summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-08-07forcedeth: fix rx error policyAyaz Abdulla
This patch enforces a stricter policy on rx errors. The driver needs to verify whether there are multiple rx errors versus a single error. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07Merge branch 'via-velocity' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6 into tmp
2008-08-07sky2: fix PM related regressionsStephen Hemminger
Fix the problems reported for 2.6.27-rc1 caused by over aggressive power management. Turning clock off on PCI Express is problematic for WOL, and when doing multi-booting. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07igb: remove igb_init_managability as it is deprecatedAlexander Duyck
igb_init_managability does not actually perform any function as the two registers it attempts to write are both read only on the host. This patch removes the function and all references to it from the driver. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07igb: remove three redundant functions left in the codeAlexander Duyck
Three functions were left in the code that are no longer used. I am removing these functions just to keep the code clean. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07igb: correct issue of set_mta member of mac.ops not being populatedAlexander Duyck
The igb_mta_set function was not being correctly used Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07igb: fixes 82576 serdes init to correctly support manual flow control changesAlexander Duyck
This patch changes the PCS configuration for serdes so that the flow control options change be set via the ethtool -A option. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07igb: fix null pointer dereference seen with fiber NICsAlexander Duyck
With a fiber or serdes NIC installed the driver was causing a null pointer dereference on driver unload. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07igb: fix commentsAlexander Duyck
The internal name was used in comments, replaced with silicon part number. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07atl1: deal with hardware rx checksum bugJay Cliburn
The L1 hardware contains a bug that flags a fragmented IP packet as having an incorrect TCP/UDP checksum, even though the packet is perfectly valid and its checksum is correct. There's no way to distinguish between one of these good packets and a packet that actually contains a TCP/UDP checksum error, so all we can do is allow the packet to be handed up to the higher layers and let it be sorted out there. Add a comment describing this condition and remove the code that currently fails to handle what may or may not be a checksum error. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07e1000e: remove inapplicable test for ioportBruce Allan
There are currently no devices supported by the e1000e driver which need ioport resources, remove the test for it and all unnecessary code associated with it (struct e1000_adapter elements, local variables, etc.) Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07e1000e: fix drv load issuesJesse Brandeburg
a few people seem to have problems maintaining gigabit link and it was root caused to an interaction between the managability firmware on the host and the driver, not communicating. The form of communication they use is the drv_load bit. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07e1000e: perform basic 82573 EEPROM checks for known issuesAuke Kok
82573 EEPROMs have been shipped out with known issues. While most people will never see the issues some people do and we know how to address them. Warn the user if we find one of these EEPROM issues. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07e1000e: convert ndev_ printks to something smallerJeff Kirsher
The ndev_* printk's are too lenghty and we don't need to specify the adapter/netdev struct at all, making this a lot more readable. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07myri10ge: set 64bits consistent DMA maskBrice Goglin
Set 64bits consistent DMA mask since it improves performance in some cases. No need to check the return value since it is not required for the driver to work. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07myri10ge: update firmware headersBrice Goglin
Update myri10ge firmware headers. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07Move all of include/asm-m68knommu to arch/m68knommu/include/asm.Greg Ungerer
With the current kbuild infrastructure in place no other changes are required for this to work. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-08-06mlx4_core: Add ethernet fields to CQE structYevgeny Petrilin
Add ethernet-related fields to struct mlx4_cqe so that the mlx4_en ethernet NIC driver can share the same definition. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-06Revert "pcm_native.c: remove unused label"Linus Torvalds
This reverts commit 680db0136e0778a0d7e025af7572c6a8d82279e2. The label is actually used, but hidden behind CONFIG_SND_DEBUG and the horrible snd_assert() macro. That macro could probably be improved to be along the lines of #define snd_assert(expr, args...) do { if ((void)(expr),0) { args; } } while (0) or similar to make sure that we always both evaluate 'expr' and parse 'args', but while gcc should optimize it all away, I'm too lazy to really verify that. So I'll just admit defeat and will continue to live with the annoying warning. Noted-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Linus "Grr.." Torvalds
2008-08-06ipv4: Fix over-ifdeffing of ip_static_sysctl_init.David S. Miller
Noticed by Paulius Zaleckas. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-06of/sparc: remove include of linux/of_platform.h from asm/of_platform.hStephen Rothwell
Now that we have removed all inclusions of asm/of_platform.h, this compatability include can be removed. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-06iSeries: Fix up viotty_ioctl BKL locking falloutLinus Torvalds
The bogus code to call into the n_tty layer got removed in commit 8bc5fb6abb670fa9079cd1994f016a39f99698fe ("Remove bogons from the iSeries console"), but it left a now uninitialized "return ret;" around. Not that this code has ever even compiled since the BKL pushdown, since not only is "ret" no longer initialized, it was never actually declared even originally. Replace it with a "return -ENOIOCTLCMD" Pointed-out-by: Paul Mackerras <paulus@samba.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-06turn cifs_setattr into a multiplexor that calls the correct functionJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-08-06move file time and dos attribute setting logic into new functionJeff Layton
Break up cifs_setattr further by moving the logic that sets file times and dos attributes into a separate function. This patch also refactors the logic a bit so that when the file is already open then we go ahead and do a SetFileInfo call. SetPathInfo seems to be unreliable when setting times on open files. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-08-06spin off cifs_setattr with unix extensions to its own functionJeff Layton
Create a new cifs_setattr_unix function to handle a setattr when unix extensions are enabled and have cifs_setattr call it. Also, clean up variable declarations in cifs_setattr. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-08-06pcm_native.c: remove unused labelLinus Torvalds
This fixes the warning sound/core/pcm_native.c: In function 'snd_pcm_fasync': sound/core/pcm_native.c:3262: warning: label 'out' defined but not used Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-06hwmon: (it87) Support for 16-bit fan reading in it8705 >= rev 0x03Andrew Paprocki
The it8705 chip supports 16-bit fan tachometers in revisions at least >= 0x03 (Version G). This patch enables 16-bit fan readings on all revisions >= 0x03 just like the it8712, it8716, and it8718 chips. Signed-off-by: Andrew Paprocki <andrew@ishiboo.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06hwmon: (it87) Support for 16-bit fan reading in it8712 >= rev 0x07Andrew Paprocki
The it8712 chip supports 16-bit fan tachometers in revisions >= 0x07. Revisions >= 0x08 dropped support for 8-bit fan divisor registers. The patch enables 16-bit fan readings on all revisions >= 0x07 just like the it8716 and it8718 chips. Signed-off-by: Andrew Paprocki <andrew@ishiboo.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06hwmon: (hwmon-vid) Add 6-bit vid codes for AMD NPT 0Fh cpusFrank Myhr
AMD NPT 0Fh cpus use 6 bit VID codes. Successive codes with msb 0 describe 25mV decrements, while those with msb 1 describe 12.5mV decrements. Existing hwmon-vid.c is correct only for codes with msb 0; add support for the codes with msb 1. Ref: p 309, Table 71 AMD Publication 32559, BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh Processors http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf Signed-off-by: Frank Myhr <fmyhr@fhmtech.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06hwmon: (hwmon-vid) Trivial format multi-line comments per CodingStyleFrank Myhr
Signed-off-by: Frank Myhr <fmyhr@fhmtech.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06hwmon: ad7414 driverSean MacLennan
Driver for the Analog Devices AD7414 temperature monitoring chip. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06hwmon: (thmc50) Add support for critical temperature limitsKrzysztof Helt
Add critical temperature limits to the driver. These limits are read only. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06hwmon: (adm9240) Remove EXPERIMENTAL dependencyGrant Coady
The adm9240 driver is in the kernel for three years now, time to remove the EXPERIMENTAL dependency. Signed-off-by: Grant Coady <gcoady.lk@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06hwmon: (w83627hf) Drop reset module parameterJean Delvare
Drop the reset parameter of the w83627hf driver. It seems it wasn't that useful. It was dropped from the Linux 2.4 version of this driver back in July 2004. The only users who have reported that they were still using this parameter, needed it to switch the chip from automatic fan speed control back to manual mode. Now that the driver creates pwmN_enable sysfs files, users will be able to use these files instead, which is way less agressive. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Dominik Geyer <dominik.geyer@gmx.de>
2008-08-06hwmon: (w83627hf) Add pwm_enable sysfs interfaceDominik Geyer
Adds support for pwm_enable sysfs interface for the w83627hf driver. Signed-off-by: Dominik Geyer <dominik.geyer@gmx.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06hwmon: (w83791d) Use fan divisor bits from vbat registerMarc Hulsman
Update w83791d with fan bits in vbat mon register (7.48 of the datasheet). This change allows all fans to have a divisor of 128, and fixes a problem with incorrectly reported fan speeds. Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06hwmon: (f71882fg) Delete needless forward declarationsJean Delvare
These functions aren't used before being defined, so there's no point in forward-declaring them. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl>
2008-08-06hwmon: (dme1737) Add support for the SMSC SCH5027Juerg Haefliger
Add support for the SCH5027. The differences to the DME1737 are: - No support for programmable temp offsets - In auto mode, PWM outputs stay on min value if temp goes below low threshold and can't be programmed to fully turn off - Different voltage scaling - No VID input Signed-off-by: Juerg Haefliger <juergh@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06hwmon: (dme1737) Skip detection if forcedJuerg Haefliger
Skip the checking of the device ID register in the hwmon register block if the force_id option is used. Signed-off-by: Juerg Haefliger <juergh@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06hwmon: (dme1737) CleanupsJuerg Haefliger
Fix names of attribute structs to make them more consistent with the rest of the code. Minor comment changes. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-06m68k/amiserial: fix fallout of tty break handling reworkGeert Uytterhoeven
commit 9e98966c7bb94355689478bc84cc3e0c190f977e (tty: rework break handling) forgot to update one exit point of rs_break() in the Amiga serial driver. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-06[WATCHDOG] more coding style clean-up'sWim Van Sebroeck
More coding style clean-up's. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-08-06kbuild: a better way to generate cscope database changeDenis ChengRq
It's a problem about cscope target of kernel Makefile, and the cscope plugin of emacs: 1. `make cscope` will generate cscope.files cscope.{in,po,}.out; 2. the cscope plugin expect a cscope.out.{in,po,}; 3. the default `cscope -b` would generate cscope.{in,po,}.out; There are three approach to solve it: 1. modify the cscope C code; 2. modify the cscope emacs plugin lisp code; 3. modify the Makefile; I have tried to communicate with the cscope upstream, but later I realize the third approach is most meaningful. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-08-06Kconfig: Extend "menuconfig" for modules to simplify Kconfig fileRobert P. J. Day
Given that the init/Kconfig file uses a "menuconfig" directive for modules already, might as well wrap all the submenu entries in an "if" to toss all those dependencies. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-08-06bugfix for scripts/patch-kernel in 2.6 sublevel steppingErkki Lintunen
scripts/patch-kernel script can't patch a tree, say, from 2.6.25 to 2.6.26.1, because of a wrong comparison in context of patching 2.6.x base. Fix it. Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-08-06kbuild: fix O=.. build with armSam Ravnborg
With a make O=... build kbuild would only create the include2/asm symlink for archs that not yet had moved headers to include/$ARCH/include There is no longer any reason to avoid the symlink for archs that has moved their headers so create it unconditionally. This fixes arm because kbuild checked for include/asm-$ARCH/errno.h and that file was not present for arm but the platform files are not yet moved. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Russell King <rmk@arm.linux.org.uk>
2008-08-06Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: async_tx: fix missing braces in async_xor_zero_sum
2008-08-06Revert duplicate "mm/hugetlb.c must #include <asm/io.h>"Linus Torvalds
This reverts commit 7cb93181629c613ee2b8f4ffe3446f8003074842, since we did that patch twice, and the problem was already fixed earlier by 78a34ae29bf1c9df62a5bd0f0798b6c62a54d520. Reported-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: Preserve response data alignment bug when it is harmless
2008-08-06Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Update generic config [IA64] Fix uniprocessor build w.r.t. SGI_XP and SGI_GRU [IA64] Eliminate trailing backquote in IA64_SGI_UV [IA64] update generic_defconfig to support sn2. [IA64] update generic_defconfig for 2.6.27-rc1 [IA64] Allow ia64 to CONFIG_NR_CPUS up to 4096 [IA64] Cleanup generated file not ignored by .gitignore [IA64] pv_ops: fix ivt.S paravirtualization