| Age | Commit message (Collapse) | Author |
|---|
|
Assert in test_run_timeout was not updated with the build_dir argument
and caused the following error:
AssertionError: Expected call: run_kernel(timeout=3453)
Actual call: run_kernel(build_dir=None, timeout=3453)
Needed to update kunit_tool_test to reflect this fix
https://lkml.org/lkml/2019/9/6/351
Signed-off-by: Heidi Fahim <heidifahim@google.com>
Reviewed-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Fixes the issue caused by the fact that in C in the expression
of the form -1234L only 1234L is the actual literal, the unary
minus is an operation applied to the literal. Which means that
to express the lower bound for the type one has to negate the
upper bound and subtract 1.
Original error:
Expected test_data[i].expected.tv_sec == timestamp.tv_sec, but
test_data[i].expected.tv_sec == -2147483648
timestamp.tv_sec == 2147483648
1901-12-13 Lower bound of 32bit < 0 timestamp, no extra bits: msb:1
lower_bound:1 extra_bits: 0
Expected test_data[i].expected.tv_sec == timestamp.tv_sec, but
test_data[i].expected.tv_sec == 2147483648
timestamp.tv_sec == 6442450944
2038-01-19 Lower bound of 32bit <0 timestamp, lo extra sec bit on:
msb:1 lower_bound:1 extra_bits: 1
Expected test_data[i].expected.tv_sec == timestamp.tv_sec, but
test_data[i].expected.tv_sec == 6442450944
timestamp.tv_sec == 10737418240
2174-02-25 Lower bound of 32bit <0 timestamp, hi extra sec bit on:
msb:1 lower_bound:1 extra_bits: 2
not ok 1 - inode_test_xtimestamp_decoding
not ok 1 - ext4_inode_test
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Iurii Zaikin <yzaikin@google.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The MDIO node on Cygnus had an reversed #address-cells and
#size-cells properties, correct those.
Fixes: 40c26d3af60a ("ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY")
Reported-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Raspberry Pi's firmware has a feature to select how much memory to
reserve for its GPU called 'gpu_mem'. The possible values go from 16MB
to 944MB, with a default of 64MB. This memory resides in the topmost
part of the lower 1GB memory area and grows bigger expanding towards the
begging of memory.
It turns out that with low 'gpu_mem' values (16MB and 32MB) the size of
the memory available to the system in the lower 1GB area can outgrow the
interconnect's dma-range as its size was selected based on the maximum
system memory available given the default gpu_mem configuration. This
makes that memory slice unavailable for DMA. And may cause nasty kernel
warnings if CMA happens to include it.
Change soc's dma-ranges to really reflect it's HW limitation, which is
being able to only DMA to the lower 1GB area.
Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Commit 9f532d26c75c ("ARM: exynos_defconfig: Trim and reorganize with
savedefconfig") removed explicit enable line for CONFIG_DEBUG_FS, because
that feature has been selected by other enabled options: CONFIG_TRACING,
which in turn had been selected by CONFIG_PERF_EVENTS and
CONFIG_PROVE_LOCKING.
In meantime, commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS
dependency") removed the dependency between CONFIG_DEBUG_FS and
CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds.
Enable it again explicitly, as debugfs support is essential for various
automated testing tools.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Samsung SoC (S3C, S5P and Exynos) serial driver does not have dedicated
reviewing person so some patches might be missed be Samsung-related
folks (e.g. not even reaching Samsung SoC mailing list). Include them
in generic Samsung SoC maintainer entry to provide some level of
reviewing and care. This will not change handling of patches (via
serial tree).
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Newer versions of awk spit out these fun warnings:
awk: ../lib/raid6/unroll.awk:16: warning: regexp escape sequence `\#' is not a known regexp operator
As commit 700c1018b86d ("x86/insn: Fix awk regexp warnings") showed, it
turns out that there are a number of awk strings that do not need to be
escaped and newer versions of awk now warn about this.
Fix the string up so that no warning is produced. The exact same kernel
module gets created before and after this patch, showing that it wasn't
needed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20191206152600.GA75093@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix Makefile to set safesetid-test.sh to TEST_PROGS instead
of non existing run_tests.sh.
Without this fix, I got following error.
----
TAP version 13
1..1
# selftests: safesetid: run_tests.sh
# Warning: file run_tests.sh is missing!
not ok 1 selftests: safesetid: run_tests.sh
----
Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Check the return value of setuid() and setgid().
This fixes the following warnings and improves test result.
safesetid-test.c: In function ‘main’:
safesetid-test.c:294:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
setuid(NO_POLICY_USER);
^~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:295:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result]
setgid(NO_POLICY_USER);
^~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:309:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
setuid(RESTRICTED_PARENT);
^~~~~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:310:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result]
setgid(RESTRICTED_PARENT);
^~~~~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c: In function ‘test_setuid’:
safesetid-test.c:216:3: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
setuid(child_uid);
^~~~~~~~~~~~~~~~~
Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Move -lcap to LDLIBS from CFLAGS because it is a library
to be linked.
Without this, safesetid failed to build with link error
as below.
----
/usr/bin/ld: /tmp/ccL8rZHT.o: in function `drop_caps':
safesetid-test.c:(.text+0xe7): undefined reference to `cap_get_proc'
/usr/bin/ld: safesetid-test.c:(.text+0x107): undefined reference to `cap_set_flag'
/usr/bin/ld: safesetid-test.c:(.text+0x10f): undefined reference to `cap_set_proc'
/usr/bin/ld: safesetid-test.c:(.text+0x117): undefined reference to `cap_free'
/usr/bin/ld: safesetid-test.c:(.text+0x136): undefined reference to `cap_clear'
collect2: error: ld returned 1 exit status
----
Fixes: c67e8ec03f3f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Fix multiple kprobe event testcase to work it correctly.
There are 2 bugfixes.
- Since `wc -l FILE` returns not only line number but also
FILE filename, following "if" statement always failed.
Fix this bug by replacing it with 'cat FILE | wc -l'
- Since "while do-done loop" block with pipeline becomes a
subshell, $N local variable is not update outside of
the loop.
Fix this bug by using actual target number (256) instead
of $N.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Use relative path to trigger file instead of absolute debugfs path,
because if the user uses tracefs instead of debugfs, it can be
mounted at /sys/kernel/tracing.
Anyway, since the ftracetest is designed to be run at the tracing
directory, user doesn't need to use absolute path.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Since dynamic function tracer can be disabled, set_ftrace_filter
can be disappeared. Test cases which depends on it, must check
whether the set_ftrace_filter exists or not before testing
and if not, return as unsupported.
Also, if the function tracer itself is disabled, we can not
set "function" to current_tracer. Test cases must check it
before testing, and return as unsupported.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
If we run ftracetest on the kernel with CONFIG_DYNAMIC_FTRACE=n,
there is no set_ftrace_filter and all test cases are failed, because
reset_ftrace_filter() returns an error.
Let's check whether set_ftrace_filter exists in reset_ftrace_filter()
and clean up only set_ftrace_notrace in initialize_ftrace().
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Update Lukasz Luba's email address to @arm.com in MAINTAINERS and map it
correctly in .mailmap file.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
The MDIO node on BCM5301X had an reversed #address-cells and
#size-cells properties, correct those, silencing checker warnings:
.../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected
Reported-by: Simon Horman <simon.horman@netronome.com>
Fixes: 23f1eca6d59b ("ARM: dts: BCM5301X: Specify MDIO bus in the DT")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
ARMv7 Vexpress fixes for v5.5
Switching the cpumask from topology core to OPP sharing, as the topology
core cpumask can be modified during cpu hotplug to avoid setting up
wrong cpufreq policy cpumask.
* tag 'vexpress-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
cpufreq: vexpress-spc: Switch cpumask from topology core to OPP sharing
ARM: vexpress: Set-up shared OPP table instead of individual for each CPU
Link: https://lore.kernel.org/r/20191209140037.GC25155@bogus
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The driver forgets to call unregister_pernet_subsys() in the error path
of cma_init().
Add the missed call to fix it.
Fixes: 4be74b42a6d0 ("IB/cma: Separate port allocation to network namespaces")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Link: https://lore.kernel.org/r/20191206012426.12744-1-hslester96@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Because the BLAKE2B code went through a different tree, it was not
available at the time the btrfs part was merged. Now that the Kconfig
symbol exists, add it to the list.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Make the AFS dynamic root superblock R/W so that SELinux can set the
security label on it. Without this, upgrades to, say, the Fedora
filesystem-afs RPM fail if afs is mounted on it because the SELinux label
can't be (re-)applied.
It might be better to make it possible to bypass the R/O check for LSM
label application through setxattr.
Fixes: 4d673da14533 ("afs: Support the AFS dynamic root")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: selinux@vger.kernel.org
cc: linux-security-module@vger.kernel.org
|
|
afs_find_server tries to find a server that has an address that
matches the transport address of an rxrpc peer. The code assumes
that the transport address is always ipv6, with ipv4 represented
as ipv4 mapped addresses, but that's not the case. If the transport
family is AF_INET, srx->transport.sin6.sin6_addr.s6_addr32[] will
be beyond the actual ipv4 address and will always be 0, and all
ipv4 addresses will be seen as matching.
As a result, the first ipv4 address seen on any server will be
considered a match, and the server returned may be the wrong one.
One of the consequences is that callbacks received over ipv4 will
only be correctly applied for the server that happens to have the
first ipv4 address on the fs_addresses4 list. Callbacks over ipv4
from all other servers are dropped, causing the client to serve stale
data.
This is fixed by looking at the transport family, and comparing ipv4
addresses based on a sockaddr_in structure rather than a sockaddr_in6.
Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
As virtual_context_destroy() may be called from a request signal, it may
be called from inside an irq-off section, and so we need to do a full
save/restore of the irq state rather than blindly re-enable irqs upon
unlocking.
<4> [110.024262] WARNING: inconsistent lock state
<4> [110.024277] 5.4.0-rc8-CI-CI_DRM_7489+ #1 Tainted: G U
<4> [110.024292] --------------------------------
<4> [110.024305] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
<4> [110.024323] kworker/0:0/5 [HC0[0]:SC0[0]:HE1:SE1] takes:
<4> [110.024338] ffff88826a0c7a18 (&(&rq->lock)->rlock){?.-.}, at: i915_request_retire+0x221/0x930 [i915]
<4> [110.024592] {IN-HARDIRQ-W} state was registered at:
<4> [110.024612] lock_acquire+0xa7/0x1c0
<4> [110.024627] _raw_spin_lock_irqsave+0x33/0x50
<4> [110.024788] intel_engine_breadcrumbs_irq+0x38c/0x600 [i915]
<4> [110.024808] irq_work_run_list+0x49/0x70
<4> [110.024824] irq_work_run+0x26/0x50
<4> [110.024839] smp_irq_work_interrupt+0x44/0x1e0
<4> [110.024855] irq_work_interrupt+0xf/0x20
<4> [110.024871] __do_softirq+0xb7/0x47f
<4> [110.024885] irq_exit+0xba/0xc0
<4> [110.024898] do_IRQ+0x83/0x160
<4> [110.024910] ret_from_intr+0x0/0x1d
<4> [110.024922] irq event stamp: 172864
<4> [110.024938] hardirqs last enabled at (172863): [<ffffffff819ea214>] _raw_spin_unlock_irq+0x24/0x50
<4> [110.024963] hardirqs last disabled at (172864): [<ffffffff819e9fba>] _raw_spin_lock_irq+0xa/0x40
<4> [110.024988] softirqs last enabled at (172812): [<ffffffff81c00385>] __do_softirq+0x385/0x47f
<4> [110.025012] softirqs last disabled at (172797): [<ffffffff810b829a>] irq_exit+0xba/0xc0
<4> [110.025031]
other info that might help us debug this:
<4> [110.025049] Possible unsafe locking scenario:
<4> [110.025065] CPU0
<4> [110.025075] ----
<4> [110.025084] lock(&(&rq->lock)->rlock);
<4> [110.025099] <Interrupt>
<4> [110.025109] lock(&(&rq->lock)->rlock);
<4> [110.025124]
*** DEADLOCK ***
<4> [110.025144] 4 locks held by kworker/0:0/5:
<4> [110.025156] #0: ffff88827588f528 ((wq_completion)events){+.+.}, at: process_one_work+0x1de/0x620
<4> [110.025187] #1: ffffc9000006fe78 ((work_completion)(&engine->retire_work)){+.+.}, at: process_one_work+0x1de/0x620
<4> [110.025219] #2: ffff88825605e270 (&kernel#2){+.+.}, at: engine_retire+0x57/0xe0 [i915]
<4> [110.025405] #3: ffff88826a0c7a18 (&(&rq->lock)->rlock){?.-.}, at: i915_request_retire+0x221/0x930 [i915]
<4> [110.025634]
stack backtrace:
<4> [110.025653] CPU: 0 PID: 5 Comm: kworker/0:0 Tainted: G U 5.4.0-rc8-CI-CI_DRM_7489+ #1
<4> [110.025675] Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0054.2017.1025.1822 10/25/2017
<4> [110.025856] Workqueue: events engine_retire [i915]
<4> [110.025872] Call Trace:
<4> [110.025891] dump_stack+0x71/0x9b
<4> [110.025907] mark_lock+0x49a/0x500
<4> [110.025926] ? print_shortest_lock_dependencies+0x200/0x200
<4> [110.025946] mark_held_locks+0x49/0x70
<4> [110.025962] ? _raw_spin_unlock_irq+0x24/0x50
<4> [110.025978] lockdep_hardirqs_on+0xa2/0x1c0
<4> [110.025995] _raw_spin_unlock_irq+0x24/0x50
<4> [110.026171] virtual_context_destroy+0xc5/0x2e0 [i915]
<4> [110.026376] __active_retire+0xb4/0x290 [i915]
<4> [110.026396] dma_fence_signal_locked+0x9e/0x1b0
<4> [110.026613] i915_request_retire+0x451/0x930 [i915]
<4> [110.026766] retire_requests+0x4d/0x60 [i915]
<4> [110.026919] engine_retire+0x63/0xe0 [i915]
Fixes: b1e3177bd1d8 ("drm/i915: Coordinate i915_active with its own mutex")
Fixes: 6d06779e8672 ("drm/i915: Load balancing across a virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205145934.663183-1-chris@chris-wilson.co.uk
(cherry picked from commit 6f7ac8285371fb0df58aba861eaab387f79ed04d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Since commit ca74b316df96 ("arm: Use common cpu_topology structure and
functions.") the core cpumask has to be modified during cpu hotplug
operations. So using them to set up cpufreq policy cpumask may be
incorrect as it may contain only cpus that are online at that instance.
Instead, we can use the cpumask setup by OPP library that contains all
the cpus sharing OPP table using dev_pm_opp_get_sharing_cpus.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Currently we add individual copy of same OPP table for each CPU within
the cluster. This is redundant and doesn't reflect the reality.
We can't use core cpumask to set policy->cpus in ve_spc_cpufreq_init()
anymore as it gets called via cpuhp_cpufreq_online()->cpufreq_online()
->cpufreq_driver->init() and the cpumask gets updated upon CPU hotplug
operations. It also may cause issues when the vexpress_spc_cpufreq
driver is built as a module.
Since ve_spc_clk_init is built-in device initcall, we should be able to
use the same topology_core_cpumask to set the opp sharing cpumask via
dev_pm_opp_set_sharing_cpus and use the same later in the driver via
dev_pm_opp_get_sharing_cpus.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Commit 259231a04561 ("cpuidle: add poll_limit_ns to cpuidle_device
structure") changed, by mistake, the target residency from the first
available sleep state to the last available sleep state (which should
be longer).
This might cause excessive polling.
Fixes: 259231a04561 ("cpuidle: add poll_limit_ns to cpuidle_device structure")
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull devfreq updates for 5.5-rc1 from Chanwoo Choi:
"Update devfreq core:
- Add PM QoS support for devfreq device with following QoS type.
External user of devfreq device can request the minimum and
maximum frequency according to their multiple requirements.
: DEV_PM_QOS_MIN_FREQUENCY is used for requesting the minimum
device frequency.
: DEV_PM_QOS_MAX_FREQUENCY is used for requesting the maximum
device frequency.
- Use PM QoS interface when entering the min/max_freq via sysfs
interface.
- Add get_freq_range() helper function in order to get the final
min/max frequency among the multiple requirements of min/max
frequency.
- Fix a function return value and modify code for more correct
exception handling if errors happen."
* tag 'devfreq-fixes-for-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: Use PM QoS for sysfs min/max_freq
PM / devfreq: Add PM QoS support
PM / devfreq: Don't fail devfreq_dev_release if not in list
PM / devfreq: Introduce get_freq_range helper
PM / devfreq: Set scaling_max_freq to max on OPP notifier error
PM / devfreq: Fix devfreq_notifier_call returning errno
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First set of fixes for IIO in the 5.5 cycle.
Mixture of old things people have just hit, and a few late breaking
issues with things that went in during the merge window.
Being sent promptly to resolve potential DT breakage causing
issues for binding test builds.
* ad7606
- Avoid reading extra data from the device over what was intended.
* ad7124
- Enable the internal reference when in use.
* ad7292
- Fix up license for newly added binding. Better to not have this go
out in a release with more limited header than intended.
- Fix a constraint on number of channels.
* ad7949
- Fix an issue which can result in readouts being from the wrong channel.
* hdc100x
- Fix wrong ABI usage (units) for relative humidity channel.
* intel mrfld
- Allocate right amount of private data (currently allocating too much).
* ltc2983
- Avoid a potential issue with machine endianness and wrong length device
tree read.
* max1027
- Clean up leak of an iio_trigger on probe failure.
* max9611
- Ensure we sleep long enough to successfully initialize the sensor.
* mpu6050
- Fix wrong ABI usage (units) for temperature channel.
* st_accel
- Fix an unused variable warning.
* st_lsm6dsx
- Fix decimation factor issue that can lead to missaligned datasets
(and hence garbage)
- Fix an issue with how we track enabled fifo channels.
- Avoid powering off the device if wake up events are enabled.
* tag 'iio-fixes-for-5.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: adc: max9611: Fix too short conversion time delay
iio: ad7949: fix channels mixups
iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask
iio: imu: st_lsm6dsx: fix decimation factor estimation
iio: imu: inv_mpu6050: fix temperature reporting using bad unit
iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting
iio: adc: max1027: fix not unregistered iio trigger
iio: adc: intel_mrfld_adc: Allocating too much data in probe()
iio: adc: ad7124: Enable internal reference
dt-bindings: iio: adc: ad7292: fix constraint over channel quantity
dt-bindings: iio: adc: ad7292: Update SPDX identifier
iio: temperature: ltc2983: fix u32 read into a unsigned long long
iio: st_accel: Fix unused variable warning
iio: adc: ad7606: fix reading unnecessary data from device
|
|
A64-OLinuXino uses DCDC1 (VCC-IO) for MMC1 supply. In commit 916b68cfe4b5
("arm64: dts: a64-olinuxino: Enable RTL8723BS WiFi") ALDO2 is set, which is
VCC-PL. Since DCDC1 is always present, the boards are working without a
problem.
This patch sets the correct regulator.
Fixes: 916b68cfe4b5 ("arm64: dts: a64-olinuxino: Enable RTL8723BS WiFi")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
A64-OLinuXino-eMMC uses 1.8V for eMMC supply. This is done via a triple
jumper, which sets VCC-PL to either 1.8V or 3.3V. This setting is different
for boards with and without eMMC.
This is not a big issue for DDR52 mode, however the eMMC will not work in
HS200/HS400, since these modes explicitly requires 1.8V.
Fixes: 94f68f3a4b2a ("arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)")
Cc: stable@vger.kernel.org # v5.4
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
With commit 222ec1618c3ace ("drm: Add aspect ratio parsing in DRM
layer") the drm core started honoring the picture_aspect_ratio field
when comparing two drm_display_modes. Prior to that it was ignored.
When the CVBS encoder driver was initially submitted there was no aspect
ratio check.
Switch from drm_mode_equal() to drm_mode_match() without
DRM_MODE_MATCH_ASPECT_RATIO to fix "kmscube" and X.org output using the
CVBS connector. When (for example) kmscube sets the output mode when
using the CVBS connector it passes HDMI_PICTURE_ASPECT_NONE, making the
drm_mode_equal() fail as it include the aspect ratio.
Prior to this patch kmscube reported:
failed to set mode: Invalid argument
The CVBS mode checking in the sun4i (drivers/gpu/drm/sun4i/sun4i_tv.c
sun4i_tv_mode_to_drm_mode) and ZTE (drivers/gpu/drm/zte/zx_tvenc.c
tvenc_mode_{pal,ntsc}) drivers don't set the "picture_aspect_ratio" at
all. The Meson VPU driver does not rely on the aspect ratio for the CVBS
output so we can safely decouple it from the hdmi_picture_aspect
setting.
Cc: <stable@vger.kernel.org>
Fixes: 222ec1618c3ace ("drm: Add aspect ratio parsing in DRM layer")
Fixes: bbbe775ec5b5da ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: squashed with drm: meson: venc: cvbs: deduplicate the meson_cvbs_mode lookup code]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191208171832.1064772-3-martin.blumenstingl@googlemail.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- A fix for a memory leak in the dma-buf support
- One in mcde DSI support that leads to a pointer dereference
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125094336.GA14723@gilmour.lan
|
|
Mutex is doubly unlocked in some error path of pcm.open. This commit fixes
ALSA firewire-motu driver in Linux kernel v5.5.
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 3fd80b200388 ("ALSA: firewire-motu: use the same size of period for PCM substream in AMDTP streams")
Fixes: 0f5482e7875b ("ALSA: firewire-motu: share PCM buffer size for both direction")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191208232226.6685-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is some warning if TTY is not enabled, and lead to
build error, only select serial sifive if TTY enabled, and
this also makes randconfig happy.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[paul.walmsley@sifive.com: updated to apply]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
The Makefile addition for the flat image loader missed an obj prefix.
For most parallel builds this worked out fine, but with -j1 the dependency
wasn't fulfilled and thus fails:
arch/riscv/boot/loader.S: Assembler messages:
arch/riscv/boot/loader.S:7: Error: file not found: arch/riscv/boot/Image
Fixes: 405fe7aa0dba ("riscv: provide a flat image loader")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Switch the handling of min_freq and max_freq from sysfs to use the
dev_pm_qos_request interface.
Since PM QoS handles frequencies as kHz this change reduces the
precision of min_freq and max_freq. This shouldn't introduce problems
because frequencies which are not an integer number of kHz are likely
not an integer number of Hz either.
Try to ensure compatibility by rounding min values down and rounding
max values up.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
[cw00.choi: Return -EAGAIN instead of -EINVAL if dev_pm_qos is inactive]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Register notifiers with the PM QoS framework in order to respond to
requests for DEV_PM_QOS_MIN_FREQUENCY and DEV_PM_QOS_MAX_FREQUENCY.
No notifiers are added by this patch but PM QoS constraints can be
imposed externally (for example from other devices).
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Right now devfreq_dev_release will print a warning and abort the rest of
the cleanup if the devfreq instance is not part of the global
devfreq_list. But this is a valid scenario, for example it can happen if
the governor can't be found or on any other init error that happens
after device_register.
Initialize devfreq->node to an empty list head in devfreq_add_device so
that list_del becomes a safe noop inside devfreq_dev_release and we can
continue the rest of the cleanup.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Moving handling of min/max freq to a single function and call it from
update_devfreq and for printing min/max freq values in sysfs.
This changes the behavior of out-of-range min_freq/max_freq: clamping
is now done at evaluation time. This means that if an out-of-range
constraint is imposed by sysfs and it later becomes valid then it will
be enforced.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The devfreq_notifier_call functions will update scaling_min_freq and
scaling_max_freq when the OPP table is updated.
If fetching the maximum frequency fails then scaling_max_freq remains
set to zero which is confusing. Set to ULONG_MAX instead so we don't
need special handling for this case in other places.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Notifier callbacks shouldn't return negative errno but one of the
NOTIFY_OK/DONE/BAD values.
The OPP core will ignore return values from notifiers but returning a
value that matches NOTIFY_STOP_MASK will stop the notification chain.
Fix by always returning NOTIFY_OK.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The power button was only producing irqs, but no key events,
Forced power down with long key press works, so probably
only a short spike arrives at the SoC.
Further investigation shows that LDORTC2 is off after boot
of the vendor kernel. LDORTC2 is shared with a GPIO at the pmic
which probably transfers the button press to the SoC.
That regulator off at boot, so "regulator-boot-on" is definitively
wrong. So remove that.
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Fixes: c100ea86e6ab ("ARM: dts: add Netronix E60K02 board common file")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Without this "jedec,spi-nor" compatible property, probing of the SPI NOR
does not work on the NXP i.MX6ULL EVK. Fix this by adding this
compatible property to the DT.
Fixes: 7d77b8505aa9 ("ARM: dts: imx6ull: fix the imx6ull-14x14-evk configuration")
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
|
|
Pull networking fixes from David Miller:
1) More jumbo frame fixes in r8169, from Heiner Kallweit.
2) Fix bpf build in minimal configuration, from Alexei Starovoitov.
3) Use after free in slcan driver, from Jouni Hogander.
4) Flower classifier port ranges don't work properly in the HW offload
case, from Yoshiki Komachi.
5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin.
6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk.
7) Fix flow dissection in dsa TX path, from Alexander Lobakin.
8) Stale syncookie timestampe fixes from Guillaume Nault.
[ Did an evil merge to silence a warning introduced by this pull - Linus ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
r8169: fix rtl_hw_jumbo_disable for RTL8168evl
net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()
r8169: add missing RX enabling for WoL on RTL8125
vhost/vsock: accept only packets with the right dst_cid
net: phy: dp83867: fix hfs boot in rgmii mode
net: ethernet: ti: cpsw: fix extra rx interrupt
inet: protect against too small mtu values.
gre: refetch erspan header from skb->data after pskb_may_pull()
pppoe: remove redundant BUG_ON() check in pppoe_pernet
tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
tcp: tighten acceptance of ACKs not matching a child socket
tcp: fix rejected syncookies due to stale timestamps
lpc_eth: kernel BUG on remove
tcp: md5: fix potential overestimation of TCP option space
net: sched: allow indirect blocks to bind to clsact in TC
net: core: rename indirect block ingress cb function
net-sysfs: Call dev_hold always in netdev_queue_add_kobject
net: dsa: fix flow dissection on Tx path
net/tls: Fix return values to avoid ENOTSUPP
net: avoid an indirect call in ____sys_recvmsg()
...
|
|
Pull more SCSI updates from James Bottomley:
"Eleven patches, all in drivers (no core changes) that are either minor
cleanups or small fixes.
They were late arriving, but still safe for -rc1"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry
scsi: megaraid_sas: Make poll_aen_lock static
scsi: sd_zbc: Improve report zones error printout
scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI
scsi: qla2xxx: unregister ports after GPN_FT failure
scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan
scsi: pm80xx: Remove unused include of linux/version.h
scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3
scsi: scsi_transport_sas: Fix memory leak when removing devices
scsi: lpfc: size cpu map by last cpu id set
scsi: ibmvscsi_tgt: Remove unneeded variable rc
|
|
Pull cifs fixes from Steve French:
"Nine cifs/smb3 fixes:
- one fix for stable (oops during oplock break)
- two timestamp fixes including important one for updating mtime at
close to avoid stale metadata caching issue on dirty files (also
improves perf by using SMB2_CLOSE_FLAG_POSTQUERY_ATTRIB over the
wire)
- two fixes for "modefromsid" mount option for file create (now
allows mode bits to be set more atomically and accurately on create
by adding "sd_context" on create when modefromsid specified on
mount)
- two fixes for multichannel found in testing this week against
different servers
- two small cleanup patches"
* tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: improve check for when we send the security descriptor context on create
smb3: fix mode passed in on create for modetosid mount option
cifs: fix possible uninitialized access and race on iface_list
cifs: Fix lookup of SMB connections on multichannel
smb3: query attributes on file close
smb3: remove unused flag passed into close functions
cifs: remove redundant assignment to pointer pneg_ctxt
fs: cifs: Fix atime update check vs mtime
CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs cleanups from Al Viro:
"No common topic, just three cleanups".
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make __d_alloc() static
fs/namespace: add __user to open_tree and move_mount syscalls
fs/fnctl: fix missing __user in fcntl_rw_hint()
|
|
As of commit b9ddd5091160793e ("iio: adc: max9611: Fix temperature
reading in probe"), max9611 initialization sometimes fails on the
Salvator-X(S) development board with:
max9611 4-007f: Invalid value received from ADC 0x8000: aborting
max9611: probe of 4-007f failed with error -5
The max9611 driver tests communications with the chip by reading the die
temperature during the probe function, which returns an invalid value.
According to the datasheet, the typical ADC conversion time is 2 ms, but
no minimum or maximum values are provided. Maxim Technical Support
confirmed this was tested with temperature Ta=25 degreeC, and promised
to inform me if a maximum/minimum value is available (they didn't get
back to me, so I assume it is not).
However, the driver assumes a 1 ms conversion time. Usually the
usleep_range() call returns after more than 1.8 ms, hence it succeeds.
When it returns earlier, the data register may be read too early, and
the previous measurement value will be returned. After boot, this is
the temperature POR (power-on reset) value, causing the failure above.
Fix this by increasing the delay from 1000-2000 µs to 3000-3300 µs.
Note that this issue has always been present, but it was exposed by the
aformentioned commit.
Fixes: 69780a3bbc0b1e7e ("iio: adc: Add Maxim max9611 ADC driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Each time we need to read a sample (from the sysfs interface, since the
driver supports only it) the driver writes the configuration register
with the proper settings needed to perform the said read, then it runs
another xfer to actually read the resulting value. Most notably the
configuration register is updated to set the ADC internal MUX depending by
which channel the read targets.
Unfortunately this seems not enough to ensure correct operation because
the ADC works in a pipelined-like fashion and the new configuration isn't
applied in time.
The ADC alternates two phases: acquisition and conversion. During the
acquisition phase the ADC samples the analog signal in an internal
capacitor; in the conversion phase the ADC performs the actual analog to
digital conversion of the stored voltage. Note that of course the MUX
needs to be set to the proper channel when the acquisition phase is
performed.
Once the conversion phase has been completed, the device automatically
switches back to a new acquisition; on the other hand the device switches
from acquisition to conversion on the rising edge of SPI cs signal (that
is when the xfer finishes).
Only after both two phases have been completed (with the proper settings
already written in the configuration register since the beginning) it is
possible to read the outcome from SPI bus.
With the current driver implementation, we end up in the following
situation:
_______ 1st xfer ____________ 2nd xfer ___________________
SPI cs.. \_________/ \_________/
SPI rd.. idle |(val N-2)+ idle | val N-1 + idle ...
SPI wr.. idle | cfg N + idle | (X) + idle ...
------------------------ + -------------------- + ------------------
AD .. acq N-1 + cnv N-1 | acq N + cnv N | acq N+1
As shown in the diagram above, the value we read in the Nth read belongs
to configuration setting N-1.
In case the configuration is not changed (config[N] == config[N-1]), then
we still get correct data, but in case the configuration changes (i.e.
switching the MUX on another channel), we get wrong data (data from the
previously selected channel).
This patch fixes this by performing one more "dummy" transfer in order to
ending up in reading the data when it's really ready, as per the following
timing diagram.
_______ 1st xfer ____________ 2nd xfer ___________ 3rd xfer ___
SPI cs.. \_________/ \_________/ \_________/
SPI rd.. idle |(val N-2)+ idle |(val N-1)+ idle | val N + ..
SPI wr.. idle | cfg N + idle | (X) + idle | (X) + ..
------------------------ + -------------------- + ------------------- + --
AD .. acq N-1 + cnv N-1 | acq N + cnv N | acq N+1 | ..
NOTE: in the latter case (cfg changes), the acquisition phase for the
value to be read begins after the 1st xfer, that is after the read request
has been issued on sysfs. On the other hand, if the cfg doesn't change,
then we can refer to the fist diagram assuming N == (N - 1); the
acquisition phase _begins_ before the 1st xfer (potentially a lot of time
before the read has been issued via sysfs, but it _ends_ after the 1st
xfer, that is _after_ the read has started. This should guarantee a
reasonably fresh data, which value represents the voltage that the sampled
signal has after the read start or maybe just around it.
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Charles-Antoine Couret <charles-antoine.couret@essensium.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Do not power-off accel unconditionally if wake-up events are enabled
powering off the hw FIFO. At the same time do not power-off the accel
sensor if it is 'batched' in the hw FIFO disabling sensor events
Fixes: b5969abfa8b8 ("iio: imu: st_lsm6dsx: add motion events")
Tested-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
