litmus tests illustrating cmpxchg() ordering properties.
TL;DR: Failing cmpxchg() operations provide no ordering"
* tag 'lkmm.2024.05.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
Documentation/litmus-tests: Make cmpxchg() tests safe for klitmus
Documentation/atomic_t: Emphasize that failed atomic operations give no ordering
Documentation/litmus-tests: Demonstrate unordered failing cmpxchg
Documentation/litmus-tests: Add locking tests to README
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull cmpxchg updates from Paul McKenney:
"Provide one-byte and two-byte cmpxchg() support on sparc32, parisc,
and csky
This provides native one-byte and two-byte cmpxchg() support for
sparc32 and parisc, courtesy of Al Viro. This support is provided by
the same hashed-array-of-locks technique used for the other atomic
operations provided for these two platforms.
There is also emulated one-byte cmpxchg() support for csky using a new
cmpxchg_emu_u8() function that uses a four-byte cmpxchg() to emulate
the one-byte variant.
Similar patches for emulation of one-byte cmpxchg() for arc, sh, and
xtensa have not yet received maintainer acks, so they are slated for
the v6.11 merge window"
* tag 'cmpxchg.2024.05.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
csky: Emulate one-byte cmpxchg
lib: Add one-byte emulation function
parisc: add u16 support to cmpxchg()
parisc: add missing export of __cmpxchg_u8()
parisc: unify implementations of __cmpxchg_u{8,32,64}
parisc: __cmpxchg_u32(): lift conversion into the callers
sparc32: add __cmpxchg_u{8,16}() and teach __cmpxchg() to handle those sizes
sparc32: unify __cmpxchg_u{32,64}
sparc32: make the first argument of __cmpxchg_u64() volatile u64 *
sparc32: make __cmpxchg_u32() return u32
|
|
_GNU_SOURCE is provided by lib.mk, so it should be dropped to prevent
redefinition warnings.
Signed-off-by: Edward Liaw <edliaw@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Commit 452e9e6992fe ("filemap: Add filemap_remove_folio and
__filemap_remove_folio") reimplemented __delete_from_page_cache() as
__filemap_remove_folio() and delete_from_page_cache() as
filemap_remove_folio(). The compatibility wrappers were finally removed
in ece62684dcfb ("hugetlbfs: convert hugetlb_delete_from_page_cache() to
use folios") and 6ffcd825e7d0 ("mm: Remove __delete_from_page_cache()").
Update the remaining references to dead functions in the memcg
implementation memo.
Signed-off-by: Illia Ostapyshyn <illia@yshyn.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Pull RCU updates from Uladzislau Rezki:
- Fix a lockdep complain for lazy-preemptible kernel, remove redundant
BH disable for TINY_RCU, remove redundant READ_ONCE() in tree.c, fix
false positives KCSAN splat and fix buffer overflow in the
print_cpu_stall_info().
- Misc updates related to bpf, tracing and update the MAINTAINERS file.
- An improvement of a normal synchronize_rcu() call in terms of
latency. It maintains a separate track for sync. users only. This
approach bypasses per-cpu nocb-lists thus sync-users do not depend on
nocb-list length and how fast regular callbacks are processed.
- RCU tasks: switch tasks RCU grace periods to sleep at TASK_IDLE
priority, fix some comments, add some diagnostic warning to the
exit_tasks_rcu_start() and fix a buffer overflow in the
show_rcu_tasks_trace_gp_kthread().
- RCU torture: Increase memory to guest OS, fix a Tasks Rude RCU
testing, some updates for TREE09, dump mode information to debug GP
kthread state, remove redundant READ_ONCE(), fix some comments about
RCU_TORTURE_PIPE_LEN and pipe_count, remove some redundant pointer
initialization, fix a hung splat task by when the rcutorture tests
start to exit, fix invalid context warning, add '--do-kvfree'
parameter to torture test and use slow register unregister callbacks
only for rcutype test.
* tag 'rcu.next.v6.10' of https://github.com/urezki/linux: (48 commits)
rcutorture: Use rcu_gp_slow_register/unregister() only for rcutype test
torture: Scale --do-kvfree test time
rcutorture: Fix invalid context warning when enable srcu barrier testing
rcutorture: Make stall-tasks directly exit when rcutorture tests end
rcutorture: Removing redundant function pointer initialization
rcutorture: Make rcutorture support print rcu-tasks gp state
rcutorture: Use the gp_kthread_dbg operation specified by cur_ops
rcutorture: Re-use value stored to ->rtort_pipe_count instead of re-reading
rcutorture: Fix rcu_torture_one_read() pipe_count overflow comment
rcutorture: Remove extraneous rcu_torture_pipe_update_one() READ_ONCE()
rcu: Allocate WQ with WQ_MEM_RECLAIM bit set
rcu: Support direct wake-up of synchronize_rcu() users
rcu: Add a trace event for synchronize_rcu_normal()
rcu: Reduce synchronize_rcu() latency
rcu: Fix buffer overflow in print_cpu_stall_info()
rcu: Mollify sparse with RCU guard
rcu-tasks: Fix show_rcu_tasks_trace_gp_kthread buffer overflow
rcu-tasks: Fix the comments for tasks_rcu_exit_srcu_stall_timer
rcu-tasks: Replace exit_tasks_rcu_start() initialization with WARN_ON_ONCE()
rcu: Remove redundant CONFIG_PROVE_RCU #if condition
...
|
|
The ABI documentation indicates that field separators do not need a
space between them, only a ';'. When no spacing is used, the register
must work. Any subsequent register, with or without spaces, must match
and not return -EADDRINUSE.
Add a non-spacing separator case to our self-test register case to ensure
it works going forward.
Link: https://lore.kernel.org/linux-trace-kernel/20240423162338.292-3-beaub@linux.microsoft.com
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When the ABI was updated to prevent same name w/different args, it
missed an important corner case when fields don't end with a space.
Typically, space is used for fields to help separate them, like
"u8 field1; u8 field2". If no spaces are used, like
"u8 field1;u8 field2", then the parsing works for the first time.
However, the match check fails on a subsequent register, leading to
confusion.
This is because the match check uses argv_split() and assumes that all
fields will be split upon the space. When spaces are used, we get back
{ "u8", "field1;" }, without spaces we get back { "u8", "field1;u8" }.
This causes a mismatch, and the user program gets back -EADDRINUSE.
Add a method to detect this case before calling argv_split(). If found
force a space after the field separator character ';'. This ensures all
cases work properly for matching.
With this fix, the following are all treated as matching:
u8 field1;u8 field2
u8 field1; u8 field2
u8 field1;\tu8 field2
u8 field1;\nu8 field2
Link: https://lore.kernel.org/linux-trace-kernel/20240423162338.292-2-beaub@linux.microsoft.com
Fixes: ba470eebc2f6 ("tracing/user_events: Prevent same name but different args event")
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull alpha updates from Arnd Bergmann:
"I had investigated dropping support for alpha EV5 and earlier a while
ago after noticing that this is the only supported CPU family in the
kernel without native byte access and that Debian has already dropped
support for this generation last year [1] in order to improve
performance for the newer machines.
This topic came up again when Paul McKenney noticed that parts of the
RCU code already rely on byte access and do not work on alpha EV5
reliably, so we decided on using my series to avoid the problem
entirely.
Al Viro did another series for alpha to address all the known build
issues. I rebased his patches without any further changes and included
it as a baseline for my work here to avoid conflicts and allow
backporting the fixes to stable kernels for the now removed hardware
support as well"
[ I dearly loved alpha back in the days, but the lack of byte and word
operations was a horrible mistake and made everything worse -
including very much the crazy IO contortions that resulted from it.
It certainly wasn't the only mistake in the architecture, but it's the
first-order issue.
So while it's a bit sad to see the support for my first alpha go away,
if you want to run museum hardware, maybe you should use museum
kernels.. - Linus ]
* tag 'asm-generic-alpha' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
alpha: drop pre-EV56 support
alpha: cabriolet: remove EV5 CPU support
alpha: remove LCA and APECS based machines
alpha: sable: remove early machine support
alpha: remove DECpc AXP150 (Jensen) support
alpha: trim the unused stuff from asm-offsets.c
alpha: jensen, t2 - make __EXTERN_INLINE same as for the rest
alpha: core_lca: take the unused functions out
alpha: missing includes
alpha: sys_sio: fix misspelled ifdefs
alpha: don't make functions public without a reason
alpha: add clone3() support
alpha: fix modversions for strcpy() et.al.
alpha: sort scr_mem{cpy,move}w() out
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"Most of the changes enable additional device driver modules and arm64
platforms. In addition, the usb onboard-device support and ext4
security labels are turned on"
* tag 'soc-defconfig-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
arm64: defconfig: enable Airoha platform
arm64: defconfig: enable Khadas TS050 panel as module
arm64: defconfig: select INTERCONNECT_QCOM_SM6115 as built-in
arm64: defconfig: Enable Tegra Security Engine
arm64: defconfig: enable REGULATOR_QCOM_USB_VBUS
ARM: imx_v6_v7_defconfig: Update ONBOARD_USB_HUB to ONBOAD_USB_DEV
arm64: defconfig: enable ext4 security labels
arm64: defconfig: qcom: enable X1E80100 sound card
ARM: configs: sunxi: Enable DRM_DW_HDMI
arm64: defconfig: build snd_bcm2835 as module
arm64: defconfig: enable Rockchip Samsung USBDP PHY
ARM: shmobile: defconfig: Refresh for v6.9-rc1
arm64: defconfig: build ath12k as a module
arm64: defconfig: Enable sc7280 display and gpu clock controllers
ARM: imx_v6_v7_defconfig: Select CONFIG_USB_ONBOARD_HUB
arm64: defconfig: Enable DRM_IMX8MP_DW_HDMI_BRIDGE as module
arm64: defconfig: support Mali CSF-based GPUs
arm64: defconfig: enable Rockchip RK3308 internal audio codec driver
arm64: defconfig: Enable R9A09G057 SoC
arm64: defconfig: Enable Renesas DA9062 PMIC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC code changes from Arnd Bergmann:
"The code changes are fairly minimal, there is a bit of conversion of
the old orion5x platform to modern gpio descriptors, the Kconfig entry
for the added EN7581 platform and a sysfs change for the i.MX PMU
device"
* tag 'soc-arm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: add Airoha EN7581 platform
ARM: orion5x: Convert TS409 board to GPIO descriptors for LEDs
ARM: orion5x: Convert Net2big board to GPIO descriptors for LEDs
ARM: orion5x: Convert MV2120 board to GPIO descriptors for LEDs
ARM: orion5x: Convert DNS323 board to GPIO descriptors for LEDs
ARM: orion5x: Convert D2Net board to GPIO descriptors for LEDs
ARM: imx: Assign parents for mmdc event_source devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them.
Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is used
to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts and
indirect messaging, SCMI firmware support for pin control and
vendor specific interfaces, and TEE firmware interface changes
across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan k230
support
- Multiple minor updates for the TI sysc bus driver, memory
controllers, hisilicon hccs and more"
* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
firmware: arm_ffa: Avoid queuing work when running on the worker queue
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"The updates this time are a bit smaller than most times, mainly
because it is not totally dominated by new Qualcomm hardware support.
Instead, we larger than average updates for Rockchips, NXP, Allwinner
and TI. The only two new SoCs this time are both from NXP and are
minor variants of already supported ones.
The updates for aspeed, amlogic and mediatek came a little late, so
I'm saving those for part 2 in a few days if everything turns out
fine.
New machines this time contain:
- two Broadcom SoC based wireless routers from Asus
- Five allwinner based consumer devices for gaming, set-top-box and
eboot reader applications
- Three older phones based on Qualcomm chips, plus the more recent
Sony Xperia 1 V
- 14 industrial and embedded boards based on NXP i.MX6, i.MX8,
layerscape and s32g3 SoCs
- six rockchips boards including another handheld game console and a
few single-board computers
On top of these, we have the usual cleanups for dtc warnings and
updates to add more features to already merged machines"
* tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (612 commits)
arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address
arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells
arm64: dts: marvell: eDPU: drop redundant address/size-cells
arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible
arm64: dts: rockchip: add rk3588 pcie and php IOMMUs
arm64: dts: rockchip: enable onboard spi flash for rock-3a
arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5
arm64: dts: rockchip: Enable GPU on Orange Pi 5
arm64: dts: rockchip: enable GPU on khadas-edge2
arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board
arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module
arm64: dts: rockchip: Add Radxa ROCK 3C
dt-bindings: arm: rockchip: add Radxa ROCK 3C
arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl
arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2
arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]
arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive
arm64: dts: Add/fix /memory node unit-addresses
arm64: dts: qcom: qcs404: fix bluetooth device address
arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Store AP Query Configuration Information in a static buffer
- Rework the AP initialization and add missing cleanups to the error
path
- Swap IRQ and AP bus/device registration to avoid race conditions
- Export prot_virt_guest symbol
- Introduce AP configuration changes notifier interface to facilitate
modularization of the AP bus
- Add CONFIG_AP kernel configuration option to allow modularization of
the AP bus
- Rework CONFIG_ZCRYPT_DEBUG kernel configuration option description
and dependency and rename it to CONFIG_AP_DEBUG
- Convert sprintf() and snprintf() to sysfs_emit() in CIO code
- Adjust indentation of RELOCS command build step
- Make crypto performance counters upward compatible
- Convert make_page_secure() and gmap_make_secure() to use folio
- Rework channel-utilization-block (CUB) handling in preparation of
introducing additional CUBs
- Use attribute groups to simplify registration, removal and extension
of measurement-related channel-path sysfs attributes
- Add a per-channel-path binary "ext_measurement" sysfs attribute that
provides access to extended channel-path measurement data
- Export measurement data for all channel-measurement-groups (CMG), not
only for a specific ones. This enables support of new CMG data
formats in userspace without the need for kernel changes
- Add a per-channel-path sysfs attribute "speed_bps" that provides the
operating speed in bits per second or 0 if the operating speed is not
available
- The CIO tracepoint subchannel-type field "st" is incorrectly set to
the value of subchannel-enabled SCHIB "ena" field. Fix that
- Do not forcefully limit vmemmap starting address to MAX_PHYSMEM_BITS
- Consider the maximum physical address available to a DCSS segment
(512GB) when memory layout is set up
- Simplify the virtual memory layout setup by reducing the size of
identity mapping vs vmemmap overlap
- Swap vmalloc and Lowcore/Real Memory Copy areas in virtual memory.
This will allow to place the kernel image next to kernel modules
- Move everyting KASLR related from <asm/setup.h> to <asm/page.h>
- Put virtual memory layout information into a structure to improve
code generation
- Currently __kaslr_offset is the kernel offset in both physical and
virtual memory spaces. Uncouple these offsets to allow uncoupling of
the addresses spaces
- Currently the identity mapping base address is implicit and is always
set to zero. Make it explicit by putting into __identity_base
persistent boot variable and use it in proper context
- Introduce .amode31 section start and end macros AMODE31_START and
AMODE31_END
- Introduce OS_INFO entries that do not reference any data in memory,
but rather provide only values
- Store virtual memory layout in OS_INFO. It is read out by
makedumpfile, crash and other tools
- Store virtual memory layout in VMCORE_INFO. It is read out by crash
and other tools when /proc/kcore device is used
- Create additional PT_LOAD ELF program header that covers kernel image
only, so that vmcore tools could locate kernel text and data when
virtual and physical memory spaces are uncoupled
- Uncouple physical and virtual address spaces
- Map kernel at fixed location when KASLR mode is disabled. The
location is defined by CONFIG_KERNEL_IMAGE_BASE kernel configuration
value.
- Rework deployment of kernel image for both compressed and
uncompressed variants as defined by CONFIG_KERNEL_UNCOMPRESSED kernel
configuration value
- Move .vmlinux.relocs section in front of the compressed kernel. The
interim section rescue step is avoided as result
- Correct modules thunk offset calculation when branch target is more
than 2GB away
- Kernel modules contain their own set of expoline thunks. Now that the
kernel modules area is less than 4GB away from kernel expoline
thunks, make modules use kernel expolines. Also make EXPOLINE_EXTERN
the default if the compiler supports it
- userfaultfd can insert shared zeropages into processes running VMs,
but that is not allowed for s390. Fallback to allocating a fresh
zeroed anonymous folio and insert that instead
- Re-enable shared zeropages for non-PV and non-skeys KVM guests
- Rename hex2bitmap() to ap_hex2bitmap() and export it for external use
- Add ap_config sysfs attribute to provide the means for setting or
displaying adapters, domains and control domains assigned to a
vfio-ap mediated device in a single operation
- Make vfio_ap_mdev_link_queue() ignore duplicate link requests
- Add write support to ap_config sysfs attribute to allow atomic update
a vfio-ap mediated device state
- Document ap_config sysfs attribute
- Function os_info_old_init() is expected to be called only from a
regular kdump kernel. Enable it to be called from a stand-alone dump
kernel
- Address gcc -Warray-bounds warning and fix array size in struct
os_info
- s390 does not support SMBIOS, so drop unneeded CONFIG_DMI checks
- Use unwinder instead of __builtin_return_address() with ftrace to
prevent returning of undefined values
- Sections .hash and .gnu.hash are only created when CONFIG_PIE_BUILD
kernel is enabled. Drop these for the case CONFIG_PIE_BUILD is
disabled
- Compile kernel with -fPIC and link with -no-pie to allow kpatch
feature always succeed and drop the whole CONFIG_PIE_BUILD
option-enabled code
- Add missing virt_to_phys() converter for VSIE facility and crypto
control blocks
* tag 's390-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits)
Revert "s390: Relocate vmlinux ELF data to virtual address space"
KVM: s390: vsie: Use virt_to_phys for crypto control block
s390: Relocate vmlinux ELF data to virtual address space
s390: Compile kernel with -fPIC and link with -no-pie
s390: vmlinux.lds.S: Drop .hash and .gnu.hash for !CONFIG_PIE_BUILD
s390/ftrace: Use unwinder instead of __builtin_return_address()
s390/pci: Drop unneeded reference to CONFIG_DMI
s390/os_info: Fix array size in struct os_info
s390/os_info: Initialize old os_info in standalone dump kernel
docs: Update s390 vfio-ap doc for ap_config sysfs attribute
s390/vfio-ap: Add write support to sysfs attr ap_config
s390/vfio-ap: Ignore duplicate link requests in vfio_ap_mdev_link_queue
s390/vfio-ap: Add sysfs attr, ap_config, to export mdev state
s390/ap: Externalize AP bus specific bitmap reading function
s390/mm: Re-enable the shared zeropage for !PV and !skeys KVM guests
mm/userfaultfd: Do not place zeropages when zeropages are disallowed
s390/expoline: Make modules use kernel expolines
s390/nospec: Correct modules thunk offset calculation
s390/boot: Do not rescue .vmlinux.relocs section
s390/boot: Rework deployment of the kernel image
...
|
|
Some of the PCI host controllers (such as generic PCI host controller)
use "interrupt-map" DT property to describe the mapping between PCI
endpoints and PCI interrupt pins. This is the only case where the
interrupts are not described in DT.
Currently, there is no fw_devlink created based on "interrupt-map"
DT property so interrupt controller is not guaranteed to be probed
before the PCI host controller. This affects every platform where
both PCI host controller and interrupt controllers are probed as
regular platform devices.
This creates fw_devlink between consumers (PCI host controller) and
supplier (interrupt controller) based on "interrupt-map" DT property.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20240509120820.1430587-1-apatel@ventanamicro.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
DSI-attached devices could respond to more than one virtual channel
number, thus their bindings are supposed to constrain the 'reg' property
to match hardware. Add missing 'reg' constrain for DSI-attached display
panels, based on DTS sources in Linux kernel (assume all devices take
only one channel number).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240509-dt-bindings-dsi-panel-reg-v1-3-8b2443705be0@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
SPI-attached devices could have more than one chip-select, thus their
bindings are supposed to constrain the 'reg' property to match hardware.
Add missing 'reg' constrain for SPI-attached display panels.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240509-dt-bindings-dsi-panel-reg-v1-2-8b2443705be0@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Samsung AMS495QA01 panel is a SPI device, so it should reference
spi-peripheral-props.yaml schema to allow and validate the SPI device
properties.
Fixes: 92be07c65b22 ("dt-bindings: display: panel: Add Samsung AMS495QA01")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240509-dt-bindings-dsi-panel-reg-v1-1-8b2443705be0@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
I missed the last chance to send this in for 6.9, so it now goes into
the 6.10 queue
|
|
99a741aa7a2d ("i2c: mux: gpio: remove support for class-based device
instantiation") removed the last call to i2c_mux_add_adapter() with a
non-null class argument. Therefore the class argument can be removed.
Note: Class-based device instantiation is a legacy mechanism which
shouldn't be used in new code, so we can rule out that this argument
may be needed again in the future.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
After the patch to restrict the use of mmap() to CAP_SYS_RAWIO for
the currently existing devices, most applications can no longer make
use of the accelerators as in production "you don't run things as root".
To keep the DSA and IAA accelerators usable, hook up a write() method
so that applications can still submit work. In the write method,
sufficient input validation is performed to avoid the security issue
that required the mmap CAP_SYS_RAWIO check.
One complication is that the DSA device allows for indirect ("batched")
descriptors. There is no reasonable way to do the input validation
on these indirect descriptors so the write() method will not allow these
to be submitted to the hardware on affected hardware, and the sysfs
enumeration of support for the opcode is also removed.
Early performance data shows that the performance delta for most common
cases is within the noise.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
|
|
On Sapphire Rapids and related platforms, the DSA and IAA devices have an
erratum that causes direct access (for example, by using the ENQCMD or
MOVDIR64 instructions) from untrusted applications to be a security problem.
To solve this, add a flag to the PCI device enumeration and device structures
to indicate the presence/absence of this security exposure. In the mmap()
method of the device, this flag is then used to enforce that the user
has the CAP_SYS_RAWIO capability.
In a future patch, a write() based method will be added that allows untrusted
applications submit work to the accelerator, where the kernel can do
sanity checking on the user input to ensure secure operation of the accelerator.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
|
|
Due to an erratum with the SPR_DSA and SPR_IAX devices, it is not secure to assign
these devices to virtual machines. Add the PCI IDs of these devices to the VFIO
denylist to ensure that this is handled appropriately by the VFIO subsystem.
The SPR_DSA and SPR_IAX devices are on-SOC devices for the Sapphire Rapids
(and related) family of products that perform data movement and compression.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
Code cleanup:
A substantial code cleanup from Wolfram affects many drivers:
- Removed dev_err() in case of timeout during i2c transfers, as
timeouts are not considered errors and should not be treated
as such.
- For the same reason, 'timeout' variables have been renamed to
'time_left'.
Other cleanups:
- The viperboard driver now omits the "owner = THIS_MODULE"
assignment.
- Finally, we have eliminated the last remnants of
I2C_CLASS_SPD: support for class-based devices has been
completely removed from the mux-gpio driver.
- In the ocore devices, a more standard use of ioport_map() for
8-bit I/O read/write operations has been implemented.
- The mpc driver will be among the first i2c drivers and one of
the first in the kernel to use the __free auto cleanup
routine.
- The designware driver now uses MODULE_DEVICE_TABLE() instead
of MODULE_ALIAS() for better consistency with the ID table.
- Added prefixes to the octeon register macros.
- Fixed some checkpatch errors in the newly created
i2c-viai2c-common.c file.
Code refactoring:
- The riic driver has refactored read/write operations to more
flexibly support new platforms, laying the foundation for new
SoC peculiarities.
- In the i801 driver, a notifier callback has been created for
muxed child segments.
- The lpi2c driver now sets a clock rate during probe instead
of continuously calling clk_get_rate().
- Improvements in the clock divisor logic to accommodate other
clock frequencies.
- Combined some common functionalities during initialization
for the wmt driver and separated others that can be
independently used by different drivers. Now, all the common
functionalities are grouped in the i2c-viai2c-common.c file.
- Improved the clock stretching mechanism in the newly created
i2c-viai2c-common.c file, inherited from the previous
i2c-wmt.c.
Features added:
- The octeon driver now includes watchdog timeout handling.
- Added high-speed support for the octeon driver.
Added support for:
- R9A09G057 SoC in the riic driver.
- Rapids-D I2C controller in the designware driver.
- Cadence driver now also supports RISC-V architectures.
- Added support to the WMT device as a separate driver using the
newly created i2c-viai2c-common.c functionalities.
- Added support for the Zhaoxin I2C controller.
Some improvements in the bindings:
- The pnx driver is converted to dtschema.
- Added documentation for the Qualcomm SC8280XP.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
This tag includes two fixes. The first one, in the Cadence driver
seen in Qemu, prevents unintentional FIFO clearing at the
beginning of a transaction. The second fix, in the SynQuacer,
ensures proper error handling during clock get, prepare, and
enable operations by using the devm_clk_get_enabled() helper.
|
|
arch/sh/kernel/setup.c:244:12: warning: no previous prototype for 'sh_fdt_init' [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/7e3ea09e706a075bceb6bfd172990676e79be1c2.1715606232.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/kernel/smp.c:326:5: warning: no previous prototype for 'setup_profiling_timer' [-Wmissing-prototypes]
The function is unconditionally defined in smp.c, but conditionally
declared in <linux/profile.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/effa5eecbd2389c6661974e91bb834db210989ea.1715606232.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/boards/of-generic.c:146:20: warning: no previous prototype for 'arch_init_clk_ops' [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/942621553ed82e3331e2e91485b643892d2d08bc.1715606232.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
Merge our topic branch containing kdump hotplug changes, more detail from the
original cover letter:
Commit 247262756121 ("crash: add generic infrastructure for crash
hotplug support") added a generic infrastructure that allows
architectures to selectively update the kdump image component during CPU
or memory add/remove events within the kernel itself.
This patch series adds crash hotplug handler for PowerPC and enable
support to update the kdump image on CPU/Memory add/remove events.
Among the 6 patches in this series, the first two patches make changes
to the generic crash hotplug handler to assist PowerPC in adding support
for this feature. The last four patches add support for this feature.
The following section outlines the problem addressed by this patch
series, along with the current solution, its shortcomings, and the
proposed resolution.
Problem:
========
Due to CPU/Memory hotplug or online/offline events the elfcorehdr
(which describes the CPUs and memory of the crashed kernel) and FDT
(Flattened Device Tree) of kdump image becomes outdated. Consequently,
attempting dump collection with an outdated elfcorehdr or FDT can lead
to failed or inaccurate dump collection.
Going forward CPU hotplug or online/offline events are referred as
CPU/Memory add/remove events.
Existing solution and its shortcoming:
======================================
The current solution to address the above issue involves monitoring the
CPU/memory add/remove events in userspace using udev rules and whenever
there are changes in CPU and memory resources, the entire kdump image
is loaded again. The kdump image includes kernel, initrd, elfcorehdr,
FDT, purgatory. Given that only elfcorehdr and FDT get outdated due to
CPU/Memory add/remove events, reloading the entire kdump image is
inefficient. More importantly, kdump remains inactive for a substantial
amount of time until the kdump reload completes.
Proposed solution:
==================
Instead of initiating a full kdump image reload from userspace on
CPU/Memory hotplug and online/offline events, the proposed solution aims
to update only the necessary kdump image component within the kernel
itself.
|
|
Merge our KVM topic branch.
|
|
into next
|
|
There are two quirk entries for SSID 103c:8a2e. Drop the latter one
that isn't applied in anyway.
As both point to the same quirk action, there is no actual behavior
change.
Fixes: aa8e3ef4fe53 ("ALSA: hda/realtek: Add quirks for various HP ENVY models")
Link: https://lore.kernel.org/r/20240513064010.17546-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ALC256 run on SOF mode. Boot with plugged headset, the Headset Mic will be gone.
Plugged headset after boot. It had partial fail with Headset Mic detect.
Add spec->en_3kpull_low = false will solve all issues.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/c8b638590c5f45a6a5c6aeb20c31fd5b@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Makefile in AMD ACP driver has a line substitution with "=" instead of
"+="; this overrides the preexisting item, hence it broke the build
after the recent change to replace *-objs with *-y.
This patch corrects the line.
Fixes: 1a74b21ce59f ("ASoC: SOF: amd: Add Probe functionality support for amd platforms.")
Fixes: 9c2f5b6eb8b7 ("ASoC: SOF: Use *-y instead of *-objs in Makefile")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20240510170305.03b67d9f@canb.auug.org.au
Link: https://lore.kernel.org/r/20240510073656.23491-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.10
This is a very big update, in large part due to extensive work the Intel
people have been doing in their drivers though it's also been busy
elsewhere. There's also a big overhaul of the DAPM documentation from
Luca Ceresoli arising from the work he did putting together his recent
ELC talk, and he also contributed a new tool for visualising the DAPM
state.
- A new tool dapm-graph for visualising the DAPM state.
- Substantial fixes and clarifications for the DAPM documentation.
- Very large updates throughout the Intel audio drivers.
- Cleanups of accessors for driver data, module labelling, and for
constification.
- Modernsation and cleanup work in the Mediatek drivers.
- Several fixes and features for the DaVinci I2S driver.
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240.
|
|
We need to undo what was done in panthor_sched_pre_reset() even if the
reset failed. We just flag all previously running groups as terminated
when that happens to unblock things.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502183813.1612017-5-boris.brezillon@collabora.com
|
|
This way get NULL derefs instead of use-after-free if the FW VM is
referenced after the device has been unplugged.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502183813.1612017-4-boris.brezillon@collabora.com
|
|
Avoids use-after-free situations when panthor_fw_unplug() is called
and the kernel BO was mapped to the FW VM.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502183813.1612017-3-boris.brezillon@collabora.com
|
|
If the FW reports an unrecoverable fault, we need to reset the GPU
before we can start re-using it again.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502183813.1612017-2-boris.brezillon@collabora.com
|
|
constraints
Make sure the user is aware that drm_panthor_tiler_heap_destroy::handle
must be a handle previously returned by
DRM_IOCTL_PANTHOR_TILER_HEAP_CREATE.
v4:
- Add Steve's R-b
v3:
- New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502165158.1458959-6-boris.brezillon@collabora.com
|
|
The heap ID is used to index the heap context pool, and allocating
in the [1:MAX_HEAPS_PER_POOL] leads to an off-by-one. This was
originally to avoid returning a zero heap handle, but given the handle
is formed with (vm_id << 16) | heap_id, with vm_id > 0, we already can't
end up with a valid heap handle that's zero.
v4:
- s/XA_FLAGS_ALLOC1/XA_FLAGS_ALLOC/
v3:
- Allocate in the [0:MAX_HEAPS_PER_POOL-1] range
v2:
- New patch
Fixes: 9cca48fa4f89 ("drm/panthor: Add the heap logical block")
Reported-by: Eric Smith <eric.smith@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Eric Smith <eric.smith@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502165158.1458959-5-boris.brezillon@collabora.com
|
|
The field used to store the chunk size if 12 bits wide, and the encoding
is chunk_size = chunk_header.chunk_size << 12, which gives us a
theoretical [4k:8M] range. This range is further limited by
implementation constraints, and all known implementations seem to
impose a [128k:8M] range, so do the same here.
We also relax the power-of-two constraint, which doesn't seem to
exist on v10. This will allow userspace to fine-tune initial/max
tiler memory on memory-constrained devices.
v4:
- Actually fix the range in the kerneldoc
v3:
- Add R-bs
- Fix valid range in the kerneldoc
v2:
- Turn the power-of-two constraint into a page-aligned constraint to allow
fine-tune of the initial/max heap memory size
- Fix the panthor_heap_create() kerneldoc
Fixes: 9cca48fa4f89 ("drm/panthor: Add the heap logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502165158.1458959-4-boris.brezillon@collabora.com
|
|
It doesn't make sense to have a maximum number of chunks smaller than
the initial number of chunks attached to the context.
Fix the uAPI header to reflect the new constraint, and mention the
undocumented "initial_chunk_count > 0" constraint while at it.
v3:
- Add R-b
v2:
- Fix the check
Fixes: 9cca48fa4f89 ("drm/panthor: Add the heap logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502165158.1458959-3-boris.brezillon@collabora.com
|
|
If the kernel couldn't allocate memory because we reached the maximum
number of chunks but no render passes are in flight
(panthor_heap_grow() returning -ENOMEM), we should defer the OOM
handling to the FW by returning a NULL chunk. The FW will then call
the tiler OOM exception handler, which is supposed to implement
incremental rendering (execute an intermediate fragment job to flush
the pending primitives, release the tiler memory that was used to
store those primitives, and start over from where it stopped).
Instead of checking for both ENOMEM and EBUSY, make panthor_heap_grow()
return ENOMEM no matter the reason of this allocation failure, the FW
doesn't care anyway.
v3:
- Add R-bs
v2:
- Make panthor_heap_grow() return -ENOMEM for all kind of allocation
failures
- Document the panthor_heap_grow() semantics
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Antonino Maniscalco <antonino.maniscalco@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502165158.1458959-2-boris.brezillon@collabora.com
|
|
The G2-to-PCI bridge chip found in SEGA Dreamcast assumes P2 area
relative addresses.
Set the appropriate IOPORT base offset.
Tested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20240511191614.68561-2-contact@artur-rojek.eu
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
Günther is a major contributor to Landlock, both on the kernel and user
space sides, and he is already reviewing Landlock changes. Thanks!
Cc: James Morris <jmorris@namei.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Acked-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240425092126.975830-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Landlock's IOCTL support needs to partially replicate the list of
IOCTLs from do_vfs_ioctl(). The list of commands implemented in
do_vfs_ioctl() should be kept in sync with Landlock's IOCTL policies.
Suggested-by: Paul Moore <paul@paul-moore.com>
Suggested-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240419161122.2023765-12-gnoack@google.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Landlock needs to track changes to do_vfs_ioctl() when new IOCTL
implementations are added to it.
Suggested-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240419161122.2023765-11-gnoack@google.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
In the paragraph above the fallback logic, use the shorter phrasing
from the landlock(7) man page.
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240419161122.2023765-10-gnoack@google.com
[mic: Update date, and fix redundant "access"]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Add IOCTL support to the Landlock sample tool.
The IOCTL right is grouped with the read-write rights in the sample
tool, as some IOCTL requests provide features that mutate state.
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240419161122.2023765-9-gnoack@google.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
This test checks all IOCTL commands implemented in do_vfs_ioctl().
Test coverage for security/landlock is 90.9% of 722 lines according to
gcc/gcov-13.
Suggested-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240419161122.2023765-8-gnoack@google.com
[mic: Add test coverage]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
