summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-19Bluetooth: Add framework for Extended Controller InformationMarcel Holtmann
This command is used to retrieve the current state and basic information of a controller. It is typically used right after getting the response to the Read Controller Index List command or an Index Added event (or its extended counterparts). When any of the values in the EIR_Data field changes, the event Extended Controller Information Changed will be used to inform clients about the updated information. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
2016-09-19Bluetooth: btusb: Mark CW6622 devices to have broken link key commandsSzymon Janc
Conwise CW6622 seems to have a problem with the stored link key commands so just mark it as broken. < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 > HCI Event: Command Complete (0x0e) plen 12 Read Local Supported Features (0x04|0x0003) ncmd 1 status 0x00 Features: 0xff 0x3e 0x85 0x38 0x18 0x18 0x00 0x00 < HCI Command: Read Local Version Information (0x04|0x0001) plen 0 > HCI Event: Command Complete (0x0e) plen 12 Read Local Version Information (0x04|0x0001) ncmd 1 status 0x00 HCI Version: 2.0 (0x3) HCI Revision: 0x1f4 LMP Version: 2.0 (0x3) LMP Subversion: 0x1f4 Manufacturer: CONWISE Technology Corporation Ltd (66) ... < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 status 0x00 Commands: 7fffef03cedfffffffffff1ff20ff8ff3f ... < HCI Command: Read Stored Link Key (0x03|0x000d) plen 7 bdaddr 00:00:00:00:00:00 all 1 > HCI Event: Command Complete (0x0e) plen 8 Read Stored Link Key (0x03|0x000d) ncmd 1 status 0x11 max 0 num 0 Error: Unsupported Feature or Parameter Value Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar
The workqueue "workqueue" queues multiple work items viz &qca->ws_awake_rx &qca->ws_rx_vote_off, &qca->ws_awake_device, &qca->ws_tx_vote_off which require strict execution ordering. Hence, an ordered dedicated workqueue has been used to replace the deprecated create_singlethread_workqueue instance. WQ_MEM_RECLAIM has not been set since the driver is not being used on a memory reclaim path. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Handle HCI raw socket transition from unbound to boundMarcel Holtmann
In case an unbound HCI raw socket is later on bound, ensure that the monitor notification messages indicate a close and re-open. None of the userspace tools use the socket this, but it is actually possible to use an ioctl on an unbound socket and then later bind it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Send control open and close messages for HCI raw socketsMarcel Holtmann
When opening and closing HCI raw sockets their main usage is for legacy userspace. To track interaction with the modern mgmt interface, send open and close monitoring messages for these action. The HCI raw sockets is special since it supports unbound ioctl operation and for that special case delay the notification message until at least one ioctl has been executed. The difference between a bound and unbound socket will be detailed by the fact the HCI index is present or not. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Add extra channel checks for control open/close messagesMarcel Holtmann
The control open and close monitoring events require special channel checks to ensure messages are only send when the right events happen. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Assign the channel early when binding HCI socketsMarcel Holtmann
Assignment of the hci_pi(sk)->channel should be done early when binding the HCI socket. This avoids confusion with the RAW channel that is used for legacy access. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Send control open and close only when cookie is presentMarcel Holtmann
Only when the cookie has been assigned, then send the open and close monitor messages. Also if the socket is bound to a device, then include the index into the message. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Use numbers for subsystem version stringMarcel Holtmann
Instead of keeping a version string around, use version and revision numbers and then stringify them for use as module parameter. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Introduce helper functions for socket cookie handlingMarcel Holtmann
Instead of manually allocating cookie information each time, use helper functions for generating and releasing cookies. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: add WCNSS dependency for HCI driverArnd Bergmann
The newly added bluetooth driver is based on the soc-specific support, but lacks the obvious compile-time dependency on that: drivers/bluetooth/btqcomsmd.o: In function `btqcomsmd_probe': btqcomsmd.c:(.text.btqcomsmd_probe+0x40): undefined reference to `qcom_wcnss_open_channel' btqcomsmd.c:(.text.btqcomsmd_probe+0x5c): undefined reference to `qcom_wcnss_open_channel' Makefile:969: recipe for target 'vmlinux' failed Fixes: 90c107dc8b2c ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Use command status event for Set IO Capability errorsMarcel Holtmann
In case of failure, the Set IO Capability command is suppose to return command status and not command complete. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Fix wrong Get Clock Information return parametersMarcel Holtmann
The address information of the Get Clock Information return parameters is copying from a different memory location. It uses &cmd->param while it actually needs to be cmd->param. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Use individual flags for certain management eventsMarcel Holtmann
Instead of hiding everything behind a general managment events flag, introduce indivdual flags that allow fine control over which events are send to a given management channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: mgmt: Fix sending redundant event for Advertising InstanceJohan Hedberg
When an Advertising Instance is removed, the Advertising Removed event shouldn't be sent to the same socket that issued the Remove Advertising command (it gets a command complete event instead). The mgmt_advertising_removed() function already has a parameter for skipping a specific socket, but there was no code to propagate the right value to this parameter. This patch fixes the issue by making sure the intermediate hci_req_clear_adv_instance() function gets the socket pointer. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add support for sending MGMT commands and events to monitorMarcel Holtmann
This adds support for tracing all management commands and events via the monitor interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Add support for sending MGMT open and close to monitorMarcel Holtmann
This sends new notifications to the monitor support whenever a management channel has been opened or closed. This allows tracing of control channels really easily. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Introduce helper to pack mgmt version informationMarcel Holtmann
The mgmt version information will be also needed for the control changell tracing feature. This provides a helper to pack them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Store control socket cookie and comm informationMarcel Holtmann
To further allow unique identification and tracking of control socket, store cookie and comm information when binding the socket. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Check SOL_HCI for raw socket optionsMarcel Holtmann
The SOL_HCI level should be enforced when using socket options on the HCI raw socket interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: bcm203x: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: btusb: Add support for 0cf3:e009Kai-Heng Feng
Device 0cf3:e009 is one of the QCA ROME family. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e009 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: add printf format attribute to hci_set_[fh]w_info()Nicolas Iooss
Commit 5177a83827cd ("Bluetooth: Add debugfs fields for hardware and firmware info") introduced hci_set_hw_info() and hci_set_fw_info(). These functions use kvasprintf_const() but are not marked with a __printf attribute. Adding such an attribute helps detecting issues related to printf-formatting at build time. Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: btusb, hci_intel: Fix wait_on_bit_timeout() return value checksBart Van Assche
wait_on_bit_timeout() returns one of the following three values: * 0 to indicate success. * -EINTR to indicate that a signal has been received; * -EAGAIN to indicate timeout; Make the wait_on_bit_timeout() callers check for these values. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driverBjorn Andersson
The Qualcomm WCNSS chip provides two SMD channels to the BT core; one for command and one for event packets. This driver exposes the two channels as a hci device. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add HCI device identifier for Qualcomm SMDBjorn Andersson
This patch assigns the next free HCI device identifier to Bluetooth devices based on the Qualcomm Shared Memory channels. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19mac802154: use rate limited warnings for malformed framesAristeu Rozanski
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19mac802154: don't warn on unsupported framesAristeu Rozanski
Just because we don't support certain types of frames yet doesn't mean we have to flood the message log with warnings about "invalid" frames. Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-196lowpan: ndisc: no overreact if no short address is availableAlexander Aring
This patch removes handling to remove short address for a neigbour entry if RS/RA/NS/NA doesn't contain a short address. If these messages doesn't has any short address option, the existing short address from ndisc cache will be used. The current behaviour will set that the neigbour doesn't has a short address anymore. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19mac802154: set phy net namespace for new ifacesAlexander Aring
This patch sets the net namespace when creating SoftMAC interfaces. This is important if the namespace at phy layer was switched before. Currently we losing interfaces in some namespace and it's not possible to recover that. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add combined LED trigger for controller powerMarcel Holtmann
Instead of just having a LED trigger for power on a specific controller, this adds the LED trigger "bluetooth-power" that combines the power states of all controllers into a single trigger. This simplifies the trigger selection and also supports multiple controllers per host system via a single LED. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Put led_trigger field behind CONFIG_BT_LEDSMarcel Holtmann
The led_trigger field in hci_dev should be conditional based on if CONFIG_BT_LEDS is set or not. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19[media] cx23885/saa7134: assign q->dev to the PCI deviceHans Verkuil
Fix a regression caused by commit 2bc46b3ad3c1 ("[media] media/pci: convert drivers to use the new vb2_queue dev field"). Three places where q->dev should be set were missed, causing a WARN. Fixes: 2bc46b3ad3c1 ("[media] media/pci: convert drivers to use the new vb2_queue dev field"). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Marton Balint <cus@passwd.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19can: flexcan: fix resume functionFabio Estevam
On a imx6ul-pico board the following error is seen during system suspend: dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110 PM: Device 2090000.flexcan failed to resume: error -110 The reason for this suspend error is because when the CAN interface is not active the clocks are disabled and then flexcan_chip_enable() will always fail due to a timeout error. In order to fix this issue, only call flexcan_chip_enable/disable() when the CAN interface is active. Based on a patch from Dong Aisheng in the NXP kernel. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-09-19xfrm: Fix memory leak of aead algorithm nameIlan Tayari
commit 1a6509d99122 ("[IPSEC]: Add support for combined mode algorithms") introduced aead. The function attach_aead kmemdup()s the algorithm name during xfrm_state_construct(). However this memory is never freed. Implementation has since been slightly modified in commit ee5c23176fcc ("xfrm: Clone states properly on migration") without resolving this leak. This patch adds a kfree() call for the aead algorithm name. Fixes: 1a6509d99122 ("[IPSEC]: Add support for combined mode algorithms") Signed-off-by: Ilan Tayari <ilant@mellanox.com> Acked-by: Rami Rosen <roszenrami@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-09-19drm: Only use compat ioctl for addfb2 on X86/IA64Kristian H. Kristensen
Similar to struct drm_update_draw, struct drm_mode_fb_cmd2 has an unaligned 64 bit field (modifier). This get packed differently between 32 bit and 64 bit modes on architectures that can handle unaligned 64 bit access (X86 and IA64). Other architectures pack the structs the same and don't need the compat wrapper. Use the same condition for drm_mode_fb_cmd2 as we use for drm_update_draw. Note that only the modifier will be packed differently between compat and non-compat versions. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org> [seanpaul added not at bottom of commit msg re: modifier] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1473801645-116011-1-git-send-email-hoegsberg@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-09-19Merge tag 'rxrpc-rewrite-20160917-2' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Tracepoint addition and improvement Here is a set of patches that add some more tracepoints and improve a couple of existing ones. New additions include: (1) Connection refcount tracking. (2) Client connection state machine tracking. (3) Tx and Rx packet lifecycle. (4) ACK reception and transmission. (5) recvmsg processing. Updates include: (1) Print the symbolic packet name in the Rx packet tracepoint. (2) Additional call refcount trace events. (3) Improvements to sk_buff tracking with AF_RXRPC. In addition: (1) Config option to inject packet loss during both transmission and reception. (2) Removal of some printks. This series needs to be applied on top of the previously posted fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19Merge tag 'rxrpc-rewrite-20160917-1' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Fixes & miscellany Here are some more AF_RXRPC fix patches with a couple of miscellaneous changes also. Fixes include: (1) Make RxRPC IPv6 support conditional on IPv6 being available. (2) Move the condition check in rxrpc_locate_data() into the caller and check the error return. (3) Fix the detection of the last received packet in recvmsg. (4) Account calls that need acceptance and clean up any unaccepted ones if the socket gets closed. (5) Fix the cleanup of client connections. (6) Fix the soft-ACK parsing and the retransmission of packets based on those ACKs. (7) Suppress transmission of an ACK when there's no pending ACK to transmit because another thread stole it. And some miscellany: (8) Whitespace removal. (9) Switch-value consistency in rxrpc_send_call_packet(). (10) Fix the basic transmission packet size to allow for spur-of-the-moment jumbo DATA packet production. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19Merge branch 'net-sched-singly-linked-list'David S. Miller
Florian Westphal says: ==================== sched: convert queues to single-linked list During Netfilter Workshop 2016 Eric Dumazet pointed out that qdisc schedulers use doubly-linked lists, even though single-linked list would be enough. The double-linked skb lists incur one extra write on enqueue/dequeue operations (to change ->prev pointer of next list elem). This series converts qdiscs to single-linked version, listhead maintains pointers to first (for dequeue) and last skb (for enqueue). Most qdiscs don't queue at all and instead use a leaf qdisc (typically pfifo_fast) so only a few schedulers needed changes. I briefly tested netem and htb and they seemed fine. UDP_STREAM netperf with 64 byte packets via veth+pfifo_fast shows a small (~2%) improvement. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19sched: add and use qdisc_skb_head helpersFlorian Westphal
This change replaces sk_buff_head struct in Qdiscs with new qdisc_skb_head. Its similar to the skb_buff_head api, but does not use skb->prev pointers. Qdiscs will commonly enqueue at the tail of a list and dequeue at head. While skb_buff_head works fine for this, enqueue/dequeue needs to also adjust the prev pointer of next element. The ->prev pointer is not required for qdiscs so we can just leave it undefined and avoid one cacheline write access for en/dequeue. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19sched: replace __skb_dequeue with __qdisc_dequeue_headFlorian Westphal
After previous patch these functions are identical. Replace __skb_dequeue in qdiscs with __qdisc_dequeue_head. Next patch will then make __qdisc_dequeue_head handle single-linked list instead of strcut sk_buff_head argument. Doesn't change generated code. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19sched: remove qdisc arg from __qdisc_dequeue_headFlorian Westphal
Moves qdisc stat accouting to qdisc_dequeue_head. The only direct caller of the __qdisc_dequeue_head version open-codes this now. This allows us to later use __qdisc_dequeue_head as a replacement of __skb_dequeue() (which operates on sk_buff_head list). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19sched: don't use skb queue helpersFlorian Westphal
A followup change will replace the sk_buff_head in the qdisc struct with a slightly different list. Use of the sk_buff_head helpers will thus cause compiler warnings. Open-code these accesses in an extra change to ease review. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19pie: use qdisc_dequeue_head wrapperFlorian Westphal
Doesn't change generated code. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19cxgb4: Fix return value check in cfg_queues_uld()Wei Yongjun
Fix the retrn value check which testing the wrong variable in cfg_queues_uld(). Fixes: 94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19Merge branch 'mediatek-hw-lro'David S. Miller
Nelson Chang says: ==================== net: ethernet: mediatek: add HW LRO functions The series add the large receive offload (LRO) functions by hardware and the ethtool functions to configure RX flows of HW LRO. changes since v3: - Respin the patch by the newer driver - Move the dts description of hwlro to optional properties changes since v2: - Add ndo_fix_features to prevent NETIF_F_LRO off while RX flow is programmed - Rephrase the dts property is a capability if the hardware supports LRO changes since v1: - Add HW LRO support - Add ethtool hooks to set LRO RX flows ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19net: ethernet: mediatek: add the dts property to set if the HW supports LRONelson Chang
Add the dts property for the capability if the hardware supports LRO. Signed-off-by: Nelson Chang <nelson.chang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRONelson Chang
The codes add ethtool functions to set RX flows for HW LRO. Because the HW LRO hardware can only recognize the destination IP of TCP/IP RX flows, the ethtool command to add HW LRO flow is as below: ethtool -N [devname] flow-type tcp4 dst-ip [ip_addr] loc [0~1] Otherwise, cause the hardware can set total four destination IPs, each GMAC (GMAC1/GMAC2) can set two IPs separately at most. Signed-off-by: Nelson Chang <nelson.chang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19net: ethernet: mediatek: add HW LRO functions of PDMA RX ringsNelson Chang
The codes add the large receive offload (LRO) functions by hardware as below: 1) PDMA has total four RX rings that one is the normal ring, and others can be configured as LRO rings. 2) Only TCP/IP RX flows can be offloaded. The hardware can set four IP addresses at most, if the destination IP of the RX flow matches one of them, it has the chance to be offloaded. 3) There three RX flows can be offloaded at most, and one flow is mapped to one RX ring. 4) If there are more than three candidate RX flows, the hardware can choose three of them by throughput comparison results. Signed-off-by: Nelson Chang <nelson.chang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19chcr/cxgb4i/cxgbit/RDMA/cxgb4: Allocate resources dynamically for all cxgb4 ↵Hariprasad Shenai
ULD's Allocate resources dynamically to cxgb4's Upper layer driver's(ULD) like cxgbit, iw_cxgb4 and cxgb4i. Allocate resources when they register with cxgb4 driver and free them while unregistering. All the queues and the interrupts for them will be allocated during ULD probe only and freed during remove. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 11:10:34 +0000