| Age | Commit message (Collapse) | Author |
|---|
|
Call tpacpi_driver_event() at the top of hotkey_notify_hotkey() for all
(orig / adaptive / extended) hotkey types, rather then having the orig
code path call tpacpi_input_send_key_masked() which calls it through
hotkey_driver_event() and having the adaptive / extended helpers call
it separately.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-12-hdegoede@redhat.com
|
|
tpacpi_input_send_key()
Move hotkey_user_mask check to tpacpi_input_send_key(), this is
a preparation patch for further refactoring.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-11-hdegoede@redhat.com
|
|
switch-case
Move the special handling (send_acpi_ev = false, hotkey_source_mask check)
for original hotkeys out of the switch-case in hotkey_notify_hotkey().
This is a preparation patch for further refactoring.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-10-hdegoede@redhat.com
|
|
tpacpi_driver_event()
Factor out the adaptive kbd non hotkey event handling into
adaptive_keyboard_change_row() and adaptive_keyboard_s_quickview_row()
helpers and move the handling of TP_HKEY_EV_DFR_CHANGE_ROW and
TP_HKEY_EV_DFR_S_QUICKVIEW_ROW to tpacpi_driver_event().
This groups all the handling of hotkey events which do not emit
a key press event together in tpacpi_driver_event().
This also drops the returning of false as known-event value when
adaptive_keyboard_get_mode() / adaptive_keyboard_set_mode() fail.
These functions already log an error on failure, returning false just
leads to an extra messgae being logged about the hkey event being
unknown, which is wrong as the event is not unknown.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-9-hdegoede@redhat.com
|
|
the event
tpacpi_driver_event() already only responds to hkey events which it knows
about. Make it return a bool and return true when it has handled the event.
This avoids the need to list TP_HKEY_EV_foo values to which it responds
both in its caller and in the function itself.
Instead callers can now call it unconditionally and check the return value.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-8-hdegoede@redhat.com
|
|
Modify hotkey_notify_hotkey() and it helpers to mostly directly operate
on hkey codes (TP_HKEY_EV_* returned by "MHKP") instead of on the 0 -
TPACPI_HOTKEY_MAP_LEN scancodes used for scancode -> keycode translation.
Keeping things in the hkey format as long a possible is a bit cleaner and
this patch prepares things for moving to sparse-keymaps.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-7-hdegoede@redhat.com
|
|
Use tpacpi_input_send_key() in adaptive_keyboard_hotkey_notify_hotkey()
instead of re-implementing it there.
Note this change will also result in a behavioral change, key presses on
the adaptive keyboard will now also send a EV_MSC event with the scancode,
just like all other hotkey presses already do. This is not a bug but
a feature.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20240424122834.19801-6-hdegoede@redhat.com
|
|
Setting ignore_acpi_ev to true has the same result as setting
send_acpi_ev to false, so there is no need to have both.
Drop ignore_acpi_ev.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-5-hdegoede@redhat.com
|
|
send_acpi_ev and ignore_acpi_ev are already initialized to true and false
respectively by hotkey_notify() before calling the various helpers. Drop
the needless re-initialization from the helpers.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20240424122834.19801-4-hdegoede@redhat.com
|
|
Provide a hotkey_poll_stop_sync() dummy implementation when
CONFIG_THINKPAD_ACPI_HOTKEY_POLL, so that the #ifdef-ery around
hotkey_poll_stop_sync() can be removed from hotkey_exit().
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-3-hdegoede@redhat.com
|
|
hotkey_exit() already takes the mutex around the hotkey_poll_stop_sync()
call, but not around the other calls.
commit 38831eaf7d4c ("platform/x86: thinkpad_acpi: use lockdep
annotations") has added lockdep_assert_held() checks to various hotkey
functions.
These lockdep_assert_held() checks fail causing WARN() backtraces in
dmesg due to missing locking in hotkey_exit(), fix this.
Fixes: 38831eaf7d4c ("platform/x86: thinkpad_acpi: use lockdep annotations")
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240424122834.19801-2-hdegoede@redhat.com
|
|
sprintf()
As Documentation/filesystems/sysfs.rst suggested,
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: yunshui <jiangyunshui@kylinos.cn>
Reviewed-by: Ai Chao <aichao@kylinos.cn>
Link: https://lore.kernel.org/r/20240422062915.3393480-1-jiangyunshui@kylinos.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
sprintf()
As Documentation/filesystems/sysfs.rst suggested,
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: yunshui <jiangyunshui@kylinos.cn>
Reviewed-by: Ai Chao <aichao@kylinos.cn>
Link: https://lore.kernel.org/r/20240419064106.2396705-1-jiangyunshui@kylinos.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
As Documentation/filesystems/sysfs.rst suggested,
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: yunshui <jiangyunshui@kylinos.cn>
Reviewed-by: Ai Chao <aichao@kylinos.cn>
Link: https://lore.kernel.org/r/20240419063649.2396461-1-jiangyunshui@kylinos.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
As Documentation/filesystems/sysfs.rst suggested,
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: yunshui <jiangyunshui@kylinos.cn>
Reviewed-by: Ai Chao <aichao@kylinos.cn>
Link: https://lore.kernel.org/r/20240417092055.1170586-1-jiangyunshui@kylinos.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The PCH names in the pmc drivers are incorrect in the comments,
fix these.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240418215202.879171-1-colin.i.king@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
If none of the clusters are added because of some error, fail to load
driver without presenting root domain. In this case root domain will
present invalid data.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 01c10f88c9b7 ("platform/x86/intel-uncore-freq: tpmi: Provide cluster level control")
Cc: <stable@vger.kernel.org> # 6.5+
Link: https://lore.kernel.org/r/20240415215210.2824868-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add depended header file to fix error on i386 due to implicit declaration
of function ‘writeq’.
Fixes: 2dc77993cb5e ("platform/x86/amd/pmc: Add AMD MP2 STB functionality")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404160320.QAHyZ0c3-lkp@intel.com/
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240416025312.731809-1-Basavaraj.Natikar@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
One of the stages in IFS image loading process involves loading individual
chunks (test patterns) from test image file to secure memory.
Driver issues a WRMSR(MSR_AUTHENTICATE_AND_COPY_CHUNK) operation to do
this. This operation can take up to 5 msec, and if an interrupt occurs
in between, the AUTH_AND_COPY_CHUNK u-code implementation aborts the
operation.
Interrupt sources such as NMI or SMI are handled by retrying. Regular
interrupts may occur frequently enough to prevent this operation from ever
completing. Disable irq on local cpu around the aforementioned WRMSR to
allow the operation to complete.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240412172349.544064-4-jithu.joseph@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In Field Scan test image files are named in ff-mm-ss-<batch02x>.scan
format. Current trace output, prints the batch number in decimal format.
Make it easier to correlate the trace line to a test image file by
showing the batch number also in hex format.
Add 0x prefix to all fields in the trace line to make the type explicit.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240412172349.544064-3-jithu.joseph@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
"Scan controller error" means that scan hardware encountered an error
prior to doing an actual test on the target CPU. It does not mean that
there is an actual cpu/core failure. "scan signature failure" indicates
that the test result on the target core did not match the expected value
and should be treated as a cpu failure.
Current driver classifies both these scenarios as failures. Modify
the driver to classify this situation with a more appropriate "untested"
status instead of "fail" status.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240412172349.544064-2-jithu.joseph@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The macros to_tlmi_pwd_setting() and to_tlmi_attr_setting() are fragile
because they expect the variable name to be 'kobj', otherwise the build
will fail because container_of()'s 3rd parameter (member) is taken from
the parameter given to the macro.
While at it, move them into a more logical place.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by Mark Pearson <mpearson-lenovo@squebbb.ca>
Link: https://lore.kernel.org/r/20240412130903.2836-1-ilpo.jarvinen@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add support to read the 'meter_current' file. The display is the same as
the 'meter_certificate', but will show the current snapshot of the
counters.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240411025856.2782476-10-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add #define for feature length and move NUL assignment from callers to
get_feature().
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240411025856.2782476-9-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix errors in the calculation of the start position of the counters and in
the display loop. While here, use a #define for the bundle count and size.
Fixes: 7fdc03a7370f ("tools/arch/x86: intel_sdsi: Add support for reading meter certificates")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240411025856.2782476-8-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fixes sdsi_meter_cert_show() to correctly decode and display the meter
certificate output. Adds and displays a missing version field, displays the
ASCII name of the signature, and fixes the print alignment.
Fixes: 7fdc03a7370f ("tools/arch/x86: intel_sdsi: Add support for reading meter certificates")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240411025856.2782476-7-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The maximum number of bundles in the meter certificate was set to 8 which
is much less than the maximum. Instead, since the bundles appear at the end
of the file, set it based on the remaining file size from the bundle start
position.
Fixes: 7fdc03a7370f ("tools/arch/x86: intel_sdsi: Add support for reading meter certificates")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240411025856.2782476-6-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The meter_certificate file provides access to metering information that may
be attested but is only updated every 8 hours. Add new attribute,
meter_current, to allow reading an untested snapshot of the current values.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240411025856.2782476-5-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
As per SDSi in-band interface specification, sec titled "BIOS lock for
in-band provisioning", when IB_LOCK bit is set in control qword, the
SDSI agent is only allowed to perform the read flow, but not allowed to
provision license blob or license key. So add check for it in
sdsi_provision().
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240411025856.2782476-4-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The current mailbox commands are either read-only or write-only and the
flow is different for each. New commands will need to send and receive
data. In preparation for these commands, create a common polling function
to handle sending data and receiving in the same transaction.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240411025856.2782476-3-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
New mailbox commands will support sending multi packet writes and updated
firmware now requires that the message size be written for all commands
along with the packet size. Since the driver doesn't perform writes larger
than the packet size, set the message size to the same value.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240411025856.2782476-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Some Thinkpads have a 'mode' button that switches between platform
profiles.
Use the new platform_module_cycle function instead of the existing
switch-based one.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/eb2484f5356786578d820301b714335221524839.1712597199.git.soyer@irl.hu
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
management key
Ideapad laptops have thermal management or performance mode switch key
(Fn + Q). They report KEY_PROG4.
If supported, cycle between platform profiles instead.
Tested on Yoga7 14ARB7.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/e5cf301ef731b037e211d468fe1d362fe3ea40ad.1712597199.git.soyer@irl.hu
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Some laptops have a key to switch platform profiles.
Add a platform_profile_cycle() function to cycle between the enabled
profiles.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/5a97deddf72aa5e764d881eb39a7ba35c01a903e.1712597199.git.soyer@irl.hu
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use GPIO_LOOKUP() macro which provides a compound literal
and can be used with dynamic data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240408153749.119394-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Lenovo Yoga Tablet 2 Pro 1380F/L is a x86 ACPI tablet which ships with
Android x86 as factory OS. Its DSDT contains a bunch of I2C devices which
are not actually there, causing various resource conflicts. Enumeration of
these is skipped through the acpi_quirk_skip_i2c_client_enumeration().
Add support for manually instantiating the I2C + other devices which are
actually present on this tablet by adding the necessary device info to
the x86-android-tablets module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240406125058.13624-2-hdegoede@redhat.com
|
|
Not all subsystems support a device getting removed while there are
still consumers of the device with a reference to the device.
One example of this is the regulator subsystem. If a regulator gets
unregistered while there are still drivers holding a reference
a WARN() at drivers/regulator/core.c:5829 triggers, e.g.:
WARNING: CPU: 1 PID: 1587 at drivers/regulator/core.c:5829 regulator_unregister
Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLADE_21.X64.0005.R00.1504101516 FFD8_X64_R_2015_04_10_1516 04/10/2015
RIP: 0010:regulator_unregister
Call Trace:
<TASK>
regulator_unregister
devres_release_group
i2c_device_remove
device_release_driver_internal
bus_remove_device
device_del
device_unregister
x86_android_tablet_remove
On the Lenovo Yoga Tablet 2 series the bq24190 charger chip also provides
a 5V boost converter output for powering USB devices connected to the micro
USB port, the bq24190-charger driver exports this as a Vbus regulator.
On the 830 (8") and 1050 ("10") models this regulator is controlled by
a platform_device and x86_android_tablet_remove() removes platform_device-s
before i2c_clients so the consumer gets removed first.
But on the 1380 (13") model there is a lc824206xa micro-USB switch
connected over I2C and the extcon driver for that controls the regulator.
The bq24190 i2c-client *must* be registered first, because that creates
the regulator with the lc824206xa listed as its consumer. If the regulator
has not been registered yet the lc824206xa driver will end up getting
a dummy regulator.
Since in this case both the regulator provider and consumer are I2C
devices, the only way to ensure that the consumer is unregistered first
is to unregister the I2C devices in reverse order of in which they were
created.
For consistency and to avoid similar problems in the future change
x86_android_tablet_remove() to unregister all device types in reverse
order.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240406125058.13624-1-hdegoede@redhat.com
|
|
AMD MP2 STB function provides a data buffer used to log debug information
about the system execution during S2Idle suspend/resume.
A data buffer known as the STB (Smart Trace Buffer) is a circular buffer
which is a low-level log to assist in debugging by providing insights
into any potential hangs or stalls that may occur during the S2Idle
suspend/resume processes.
The current PMC driver retrieves STB data from MP1, but there can be
scenarios where MP1 might hang or become unresponsive, leading to the
loss of critical data present in the STB buffer. This defeats the purpose
of the STB buffer, which was originally meant to help identify system
failures.
This feature creates stb_read_previous_boot debugfs allows users to
retrieve the STB log from MP2 specifically from the last occurrence of
the S2Idle suspend/resume. A userspace daemon can access STB log of last
S2Idle suspend/resume which can help to troubleshoot potential issues
related to hangs or stalls during the S2Idle suspend/resume sequence.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240404090702.325838-1-Basavaraj.Natikar@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Some Ideapad/Yoga Laptops have an FnLock LED in the Esc key.
Expose Fnlock as an LED class device for easier OSD support.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/2db08c948568a8d5352780864956c3271b4e42ce.1712063200.git.soyer@irl.hu
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The FnLock is retrieved and set in several places in the code.
Move details into ideapad_fn_lock_get and ideapad_fn_lock_set functions.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/dfd3a62a2b71339bbddf01e8a2ccd5ca92ce7202.1712063200.git.soyer@irl.hu
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Newer laptops have FnLock LED.
Add a define for this very common function.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/8ac95e85a53dc0b8cce1e27fc1cab6d19221543b.1712063200.git.soyer@irl.hu
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Reorganises some attr-available calls to remove a few unrequired
booleans in the main driver struct which combined with some
reorganisation prevents a series of large holes seen with pahole.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240404001652.86207-10-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add support for an MCU powersave WMI call. This is intended to set the
MCU in to a low-power mode when sleeping. This mode can cut sleep power
use by around half.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240404001652.86207-9-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The previous work to allow the MCU to be resumed correctly after sleep
and resume tried to take the shortest possible time. However as work
continues in various other parts of the s2idle subsystems it has shown
that it wasn't entirely reliable.
If the MCU disable/enable call is done correctly the MCU fully removes
its USB endpoints, and this shows as a full USB device reconnection on
resume. When we tried to short this as much as possible sometimes the
MCU doesn't get to complete what it needs to do before going to low-power
and this affected the reconnection.
Through trial it is found that the minimum time required is approx 1200ms
to allow a proper disconnect and disable, and the same amount of time on
resume is required to prevent a rapid disconnect/reconnect happening on
seemingly random occasions. To be safe the time is now 1500ms for msleep.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240404001652.86207-8-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Shift the call to dev_get_drvdata() up to top of the function block
in all of the ppt_<name>() functions as part of a minor cleanup.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240404001652.86207-7-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Laptops with any of the ppt or nv tunables default to the minimum setting
on boot so we can safely assume a stored value is correct.
This patch adds storing of those values in the local struct, and enables
reading of those values back. To prevent creating a series of byte holes
in the struct the "<name>_available" bool is removed and
`asus_sysfs_is_visible()` uses the `ASUS_WMI_DEVID_<name>` directly.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240404001652.86207-6-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add support for toggling the BIOS POST sound on some ASUS laptops.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240404001652.86207-5-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Adds support for a second TUF RGB wmi call that some versions of the TUF
laptop come with. Also adjusts existing support to select whichever is
available.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240404001652.86207-4-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add support for the Vivobook dgpu MUX available on the ASUS Viviobook
and some of the other ranges (Zen).
This MUX functions exactly the same as the existing ROG MUX support so
the existing functionality now detects which MUX is available and uses
that for control.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240404001652.86207-3-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Support the 2024 mini-led backlight and adjust the related functions
to select the relevant dev-id. Also add `available_mini_led_mode` to the
platform sysfs since the available mini-led levels can be different.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240404001652.86207-2-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
